Wireless Seismic YZO-00105 Manuel utilisateur

RT System 2

Deployment Guide

April 15, 2014

Part Number: 90-0069

R01.i

To order additional copies of this document, send an email to your sales representative requesting the

following:

iPart Number: 90-0069-PDF

iPart Number: 90-0069-Paper

Real Time Matters

Corporate Headquarters: 13100 Southwest Freeway, Suite 150 x Sugar Land, TX 77478 USA x 832-532-5080

Regional Office: 1172 West Century Drive, Suite 200 x Louisville, CO 80027 USA x 720-242-9916

[email protected] x www.wirelessseismic.com

All other brands, company names, product names, trademarks or service marks referenced in this material are the

property of their respective owners, who may or may not be affiliated with, connected to, or sponsored by Wireless

Seismic, Inc.

Wireless Seismic, Inc.'s trademarks, registered trademarks or trade dress may not be used in connection with any

product or service that is not the property of Wireless Seismic, Inc., in any manner that is likely to cause confusion

among customers, or in any manner that disparages or discredits Wireless Seismic, Inc. The products and services

described in this material may not be available in all regions.

All information supplied in this document regarding weights, sizes, performance, functionality and other technical

information of any kind is approximate and shall be taken as generally representing our products. We may modify our

products, discontinue products or add new products at any time and without providing an update to this document.

NOTHING CONTAINED IN THIS DOCUMENT SHALL BE CONSIDERED A REPRESENTATION OR WARRANTY MADE BY

WIRELESS SEISMIC, INC. (“WIRELESS SEISMIC”) CONCERNING ANY PRODUCT DESCRIBED HEREIN, OR OTHERWISE.

EXCEPT FOR THE WARRANTIES THAT MAY BE PROVIDED IN A SEPARATE AGREEMENT BETWEEN YOU AND WIRELESS

SEISMIC, WIRELESS SEISMIC MAKES NO REPRESENTATION OR WARRANTY OF ANY KIND AND NO WARRANTY,

CONDITION OR REPRESENTATION, WHETHER EXPRESS, IMPLIED, ORAL OR STATUTORY, IS PROVIDED TO YOU OR

ANY THIRD PARTY. WITHOUT LIMITING THE FOREGOING, WIRELESS SEISMIC EXPRESS EXCLUDES AND DISCLAIMS

ANY WARRANTY, CONDITION OR REPRESENTATION: (1) OF MERCHANTABILITY, FITNESS FOR A PARTICULAR

PURPOSE, TITLE, SATISFACTORY QUALITY, OR ARISING FROM A COURSE OF DEALING, USAGE, OR TRADE PRACTICE;

(2) THAT ANY PRODUCTS (INCLUDING SOFTWARE) WILL BE FREE FROM INFRINGEMENT OR VIOLATION OF ANY

RIGHTS, INCLUDING INTELLECTUAL PROPERTY RIGHTS, OF THIRD PARTIES; OR (3) THAT THE OPERATION OF ANY

PRODUCT (INCLUDING SOFTWARE) WILL BE UNINTERRUPTED OR ERROR FREE. THIS DISCLAIMER AND EXCLUSION

SHALL APPLY EVEN IF THE EXPRESS WARRANTIES HEREIN FAIL OF THEIR ESSENTIAL PURPOSE.

RT System 2 v2.3 3 Deployment Guide R01.i

Table of Contents

1.1. Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

1.1 About this Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

1.2 Who Should Use this Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

1.3 Related Documents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

1.4 Getting Help . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

2.2. Layout. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

2.1 Prerequisites . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

2.2 Getting Ready . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

2.3 Preparing the Equipment. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

2.4 Laying Out the Equipment. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

2.4.1 Prerequisites . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

2.4.2 Assembling the Ground Equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

2.4.3 Placing the WRU in the Field. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

2.4.4 Placing the LIU in the Field. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

2.5 WRU Anchor Plate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

3.3. Backhaul . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

3.1 Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

3.2 Backhaul Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

3.2.1 LIU . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

3.2.2 LIU Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

3.2.3 LIU and WRU Antennas . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

3.2.4 Line Radios . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

3.2.5 Recorder Radio. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42

3.2.6 Radio Antennas . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44

3.2.7 Surge Protector Box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44

3.2.8 Cable Assemblies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45

3.2.9 Mast and Base . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49

3.2.9.1 Telescoping Mast. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49

3.2.9.2 Base . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49

3.3 Setting up the Backhaul . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50

4.4. Point-to-Point Backhaul . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65

4.1 Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65

4.2 Preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70

4.3 Create Plan and Map . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76

4.4 Install and Troubleshoot . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77

4.5 Final Communication Test . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80

4.6 Rolling the Backhaul. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86

4.7 Replacing a Radio. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90

4.8 Upload New Firmware. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90

4.9 Unzipping the Configuration Files . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91

4.10 Connecting to the Recording Truck. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92

5.5. Point-to-Multipoint Backhaul . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98

4 RT System 2 v2.3 Deployment Guide R01.i

Table of Contents

5.1 Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .98

5.2 Preparation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .104

5.3 Create Plan and Map . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .111

5.4 Install and Troubleshoot. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .115

5.4.1 Using one Recorder Radio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .117

5.4.2 Using a Redundant Recorder Radio. . . . . . . . . . . . . . . . . . . . . . . . . . .118

5.4.3 Using a Custom Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .119

5.5 Final Communication Test. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .119

5.6 Replacing a Radio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .127

5.7 Upload New Firmware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .128

5.8 Unzipping the Configuration Files. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .128

5.9 Connecting to the Recording Truck . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .129

6.6. Demobilization . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .135

6.1 Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .135

6.2 Removing the WRU from the Field . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .135

6.3 Disassemble the WRU . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .136

7.7. Batteries. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .138

7.1 Lithium Ion Batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .138

7.1.1 Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .138

7.1.2 Handling and Safety Guidelines . . . . . . . . . . . . . . . . . . . . . . . . . . . . .139

7.1.3 Transportation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .140

7.1.4 Storage. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .141

7.2 Charging Lithium Ion Batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .141

7.2.1 Charging Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .141

7.2.2 Battery Charger . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .142

A.A. Legal Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .144

A.1 FCC Rules and Regulations Compliance . . . . . . . . . . . . . . . . . . . . . . . . . . .144

A.2 Industry Canada Compliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .146

A.3 CE Compliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .146

A.4 Australian Compliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .146

B.B. WRU and LIU Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .147

B.1 WRU Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .147

B.2 LIU Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .148

C.C. Radio Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .149

C.1 Antenna Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .149

C.1.1 Bullet Line Station Antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .149

C.1.2 Rocket Recorder Antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .152

C.1.3 NanoStation Recorder/Line Station Antenna . . . . . . . . . . . . . . . . . . . .155

C.2 Radio Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .156

C.2.1 Bullet Line Station Radios . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .157

C.2.2 Rocket Recorder Radios . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .159

C.2.3 NanoStation Recorder/Line Station Radios. . . . . . . . . . . . . . . . . . . . . .160

D.D. LED Indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .163

R01.i RT System 2 v2.3 Deployment Guide 5

Table of Contents

D.1 WRU Undeployed. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 163

D.2 WRU Deploying . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 165

D.3 WRU Deployed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 172

D.4 LIU Power-On . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 175

D.5 LIU Normal Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 176

D.6 Firmware Upgrade . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 180

E.E. Weighted Base . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 182

E.1 Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 182

E.2 Hardware Supplied. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 183

E.3 Assembly Instructions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 183

F.F. Using a Compass . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 184

G.G. Rope Knot. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 188

H.H. Country Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 189

I.I. Français . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 194

I.1 Batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 194

I.1.1 Batteries au lithium-ion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 194

I.1.1.1 Spécifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 194

I.1.1.2 Directives en matière de manipulation et de sécurité . . . . . . . . . . 195

I.1.1.3 Transport . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 196

I.1.1.4 Entreposage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 198

I.1.2 Chargement des batteries au lithium-ion . . . . . . . . . . . . . . . . . . . . . . 198

I.1.2.1 Précautions de chargement . . . . . . . . . . . . . . . . . . . . . . . . . . . . 198

I.1.2.2 Chargeur de batterie . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 199

I.2 l'information juridique . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 200

I.2.1 Conformité avec les règles et règlements de la FCC. . . . . . . . . . . . . . . 200

I.2.2 Industrie Canada Conformité . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 201

I.2.3 Acquiescement de CE. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 202

Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 203

6 RT System 2 v2.3 Deployment Guide R01.i

List of Figures

Figure 2–1 WRU .......................................................................................................... 12

Figure 2–2 WRU with Geophone..................................................................................... 13

Figure 2–3 LIU ............................................................................................................ 14

Figure 2–4 Assembling WRUs........................................................................................ 15

Figure 2–5 Battery Latch .............................................................................................. 17

Figure 2–6 Installing the Battery.................................................................................... 17

Figure 2–7 Installing the Geophone................................................................................ 18

Figure 2–8 Antenna Extender (65-0091)......................................................................... 18

Figure 2–9 Antenna with Spring Relief............................................................................ 19

Figure 2–10 Power on the Unit........................................................................................ 20

Figure 2–11 Place the Unit.............................................................................................. 21

Figure 2–12 Geophone Self-Test Failure ........................................................................... 22

Figure 2–13 Attaching the Anchor Plate to the WRU ........................................................... 23

Figure 2–14 Anchor Plate and WRU Alignment................................................................... 23

Figure 2–15 Anchor Plate at WRU Geophone End............................................................... 24

Figure 2–16 Anchor Plate Bracket.................................................................................... 24

Figure 2–17 Anchor Bracket Screws................................................................................. 24

Figure 2–18 Anchor Plate Attached to WRU....................................................................... 25

Figure 2–19 WRU Anchored with Anchor Plate ................................................................... 25

Figure 3–1 Point-to-Point Single Backhaul Data Direction.................................................. 28

Figure 3–2 Point-to-Point Dual Backhaul Data Direction .................................................... 29

Figure 3–3 Point-to-Multipoint Backhaul Data Direction..................................................... 30

Figure 3–4 Line Station Backhaul Components................................................................. 35

Figure 3–5 Recorder Backhaul Components..................................................................... 36

Figure 3–6 Recorder/Line NanoStation Backhaul Components............................................ 37

Figure 3–7 Line Interface Unit (LIU)............................................................................... 38

Figure 3–8 Line Radio and Antennas, Bullet..................................................................... 40

Figure 3–9 Line Radio, NanoStation................................................................................ 41

Figure 3–10 Bullet Radio Case (70-0138).......................................................................... 41

Figure 3–11 NanoStation Radio Case (70-0176) ................................................................ 42

Figure 3–12 Recorder Radio............................................................................................ 43

Figure 3–13 Surge Protector Connections ......................................................................... 44

Figure 3–14 Cable, LIU to Battery (60-0034) .................................................................... 45

Figure 3–15 Cable, LIU to NanoStation Radio (60-0036)..................................................... 46

Figure 3–16 Cable, LIU-to-PC (60-0039) .......................................................................... 47

Figure 3–17 Cable, Ethernet, 3 ft Shielded (65-0104)......................................................... 47

Figure 3–18 Cable, Armored Ethernet, 10 ft (60-0053)....................................................... 47

Figure 3–19 Cable, RF Extender, 10 ft (65-0103)............................................................... 48

Figure 3–20 Media Converter (60-0017)........................................................................... 48

Figure 3–21 Cable, Backhaul Jumper (60-0033) ................................................................ 48

Figure 3–22 Cable, Fiber Optic, Armored, 250 m (60-0026) ................................................ 49

Figure 3–23 Mast (55-0050) ........................................................................................... 49

Figure 3–24 Base (55-0050)........................................................................................... 50

Figure 4–1 Channel – 80 MHz Wide Frequency Band......................................................... 65

Figure 4–2 Line Station Backhaul................................................................................... 66

Figure 4–3 Radio-to-Radio Communication...................................................................... 68

Figure 4–4 Radio-to-Fiber Communication....................................................................... 69

Figure 4–5 Preparation Troubleshooting Flow................................................................... 70

Figure 4–6 Invalid Country Code Error Message............................................................... 71

Figure 4–7 Ubiquiti NanoStation Private Network Connection............................................. 72

Figure 4–8 Ubiquiti Discovery Tool Icon .......................................................................... 73

Figure 4–9 Ubiquiti Discovery Window............................................................................ 74

Figure 4–10 Ubiquiti airOS Login Window.......................................................................... 74

Figure 4–11 Ubiquiti airOS Window, System Tab................................................................ 75

R01.i RT System 2 v2.3 Deployment Guide 7

List of Figures

Figure 4–12 Ubiquiti, Upload Configuration File ................................................................. 75

Figure 4–13 Ubiquiti, Apply Configuration Changes ............................................................ 76

Figure 4–14 Create Plan and Map Troubleshooting Flow...................................................... 76

Figure 4–15 Maintain Line-of-Sight .................................................................................. 77

Figure 4–16 Install and Troubleshoot the Radios Flow ........................................................ 78

Figure 4–17 Final Communication Test Flow...................................................................... 81

Figure 4–18 Ubiquiti airOS Tools ..................................................................................... 82

Figure 4–19 Speed Test Window ..................................................................................... 83

Figure 4–20 NanoStation Main Tab .................................................................................. 84

Figure 4–21 NanoStation Radio Shielding and Surge Suppressor.......................................... 85

Figure 4–22 Rolling the Poles Example for 18 Total Poles.................................................... 87

Figure 4–23 Rolling Scheme, 18 Total Poles Example ......................................................... 88

Figure 4–24 Rolling Scheme, 18 Pole Backhaul, 10 Poles in Use........................................... 89

Figure 4–25 Radio Configuration, Updating Firmware ......................................................... 91

Figure 4–26 Connecting the Recording Truck with Fiber...................................................... 92

Figure 4–27 Connecting the Recording Truck with a Pendant Radio Link................................ 93

Figure 4–28 Optimal Angle, Radio Link to Recording Truck.................................................. 94

Figure 4–29 Connecting the Pendant Radio Link ................................................................ 95

Figure 4–30 Wireless Tab............................................................................................... 97

Figure 5–1 Channel, 80 MHz Wide Frequency Band .......................................................... 98

Figure 5–2 Line Station Mast (Bullet Radio)..................................................................... 99

Figure 5–3 Recording Truck or Line Station Mast (NanoStation Radio) ...............................100

Figure 5–4 Recording Truck Mast with LIU (Rocket Radio)................................................101

Figure 5–5 Recording Truck Mast without LIU (Rocket Radio) ...........................................102

Figure 5–6 Preparation Troubleshooting Flow .................................................................104

Figure 5–7 Invalid Country Code Error Message..............................................................105

Figure 5–8 Ubiquiti Rocket/Bullet Private Network Connection ..........................................107

Figure 5–9 Ubiquiti Discovery Tool Icon.........................................................................108

Figure 5–10 Ubiquiti Discovery Window...........................................................................109

Figure 5–11 Ubiquiti Login Window.................................................................................109

Figure 5–12 Ubiquiti Rocket/Bullet Window, System Tab....................................................110

Figure 5–13 Upload Configuration File.............................................................................110

Figure 5–14 System Tab, Apply Changes.........................................................................111

Figure 5–15 Create Plan and Map Troubleshooting Flow.....................................................111

Figure 5–16 Maintain Line-of-Sight .................................................................................112

Figure 5–17 Install and Troubleshoot the Radios Flow .......................................................116

Figure 5–18 Final Communication Test Flow.....................................................................120

Figure 5–19 Tools, Speed Test.......................................................................................121

Figure 5–20 Speed Test Window ....................................................................................122

Figure 5–21 Bullet Radio Status Tab ...............................................................................124

Figure 5–22 NanoStation Main Tab .................................................................................125

Figure 5–23 Radio/Antenna Shielding..............................................................................126

Figure 5–24 NanoStation Radio Shielding and Surge Suppressor.........................................127

Figure 5–25 Radio Configuration, Updating Firmware ........................................................128

Figure 5–26 Connecting the Recording Truck with Fiber.....................................................130

Figure 5–27 Connecting the Recording Truck with a Pendant Radio Link...............................131

Figure 5–28 Connecting the Pendant Radio Link ...............................................................132

Figure 5–29 Wireless Tab..............................................................................................134

Figure 6–1 Power Off the Unit ......................................................................................135

Figure 6–2 Undeployed Unit.........................................................................................136

Figure 6–3 Removing the Battery .................................................................................137

Figure 7–1 Example Battery Shipping Label....................................................................140

Figure 7–2 Battery Charger..........................................................................................142

Figure 7–3 Serial Number Label and LED Indicator..........................................................143

Figure A–1 CE Mark ....................................................................................................146

Figure C–1 19 dBi Antenna (65-0177) ...........................................................................149

Figure C–2 6 dBi Antenna (65-0179).............................................................................150

Figure C–3 13 dBi Antenna (65-0178) ...........................................................................153

Figure D–1 WRU Down-Tilt Action .................................................................................163

8 RT System 2 v2.3 Deployment Guide R01.i

List of Figures

Figure D–2 WRU Up-Tilt Action .................................................................................... 163

Figure E–1 Weighted Mast .......................................................................................... 182

Figure E–2 Tripod Assembly, Front View ....................................................................... 183

Figure F–1 Sighting Compass (70-0067)....................................................................... 184

Figure F–2 Declination Indication on Map...................................................................... 185

Figure F–3 Compass and Map...................................................................................... 186

Figure F–4 Compass Adjusted for Declination ................................................................ 187

Figure F–5 Compass Adjusted for Declination ................................................................ 187

Figure G–1 Tying the Taut-line Hitch Knot ..................................................................... 188

R01.i RT System 2 v2.3 Deployment Guide 9

List of Tables

Table 3–1 Backhaul Communication Concepts ................................................................ 26

Table 3–2 Backhaul Components, LIU, Mast, and Fiber.................................................... 31

Table 3–3 Backhaul Components, Radios....................................................................... 32

Table 3–4 Antenna Specifications, WRU/LIU................................................................... 39

Table 3–5 Antenna Specifications, Radios ...................................................................... 44

Table 3–6 Cable Pinout, LIU to Battery (60-0034)........................................................... 45

Table 3–7 Cable Pinout, to NanoStation Radio(60-0036).................................................. 46

Table 3–8 Cable Pinout, LIU-to-PC (60-0039)................................................................. 47

Table 3–9 Cable Pinout, Backhaul Jumper (60-0033)....................................................... 48

Table 3–10 How to Set Up the Backhaul.......................................................................... 50

Table 4–1 Label Nomenclature ..................................................................................... 67

Table 4–2 Ethernet Cable Connections Comparison......................................................... 80

Table 4–3 Pendant Radio Link Elements......................................................................... 96

Table 5–1 Supported Backhaul Radios..........................................................................105

Table 5–2 Example File Names....................................................................................106

Table 5–3 Creating a Google Earth Elevation Profile .......................................................113

Table 5–4 Ethernet Cable Connections Comparison........................................................118

Table 5–5 Pendant Radio Link Elements........................................................................133

Table 7–1 Lithium Ion Battery Specifications.................................................................138

Table A–1 Antenna Specifications ................................................................................145

Table B–1 WRU Specifications .....................................................................................147

Table B–2 LIU Specifications.......................................................................................148

Table C–1 Antenna Specifications, 6 dBi (65-0179)........................................................150

Table C–2 Antenna Specifications, 13 dBi (65-0177) ......................................................151

Table C–3 Antenna Wind Loading, 13 dBi (65-0177).......................................................152

Table C–4 Antenna Specifications, 13 dBi (65-0178) ......................................................153

Table C–5 NanoStation Integrated Antenna Specifications...............................................155

Table C–6 Bullet Line Station Radio Specifications (56-0019 US, 56-0024 Intl) ..................157

Table C–7 Bullet Line Station Radio Power Specifications (56-0019 US, 56-0024 Intl).........158

Table C–8 Rocket Recorder Radio Specifications (15-0052 US, 15-0054 Intl).....................159

Table C–9 Rocket Recorder Radio Power Specifications (15-0052 US, 15-0054 Intl)............160

Table C–10 NanoStation Radio Specifications (56-0035 US, 56-0032 Intl)...........................160

Table C–11 NanoStation Radio Power Specifications (56-0035 US, 56-0032 Intl) .................161

Table D–1 WRU LED Indications, Undeployed ................................................................164

Table D–2 WRU LED Indications, Undeployed Power-On Sequence....................................165

Table D–3 WRU LED Indications, Deploying Sequence.....................................................166

Table D–4 WRU LED Indications, Deploying Power-On Sequence......................................171

Table D–5 WRU LED Indications, Deployed WRU, No Geophone Tilt ..................................172

Table D–6 WRU LED Indications, Deployed WRU, Geophone Down Tilt ..............................173

Table D–7 WRU LED Indications, Deployed WRU, Geophone Up Tilt ..................................174

Table D–8 LIU LED Indications, Power-On Sequence.......................................................175

Table D–9 LIU LED Status Indications, Normal Mode ......................................................177

Table D–10 LIU LED Error Indications, Normal Mode ........................................................179

Table D–11 WRU and LIU LED Status Indications, Firmware Upgrade..................................180

Table H–1 ISO 3166 Country Codes .............................................................................189

RT System 2 v2.3 10 Deployment Guide R01.i

1

1. Overview

1.1 About this Guide

This document provides information on how to deploy the RT System 2 in the field. See

the RT System 2 Installation Guide for instructions on setting up the recording truck

equipment and software.

1.2 Who Should Use this Guide

The expected users of this document are as follows:

iCrew (Layout/Troubleshooters)

iTechnician (LIU)

iBosses (Line Crew)

1.3 Related Documents

RT System 2-related documents are as follows:

iRT System 2 Documents Guide (90-0026) – Lists all of the RT System 2

documents with a brief description of each.

iRT System 2 Glossary (90-0032) – Lists and defines RT System 2 terms and

acronyms. Includes some general seismic and geologic terms and acronyms.

iRT System 2 Installation Guide (90-0028) – Provides instructions for setting up

the recording truck hardware, and installing and updating software and firmware.

iRT System 2 Troubleshooting Guide (90-0039) – Provides instructions on how to

solve common problems.

1.4 Getting Help

To get help on the RT System 2 Central Recording System, consult the online help. You

can find the help documents by clicking the help icon in the user interface, or by

navigating to the following directory:

C:\wsi\rt\vx.y.z\server\help\index.htm

Where vx.y.z is the version number (for example, v2.3).

To get help on the RT System 2 deployment, consult this document.

If you cannot find the answers you need, please contact Wireless Seismic, Inc. Customer

Support at:

13100 Southwest Freeway, Suite 150

Sugar Land, TX 77478

(832) 532-5048

[email protected]

RT System 2 v2.3 11 Deployment Guide R01.i

2

2. Layout

This chapter describes how to prepare (mobilization) and layout (install) the ground

electronics. See the RT System 2 Installation Guide for instructions on setting up the

recording truck equipment and software.

2.1 Prerequisites

In preparation for mobilization, define the following:

iSurvey

iBackhaul plan

2.2 Getting Ready

Collect all of the following:

RT System 2 ground equipment (05-0007):

iWRUs (01-0001, 10-0017, 10-0023, 10-0027)

iLIUs (10-0016) (see also “Backhaul Components” on page 31)

iAntennas 5.5 dBi maximum (65-0204/65-0264)

iGeophones

iWRU Batteries (0400-001-01)

iWRU Dummy Batteries (55-0009)

iWRU Anchor Plates (10-0028)

iAntenna Extenders

Ɣ30 in (762 mm) antenna extender (65-00941) (standard)

Ɣ10 ft (3 m) M-to-F coax cable (65-0103)

Ɣ25 ft (7.6 m) M-to-F coax cable (65-0110)

iBackhaul Components (see “Backhaul Components” on page 31)

iTools

iManuals

iConsumables

iSpares (15-0003)

ƔMast Parts

ƔBase Parts

ƔGuy Lines

ƔAntennas

ƔAntenna Extenders

ƔBatteries

NOTE Please refer to “Antenna Specifications” on page 145 for the list of supported

antennas. Use of accessories other than those specified in this document is not

supported or warrantied.

12 RT System 2 v2.3 Deployment Guide R01.i

2. Layout

Preparing the Equipment

ƔCables

ƔConnectors

2.3 Preparing the Equipment

Ensure that the Central Recording System has the latest available software installed. Ensure

that the ground equipment has the latest available firmware installed. See the following for

more information:

iSee the RT System 2 Release Notes for version numbers.

iSee the RT System 2 Installation Guide for installation and update instructions.

Ensure that the industry standard best practices are followed for securing the equipment for

transport.

2.4 Laying Out the Equipment

Lay out the ground equipment while the central recording system hardware and software is

being prepared to save time.

The WRU is shown in the following figure:

NOTE The batteries (when fully discharged) require 8 hours of continuous charging in

the battery charger connected to an AC source; therefore, the battery charger

should be located at the staging area or in town.

Figure 2–1 WRU

R01.i RT System 2 v2.3 Deployment Guide 13

2. Layout

Laying Out the Equipment

A WRU with a geophone attached is shown in the following figure

Figure 2–2 WRU with Geophone

14 RT System 2 v2.3 Deployment Guide R01.i

2. Layout

Laying Out the Equipment

The LIU is shown in the following figure:

2.4.1 Prerequisites

Attach the batteries, antennas, anchor plates, and geophones to the ground equipment prior

to going into the field, or as each unit is placed. If you are assembling as you place the units,

ensure that you have sufficient quantities for each unit, plus a few spares.

Figure 2–3 LIU

NOTE Do not deploy (tip to power on) the WRUs until they are at the actual location

where they will be placed.

R01.i RT System 2 v2.3 Deployment Guide 15

2. Layout

Laying Out the Equipment

The RT System 2 shall be used with only the supplied antennas (Table A–1 Antenna

Specifications, on page 145) attached to the WRU with an integrated type N male (threaded

or HPQN) connector.

iThe RT System 2 antennas shall be installed and handled by professionals specifically

designated for this purpose.

iChanges or modifications not expressly approved by Wireless Seismic, Inc. can void the

users’s authority to operate the equipment.

Figure 2–4 Assembling WRUs

CAUTION

In order to comply with radio frequency (RF) exposure requirements,

the RT System 2 units must be installed so that a minimum separation

distance of 20 cm is maintained between the antenna(s) and the body

of all persons at all times during normal operation.

PRUDENCE

Afin de se conformer aux normes de la en matière d'exposition aux

radiofréquences (RF), les unités RT System 2 doivent être installées de

manière à garder en permanence une distance minimale de 20 cm entre

la ou les antennes et le corps de toute personne en mode de

fonctionnement normal.

16 RT System 2 v2.3 Deployment Guide R01.i

2. Layout

Laying Out the Equipment

2.4.2 Assembling the Ground Equipment

This section describes the process to assemble the ground equipment prior to deployment.

To assemble the ground equipment:

1Gather the equipment:

ƔWRU

ƔAntenna

ƔAntenna Extender

ƔGeophone

ƔBatteries

ƔAnchor plates

2Gather any special tools and equipment:

ƔOptional: Nylon grip pliers

ƔOptional: Loctite® 222

ƔSafety gear such as vests, hard hat, and gloves.

3Attach one or more batteries to the WRU.

ƔPress the battery into the connector.

ƔFlip the bail over the molded area on the end of the battery.

ƔPress the lever until the catch snaps to lock it in place.

VORSICHT

Um den Radiofrequenz-Strahlen-belastungsrichtlinien zu entsprechen,

müssen die RT-System 2 Einheiten so eingebaut werden, dass ein

Mindestabstand von 20 cm zwischen der/n Antenne/n und dem/n

Körper/n aller Personen zu jeglicher Zeit während der üblichen

Betriebszeiten gewährleistet ist.

PRZESTROGA

Aby zachowaü zgodnoĞü z wymogami dotyczącymi ekspozycji na

promieniowanie o czĊstotliwoĞci radiowej (RF), urządzenia RT System 2

naleĪy instalowaü tak, aby podczas normalnej obsáugi pomiĊdzy ciaáem

wszystkich osób a antenami przez caáy czas byáo co najmniej 20 cm

odstĊpu.

CAUTION

The metal ground equipment can become hot while exposed to the sun.

Wear gloves to handle hot equipment.

PRUDENCE

Les équipements terrestres en métal peuvent devenir chauds lorsqu’ils

sont exposés au soleil. Portez des gants lorsque vous manipulez un

équipement chaud.

VORSICHT

Die Metallbodenausrüstung kann heiß werden, wenn sie der

Sonneneinstrahlung ausgesetzt wird. Tragen Sie Handschuhe, wenn Sie

mit erhitzter Ausrüstung umgehen.

PRZESTROGA

Metalowe elementy urządzeĔ w terenie mogą nagrzaü siĊ w przypadku

wystawienia na sáoĔce. Nagrzane urządzenia naleĪy obsáugiwaü

w rĊkawicach.

R01.i RT System 2 v2.3 Deployment Guide 17

2. Layout

Laying Out the Equipment

4Optional: Attach the anchor plate. See “WRU Anchor Plate” on page 22 for instructions.

5Attach the geophone to the WRU.

Figure 2–5 Battery Latch

Figure 2–6 Installing the Battery

TIP To record three components of seismic data with the multiple-channel WRU,

connect three separate arrays of one-component geophones to the same WRU,

or connect a multiple-component geophone to the WRU

18 RT System 2 v2.3 Deployment Guide R01.i

2. Layout

Laying Out the Equipment

6Attach the antenna with extender to the WRU. Ensure that the antenna connection is

clean, and the antenna is snug and does not wobble.

Figure 2–7 Installing the

Geophone

NOTE The antenna screws on to the WRU in a clockwise direction. It should twist on

easily; do not use force. To ensure that the threads are properly aligned, turn

the connector counter-clockwise until you hear a click indicating that the threads

are aligned, then turn clockwise to tighten.

Figure 2–8 Antenna Extender (65-0091)

R01.i RT System 2 v2.3 Deployment Guide 19

2. Layout

Laying Out the Equipment

2.4.3 Placing the WRU in the Field

This section describes the process to ready the ground equipment for interaction with the

central recording system (deployment).

To deploy the WRU:

1Prerequisites:

ƔThe WRU is assembled with battery, geophone, and antenna

ƔOptional: The anchor plate is attached to the WRU

2Pick up the WRU and point the geophone connector end towards the ground as shown in

the following figure. After a few seconds, all of the LEDs illuminate:

Figure 2–9 Antenna with Spring Relief

NOTE Do not deploy (tip to power on) the WRUs until they are at the actual location

where they will be placed.

NOTE When using a WRU as a Repeater, the deployment instructions are the same,

except a geophone is not required. Repeaters are added to the line segment in

the Spread Manager. See the RT System 2 Operator Guide for more information.

If a geophone is not connected, you can skip the geophone test. See “D. LED

Indicators” on page 163 for more information on skipping the test and the

relevant LED status indicators.

20 RT System 2 v2.3 Deployment Guide R01.i

2. Layout

Laying Out the Equipment

3Place the unit flat on the ground as shown in the following figure:

Figure 2–10 Power on the Unit

La page charge ...

Wireless Seismic YZO-00105 Manuel utilisateur

Ce manuel convient également à

Wireless Seismic YZO-00105 Manuel utilisateur

dans d''autres langues

Autres documents