Yamaha RX-A2010 Le manuel du propriétaire

En 1

AV Receiver

Owner’s Manual

English for Canada, Europe, Asia, Africa, Oceania and Latin America

Be sure to read “Safety Brochure” (supplied booklet) before using this unit.

En 2

CONTENTS

Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

What you can do with this unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Part names and functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Front panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Front display (indicators) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10

Rear panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11

Remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12

General setup procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

1 Connecting speakers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Basic speaker configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16

Advanced speaker configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21

Input/output jacks and cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

2 Connecting a TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

3 Connecting playback devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

Connecting video devices (BD/DVD players, etc.) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35

Connecting audio devices (CD players, etc.) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37

Connecting to the jacks on the front panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38

4 Connecting the FM/AM antennas . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

5 Connecting to the network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40

6 Connecting other devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41

Connecting video/audio recording devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .41

Connecting a device with analog multi-channel output . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .41

Connecting a device compatible with SCENE link playback (remote connection) . . . . . . . . . . . . . . . . . . .42

Connecting a device compatible with the trigger function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42

7 Connecting the power cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43

8 Selecting an on-screen menu language . . . . . . . . . . . . . . . . . . . . . . . . 44

9 Optimizing the speaker settings automatically (YPAO) . . . . . . . . . 45

Measuring at one listening position (single measure) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47

Measuring at multiple listening positions (multi measure) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48

Checking the measurement results . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49

Reloading the previous YPAO results . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49

Error messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50

Warning messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51

Basic playback procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52

Selecting an HDMI output jack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52

Selecting the input source and favorite settings at once (SCENE) . . 53

Configuring scene assignments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54

Selecting the sound mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55

Enjoying sound field effects (CINEMA DSP) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56

Enjoying unprocessed playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58

Enjoying pure high fidelity sound (Pure Direct) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59

Enjoying compressed music with enhanced sound (Compressed Music Enhancer) . . . . . . . . . . . . . . . . . 59

Enjoying surround sound with headphones (SILENT CINEMA) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59

Listening to FM/AM radio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60

Setting the frequency steps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60

Selecting a frequency for reception . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60

Registering favorite radio stations (preset) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61

Radio Data System tuning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62

Operating the radio on the TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63

Playing back iPod music/videos . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65

Connecting an iPod . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65

Playback of iPod contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67

FEATURES

SETUP

PLAYBACK

En 3

Playing back music via Bluetooth . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70

Connecting a Bluetooth receiver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .70

Pairing Bluetooth components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .70

Establishing a wireless connection and playing back . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .71

Playing back music stored on a USB storage device . . . . . . . . . . . . . . 72

Connecting a USB storage device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .72

Playback of USB storage device contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .72

Playing back music stored on PCs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75

Media sharing setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .75

Playback of PC music contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .75

Listening to Internet radio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78

Playing back music in multiple rooms (multi-zone) . . . . . . . . . . . . . . . 80

Preparing for Zone2 or Zone3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .80

Controlling Zone2 or Zone3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .84

Useful functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86

Registering favorite items (shortcut) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .86

Controlling this unit from the web browser (web control) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .87

Viewing the current status . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .89

Configuring settings in accordance with a playback source (Option menu)

. . . 90

Option menu items . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .90

Configuring input sources (Input menu) . . . . . . . . . . . . . . . . . . . . . . . . . 93

Input menu items . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .93

Configuring the SCENE function (Scene menu) . . . . . . . . . . . . . . . . . . . 95

Scene menu items . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .96

Configuring sound programs/surround decoders (Sound Program menu)

. . . . 98

Sound Program menu items . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .99

Configuring various functions (Setup menu) . . . . . . . . . . . . . . . . . . . . 101

Setup menu items . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102

Speaker (Manual Setup) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104

Sound . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108

Video . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 109

HDMI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 111

Network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 112

Multi Zone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113

Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 115

Language . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 117

Viewing information about this unit (Information menu) . . . . . . . . 118

Types of information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 118

Configuring the system settings (ADVANCED SETUP menu) . . . . . 119

ADVANCED SETUP menu items . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120

Changing the speaker impedance setting (SPEAKER IMP.) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120

Turning on/off the remote control sensor (REMOTE SENSOR) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120

Selecting the remote control ID (REMOTE CON AMP) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120

Changing the frequency step setting (TUNER FRQ STEP) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 121

Switching the video signal type (TV FORMAT) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 121

Removing the limitation on HDMI video output (MONITOR CHECK) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 121

Backing up/recovering the settings (RECOV./BACKUP) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 122

Restoring the default settings (INITIALIZE) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 122

Updating the firmware (FIRM UPDATE) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 122

Checking the firmware version (VERSION) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 122

Controlling external devices with the remote control . . . . . . . . . . . 123

Setting remote control codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 123

Programming from other remote controls (learning) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 125

Editing device names . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 126

Operating multiple functions at once (macro) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 127

Resetting the remote control configurations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 129

Using the simplified remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . 131

Updating the firmware of this unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 132

CONFIGURATIONS

En 4

Frequently asked questions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 133

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 134

Power and system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 134

Audio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 135

Video . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 136

FM/AM radio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 137

USB and network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 137

Remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 138

Error indications on the front display . . . . . . . . . . . . . . . . . . . . . . . . . . . 139

Glossary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 140

Audio information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 140

Video information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 142

Video signal flow . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 143

Information on HDMI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 144

HDMI Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 144

HDMI signal compatibility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 145

Reference diagram (rear panel) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 146

Trademarks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 147

Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 148

APPENDIX

En 5

Accessories

Check that the following accessories are supplied with this product.

■ Remote control ■ Batteries (AAA, R03, UM-4) (x 4)

Insert into the remote control in the correct polarity (+/-)

■ Simplified

remote control

■ Power cable

* The figure of the supplied power

cable differs depending on regions.

■ YPAO microphone

■ AM antenna ■ FM antenna

* The figure of the supplied FM antenna differs depending

on regions.

■ Easy Setup Guide ■ Safety Brochure ■

CD-ROM (Owner’s Manual)

Operating range of the remote control

• Aim the remote control directly at the remote control sensor on this unit during operation.

• Some features are not available in certain regions.

• Design and specifications are subject to change in part as a result of improvements, etc. In case of

differences between the manual and product, the product has priority.

• This manual mainly explains operations using the supplied remote control.

• This manual describes both the “iPod” and “iPhone” as the “iPod”. “iPod” means both “iPod” and

“iPhone” unless the explanation describes exceptions.

• “ ” indicates the cautions concerning operations or setup of the unit.

• “ ” indicates the explanations for better use.

30° 30°

Within 6 m

En 6

FEATURES

What you can do with this unit

Supports 2 to 9 channel speaker system and up

to 2 subwoofer connections. Allows you to enjoy

favorite acoustic spaces in various styles.

Plus, bi-amp connections, channel

expansion (with external power-amp)

and multi-zone configurations to

enhance your system

p.21

Automatically optimizing the speaker

settings to suit your room (YPAO)

p.45

Sound field reproductions like actual

movie theaters and concert halls from

stereo or multi-channel audio sources

(CINEMA DSP)

p.56

Enjoying compressed music with

enhanced sound (Compressed Music

Enhancer)

p.59

Ready for any kind of contents

iPod

p.65

Network

p.75 to p.78

USB

p.72

Bluetooth

p.70

*Requires optional Bluetooth receiver for playback via Bluetooth

Operating external

devices with the supplied

remote control

p.123

Operating the TV, AV

receiver and BD/DVD

player in combination

(HDMI Control)

p.144

Selecting the input source and favorite

settings at once (SCENE)

p.53

AV receiver (this unit)

Speakers

USB device

Network contents

via Bluetooth

iPod

BD/DVD player

HDMI Control

Audio/Video

Remote control

of this unit

TV remote control

Audio

HDMI Control

Audio

Video

TV

En 7

Full of useful functions!

● Connecting various devices (p.35)

A number of HDMI jacks and various input/output jacks

on this unit allow you to connect video devices such as

BD/DVD players, audio devices such as CD players,

game consoles and camcorders, and so on.

● Playing back TV audio in surround sound

with a single HDMI cable connection

(Audio Return Channel: ARC) (p.29)

When using a TV that supports ARC, you only need a

single HDMI cable to connect the TV and this unit to

output video to the TV, input audio from the TV, and

transmit HDMI Control signals.

● Creating stereoscopic sound fields (p.58)

Connection of presence speakers enables to create a

natural stereoscopic sound field in your room (CINEMA

DSP 3D). Even when no presence speakers are

connected, this unit automatically creates Virtual

Presence Speaker (VPS) to produce 3D surround

sound.

● Listening to FM/AM radio (p.60)

This unit is equipped with the built-in FM/AM tuner. You

can register favorite radio stations as presets.

● Enjoying pure high fidelity sound (p.59)

When the Pure Direct mode is enabled, this unit plays

back the selected source with the least circuitry. It

allows you to enjoy Hi-Fi sound quality.

● Easy operation with a TV screen

You can navigate the various contents (iPod, USB,

network, etc.), view the information, or configure the

settings using the on-screen menu.

At time like this

I want to connect a playback device using HDMI for video

and non-HDMI for audio...

Use “Audio Select” in the “Option” menu to specify the type

of an audio input jack to be used for the corresponding

input source (p.92).

Video and audio are not synchronized...

Use “Lipsync” in the “Setup” menu to adjust the delay

between video and audio output (p.108).

I want to hear audio from the TV speakers...

Use “Audio Output” in the “Setup” menu to select whether

to output audio signals through this unit and the TV (p.112).

I want to this unit to be turned off automatically when not in

use...

Use “Auto Power Down” in the “Setup” menu to set the

amount of time for auto-standby (p.115).

I want to change the on-screen menu language...

Use “Language” in the “Setup” menu to select a language

from English, Japanese, French, German, Spanish and

Russian (p.117).

I want to update the firmware...

Use “UPDATE” in the “ADVANCED SETUP” menu to update

the firmware of this unit (p.122). If this unit is connected to

the Internet, the corresponding message will be displayed

on the TV when a newer firmware is available (p.132).

There are many other settings to customize this unit.

For details, see the following pages.

●Input settings (p.93)

●Scene settings (p.96)

●Sound program and surround decoder settings (p.99)

●Various function settings (p.102)

●Information view (audio signal, video signal, etc.) (p.118)

●System settings (p.120)

Turntable

BD/DVD

player

Game

console

Camcorder

TV

CD player

HDMI Control

TV audio

Video from

external device

En 8

Front panel

1 MAIN ZONE

Turns on/off (standby) this unit.

2 Standby indicator

Lights up when this unit is in standby mode under any of the

following conditions.

- HDMI Control is enabled (p.144)

- The standby through function is enabled (p.112)

- The network standby function is enabled (p.113)

- The iPod is being charged (p.94)

- An iPod wireless system is connected (p.66)

3 Front display

Displays information (p.10).

4 Remote control sensor

Receives remote control signals (p.5).

5 PURE DIRECT

Enables/disables Pure Direct (p.59).

6 INPUT

Selects an input source.

7 Front panel door

For protecting controls and jacks (p.9).

8 VOLUME

Adjusts the volume.

Part names and functions

SCENE

MULTI ZONE

HDMI IN

VIDEO AUX

TONE/BALANCEOPTIONON SCREEN

DISPLAYRETURN

STRAIGHT

1

ENTER

ZONE 2 ZONE 3

2 3 4

ZONE CONTROL

INFO MEMORY

YPAO MIC

PHONES

SILENT CINEMA

USB

iPod/iPhone

PROGRAM TUNING/CH

PRESET

ROPTICALL AUDIOVIDEOS VIDEO

PURE DIRECT

VOLUMEINPUT

MAIN ZONE

NATURAL SOUND AV RECEIVER RX-A2010

FM AM

5321

6 7 8

4

Opening the front panel door

• To use controls or jacks behind the front panel door, gently

press the bottom of the door to open it. Keep the door closed

when not using controls or jacks behind the front panel door.

En 9

■ Inside of the front panel cover

9 ON SCREEN

Displays the on-screen menu on the TV.

0 Menu operation keys

Cursor keys Select a menu or parameter.

ENTER Confirms a selected item.

RETURN Returns to the previous screen.

A OPTION

Displays the option menu (p.90).

B DISPLAY

Display the status information on the TV (p.89).

C TONE/BALANCE

Adjusts the high-frequency range and low-frequency range

of sounds output from speakers and headphones (p.91).

Adjusts the right/left channel volume balance for Zone2 or

Zone3 (p.85).

D STRAIGHT

Enables/disables the straight decode mode (p.58).

E PROGRAM

Selects a sound program or a surround decoder (p.55).

F SCENE

Selects the registered input source, sound program, HDMI

output and various settings at once. Additionally, you can

turn on this unit when it is in standby mode (p.53).

G MULTI ZONE

ZONE 2~3 Enables/disables the audio output to

each zone (p.84).

ZONE CONTROL Switches the zones (main, Zone2 or

Zone3) to operate with the front panel

controllers (p.84).

H INFO

Selects the information displayed on the front display (p.89).

I MEMORY

Registers FM/AM radio stations as preset stations (p.61).

Registers USB/network contents as shortcuts (p.86).

J FM/AM

Switches between FM and AM (p.60).

K PRESET

Selects a preset FM/AM radio station (p.61).

Selects a USB/network content from shortcuts (p.86).

L TUNING/CH

Selects the radio frequency (p.60).

M USB jack

For connecting a USB storage device (p.72) or an iPod via

USB (p.65).

N YPAO MIC jack

For connecting the supplied YPAO microphone (p.45).

O PHONES jack

For connecting headphones.

P VIDEO AUX jacks

For connecting camcorders, game consoles, etc (p.38).

SCENE

MULTI ZONE

HDMI IN

VIDEO AUX

TONE/BALANCEOPTIONON SCREEN

DISPLAYRETURN

STRAIGHT

1

ENTER

ZONE 2 ZONE 3

2 3 4

ZONE CONTROL

INFO MEMORY

YPAO MIC

PHONES

SILENT CINEMA

USB

iPod/iPhone

PROGRAM TUNING/CH

PRESET

ROPTICALL AUDIOVIDEOS VIDEO

FM AM

9 0 A CB D E F H I KJ L

M N O P

G

En 10

Front display (indicators)

1 HDMI

Lights up during normal HDMI communication.

IN

Lights up when HDMI signals are being input.

OUT1/OUT2

Indicate the HDMI OUT jacks currently outputting an HDMI

signal.

2 STEREO

Lights up when this unit is receiving a stereo FM radio signal.

TUNED

Lights up when this unit is receiving an FM/AM radio station

signal.

3 ZONE indicators

Light up when the audio output to Zone2 or Zone3 is

enabled.

4 PARTY

Lights up when this unit is in the party mode.

5 Information display

Displays the current status (input name, sound mode name,

etc). You can switch the information by pressing INFO (p.89).

6 MUTE

Flashes when audio is muted.

7 Volume indicator

Indicates the current volume.

8 ADAPTIVE DRC

Lights up when Adaptive DRC (p.91) is working.

9 ENHANCER

Lights up when Compressed Music Enhancer (p.59) is

working.

0 CINEMA DSP

Lights up when CINEMA DSP (p.56) is working.

CINEMA DSP

Lights up when CINEMA DSP 3D (p.58) is working.

A SLEEP

Lights up when the sleep timer is on.

B Cursor indicators

Indicate the remote control cursor keys currently operational.

C Speaker indicators

Indicate speaker terminals from which signals are output.

Front speaker (L)

Front speaker (R)

Center speaker

Surround speaker (L)

Surround speaker (R)

Surround back speaker (L)

Surround back speaker (R)

Surround back speaker

Front/rear presence speakers (L)

Front/rear presence speakers (R)

Subwoofer (1)

Subwoofer (2)

OUT

1

IN

OUT

2

VOLUME

MUTE

DRCADAPTIVE

3

ZONE

2

SBLPL SBRSB PR

SW1

SL

SW2

SR

PL

CL R

PR

STEREO

ENHANCER

SLEEP

TUNED PARTY

ZONE

3

2

876

0

9 BCB

1 43

5

A

3

En 11

Rear panel

1 PHONO jacks

For connecting a turntable (p.37).

2 DOCK jack

For connecting an optional Yamaha products such as iPod

dock (p.66), iPod wireless system (p.66), and Bluetooth

receiver (p.70).

3 AV1~4 jacks

For connecting video/audio playback devices to input video/

audio signals (p.35).

4 NETWORK jack

For connecting to the network (p.40).

5 AV OUT jacks

For outputting video/audio to a recording device (VCR, tape

deck, etc.) (p.41).

6 MONITOR OUT/ZONE OUT

(composite video/S-video) jacks

For connecting a TV compatible with composite video or

S-video to output video signals (p.33).

For connecting a zone video monitor (p.82).

7 HDMI OUT 1~2 jacks

For connecting HDMI-compatible TVs to output video/audio

signals (p.29). When using ARC, TV audio signal is input

through the HDMI OUT 1 jack.

8 COMPONENT VIDEO (AV1~4) jacks

For connecting video playback devices compatible with

component video to input video signals (p.36).

9 HDMI (AV1~7) jacks

For connecting HDMI-compatible playback devices to input

video/audio signals (p.35).

0 MONITOR OUT/ZONE OUT

(component video) jacks

For connecting a TV compatible with component video to

output video signals (p.33).

For connecting a zone video monitor (p.82).

A REMOTE 1~2 (IN/OUT) jacks

For connecting a Yamaha product compatible with SCENE

link playback (p.42), or connecting an infrared signal

receiver/emitter to operate devices including this unit from

another room (p.83).

B TRIGGER OUT 1~2 jacks

For connecting devices that support the trigger function

(p.42).

C RS-232C terminal

This is a control expansion terminal for custom installation.

Consult your dealer for details.

D VOLTAGE SELECTOR

(General model only)

Select the switch position according to your local voltage

(p.43).

E ANTENNA jacks

For connecting FM and AM antennas (p.39).

F AUDIO1~4 jacks

For connecting audio playback devices to input audio

signals (p.37).

G MULTI CH INPUT jacks

For connecting a device that supports multi-channel output

to input audio signals (p.41).

H ZONE OUT jacks

For connecting an external amplifier used in Zone2 or Zone3

to output audio signals (p.81).

I PRE OUT jacks

For connecting subwoofers with built-in amplifier (p.20) or an

external power amplifier (p.27).

J SPEAKERS terminals

For connecting speakers (p.15).

K AC IN

For connecting the supplied power cable (p.43).

RS-232C

FM

75Ω

ANTENNA

AM

(4 RADIO)

AV 1

(1 BD/DVD)

COAXIAL

1

+12V 0.1A MAX.

AC IN

TRIGGER

OUT

DOCK

YP

B PR

YPB PR

OPTICAL

AV O UT

R

L

HDMI OUT

ARC

1

2

HDMI

(1 BD/DVD)

MONITOR OUT/

ZONE OUT

MONITOR OUT/ZONE OUT

IN OUT

2

IN OUT

AV 1

AV 3

AV 2 AV 3 AV 4 AV 5 AV 6 AV 7

1

2

REMOTE

COMPONENT VIDEO

AV 3 AV 4AV 2

AUDIO 4

MULTI CH INPUT

ZONE OUT

AUDIO 3AUDIO 2

(3 CD)

AUDIO 1

(2 TV)

CENTER

SUBWOOFER

ZONE 2 ZONE 3FRONT

SURROUND SUR. BACK

SPEAKERS

CENTER FRONT

SPEAKER IMPEDANCE

ZONE 2/ZONE 3/R.PRESENCE

SURROUND BACK

BI–AMP

ZONE 2/ZONE 3/F.PRESENCE/

R

5

OPTICAL

4

OPTICAL

3

COAXIAL

2

COAXIAL

6

L

SURROUND

R L

R

L

PHONO

NETWORK

A

AV 2

B

C

AV 4

D

PRE OUT

SUBWOOFER

CENTER

FRONT

SURROUND SUR. BACK

(SINGLE) (FRONT)

(REAR)

GND

EXTRA SP1

EXTRA SP2

SINGLE

42 C1 53 6 8 9 0 A B

E F G H I J K

7

D

En 12

Remote control

1 Remote control signal transmitter

Transmits infrared signals.

2 SOURCE

Turns on/off an external device.

SOURCE/RECEIVER

Switches the devices (this unit or external device) to operate

with the remote control (p.125). You can operate this unit

when this key lights up in orange, and an external device

when this key lights up in green.

RECEIVER

Turns on/off (standby) this unit.

3 Display window

Displays remote control information.

4 Input selection keys

Select an input source to play back.

AV1~7 AV1~7 jacks

V-AUX VIDEO AUX jacks (on the front panel)

AUDIO1~4 AUDIO1~4 jacks

PHONO PHONO jacks

MULTI MULTI CH INPUT jacks

USB USB jack (on the front panel)

NET NETWORK jack (press repeatedly to select a

desired network source)

DOCK DOCK jack

TUNER FM/AM radio

[A], [B] Changes the external device to operate with the

remote control without switching the input

source.

5 SCENE

Selects the assigned input source, sound program, HDMI

output and various settings at once. Additionally, you can

turn on this unit when it is in standby mode (p.53).

6 PROGRAM

Selects a sound program (p.55).

7 External device operation keys

Operate playback and menu display etc. for external

devices (p.125).

8 ON SCREEN

Displays the on-screen menu on the TV.

9 Menu operation keys

Cursor keys Select a menu or a parameter.

ENTER Confirms a selected item.

RETURN Returns to the previous screen.

0 MODE

Switches between stereo and monaural for FM radio reception.

Switches the iPod operation modes (p.68).

A PRESET

Selects a preset FM/AM radio station (p.61).

Selects a USB/network content from shortcuts (p.86).

B TV operation keys

Operate TV input, TV volume, etc (p.124).

C VOLUME

Adjusts the volume.

D MUTE

Mutes the audio output.

E OPTION

Displays the option menu (p.90).

F DISPLAY

Displays the status information on the TV (p.89).

G Sound mode keys

Select a sound mode (p.55).

SOURCE

RECEIVER

AV

AUDIO

1 2 3 4

5 6 7

V-AUX

1 2 3 4

MULTI

PHONO

USB NET

TUNER

DOCK [ B ][ A ]

CLASSICAL

LIVE

CLUB

ENTERTAIN

MOVIE

STEREO STRAIGHT

INPUT

PURE

DIRECT

MUTE

TV

SCENE

1 2 3 4

PROGRAM

VOLUME

TV VOL

MUTE

MODE

TOP MENU

RETURN DISPLAY

POP-UP/MENU

TV CH

PRESET

ENTER

ON SCREEN

OPTION

1

3

4

7

8

E

D

0

B

G

F

A

6 C

7

9

5

2

En 13

■ Inside of the remote control cover

H Sound mode keys

Select a sound mode (p.55).

I INFO

Selects the information displayed on the front display (p.89).

J Numeric keys

Enter numerical values such as radio frequencies.

K ZONE

Switches the zones (main, Zone2 or Zone3) to operate with

the remote control (p.84).

L PARTY

Turns on/off the party mode (p.85).

M HDMI OUT

Selects HDMI OUT jacks to be used for video/audio output

(p.52).

N Radio keys

Operate the FM/AM radio when “TUNER” is selected as the

input source.

MEMORY Registers FM/AM radio stations as presets.

FM Switches to FM radio.

AM Switches to AM radio.

TUN./CH Selects the radio frequency.

O SLEEP

Switches this unit to standby mode automatically after a

specified period of time has elapsed (sleep timer). Press

repeatedly to set the time (120 min, 90 min, 60 min, 30 min,

off).

P LEVEL

Adjusts the volume of each speaker (p.106).

Q SETUP

Switches the remote control to the setup mode (p.123)

• To operate external devices with the remote control, register a

remote control code for each device in advance (p.123).

SOURCE

RECEIVER

AV

AUDIO

1 2 3 4

5 6 7

V-AUX

1 2 3 4

MULTI

PHONO

USB NET

TUNER

DOCK [ B ][ A ]

CLASSICAL

LIVE

CLUB

ENTERTAIN

MOVIE

STEREO STRAIGHT

INPUT

PURE

DIRECT

MUTE

TV

SCENE

1 2 3 4

PROGRAM

VOLUME

TV VOL

MUTE

MODE

TOP MENU

RETURN DISPLAY

POP-UP/MENU

TV CH

PRESET

ENTER

ON SCREEN

OPTION

2 3

5

1

4 6

TUN./ CH

ENHANCER

SUR.

DECODE

HDMI OUT

MEMORY

INFO AM

PA RT Y

FM

0

10

LEVELENT

SETUPZONE

87

SLEEP

9

J

N

M

L

O

P

Q

H

K

I

En 14

SETUP

Now all the preparations are complete. Enjoy playing movies, music, radio, etc. with this unit!

General setup procedure

1 Connecting speakers (p.15)

Basic speaker configuration (p.16)

Select the speaker layout and connect the speakers to this unit.

Advanced speaker configuration (p.21)

Apply bi-amp connections, channel expansion (using an external power amplifier) or multi-zone configurations

to enhance the system.

2 Connecting a TV (p.29)

Connect a TV to this unit.

3 Connecting playback devices (p.35)

Connect video devices (BD/DVD players, etc.) and audio devices (CD players, etc.) to this unit.

4 Connecting the FM/AM antennas (p.39)

Connect the supplied FM/AM antennas to this unit.

5 Connecting to the network (p.40)

Connect this unit to the network.

6 Connecting other devices (p.41)

Connect external devices such as recording devices.

7 Connecting the power cable (p.43)

After all the connections are complete, plug in the power cable.

8

Selecting an on-screen menu language (p.44)

Select a desired on-screen menu language (default: English).

9

Optimizing the speaker settings automatically (YPAO) (p.45)

Optimize the speaker settings such as volume balance and acoustic parameters to suit your room (YPAO).

En 15

This unit has 9 built-in amplifiers. You can connect 2 to 11 speakers and up to 2 subwoofers (with built-in amplifier) to create the favorite acoustic space in your room.

You can also apply bi-amp connections, channel expansion (using an external power amplifier) or multi-zone configurations to enhance your system (p.21).

Functions of each speaker

• We recommend using presence speakers to have a full effect of the stereoscopic sound fields. However,

this unit creates Virtual Presence Speaker (VPS) using the front, center and surround speakers to produce

stereoscopic sound fields even when no presence speakers are connected (p.58).

• Use “Ideal speaker layout” (diagram on the right) as reference. You do not need to exactly adjust the

speaker layout to this diagram since the YPAO function of this unit will automatically optimize the speaker

settings (distance, etc.) to suit the speaker layout.

• When using only one surround back speaker, place it straight behind the listening position (middle of “SBL”

and “SBR” in the diagram).

Ideal speaker layout

1 Connecting speakers

Caution

• This unit is configured for 8-ohm speakers at the factory. When connecting 6-ohm speakers, set the speaker impedance of this unit to “6 Ω MIN”. In this case, you can also use 4-ohm speakers as the front speakers. For

details, see “Setting the speaker impedance” (p.18).

Speaker type Abbr. Function

Front (L)

Produce front right/left channel sounds (stereo sounds).

Front (R)

Center Produces center channel sounds (dialogs, vocals, etc).

Surround (L) Produce surround right/left channel sounds. Surround speakers also

produce surround back channel sounds when no surround back

speakers are connected.

Surround (R)

Surround

back (L)

Produce surround back right/left channel sounds. When no surround

back speakers are connected, Surround back channel sounds are

produced from the surround speakers.

Surround

back (R)

Front

presence (L)

Produce CINEMA DSP effect sounds. In combination with CINEMA DSP

3D (p.58), the presence speakers create a natural stereoscopic sound

field in your room.

Front

presence (R)

Rear

presence (L)

Rear

presence (R)

Subwoofer

Produces LFE (low-frequency effect) channel sounds and reinforces

bass parts of other channels.

This channel is counted as “0.1”. You can connect 2 subwoofers (with

built-in amplifier) to this unit and place them on the right/left (or front/

rear) sides of the room.

30 cm or more

1.8 m

0.5 to 1 m

1.8 m

0.5 to 1 m

10°~30°10°~30°

1.8 m1.8 m

1

Speaker connections

2 3 4 5 6 7 8 9

En 16

Basic speaker configuration

■ Placing speakers in your room

Depending on the number of speakers, place the speakers and subwoofer (with built-in amplifier) in your room. This section describes the representative speaker layout examples.

❑ 9.2+2 channel system

(using both surround back and rear presence speakers)

This speaker system brings out the full performance of this unit and allows you to enjoy

a highly-natural stereoscopic sound field with any contents.

• The surround back speakers and rear presence speakers do not produce sounds simultaneously. This unit

automatically switches the speakers to be used depending on a selected CINEMA DSP (p.56).

❑ 9.2 channel system

(using rear presence speakers)

This speaker system uses the front and rear presence speakers to produce a highly-

natural stereoscopic sound field, and is suited for enjoying 5.1-channel contents.

❑ 9.2 channel system (using surround back speakers)

This speaker system uses the front presence speakers to produce a natural

stereoscopic sound field, and also allows you to enjoy extended surround sounds using

the surround back speakers.

1

Speaker connections

2 3 4 5 6 7 8 9

En 17

❑ 7.1 channel system (using front presence speakers)

This speaker system uses the front presence speakers to produce a natural

stereoscopic sound field, and is suited for enjoying 5.1-channel contents.

❑ 7.1 channel system (using surround back speakers)

This speaker system creates Virtual Presence Speaker (VPS) using the front, center and

surround speakers to produce a stereoscopic sound field, and also allows you to enjoy

extended surround sounds using the surround back speakers.

❑ 5.1 channel system

This speaker system creates Virtual Presence Speaker (VPS) using the front, center and

surround speakers to produce a stereoscopic sound field, and is suited for enjoying

5.1-channel contents.

❑ 2.1 channel system

Even when no surround speakers are connected, this unit creates the virtual surround

speakers using the front speakers to allow you to enjoy multi-channel surround sound

(Virtual CINEMA DSP).

• Add the center speaker to configure a 3.1-channel system.

1

Speaker connections

2 3 4 5 6 7 8 9

En 18

■ Setting the speaker impedance

This unit is configured for 8-ohm speakers at the factory. When connecting 6-ohm

speakers, set the speaker impedance to “6 Ω MIN”. In this case, you can also use

4-ohm speakers as the front speakers.

1

Before connecting speakers, connect the supplied power cable to

this unit and then to an AC wall outlet.

2

While holding down STRAIGHT on the front panel, press MAIN ZONE .

3

Check that “SPEAKER IMP.” is displayed on the front display.

4

Press STRAIGHT to select “6 Ω MIN”.

5

Press MAIN ZONE to set this unit to standby mode and remove the

power cable from the AC wall outlet.

Now you are ready to connect the speakers.

MAIN ZONE

STRAIGHT

OUT

1

IN

OUT

2

VOLUME

MUTE

DRCADAPTIVE

3

ZONE

2

SBLPL SBRSB PR

SW1

SL

SW2SW

SR

PL

CL R

PR

STEREO

ENHANCER

SLEEP

HD

TUNED

PRE

AMP

PAR TY

ZONE

3

ZONE

4

HD

TAG

DOCK

8MIN

SPEAKERIMP.

SPIMP.-

1

Speaker connections

2 3 4 5 6 7 8 9

En 19

■ Connecting speakers

Connect the speakers placed in your room to this unit.

Speakers to be connected

If you have 9 speakers, use two of them as surround back speakers (*1) or rear

presence speakers (*2). If you have 7 speakers, use two of them as surround back

speakers (*3) or front presence speakers (*4).

• You can also connect up to 2 subwoofers (with built-in amplifier) to this unit. When using 2 subwoofers,

configure the “SWFR Layout” setting (p.106) in the “Setup” menu after connecting the power cable to an AC

wall outlet.

• To use an external power amplifier (Hi-Fi amplifier, etc.) to enhance speaker output, see “Connecting an

external power amplifier” (p.27).

Cables necessary for connection (commercially available)

Speaker cables (x the number of speakers)

Audio pin cable (2 for connecting 2 subwoofers)

Connection diagram

Refer to the following diagram and connect the speakers to this unit.

• When using only one surround back speaker, connect it to the SINGLE jack (L side).

Caution

• Remove the power cable of this unit from an AC wall outlet and turn off the subwoofer before

connecting the speakers.

• Be careful that the core of the speaker cable does not touch anything or come into contact with the

metal areas of this unit. This may damage this unit or the speakers. If the speaker cables short circuit,

“CHECK SP WIRES” will appear on the front display when this unit is turned on.

Room Speaker type Abbr.

Speaker system

(the number of channels)

Power Amp

Assign

(p.104)

9+2 9 7 5 2

Main zone

Front (L) ●●●●●

Basic (default)

Front (R) ●●●●●

Center ●●●●

Surround (L) ●●●●

Surround (R) ●●●●

Surround back (L) ● {*1 {*3

Surround back (R) ● {*1 {*3

Front presence (L) ●●{*4

Front presence (R) ●●{*4

Rear presence (L) ● {*2

Rear presence (R) ● {*2

–

+

–

+

1

2

AUDIO 4

MULTI CH INPUT

ZONE OUT

AUDIO 3

CENTER

SUBWOOFER

ZONE 2 ZONE 3FRONT

SURROUND SUR. BACK

SPEAKERS

CENTER FRONT

SPEAKER IMPEDANCE

ZONE 2/ZONE 3/R.PRESENCE

SURROUND BACK

BI–AMP

ZONE 2/ZONE 3/F.PRESENCE/

R L

SURROUND

R L

R

L

PRE OUT

SUBWOOFER

CENTER

FRONT

SURROUND SUR. BACK

(SINGLE) (FRONT)

(REAR)

EXTRA SP1EXTRA SP2

SINGLE

This unit (rear)

1

Speaker connections

2 3 4 5 6 7 8 9

En 20

❑ Connecting speaker cables

Speaker cables have two wires. One is for connecting the negative (-) terminal of the unit

and the speaker, and the other is for the positive (+) terminal. If the wires are colored to

prevent confusion, connect the black wire to the negative and the other wire to the positive.

a Remove approximately 10 mm of insulation from the ends of the speaker cable, and twist

the bare wires of the cable together firmly.

b Loosen the speaker terminal.

c Insert the bare wires of the cable into the gap on the side (upper right or bottom left) of the

terminal.

d Tighten the terminal.

Using a banana plug

(Canada, China, Australia and General models only)

a Tighten the speaker terminal.

b Insert a banana plug into the end of the terminal.

❑ Connecting the subwoofer

Use an audio pin cable to connect the subwoofer.

FRONT

-

+

aa

c

b

d

+ (red)

– (black)

FRONT

+

aa

b

Banana plug

(

SINGLE

)

PRE OUT

CENTER

SUR. BACKSURRUND

1

2

FRONT

(

REAR

)

SUBWOOFER

(

FRONT

)

Audio pin cable

1

Speaker connections

2 3 4 5 6 7 8 9

La page charge ...

Yamaha RX-A2010 Le manuel du propriétaire

Yamaha RX-A2010 Le manuel du propriétaire

dans d''autres langues

Documents connexes

Autres documents