Gigabit PoE (50V, 1.2A) Power Cord
Installation Requirements
13 mm wrench
Category 5 (or above) UTP cable for indoor installations
IMPORTANT: The UWB-XG requires the UniFi Controller v5.7 or higher,
available at:
ui.com/download/unifi
Outdoor Installation Requirements
Shielded Category 5 (or above) cabling should be used for all outdoor wired Ethernet
connections and should be grounded through the AC ground of the PoE.
We recommend that you protect your networks from harmful outdoor environments
and destructive ESD events with industrial-grade, shielded Ethernet cable from
Ubiquiti. For more details, visit: ui.com/toughcable
System Requirements
Linux, Mac OS X, or Microsoft Windows 7/8/10
Java Runtime Environment 1.8 or above recommended
Web Browser: Google Chrome (Other browsers may have limited functionality.)
UniFi Controller software v5.7 or newer (available at: ui.com/download/unifi)
Create PDF in your applications with the Pdfcrowd HTML to PDF API PDFCROWD
10 GbE
All UniFi devices support off-site management controllers. For setup details, see the
User Guide on the website: ui.com/download/unifi
Hardware Overview
LED
Ports
The 10 GbE port is a 1/10 Gbps Ethernet port used to connect to the LAN and
DHCP server. It can also be used to connect the power.
Create PDF in your applications with the Pdfcrowd HTML to PDF API PDFCROWD
1 GbE
Reset
Note: The UWB-XG can be powered using an 802.3bt PoE switch or the
included Gigabit PoE adapter. For instructions, see Connecting Power.
The 1 GbE port is a 10/100/1000 Ethernet port used for bridging. It can also be used
to connect the power.
The Reset button serves two functions for the UWB-XG:
Restart Press and release the Reset button quickly.
Restore to Factory Default Settings Press and hold the Reset button for more than
five seconds.
VESA Mounting
If you choose to use your own mount, remove the four M4 x 10 screws from the back of
the UWB-XG and detach the pre-installed mount.
Create PDF in your applications with the Pdfcrowd HTML to PDF API PDFCROWD
7. Proceed to Connecting Ethernet.
Wall Mount
To mount the UWB-XG on a wall or other sturdy flat surface, securely attach the
Adjustment Bracket to the wall using the four Lag Screws.
Note: The Adjustment Bracket must attach to a hard surface or other stable
structure.
1.
Create PDF in your applications with the Pdfcrowd HTML to PDF API PDFCROWD
8. Proceed to Connecting Ethernet.
Connecting Ethernet
Note: If you are using TOUGHCable, we recommend attaching the
TOUGHCable Connector(s) after you insert the cable(s) into the cable gland(s).
The cable gland is comprised of the following components:
Create PDF in your applications with the Pdfcrowd HTML to PDF API PDFCROWD
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
Ubiquiti UWB-XG Manuel utilisateur
- Taper
- Manuel utilisateur
- Ce manuel convient également à
dans d''autres langues
- English: Ubiquiti UWB-XG User manual
Documents connexes
-
Ubiquiti UniFi AP AC Outdoor Guide de démarrage rapide
-
-
Ubiquiti UAP Manuel utilisateur
-
-
-
-
Ubiquiti ULED-AT Guide de démarrage rapide
-
-
Ubiquiti NanoStation loco Manuel utilisateur
-
Ubiquiti UAP-AC-IW Guide de démarrage rapide