Uniden DFR7 Le manuel du propriétaire

Catégorie
Détecteurs radar / lidar
Taper
Le manuel du propriétaire
LONG RANGE Radar/Laser Detector
Detailed Users Manual
DFR7
Issue 4, March 2019
Printed in Korea
© 2019 Uniden America Corporation
Irving, Texas
CUSTOMER CARE
At Uniden®, we care about you!
If you need assistance, please do NOT return this product to your place of purchase.
Save your receipt/proof of purchase for warranty.
Quickly find answers to your questions by:
1. Reading your owner’s manual, included with this product.
2. Visiting our customer support website at www.uniden.com.
Images in this manual may differ slightly from your actual product.
DISCLAIMER: Radar detectors are illegal in some states. Some states prohibit mounting any object on your
windshield. Check applicable law in your state and any state in which you use the product to verify that using
and mounting a radar detector is legal. Uniden radar detectors are not manufactured and/or sold with the
intent to be used for illegal purposes. Drive safely and exercise caution while using this product. Do not change
settings of the product while driving. Uniden expects consumer’s use of these products to be in compliance with
all local, state, and federal law. Uniden expressly disclaims any liability arising out of or related to your use of this
product.
CONTENTS
CUSTOMER CARE .......................................................................................................................................2
DFR7 OVERVIEW ...........................................................................................5
FEATURES ......................................................................................................................................................5
INSTALL AND TURN ON DFR7 ......................................................................6
INSTALL/POWER ON .................................................................................................................................6
Windshield ...............................................................................................................................................6
Dashboard ................................................................................................................................................6
WHAT’S IN THE BOX ......................................................................................6
PARTS OF THE DFR7 ...................................................................................... 7
NON-KEY ELEMENTS ................................................................................................................................ 8
CHARGER ......................................................................................................................................................8
MENU SYSTEM ...............................................................................................9
BASIC OPERATIONS ....................................................................................11
FEATURE DETAILS .......................................................................................11
USER MARKS (LASER AND RADAR SITES) ......................................................................................11
HIGHWAY VS CITY MODE .....................................................................................................................12
POP MODE ..................................................................................................................................................12
SCAN DISPLAY ..........................................................................................................................................12
ALARM PRIORITIES ..................................................................................................................................12
MUTE MEMORY ........................................................................................................................................12
MAINTENANCE ............................................................................................12
MAINTAINING THE EQUIPMENT ........................................................................................................12
UPDATING THE FIRMWARE/DATABASE ..........................................................................................13
TROUBLESHOOTING ...................................................................................13
SPECIFICATIONS .........................................................................................13
FCC/IC COMPLIANCE ..................................................................................13
ONEYEAR LIMITED WARRANTY ...............................................................14
- 5 -
UNIDEN
LONG RANGE RADAR/LASER DETECTOR
DETAILED USER’S MANUAL
DFR7
DFR7 OVERVIEW
The DFR7 is a top of the line Radar Detector with a built-in GPS feature. With the DFR7, you can mark
geographical points where you commonly encounter radar transmissions. These can be school zones, red-light
cameras, and places where police frequently monitor traffic. You can mark these points so the detector will
announce “User mark ahead” when you approach them. Among other announcements, the Voice Notification
feature lets you know when you are approaching a radar and what type of radar it is (red light, speed, etc).
FEATURES
Super Long Range Laser Radar Detection
Voice Notifications
Radar band frequency displays
GPS for Red Light and Speed camera locations
Easy to read OLED display
User Mark set and voice notification
Advanced K band filter
Spectre I and IV undetectable
Displays Signal Strength and Vehicle Battery Voltage
Max. Speed Warning System
- 6 -
INSTALL AND TURN ON DFR7
You can mount the DFR7 on the windshield (bracket included) or on the dashboard (hook and loop tape
included).
INSTALL/POWER ON
Windshield
When you mount the DFR7 on the windshield, mount it in the middle of the windshield between the driver and
passenger. Be sure there are no obstructions and that there is a clear view through the back window.
1. Attach the rubber suction cups to the bracket and push the cups firmly onto the windshield.
2. Slide the unit onto the bracket until it clicks into place.
3. Plug the power cord RJ11 connector into the DFR7 and plug the cigarette lighter adapter into the vehicle’s
cigarette lighter.
4. The DFR7 automatically turns on and runs through a self test cycle.
Release the DFR7 from the bracket by pressing the Eject key on top of the detector.
Dashboard
The same types of mounting requirements for the windshield apply for mounting the unit on the dashboard.
1. Attach the unit to the dashboard using the hook and loop fastener tape.
2. Plug the power cord RJ11 connector into the DFR7 and plug the cigarette lighter adapter into the vehicle’s
cigarette lighter.
3. The DFR7 automatically turns on and runs through a self test cycle.
Pull the bracket from the dashboard, separating the hook and loop tape.
WHATS IN THE BOX
DFR7 Radar Detector 12V DC Power Cord with RJ11 Connector
Not Shown:
Hook and Loop Fastener Tape
Detailed Owner’s Manual
Windshield Mounting Bracket
- 7 -
PARTS OF THE DFR7
Audio
Jack
Power
Jack
POWER
VOL +
MENU
VOL −
USB
Eject
Eagle
Eye
Latch
Slot
MUTE/DIM
MARK
Signal
Strength
- - - Ka 33.77GHz
mph
KEY PRESS TO... PRESS AND HOLD TO...
POWER
Turn DFR7 on and off. NA
VOL +
Turn volume up (7 levels: 0 - 6).
In Menus, go to next item.
Press and hold both
VOL +
and
VOL –
to
change modes between HIGHWAY and
CITY.
VOL –
Turn volume down (7 levels: 0 - 6).
In Menus, go to previous item.
MENU
Access the Menu system.
In the Menu system, press to cycle through
options for the current menu item.
Exit the Menu system.
MUTE/DIM
MUTE
MUTE on - Press
MUTE/DIM
to mute an alarm.
Returns to normal operation 10 seconds after the
alert ends or if a different band is detected during
Mute mode. Mute On displays for a few seconds.
MUTE off - Press
MUTE/DIM
to restore audible
alarms before the 10 second automatic mute
time-out.
MUTE MEMORY
Save a Mute location (Mute Memory) - press
MUTE/DIM
again while Mute On displays to
save that GPS location and frequency to memory.
Mute Memory displays on the screen.
DFR7 100 Mute Memory points.
Delete Mute Memory - Press
MUTE/DIM
while
Mute Memory displays; the DFR7 displays a
delete confirmation message. Press
MUTE/DIM
again to confirm.
DIM - Changes the display backlight
intensity:
Bright
Dim
Dark
Off
- 8 -
KEY PRESS TO... PRESS AND HOLD TO...
MARK
User Mark. A User Mark is a manually tagged
geographic location where an alarm is usually
found. The DFR7 alerts when close to these User
Marks.
Add - Press
MARK
when you are at the alarm
location.
Delete
An error message displays/sounds if memory is full
or there is a GPS error.
Delete all User Marks.
NON-KEY ELEMENTS
ELEMENT WHAT IT DOES
Eagle Eye Provides a 360° monitoring radius.
Latch Slot
Insert the bracket latch into this slot.
Mini USB Provides PC connection for data updates.
Audio Jack Plug in headset.
Eject Press to release the bracket latch.
Power Jack Plug the 12V Power Cord here.
Signal Strength Displays received signal strength (5 levels).
CHARGER
USB port
MUTE
button
LED
ELEMENT WHAT IT DOES
MUTE button Press the mute button to mute an alarm. Returns to
normal operation 10 seconds after the alert ends or if a
different band is detected during Mute mode. Mute On
displays on the DFR7 for a few seconds.
Save a Mute location (Mute Memory) - press the mute
button again while Mute On displays on the DFR7 to
save that GPS location and frequency to memory. Mute
Memory displays on the screen.
DFR7 stores up to 100 Mute Memory points.
Delete Mute Memory - Press the mute button while Mute
Memory displays on the DFR7; the DFR7 displays a delete
confirmation message. Press the mute button again to
confirm.
LED (Red) Off: Power is off.
Steady on: Power is on.
Flashing: Receiving an alert. The faster it flashes, the
stronger the signal.
USB Port Use this USB port to charge mobile devices.
- 9 -
MENU SYSTEM
Menus let you set up the system to your own requirements. You can turn different bands on and off and set
specific items such as speed or auto mute.
Press
MENU
to access the Menu system. The screen displays the selection’s current status. For example, if you
press
MENU
and the screen displays Voice: ON, you have the option of turning Voice to OFF.
Use the following keys to navigate the menus:
x
MENU
: Change a menu item setting (press and hold to exit the Menu system).
x
VOL +
: Go to the next Menu item.
x
VOL –
: Go to the previous Menu item.
MENU ITEM WHAT IT DOES SETTINGS
GPS Determines your geographic location. On (Default)
Off
Speed Camera
(GPS on)
Notifies you if any speed cameras are nearby. On (Default)
Off
Red Light
Camera
(GPS on)
Notifies you if any red light cameras are nearby. On (Default)
Off
Voice Turns voice alert on or off under the following
conditions:
Type of radar/laser
Band alarms
If Voice is turned off, a chime sounds during alerts.
On (Default)
Off
X Band Turn off to have the detector ignore X Band frequencies
(Highway only).
On (Default)
Off
K Band Turn off to have the detector ignore K Band frequencies. On (Default)
Off
Ka Band Turn off to have the detector ignore Ka Band
frequencies.
On (Default)
Off
Laser Turn off to have the detector ignore lasers. On (Default)
Off
POP Detects POP transmissions (very brief transmissions, too
fast for some detectors to hear).
On
Off (Default)
K Filter Filters noise from the K band to prevent false detections. On
Off (Default)
TSF Traffic Sensor Filter. Prevents false alarms caused by
traffic monitoring radar systems.
On
Off (Default)
Ka Filter Filters noise from the Ka band to prevent false
detections.
On
Off (Default)
K Narrow/
Wide
K Narrow scans for K radar guns used in the US only and
reduces false alarms.
K Narrow
K Wide (Default)
Ka Narrow/
Wide
Ka Narrow scans for Ka radar guns used in the US only
and reduces false alarms. Ka Narrow also provides a fast
response to Ka POP radar guns.
Ka Wide scans Super Wide Ka band.
Ka Narrow (Default)
Ka Wide
Scan
(GPS on)
If Scan is turned on, a dot displays and moves back and
forth on the screen to indicate scanning status.
On
Off (Default)
- 10 -
MENU ITEM WHAT IT DOES SETTINGS
Display
(GPS on)
Lets you display the following:
x Speed
mph, km/h (Default)
x Compass (8 points) NW, W, etc
x Voltage V
x Altitude M (if Speed Unit set to km/h)
F (if Speed Unit set to mph)
x Off
Display
(GPS off)
Lets you display voltage setting or turn the display off. V (Default)
Off
Speed Unit
(GPS on)
Sets the speed measurement type. mph (Default)
km/h
Auto Mute Auto Mute reduces alarm level to 1 after 3 seconds
and returns to normal operation (Auto Mute = OFF) 10
seconds after the alert ends. If the same alarm sounds
within the 10 second period, Auto Mute remains at level
1. The unit returns to normal operation (Auto Mute =
OFF) if a different band is detected during Auto Mute =
ON mode.
On (Default)
Off
Backlight Turns the front k
ey backlight on and off.
Press and hold MUTE/DIM to select a brightness level.
On (Default)
Off
Quiet Ride
(GPS on)
Mutes radar alarms for K and X bands when you drive
under the speed limit you set here.
5 - 50 in 5 mph (10 - 80 in 10 km/h)
intervals
Off (Default)
Limit Speed
(GPS on)
Sounds an alarm when the vehicle reaches a specific
speed.
50 to 100 in 5 mph (80 to 160 in 10
km/h) intervals
On
Off (Default)
GMT
(GPS on)
Sets time zone according to Gre
enwich Mean Time
(GMT).
Most common time zone settings
for North America are:
x GMT-05:00 - Eastern Standard
x GMT-06:00 - Central Standard
x GMT-07:00 - Mountain Standard
x GMT-08:00 - Pacific Standard
x GMT-09:00 - Yukon Standard
x GMT-10:00 - Alaska-Hawaii
Standard
DST
(GPS on)
Daylight Saving Time On
Off (Default)
BAT Warning Issues a warning if the vehicle battery voltage drops
below 11V.
On
Off (Default)
BAT Saver
(GPS on)
Turns off power to the DFR7 if the speed stays at 0 or if
the GPS is not connected for more than an hour.
On
Off (Default)
Self Test Runs a self diagnostic test at power up to check for
faults.
On (Default)
Off
Factory Reset? Resets all settings except GMT to the factory defaults.
There is no confirmation request for reset.
NA
Delete All
Mute
(GPS on)
Delete all saved Mute Memory points
There is no confirmation request for deleting all Mute
Memory points.
NA
- 11 -
MENU ITEM WHAT IT DOES SETTINGS
FW Ver Displays the latest firmware version. NA
DB Ver
(GPS on)
Displays the latest database version NA
Exit Closes the Menu system. NA
BASIC OPERATIONS
HOW DO I ...? TRY THIS...
Turn on the DFR7 Press
POWER
. The unit turns on and runs through an initial self-check if Self
Test is turned on. It displays the different bands and their settings.
The DFR7 turns on automatically when you start the vehicle.
Adjust the volume Press
VOL +
to increase volume. The unit beeps and displays a number
increase.
Press
VOL –
to decrease volume. The unit beeps and displays a number
decrease.
Mute alarm audio during the
alert
Press
MUTE/DIM
during an audio alarm to mute it. (This is especially useful
in situations where the alert may be prolonged, such as at red lights.) You
can also press the MUTE button on the charger (see page 8).
Change the screen’s brightness Press and hold
MUTE/DIM
. The DFR7 announces the brightness level
(Bright, Dim, Dark, or Off) as it changes to that level. Press and hold the key
again to cycle between the brightness levels.
Turn bands on and off Press
MENU
and cycle through the menu options until the band you want to
turn off displays. Press
MENU
again to change that band’s status.
Change Highway to City and
back
Press and hold both
VOL +
and
VOL –
for at least 1 second to alternate
between HIGHWAY and CITY setting.
Set a user mark Press
MARK
to create a user mark when you are at a location where there is
normally some type of radar. The DFR7 announces “User mark logged.” The
DFR7 will announce when you approach user marks.
The DFR7 can save up to 200 user marks.
Delete a user mark Press
MARK
again at that location to delete the user mark.
The DFR7 does NOT ask for confirmation before deleting user marks.
Delete ALL user marks Press and hold
MARK
to delete all user marks.
The DFR7 DOES ask for confirmation before deleting all user marks. Press
MARK again to confirm.
Update the firmware and
database
Refer to www.unidensupport.com for details.
FEATURE DETAILS
USER MARKS (LASER AND RADAR SITES)
With the DFR7, you can mark geographical points where you commonly encounter radar transmissions, These
can be school zones, red-light cameras, and places where police frequently monitor traffic.
When you are at the location, press
MARK
. The DFR7 announces “User mark logged.” Now, when you approach
these points, the DFR7 announces “User mark ahead.”
Press and hold
MARK
at that location to delete that user mark.
The DFR7 holds up to 200 user marks.
- 12 -
HIGHWAY VS CITY MODE
Radar detectors operate with two sensitivity levels. These levels determine the types of signals and signal ranges
(bands) detected. Highway mode is the most sensitive level while City mode is the least sensitive. If the X band
is left on in City mode, a radar detector can pick up many X band signals (such as garage door openers) that
generate false alerts. The DFR7 turns off the X band for City mode. When you are on the highway, there is less
chance of picking up X band false alerts, so the DFR7 keeps the X band on in Highway mode.
Press and hold both
VOL +
and
VOL –
for at least 1 second to alternate between HIGHWAY and CITY mode.
POP MODE
In POP mode, the DFR7 can detect short burst from radars that are too fast for many other detectors to catch.
You can turn POP mode on and off in the Menu system.
SCAN DISPLAY
A small dot on the screen indicates that the unit is scanning for signals. This dot travels back and forth in the
middle of the screen. You can turn this display on and off in the Menu system.
Scan Display
- - -
mph
C-NoX
.
Elements on the screen vary according to what you turn on
and o in the Menu system
CITY
ALARM PRIORITIES
x Speed Camera / Red Light Camera / User Mark Alarm/POI Limit Speed Alarm
x Laser signal
x X, K, Ka Band signal
x User Limit Speed Alarm
x Vehicle Low Battery Voltage Warning, Vehicle Battery Saver Alarm
MUTE MEMORY
Use Mute Memory to mute known areas of false alarms (such as department store automatic doors). The DFR7
remembers where you muted the audio (GPS location) and the frequency you muted. It will automatically
mute when you travel to that location and the saved frequency is detected; however, if a different frequency is
detected, the DFR7 alerts to that different frequency.
When you press
MUTE/DIM
or the MUTE button on the charger to mute audio for a specific location, Mute On
displays. While Mute On displays, press
MUTE/DIM
or the MUTE button on the charger again to save that GPS
location to memory. Mute Memory displays on the screen.
DFR7 stores up to 100 Mute Memory points.
To delete Mute Memory points, press
MUTE/DIM
or the MUTE button on the charger while Mute Memory
displays. The DFR7 displays a delete confirmation message; press
MUTE/DIM
or the MUTE button on the
charger again to confirm. You can also delete Mute Memory points from Menus/Delete All Mute?
MAINTENANCE
MAINTAINING THE EQUIPMENT
The DFR7 requires very little physical maintenance. Wipe it with a soft cloth to keep dust from accumulating.
Check the power cord connections to keep them clean and free of corrosion.
- 13 -
UPDATING THE FIRMWARE/DATABASE
Uniden recommends that you update your DFR7’s firmware and database periodically. Go to www.
unidensupport.com, find your model, and check if you have the latest firmware.
TROUBLESHOOTING
IF... TRY THIS...
The unit won’t turn on Check the connections. Be sure they are all secure.
No display or audio. x If no display, check the connections. Be sure they are all
secure.
x If no audio, check if Voice is turned off.
The unit alarms when the vehicle hits bumps. Check the connections. Be sure they are all secure.
The unit alarms briefly in the same location but
no radar source was in view.
There may be a motion sensor or house alarm in use within
range.
The DFR7 did not alert when a police car was in
view.
The officer may not have radar/laser units turned on.
Check that the band is turned on. Press
MENU
and cycle
through the options to get to the bands. If the band is
turned off, the OLED will show OFF. Turn the band on.
The vehicle starts but the DFR7 does not turn
on.
Verify that the power cord is securely connected to the unit
and inserted into the cigarette lighter jack.
SPECIFICATIONS
Receiver Type: Antenna Type:
Radar Double Conversion Superheterodyne
Self-Contained Antenna
Radar Linear Polarized E-vector
Vertical
Laser Pulsed Laser Signal Receiver Laser
Front
Convex Condenser Lens
Frequency: Laser
Back
Concave Condenser Lens
X 10.525 GHz Dimensions 110.00 mm (D) x 69.00 mm
(W) x 29.50 mm (H)
K 24.150 GHz Weight 6 oz (170g)
Ka 33.400 - 36.000 GHz Operating Temp. -4° to +185° F (Radar/Laser)
-20° to +85° C (Radar/Laser)
Laser 800 nm - 1100 nm Storage Temp. -22° to +203° F (Radar/Laser)
-30° to +95° C (Radar/Laser)
Detector Type: Operating Power Source DC 11.0 to 16.0 V
Radar Scanning Frequency Discriminator USB Interface USB Specification 2.0/1.1
Laser Pulse Width Discriminator
Alarm
Type
Beep (Detected Band and Signal
strength)
FCC/IC COMPLIANCE
FCC: AMWUA1602
ICC: 513C-UA1602
FCC Compliance
This device complies with Part 15 of the FCC rules. Operaon is subjected to the following two condions: (1) this device may
not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause
undesired operaon.
Changes or modicaons not expressly approved by the party responsible for compliance could void your authority to operate
the equipment.
- 14 -
Avis de conformité à la FCC : Ce disposif a été testé et s’avère conforme à l’arcle 15 des règlements de la Commission fédérale
des communicaons (FCC). Ce disposif est soumis aux condions suivantes: 1) Ce disposif ne doit pas causer d’interférences
nuisibles et; 2) Il doit pouvoir supporter les parasites qu’il reçoit, incluant les parasites pouvant nuire à son fonconnement.
Tout changement ou modicaon non approuvé expressément par la pare responsable pourrait annuler le droit à l’ulisateur de
faire fonconner cet équipement.
IC Compliance
This device complies with Industry Canada license-exempt RSS standard(s).Operaon is subject to the following two condions:
(1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause
undesired operaon of the device.
Changes or modicaons not expressly approved by the party responsible for compliance could void your authority to operate
the equipment.
Cet appareil est conforme aux normes RSS exemptes de licences d’Industrie Canada. Son fonconnement est soumis aux deux
condions suivantes : (1) cet appareil ne doit pas causer d’interférences nuisibles et (2), il doit pouvoir accepter les interférences,
incluant celles pouvant nuire à son fonconnement normal.
Tout changement ou modicaon non approuvé expressément par la pare responsable pourrait annuler le droit à l’ulisateur de
faire fonconner cet équipement.
ONE-YEAR LIMITED WARRANTY
Keep your receipt! Proof of purchase is required for warranty service.
WARRANTOR: UNIDEN AMERICA CORP. (“Uniden”)
ELEMENTS OF WARRANTY: Uniden warrants, for one year, to the original retail owner, this Uniden Product to be free from
defects in materials and crasmanship with only the limitaons or exclusions set out below.
WARRANTY DURATION: This warranty to the original user shall terminate and be of no further eect 12 months aer the date
of original retail sale. The warranty is invalid if the Product is (A) damaged or not maintained as reasonable or necessary, (B)
modied, altered, or used as part of any conversion kits, subassemblies, or any conguraons not sold by Uniden, (C) improperly
installed, (D) serviced or repaired by someone other than an authorized Uniden service center for a defect or malfuncon covered
by this warranty, (E) used in any conjuncon with equipment or parts or as part of any system not manufactured by Uniden, or (F)
installed or programmed by anyone other than as detailed by the Operang Guide for this product.
STATEMENT OF REMEDY: In the event that the product does not conform to this warranty at any me while this warranty is in
eect, warrantor will repair the defect and return it to you without charge for parts, service, or any other cost (except shipping
and handling) incurred by warrantor or its representaves in connecon with the performance of this warranty. THE LIMITED
WARRANTY SET FORTH ABOVE IS THE SOLE AND ENTIRE WARRANTY PERTAINING TO THE PRODUCT AND IS IN LIEU OF AND
EXCLUDES ALL OTHER WARRANTIES OF ANY NATURE WHATSOEVER, WHETHER EXPRESS, IMPLIED OR ARISING BY OPERATION
OF LAW, INCLUDING, BUT NOT LIMITED TO ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE. THIS WARRANTY DOES NOT COVER OR PROVIDE FOR THE REIMBURSEMENT OR PAYMENT OF INCIDENTAL OR
CONSEQUENTIAL DAMAGES. Some states do not allow this exclusion or limitaon of incidental or consequenal damages so the
above limitaon or exclusion may not apply to you.
LEGAL REMEDIES: This warranty gives you specic legal rights, and you may also have other rights which vary from state to state.
This warranty is void outside the United States of America.
PROCEDURE FOR OBTAINING PERFORMANCE OF WARRANTY: If, aer following the instrucons in this Operang Guide, you are
certain that the Product is defecve, pack the Product carefully (preferably in its original packaging). Include evidence of original
purchase and a note describing the defect that has caused you to return it. The Product should be shipped freight prepaid, by
traceable means, or delivered, to warrantor at:
Uniden America Corporaon
C/O Saddle Creek
743 Henriea Creek Rd., Suite 100
Roanoke, TX 76262
POP Mode is a trademark of MPH Industries, Inc.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16

Uniden DFR7 Le manuel du propriétaire

Catégorie
Détecteurs radar / lidar
Taper
Le manuel du propriétaire

dans d''autres langues