LG 41683 Le manuel du propriétaire

Model/Modèle: 796.4168*

Kenmore Elite®

Front-Loading

Automatic Washer

Laveuse automatique à

chargement frontal

MFL68005557

Sears Canada Inc.

Toronto, Ontario, Canada M5B 2C3

www.sears.ca

Use & Care Guide

Mode d’emploi et guide d’utilisation

English / Français

* = color number, code couleur

®

For best results, a low-sudsing, HE High Efﬁciency

Detergent made for high efﬁciency washers must

be used.

Pour obtenir les meilleurs résultats, il est conseillé

d’utiliser un détergent Haute Efﬁcacité HE à faible

production de mousse, conçu pour les laveuses

haute efﬁcacité.

2

TABLE OF CONTENTS

PRODUCT RECORD

Master Protection Agreements

Congratulations on making a smart purchase. Your new

Kenmore Elite® product is designed and manufactured

for years of dependable operation. But like all products,

it may require preventive maintenance or repair from

time to time. That’s when having a Master Protection

Agreement can save you money and aggravation.

The Master Protection Agreement also helps extend the

life of your new product. Here’s what the Agreement

includes:

þ Parts and labor needed to help keep products

operating properly under normal use, not just defects.

Our coverage goes well beyond the product warranty.

No deductibles, no functional failure excluded from

coverage – real protection.

þ Expert service by a force of more than 2,500

authorized Sears service technicians, which means

someone you can trust will be working on your product.

þ Unlimited service calls and nationwide service, as often

as you want us, whenever you want us.

þ “No-lemon” guarantee – replacement of your covered

product if four or more product failures occur within

twelve months.

þ Product replacement if your covered product can’t be

xed.

þ Annual Preventive Maintenance Check at your request -

no extra charge.

þ Power surge protection against electrical damage due

to power uctuations.

þ $250 Food Loss Protection annually for any food

spoilage that is the result of mechanical failure of any

covered refrigerator or freezer.

þ 10% discount o the regular price of any non-covered

installed parts.

Once you purchase the Agreement, a simple phone call

is all that it takes for you to schedule service. You can

call anytime day or night.

The Master Protection Agreement is a risk free purchase.

If you cancel for any reason during the product

warranty period, we will provide a full refund. Or, a

prorated refund anytime after the product warranty

period expires. Purchase your Master Protection

Agreement today!

Some limitations and exclusions apply. For full details

call Sears Canada at 1-800-361-6665.

In the space below, record the date of purchase, model,

and serial number of your product. You will nd the model and

serial number printed on an identication plate located inside

the washer door. Have these items of information available

whenever you contact Sears concerning your

product.

Model No.

Date of Purchase

Serial No.

Save these instructions and your sales receipt for future

reference.

PROTECTION AGREEMENTS

IMPORTANT SAFETY INSTRUCTIONS ............................. 3-5

GROUNDING REQUIREMENTS.............................................5

FEATURES AND BENEFITS

Key Parts and Components .................................................6

Included Accessories ........................................................... 6

Optional Accessories ........................................................... 6

INSTALLATION REQUIREMENTS

Key Dimensions and Specications ...................................7

Choose the Proper Location ................................................ 7

Flooring .................................................................................7

Clearances ............................................................................. 7

INSTALLATION INSTRUCTIONS

Unpacking and Removing Shipping Bolts ..........................8

Connecting the Water Lines ................................................ 9

Connecting the Drain Hose ................................................10

Connect to the Power Supply ............................................ 10

Leveling the Washer ............................................................ 11

Installation of Non-Skid Pads (optional) ...........................11

HOW TO USE

Control Panel Features ........................................................ 12

Operating the Washer ........................................................13

Cycle Guide .................................................................... 14-15

Sorting Wash Loads ............................................................16

About the Dispenser Drawer ............................................. 17

Detergent and Dispenser Use ............................................18

Time and Status Display .....................................................19

Cycle Modier Buttons ....................................................... 20

Steam Cycles and Options .................................................21

Special Functions ................................................................22

CARE AND CLEANING

Regular Cleaning .......................................................... 23-24

Maintenance ..................................................................25-26

Cleaning the Water Inlet Filters....................................25

Cleaning the Drain Pump Filter.....................................26

KENMORE CONNECT™ SYSTEM

Using Kenmore Connect™ System ................................... 27

TROUBLESHOOTING GUIDE

Normal Sounds You May Hear .........................................28

Before Calling for Service .......................................... 28-30

WARRANTY ............................................................................ 31

SEARS PARTS AND REPAIR SERVICES .............................. 32

3

There are many important safety messages in this manual and on your appliance. Always read and obey all safety

messages.

This is the safety alert symbol. This symbol alerts you to potential hazards that can result in property

damage and/or serious bodily harm or death.

All safety messages will follow the safety alert symbol and either the word WARNING.

This word means:

Indicates a hazardous situation which, if not avoided, will result in death or serious injury.

All safety messages will tell you what the potential hazard is, tell you how to reduce

the chance of injury, and tell you what can happen if the instructions are not followed.

WARNING

To reduce the risk of re, electric shock, or injury

to persons when using this appliance, follow basic

precautions, including the following.

• Before use, the washer must be properly installed as

described in this manual.

• Do not wash articles that have been previously

cleaned in, washed in, soaked in, or spotted with

gasoline, dry cleaning solvents, or other ammable

or explosive substances, as they give o vapors that

could ignite or explode.

• Do not add gasoline, dry cleaning solvents, or other

ammable or explosive substances to the wash water.

These substances give o vapors that could ignite or

explode.

• Under certain conditions, hydrogen gas may be

produced in a hot water system that has not been

used for two weeks or more. HYDROGEN GAS IS

EXPLOSIVE. If the hot water system has not been used

for such a period, before using the washer, turn ON

all hot water faucets and let the water ow from each

for several minutes. This will release any accumulated

hydrogen gas. As the gas is ammable, do not smoke

or use an open ame during this time.

• Do not allow children to play on or in the washer.

Close supervision of children is necessary when the

washer is used near children.

• Before the washer is removed from service or

discarded, remove the door to prevent children from

being trapped inside the washer.

• Do not install or store the washer where it will be

exposed to the weather or freezing temperatures.

• Do not tamper with controls.

• Do not repair or replace any part of the washer or

attempt any servicing other than as described in this

manual. We strongly recommend that any service be

performed by a qualied technician.

• See Installation Instructions for grounding requirements.

• ALWAYS follow the fabric care instructions supplied by

the garment manufacturer.

• Do not place items exposed to cooking oil in your

washer. Items contaminated with cooking oils may

contribute to a chemical reaction that could cause a

load to catch re.

• Use fabric softeners or products to eliminate static

only as recommended by the manufacturer.

• This washer is not designed for maritime use or for

mobile installations such as in RVs, aircraft, etc.

• Turn OFF the water faucets and unplug the washer if

the machine is to be left for an extended period of

time, such as during vacations.

• Packaging material can be dangerous for children.

There is a risk of suocation. Keep all packaging

from children.

• Always check the inside of the washer for foreign

objects before loading laundry. Keep the door closed

when not in use.

SAFETY MESSAGES

IMPORTANT SAFETY INSTRUCTIONS

WARNING

4

• To reduce the risk of re, electric shock, or injury

to persons when using this appliance, follow basic

precautions, including the following.

• Unplug the washer before cleaning to avoid the risk

of electric shock.

• Never use harsh chemicals, abrasive cleaners, or

solvents to clean the washer. They will damage the

nish.

• Do not put oily or greasy rags or clothing on top of

the washer. These substances give o vapors that

could ignite the materials.

• Do not wash items that are soiled with vegetable or

cooking oil. These items may contain some oil after

laundering and may catch re.

• Disconnect this appliance from the power supply

before attempting any user maintenance. Turning the

controls to the OFF position does not disconnect this

appliance from the power supply. Failure to follow

this warning can cause serious injury, re, electric

shock, or death.

• Do not combine detergents, fabric softeners, and/or

other laundry products from di erent manufacturers

for use in a load, unless specied on the fabric label.

• Do not mix chlorine bleach with ammonia or acids

such as vinegar. Follow package directions when

using laundry products. Incorrect usage can produce

poisonous gas, resulting in serious injury or death.

• Do not reach into the washer while parts are moving.

Before loading, unloading, or adding items, push in

the cycle selector knob and allow the drum to coast

to a complete stop before reaching inside. Failure

to follow this warning can cause serious injury, re,

electric shock or death.

• Refer to INSTALLATION INSTRUCTIONS for detailed

grounding procedures. Installation instructions are

packed in the washer for the installer’s reference. If the

washer is moved to a new location, have it checked

and reinstalled by a qualied service technician.

Failure to follow this warning can cause serious injury,

re, electric shock, or death.

• Do not, under any circumstances, cut or remove the

third (ground) prong from the power cord. Failure

to follow this warning can cause serious injury, re,

electric shock, or death.

• For personal safety, this appliance must be properly

grounded. Failure to follow this warning can cause

serious injury, re, electric shock, or death.

• The power cord of this appliance is equipped with

a 3-prong (grounding) plug which mates with a

standard 3-prong (grounding) wall outlet to minimize

the possibility of electric shock hazard from this

appliance.

• This washer must be plugged into a 120VAC, 60Hz

grounded outlet. Failure to follow this warning can

cause serious injury, re, electric shock, or death.

• Have the wall outlet and circuit checked by a

qualied electrician to make sure the outlet is

properly grounded. Failure to follow this warning can

cause serious injury, re, electric shock, or death.

• Where a standard 2-prong wall outlet is encountered,

it is your personal responsibility and obligation to

have it replaced with a properly grounded 3-prong

wall outlet. Failure to follow this warning can cause

serious injury, re, electric shock, or death.

• Do not install on carpet. Install the washer on a solid

oor. Failure to follow this warning can cause serious

leak damage.

• Do not remove grounding prong. Do not use an

adapter or extension cord. Plug into a grounded

3-prong outlet. Failure to follow these warnings can

cause serious injury, re, electric shock, or death.

• The washer should always be plugged into its own

individual electrical outlet which has a voltage rating

that matches the rating plate. This provides the best

performance and also prevents overloading house

wiring circuits which could cause a re hazard from

overheated wires.

• Never unplug your washer by pulling on the power

cord. Always grip plug rmly and pull straight out

from the outlet. Failure to follow this warning can

cause serious injury, re, electric shock, or death.

• Immediately repair or replace all power cords that

have become frayed or otherwise damaged. Do not

use a cord that shows cracks or abrasion damage

along its length or at either end. Consult with a

qualied service technician. Failure to follow this

warning can cause serious injury, re, electric shock,

or death.

• When installing or moving the washer, be careful not

to pinch, crush, or damage the power cord. Failure

to follow this warning can cause serious injury, re,

electric shock, or death.

• The washer must be installed and electrically

grounded by a qualied service technician in

accordance with local codes to prevent shock hazard

and assure stability during operation.

• The washer is heavy. Two or more people may be

needed to install and move the appliance. Failure

to do so can result in damage to property or serious

bodily injury.

• Store and install the washer where it will not be

exposed to temperatures below freezing or exposed

to outdoor weather conditions. Failure to follow this

warning can cause serious leak damage.

• To reduce the risk of electric shock, do not install the

washer in humid spaces. Failure to follow this warning

can cause serious injury, re, electric shock, or death.

IMPORTANT SAFETY INSTRUCTIONS

WARNING

5

GROUNDING INSTRUCTIONS

This appliance must be grounded. In the event of

malfunction or breakdown, grounding will reduce

the risk of electric shock by providing a path of

least resistance for electric current. This appliance is

equipped with a cord having an equipment-grounding

conductor and grounding plug. The plug must be

plugged into an appropriate outlet that is properly

installed and grounded in accordance with all local

codes and ordinances.

• Do not use extention cord.

• Do not remove ground pin from plug.

Improper connection of the equipment-grounding

conductor can result in risk of electric shock. Check

with a qualied electrician or service technician

if you are in doubt as to whether the appliance

is properly grounded. Do not modify the plug

provided with the appliance. If it does not t the

outlet, have a proper outlet installed by a qualied

electrician. Failure to follow these warnings can

cause serious injury, re, electric shock, or death.

WARNING

• Do not allow children to play on or in the washer.

Close supervision of children is necessary when the

washer is used near children. As children grow, teach

them the proper, safe use of all appliances. Failure

to comply with these warnings could result in serious

personal injury.

• Destroy the carton, plastic bag, and other packing

materials after the washer is unpacked. Children

might use them for play. Cartons covered with rugs,

bedspreads, or plastic sheets can become airtight

chambers. Failure to comply with these warnings could

result in serious personal injury

• Keep laundry products out of children’s reach. To

prevent personal injury, observe all warnings on

product labels. Failure to comply with these warnings

could result in serious personal injury.

• Before your washer is removed from service

or discarded, remove the door to the washing

compartment to avoid the danger of children or small

animals getting trapped inside. Failure to do so can

result in serious personal injury or death.

IMPORTANT: Please read carefully.

TO CONNECT ELECTRICITY

Ensure proper

ground exists

before use.

3-prong

grounding type

wall receptacle

3-prong

grounding

plug

IMPORTANT SAFETY INSTRUCTIONS

WARNING: RISK TO CHILDREN

GROUNDING REQUIREMENTS

6

A

B

C

D

E

F

G

H

I

A

B

C

D

E

F

G

H

I

DETERGENT DISPENSER

There are four compartments. One each for prewash,

main wash, liquid bleach, and liquid fabric softener.

CONTROL PANEL WITH LED DISPLAY

The easy-to-read LED display shows cycle options,

settings, cycle status, and estimated time remaining

during operation.

NOTE: Sensors in the washer automatically detect

the size of the wash load to optimize washing time,

based on the selected cycle and options.

DIRECT-DRIVE MOTOR

The direct-drive motor provides improved

performance and reliability while increasing energy

eciency. (Motor is not visible.)

LARGE-CAPACITY STAINLESS STEEL DRUM

The ultra-large stainless steel drum oers extreme

durability and is tilted to improve eciency and

allow easier access for large items.

EASY-ACCESS LOCKING DOOR

The extra-large door locks during operation. The

door will not open until it is safe to do so.

FILTER ACCESS PANEL

Provides easy access to the drain pump lter, which

allows you to clean the lter or retrieve lost items

without a service call.

LEVELING FEET

Four leveling feet (two in the front and two in the

back) adjust to improve washer stability on uneven

oors. Feet are adjusted and locked in place using

the adjusting wrench included with the washer.

HIGH-EFFICIENCY STEAM CYCLES

During high-eciency steam cycles, hot steam

interacts with fabrics to help remove tough stains.

DOOR MAGNET

Safely and conveniently keeps the door ajar. There

are two door closed positions, fully closed and

slightly ajar. In the latter position, the door is only

closed to the door magnet to keep the door slightly

open when the washer is not in use. This will promote

air circulation and allow the interior of the machine

to dry. To use this feature, close the door just until it

contacts the door magnet.

Wrench appearance may vary.

Included Accessories

Non-skid pads

Wrench (for removing

shipping bolts and

adjusting and locking

leveling feet)

Tie Strap

(for securing drain

hose)

Elbow Bracket

(for securing

drain hose)

Caps (4)

(for covering shipping bolt holes)

Cold and Hot Water Inlets

Power

Cord

Drain

Hose

Rear of Washer

Shipping Bolts/Retainers (4)

NOTE: Bolts/Retainers MUST be removed prior to

operation. Keep for future use.

Optional Accessories

Hot and Cold Water Hoses

Pedestal

Stacking kit (For dryer)

Drain Hose Extension

KEY PARTS AND COMPONENTS

FEATURES AND BENEFITS

7

• This washer is heavy. Two or more people are

required when moving and unpacking the washer.

Failure to do so may result in damage to property or

serious bodily harm.

• Store and install the washer where it will not be

exposed to temperatures below freezing or exposed

to outdoor weather conditions. Failure to follow this

warning can cause serious injury, re, electric shock, or

death.

• Properly ground the washer to conform with all

electric governing codes and ordinances. Failure

to follow this warning can cause serious injury, re,

electric shock, or death.

• To reduce the risk of electric shock, do not install the

washer in humid spaces. Failure to follow this warning

can cause serious injury, re, electric shock, or death.

• To ensure proper air ow, do not block the large

opening on the bottom of the washer with carpeting

or other materials.

• Do not remove ground prong. Do not use an adapter

or extension cord. Plug into a grounded 3-prong

outlet. Failure to follow this warning can cause serious

injury, re, electric shock, or death.

Power Outlet

• The power outlet must be within 60 in. (1.5 m) of either

side of the washer.

• The appliance and outlet must be positioned so that

the plug is easily accessible.

• Do not overload the outlet with more than one

appliance.

• The outlet must be grounded in accordance with

current wiring electric codes and regulations.

• Time-delay fuse or circuit breaker is recommended.

NOTE: It is the personal responsibility and obligation of

the product owner to have a proper outlet installed by a

qualied service technician.

• To minimize noise and vibration, the washer MUST be

installed on a solidly constructed oor. See the NOTE to

your right.

• Allowable slope under the entire washer is a maximum 1

in. dierence from side to side or from front to back.

• Installing on carpeting and soft tile surfaces is not

recommended.

• Never install the washer on a platform or weakly

supported structure.

NOTE: The oor must be strong and rigid enough to

support the weight of the washer, when fully loaded,

without exing or bouncing. If your oor has too much ex,

reinforce it to make it more rigid.

A oor that is adequate for a top-loading washer may

not be rigid enough for a front loading washer, due to the

dierence in the spin speed and direction. If the oor is not

solid, your washer may vibrate and you may hear and feel

the vibration throughout your house.

Description Front-Loading Washer

Electrical Requirements 120 VAC, 60 Hz, 10 A

Max. Water Pressure 20-120 PSI (138 - 827 kPa)

Dimensions 27 in. (W) X 31

1

/2 in. (D) X 38

11

/16 in. (H), 53

3

/4 in. (D with door open)

68.6 cm (W) X 80 cm (D) X 98.3 cm (H), 136.5 cm (D with door open)

Net Weight 205 lbs (93 kg)

Max. Spin Speed 1,300 RPM

WARNING

4 in.

(10 cm)

1 in.

(2.5 cm)

1 in.

(2.5 cm)

To ensure sucient clearance for water lines and airow,

allow minimum clearances of at least 1 in. (2.5 cm) at the

sides and 4 in. (10 cm) behind the unit. Be sure to allow

for wall, door, or oor moldings that may increase the

required clearances.

Allow at least 22

1

/4 in. (56.5 cm) in front of the washer

to open the door.

22

1

/

4

in.

(56.5 cm)

31

1

/

2

in.

(80 cm)

53

3

/

4

in.

(136.5 cm)

KEY DIMENSIONS AND SPECIFICATIONS

CHOOSE THE PROPER LOCATION

FLOORING

CLEARANCES

INSTALLATION REQUIREMENTS

27 in.

(68.6 cm)

8

When removing the washer from the carton base, be

sure to remove the foam drum support in the middle of

the carton base. See drawing below.

If you must lay the washer down to remove the base

packaging materials, always protect the side of the

washer and lay it carefully on its side. DO NOT lay the

washer on its front or back.

To prevent internal damage during transport, the washer

is equipped with four shipping bolts and plastic retainers.

IMPORTANT:

• These shipping bolts and retainers MUST NOT be

removed until just before moving the washer into its

nal position.

• These bolts and retainers MUST be removed before

operating the washer.

• Failure to remove shipping bolts and retainers may

cause severe vibration and noise, which can lead to

permanent damage to the washer.

NOTE: The power cord is secured to the back of the

washer with a shipping bolt to help prevent operation

with shipping bolts in place.

1. Starting with the bottom two shipping bolts, use the

wrench (included) to fully loosen all four shipping

bolts by turning them counterclockwise.

2. Remove the bolt assemblies by wiggling them

slightly while pulling.

3. Locate the four hole caps included in the accessory

pack and install them in the shipping bolt holes.

NOTE: Save the bolt assemblies for future use. To

prevent damage to internal components, DO NOT

transport the washer without reinstalling the shipping

bolts.

Shipping

Bolts

Power

Cord

Shipping

Bolts

Hole Cap

Foam Tub

Support

Carton

Base

UNPACKING AND REMOVING SHIPPING BOLTS

INSTALLATION INSTRUCTIONS

9

Hot

Water

Inlet

• IMPORTANT: Use new hoses when installing the

washer. Do NOT reuse old hoses.

• Water supply pressure must be between 20 psi and

120 psi (138 – 827 kPa). If the water supply pressure is

more than 116 psi (799 kPa), a pressure reducing valve

must be installed.

• Periodically check the hose for cracks, leaks, and wear,

and replace the hose if necessary.

• Make sure that the water lines are not stretched,

pinched, crushed, or kinked.

• The washer should never be installed or stored in a

location subject to freezing temperatures. Damage to

the water lines and internal mechanisms of the washer

can result. If the washer was exposed to freezing

temperatures prior to installation, allow it to stand at

room temperature for several hours before use and

check for leaks prior to operation.

• For optimal wash performance, the hot water

temperature should be set at 120°-135°F (48-57°C)

and the cold water at 60°F (15°C).

1. Inspect the threaded tting on each hose and make

sure there is a rubber seal in place in both ends.

2. Connect the water supply hoses to the HOT and

COLD water faucets tightly by hand and then

tighten another ⅔ turn with pliers.

3. Always run a gallon (3.8 L) or two of water through

each inlet hose to ush dirt, scale and other debris

out of the water lines. Doing so will help prevent

future problems with clogged lter screens, and will

also allow you to verify which hose is hot and which

is cold.

WARNING: Do not overtighten the hoses.

Overtightening can damage the valves resulting in

leaking and property damage.

4. Attach the (red) hot water line to the hot water inlet

on the back of the washer. Attach the (blue) cold

water line to the cold water inlet on the back of the

washer. Tighten the ttings securely.

NOTE: When installing the hoses onto the water inlet

valves, be careful not to cross-thread the hose ttings.

DO NOT overtighten the hoses; this could cause

damage to internal components, the valve or the hose

gasket. Overtightening could result in property damage

from leaks.

Rubber Seal

Water Faucet

Water Hose

(to water inlet

on washer)

Water Hose

(to tap)

Rubber Seal

Cold

Water

Inlet

Hot

Water

Inlet

INSTALLATION INSTRUCTIONS

CONNECTING THE WATER LINES

10

t

• The drain hose should always be properly secured.

Failure to properly secure the drain hose can result in

ooding and property damage.

• Do not install the end of the drain hose higher than 96

in. (243.8 cm) above the bottom of the washer.

• The drain must be installed in accordance with any

applicable local codes and regulations.

• Make sure that the drain hose is not stretched,

pinched, crushed, or kinked.

NOTE:

A drain hose extension kit is

available if the drain hose is

not long enough. Do not extend

the drain hose more than 6 feet

(1.83 m), as this will cause poor

draining, which will result in poor

wash and spin performance.

Option 1: Standpipe

Install the end of the drain hose into the elbow bracket.

Do not extend the drain hose more than 4 inches

(10 cm) past the end of the elbow bracket. Use a tie

strap to secure the drain hose in place.

NOTE:

• Total height of the hose end should not exceed 96 in.

(243.8 cm) from the bottom of the washer.

• The drain hose should be inserted no more than

8–12 inches into the standpipe. Inserting more

than 8-12 inches (20-30 cm) can cause mold or

microorganisms to spread to the inside of the

washer.

If the water valves and

drain are built into the

wall, fasten the drain hose

to one of the water hoses

with the tie strap (ribbed

side on inside).

Tie Strap

Option 2: Laundry Tub

CONNECT TO THE POWER SUPPLY

Washer should be plugged into a 120-VAC, 60-Hz

grounded 3-prong outlet.

Plug in the washer.

Drain Hose Extension

Utility Sink

Tie Strap

Drain Hose

Elbow

Bracket

Elbow

Bracket

Tie

Strap

Drain Hose

INSTALLATION INSTRUCTIONS

CONNECTING THE DRAIN HOSE

11

The drum of your new washer spins at very high speeds.

To minimize vibration, noise, and unwanted movement,

the oor must be a level, solid surface.

NOTE: Adjust the leveling feet only as far as necessary

to level the washer. Extending the leveling feet more than

necessary can cause the washer to vibrate.

NOTE: Before installing the washer, make

sure that the oor is clean, dry and free of

dust, dirt, water and oils so the washer feet

cannot slide easily. Leveling feet that

move or slide on the oor can contribute

to excess vibration and noise due to

poor contact with the oor. See

INSTALLATION OF NON-SKID PADS

for more information.

NOTE: If a drip pan must be used, make sure to follow

the instructions provided with the drip pan and make

sure the leveling feet are adjusted for rm and even

contact with the pan. Use of drip pans and failure to

properly level the machine may result in increased

vibration and noise during operation.

All four leveling feet must rest solidly on the oor. Rock

the washer from corner to corner to make sure that all

four leveling feet are in rm and even contact with the

oor.

1. Position the washer in its nal location, taking special

care not to pinch, strain, or crush the water and drain

lines. Place a level across the top of the washer.

2. Loosen the locknuts on all four leveling feet with the

wrench until you can adjust the feet (wrench appearance

may vary). Use the wrench to turn the feet clockwise

to raise the washer, and counterclockwise to lower the

washer. Using a level, adjust the feet until the washer is

level from side to side and front to back. Make sure that

all four feet are in rm contact with the oor.

NOTE: If you are installing the washer on the optional

pedestal, the washer leveling feet should be fully retracted.

Use the leveling feet on the pedestal to level the washer.

3. Once the washer is level from side to side and front

to back, use the adjusting wrench to tighten all four

lock nuts securely to prevent the legs from getting out

of adjustment during operation. Make sure that all

four leveling feet are in rm contact with the oor.

NOTE: To make sure that the washer is properly level,

run the washer with a test load: place a medium-sized

load of laundry in the machine. Then, press POWER,

select RINSE & SPIN, and press the START/PAUSE

button.

See the following sections for additional information

on cycle selection and operation. Verify that the

washer does not rock or vibrate excessively during

the spin cycle. If the washer vibrates or shakes, adjust

the leveling feet, while the washer is spinning, until the

vibrations are reduced.

Some oor surfaces are too slippery to prevent the

washer from moving on the oor during heavily

unbalanced loads. While it is normal for an occasional

load to be out of balance, excess noise and vibration

can result from the washer moving out of position. If

these conditions are encountered, follow the instructions

below for installation of the non-skid pads. These pads

will help prevent the washer from moving during heavy,

out of balance conditions, thereby reducing noise and

vibration.

NOTE: The non-skid pads are included in the

installation packet

Non-skid pads

Level

Leveling Feet

Raise Lower

Leveling Feet

Tighten all 4 lock nuts

securely using the

wrench.

This side up

Stick adhesive side to oor

Remove backing

*

Place the pads under both front feet.

INSTALLATION INSTRUCTIONS

INSTALLATION OF NON-SKID PADS

(optional)

LEVELING THE WASHER

12

HOW TO USE

WARNING: To reduce the risk of re, electric shock, or injury to persons, read and follow this

entire Use & Care Guide, including the Important Safety Instructions, before operating this washer.

A

POWER (ON/OFF) BUTTON

Press to turn the washer ON or OFF.

NOTE:

Pressing the POWER button during a

cycle will cancel that cycle and any load

settings will be lost. The door will unlock after a

brief pause, unless the water level or

temperature is too high.

B

CYCLE SELECTOR KNOB

Turn this knob to select the desired cycle. Once

the desired cycle has been selected, the standard

presets will appear in the display. These settings

can be adjusted using the cycle setting buttons

anytime before starting the cycle.

C

START/PAUSE BUTTON

Press this button to start the selected cycle.

If the washer is running, use this button to pause

the cycle without losing the current settings.

NOTE:

If you do not press the START/PAUSE

button within one hour of selecting a cycle, the

washer automatically turns OFF.

D

CYCLE MODIFIER BUTTONS

Use these buttons to adjust the settings for the

selected cycle. The settings light up above the

buttons to show the current selection.

E

SPECIAL CYCLE AND OPTION BUTTONS

These buttons are used to activate special cycles

or options.

F

TIME AND STATUS DISPLAY

The display shows the cycle status, door lock

status and estimated time remaining.

G

STEAM TREAT BUTTON

Select the STEAM TREAT button to add steam to

the selected cycle for added cleaning power.

NOTE:

The steam option is not available on all

cycles.

NOTE:

To protect your clothing, not all settings are available on all cycle selections.

D

A

B

C

E

F

G

CONTROL PANEL FEATURES

13

HOW TO USE

1

SORT LAUNDRY AND LOAD WASHER

Sort laundry by fabric type, soil level, color and load size,

as needed. Open the door and load selected items into the

washer.

2

TURN ON THE WASHER

Press the POWER button to turn ON the washer. The lights

around the cycle selector knob will illuminate and a chime

will sound.

3

SELECT A CYCLE

Turn the cycle selector knob in either direction to select the

desired cycle. The preset Wash Temperature, Spin Speed, Soil

Level, and Option settings for that cycle will be shown.

4

SELECT CYCLE MODIFIERS

Default settings for the selected cycle can now be changed if

desired. Use the cycle modier buttons.

NOTE:

To protect your fabrics, not all modiers are available

on all cycles.

5

SELECT CYCLE OPTIONS

Cycle options can be added using the option buttons.

NOTE:

• To protect your fabrics, not all modiers are available on

all cycles. Cycle options can also be added by using the

option buttons.

• Not all options are available on all cycles. A dierent

chime will sound and the LED will not come on if the

selection is not allowed.

6

ADD DETERGENT

Add High-Eciency (HE) detergent to the detergent

dispenser drawer. For proper wash performance, always

measure the detergent using the measure provided by the

detergent manufacturer.

7

BEGIN CYCLE

Press the START/PAUSE button to begin the cycle. The door

will lock, the washer will briey tumble the load without

water to measure its weight, and then the washer will begin

the selected wash cycle.

Pressing the START/PAUSE button will pause the cycle and

the door will unlock. Press the START/PAUSE button again to

resume the wash cycle.

OPERATING THE WASHER

14

CYCLE GUIDE

The cycle guide below shows the default settings, available options and recommended fabric types

for each cycle. Allowable modier adjustments are shown below the default setting for each cycle.

= Available Option

= Default Setting

Cycle

Fabric or

Load Type

Load

Sensing

Wash

Option

Wash

Temp.

Spin

Speed

Soil

Level

Accela

Wash

Steam

Treat

Pre

Wash

Extra

Rinse

Delay

Start

Stay

Fresh

Auto

Soak

Energy

Saver

Normal/

Casual

Cotton,

linen, towels,

shirts, sheets,

jeans, mixed

loads.

Yes Yes

Warm High Normal

Extra Hot

Hot

Cold

Tap Cold

Extra High

Medium

Low

No Spin

Heavy

Light

Heavy

Duty

Heavily

soiled cotton

fabrics.

Yes Yes

Warm Extra High Heavy

Hot

Cold

Tap Cold

High

Medium

Low

No Spin

Normal

Light

Whitest

Whites

Heavily to

normally

soiled white

cottons.

Yes Yes

Hot High Normal

Warm

Cold

Tap Cold

Extra High

Medium

Low

No Spin

Heavy

Light

Bulky

Large items

such as

blankets and

comforters.

No Yes

Warm Medium Normal

Hot

Cold

Tap Cold

Low

No Spin

Heavy

Light

Comforter

Comforters,

blankets,

rugs.

No Yes

Warm High Normal

Hot

Cold

Tap Cold

Medium

Low

No Spin

Heavy

Light

Kids

Wear

Specially

designed to

clean and

thoroughly

rinse kids

wear.

Yes Yes

Hot High Heavy

Warm

Cold

Tap Cold

Extra High

Medium

Low

No Spin

Normal

Light

Rugged

Heavily

soiled hard

and thick

items such as

jeans and

construction

work wear.

Yes Yes

N/A High N/A

Extra High

Medium

Low

No Spin

HOW TO USE

*CERTIFIED BY NSF:

NSF International (formerly the National

Sanitation Foundation), certies that this wash cycle reduces

99.9% of bacteria on laundry through high temperature, when

used with powdered detergent.

Protocol P172

Sanitization Performance of Residential and

Commercial, Family Sized Clothes Washers

NOTE:

y

To protect your garments, not every wash temperature, spin speed, soil level, or option is available with every cycle.

A chime will sound and the LED will not light if the selection is not allowed.

y

The washer automatically adjusts the wash time for the amount of laundry, water pressure, water heating time and other operating

conditions.

y

These cycles use various wash motions to enhance cleaning and/or fabric care performance. The wash motions may sound dierent

at dierent stages of the wash cycle. This is normal.

y

Do not load more than 22 lb. (10 kg) in the washer. (1 thick, dry bath towel = 1 lb. (0.45 kg))

Do not use the Sanitize cycle with more than 10 lb. (4.5 kg) of laundry.

y

Do not overload the Bulky cycle. If the washer does not function properly, manually redistribute the load or wash one item at a time.

y

When the Accela Wash option is selected, the drum spins to rinse the clothes. To use the No Spin option, you must deselect the

Accela Wash option.

15

CYCLE GUIDE (continued)

The cycle guide below shows the default settings, available options and recommended fabric types

for each cycle. Allowable modier adjustments are shown below the default setting for each cycle.

= Available Option

= Default Setting

Cycle

Fabric or

Load Type

Load

Sensing

Wash

Option

Wash

Temp.

Spin

Speed

Soil

Level

Accela

Wash

Steam

Treat

Pre

Wash

Extra

Rinse

Delay

Start

Stay

Fresh

Auto

Soak

Energy

Saver

Sanitize*

Heavily

soiled items

such as work

clothes,

diapers, etc.

Yes Yes

Extra Hot High Normal

Extra High

Medium

Low

No Spin

Heavy

Light

Workout

Wear

Permanent

press,

synthetic

items.

No Yes

Warm Medium Normal

Cold

Tap Cold

Low

No Spin

Heavy

Light

Delicates

Dress shirts,

blouses,

nylons, sheer

or lacy

garments.

No Yes

Cold Medium Normal

Warm

Tap Cold

Low

No Spin

Heavy

Light

Small

Load

Normally

soiled and

small loads.

Yes Yes

Warm High Normal

Hot

Cold

Tap Cold

Extra High

Medium

Low

No Spin

Heavy

Light

Express

Wash

Lightly soiled

clothing and

small loads.

No Yes

Hot Extra High Light

Warm

Cold

Tap Cold

High

Medium

Low

No Spin

Normal

Heavy

Cold

Clean

Small loads

of cotton,

linen, towels,

shirts, sheets,

jeans, mixed

loads.

Yes Yes

Cold High Normal

Tap Cold

Extra High

Medium

Low

No Spin

Light

Rinse &

Spin

Loads that

only need to

be rinsed.

No No

Cold High N/A

Extra High

Medium

Low

No Spin

HOW TO USE

*CERTIFIED BY NSF:

NSF International (formerly the National

Sanitation Foundation), certies that this wash cycle reduces

99.9% of bacteria on laundry through high temperature, when

used with powdered detergent.

Protocol P172

Sanitization Performance of Residential and

Commercial, Family Sized Clothes Washers

NOTE:

y

To protect your garments, not every wash temperature, spin speed, soil level, or option is available with every cycle.

A chime will sound and the LED will not light if the selection is not allowed.

y

The washer automatically adjusts the wash time for the amount of laundry, water pressure, water heating time and other operating

conditions.

y

These cycles use various wash motions to enhance cleaning and/or fabric care performance. The wash motions may sound dierent

at dierent stages of the wash cycle. This is normal.

y

Do not load more than 22 lb. (10 kg) in the washer. (1 thick, dry bath towel = 1 lb. (0.45 kg))

Do not use the Sanitize cycle with more than 10 lb. (4.5 kg) of laundry.

y

Do not overload the Bulky cycle. If the washer does not function properly, manually redistribute the load or wash one item at a time.

y

When the Accela Wash option is selected, the drum spins to rinse the clothes. To use the No Spin option, you must deselect the

Accela Wash option.

16

Fabric Care Labels

Many articles of clothing include a fabric care label.

Using the chart below, adjust the cycle and option

selections to care for your clothing according to the

manufacturer’s recommendations.

Grouping Similar Items

For the best washing results, and to reduce the possibility

of damage to clothing, care should be taken to sort the

clothing into loads that are made up of similar items.

Mixing dierent fabric types and/or soil levels can result

in poor wash performance, color transfer or discoloration,

fabric damage or linting. Fabrics should be sorted into

groups as described below.

Colors

Sort articles by color. Wash dark clothes together in a

separate load from light colors or whites. Mixing dark

clothes with light clothes can result in dye transfer or

discoloration of the lighter clothes.

Soil Level

Wash heavily soiled clothing together. Washing lightly

soiled clothing in the same load with heavily soiled

clothing could result in poor wash performance for the

lightly soiled clothing.

Fabric Type

Delicate articles should not be mixed with heavier or

sturdier fabric types. Washing delicates in a load with

heavy fabrics can result in damage to the more delicate

fabrics. Washing heavier fabrics in a delicate load can

result in poor wash performance for the heavier fabrics

and possible damage to the delicates.

Lint Type

Some fabrics attract and bind lint to them while others

give o lint in the laundry process. Avoid mixing these

lint collectors and lint producers in the same load. Mixing

these fabrics will result in pilling and linting on the lint

collectors. (For example, lint collector – knit sweater; lint

producer – terrycloth towels.)

Loading the Washer

• Check all pockets to make sure that they are empty.

Items such as clips, matches, pens, coins, and keys can damage both

your washer and your clothes.

• Close zippers, hooks, and drawstrings to prevent these items from

snagging or tangling on other clothes.

• Pretreat heavily stained areas for best results.

• Combine large and small items in a load. Load large items rst.

• Large items should not be more than half of the total wash load.

• The drum should not be tightly packed with items. The door of

the washer should close easily.

• To prevent an out-of-balance load, do not wash single items. Add

one or two similar items to the load.

Large, bulky items, such as a blanket, comforter, or bedspread,

should be washed individually.

• Do not wash or spin waterproof items, such as rain coats, sleeping

bags, etc.

• When unloading the washer, check under the door seal for small

items.

NOTE:

Make sure that the door seal area is clear when closing the

door. Overloading the washer can cause items to get caught

between the door and the seal. This can damage both the items and

the seal.

• DO NOT OVERLOAD THE DRUM

• MAKE SURE CLOTHING IS NOT

CAUGHT IN THE DOOR GASKET

Sort Laundry...

by Colors by Soil by Fabric by Lint

Whites

Lights

Darks

Heavy

Normal

Light

Delicates

Easy Care

Sturdy

Lint Producer

Lint Collector

• For b

est performance, load clothes as shown.

1

3

2

4

- Load clothes loosely, and do not overll the drum.

Clothes need room to circulate in order to get clean.

- Do not press down on items while stacking them in the

drum.

SORTING WASH LOADS

HOW TO USE

17

The automatic dispenser consists of four compartments

which hold:

• Liquid chlorine bleach.

• Liquid fabric softener.

• Liquid or powdered detergent for prewash.

• Liquid or powdered detergent and color-safe bleach

for main wash.

Pre-Wash Detergent Compartment

Add liquid or powdered detergent to this compartment

when using the Pre-Wash option. Always use High-

Eciency (HE) detergent with your washing machine.

The amount of detergent added for the Pre-Wash

option should be ½ the amount recommended for the

main wash cycle. For example, if the main wash cycle

requires ½ measure of detergent, add ¼ measure to the

Pre-Wash compartment.

NOTE:

If using liquid detergent for the main wash when

using the Pre-Wash option, the liquid detergent cup

accessory must be used in the main wash dispenser. This

will prevent the main wash liquid detergent from being

dispensed immediately.

Main Wash Detergent Compartment

This compartment holds laundry detergent for the main

wash cycle. The detergent is added to the load at the

beginning of the cycle. Always use High-Eciency (HE)

detergent with your washing machine. Either powdered

or liquid detergent may be used.

Never

exceed the manufacturer’s recommendations

when adding detergent. Using too much detergent can

result in detergent buildup in clothing and the washer.

NOTE:

Liquid or powdered color-safe bleach may be

added to the main wash compartment with detergent of

the same type. DO NOT add liquid or powdered

color-safe bleach to the bleach dispenser. DO NOT mix

liquid and powdered cleaning agents within the same

compartment.

Liquid Chlorine

Bleach

Compartment

Liquid Fabric

Softener

Compartment

Liquid

Detergent

Cup

Prewash

Detergent

Compartment

Main Wash

Detergent

Compartment

Liquid Bleach Compartment

This compartment holds liquid chlorine bleach, which is

dispensed automatically at the proper time during the

wash cycle.

• Do not add powdered or liquid color-safe bleach to

this compartment. The bleach compartment is designed

to dispense liquid chlorine bleach only. Powdered or

liquid color-safe bleach will not dispense properly.

• Always follow the manufacturer’s recommendations

when adding bleach. Do not exceed the maximum ll

line since this can cause the bleach to be dispensed

immediately, causing damage to fabrics. Using too

much bleach can damage fabrics.

• Never pour undiluted liquid chlorine bleach directly

onto the load or into the drum. Fabric damage can

occur.

Fabric Softener Compartment

This compartment holds liquid fabric softener, which is

automatically dispensed during the nal rinse cycle.

Never exceed the manufacturer’s recommendations when

adding softener. Using too much fabric softener can result

in buildup in clothing and the washer. Either powdered or

liquid fabric softener may be used.

• Always follow the manufacturer’s recommendations

when adding fabric softener. Do not exceed the

maximum ll line. Using too much fabric softener may

stain clothes.

• Dilute concentrated fabric softeners with warm water.

Do not exceed the maximum ll line.

• Never pour fabric softener directly onto the load or

into the drum.

ABOUT THE DISPENSER DRAWER

HOW TO USE

18

DETERGENT AND DISPENSER USE

HOW TO USE

A Word About Detergents

High-Eciency (HE) detergents produce fewer suds,

dissolve more eciently to improve washing and rinsing

performance, and help to keep the interior of your

washer clean. Using detergent that is not HE may cause

oversudsing and unsatisfactory performance which

could result in error codes, cycle failure, and

machine damage.

Liquid

Detergent

Powdered

Detergent

Normal Load Amount

Maximum

For proper wash performance, always measure the

detergent using the measurements provided by the

detergent manufacturer.

The normal amount of HE detergent needed, for average

loads, is less than ½ of the recommended maximum.

Use less detergent

for soft water, light soil or smaller

loads.

Never

use more than the maximum amount

recommended by the detergent manufacturer.

Designed to use only

High-Eciency (HE) detergent

IMPORTANT:

Your washing machine is designed for

use with only High-Eciency (HE) detergents. HE

detergents are formulated specically for front-load

washers and contain suds-reducing agents. Always

look for the HE symbol when purchasing detergent.

IMPORTANT:

Not all detergents are the same. Pay

careful attention to the amount of detergent used to

avoid oversudsing, poor rinsing and detergent buildup in

clothing, and residue buildup that can contribute to odors

in the machine. NEVER use a cup or scoop other than the

one supplied by the manufacturer of the detergent you

are using. Never use more than the maximum amount of

detergent recommended by the manufacturer.

Always measure the detergent amount. While HE

detergents are designed for this type of washing

machine, be careful when measuring the detergent. For

most normal loads, no more than ¼ to ½ of cap or

scoop of HE detergent should be used.

NOTE:

Extra care must be exercised when using

2X

and

3X

concentrated detergents because even a little bit extra

can contribute to the problems mentioned above.

NOTE:

Detergents designated as HE compatible may not

provide optimal results.

Filling the Dispenser

To add detergent, bleach, and fabric softener to the

automatic dispenser:

1

Open the dispenser drawer.

2

Load the laundry products into the appropriate

compartments.

3

Close the drawer before starting the cycle.

NOTE:

It is normal for a small amount of water to

remain in the bleach and softener compartments at the

end of the cycle.

IMPORTANT:

Do not place or store laundry products,

such as detergent, bleach, or liquid fabric softener, on top

of your washer or dryer. Wipe up any spills immediately.

These products can damage the nish and controls.

19

TIME AND STATUS DISPLAY

HOW TO USE

A

ESTIMATED TIME REMAINING

When the START/PAUSE button is pressed, the

washer will automatically detect the load size for

cycles that use load sensing. The control will then

optimize the wash and rinse times, based on the

selected cycle, modiers and options. When the load

size has been determined, the display will change

from dashes (- - -) to the estimated time for that

cycle. For non-load sensing cycles, the estimated

time will display when the cycle is selected.

NOTE:

• The time shown is only an estimate. For example,

the time displayed may pause for a period of time

while the machine is heating the water or balancing

the load. Under certain conditions, the machine can

pause for extended periods of time.

• Estimated time is based on normal operating

conditions. Several external factors (load size, room

temperature, incoming water temperature, etc.) also

aect the length of estimated time vs. actual time.

B

LOAD-SENSING INDICATOR

At the beginning of cycles that use the load sensing

feature, the LOAD SENSING light will blink while the

load size is being measured. Once the size has been

determined, the control adjusts the cycle for

optimum performance. Estimated time remaining will

not display until the load size has been determined,

and may be dierent for each load.

C

CYCLE STATUS INDICATOR

These status LEDs illuminate to indicate which

stage of the cycle is currently running. A blinking

light indicates the active stage of the cycle. When

that stage is complete, the light will remain steady.

D

DOOR LOCK INDICATOR

Indicates that the door is locked. The washer door

will lock while the washer is operating. The door can

be unlocked by pressing START/PAUSE to pause the

washer.

NOTE:

• If the temperature in the washer is too high, the

door cannot be unlocked until the washer

has cooled.

• If the water level is too high, the door will not

unlock. To drain the water, press POWER, then press

the SPIN SPEED button without selecting a cycle.

Press START/PAUSE and the water will drain and

the clothes will spin out. Do not try to force the

door open, as this will damage the door.

The time and status display shows the estimated time remaining, cycle progress, and door lock status.

B

A

C

D

20

CYCLE MODIFIER BUTTONS

HOW TO USE

Each cycle has default settings that are selected

automatically. You may also customize these settings

using the cycle modier buttons. Press the button for the

desired modier until the indicator light for the desired

value is lit. The washer automatically adjusts the water

level for the type and size of wash load for best results

and maximum eciency. Due to the high-eciency

nature of this product, water levels may be much lower

than expected. This is normal operation and cleaning/

rinsing performance will not be compromised.

NOTE:

To protect your garments, not every wash

temperature, spin speed, soil level, or option is available

with every cycle. A chime will sound and the LED will not

light if a selection is not allowed.

A

WASH TEMP

Wash Temp selects the wash and rinse temperature

combination for the selected cycle. Press the Wash

Temp button until the indicator light for the desired

setting is lit.

• Your washer features a heating element to boost

the hot water temperature for Extra Hot settings.

This provides improved wash performance at

normal water heater settings.

• Select the water temperature suitable for the type

of load you are washing. Follow the garment fabric

care labels for best results.

• Cold rinses use less energy. The actual rinse

temperature depends on the temperature of the

cold water at the faucet.

• Cold water is used for all rinse cycles.

B

SPIN SPEED

Higher spin speeds extract more water from clothes,

reducing drying time and saving energy.

Press the SPIN SPEED button until the desired speed

is selected. Some fabrics, such as delicates, require

a slower spin speed. To protect your clothing, not all

spin speeds are available for all cycles.

The Drain & Spin cycle:

1.

Press the POWER button to turn ON the washer.

2.

Press the SPIN SPEED button to select the desired

spin speed. For drain only, select the

NO SPIN option.

3.

Press the START/PAUSE button. The water will

drain and the clothes will tumble before

the spin routine begins.

C

SOIL LEVEL

Adjusting the soil level setting will modify the cycle

to allow more time for heavily soiled clothes or less

time for lightly soiled clothes. Press the SOIL LEVEL

button until the desired soil level is selected.

D

CHIME

Press repeatedly to adjust the volume of the chime

and keypad tones. You may turn the end-of-cycle

chime and keypad tones ON or OFF with the CHIME

button.

A

B

C D

La page est en cours de chargement...

LG 41683 Le manuel du propriétaire

LG 41683 Le manuel du propriétaire

dans d''autres langues

Documents connexes

Autres documents