Turtle Beach Ear Force X42 Manuel utilisateur

Marque: Turtle Beach

Modèle: Ear Force X42

Catégorie: Casques

Taper: Manuel utilisateur

Ce manuel convient également à

TB521-2270-01

dual band wireless

WiFi

GHz

User Guide

What’s in the Box

X42 Headset with

Removable Microphone

X42 Wireless Digital

RF Transmitter

(2) AAA Batteries

Digital Optical Cable

Xbox 360

Talkback Cable

Turtle Beach Sticker

product support and warranty information:

www.TurtleBeach.com/support

X42 Headset pg 1

X42 Transmitter

Overview pg 2

Using the Transmitter pg 3

Pairing the Headset and Transmitter pg 4

Setup

Xbox 360

pg 5

Home Theater pg 10

Digital Music Players pg 11

Dolby

Digital Processing pg 12

Surround Sound Angles pg 13

Effects (EQ) Presets pg 14

Chat Boost

™

pg 14

Technical Speciﬁcations pg 15

Troubleshooting pg 16

Important Safety Information pg 16

Table of Contents

X42 Headset

ON - - OFFBASS BOOST

POWER

EFFECTS

Power Button: To turn on the headset, press and

hold the power button for a couple of seconds, then

release. You will hear 2 beeps and the power LED

should start ﬂashing. Turn off the headset by pressing

the button until the LED stays on and you hear 2 beeps,

then release. To enter Pairing Mode, power off the

headset, then press and hold the power button for

about 6 seconds until you hear the second double

beep and the LED begins to ﬂash rapidly (see pg 4).

The headset will turn off after several minutes if there’s

no audio detected or if the transmitter is turned off.

Xbox Controller Jack: Insert the straight connector on

the Talkback Cable here. (see pg. 8)

Effects Button: Press this button to activate the

different EQ presets. A beep will indicate which

preset is selected. (see pg. 14)

Game Volume: Turn to adjust the game sound level.

The Xbox LIVE chat volume may be independently set

by the volume control on the Talkback Cable.

Power LED: Flashes about once per second when

power is on. Flashes quickly (twice per second) when

in Pairing Mode (see pg. 4).

Microphone jack: Insert the removable mic boom

here. The jack is notched to prevent the boom from

rotating after insertion.

To properly position the mic: To properly position the

mic: Remove the foam cover, then insert the boom into

the jack so the holes on the mic casing are facing your

mouth. Then replace the foam cover. The boom plug

also has a marker to indicate the proper mic position.

1 2 3 4

SURROUND

ANGLES

SURROUND

ON/ OFF

PAIR

X42 Transmitter

Digital Input LED: This LED turns on when a digital input signal is

detected. When this LED is ON, the analog input is turned off.

Surround Sound LED: The LED will light whenever the digital input is

being processed by the surround sound decoder.

Dolby Digital LED: The LED will light whenever a Dolby Digital

encoded signal is detected on the digital input.

Power/Link LED: The LED is on solid when the transmitter is

communicating with the headset. A slowly pulsing LED indicates

that the transmitter can’t communicate with the headset. This could

happen when the headset is turned off, out of range or not paired with

the transmitter. (see pgs. 3-4)

Digital Input and Output: Connect the digital input to the Xbox 360

digital output using the included digital optical cable. The digital input

is passed through to the digital output so you can connect the X42

transmitter and your home theater system to hear the Xbox sound on

the headset and speakers at the same time. When a digital signal is

detected by the optical input, the Digital Input LED will be lit.

Analog Input Jack: Provides a 3.5 mm input for digital music players

or additional audio sources. (3.5 mm cable sold separately)

NOTE: The analog input is deactivated whenever a digital input is active, so

both the digital and analog inputs cannot be used at the same time.

Pair Button: Press and hold to activate pairing mode. (See pg. 4)

Surround Sound Angles Button: Press to select different HRTF

surround angles. (See pg. 13)

Surround Sound On/Off Button: Pressing this button toggles between

surround sound and stereo sound. When surround sound is active,

the Surround Sound LED will be lit.

Basic Stereo Mode: Downmixes the audio to stereo and disables all

audio effects. To enter Basic Stereo Mode, press and hold Surround

ON/OFF + Speaker Angles while powering on the transmitter.

1 2 3 4

7 8 9

Using the Transmitter

Transmitter Range

The transmitter sends game audio from your Xbox 360

to the headset via digital radio frequency (RF) signal, so a direct line of sight is not

required. When you’re out of range, you may hear popping or clicking sounds if the headset loses the RF signal. For best performance,

place the transmitter in an open area that is unobstructed by objects that might absorb RF signals from the internal antenna. Avoid placing

it on a metal surface, such as the top of a home theater A/V receiver.

Range up to 30 ft.

Dual-Band WiFi

The X42 uses advanced “Dual-Band WiFi” radio technology to help eliminate interference with additional wireless devices and WiFi

networks. The Dual-Band radio uses either 5 GHz and 2.4 GHz signals to transmit high ﬁdelity digital audio and help eliminate interference

with other wireless devices. Unlike the RF technology used in most other wireless headsets, this Dual-Band WiFi radio technology coexists

with wireless networks for optimum performance.

dual band wireless

WiFi

GHz

SURROUND

ANGLES

SURROUND

ON/ OFF

PAIR

Pairing the Headset and Transmitter

The headset and transmitter in this package are “paired”, which means they’re synchronized to ensure they work together. When the

headset and transmitter are communicating, the POWER LED on the front panel of the transmitter will be on solid. If this LED is instead

pulsing slowly, it means the transmitter can’t communicate with the headset. This could happen if the headset is turned off or out of

range. If the LED is pulsing slowly when the headset is on and within range, then they might need to be “paired”

as described below.

The headset and transmitter are paired out of the box, so the following instructions are necessary only if pairing appears to have been lost.

ON - - OFFBASS BOOST

POWER

EFFECTS

2 feet

Maintain a distance of at least

2 feet between the headset and

transmitter when pairing.

1. Make sure the headset and transmitter are turned off and

they are at least 2 feet away from each other.

2. Power on the transmitter by connecting it to a free USB

port on your gaming console. Then press and hold the

PAIR button on the transmitter for about 5 seconds.

Release the PAIR button when the transmitter’s Power/

Link LED begins to ﬂash rapidly (twice per second). NOTE:

If you hold the transmitter’s PAIR button for too long (over

20 seconds), the light will blink extremely quickly, and you

will need to start over from step 1.

3. Press and hold the headset Power button for about 6

seconds until you hear the second double beep, then

release the Power button. At this point, the headset LED

will ﬂash rapidly (twice per second).

4. Wait for the headset and transmitter to pair. This process

could take up to 30 seconds.

If pairing is successful, the Power/Link LED on the

transmitter should be on solid and the headset LED should

be ﬂashing about once per second, indicating that the units

are paired.

If pairing fails, repeat steps 1-4. It may take up to 5 attempts

to pair successfully.

NOTE: Only one headset can be paired with the transmitter. If you pair two headsets with the same transmitter, they’ll interfere with

each other as they compete for the transmitter RF signal. This will cause one headset to shut off. So don’t try to pair two headsets

with the same transmitter!

Xbox 360

Setup

1. Connect the Digital Optical Cable

NOTE: Remove the protective caps from each end of the

optical cable before inserting it into the jacks.

2. Connect the Transmitter Power

Xbox 360 (Newer Models)

Xbox 360 (Older Models)*

1. Connect the Digital Optical Cable*

(Requires Xbox 360 Audio Adapter, sold separately)

NOTE: Remove the protective caps from each end of the optical cable

before inserting it into the jacks.

2. Connect the Transmitter Power

* Xbox 360 Audio Adapter required (sold separately, available on TurtleBeach.

com). If your HDTV has an optical AUDIO OUT jack, you can use it to con-

nect the optical cable to the transmitter.

DIGITAL OUT

CONSOLE

+ AAA BATTERY -

Right Ear Cup:

To remove

the battery

cover, slide

downward.

CAUTION: Be

sure to insert

batteries as

shown.

3. Insert the Headset Batteries as shown:

4. Insert the Microphone Boom:

Insert the boom so that the holes in

the mic casing and the marker on

the plug are facing your mouth.

ON - - OFFBASS BOOST

POWER

EFFECTS

5. Turn on the headset by pressing

and holding the power button

until you hear a tone, then release.

Xbox 360 E

Console

HDMI Cable

to HDMI OUT portto OPTICAL

OUT jack

to DIGITAL

IN jack

to HDMI IN port

FRONT

Wall Plug

Wall Outlet

BACK

Ear Force HD Audio Converter Setup

*Ear Force HD Audio Converter

*Ear Force HD Audio Converter is available for purchase at Turtlebeach.com/HDAC

Xbox 360

Chat Setup

1. Insert the right angle plug into the headphone jack on the Xbox 360 controller.

2. Insert the straight plug into the controller jack on the left ear cup of the headset.

Xbox 360 Controller

Xbox 360

Talkback Cable

Xbox 360

Input

Chat VolumeMic Mute

Current Setting

Dolby Digital

Choose the digital output

type for your system.

This setting only applies

to optical digital and HDMI

audio outputs.

Digital Stereo

Select Back

Digital Output

Dolby Digital 5.1

Dolby Digital 5.1 with WMA Pro

1. From the Xbox 360 Dashboard, go to Settings > System Settings > Console Settings > Audio > Digital Output.

Set “Digital Output” to “Dolby Digital 5.1”.

Conﬁgure Xbox 360

Settings

Voice Volume 10

Voice

Mute Kinect

Voice Output

Play Through Headset

Play Through Speakers

Voice Output

Game Volume 10

2. From the Xbox 360 Dashboard, go to Settings > Preferences > Voice.

Set Voice Volume to 10, set Game Volume to 10, and set “Voice Output” to “Play Through Headset”.

Home Theater Setup

Setting up the transmitter as illustrated below lets you listen to your console or TV with the X42 headset. You can also hear your

console on your home theater speakers without disconnecting the optical cable from the transmitter.

Connecting the X42 transmitter digital output to your home theater system will pass your console’s game audio from the transmitter’s

digital input to the home theater A/V receiver digital input, so you can hear the game audio on your X42 headset and your surround

sound speakers at the same time. To hear the game audio only on the X42 headset, turn down or mute your speakers.

Home Theater

Digital In

Transmitter

Digital Out

Digital Optical Cable

(included)

USB Power Cable

(included)

Additional Digital Optical Cable

(sold separately)

DIGITAL OUT

CONSOLE

Optional 3.5 mm to RCA Cable

(sold separately)

NOTE: Whenever a DIGITAL INPUT is detected, the ANALOG INPUT is turned OFF. So if you have your TV plugged into the ANALOG IN jack, you won’t

hear it if your Xbox is transmitting digital audio to the transmitter.

Connecting a Digital Music Player

The X42 features an analog input for connecting digital music players or other analog sources. The Analog Input volume can be

adjusted directly from the digital music player or analog source.

NOTE: The Analog Input is deactivated whenever a digital input is active, so both the digital and analog inputs cannot be used at the

same time.

Digital Music

Player

Analog Input

3.5 mm Cable

(sold separately)

Connect the digital music player to

the Analog Input if you want to process

the music with Virtual Surround Sound.

The X42 uses Dolby Digital 5.1 surround processing technology – the industry-standard format for encoding multi-channel game audio.

Dolby Digital processing recreates 5.1 channel surround sound using the X42 headset so you can hear the sound all around you, as if

you were listening to a 5.1 speaker system.

Dolby

Digital Processing

Stereo Sound Field

Sound ﬁeld with Dolby

Digital 5.1

Surround Sound Processing

Digital

Input

LED

Surround

Sound

LED

Dolby

Digital

LED

Here’s how the Dolby Digital mode operates:

· When the digital input signal is active, the Digital Input LED

turns on and the analog inputs are turned off.

· If the Surround LED is ON, surround sound processing

is activated. If the LED is OFF, surround sound processing is

deactivated and the signal will be heard as stereo.

· If a Dolby Digital encoded signal is detected by the digital input, the

front LED turns on and Dolby Digital processes the channels

to create surround sound in the headset. The surround sound must

be turned on to enable the Dolby Digital processing.

Surround Sound Angles

The X42 allows you to alter the virtual positioning of the Front and Surround speakers for the best surround sound experience. Press

the Surround Angles Button on the transmitter to cycle through 6 different presets, as illustrated below:

Press to cycle through 6 different

surround sound angles

Surround Sound Angle Presets:

Front Angle; 30 degrees

Rear Angle; 105 degrees

105

120

Front Angle; 45 degrees

Rear Angle; 120 degrees

135

Front Angle; 45 degrees

Rear Angle; 135 degrees

FR FL

120

Front Angle; 60 degrees

Rear Angle; 120 degrees

135

FR FL

Front Angle; 60 degrees

Rear Angle; 135 degrees

150

FR FL

Front Angle; 60 degrees

Rear Angle; 150 degrees

1 2 3

4 5 6

SURROUND

ANGLES

SURROUND

ON/ OFF

PAIR

The transmitter’s LEDs will blink

the same number of times as the

preset selected.

Chat Boost

™

Effects (EQ) Presets

The X42 features multiple Equalizer presets to enhance your gaming audio experience. Press the Effects button on the

X42 headset to cycle through the EQ presets as illustrated below:

ON - - OFFBASS BOOST

POWER

EFFECTS

Press the Effects Button to cycle

through the EQ Presets

Equalizer (EQ) Presets:

1. Flat

2. Bass Boost

3. Treble Boost

4. Bass and Treble Boost

Chat Boost is a dynamic talkback expander built into the X42 headset that automatically increases chat volume during loud

moments in your game, so you can always hear your teammates or other players, regardless of the game volume.

Typically, if you turn up a headset’s game volume, the incoming chat level from other players could become difﬁcult to hear

over the game sound. However, with Chat Boost, as the game audio increases, the chat volume also increases. When the game

volume quiets down again, Chat Boost automatically returns the chat level to your original volume setting.

To properly set the Chat Boost function:

1. Turn down the volume control on the headset so there’s no game audio.

2. Adjust the volume control on the Talkback Cable so you can hear the chat voices at a comfortable level.

3. Turn up the headset game volume and the chat volume will increase whenever the game gets louder, just as if the talkback

volume control is being automatically turned up along with the game level. Note that if the volume on the Talkback Cable

is set too loud, Chat Boost might increase the volume so much that the voices will distort. If that happens, turn down the

talkback volume on the Talkback Cable.

X42 Transmitter Technical Speciﬁcations

· 50mm diameter speakers with neodymium magnets

· Game audio frequency response: 20Hz - 20kHz, >120dB SPL @ 1kHz

· Condenser microphone frequency response: 50Hz - 15kHz

· Game audio Dual Band Digital 2.4GHz/5GHz RF wireless reception

· Headphone ampliﬁer: Stereo 27mW/ch, THD <1%

· Operates on (2) AAA batteries or (2) AAA rechargeable NiMH batteries

· Automatic shut down after approx 5 minutes of carrier loss or audio silence to conserve battery power

· Battery booster circuit extends battery life for up to 15 hours

· Dual Band Digital 2.4GHz/5GHz RF wireless transmission with up to 30 foot range

· Frequency response: 20Hz - 20kHz

· Optical TOSLINK digital audio input compatible with 48kHz digital audio stream

· Optical TOSLINK digital audio output pass-through of digital input stream

· Stereo 3.5mm analog input jack

· Maximum analog input level: 2Vpp (700mV rms)

· USB Power – (5V DC @ 350mA max)

X42 Headset Technical Speciﬁcations

Troubleshooting

Safety Notice

No sound

• Check that the headset volume control is turned up.

• Check that the transmitter power and optical cables are properly connected.

• Check that the headset is powered on. The LED on the left ear cup should be ashing.

• Check if the Power LED on the transmitter is on solid. If the LED is slowly pulsing, it indicates that the transmitter isn’t

communicating with the headset. If the headset is on solid and the transmitter LED is slowly pulsing, then the headset and

transmitter need to be “paired” as described in the section “Pairing the Headset and Transmitter” (see pg 4).

Audio Drops, Popping or Clicking Sounds

Audio dropouts, popping or clicking sounds on the headset are caused by poor reception. This can occur when:

• The headset and transmitter are out of range. For best performance, move within 20 feet from the transmitter.

• There’s a wall or other large object between the headset and transmitter.

• The transmitter is in a bad location that is interfering with the antenna.

• A wireless base station or wireless LAN are causing a lot of RF activity that’s blocking the RF signal from the transmitter. The

transmitter should be moved at least 5 feet away from a wireless router or gaming console.

Voice Chat Drops

• Most in-game voice chat drops are simply caused by network performance or “lag”. Usually they subside after a few moments so

please be patient. In extreme cases, you may have to leave a game and return to reset the chat function.

• If you use a wireless internet connection, low signal strength from your modem/router can make the voice chat malfunction.

A wired connection from your modem/router to your console is recommended for best results.

To avoid potential damage to the device, always disconnect all cables before transporting it.

WARNING: Permanent hearing damage can occur if a headset is used at high volumes for extended periods of time, so it is important

to keep the volume at a safe level. Over time, your ears adapt to loud volume levels, so a level that may not cause initial discomfort can

still damage your hearing. If you experience ringing in your ears after listening with the headset, it means the volume is set too loud.

The louder the volume is set, the less time it takes to affect your hearing. So, please take care to listen at moderate levels.

• Before placing a headset on your ears, turn the volume down completely, then slowly increase it to a comfortable level.

• Turn down the volume if you can’t hear people speaking near you.

• Avoid turning up the volume to block out noisy surroundings.

Manufacturer: Voyetra Turtle Beach

Manufacturers Address: 100 Summit Lake Drive, Suite 100, Valhalla, NY 10595

Product Name: Ear Force X42

Type of Product: Wireless Headset

Model Number(s): TBS-2270-01

Year of Manufacture: 2011

We, Voyetra Turtle Beach, Inc. of Elmsford, New York, declare under our own responsibility that the above-referenced product complies

with the following directives and standards:

Low Voltage Directive 2006/95/EC

EN 50332-2:2003

EN 60950-1:2006+A11:2009

Electromagnetic Compatibility Directive 1999/5/EC

ESTI EN 301 489-1 V1.8.1 (2008)

ESTI EN 301 489-3 V1.4.1 (2002)

ESTI EN 301 489-17 V2.1.1 (2009)

R&TTE Directive 1999/5/EC

ESTI EN 300 328 V1.7.1 (2006-10)

ESTI EN 300 440-1 V1.4.1 (2008-05)

ESTI EN 300 440-2 V1.2.1 (2008-05)

All test reports have been reviewed and approved with a Positive Opinion from the following Notiﬁed Bodies:

The technical documentation required by this Directive is maintained at the corporate headquarters of Voyetra Turtle Beach,

100 Summit Lake Drive, Suite 100, Valhalla, NY 10595.

Authorized Person:

____________________________ Date:________________

Printed Name: Frederick Romano

Title: Executive Vice President

EC Declaration of Conformity

11/17/11

Bay Area Compliance Laboratories, Corp (Shenzhen)

6/F, the 3rd Phase of WanLi Industrial Building

ShiHua Road, FuTian Free Trade Zone, Shenzhen, Guangdong, China

Tel: +86-755-33320018, Fax: +86-755-33320008, Web: baclcorp.com

Shenzhen EBO Technology Co., Ltd.

No. 710 Yihua Building, Futian District, Shenzhen, China 518040

Tel: +86-755-29451282 Fax: 86-755-83709189 Web: ebotek.cn

La page charge ...

Turtle Beach Ear Force X42 Manuel utilisateur

Marque: Turtle Beach

Modèle: Ear Force X42

Catégorie: Casques

Taper: Manuel utilisateur

Ce manuel convient également à

Télécharger le PDF

rapport

dans d''autres langues

English: Turtle Beach Ear Force X42 User manual

Turtle Beach Ear Force X42 Manuel utilisateur

Ce manuel convient également à

Turtle Beach Ear Force X42 Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents