Insignia NS-CAHBTSPORT/NS-CAHBTSPORT-C Bluetooth Sport Headphones Guide d'installation rapide

Marque: Insignia

Modèle: NS-CAHBTSPORT/NS-CAHBTSPORT-C Bluetooth Sport Headphones

Catégorie: Casques mobiles

Taper: Guide d'installation rapide

Ce manuel convient également à

NS-CAHBTSPORT

PACKAGE CONTENTS

• Bluetooth Sport Headphones

• USB charging cable

• Extra S/L earbuds

• Quick Setup Guide

FEATURES

• Bluetooth 4.1 • In-line control, built-in mic

• Up to eight hours battery • MicroUSB charging

life for music playback

CHANGING YOUR EARBUDS

1 Grip the earbud in one hand and the ear tip in the other, then twist and pull to remove the

ear tip from the ear bud. Repeat for the other ear bud.

2 Select the correct size ear tips for your ears.

3 Still holding the ear bud in one hand, place the new ear tip over the ear bud and press

together until joined. Repeat for the other ear bud.

4 Place the assembled ear bud in your ear and turn clockwise until comfortable.

Bluetooth version:

Supported proles:

Frequency spectrum:

Working distance:

Operating

temperature:

Bluetooth 4.1

A2DP, AVRCP, HFP, HSP

2.4 ~ 2.4835 GHz

ISM Band

Up to 33 ft. (10 m)

23 ~ 122° F

(-5 ~ 50° C)

Operating time:

Standby time:

Weight:

Average charging

time:

Talk: 9 hours

Music: 8 hours,

playback music track

200 hours

0.511 oz (14.5g)

2 hours

CHARGING YOUR HEADPHONES

• The red indicator LED blinks three times a minute when the battery is low. To charge the

battery, plug the microUSB charging cable into your computer and into the microUSB port on

your earbuds. The red LED turns on to indicate that the battery is charging and turns o when

fully charged.

USING YOUR HEADPHONES

Turning your earbuds on and o

1 Place the earbud cable around your neck. The inline control falls naturally in front of your right

shoulder.

2 Press and hold the MFB for three seconds. The LED blinks blue (when turned on) or red (when

turned o) and the voice prompt says “Power on”, or “Power o.”

BLUETOOTH BASIC INDICATION

Before using your new product, please read these instructions to prevent any damage.

PAIRING YOUR HEADPHONES

Notes:

• Range is 33 feet (10 meters)

• Supports easy pairing

• Prompts you by saying “Your Device is Connected,” when connected

• Supports a battery indicator icon on an iOS device

Pairing with a cell phone or MP3 player

1 With your earbuds turned o, press and hold the MFB for four seconds. The blue and red LEDs

blink alternately.

2 On your phone or MP3 player, select NS-CAHBTSPORT from the list of discovered devices, then

enter the password 0000 (four zeros) (if required) to pair your earbuds.

For more information on pairing Bluetooth devices to your cell phone or MP3 player, see the

device’s documentation.

Note: After the earbuds have been successfully paired with the cell phone or MP3 player, the earbuds will

automatically reconnect to the phone or MP3 player.

Pairing with a computer running Windows

Note: Before you pair the earbuds with the computer, make sure that the computer is equipped with Bluetooth. Refer

to the computer’s documentation or contact the computer manufacturer for more information. If your computer is not

Bluetooth compatible, install a Bluetooth USB adapter (dongle).

1 Turn on Bluetooth on the computer. For instructions, see the computer’s documentation or

contact the computer manufacturer.

2 Double-click the Bluetooth icon in the system tray, then click Add a device (Add Wireless

Device using Windows Vista).

3 With the earbuds turned o, press and hold the MFB for four seconds. The LED blinks blue and red

alternately. Pairing mode is activated.

4 Double-click the NS-CAHBTSPORT icon on the computer or highlight the icon, then click Next.

Note: If you are unable to locate the NS-CAHBTSPORT icon, click the Search Again button.

5 If required, enter 0000 (four zeros) in the Bluetooth security code eld, then click Next.

6 After the earbuds have been paired, click Close.

Pairing with a Mac computer

Note: Before you pair the headphones with the computer, make sure that the computer is Bluetooth compatible.

Refer to the computer’s documentation or contact the computer manufacturer for more information. If your computer

is not Bluetooth compatible, install a Bluetooth USB adapter (dongle).

1 Turn on Bluetooth on the computer. For instructions, see the computer’s documentation or

contact the computer manufacturer.

2 Click the Bluetooth status menu.

3 Click Set up Bluetooth Device. The Bluetooth Setup Assistant opens.

4 Click Continue.

5 Select Headset as the device type, then click Continue.

6 With the earbuds turned o, press and hold the MFB for four seconds. The LED blinks blue and

red alternately. Pairing mode is activated.

7 Select NS-CAHBTSPORT, then click Continue. The computer gathers information.

8 Click Continue.

9 Enter 0000 (four zeros) into the Passkey eld, then click Continue.

10 Click Quit to nish.

Note: To use the earbuds, they must be selected as the default input and output device on the computer.

11 Click System Preferences, then click Sound.

12 Under Input, select NS-CAHBTSPORT, then under Output, select NS-CAHBTSPORT.

RESETTING YOUR HEADPHONES

• To reset your earbuds, with your earbuds turned o, press and hold the MFB for 10 seconds.

SPECIFICATIONS

TROUBLESHOOTING

• Reset your Bluetooth headphone

• Plug microUSB cable for charging

LEGAL NOTICES

FCC statement:

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this

device may not cause harmful interference, and (2) this device must accept any interference received, including

interference that may cause undesired operation.

FCC Caution:

Changes or modications not expressly approved by the party responsible for compliance could void the user’s

authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to

Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in

a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not

installed and used in accordance with the instructions, maybe cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does

cause harmful interference to radio or television reception, which can be determined by turning the equipment o

and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit dierent form that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

RSS-Gen & RSS-247 Statement:

This device complies with Industry Canada licence exempt RSS standard(s).

Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this

device must accept any interference, including interference that may cause undesired operation of the device.

Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence.

L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2)

l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible

d'en compromettre le fonctionnement.

RSS-102 Statement:

This equipment complies with Industry Canada radiation exposure limits set forth for an uncontrolled environment.

Cet équipement est conforme à l'exposition aux rayonnements Industry Canada limites établies pour un

environnement non contrôlé.

ONEYEAR LIMITED WARRANTY

Visit www.insigniaproducts.com for details.

CONTACT INSIGNIA:

1-877-467-4289 (U.S. and Canada)

01-800-926-3000 (Mexico)

www.insigniaproducts.com

INSIGNIA is a trademark of Best Buy and its aliated companies, Distributed by Best Buy Purchasing, LLC, 7601 Penn

ACTION

Power on

Power o

Pairing mode

Play/Pause

Volume Up/Down

Next Track/

Previous Track

Incoming call

Answer call

Reject call

Redial

Reset device list

OPERATION

Press and hold the MFB more

than two seconds

Press and hold the MFB more

than three seconds

Press and hold the MFB more

than four seconds in power o

mode

Press and release the MFB

Press and release  / 

button

Press and hold  /  button

Press and release the MFB

when a call is incoming

Press and hold the MFB when

a call is incoming

Double press the MFB

Press and hold the MFB more

than 10 seconds in power o

mode

LED INDICATION

Blue LED on 1.5 seconds

Red LED on 1.5 seconds

Blue and red LED

blinking alternately

Blue LED blinks three

times every ve seconds

when a call is received

Red LED ashes 10 times

when reset to default

SOUND

“power on”

“power o”

Two short beeps

Two high beeps

for maximum

volume.

Ring tones

One short beep

Two long beeps

Two short beeps

# DESCRIPTION

1  Volume Up

Next Track

2 Micro USB port

3 Multi-function button

(MFB) (Power/Talk/Play/

Pause/Pairing)

4  Volume Down

Previous Track

5 Indicator LED

6 Microphone

FUNCTION

Press  to increase the volume.

In playback mode, press and hold  to skip to the next

track.

Plug the micro USB connector into this port to charge

your earbuds.

Press to turn on your earbuds. If you receive a phone call,

press to talk. Press to turn o your earbuds.

Press  to decrease the volume.

In playback mode, press and hold  to skip to the

previous track.

Shows current status of the earbuds.

Allows you to talk on the telephone.

ACTION

Sous tension

Hors tension

Mode de

couplage

Lecture/Pause

Volume +/-

Piste suivante/

Piste précédente

Appel entrant

Répondre à un

appel

Refuser un appel

Recomposition

Réinitialisation

de la liste des

périphériques

FONCTIONNEMENT