Savant SVTFC22440LBE200 Deployment Guide

1

Part no. 209-1351

rev. 06/30/20

Framed Cabinets

Armoires encadrées

Gabinetes enmarcados

www.savant.com

savantsupport@savant.com

1-877-SAVANT5

(1-877-728-2685)

All designs protected by copyright

Covered by US Patents. Patents pending

FRAMED CABINET

General Information - 1

Tools Needed - 2

Parts - 2

Notes - 3

Model Numbers - 3

Dimensions - 4

Removing the Door for ease

of Installation - 5

Electric Connections - 5

Option 1 - 7

Option 2 - 8

Recess Mounting - 9

Surface Mounting - 11

Final Assembly - 14

Use and Maintenance - 16

Warranty - 16

This instruction sheet contains information on how to install the Framed Cabinets. This series comes in various sizes.

Refer to specic model numbers for dimensions. Read the specic instruction for how your cabinet will be mounted. The cabinets

can be surface mounted or recess mounted.

Save these instructions for future use and reference.

An improper installation voids the warranty. Installed cabinets cannot be returned. If you experience any problems with your cabinet,

contact your dealer or Robern directly.

WARNING: Magnetic Accessory Tool Holder can be harmful to pacemaker wearers and others with medical implants.

Limited Warranty — One Year Term

Important safety instructions - Save these instructions

CONTENTS

GENERAL INFORMATION

1230D4 NON ELEC

1630D4 NON ELEC

2030D4 NON ELEC

2430D4 NON ELEC

1230D6 NON ELEC

2030D6 NON ELEC

2430D6 NON ELEC

1630D6 NON ELEC

2

Part no. 209-1351

rev. 06/30/20

Framed Cabinets

Armoires encadrées

Gabinetes enmarcados

www.savant.com

savantsupport@savant.com

1-877-SAVANT5

(1-877-728-2685)

All designs protected by copyright

Covered by US Patents. Patents pending

TOOLS NEEDED

PARTS

(1) Framed Cabinet (3-4)

Glass Shelf

1230D4 NON ELEC

1630D4 NON ELEC

2030D4 NON ELEC

2430D4 NON ELEC

1230D6 NON ELEC

2030D6 NON ELEC

2430D6 NON ELEC

1630D6 NON ELEC

(30")MSMK30D4P, (40")MSMK40D4P, (48")MSMK48D4P

Optional for surface mounting

(2) Z Mounting Bars

(2) Glass Side Panel

[203-1349]

(6) Wall Anchors

[SS712]

(3) Top Clip

[SS676]

(12) #10 x 1/2 Screw

[SS672]

(12) Screw Cap

[SS674]

(6) #10 x 2" Screw

[SS131]

(16 / 32) Shelf Clip

[SS134]

(50 / 100) Hole Plug

[SS672]

(6 / 12) Screw Cap

[216-1096]

Hardware Bag

[SS666]

(3) Hinge Clip

[SS674]

(6) #10 x 2" Screw

[205-1784]

Magnetic Accessory Tool Holder

3

Part no. 209-1351

rev. 06/30/20

Framed Cabinets

Armoires encadrées

Gabinetes enmarcados

www.savant.com

savantsupport@savant.com

1-877-SAVANT5

(1-877-728-2685)

All designs protected by copyright

Covered by US Patents. Patents pending

When using an electrical furnishing, basic precautions should always be followed, including the following:

DANGER: Read all instructions before using this cabinet.

WARNING: To reduce the risk of burns, re, electric shock, or injury to persons: Use this furnishing only for its

intended use as described in these instructions. Do not use attachments not recommended by the manufacturer. Never drop or insert

any object into any opening. Do not use outdoors.

WARNING: Risk of electric shock. Connect this furnishing to a properly grounded circuit only.

See Grounding instructions.

CAUTION: Maximum shelf load 34lbs/15.4kg

GROUNDING INSTRUCTIONS: This product must be connected to a grounded metal,

permanent wiring system, or an equipment-grounding conductor must be run with the circuit conductors and connected to the

equipment-grounding terminal or lead on the product.

WARNING: An Electrical option cabinet must be wired to a 20 Amp GFI (Ground Fault Interrupter) protected circuit

when used in bathrooms and all other locations required by the National Electric Code.

NOTES

4

Part no. 209-1351

rev. 06/30/20

Framed Cabinets

Armoires encadrées

Gabinetes enmarcados

www.savant.com

savantsupport@savant.com

1-877-SAVANT5

(1-877-728-2685)

All designs protected by copyright

Covered by US Patents. Patents pending

PC1230D4 PC1630D4 PC2030D4 PC2430D4 PC1240D4 PC1640D4 PC2040D4 PC2440D4 PC1648D4 PC2048D4 PC2448D4 PC1230D6 PC1630D6 PC2030D6 PC2430D6 PC1240D6 PC1640D6 PC2040D6 PC2440D6

A

11-1/4"

(286 mm)

15-1/4"

(387 mm)

19-1/4"

(489 mm)

23-1/4"

(591 mm)

11-1/4"

(286 mm)

15-1/4"

(387 mm)

19-1/4"

(489 mm)

23-1/4"

(591 mm)

15-1/4"

(387 mm)

19-1/4"

(489 mm)

23-1/4"

(591 mm)

11-1/4"

(286 mm)

15-1/4"

(387 mm)

19-1/4"

(489 mm)

23-1/4"

(591 mm)

11-1/4"

(286 mm)

15-1/4"

(387 mm)

19-1/4"

(489 mm)

23-1/4"

(591 mm)

B 30" (762 mm) 39-3/8" (1000 mm) 48" (1219 mm) 30" (762 mm) 39-3/8" (1000 mm)

RO (A)

10-1/2"

(267 mm)

14-1/2"

(368 mm)

18-1/2"

(470 mm)

22-1/2"

(572 mm)

10-1/2"

(267 mm)

14-1/2"

(368 mm)

18-1/2"

(470 mm)

22-1/2"

(572 mm)

14-1/2"

(368 mm)

18-1/2"

(470 mm)

22-1/2"

(572 mm)

10-1/2"

(267 mm)

14-1/2"

(368 mm)

18-1/2"

(470 mm)

22-1/2"

(572 mm)

10-1/2"

(267 mm)

14-1/2"

(368 mm)

18-1/2"

(470 mm)

22-1/2"

(572 mm)

RO (B) 29-1/4" (743 mm) 38-5/8" (981 mm) 47-1/4" (1200 mm) 29-1/4" (743 mm) 38-5/8" (981 mm)

D 4-11/16" (119 mm) 6-5/8" (168 mm)

E 4" (102 mm) 6" (152 mm)

F 4-5/16" (110 mm) 9-3/4" (248 mm) 4-5/16" (110 mm) 9-3/4" (248 mm)

4-5/16"

(110 mm)

9-3/4" (248 mm) 4-5/16" (110 mm) 9-3/4" (248 mm) 4-5/16" (110 mm) 9-3/4" (248 mm)

G 6-5/8" (168 mm) 5-3/4" (146 mm) 6-5/8" (168 mm) 5-3/4" (146 mm)

6-5/8"

(168 mm)

5-3/4" (146 mm) 6-5/8" (168 mm) 5-3/4" (146 mm) 6-5/8" (168 mm) 5-3/4" (146 mm)

DIMENSIONS

Determine overall cabinet dimensions. If recessing cabinet, determine rough-in dimensions. See chart for specic model dimensions.

A

B

D

Isometric View

Back View

Side View

Wire Access Hole

15/16"

(24 mm)

F

E

Rough Opening (RO) for recessed installation in chart below

D4 = minimum 4“ required or 2X4 construcon

D6 = minimum 6“ required or 2X6 construcon

G

5

Part no. 209-1351

rev. 06/30/20

Framed Cabinets

Armoires encadrées

Gabinetes enmarcados

www.savant.com

savantsupport@savant.com

1-877-SAVANT5

(1-877-728-2685)

All designs protected by copyright

Covered by US Patents. Patents pending

To remove, while supporting the door, release the lever under the hinge arm. Slide the door off and store in a safe place.

All wiring should be done by a qualied licensed electrician.

WARNING: To reduce the risk of electrical shock, shut off power before wiring the cabinet.

CAUTION: Requires 120 VAC 20 Amp GFI protected circuit.

CAUTION: This product must be connected to a grounded, metal permanent wiring system or an equipment-grounding conductor must

be run with the circuit conductors and connected to the equipment grounding terminal or lead on the product.

WARNING: An Electrical option cabinet must be wired to a 20 Amp GFI (Ground Fault Interrupter) protected circuit when used in

bathrooms and all other locations required by the National Electric Code. Make eld connections as per wiring diagram for the electrical

option being installed.

REMOVING THE DOOR FOR EASE OF INSTALLATION

ELECTRIC CONNECTIONS

CIRCUIT BREAKER

DISJONCTEUR

CORTACICUITOS

WHITE

BLANC

BLANCO

GROUND

MISE À LA TERRE

BAJADA A TIERRA

BLACK

NOIR

NEGRO

WHITE

BLANC

BLANCO

GROUND

MISE À LA TERRE

BAJADA A TIERRA

BLACK

NOIR

NEGRO

FIELD CONNECTION

CONNEXION DE CHAMP

CONNEXIÓN DE CAMPO

120VAC

20A GFI

AiO Cabinet with or without OM™ Audio

AiO Cabinet avec ou sans OM™ Audio

Gabinete AiO con o sin OM™ Audio

LINE/BLACK

LIGNE/NOIR

LINEA/NEGRO

NEUTRAL/WHITE

NEUTRE/BLANC

NEUTRAL/BLANCO

Determine overall cabinet dimensions. If recessing cabinet, determine rough-in dimensions. See chart for specic model dimensions.

Framed Cabinet

6

Part no. 209-1351

rev. 06/30/20

Framed Cabinets

Armoires encadrées

Gabinetes enmarcados

www.savant.com

savantsupport@savant.com

1-877-SAVANT5

(1-877-728-2685)

All designs protected by copyright

Covered by US Patents. Patents pending

ELECTRIC CONNECTIONS

TWO options for cabinet wiring are available. Select the best option to make your installation easier.

Option 1: Connecting the FIELD/POWER wires at the rear of the cabinet.

Removing a small cover on the back of the cabinet allows FIELD/POWER wires to be fully connected through an access on the

rear of the cabinet. The cabinet is fully wired before mounting in/on the wall.

Option 2: Connecting the FIELD/POWER wires inside the cabinet.

Removing the electronic shelf cover inside the cabinet allows the FIELD/POWER wires to be connected inside the cabinet.

Removal of the interior electrical shelf cover is required. The cabinet can be fully wired after mounting in/ on the wall.

Option 1

See page 9

Option 2

See page 10

OR

7

Part no. 209-1351

rev. 06/30/20

Framed Cabinets

Armoires encadrées

Gabinetes enmarcados

www.savant.com

savantsupport@savant.com

1-877-SAVANT5

(1-877-728-2685)

All designs protected by copyright

Covered by US Patents. Patents pending

OPTION 1

ELECTRIC CONNECTIONS

1. Remove the access screws from the plate located on the back of the cabinet. Remove rear plate to access wires.

2. Carefully cut plastic tie before making the connections.

3. Feed the electric wire through the access hole in the plate as shown.

31

4

2

5

White

Black

Ground

Field Wire

4" MAX

102 mm MAX

4. Make connections. Neutral to white or ribbed. Line to black or smooth. Ground to green.

5. Reinstall rear access plate.

8

Part no. 209-1351

rev. 06/30/20

Framed Cabinets

Armoires encadrées

Gabinetes enmarcados

www.savant.com

savantsupport@savant.com

1-877-SAVANT5

(1-877-728-2685)

All designs protected by copyright

Covered by US Patents. Patents pending

1. Remove the access screws in bottom of the outlet shelf. Lift up and remove outlet shelf for access to electrical connections.

2. Carefully cut plastic tie before making the connections.

3. Feed the electric wire through the access hole in the back of the cabinet.

OPTION 2

ELECTRIC CONNECTIONS

31

4

2

5 6

WhiteBlack

Ground

Field Wire

4" MAX

102 mm MAX

4. Make connections. Neutral to white or ribbed. Line to black or smooth. Ground to green.

5. Engage top of electrical shelf into back raceway and rotate down to close, making sure not to crimp or pinch wires and connections.

6. Replace two access screws on outlet shelf.

9

Part no. 209-1351

rev. 06/30/20

Framed Cabinets

Armoires encadrées

Gabinetes enmarcados

www.savant.com

savantsupport@savant.com

1-877-SAVANT5

(1-877-728-2685)

All designs protected by copyright

Covered by US Patents. Patents pending

These instructions are for recess mounting your cabinet. Remove and store door with cardboard sleeve prior to installation.

1. Make rough opening and frame on all sides. Find the specic model dimensions to make rough opening (page 5). Make sure cabinet

door is at least 1” (25 mm) clearance to the top of the faucet and at least 1” from the ceiling.

2. Electrical eld wiring: Pull electric wire through the hole. Be sure to provide enough wire to make proper and safe connections to

outlet shelf. See page 7 for electrical connection instructions. See page 8 for electrical connection options.

RECESS MOUNTING

1 2

Field Wiring

1" (25.4 mm)

Minimum Door to Faucet

Rough Opening

1" (25.4 mm)

Minimum from Finished Ceiling

F

G

F

G

12" Cabinet

4-5/16"

(110 mm)

6-5/8"

(168 mm)

9-3/4"

(248 mm)

5-3/4"

(146 mm)

20" Cabinet

16" Cabinet

24" Cabinet

10

Part no. 209-1351

rev. 06/30/20

Framed Cabinets

Armoires encadrées

Gabinetes enmarcados

www.savant.com

savantsupport@savant.com

1-877-SAVANT5

(1-877-728-2685)

All designs protected by copyright

Covered by US Patents. Patents pending

RECESS MOUNTING

3. Place cabinet in rough-in and make sure cabinet is plumb and level.

4. Install a #10 X 2” (SS674) screw through top mounting hole in cabinet and screw into wall stud as shown. Do not over tighten screw.

5. Once cabinet is plumb and level, install #10 X 2” (SS674) remaining screws into wall stud. Go to page 14 for nal assembly.

3

4

5

#10 X 2” (51 mm)

[SS674]

11

Part no. 209-1351

rev. 06/30/20

Framed Cabinets

Armoires encadrées

Gabinetes enmarcados

www.savant.com

savantsupport@savant.com

1-877-SAVANT5

(1-877-728-2685)

All designs protected by copyright

Covered by US Patents. Patents pending

All parts required for surface mounting are included in the optional kit (see page 2). These instructions are for surface mounting.

Remove and store door with cardboard sleeve prior to installation.

1. It is strongly recommended that the wall be framed behind the drywall or tile.

2. Electrical eld wiring: Electrical feed through location is indicated below. See page 5 for location. See page 7 for electric connection.

Make sure cabinet is at least 1” (25.4 mm) clearance to the top of the faucet and at least 1” from the ceiling.

SURFACE MOUNTING

21

Field Wiring

1" (25.4 mm)

Minimum door to faucet

1" (25.4 mm)

Minimum from nished ceiling

F

G

F

G

12" Cabinet

4-5/16"

(110 mm)

6-5/8"

(168 mm)

9-3/4"

(248 mm)

5-3/4"

(146 mm)

20" Cabinet

16" Cabinet

24" Cabinet

12

Part no. 209-1351

rev. 06/30/20

Framed Cabinets

Armoires encadrées

Gabinetes enmarcados

www.savant.com

savantsupport@savant.com

1-877-SAVANT5

(1-877-728-2685)

All designs protected by copyright

Covered by US Patents. Patents pending

SURFACE MOUNTING

3. Center Z-mounting bar at cabinet location. Make sure Z-mounting bar is at least 1” (25 mm) above xtures.

5b

3

4 5a

5/16"

(8 mm)

203-1349

SS674

1" (25.4 mm)

Minimum

Z Mounting Bar

1" x 3"

#10 x 2"

(51 mm)

[SS674]

7/32"

(5.5 mm)

1" (25.4 mm)

Minimum

Drill Here

4. Locate and drill three 7/32” (5.5 mm) holes through the indent line on the mounting bar. Be sure the mounting bar is level. Make sure

Z mounting bar is centered.

5a. Use three #10 X 2” (SS674) screws provided to attach the Z-mounting bar mounting strip to the wall.

5b. If no furring strip or stud is available, use the supplied plastic anchors, making sure that each cabinet is supported by at least 3

anchors. Drill a 5/16” (8 mm) hole for wall anchors and insert the wall anchor into hole until the anchor ange is ush with the wall.

5c. Use the #10 screw and tighten screw until there is a strong resistance. DO NOT OVER TIGHTEN.

13

Part no. 209-1351

rev. 06/30/20

Framed Cabinets

Armoires encadrées

Gabinetes enmarcados

www.savant.com

savantsupport@savant.com

1-877-SAVANT5

(1-877-728-2685)

All designs protected by copyright

Covered by US Patents. Patents pending

6. Slide the three “Z” clips into the screw channel at the top of the cabinet; be sure that the “Z” clips lock into the grooves.

7. Lift the cabinet and place the cabinet onto the Z mounting bar.

8. Using the #10 X 2” (51 mm) screws provided, attach the top of the cabinet to the wall through the top clips as shown. If no stud is

available, use wall anchors as described in step 5b.

SURFACE MOUNTING

7

8-[SS672]

8-[SS676]

9 10

3x

6

#10 X 2” (51 mm)

[SS674]

8

9. Electric: See page 7 for electrical connection instructions. See Page 8 for electrical connection options.

10. Attach Optional Side Kit (sold separately) to cabinet using supplied screws from inside cabinet box into Side Kit. Test the t of the

cabinet before completing installation. Cap the screws with the screw caps provided. Go to page 14 for nal assembly.

14

Part no. 209-1351

rev. 06/30/20

Framed Cabinets

Armoires encadrées

Gabinetes enmarcados

www.savant.com

savantsupport@savant.com

1-877-SAVANT5

(1-877-728-2685)

All designs protected by copyright

Covered by US Patents. Patents pending

FINAL ASSEMBLY

1A-B. Mount the doors by pinching the end of the hinge as shown in image 1A. If the installation requires, attach the included hinge

clips [SS666] over the elbow of the hinges to stop door swing radius at 110°.

1B

1A1A

2A

2B

2A-B. The cabinet doors have a three-way adjustment feature. Height, side-to-side level, and depth can all be adjusted using a #2

Phillips Head screwdriver. With the hinge slightly closed, you can access the middle screw. This screw will move your door front up and

down (see gure 5A). With the hinge fully extended, you can access the front and back screws. These screws will move your door front

from side to side and in and out (see gure 2B).

15

Part no. 209-1351

rev. 06/30/20

Framed Cabinets

Armoires encadrées

Gabinetes enmarcados

www.savant.com

savantsupport@savant.com

1-877-SAVANT5

(1-877-728-2685)

All designs protected by copyright

Covered by US Patents. Patents pending

3. Insert clear snap-in Shelf Clips into the holes on the sides of the cabinet.

4. Push one side of the shelf into the left or right clip. Snap the shelf down into the opposite side. If the shelf is too tight, repeat the

process starting from the opposite side.

5. Press the shelf hole plugs into the unused holes inside the cabinet. Place the screw head caps over any exposed screw heads.

FINAL ASSEMBLY

[SS672]

[SS134]

3 4 5

(12)

[SS131]

NOTE: Do not store items in the cabinet area directly behind the hinge, as damage may occur to cabinet or items.

16

Part no. 209-1351

rev. 06/30/20

Framed Cabinets

Armoires encadrées

Gabinetes enmarcados

www.savant.com

savantsupport@savant.com

1-877-SAVANT5

(1-877-728-2685)

All designs protected by copyright

Covered by US Patents. Patents pending

USE AND MAINTENANCE

CAUTION: Maximum shelf load 34 LBS.

The cabinet door and interior are constructed of mirrored glass and aluminum. Use only a damp cloth to clean. Ammonia or vinegar

based cleaners can damage mirrors.

A 50/50 solution of water and isopropyl alcohol is recommended for cleaning the mirrors. A mild detergent may be used on the surfaces.

When cleaning, spray the cloth, not the cabinet, mirror, or surround surfaces.

Do not use abrasive cleansers on any part of the light xture.

No Ammonia

Sans Ammoniac

Sin Amoniaco

No Vinegar

Sans Vinaigre

Sin Vinagre

No Ammonia

No Vinegar

WARRANTY

Limited Warranty One Year Term

ROBERN warrants to the original purchaser that, it will, at its election repair, replace, or make appropriate adjustment to products

made by this company shown to have signicant defects in material or workmanship which are reported to ROBERN in writing

within one (1) year from the date of delivery. ROBERN is not responsible for installation costs. The warranty is void in the event the

product is damaged in transit, or if damage or failure is caused by abuse, misuse, abnormal usage, faulty installation, damage in an

accident, improper maintenance, or any repairs other than those authorized by ROBERN. At the expiration of the one year warranty

period, ROBERN shall be under no further obligation under any warranty, expressed or implied, including the implied warranty of

merchantability. ROBERN shall not be liable for any consequential damages arising out of or in connection with the use or performance

of its products. Some states do not allow limitations on how long an implied warranty lasts or do not allow the exclusion or limitation of

incidental or consequential damages, so the above limitation or exclusion may not apply to you. Any liability against ROBERN under

any implied warranty, including the warranty of merchantability, is expressly limited to the terms of this warranty. Permission to return

any merchandise under this warranty must be authorized by ROBERN and returned prepaid by the purchaser. Claims under this

warranty should be sent directly to your dealer.

17

Part no. 209-1351

rev. 06/30/20

Framed Cabinets

Armoires encadrées

Gabinetes enmarcados

www.savant.com

savantsupport@savant.com

1-877-SAVANT5

(1-877-728-2685)

All designs protected by copyright

Covered by US Patents. Patents pending

Information Générale – 17

Outils Nécessaires – 18

Pièces – 18

Remarques – 19

Numéros de Modèle – 19

Dimensions – 20

Retrait de la Porte Pour

Faciliter L’installation – 21

Raccordements Électriques – 21

Option 1 – 23

Option 2 – 24

Montage Encastré – 25

Montage En Surface – 27

Assemblage Final – 30

Garantie – 32

Utilisation et Entretien – 32

Información General – 17

Herramientas Necesarias – 18

Piezas – 18

Notas – 19

Números de Modelo – 19

Dimensiones – 20

Extracción de la Puerta Para

Facilitar La Instalación – 21

Conexiones Eléctricas – 21

Opción 1 – 23

Opción 2 – 24

Montaje Empotrado – 25

Montaje En Supericie – 27

Ensamblado Final – 30

Garantía – 32

Uso y Mantenimiento – 32

C Ce feuillet d’instructions contient des informations sur la façon d’installer les

armoires de la Proles framed. Cette série est disponible en différentes tailles.

Reportez-vous aux numéros de modèles spéciques pour les dimensions.

Lisez les instructions spéciques pour faire votre armoire sera monté. Les

armoires peuvent être montés en surface, évidement monté ou.

Conservez ces instructions pour l’utilisation et la référence future. Un

inappropriées annule la garantie de l’installation. Cabinets installés ne

peuvent être retournés.

Si vous rencontrez des problèmes avec votre cabinet, contactez votre revendeur

ou directement Robern.

AVERTISSEMENT: porte-outil accessoire magnétique peuvent être nocifs pour

les porteurs de stimulateurs cardiaques et autres implants médicaux avec.

Garantie limitée - UN AN

Esta hoja de instrucciones contiene información sobre cómo instalar los

gabinetes de la Proles framed. Esta serie viene en varios tamaños. Consulte

el número de modelo especíco para las dimensiones.

Lea las instrucciones especícas de cómo se va a montar el gabinete. Los

gabinetes pueden montarse en la supercie o empotrados.

Guarde estas instrucciones para su uso y referencia futura. Una instalación

incorrecta anula la garantía. Gabinetes instalados no se pueden devolver.

Si experimenta algún problema con su gabinete, póngase en contacto con su

distribuidor o Robern directamente.

ADVERTENCIA: Magnetic Holder herramientas de accesorios pueden ser

perjudiciales para las personas con marcapasos y otros implantes médicos.

Garantía limitada - un término del año

FRAMED CABINET

FRAMED GABINETE

Instrucciones de seguridad importantes - Guarda estas instrucciones

Consignes de sécurité importantes - Enregistrez ces instructions

TABLE DES MATIÈRES

INFORMATION GÉNÉRALE

CONTENIDO

INFORMACIÓN GENERAL

1230D4 NON ELEC

1630D4 NON ELEC

2030D4 NON ELEC

2430D4 NON ELEC

1230D6 NON ELEC

2030D6 NON ELEC

2430D6 NON ELEC

1630D6 NON ELEC

18

Part no. 209-1351

rev. 06/30/20

Framed Cabinets

Armoires encadrées

Gabinetes enmarcados

www.savant.com

savantsupport@savant.com

1-877-SAVANT5

(1-877-728-2685)

All designs protected by copyright

Covered by US Patents. Patents pending

OUTILS NÉCESSAIRES HERRAMIENTAS NECESARIAS

PIÈCES PIEZAS

(1) Porte simple Framed Cabinet

(3-4) Tablette en Verre

1230D4 NON ELEC

1630D4 NON ELEC

2030D4 NON ELEC

2430D4 NON ELEC

1230D6 NON ELEC

2030D6 NON ELEC

2430D6 NON ELEC

1630D6 NON ELEC

(1) Una sola puerta de Framed Gabinete

(3-4) Estante de Vidrio

1230D4 NON ELEC

1630D4 NON ELEC

2030D4 NON ELEC

2430D4 NON ELEC

1230D6 NON ELEC

2030D6 NON ELEC

2430D6 NON ELEC

1630D6 NON ELEC

(30")MSMK30D4P, (40")MSMK40D4P, (48")MSMK48D4P

Optionnel pour un montage en surface /

Opcional para montaje en supercie

(2) Barre de Montage en Z /

Barra de Montaje en Z

(2) Panneau Latéral de Verre /

Panel Lateral de Vidrio

[203-1349]

(6) Ancrages Muraux /

Ancla de Pared

[SS712]

(3) Top Clip /

Top Clip

[SS676]

(12) #10 x 1/2 Hélice /

#10 x 1/2 Tornillo

[SS672]

(12) Bouchon de Vis /

Tapa a Rosca

[SS674]

(6) 51 mm Hélice /

51 mm Tornillo

[SS131]

(16/32) Plateau Clip /

Estante Clip

[SS134]

(50/100) Bouchon pour Trou /

Tapón para los Agujeros

[SS672]

(6/12) Bouchon de Vis /

Tapa a Rosca

Sac De Quincaillerie / Bolsa De Accesorios

[SS666]

(3) Pinces pour Pharnières /

Sujetadores de Bisagra

[SS674]

(6) 51 mm Hélice /

51 mm Tornillo

[205-1784]

Magnetic Holder Accessoire Outillage /

Magnetic Holder de Accesorios Para Herramientas

19

Part no. 209-1351

rev. 06/30/20

Framed Cabinets

Armoires encadrées

Gabinetes enmarcados

www.savant.com

savantsupport@savant.com

1-877-SAVANT5

(1-877-728-2685)

All designs protected by copyright

Covered by US Patents. Patents pending

REMARQUES NOTAS

Lors de l'utilisation d'un meuble électrique, des précautions de base doivent

toujours être suivies, notamment les suivantes:

DANGER: Lisez toutes les instructions avant d'utiliser cette armoire.

AVERTISSEMENT: Pour réduire le risque de brûlures,

d'incendie, de choc électrique ou de blessures corporelles: n'utilisez ce meuble

que pour l'usage auquel il est destiné, comme décrit

dans ces instructions. N'utilisez pas d'accessoires non recommandés par le

fabricant. Ne laissez jamais tomber ou n'insérez aucun objet dans une ouverture.

Ne pas utiliser à l'extérieur.

AVERTISSEMENT: Risque de choc électrique. Connectez

ce meuble à un circuit correctement mis à la terre uniquement.

Voir les instructions de mise à la terre.

AVERTISSEMENT: TABLETTE POIDS MAX 15.4 KGS.

INSTRUCTIONS DE MISE À LA TERRE:

Ce produit doit être connecté à un métal mis à la terre, un système de câblage

permanent, ou un conducteur de mise à la terre de l'équipement doit être utilisé

avec les conducteurs du circuit et connecté à la borne de mise à la terre de

l'équipement ou au l du produit.

AVERTISSEMENT: Une armoire à option électrique doit

être câblée à un circuit protégé par un GFI (disjoncteur de fuite de terre) de

20 ampères si elle est utilisée dans des salles de bain et dans tous autres

emplacements requis par le National Electric Code (Code électrique national).

Cuando se utiliza un mobiliario eléctrico, siempre se deben seguir las

precauciones básicas, incluidas las siguientes:

PELIGRO: Lea todas las instrucciones antes de usar este gabinete.

ADVERTENCIA: Para reducir el riesgo de quemaduras,

incendio, descarga eléctrica o lesiones a las personas: use este mobiliario

solo para el uso previsto como se describe en estas instrucciones No utilice

accesorios no recomendados por el fabricante. Nunca deje caer ni inserte

ningún objeto en ninguna abertura. No utilizar al aire libre.

ADVERTENCIA: Riesgo de descarga eléctrica. Conecte

este mobiliario solo a un circuito debidamente conectado a tierra.

Consulte las instrucciones de conexión a tierra.

PRECAUCIÓN: Carga máxima en el estante 15.4 kg

INSTRUCCIONES DE CONEXIÓN

A TIERRA: Este producto debe conectarse a un sistema de cableado

permanente conectado a tierra de metal, o un conductor de conexión a tierra

del equipo debe funcionar con los conductores del circuito y conectado a la

terminal de conexión a tierra del equipo o al cable del producto.

ADVERTENCIA: Un gabinete de opciones eléctricas debe

conectarse a un circuito protegido de 20 amp GFI (interruptor de falla a tierra)

cuando se usa en baños y en todas las demás ubicaciones requeridas por el

Código Eléctrico Nacional.

20

Part no. 209-1351

rev. 06/30/20

Framed Cabinets

Armoires encadrées

Gabinetes enmarcados

www.savant.com

savantsupport@savant.com

1-877-SAVANT5

(1-877-728-2685)

All designs protected by copyright

Covered by US Patents. Patents pending

PC1230D4 PC1630D4 PC2030D4 PC2430D4 PC1240D4 PC1640D4 PC2040D4 PC2440D4 PC1648D4 PC2048D4 PC2448D4 PC1230D6 PC1630D6 PC2030D6 PC2430D6 PC1240D6 PC1640D6 PC2040D6 PC2440D6

A

11-1/4"

(286 mm)

15-1/4"

(387 mm)

19-1/4"

(489 mm)

23-1/4"

(591 mm)

11-1/4"

(286 mm)

15-1/4"

(387 mm)

19-1/4"

(489 mm)

23-1/4"

(591 mm)

15-1/4"

(387 mm)

19-1/4"

(489 mm)

23-1/4"

(591 mm)

11-1/4"

(286 mm)

15-1/4"

(387 mm)

19-1/4"

(489 mm)

23-1/4"

(591 mm)

11-1/4"

(286 mm)

15-1/4"

(387 mm)

19-1/4"

(489 mm)

23-1/4"

(591 mm)

B 30" (762 mm) 39-3/8" (1000 mm) 48" (1219 mm) 30" (762 mm) 39-3/8" (1000 mm)

RO (A)

10-1/2"

(267 mm)

14-1/2"

(368 mm)

18-1/2"

(470 mm)

22-1/2"

(572 mm)

10-1/2"

(267 mm)

14-1/2"

(368 mm)

18-1/2"

(470 mm)

22-1/2"

(572 mm)

14-1/2"

(368 mm)

18-1/2"

(470 mm)

22-1/2"

(572 mm)

10-1/2"

(267 mm)

14-1/2"

(368 mm)

18-1/2"

(470 mm)

22-1/2"

(572 mm)

10-1/2"

(267 mm)

14-1/2"

(368 mm)

18-1/2"

(470 mm)

22-1/2"

(572 mm)

RO (B) 29-1/4" (743 mm) 38-5/8" (981 mm) 47-1/4" (1200 mm) 29-1/4" (743 mm) 38-5/8" (981 mm)

D 4-11/16" (119 mm) 6-5/8" (168 mm)

E 4" (102 mm) 6" (152 mm)

F 4-5/16" (110 mm) 9-3/4" (248 mm) 4-5/16" (110 mm) 9-3/4" (248 mm)

4-5/16"

(110 mm)

9-3/4" (248 mm) 4-5/16" (110 mm) 9-3/4" (248 mm) 4-5/16" (110 mm) 9-3/4" (248 mm)

G 6-5/8" (168 mm) 5-3/4" (146 mm) 6-5/8" (168 mm) 5-3/4" (146 mm)

6-5/8"

(168 mm)

5-3/4" (146 mm) 6-5/8" (168 mm) 5-3/4" (146 mm) 6-5/8" (168 mm) 5-3/4" (146 mm)

DIMENSIONS

Déterminez les dimensions globales de l’armoire. Pour une

armoire encastrée, déterminer les dimensions brutes. Voir le

tableau pour les dimensions spéciques selon le modèle.

A

B

D

Vista Isométrica

Vue isométrique

Vista trasera

Vue arrière

Vista lateral

Vue de côté

15/16"

(24 mm)

E

Ouverture Brute (RO) pour installation encastrée dans le tableau ci-dessous /

Apertura Áspera (RO) para instalación empotrada en la siguiente tabla Profundidad Del Empotrado

D4 = 4” minimum requis ou construcon de 2X4 / D4 = 4” (102 mm) como mínimo requeridas o construcción 2X4

D6 = 6” minimum requis ou construcon de 2X6 / D6 = 6” (152 mm) como mínimo requeridas o construcción 2X6

DIMENSIONES

Determinar gabinete y las dimensiones de. Si empotrar

gabinete, determinar las dimensiones toscamente en. Vea la

tabla para las dimensiones especícas del modelo.

Câble Trou D’Accès /

Cable Oricio de Entrada

F

G

La page charge ...

Savant SVTFC22440LBE200 Deployment Guide

Savant SVTFC22440LBE200 Deployment Guide

dans d''autres langues

Documents connexes

Autres documents