R03.002_03/01/2011
TECHNICAL FILE
Novocanto® SliMM
Novocanto® SliMM belongs to the SliMM range of products of
Emac®, specially designed to its placement with low thickness
ceramics, small tiles or thin mosaics. This prole, made of aluminium,
has been designed for decoration and protection of edges although
it also can be installed as decorative nish at half height. This edge
protector is available in anodized and lacquered latest trend nishes,
offering multiple decorative possibilities.
General Features
Material:
Anodized aluminium
Lacquered aluminium
Length: 8ft2in / 2,5 l.m.
Dimensions: h: 3/16” / 4,5 mm.
Packaging: 50 u/box
Finishes:
Applications
Novocanto® SliMM is a prole orientated to protect and decor edges in tilings. In adition to this, can be
installed as a decorative nish at half height.
Novocanto® SliMM has a complementary piece made of zamak for the placement of the proles in
right angle to a better nish.
Angle piece Novocanto® SliMM
Complementary pieces
Technical Features
Page 1 of 3
Alloy: 6063 (AA and ASTM)
L-3441 (UNE 38-301-89)
Fire resistance: M0 (UNE 23-727-90)
Abrasion resistance: Very good
Lightfastness: Excellent
Appearance and color: EN 12373-1
Reg. 1668435-14
R03.002_03/01/2011
TECHNICAL FILE
Novocanto® SliMM
Materials
Aluminium
Novocanto® SliMM is a prole made by extrusion of aluminium. The bright gold, matte gold, bright silver
and matte silver nishes have been anodized, improving mainly through this process their corrosion
resistance, mechanical resistance and appearance. The anodized applied has the quality seal Qualanod,
which guarantees the quality of the process and the resulting proles. This seal regulates several tests:
appearance and color, thickness measurements, sealing and impregnation control, abrasion resistance,
lightfastness, acetic saline chamber and nitric acid immersion.
The white nish has been lacquered, obtaining so a high quality and homogeneus surface. The lacquering
has the quality seal Qualicoat, which guarantees the quality of the process and the nal products.
The aluminium is a material with excellent chemical, physical and mechanical properties. It is lightweight,
tough, ductile, malleable and highly durable.
1. Spread a big amount of gripping material on the surface where you are going to place the prole.
2. Place the prole aligned to the corner and press to make the gripping material pass through the
mechanized holes of the xing wing.
3. Place tiles on the xing wing and press to an optimal adhesion.
4. Continue the tiling of the wall.
5. Finally, clean the remaining material, remove the protective lm if necessary and let dry.
Placement
1
2
3 4
5
The cleaning must be done periodically with a soft cloth. If you use a neutral liquid cleaner, you must
rinse the prole with cold water and dry to remove excess moisture. If dirtiness persists, clean the
prole with a solution with clean water and detergent or neutral soap 5%, brushing with a cloth that
has no particles that could scracht the nish. Ensure the lacquered surface is totally cold (maximum
20ºC) before the cleaning.
Steel wool, abrasive cleaners, souring products as well as strong acids (hydrochloric and
perchloric),strong bases (caustic soda or ammonia) or carbonated solutions are not recommended.
Citric acid is neither recommended because disolves the protective layer of the surface of aluminium.
Waxes, petrolatum, lanolin or similar substances are not appropriate. Solvents containing haloalkanes
(hydrouoroether and chlorinated solvents) and curing accelerators containing chlorides should not be
used (use special accelerators free of chlorides).
Cleaning and maintenance
Zamak
The complementary piece of Novocanto® SliMM is made of Zamak. Zamak is a non ferrous alloy of Zinc
with aluminium, magnesium and copper (UNE EN 1774). It is tough, has high hardness, high mechanical
strength and excellent plastic deformability.
The surface nish applied, protects the prole and is similar to Novocanto® SliMM’s nishes.
*You can nd out more information by consulting the Technical les of materials in www.emac.es
To see the video, capture this
image with your mobile phone
(QR code reader software is
necessary) or click on it.
Page 2 of 3
TECHNICAL FILE
R03.002_03/01/2011
You can nd out more information about the technical features of Emac®’s products by downloading
its Technical File in www.emac.es.
If you have any query, please contact our Technical Department in tecnico@emac.es.
Technical information
Emac Complementos S.L. (Spain) info@emac.es // Emac America L.L.C. (FL,USA) [email protected] // Emac Italia S.R.L. (Italy) [email protected]
www.emac.es
The data provided are for information only and have been obtained by our supplier or Emac®.
Does not constitute legal guarantee in terms of properties and / or functionality of the application of material
Novocanto® SliMM
Indoors Wall tiling Recyclable
Page 3 of 3
-
1
-
2
-
3
Emac NAP1AL31601 Manuel utilisateur
- Taper
- Manuel utilisateur
- Ce manuel convient également à
dans d''autres langues
- English: Emac NAP1AL31601 User manual
Documents connexes
-
Emac NLS01316 Manuel utilisateur
-
Emac NJMF3810 Manuel utilisateur
-
-
-
-
-
-
-
-