Bose solo-10-series-ii Le manuel du propriétaire

Catégorie
Lecteurs Blu-Ray
Taper
Le manuel du propriétaire
Bose
®
Solo 15/10 series II
TV sound system
Owner’s Guide • Brugervejledning • Bedienungsanleitung • Gebruikershandleiding
Guía del usuario • Käyttöohje • Notice d’utilisation • Manuale di istruzioni • Kezelési útmutató
Brukerveiledning • Podręcznik użytkownika • Manual do proprietário • Bruksanvisning
2 - English
Regulatory InformationImportant Safety Instructions
Please read this owner’s guide carefully and save it for
future reference.
The lightning flash with arrowhead symbol within an equilateral triangle
alerts the user to the presence of uninsulated, dangerous voltage within
the system enclosure that may be of sufficient magnitude to constitute a
risk of electrical shock.
The exclamation point within an equilateral triangle, as marked on the
system, is intended to alert the user to the presence of important
operating and maintenance instructions in this owner’s guide.
WARNINGS:
To reduce the risk of fire or electric shock, do not expose this product to
rain or moisture.
Do not expose this apparatus to dripping or splashing, and do not place
objects filled with liquids, such as vases, on or near the apparatus. As
with any electronic products, use care not to spill liquids into any part of
the product. Exposure to liquids may create a failure and/or fire hazard.
Do not place naked flame sources, such as lighted candles, on or near
the product.
Do not allow children to push, pull, or climb on an A/V monitor. This may
cause it to tip over, possibly resulting in personal injury or death. For
added safety and stability, be sure to secure the monitor using a suitable
anti-tip device.
Never place the equipment in an unstable location. The equipment may
fall, causing serious personal injury or death. Many injuries, particularly
to children, can be avoided by taking simple precautions such as:
Using cabinets or stands recommended by the manufacturer of
the equipment.
– Only using furniture that can safely support the equipment.
Ensuring the equipment is not overhanging the edge of the supporting
furniture.
Not placing the equipment on tall furniture (for example, cupboards or
bookcases) without anchoring both the furniture and the equipment to
a suitable support.
Not standing the equipment on cloth or other materials placed between
the equipment and supporting furniture.
Educating children about the dangers of climbing on furniture to reach
the equipment or its controls.
If you doubt your ability to safely mount this product, contact a
professional installer for help.
WARNINGS:
Solo 10 series II system remote: Do not ingest battery, chemical burn
hazard.
The remote control supplied with this product contains a coin/button cell
battery. If the coin/button cell battery is swallowed it can cause severe
internal burns in just two hours and can lead to death. Keep new and
used batteries away from children. If the battery compartment does not
close securely, stop using the product and keep it away from children. If
you think the battery may have been swallowed or placed inside any part
of the body, seek immediate medical attention. The coin/button cell bat-
tery may explode or cause a fire or chemical burn if incorrectly
replaced or mishandled. Do not recharge, disassemble, heat above
212°F (100°C) or incinerate. Replace only with an agency approved
(ex. UL) CR2032 or DL2032 3-volt lithium battery. Dispose of used
batteries promptly.
Solo 15 series II system remote: Do not dismantle, open or shred bat-
tery pack or cells. Do not expose batteries or a battery pack to heat or
fire. Avoid storage in direct sunlight. Do not short-circuit battery. Do not
store batteries carelessly in a box or drawer where they may short-circuit
each other or be short-circuited by other metal objects. Do not remove a
battery from its original packaging until required for use. Do not subject
batteries to mechanical shock. In the event of a battery leaking, do not
allow the liquid to come in contact with the skin or eyes. If contact has
been made, wash the affected area with copious amounts of water and
seek medical advice. Observe the plus (+) and minus (-) marks on the
battery and equipment and ensure correct use. Do not use any battery
pack or cell which is not designed for use with the product. Keep bat-
teries out of the reach of children. Seek medical advice immediately if
a battery has been swallowed. Always purchase the correct battery for
the equipment. Keep batteries clean and dry. Wipe the battery terminals
with a clean dry cloth if they become dirty. Use the battery only in the
application for which it was intended. When possible, remove the battery
from the equipment when not in use. Replace only with AA (IEC LR06)
alkaline batteries.
CAUTION: Do not make unauthorized alterations to the product; doing so
may compromise safety, regulatory compliance, system
performance, and may void the warranty.
WARNING:
This product contains magnetic material. Contact your
physician if you have questions on whether this might affect
the operation of your implantable medical device.
WARNING: Contains small parts which may be a choking hazard. Not
suitable for children under age 3.
NOTES:
• The product label is located on the bottom of the product.
Where the mains plug or appliance coupler is used as the disconnect device,
such disconnect device shall remain readily operable.
This product must be used indoors. It is neither designed nor tested for use
outdoors, in recreational vehicles, or on boats.
Bose Corporation hereby declares that this product is in compliance with
the essential requirements and other relevant provisions of Directive
1999/5/EC and all other applicable EU directive requirements. The
complete declaration of conformity can be found at:
www.Bose.com/compliance
Please dispose of used batteries properly, following local regulations.
Do not incinerate.
Important Safety Instructions
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with a dry cloth.
7. Do not block any ventilation openings. Install in accordance with the
manufacturer’s instructions.
8. Do not install near any heat sources, such as radiators, heat registers, stoves,
or other apparatus (including amplifiers) that produce heat.
9. Protect the power supply or cord from being walked on or pinched, particularly
at plugs, convenience receptacles, and the point where they exit from the
apparatus.
10. Only use attachments/accessories specified by the manufacturer.
11. Unplug this apparatus during lightning storms or when unused for long periods
of time.
12. Refer all servicing to qualified service personnel. Servicing is required when
the apparatus has been damaged in any way: such as power supply or cord is
damaged; liquid has been spilled or objects have fallen into the apparatus; the
apparatus has been exposed to rain or moisture, does not operate normally, or
has been dropped.
This symbol means the product must not be discarded as household
waste, and should be delivered to an appropriate collection facility for
recycling. Proper disposal and recycling helps protect natural resources,
human health and the environment. For more information on disposal
and recycling of this product, contact your local municipality, disposal
service, or the shop where you bought this product.
English - 3
Regulatory Information
Note: This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by Bose Corporation could
void the user’s authority to operate this equipment.
This device complies with part 15 of the FCC Rules and Industry Canada
license-exempt RSS standard(s). Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this
device must accept any interference received, including interference that may
cause undesired operation.
This Class B digital apparatus complies with Canadian ICES-003.
CAN ICES-3 (B) / NMB-3 (B)
This device complies with FCC and Industry Canada RF radiation exposure limits
set forth for general population. It must not be co-located or be operating in
conjunction with any other antennas or transmitters.
This equipment complies with FCC/IC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator and your body.
Management Regulation for Low-power Radio-frequency Devices
Article XII
According to “Management Regulation for Low-power Radio-frequency Devices”
without permission granted by the NCC, any company, enterprise, or user is
not allowed to change frequency, enhance transmitting power or alter original
characteristic as well as performance to an approved low power radio-frequency
devices.
Article XIV
The low power radio-frequency devices shall not influence aircraft security and
interfere legal communications; If found, the user shall cease operating imme-
diately until no interference is achieved. The said legal communications means
radio communications operated in compliance with the Telecommunications Act.
The low power radio-frequency devices must be susceptible with the interfer-
ence from legal communications or ISM radio wave radiated devices.
Names and Contents of Toxic or Hazardous Substances or Elements
Toxic or Hazardous Substances and Elements
Part Name
Lead
(Pb)
Mercury
(Hg)
Cad-
mium
(Cd)
Hexava-
lent
(CR(VI))
Polybromi-
nated Biphenyl
(PBB)
Polybro-
minated
diphenylether
(PBDE)
PCBs
X
O O O O O
Metal parts
X
O O O O O
Plastic parts O O O O O O
Speakers
X
O O O O O
Cables
X
O O O O O
This table is prepared in accordance with the provisions of SJ/T 11364.
O: Indicates that said hazardous substance contained in all of the homogeneous materials for this part
is below the limit requirement of GB/T 26572.
X: Indicates that said hazardous substance contained in at least one of the homogeneous materials
used for this part is above the limit requirement of GB/T 26572.
Please complete and retain for your records:
Serial numbers can be found on the bottom of the soundbar and on the
packaging for the remote control.
Remote serial number: _________________________________________________
System serial number: _________________________________________________
Purchase date: ________________________________________________________
We suggest you keep your receipt with this owner’s guide.
Date of manufacture: The first bolded digit in the serial number indicates the
year of manufacture; “5” is 2005 or 2015.
China Importer: Bose Electronics (Shanghai) Company Limited, Part C, Plan 9,
No. 353 North Riying Road, China (Shanghai) Pilot Free Trade Zone
EU Importer: Bose Products B.V., Gorslaan 60, 1441 RG Purmerend,
Taiwan Importer: Bose Taiwan Branch, Room 905, 9F, Worldwide House, 131
Min Sheng East Rd, Section 3, Taipei, Taiwan, 105
The Bluetooth
®
word mark and logos are registered trademarks owned by
Bluetooth SIG, Inc. and any use of such marks by Bose Corporation is under
license.
Blu-ray Disc
and Blu-ray
are trademarks of the Blu-ray Disc Association.
Manufactured under license from Dolby Laboratories. Dolby and
the double-D symbol are trademarks of Dolby Laboratories.
The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI
Logo are trademarks or registered trademarks of HDMI Licensing LLC in the
United States and other countries.
©2017 Bose Corporation. No part of this work may be reproduced, modified,
distributed, or otherwise used without prior written permission.
The N
etherlands
4 - English
Contents Introduction
Introduction
About your Solo 15/10 series II TV sound system .............................. 5
System features............................................................................... 5
Unpacking ................................................................................................. 5
Setting up the System
Placing the system .................................................................................. 6
Cable options ............................................................................................ 6
Connecting your TV ................................................................................. 6
Connecting the system .......................................................................... 7
Option 1: Optical cable (preferred) ................................................ 7
Option 2: Coaxial cable ................................................................... 7
Option 3: Analog cable ................................................................... 7
Connecting to power ............................................................................... 7
Placing your TV on the system.............................................................. 8
Sample system placement ............................................................ 8
Turning off your TV speakers ................................................................. 8
Powering on the system......................................................................... 8
Confirming your TV speakers are off ............................................ 8
Using the System
Using the Solo 15 series II system universal remote ........................ 9
Programming the universal remote ........................................... 10
Customizing the power button ..................................................... 10
Switching between sources .......................................................... 10
Function buttons ............................................................................. 10
Using the Solo 10 series II system remote control ............................ 11
Switching between your TV and Bluetooth
®
device ................. 11
Optional Solo 15 series II system universal remote control ............ 12
Programming a non-Bose remote control .......................................... 12
Adjusting the volume ............................................................................. 12
Adjusting the bass level ......................................................................... 12
Resetting the bass level ................................................................. 12
Dialogue mode ......................................................................................... 12
Auto-wake ................................................................................................. 12
Bluetooth
®
Pairing a Bluetooth
®
device ................................................................... 13
Connecting to a paired Bluetooth
®
device .......................................... 13
Switching between connected devices ............................................... 13
Clearing the system’s Bluetooth
®
pairing list ..................................... 13
Getting System Information
System indicators.................................................................................... 14
Status indicator ............................................................................... 14
Bluetooth
®
indicator ....................................................................... 14
Alternate Setup
No sound from a source(s) connected to your TV ..................... 15
No optical, coaxial or analog connector on your TV .................. 15
Care and Maintenance
Troubleshooting ...................................................................................... 18
Replacing the remote batteries ............................................................ 19
Solo 15 series II system remote control ....................................... 19
Solo 10 series II system remote control ...................................... 19
Cleaning ..................................................................................................... 19
Customer service ..................................................................................... 19
Limited warranty ..................................................................................... 19
Technical Information ............................................................................. 19
English - 5
Introduction
About your Solo 15/10 series II
TV sound system
The Solo 15/10 series II system comes in two configurations:
The Solo 15 series II system has a metal grille and a
programmable universal remote control.
The Solo 10 series II system has a cloth grille and a
remote control.
System features
Connects with just one audio cable for easy setup.
Fits under most TVs 46" to 50" or can be placed on a shelf
directly below TV.
Programmable universal remote powers on/off your TV,
cable/satellite box and system with the press of a single
button (Solo 15 series II system).
Stream music from Bluetooth
®
devices.
Stores up to eight Bluetooth devices in its pairing list.
Connects up to two Bluetooth devices for easy
switching between devices.
Delivers superb acoustic performance with an
unobstrusive design.
Unpacking
Carefully unpack the carton and confirm that the following parts
are included:
Solo 15/10 series II TV sound system Power cord
Optical cable Coaxial cable
(Europe only)
3.5 mm audio cable
Solo 15 series II system
universal remote
(batteries provided)
OR Solo 10 series II
system remote
(battery installed)
May ship with multiple power cords. The appropriate power
cord for your region is supplied.
Note: If part of the system is damaged, do not use it. Contact your
authorized Bose
®
dealer or Bose customer service. Refer to
the contact sheet in the carton.
6 - English
Setting up the SystemSetting up the System
Placing the system
1. Move your TV so you can see the Audio Out panel.
2. Place the Solo 15/10 series II system where you had your TV.
Placement guidelines:
If placing the sound system in a cabinet or on a shelf, position the
front of the system as close as possible to the front edge of the
shelf for optimum audio performance.
CAUTIONS:
If placing the sound system backed up to a wall, make sure there
is a space of at least 1" (2.5 cm) between the wall and the rear of
the system.
With any placement of this product, make sure the ventilation
openings on the rear panel are not blocked.
Cable options
Connect your TV to the system using one of the three cable
options. The optical cable is the preferred method for connection.
Tip: If your TV does not have an optical, coaxial or analog
connector, see page 15.
1. On the back of your TV, locate the Audio OUT (digital)
connector panel.
Note: You must connect the audio cable through your Audio
OUT connector panel.
Option 1:
Optical (digital)
Preferred method
for connection.
Option 2:
Coaxial (digital)
Use if no optical
output is available.
Option 3:
Analog (stereo)
Use this connection if
no optical or coaxial
outputs are available.
Your TV's connector panel may not appear as shown.
Look for the shape (optical) or color of the connector.
2. Choose an audio cable.
Connecting your TV
Insert one end of the audio cable into the correct Audio OUT
(digital) connector on your TV.
CAUTION: If using an optical cable, remove the protective caps
from both ends. Inserting the plug in the wrong
orientation can damage the plug and/or the connector.
English - 7
Setting up the System
Connecting the system
After connecting the audio cable to your TV, connect the other end
to your system. Use only one audio cable.
Option 1: Optical cable (preferred)
CAUTION: Ensure you have removed the protective cap from
both ends of the optical cable. Inserting the plug in
the wrong orientation can damage the plug and/or
the connector.
1. Hold the optical cable’s plug with the Bose logo facing up.
2. Align the plug with the Optical connector on the system and
insert the plug carefully.
Hinged door
Note: The connector has a hinged door that swings inward
when inserting the plug.
3. Firmly push the plug into the connector until you hear or feel
a click.
Option 2: Coaxial cable
Insert the other end of the coaxial cable into the Coaxial connector
on the system.
Option 3: Analog cable
1. Insert the red plug into the R connector on the system.
2. Insert the white plug into the L connector on the system.
Connecting to power
1. Plug one end of the power cord into the Power connector.
2. Plug the other end into a live AC power (mains) outlet.
The system emits a tone.
1
2
Cable options
Connect your TV to the system using one of the three cable
options. The optical cable is the preferred method for connection.
Tip: If your TV does not have an optical, coaxial or analog
connector, see page 15.
1. On the back of your TV, locate the Audio OUT (digital)
connector panel.
Note: You must connect the audio cable through your Audio
OUT connector panel.
Option 1:
Optical (digital)
Preferred method
for connection.
Option 2:
Coaxial (digital)
Use if no optical
output is available.
Option 3:
Analog (stereo)
Use this connection if
no optical or coaxial
outputs are available.
Your TV's connector panel may not appear as shown.
Look for the shape (optical) or color of the connector.
2. Choose an audio cable.
Connecting your TV
Insert one end of the audio cable into the correct Audio OUT
(digital) connector on your TV.
CAUTION: If using an optical cable, remove the protective caps
from both ends. Inserting the plug in the wrong
orientation can damage the plug and/or the connector.
8 - English
Using the SystemSetting up the System
Placing your TV on the system
Lift your TV and place it on top of the system. Follow these
guidelines:
The Bose Solo 15/10 series II system is designed to fit under TVs
that weigh no more than 75 lbs (34 kg) and have bases no wider
than 24" (61 cm), and no deeper than 12.25" (31 cm).
The base of your TV should be centered on the top of the system
and must not hang over any of its edges.
If the TV base is too large to fit on top of the system, place the
sound system in another location such as on an open shelf under
the TV, but keep it close to your TV so the audio cable will reach.
You can also mount your TV on the wall above the system.
CAUTIONS:
DO NOT place a CRT type TV on this system. It is not designed
for use with this type of TV.
Allowing the base of your TV to hang over any edge of this
speaker system increases the risk of the TV tipping, which may
result in injury.
If your TV comes with an anti-tip device, install it according to the
manufacturer’s instructions and adjust the tether as instructed
after placing the TV on top of the system. Installing an anti-tip
device is recommended when using a TV with this product. If
your TV did not come with an anti-tip device, you can get one
from most retail TV suppliers.
To avoid wireless interference:
Keep other wireless equipment away from the system.
Place the system outside of and away from metal cabinets, other
audio/video components and direct heat sources.
Sample system placement
Turning off your TV speakers
To avoid hearing distorted sound, turn off your TV speakers.
Refer to your TV’s owner’s guide for more information.
Powering on the system
1. Power on your TV.
2. If you are using a cable/satellite box or other secondary
source, power on the source.
3. Press the Power button (
) on the remote control.
The status indicator glows green.
Status indicator
4. Check if sound is coming from the system.
Note: If you do not hear sound coming from the system, see
“Troubleshooting” on page 18.
Confirming your TV speakers are off
1. Press the Mute button ( ) on the remote.
2. Check that no sound is coming from your TV.
Note: If you hear sound coming from your TV, see
“Troubleshooting” on page 18.
English - 9
Using the System
Using the Solo 15 series II system universal remote
Use the remote to control sources connected to the system, adjust the system volume, change channels, use playback functions and enable
cable/satellite box functions.
Navigation pad
Source selection
Lists recorded DVR
programs
Closed captioning
Selects a source
connected to
your TV
Function buttons
(see page 10)
Bass controls
(see page 12)
Playback controls
Powers on/off the soundbar and
controls auto-wake (see page 12)
Powers on/off a selected source
Previous channel, chapter or track
Teletext mode
Volume controls
(see page 12)
Dialogue mode
(see page 12)
controls the Bluetooth
®
feature
(see page 13)
Displays the Internet TV
home page
10 - English
Using the SystemUsing the System
Programming the universal remote
You can program the universal remote to control your source, such
as a TV, DVD/Blu-ray Disc
player, cable/satellite box, game system
or DVR, by entering the code for your source’s brand. There may
be several codes for your source. You may need to perform this
procedure multiple times to locate the correct code.
Locate your source’s code
1. Power on your source.
2. Locate the code for your source’s brand in the Universal
Remote Device Codes book (provided).
Enter your source’s code
1. On the remote control, press and hold the appropriate source
button until all six source buttons glow, then release.
For example, to program your TV, press and hold
until
all six source buttons glow, then release.
The appropriate source button continues to glow.
2. On the number keypad, enter the code for your source’s brand
and press + on the volume button.
Test your source’s code
1. Test your source for basic functions. Follow the instructions for
your source:
TV: press the channel buttons. Press
. The settings
menu appears. Press
and to navigate.
Cable/satellite box: press
. The programming
guide appears. Press
and to navigate.
DVD or Blu-ray Disc
player: press . The settings
menu appears. Press
and to navigate.
Game system: press
and to navigate through
your menu.
2. Based on your source’s response to basic functions:
Remote responds accurately: press
to exit
programming and save your settings.
Remote does not respond or does not respond
accurately:
- If your source button glows: press + on the volume
button to move to the next code. Repeat steps 1-2 in
“Test your source’s code”. You may need to repeat this
procedure 30 or more times. If all six buttons blink three
times, you have cycled through all codes for your source.
- If your source button is off: your remote exited program-
ming mode. Repeat steps 1-2 in “Enter your source’s
code” and steps 1-2 in “Test your source’s code”.
Tip: After you exit programming mode, press the appropriate
source button to use your source.
Note: Your source may not be compatible with universal
remote controls. Refer to your source’s owner’s guide
for more information.
Customizing the power button
You can customize (power button) on your remote to power
on/off your system, TV and cable/satellite box simultaneously.
1. Program your remote to control your TV and cable/satellite box
(see “Programming the universal remote”).
2. Press
and simultaneously and hold for ten
seconds.
Both buttons flash three times.
Resyncing your cable/satellite box and TV
After customizing the power button, your cable/satellite box and TV
may become out of sync and not power on/off simultaneously. Use
the following steps to resync the system.
1. Press the source button for the source that is out of sync.
2. Press
to power on/off the source.
3. Press
.
Your sources power on/off simultaneously.
Switching between sources
You can switch from one source to another by pressing the
appropriate source button on the remote. For information on
connecting to a paired Bluetooth
®
device, see page 13.
Note: Before you begin, ensure you have correctly programmed
your sources.
1. Press the button for the source you want to control.
The source button glows.
2. Press
.
The source powers on.
3. Press
and select the correct input on your TV.
Function buttons
The red, green, yellow and blue buttons on the remote control
correspond with the color-coded function buttons on your cable/
satellite box or teletext functions.
Cable/satellite box functions: refer to your cable/satellite box’s
owner’s guide.
Teletext functions: correspond with color-coded page numbers,
headings or shortcuts on a teletext display.
English - 11
Using the System
Using the Solo 10 series II system remote control
Use the remote to power on/off the system, adjust the volume and bass, use dialogue mode and control the Bluetooth
®
feature.
Powers on/off the
soundbar and
controls auto-wake
(see page 12)
TV
BASS
Volume controls
(see page 12)
Switches audio from a Bluetooth device to
your TV
controls the Bluetooth
®
feature
(see page 13)
Bass controls
(see page 12)
Dialogue mode
(see page 12)
Switching between your TV and Bluetooth
®
device
You can switch between your TV and Bluetooth device(s) by pressing the appropriate source button on your remote control.
To switch to your TV, press the TV button (
).
To switch to your Bluetooth device(s), press the Bluetooth button (
).
For more information on streaming music from Bluetooth devices, see page 13.
12 - English
Bluetooth
®
Using the System
Optional Solo 15 series II system
universal remote control
Bose offers the Solo 15 series II system universal remote control for
separate purchase. Contact Bose Corporation or your local dealer
for more information. Refer to the contact sheet in the carton.
Programming a non-Bose
remote control
You can program a non-Bose remote control, such as your
cable/satellite box remote, to control the system. Refer to your
non-Bose remote control’s owner’s guide or cable/satellite website
for instructions.
Once programmed, the non-Bose remote performs basic functions
such as power on/off and volume.
Adjusting the volume
On the remote control:
Press + to increase the volume.
Press to decrease the volume.
Press
to mute or unmute the audio.
Note: If you hear sound coming from your TV, see “Troubleshoot-
ing” on page 18.
Adjusting the bass level
1. Press the Bass button ( ).
The status indicator blinks white three times.
2. On the remote control:
Press
to increase the bass.
Press
to decrease the bass.
3. Press the Bass button (
).
The status indicator blinks white three times and the system
saves your settings.
Note: For optimal sound quality for dialogue-only programs, such
as news and talk shows, see “Dialogue mode”.
Resetting the bass level
On the remote control, press and hold for five seconds to
reset the bass level to original factory settings.
Dialogue mode
Dialogue mode provides optimal sound quality for dialogue-only
programs, such as news and talk shows, by decreasing the
system’s bass settings.
On the remote control, press the dialogue button (
) to toggle
between dialogue mode and your default audio settings.
The status indicator glows amber when dialogue mode is enabled.
Auto-wake
You can set the system to power on whenever a sound signal
is received.
Note: The system powers off after 60 minutes of inactivity.
On the remote control, press and hold
for five seconds to toggle
between auto-wake and default power settings.
The status indicator glows dim amber when the system is off and
auto-wake is enabled.
English - 13
Bluetooth
®
Pairing a Bluetooth
®
device
Bluetooth
®
wireless technology enables you to stream music from
Bluetooth smartphones, tablets, computers or other audio devices
to the system.
Before you can stream music from a Bluetooth device, you must
pair your device with the system.
1. On the remote control, press and hold
until the Bluetooth
indicator blinks blue.
Make sure the Bluetooth indicator blinks blue before you pair
your device.
2. On your Bluetooth device, turn on the Bluetooth feature.
Tip: The Bluetooth feature is usually found in Settings. A gear
icon (
) often represents Settings on the Home screen.
3. Select Bose Solo system from your device list.
Once paired, Bose Solo system appears connected in
the device list. The system emits a tone and the Bluetooth
indicator glows white.
4. On your Bluetooth device, play music to stream to
the system.
If you cannot pair your device
You may need to clear the system’s Bluetooth pairing list (see
“Clearing the system’s Bluetooth pairing list”). After you clear the
list, try pairing again.
See “Troubleshooting” on page 18 for more information.
Connecting to a paired Bluetooth
®
device
You can stream audio from a Bluetooth
®
device to the system.
Note: If there are multiple devices stored in the system’s pairing
list, it may take a minute or two for the paired device to
connect. The system’s Bluetooth indicator shows connection
status (see page 14).
1. On the remote control, press
.
The system connects to the last two devices that streamed to
your system.
2. On the device, play music.
If you cannot stream audio from a paired device
The system may have lost connection to the device. Check the
system’s Bluetooth indicator. If the paired device is out of range of
the system, move the device within range.
Switching between connected
devices
The system supports multi-point connectivity, which allows you to
seamlessly switch playing music between connected devices.
The last two devices that streamed to the system remain connect-
ed. During playback, you can pause audio on the streaming device,
and then play music from another connected device.
1. Pause music from the streaming device.
2. On another connected device, play music.
3. Repeat steps 1 and 2 to switch between connected devices.
Clearing the systems Bluetooth
®
pairing list
When you pair a Bluetooth
®
device to the system, the connection is
stored in the system’s pairing list. You may need to clear the pairing
list if you cannot connect to a device. Once you clear the list, you
need to pair the device again.
1. Press and hold
for 10 seconds, until the Bluetooth
®
indicator
blinks blue.
2. On your mobile device, delete Bose Solo system from the
Bluetooth menu.
The system emits a tone and is ready to pair a device
(see “Pairing a Bluetooth
®
device”).
14 - English
Getting System Information
System indicators
The status and Bluetooth
®
indicators on the front of the system provide information on system activity.
Bluetooth
®
indicator
Status indicator
Status indicator
Indicator activity System state
Off System off (standby)
Green Solid: System is on
Blinking: System is muted
Amber Dim: Standby, auto-wake is enabled
Solid: Dialogue mode
Blinking: Dialogue mode, system is muted
Red System error: Call Bose Customer Service. Refer to the contact sheet in the carton.
Bluetooth
®
indicator
Indicator activity System state
Blue Blinking: Ready to pair
White Blinking: Connecting
Solid: Connected
Alternate Setup
English - 15
Alternate Setup
You may need to use an alternate setup method for the following reasons:
No sound from a source(s) connected to your TV
No optical, coaxial or analog connector on your TV
No sound from a source(s) connected to your TV
Some TVs do not deliver sound from connected sources to the system. Use an alternate setup method to directly connect your source(s) to
the system.
Problem What to do
No sound from a source connected to your TV Connect your source to the system using one of the three cable options. (See page 16.)
No sound from two sources connected to your TV Connect your sources to the system using Option 1 or Option 2. (See page 16.)
No optical, coaxial or analog connector on your TV
Some TVs do not have optical, coaxial or analog connectors. Use an alternate setup method to connect your TV to the system.
Problem What to do
TV only has a headphones connector Connect your TV using a 3.5 mm stereo cable (not provided). (See page 17.)
TV has no audio outputs Use the audio outputs on another source, such as a cable/satellite box to connect to the
system. (See page 16.)
16 - English
Alternate SetupAlternate Setup
Connecting a source to the system
If you do not get sound from a source, such as a DVD/Blu-ray
Disc
player, cable/satellite box, game system or DVR connected
to your TV, connect it to the system.
CAUTION: If using an optical cable, remove the protective caps
from both ends. Inserting the plug in the wrong
orientation can damage the plug and/or the connector.
1. On the back of your cable/satellite box, locate the Audio Out
(digital) connector panel.
Audio OUT
Source connector
panel
System connector panel
2. Choose an audio cable.
3. Connect the audio cable from your cable/satellite box’s
Audio Out (digital) connector panel to the system.
Note: Do not disconnect your source’s video cable, such as an
HDMI
cable, from your TV.
Connecting two sources to the system
If you do not get sound from any sources, such as a DVD/Blu-ray
Disc
player, cable/satellite box, game system or DVR, connected
to your TV, connect it to the system. Use only one audio cable for
each source.
1. On the back of each source, locate the Audio Out (digital)
connector panel.
2. Choose a separate audio cable for each source using either
Option 1 or Option 2 (see page 17).
Note: You MUST use either Option 1 or Option 2. Do not use
the coaxial cable and optical cable at the same time.
3. Separately connect the chosen audio cable from each source’s
Audio Out (digital) connector panel to the system.
Note: Do not disconnect your source’s video cable, such as an
HDMI
cable, from your TV.
Option 1
This figure shows two source connections using an optical cable
and analog cable.
CAUTION: If using an optical cable, remove the protective caps
from both ends. Inserting the plug in the wrong
orientation can damage the plug and/or the connector.
Audio OUT
Source 2
Audio OUT
Source 1
System connector panel
English - 17
Alternate Setup
Option 2
This figure shows two source connections using a coaxial cable
and analog cable.
Audio OUT
Source 2
Audio OUT
Source 1
System connector panel
Using two sources connected to the system
Power off sources when not in use. In order for one source to
deliver audio to the system, your other source must be off.
Connecting a TV headphones connector to
the system
If your TV only has a headphones connector, use a 3.5 mm to RCA
stereo cable (not provided) to connect to the system.
1. Insert the stereo plug into the TV headphones connector.
2. Insert the red plug into the R connector on the system.
3. Insert the white plug into the L connector on the system.
4. Ensure your TV speakers are on. Refer to your TV’s owner’s
guide for more information.
5. To ensure optimal volume control from the system,
Set your TV’s volume to 75 percent of maximum.
Next, set the volume level of the system using the
remote control.
System connector panel
Audio OUT
TV headphones connector panel
(or other variable audio output)
3.5 mm Stereo cable
(not provided)
18 - English
Care and MaintenanceCare and Maintenance
Troubleshooting
Problem What to do
No power Secure both ends of the power cord.
Plug the power cord into a live AC (mains) outlet.
Unplug the power cord for at least one minute and reconnect.
No audio Unmute the system.
Increase the volume.
Plug the audio cable into a connector on your TV labelled Audio Output or Audio OUT, not Audio Input or Audio IN.
Use only one audio cable.
Secure all cable connections and ensure they are correct.
Select the correct TV input.
Enable your TV’s audio output and select the correct setting, such as such as Stereo or 5.1 Channel Audio. Refer to
your TV’s owner’s guide for more information.
Use alternate setup (see page 15).
If connecting to two sources:
Power off the other source.
Ensure that you are not using an optical cable and coaxial cable.
If the system is connected to a TV output labelled VARIABLE (VAR), power off your TV speakers, set your TV volume to
75 percent of maximum and unmute your TV.
If connecting through a TV headphones output, increase your TV volume to the maximum limit.
Unplug the power cord for at least one minute and reconnect.
Cannot play
Bluetooth
®
audio
On the system:
Pair a device (see page 13).
Clear the system’s pairing list (see page 13).
Try pairing a different device.
On your Bluetooth device:
Turn off and on the Bluetooth feature.
Remove the system from the Bluetooth
menu. Pair again.
Use a different music source.
Check your Bluetooth device for compatibility. Refer to your Bluetooth device’s owner’s guide.
Increase the volume on the system, your mobile device and music source.
Ensure you are using the correct device.
If multiple Bluetooth devices are connected, pause your streaming device first.
Disconnect other Bluetooth devices when not in use.
See “No audio” or “Distorted Audio”.
Distorted audio
Secure cable connections on the system and TV (or other connected sources).
If the system is connected to a TV output labelled VARIABLE (VAR), reduce the TV volume.
Use alternate setup (see page 15).
Unplug the power cord for at least one minute and reconnect.
Remote control is inconsistent or
does not work
Check the batteries to see if they are installed properly or if they need to be replaced (see page 19).
Point the remote control directly at the system.
Check that the status indicator flashes when you press the remote volume or mute button.
Unplug the power cord for at least one minute and reconnect.
Sound is coming from the TV
Turn off your TV speakers (see page 8).
Mute or decrease the volume your TV.
Status indicator is red
System error: Call Bose Customer Service. Refer to the contact sheet in the carton.
English - 19
Care and Maintenance
Replacing the remote batteries
Solo 15 series II system remote control
Replace both batteries when the remote control stops operating or
its range seems reduced. Use Alkaline batteries.
1. Slide open the battery compartment cover on the back of
the remote.
2. Remove both batteries.
Dispose of the batteries according to the regulations in
your area.
3. Insert two AA (IEC-LR6) 1.5V batteries or the equivalent. Match
the + and – symbols on the batteries with the + and – markings
inside the compartment.
4. Slide the battery compartment cover back into place.
Solo 10 series II system remote control
Replace the battery when the remote control stops operating or its
range seems reduced. Use a lithium battery.
1. Using a coin, turn the battery cover slightly left.
2. Remove the cover and insert the new battery (CR2032 or
DL2032) flat side up, with the plus (+) symbol in view.
3. Reseat the cover and turn it right to lock into place.
WARNING: Do not ingest battery, chemical burn hazard.
The remote control supplied with this product contains a
coin/button cell battery. If the coin/button cell battery is
swallowed it can cause severe internal burns in just two
hours and can lead to death. Keep new and used batteries
away from children. If the battery compartment does not
close securely, stop using the product and keep it away from
children. If you think the battery may have been swallowed or
placed inside any part of the body, seek immediate medical
attention. The coin/button cell battery may explode or cause
a fire or chemical burn if incorrectly replaced or mishandled.
Do not recharge, disassemble, heat above 212°F (100°C) or
incinerate. Replace only with an agency approved (ex. UL)
CR2032 or DL2032 3-volt lithium battery. Dispose of used
batteries promptly.
Cleaning
Clean the surface of the system with a soft, dry cloth.
Do not use any sprays near the system. Do not use any solvents,
chemicals, or cleaning solutions containing alcohol, ammonia or
abrasives.
Do not allow liquids to spill into any openings.
Customer service
For additional help, contact Bose Customer Service. Refer to the
contact sheet in the carton.
Limited warranty
Your system is covered by a limited warranty. Details of the limited
warranty are provided on the product registration card in the
carton. Please refer to the product registration card for instructions
on how to register. Failure to register will not affect your limited
warranty rights.
The warranty information provided with this product does
not apply in Australia or New Zealand. See our website at
www.bose.com.au/warranty or www.bose.co.nz/warranty for
details of the Australia and New Zealand warranty.
Technical Information
Power rating
100-240V
50/60 Hz 50W
2 - Dansk
Oplysninger om reglerVigtige sikkerhedsinstruktioner
Læs venligst denne brugervejledning omhygeligt,
oggem den, så du har adgang til den senere.
Et lyn med pilehoved i en ligebenet trekant med gør brugeren opmærksom
på, at der i systemets kabinet kan være uisoleret farlig spænding, der kan
være så kraftig, at der er risiko for elektrisk stød.
Mærket med et udråbstegn i en ligesidet trekant skal gøre brugeren
opmærksom på vigtige betjenings- og vedligeholdelsesinstruktioner i
denne brugervejledning.
ADVARSLER:
Systemet må ikke udsættes for regn eller fugt af hensyn til risikoen for
brand eller elektrisk stød.
Udsæt ikke dette apparat for dryp eller stænk, og placer ikke genstande,
der er fyldt med væske, på eller nær ved apparatet. Som det gælder for
alle elektriske apparater skal du passe på ikke at spilde væske på nogen
dele af produktet. Hvis produktet udsættes for væske, kan det medføre
fejl og/eller risiko for brand.
Placer ikke nogen form for åben ild (f.eks. stearinlys) på eller tæt ved
apparatet.
Lad ikke børnene skubbe til, trække i eller klatre på en skærm. Dette
kan få den til at vælte, hvilket kan forårsage personskade eller dødsfald.
Sikkerheden og stabiliteten kan øges ved at fastgøre skærmen ved hjælp
af en egnet anti-vippe enhed.
Placer aldrig udstyret på et ustabilt underlag. Udstyret kan falde ned
og forårsage alvorlig personskade eller dødsfald. Mange personskader
(især dem, der rammer børn) kan undgås ved at tage nogle enkle
forholdsregler som f.eks.:
Brug de kabinetter eller stativer, som anbefales af producenten af udstyret.
– Brug kun møbler, som uden problemer kan bære udstyret.
Sørg for, at udstyret er placeret helt inde på det møbel, som det står på.
Undgå at placere udstyret på høje møbler (for eksempel skabe eller
reoler) uden at forankre både møblet og udstyret til en væg på en
passende måde.
Undgå at placere udstyret på stof eller andre materialer, som placeres
mellem udstyret og det møbel, som udstyret står på.
Fortæl børnene om, hvor farligt det er at klatre på møblerne for at nå
udstyret eller knapperne på udstyret.
Hvis du ikke er sikker på, at du selv kan montere dette produkt på en
sikker måde, skal du få en professionel installatør til at hjælpe dig.
ADVARSLER:
Fjernbetjening til Solo 10 series II system: Undgå at sluge batteriet –
fare for kemiske forbrændinger.
Den fjernbetjening, der følger med dette produkt, indeholder et mønt-/
knapcellebatteri. Hvis mønt-/knapcellebatteriet sluges, kan det
forårsage alvorlige indre forbrændinger på blot to timer, hvilken kan
være livsfarligt. Opbevar nye og brugte batterier utilgængeligt for børn.
Hvis batterirummet ikke lukker ordentligt, skal du ophøre med at bruge
produktet og opbevare det utilgængeligt for børn. Hvis du har mistanke
om, at batteriet kan være blevet slugt eller er kommet ind et andet
sted i kroppen, skal du straks søge læge. Mønt-/knapcellebatteriet
kan eksplodere eller forårsage brand eller kemiske forbrændinger,
hvis det ikke udskiftes korrekt, eller hvis det håndteres forkert. Undlad
at genoplade batteriet, skille det ad, opvarme det til over 100° C eller
brænde det. Må kun udskiftes med et institutgodkendt (f.eks. UL) CR2032
eller DL2032 3-volt litiumbatteri. Bortskaf brugte batterier omgående.
Fjernbetjening til Solo 15 series II system: Undlad at åbne, flænse
eller på anden måde skille batteriet eller cellerne ad. Undlad at udsætte
batterierne for varme eller ild. Undgå opbevaring i direkte sollys. Undlad
at kortslutte batteriet. Undgå at opbevare batterierne løst i en æske
eller en skuffe, hvor de kan kortslutte hinanden eller blive kortsluttet
af andre metalgenstande. Fjern ikke et batteri fra den oprindelige
emballage, før det skal bruges. Udsæt ikke batterierne for mekaniske
stød. Hvis et batteri lækker, må du ikke lade væsken komme i kontakt
med huden eller øjnene. Hvis det sker, skal det berørte område vaskes
med rigelige mængder vand, og der skal søges lægehjælp. Find plus- (+)
og minusmærkerne (-) på batteriet og udstyret, og sørg for, at batteriet
anvendes korrekt. Brug ikke batterier eller celler, som ikke er designet
til brug sammen med produktet. Opbevar batterierne utilgængeligt for
børn. Søg læge med det samme, hvis et batteri er blevet slugt. Køb
altid det korrekte batteri til udstyret. Hold batterierne rene og tørre.
Tør batterikontakterne af med en ren, tør klud, hvis de bliver snavsede.
Brug kun batteriet til det formål, som det er beregnet til. Fjern om muligt
batteriet fra udstyret, når det ikke er i brug. Må kun udskiftes med AA-
alkalinebatterier (IEC LR06).
FORSIGTIG! Foretag ikke nogen uautoriserede ændringer af produktet.
Dette kan kompromittere sikkerheden, regeloverholdelsen og
systemets ydeevne og kan medføre, at garantien bortfalder.
ADVARSEL:
Dette produkt indeholder magnetisk materiale. Kontakt din
læge, hvis du er i tvivl om, hvorvidt dette kan påvirke din
implanterbare medicinske enheds funktion.
ADVARSEL: Indeholder små dele, som kan udgøre en kvælningsfare.
Egner sig ikke til børn under 3 år.
NOTER:
• Produktmærkaten er placeret i bunden af produktet.
Hvis netstikket eller stikdåsen anvendes som afbryder, skal denne afbryder
være let at komme til.
Dette produkt skal anvendes inden døre. Det er hverken designet eller testet til
udendørs brug i fritidskøretøjer eller i lystbåde.
Bose Corporation erklærer hermed, at dette produkt stemmer overens
med de væsentlige krav og andre relevante bestemmelser i direktiv
1999/5/EF og alle andre relevante krav i EU-direktiver. Den fulde
overensstemmelseserklæring kan findes på www.Bose.com/compliance
Bortskaf brugte batterier i henhold til lokale bestemmelser. Batterier må
ikke brændes.
Vigtige sikkerhedsinstruktioner
1. Læs disse instruktioner.
2. Gem disse instruktioner.
3. Ret dig efter alle advarsler.
4. Følg alle instruktioner.
5. Anvend ikke dette apparat i nærheden af vand.
6. Rengør kun med en tør klud.
7. Undgå at blokere ventilationsåbningerne. Installer i overensstemmelse med
producentens instruktioner.
8. Installer ikke produktet i nærheden af varmekilder som f.eks. radiatorer,
varmeovne, komfurer eller andre apparater (herunder forstærkere),
der producerer varme.
9. Beskyt strømforsyningen eller netledningen mod at blive trådt på eller klemt,
specielt ved stikket, stikkontakter, og hvor den kommer ud af udstyret.
10. Brug kun tilslutningsudstyr/tilbehør, der er angivet af producenten.
11. Afbryd strømmen til apparatet under tordenvejr, eller når det står ubrugt i
lang tid.
12. Overlad al servicering til kvalificeret servicepersonale. Et serviceeftersyn
er påkrævet, når apparatet på nogen måde er beskadiget, hvis f.eks.
strømforsyningen eller netledningen er beskadiget, der er blevet spildt
væske, eller der er kommet objekter ind i apparatet, hvis apparatet er blevet
udsat for regn eller fugt, ikke virker normalt eller er blevet tabt.
Dette symbol betyder, at produktet ikke må smides ud som
husholdningsaffald og bør indleveres til en passende indsamlingsordning
med henblik på genanvendelse. Korrekt bortskaffelse og genanvendelse
bidrager til at beskyttelse naturressourcer, menneskets sundhed og
miljøet. Hvis du ønsker flere oplysninger om bortskaffelse og
genanvendelse af dette produkt, kan du kontakte din kommune,
dit renovationsselskab eller den butik, hvor du har købt dette produkt.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95
  • Page 96 96
  • Page 97 97
  • Page 98 98
  • Page 99 99
  • Page 100 100
  • Page 101 101
  • Page 102 102
  • Page 103 103
  • Page 104 104
  • Page 105 105
  • Page 106 106
  • Page 107 107
  • Page 108 108
  • Page 109 109
  • Page 110 110
  • Page 111 111
  • Page 112 112
  • Page 113 113
  • Page 114 114
  • Page 115 115
  • Page 116 116
  • Page 117 117
  • Page 118 118
  • Page 119 119
  • Page 120 120
  • Page 121 121
  • Page 122 122
  • Page 123 123
  • Page 124 124
  • Page 125 125
  • Page 126 126
  • Page 127 127
  • Page 128 128
  • Page 129 129
  • Page 130 130
  • Page 131 131
  • Page 132 132
  • Page 133 133
  • Page 134 134
  • Page 135 135
  • Page 136 136
  • Page 137 137
  • Page 138 138
  • Page 139 139
  • Page 140 140
  • Page 141 141
  • Page 142 142
  • Page 143 143
  • Page 144 144
  • Page 145 145
  • Page 146 146
  • Page 147 147
  • Page 148 148
  • Page 149 149
  • Page 150 150
  • Page 151 151
  • Page 152 152
  • Page 153 153
  • Page 154 154
  • Page 155 155
  • Page 156 156
  • Page 157 157
  • Page 158 158
  • Page 159 159
  • Page 160 160
  • Page 161 161
  • Page 162 162
  • Page 163 163
  • Page 164 164
  • Page 165 165
  • Page 166 166
  • Page 167 167
  • Page 168 168
  • Page 169 169
  • Page 170 170
  • Page 171 171
  • Page 172 172
  • Page 173 173
  • Page 174 174
  • Page 175 175
  • Page 176 176
  • Page 177 177
  • Page 178 178
  • Page 179 179
  • Page 180 180
  • Page 181 181
  • Page 182 182
  • Page 183 183
  • Page 184 184
  • Page 185 185
  • Page 186 186
  • Page 187 187
  • Page 188 188
  • Page 189 189
  • Page 190 190
  • Page 191 191
  • Page 192 192
  • Page 193 193
  • Page 194 194
  • Page 195 195
  • Page 196 196
  • Page 197 197
  • Page 198 198
  • Page 199 199
  • Page 200 200
  • Page 201 201
  • Page 202 202
  • Page 203 203
  • Page 204 204
  • Page 205 205
  • Page 206 206
  • Page 207 207
  • Page 208 208
  • Page 209 209
  • Page 210 210
  • Page 211 211
  • Page 212 212
  • Page 213 213
  • Page 214 214
  • Page 215 215
  • Page 216 216
  • Page 217 217
  • Page 218 218
  • Page 219 219
  • Page 220 220
  • Page 221 221
  • Page 222 222
  • Page 223 223
  • Page 224 224
  • Page 225 225
  • Page 226 226
  • Page 227 227
  • Page 228 228
  • Page 229 229
  • Page 230 230
  • Page 231 231
  • Page 232 232
  • Page 233 233
  • Page 234 234
  • Page 235 235
  • Page 236 236

Bose solo-10-series-ii Le manuel du propriétaire

Catégorie
Lecteurs Blu-Ray
Taper
Le manuel du propriétaire