Simplicity 1695882 Manuel utilisateur
- Catégorie
- Souffleuses à neige
- Taper
- Manuel utilisateur
Ce manuel convient également à
Single Stage Snowthrower
Model No. Description
1695882 Single Stage Snowthrower, 9.0 TP / 22 Inch
1696170-00 Single Stage Snowthrower, 9.0 TP / 22 Inch
1750865
Revision: A
Operator’s Manual
Not for
Reproduction
2
The Illustrated Parts List for this machine can be downloaded from www.simplicitymfg.com. Please provide model and
serial number when ordering replacement parts
Copyright © 2012 Briggs & Stratton Power Products Group, LLC
All rights reserved.
General Information
Thank you for purchasing this quality-built SNAPPER snowthrower. We’re pleased that you’ve placed your confidence in
our brand. When operated and maintained according to the instructions in this manual, your SNAPPER product will provide
many years of dependable service.
This manual contains safety information to make you aware of the hazards and risks associated with snowthrowers and
how to avoid them. This snowthrower is designed and intended only for snow removal and is not intended for any other
purpose. It is important that you read and understand these instructions thoroughly before attempting to start or operate this
equipment. Save these instructions for future reference.
Product Reference Data
When contacting your authorized dealer for
replacement parts, service, or information you
MUST have these numbers.
Record your model name/number, manufacturer’s
identification numbers, and engine serial numbers in the
space provided for easy access.
Product Identification Tag
Model / Modéle / Model xxxxxxxx
Serial / Sèrie / Serie xxxxxxxxxx
Briggs & Stratton Power Products Group, L.L.C.
Milwaukee, WI 53201 USA
ENGINE REFERENCE DATA
PRODUCT REFERENCE DATA
Model Description Name/Number
Unit Serial Number
Dealer Name Date Purchased
Engine Make
Engine Type/Spec
Engine Model
Engine Code/Serial Number
Not for
Reproduction
3
en
Table of Contents
Operator Safety ............................................................................. 4
Hazard Symbols and Meanings ................................................. 4
Control Symbols on Equipment ................................................. 4
Safety Alert Symbols and Signal Words .................................... 5
Safety Decals ............................................................................ 9
Features and Controls .................................................................. 10
Snowthrower Controls and Operation Decals ............................ 10
Engine Controls ......................................................................... 10
Operation ....................................................................................... 11
Check and Add Oil .................................................................... 11
Fuel Recommendations ............................................................ 12
Add Fuel .................................................................................... 12
Start the Engine ......................................................................... 13
Stop the Engine ......................................................................... 14
Operate the Snowthrower .......................................................... 15
Stop the Snowthrower ............................................................... 16
Snowthrower Safety Test ........................................................... 16
................................................. 17
Clear a Clogged Discharge Chute ............................................. 17
Operating Tips ........................................................................... 17
Maintenance ................................................................................. 18
Snowthrower Maintenance ........................................................ 18
Engine Maintenance ................................................................. 18
Emissions Control Statement .................................................... 18
Change the Oil .......................................................................... 18
Access the Spark Plug .............................................................. 19
Auger Cable Adjustment ........................................................... 20
Storage ........................................................................................... 21
Troubleshooting ............................................................................ 22
Warranty ......................................................................................... 23
Emission Statement ...................................................................... 24
Specifications ................................................................................ 25
NOTE: In these instructions, “left” and “right” are referenced from the
operating position.
Table of Contents
Not for
Reproduction
4
Operator Safety
Turn Choke Closed to Start.
Turn Choke Open to Run.
Push Primer 2 Times.
Plug in Extension Cord.
Push Button to Start.
Engage Auger.
Chute Rotation.
Cold Engine.
Hot Engine.
Read the Operator’s Manual for
operating and safety instructions.
before performing maintenance and
repair work.
Thrown Objects Hazard.
Fire Hazard.
Amputation Hazard - rotating auger.
Carbon Monoxide Poisoning Hazard.
Electric Shock.
Amputation Hazard - rotating
impeller.
Amputation Hazard - rotating
impeller.
Amputation Hazard - do not touch
moving parts.
Hot Surface Hazard.
Hazard Symbols and Meanings Control Symbols on Equipment
Not for
Reproduction
5
en
Operator Safety
Safety Alert Symbol and Signal Words
The safety alert symbol and signal word (DANGER,
WARNING, CAUTION, or NOTICE) is used to indicate the
likelihood and potential severity of personal injury and/or damage
to the product. In addition, a hazard symbol may be used to
represent the type of hazard.
DANGER indicates a hazard which, if not avoided,
will result in death or serious injury.
WARNING indicates a hazard which, if not avoided,
could result in death or serious injury.
CAUTION indicates a hazard which, if not avoided,
could result in minor or moderate injury.
NOTICE indicates a situation that could result in
damage to the product.
WARNING
Certain components in this product and its related accessories
contain chemicals known to the State of California to cause
cancer, birth defects, or other reproductive harm. Wash hands
after handling.
WARNING
The engine exhaust from this product contains chemicals
known to the State of California to cause cancer, birth defects,
or other reproductive harm.
WARNING
chute is the most common cause of injury associated with
snowthrowers.
feet, and throwing objects. Read and observe all the safety
instructions in this manual. Failure to do so could result in
death or serious injury.
WARNING
Read, understand, and follow all the
instructions on the snowthrower and in the
operator’s manual before operating this unit.
Failure to observe the safet y instructions in this
manual could result in death or serious injury.
the snowthrower.
snowthrower.
quickly.
proper instruction.
snowthrower will be stored for an extended period.
necessary.
unless you have been properly trained. Improper servicing
of the snowthrower can result in hazardous operation,
equipment damage, and voiding of the product warranty.
DANGER
Discharge chute contains rotating impeller
to throw snow. Never clear or unclog the
discharge chute with your hands. Fingers can
quickly become caught in the impeller. Always
use a clean-out tool.
Failure to observe these safety instructions
will result in traumatic amputation or severe
laceration.
Not for
Reproduction
6
Operator Safety
DANGER
rotating parts. Rotating parts can contact
or entangle hands, feet, hair, clothing, or
accessories.
Failure to observe these safety instructions
will result in traumatic amputation or severe
laceration.
snowthrower, make sure the engine is OFF, spark plug wire
is disconnected, and all moving parts have stopped.
clear of the discharge opening at all times.
other safety devices in place and working.
running. Always disengage the auger and traction controls,
stop engine, and remove keys.
snowthrower and auger. Scarves, mittens, dangling
drawstrings, loose clothes, and pants can quickly become
caught in the rotating device and amputation will occur. Tie
up long hair and remove jewelry.
prevent freeze-up of the collector/impeller.
snowthrower is transported or not in use.
WARNING
Objects can be picked up by auger and thrown
from chute. Never discharge snow toward
bystanders or allow anyone in front of the
snowthrower. Failure to observe these safety
instructions will result in death or serious injury.
and while performing an adjustment or repair.
Nearby pedestrians, pets, or property may be harmed by
objects being thrown.
snowthrower. Don’t run over items such as gravel, doormats,
newspapers, toys, and rocks hidden under snow, as they
can all be thrown from the chute or jam in the auger.
drives, walks, or roads.
rock surface.
automobiles, window wells, drop-offs, and the like without
proper adjustment of the discharge chute angle.
operate the snowthrower. Mark off boundaries of walkways
and driveways.
WARNING
Tragic accidents can occur if the operator is
not alert to the presence of children. Children
are often attracted to the unit and the operating
activity. Never assume the children will remain
where you last saw them.
often attracted to the equipment. Be mindful of all persons
present.
trees, or other objects that may obscure vision. Children may
be present.
WARNING
Engines give off carbon monoxide, an
odorless, colorless, poison gas. Breathing
carbon monoxide can cause nausea, fainting,
or death.
windows are open.
Not for
Reproduction
7
en
Operator Safety
WARNING
Fuel and its vapors are extremely flammable
and explosive. Always handle fuel with
extreme care.
Failure to observe these safety instructions can
cause a fire or explosion which will result in
severe burns or death.
WHEN ADDING FUEL
removing the fuel cap and adding fuel.
gasoline, do not fill above the bottom of the fuel tank neck.
and other ignition sources.
leaks. Replace if necessary.
WHEN STARTING ENGINE
equipped) are in place and secured.
the snowthrower away from the area of the spill, and avoid
creating any source of ignition, until the fuel vapors have
dissipated.
instructions in this manual.
position, move throttle (if equipped) to FAST position and
crank until engine starts.
WHEN OPERATING EQUIPMENT
to spill.
equipped) or the air filter (if equipped) removed.
WHEN CHANGING OIL
be empty or fuel can leak out and result in a fire or explosion.
WHEN TRANSPORTING EQUIPMENT
OFF.
WHEN STORING GASOLINE OR EQUIPMENT WITH FUEL
IN TANK
appliances that have pilot light or other ignition source
because they can ignite fuel vapors.
WARNING
Safe operation of the snowthrower requires the
proper care and maintenance of the engine.
the engine may cause personal injury.
to clear snow.
equipped with electric drive motors or electric starting
motors.
WARNING
Starting engine creates sparking.
Sparking can ignite nearby flammable gases.
Explosion and fire could result.
engine.
are flammable.
WARNING
Running the engine produces heat. Engine
parts, especially muffler, become extremely
hot.
Failure to observe these safety instructions
could result in severe thermal burns on
contact.
cylinder, and fins to cool before touching.
using equipment on forest-covered, grass-covered, or brush-
covered unimproved land.
Section 4442, to use or operate the engine on any forest-
covered, brush-covered, or grass-covered land unless the
exhaust system is equipped with a spark arrester, as defined
in Section 4442, maintained in effective working order. Other
states or federal jurisdictions may have similar laws. Contact
the original equipment manufacturer, retailer, or dealer to
obtain a spark arrester designed for the exhaust system
installed on this engine.
Not for
Reproduction
8
Operator Safety
WARNING
This snowthrower must be properly maintained
to ensure safe operation and performance.
Failure to observe the safety instructions in this
manual could result in death or serious injury.
snowthrower, shut OFF the engine, disconnect spark plug
wire, and keep the wire away from the plug to prevent
someone from accidently starting the engine.
for proper tightness.
condition.
operation regularly and make necessary repairs if they are
not functioning properly.
deterioration. Frequently check components and replace
with recommended parts, when necessary.
required.
when making repairs.
adjustments.
accessories such as wheel weights, counterweights, or
cabs.
is running (except when specifically recommended by the
factory).
WARNING
This snowthrower is only as safe as the
operator. If it is misused, or not properly
maintained, it can be dangerous. Remember
you are responsible for your safety and those
around you.
small children and pets.
used and remove all doormats, sleds, boards, wires, and
other foreign objects.
winter clothing.
operating the snowthrower in reverse.
light. Always be sure of your footing, and keep a firm hold on
the handles.
caution when changing direction on slopes. Do not attempt
to clear steep slopes.
snow too quickly.
slippery surfaces. Look behind the snowthrower and use
care when operating in reverse.
such as roofs of residences, garages, porches, or other such
structures or buildings.
snowthrower safely enough to protect themselves and
others from injury.
use the snowthrower for any other purpose.
disconnect the cord on electric motors, thoroughly inspect
the snowthrower for any damage, and repair the damage
before restarting and operating the snowthrower.
engine. Vibration is generally a warning of trouble. See an
authorized dealer if necessary for repairs.
disconnect the power cord after the engine starts.
Not for
Reproduction
9
en
Operator Safety
Safety Decals
Before operating your snowthrower, read the safety decals
installed on your snowthrower. The cautions and warnings
are for your safety. To avoid a personal injury or damage
to your snowthrower, understand and follow all the safety
decals.
If any safety decals become worn or damaged and cannot be
read, order replacement decals from your local dealer.
A — Part No. 1737865 Chute Danger Decal
B — Part No. 1739966 Auger Danger Decal
C — Part No. 279655 Choke / Control Warning Decal
A
C
Figure 1
B
Not for
Reproduction
10
Snowthrower Controls and
Operation Decals
(Figure 2)
A — Auger Control
B — Remote Chute Control
C
D — Electric Start Button
E — Power Cord Receptacle
F — Starting Instructions Decal / Steps 1-3
G — Starting Instructions Decal / Step 4 & 5
H — Headlight
Engine Controls
I
J — Fuel Tank and Cap
K — Oil Fill Cap (Extended Dipstick)
L — Primer Button
M
N — Starter Cord Handle
O — Oil Drain
1739977
Features and Controls
Figure 2
E
D
F
G
JI K
L
M
N
O
A
C
B
H
Not for
Reproduction
11
en
Operation
Check and Add Oil
NOTICE: The engine was shipped from the factory without
oil. Before you start the engine, make sure you add oil
according to the instructions in this manual. If you start the
engine without oil, it will be damaged beyond repair and will
not be covered under the warranty.
1. Make sure the unit is level. Use a high quality
detergent oil classified “For Service SG, SH, SJ, SL, or
higher”. Synthetic 5W30 motor oil is acceptable for all
temperatures. DO NOT mix oil with gasoline. See Chart
for oil recommendations.
2. Remove the oil fill cap/dipstick (A, Figure 3) and wipe
with a clean cloth.
3. Insert the cap/dipstick and turn clockwise to tighten.
4. Remove the oil fill cap/dipstick and check the oil.
5. If necessary, add oil until the level reaches the FULL
mark on the oil fill cap/dipstick. Do not overfill.
6. Tighten the cap/dipstick securely.
WARNING
The operation of any snowthrower can result in foreign objects being thrown into the eyes, which can result in
severe eye damage. Always wear safety glasses or eye shields before beginning snowthrower operation.
* Below 40°F (4°C) the use of SAE 30 will result in hard starting.
** Above 80°F (27°C) the use of 10W-30 may cause increased oil
consumption. Check oil level more frequently.
A
Figure 3
Not for
Reproduction
12
Operation
Fuel Recommendations
Fuel must meet these requirements:
High altitude use, see below.
NOTICE: Do not use unapproved gasoline, such as E85.
Do not mix oil in gasoline or modify the engine to run on
alternate fuels. This will damage the engine components
and void the engine warranty.
To protect the fuel system from gum formation, mix a fuel
stabilizer into the fuel. All fuel is not the same. If starting
or performance problems occur, change fuel providers
or change brands. This engine is certified to operate on
gasoline. The emissions control system for this engine is
EM (Engine Modifications).
High Altitude
At altitudes over 5,000 feet (1524 meters), a minimum
remain emissions compliant, high altitude adjustment is
required. Operation without this adjustment will cause
decreased performance, increased fuel consumption, and
increased emissions. See a Briggs & Stratton Authorized
Dealer for high altitude adjustment information.
Operation of the engine at altitudes below 2,500 feet
(762 meters) with the high altitude kit is not recommended.
Add Fuel
WARNING
Fuel and its vapors are extremely flammable
and explosive.
Fire or explosion can cause severe burns or
death.
When Adding Fuel
removing the fuel cap.
not fill above the bottom of the fuel tank neck.
and other ignition sources.
or leaks. Replace if necessary.
1. Clean the fuel cap area of dirt and debris. Remove the
fuel cap (A, Figure 4).
2. Fill the fuel tank with fuel. To allow for expansion of the
fuel, do not fill above the bottom of the fuel tank neck.
3. Reinstall the fuel cap.
A
Figure 4
Not for
Reproduction
13
en
Start the Engine
WARNING
The electric starter is equipped with a three-
wire power cord and plug designed to operate
on AC household current. The power cord
must be properly grounded at all times to avoid
the possibility of electric shock.
If your house does not have a three-wire grounded system, do
not use this electric starter. Contact a licensed electrician for
installation of a three-wire grounded system.
WARNING
Always connect the power cord first to the switch box located
on the equipment and then plug the other end into a grounded
receptacle. After starting, disconnect the power cord from the
grounded receptacle first.
Be sure that engine oil is at FULL mark on the oil fill cap/
dipstick. The snowthrower engine is equipped with an AC
electric starter and recoil starter. Before starting the engine,
be certain that you have read the following information.
If engine floods, set the choke to the OPEN/RUN position
and crank until the engine starts.
Start the engine as follows:
1. Check the oil level. See the Check and Add Oil
section.
2. Make sure auger control is disengaged.
3. Insert the ON/OFF key (A, Figure 5) and turn to the ON
position or insert the Push/Pull key, if equipped.
4. Turn the choke knob (B) fully clockwise if engine is cold.
NOTE: Do not use the choke to start a warm engine.
5. Push the primer button (C) two times.
NOTE: Do not use the primer to start a warm engine.
Operation
BC A
D
Figure 5
WARNING
Rapid retraction of the starter cord (kickback)
will pull your hand and arm toward the engine
faster than you can let go.
Broken bones, fractures, bruises, or sprains could result.
When starting engine, pull the starter cord slowly until
resistance is felt and then pull rapidly to avoid kickback.
6. Rewind Start: Firmly hold the starter cord handle
(D, Figure 5). Pull the starter cord handle slowly until
resistance is felt, then pull rapidly.
NOTE: If the engine does not start after three attempts,
see the Troubleshooting section.
Not for
Reproduction
14
Operation
WARNING
If the extension cord is damaged, it must be
replaced by the manufacturer (or its service
agent) or a similarly qualified person to avoid a
hazard.
7. Electric Start: First connect the extension cord (E,
Figure 6) to the power cord receptacle (F) and then
into a wall receptacle. If additional extension cord is
required, make sure it is three-wire.
8. Electric Start: Depress the starter push button (G).
After you start the engine, first disconnect the extension
cord from the wall receptacle and then from the power
cord receptacle.
Important: To extend the life of the starter, use short
starting cycles (five seconds maximum). Wait one
minute between starting cycles.
NOTE: If the engine does not start after three attempts,
see the Troubleshooting section.
E
F
G
Figure 6
Stop the Engine
WARNING
Gasoline and vapors are extremely flammable
and explosive. Fire or explosion can cause
severe burns or death. DO NOT choke the
carburetor to stop the engine.
Before stopping the engine, allow it to idle for a few minutes
to help dry off any moisture.
1. Turn the ON/OFF or Push/Pull key (A, Figure 7) to the
OFF position and remove or pullout the Push/Pull key if
equipped.
children. The engine cannot be started without the ON/
OFF or Push/Pull key.
A
Figure 7
Not for
Reproduction
15
en
Operation
Operate the Snowthrower
WARNING
Before operating, make sure the area in front
of the snowthrower is clear of bystanders or
obstacles.
DO NOT discharge snow toward a building as hidden
objects could be thrown with sufficient force to cause
damage.
1. Start the engine. See Start the Engine in this section.
2. Adjust the direction and angle of the discharge chute
(A, Figure 8). See Discharge Chute and Deflector in
this section.
3. Fully press and hold the auger control (B) to engage
the auger rotation. Releasing the auger control lever will
disengage the auger.
4. Push the unit into the snow.
NOTE: When clearing wet, heavy, snow, reduced your
speed, maintain full throttle, and clear less than the full
width of the unit.
5. Tip the handle bars (C) forward slightly. This will cause
the snowthrower to pull itself forward.
Figure 8
C
A
B
Not for
Reproduction
16
Operation
Stop the Snowthrower
WARNING
Read Operator’s Manual before operating machine. This
machine can be dangerous if used carelessly.
and shields in place.
near machine while engine is running.
housing or the discharge chute and before making repairs or
adjustments.
the risk of fire, keep the machine clean and free from spilled
gas, oil, and debris.
WARNING
Engines give off carbon monoxide, an
odorless, colorless, poison gas. Breathing
carbon monoxide can cause nausea, fainting,
or death.
windows are open.
1. Release the auger control (A, Figure 9).
2. Turn the ON/OFF switch (B) to the OFF position and
remove or pull out PUSH/PULL key.
Figure 9
Snowthrower Safety Test
DANGER
Never run engine indoors or in an enclosed,
poorly ventilated area. The discharge chute
contains a rotating auger to throw snow. Never
clear or unclog the discharge chute with your
hands.
Fingers can quickly become caught and traumatic amputation
or severe laceration will result. Always use a clean-out tool to
clear or unclog the discharge chute.
DANGER
Hand contact with the rotating auger inside the
discharge chute is the most common cause of
injury associated with snowthrowers.
feet, and throwing objects. Read and observe all the safety
instructions in this manual. Failure to do so will result in
death or serious injury.
Test - Auger/Impeller
1. Start unit and engage auger control (A, Figure 9).
2. Release auger control.
3. Auger must stop in 5 seconds or less.
A
B
Not for
Reproduction
17
en
17
Operation
Remote Chute Rotation
1. Squeeze and hold the button (A, Figure 10, inset) on
handle (B) of remote chute control.
2. Push the handle forward to rotate the chute (C)
counterclockwise or pull the handle backwards to rotate
the chute clockwise as shown on Figure 10.
3. Release the button to hold the desired chute location.
NOTE: Do not use excessive force when trying to
operate frozen controls. Clean off any snow and ice
from the base of the chute.
Figure 10
Clear a Clogged Discharge Chute
DANGER
Hand contact with the rotating impeller inside
the discharge chute is the most common
cause of injury associated with snowthrowers.
Never clear or unclog discharge chute with
your hands, or while engine is running.
Fingers can quickly become caught and traumatic amputation
or severe laceration can result.
1. SHUT OFF THE ENGINE!
2. Wait 10 seconds to be sure that the impeller blades
have stopped rotating.
3. Use a clean-out tool to remove snow from the auger
housing.
1. Squeeze the button (A, Figure 11) in the deflector
handle and adjust the deflector B) up or down to control
the snow discharge height and distance.
2. Release the button to hold the desired deflector
adjustment.
B
A
B
Figure 11
Operating Tips
1. Most efficient snow removal is accomplished when
snow is removed immediately after it falls.
2. For complete snow removal, slightly overlap each swath
previously taken.
3. Snow should be discharged downwind whenever
possible.
4. On gravel or crushed rock surfaces, push down slightly
on the handle bars to avoid ingesting rocks. DO NOT
allow rocks and gravel to be picked up and thrown from
snowthrower.
5. After the snow removal has been completed, allow the
engine to run for a few minutes, to melt accumulated
snow and ice.
6. Clean the snowthrower thoroughly after each use.
7. Before starting snowthrower, always inspect auger for
ice accumulation and/or debris, which could result in
snowthrower damage.
8. Check oil level before every start. Make sure the oil is at
the FULL mark on the oil fill cap/dipstick.
B
CA
Not for
Reproduction
18
Snowthrower
After Each Use
Remove accumulated snow and slush from the unit to prevent
freezing of controls
Every 8 Hours or Daily
Perform impeller safety tests
Every 25 Hours or Annually
Check snowthrower for loose hardware
Adjust auger control cable if necessary
See Dealer Annually to
Ensure rubber auger wear is not affecting performance
Engine
First 5 Hours
Change oil
Every 8 Hours or Daily
Check engine oil level
Every 50 Hours or Annually
Change engine oil
Check muffler and muffler guard.
Annually
Replace spark plug
Check valve clearance *
* Not required unless problems are noted with engine
performance. See authorized dealer.
Emissions Control Statement
Maintenance, replacement, or repair of the emissions
control devices and systems may be performed by any
non-road engine repair establishment or individual.
However, to obtain “no charge” emissions control service,
the work must be performed by a factory authorized dealer.
See the Emissions Warranty.
Maintenance
Change the Oil
Remove Oil
Used oil is a hazardous waste product and must be
disposed of properly. Do not discard with household waste.
Check with your local authorities, service center, or dealer
for safe disposal / recycling facilities.
1. With engine off but still warm, disconnect the spark plug
wire (A, Figure 12) and keep it away from the spark
plug.
NOTE: To access the spark plug wire, you must first
remove the snow hood from the engine. See Replace
the Spark Plug in this section.
A
Figure 12
2. Tilt the unit back slightly, then remove the oil drain cap
(B, Figure 13). Drain the oil into an approved receptacle.
3. After the oil has drained, install and tighten the oil drain
cap.
B
Figure 13
Maintenance Schedule
Not for
Reproduction
19
en
Maintenance
Add Oil
1. Place engine level.
2. Clean the oil fill area of any debris.
3. See Specifications section for oil capacity.
4. Remove the dipstick (C, Figure14) and wipe with clean
cloth.
5. Pour the oil slowly into the engine oil fill (D). DO NOT
overfill. Wait one minute and recheck the oil level.
6. Install and tighten dipstick.
7. Remove the dipstick and check the oil level. It should be
at the top of the full indicator (E) on the dipstick.
8. Install and tighten dipstick.
D
C
E
Figure 14
Access the Spark Plug
To access the spark plug, the snow hood must be removed
as follows:
1. Remove the ON/OFF key (A, Figure 15) or pull out the
from children.
2. Grasp the choke control (B) and pull up to remove.
3. Remove the mounting screws (C).
4. Carefully remove the top part of the snow hood (D). DO
NOT disconnect the primer hose (E) or the key wire (F).
5. Remove the spark plug (G) and replace (see
Specifications).
A
C
DE
F
G
B
I
H
Figure 15
6. Before installation of the snow hood, make sure the
primer hose and the key wire are connected.
7. Mount the top of the snow hood to the snow hood base.
Make sure the top interlocks with the base. Secure with
mounting screws .
8. Align the slots (H, Figure 15, Inset) in the choke knob
with the tabs on the choke shaft (I) and push down to
install. If knob is not installed correctly, the choke will
not operate.
9. DO NOT install the ON/OFF or Push/Pull key until you
are ready to start the engine.
Not for
Reproduction
20
Maintenance
C
B
A
Figure 16
Auger Cable Adjustment
WARNING
Do not over-tighten, as this may lift the lever and cause the
auger drive to be engaged without depressing the auger drive
control.
WARNING
The auger must stop within 5 seconds after releasing the
control. If it does not, see an authorized dealer.
If the auger no longer turns when the control is engaged,
or if the belt slips under load, the auger cable or belt may
have stretched. This can be compensated for by adjusting
the auger cable. If the belt is too worn or broken, see your
authorized dealer for repair.
NOTICE: The auger must not turn unless the auger control
is engaged. The auger must disengage within 5 seconds
after the auger control is released. If it does not, see your
authorized dealer before further use.
Inspection
1. Start the engine.
2. Engage the auger control. The auger should turn.
3. Release the auger control. The auger should stop within
5 seconds.
If the auger does not turn or stop as indicated above,
perform the adjustment procedure, or take the unit to your
local authorized dealer for repair.
Adjustment
1. Turn off the engine and remove the key. Wait for all
moving parts to stop.
2. Slide the cable cover (A, Figure 16) up to expose the
cable adjustment loops (B) and Z-bend (C).
3. Disengage the cable Z-bend from the cable loops, and
install it in the next highest loop to increase belt tension.
Slide the cable boot back into place.
NOTE: There must be some slack in the cable when the
control is released.
engine, and perform the Inspection procedure again. If
the auger does not turn or stop as indicated, take the
unit to your local authorized dealer for repair.
Not for
Reproduction
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
Simplicity 1695882 Manuel utilisateur
- Catégorie
- Souffleuses à neige
- Taper
- Manuel utilisateur
- Ce manuel convient également à
dans d''autres langues
- English: Simplicity 1695882 User manual
Documents connexes
-
Simplicity 1696491-01 Manuel utilisateur
-
-
-
-
Legend Force 1697292-00 Mode d'emploi
-
-
-
Legend Force 1697348 Manuel utilisateur
-
Briggs & Stratton 1696273-02 Manuel utilisateur
-
