TECHNICAL FILE
R03.001_25/06/2010
Novonivel® Forte is a transition prole with wide face side, whose
surface has been striated to offer better resistance to slip. Its
reinforced base, allows it to support loads and a high level of transit.
This prole is made of anodized aluminium, which makes it suitable
to its placement outdoors or indoors. Novonivel® Forte helps to
fulll with the DB-SUA from CTE (Building technical code) and it is
available in matt silver.
Novonivel® Forte
Material: Anodized aluminium
Lenght: 8ft2in / 2,5 m.l.
Dimensions: h: 1/2” / 12 mm.
a: 3-51/64” / 96,4 mm.
Packaging: 10 u/box
Finishes: 13 - Matt silver
Applications
Novonivel® Forte is a prole designed to its placement in pavements, to avoid discontinuities safely. This
prole has a wide non-slip face side and it is suitable for pedestrian or trafc. Some of its applications,
for example, are:
- Discontinuities in pavements outdoors or indoors.
- Entrances of garages
- Entrances of stablishments
- Public places.
Novonivel® Forte helps to fulll the DB-SUA document from CTE (Building Technical Code), contributing
to save discontinuities less than 2” / 50 mm. with a slope less than 25%.
Alloy: 6063 (L-3441/38-337)
Fire resistance: M0 (UNE 23-727-90)
Abrasion resistance: Very good
Lightfastness Excellent
Appearance and color EN 12373-1
Slip resistance
Good (*see graph in next
page) UNE ENV 16333 AIDICO
Technical Features and tests
General Features
Page 1 of 3
TECHNICAL FILE
R03.001_25/06/2010
Materials
Aluminium
Novonivel® Forte is a prole made by extrusion of aluminium. These proles have been anodized,
improving mainly by this process their corrosion and mechanical resistance and their appearance..
The anodized applied, has the quality seal “Qualanod” which guarantees the quality of the process and
the resulting proles. This seal regulates several tests: appearance and color, thickness measurements,
sealing and impregnation control, abrasion resistance, lightfastness, acetic saline chamber and nitric
acid immersion.
The aluminium is a material with excellent chemical, physical and mechanical properties. It is lightweight,
tough, ductile, malleable and highly durable.
*You can amplify the information by consulting the Technical Files available in www.emac.es
Novonivel® Forte
0,0
5,0
10,0
15,0
20,0
25,0
30,0
35,0
40,0
45,0
50,0
55,0
0 5 10 15 20 25 30 35 40 45 50
Rd Pavimento + Peldaño
Rd Pavimento
Comportamiento al deslizamiento
Novonivel® Forte
Class 1
Class 0
Class 2
Class 3
Comparison chart R
d
and Class
R
d
Flooring Initial class of ooring
R
d
Flooring+
Novonivel® Forte
Flooring class +
Novonivel® Forte
< 15 0 29 1
15 - 26 1 29 - 35 1
26 - 35 1 35 - 38 2
35 - 45 2 38 - 39 2
* In this graph you can see the comparison between the Rd of the ooring without Novonivel® Forte and the Rd of the ooring
with the prole installed. The different areas that conform different classes have been delimited to see clearly the improve-
ment obtained of Rd and of ooring class.
* With the help of this chart you can know the Rd and the class of the ooring which will result due to the installation of
Novonivel® Forte as stair nosing. You can compare the values obtained respecting to the ooring without the prole installed.
Values marked in green will identify those values whose improvement has meant an increasing of the class of the ooring.
Page 2 of 3
Performance of slip resistance
Novonivel® Forte
TECHNICAL FILE
R03.001_25/06/2010
You can nd out more information about the technical features of Emac®’s products by downloading
its Technical File in www.emac.es.
If you have any query, please contact our Technical Department in [email protected].
Technical information
Emac Complementos S.L. (Spain) info@emac.es // Emac America L.L.C. (FL,USA) [email protected] // Emac Italia S.R.L. (Italy) [email protected]
www.emac.es
The data provided are for information only and have been obtained by our supplier or Emac®.
Does not constitute legal guarantee in terms of properties and / or functionality of the application of material
Novonivel® Forte
1. Spread a big amount of gripping material on the surface where you will install the prole.
2. Then, place the prole and press it to let gripping material pass through the mechanized holes of
the xing wing.
3. Place a tile on the xing wing and press it to achieve an optimal contact with the gripping material.
4. Repeat the process, placing tiles along the xing wing of the prole.
5. Finally, clean the remaining material and let dry.
Placement
The product must be cleaned periodically with a soft cloth. If you use a neutral liquid cleaner, you must
rinse the prole with cold water and dry it to remove the humidity excess. The persistent dirtiness can
be removed by using cleaning approved agents lightly abrasive or a grid covered with polished powder
neutral. If a preserving agent is applied, as well as keep a very thin layer of water repellent, note that it
can’t be yellow,attract dust or dirt or have iridescent effects.
Steel wool, abrasive cleaners, souring products as well as strong acids (hydrochloric and
perchloric),strong bases (caustic soda or ammonia) or carbonated solutions are not recommended.
Citric acid is neither recommended because disolves the protective layer of the surface of aluminium.
Waxes, petrolatum, lanolin or similar substances are not appropriate. Solvents containing haloalkanes
(hydrouoroether and chlorinated solvents) and curing accelerators containing chlorides should not be
used (use special accelerators free of chlorides).
Cleaning and maintenance
Indoors Outdoors
Paving
Recyclable
To see the video, capture this
image with your mobile phone
(software QR code reader is
necessary)or click on it.
1 2 3 4 5
Page 3 of 3
-
1
-
2
-
3
dans d''autres langues
- English: Emac NVAF1312 Specification
Documents connexes
-
Emac NR10AR1382 Guide d'installation
-
-
-
-
-
-
-
-
-