Dell PowerVault DL2000 Guide de démarrage rapide

Dell™ PowerVault™ DL2000

Getting Started With

Your System

Začínáme se systémem

Mise en route de votre système

Handbuch zum Einstieg

Τα πρώτα βήματα με το σύστημά σας

Rozpoczęcie pracy z systemem

Начало работы с системой

Inicio de su sistema

Dell™ PowerVault™ DL2000

Getting Started With

Your System

Model EMS01

Notes, Notices, and Cautions

NOTE: A NOTE indicates important information that helps you make better use of

your system.

NOTICE: A NOTICE indicates either potential damage to hardware or loss of data

and tells you how to avoid the problem.

CAUTION: A CAUTION indicates a potential for property damage, personal injury,

or death.

____________________

Information in this document is subject to change without notice.

Reproduction of these materials in any manner whatsoever without the written permission of Dell Inc.

is strictly forbidden.

Trademarks used in this text: Dell, the DELL logo, and PowerVault are trademarks of Dell Inc.;

Intel and Xeon are registered trademarks of Intel Corporation in the U. S. and other countries;

Microsoft, Windows, and Windows Server are either trademarks or registered trademarks of

Microsoft Corporation in the United States and/or other countries.

Other trademarks and trade names may be used in this document to refer to either the entities claiming

the marks and names or their products. Dell Inc. disclaims any proprietary interest in trademarks and

trade names other than its own.

Model EMS01

August 2008 P/N U714H Rev. A00

Contents 3

Contents

System Features . . . . . . . . . . . . . . . . . . . . . . 5

Supported Operating Systems

. . . . . . . . . . . . . . . 7

Other Information You May Need

. . . . . . . . . . . . . 7

Obtaining Technical Assistance

. . . . . . . . . . . . . 8

NOM Information (Mexico Only)

. . . . . . . . . . . . . 8

Installation and Configuration

. . . . . . . . . . . . . . 9

Unpacking the System

. . . . . . . . . . . . . . . . 9

Unpack your system and identify each item.

. . . . 9

Install the Rails and System in a Rack

. . . . . . . . 9

Connect the Keyboard, Mouse, and Monitor

. . . 10

Connect the Power

. . . . . . . . . . . . . . . . . 10

Install the Power Cord Retention Bracket

. . . . . 11

Turn on the System

. . . . . . . . . . . . . . . . . 11

Install the Bezel

. . . . . . . . . . . . . . . . . . 12

Complete the 0perating System Setup

. . . . . . . . . 12

Technical Specifications

. . . . . . . . . . . . . . . . 12

4 Contents

Getting Started With Your System 5

System Features

The major hardware and software features of your system include:

• Two Dual-Core or Quad-Core Intel

®

Xeon

®

5400 Series and 5200 Series

processors.

• Support for symmetric multiprocessing (SMP), which is available on

systems with two Intel Xeon processors. SMP greatly improves overall

system performance by dividing processor operations between

independent processors. To take advantage of this feature, you must use an

operating system that supports multiprocessing.

NOTE: If you decide to upgrade your system by installing a second processor,

you must order the processor upgrade kits from Dell. Not all versions of the

Intel Xeon processor will work properly as additional processors. The

upgrade kit from Dell contains the correct version of the processor, heat sink,

and fan as well as the instructions for performing the upgrade.

• A minimum of 4 GB of 667-MHz, Fully Buffered DIMMs (FBD),

upgradable to a maximum of 16 GB by installing combinations of 1-GB or

2-GB memory modules in the eight memory module sockets on the system

board.

• The system also features redundant memory, which provides memory

sparing or memory mirroring. Either feature is available if eight identical

memory modules are installed.

• Support for up to four 3.5-inch internal hot-pluggable SATA hard drives.

• A slim-line SATA DVD, or combination CD-RW/DVD drive.

NOTE: DVD devices are data only.

• A chassis intrusion switch that signals the appropriate systems

management software if the top cover is opened.

• Baseboard Management Control (BMC) power monitoring monitors

current, voltage, and power utilization in the system.

• Up to two hot-pluggable, 750-W power supplies in an optional 1 + 1

redundant configuration.

• Four hot-pluggable system cooling fans.

6 Getting Started With Your System

The system board includes the following features:

• One of the following left riser card options:

– A left riser card that has one full-length PCIe x8 lane slot and one

full-length PCIe x4 lane slot.

OR

– A left riser card that has two full-length PCI-X 3.3-V, 64-bit,133-MHz

slots on separate PCI-X buses (capable of throttling back to support

legacy PCI add-in cards).

• A center riser card that has one half-length PCIe x8 lane slot.

• Dedicated slot for an integrated SAS host bus adapter. The internal

channel supports up to four 3.5-inch SATA hard drives.

NOTE: System boot is not supported from an external device attached to a

SAS or SCSI adapter.

• Two integrated Gigabit Ethernet NICs, capable of supporting 10-Mbps,

100-Mbps, and 1000-Mbps data rates.

• Optional Intel quad-port Gigabit Ethernet NIC, 10-Mbps, 100-Mbps, and

1000-Mbps data rates, and iSCSI remote boot.

• Support for 10-Gb Ethernet cards.

• One internal USB 2.0-compliant connector supporting bootable USB flash

drive or USB memory key.

• Four USB 2.0-compliant connectors (two on the front and two on the back)

capable of supporting a diskette drive, CD-ROM drive, keyboard, mouse,

or USB flash drive.

• Optional remote access controller (RAC) for remote systems management.

• An integrated VGA-compatible video subsystem with an ATI ES1000, 33-MHz

PCI video controller. This video subsystem contains 16 MB of DDR SDRAM

video memory (nonupgradable). Maximum resolution is 1600 x 1200 with

64 K colors; true-color graphics are supported in the following resolutions:

640 x 480, 800 x 600, 1024 x 768, 1152 x 864, and 1280 x 1024. When the

optional RAC is installed, the video resolution is 1280 X 1024.

• Systems management circuitry that monitors operation of the system fans as

well as critical system voltages and temperatures. The systems management

circuitry works in conjunction with the systems management software.

Getting Started With Your System 7

• Standard baseboard management controller with serial access.

• Back-panel connectors include one serial, one video, two USB, and two

NIC connectors.

• Front-panel connectors include a video and two USB connectors.

• Front-panel 1x5 LCD for system ID and error messaging.

• System ID button on the front and back panels.

For more information about specific features, see "Technical Specifications"

on page 12.

Supported Operating Systems

• Microsoft

®

Windows

®

Server 2008 Standard x64 Edition.

Other Information You May Need

CAUTION: See the safety and regulatory information that shipped with your

system. Warranty information may be included within this document or as a

separate document.

• The

Rack Installation Instructions

included with your rack solution

describes how to install your system into a rack.

• The

Hardware Owner’s Manual

provides information about system

features and describes how to troubleshoot the system and install or

replace system components. This document may be found on the CDs

that came with your system, or on

support.dell.com

.

• CDs included with your system provide documentation and tools for

configuring and managing your system.

• Release notes or readme files may be included to provide last-minute

updates to the system or documentation or advanced technical reference

material intended for experienced users or technicians.

8 Getting Started With Your System

Obtaining Technical Assistance

If you do not understand a procedure in this guide or if the system does not

perform as expected, see your Hardware Owner’s Manual. Dell™ offers

comprehensive hardware training and certification. See

www.dell.com/training for more information. This service may not be offered

in all locations.

NOM Information (Mexico Only)

The following information is provided on the device described in this

document in compliance with the requirements of the official Mexican

standards (NOM):

Importer:

Model number: EMS01

Supply voltage: 100–240 V CA

-(48–60) V CC

Frequency: 50/60 Hz

Current consumption: 9,0–4,5 A;

20 A (CC)

Getting Started With Your System 9

Installation and Configuration

CAUTION: Before performing the following procedure, review the safety

instructions that came with the system.

Unpacking the System

Unpack your system and identify each item.

Install the Rails and System in a Rack

Assemble the rails and install the system in the rack following the safety

instructions and the rack installation instructions provided with your system.

10 Getting Started With Your System

Connect the Keyboard, Mouse, and Monitor

Connect the keyboard, mouse, and monitor (optional).

The connectors on the back of your system have icons indicating which cable

to plug into each connector. Be sure to tighten the screws (if any) on the

monitor's cable connector.

Connect the Power

Connect the system’s power cable(s) to the system and, if a monitor is used,

connect the monitor’s power cable to the monitor.

Getting Started With Your System 11

Install the Power Cord Retention Bracket

Attach the power cord retention bracket on the right bend of the power

supply handle. Bend the system power cable into a loop as shown in the

illustration and attach to the bracket’s cable clasp.

Plug the other end of the power cables into a grounded electrical outlet or a

separate power source such as an uninterrupted power supply (UPS) or a

power distribution unit (PDU).

Turn on the System

Press the power button on the system and the monitor. The power indicators

should light.

12 Getting Started With Your System

Install the Bezel

Install the bezel (optional).

Complete the 0perating System Setup

If you purchased a preinstalled operating system, see the operating system

documentation that ships with your system. To install an operating system for

the first time, see the installation and configuration documentation for your

operating system. Be sure the operating system is installed before installing

hardware or software not purchased with the system.

Technical Specifications

Processor

Processor type One or two Dual-Core Intel Xeon

Processors 5000 Sequence

Expansion Bus

Bus type PCI-X, PCIe

Expansion slots

Center riser:

PCIe

One half-height x8 lane 3.3-V (slot 1)

Getting Started With Your System 13

Left riser

PCI-X option:

PCIe option:

Two full-height, full-length 3.3-V, 64-bit,

133-MHz (slots 2 and 3)

OR

One full-height x8 lane 3.3-V (slot 2)

and one full-height x4 lane 3.3-V (slot 3)

Memory

Architecture 667 MHz Fully Buffered DIMMs (FBD)

Memory module sockets Eight 240-pin

Memory module capacities 1 GB or 2 GB

Minimum RAM 4 GB

Maximum RAM 16 GB

Drives

Hard drives Up to four 3.5-inch, internal hot-

pluggable SATA hard drives

Diskette drive External optional USB 3.5-inch, 1.44-MB

Optical drive One slimline SATA

DVD or

combination CD-RW/DVD

NOTE:

DVD devices are data only.

Flash drive External optional USB

Expansion Bus (continued)

14 Getting Started With Your System

Connectors

Back

NIC

Two RJ-45 (for integrated 1-GB NICs)

Serial

9-pin, DTE, 16550-compatible

USB

Two 4-pin, USB 2.0-compliant

Video

15-pin VGA

Front

Video

15-pin VGA

USB

Two 4-pin, USB 2.0-compliant

Video

Video type ATI ES1000 video controller; VGA

connectors

Video memory 16 MB of DDR SDRAM

Power

AC power supply (per power supply)

Wa tt ag e

750 W

Voltage

85–264 VAC, autoranging, 47–63 Hz

Heat dissipation

2697 BTU/hr maximum

Maximum inrush current

Under typical line conditions and over

the entire system ambient operating

range, the inrush current may reach 55 A

per power supply for 10 ms or less.

Batteries

System battery

CR 2032 3.0-V lithium ion coin cell

RAID battery (optional)

4.1-V lithium ion

Getting Started With Your System 15

Physical

Rack

Height

8.656 cm (3.40 in)

Width

44.7 cm (17.6 in)

Depth

75.68 cm (29.79 in)

Weight (maximum configuration)

26.76 kg (59 lb)

Environmental

NOTE: For additional information about environmental measurements for specific

system configurations, see www.dell.com/environmental_datasheets.

Temperature

Operating

10° to 35°C (50° to 95°F) with a

maximum temperature gradation of

10°C per hour

Storage

–40° to 65°C (–40° to 149°F) with a

maximum temperature gradation of

20°C per hour

Relative humidity

Operating

20% to 80% (noncondensing) with a

maximum humidity gradation of 10%

per hour

Storage

5% to 95% (noncondensing) with a

maximum humidity gradation of 10%

per hour

Maximum vibration

Operating

0.25 G at 3–200 Hz for 15 min

Storage

0.5 G at 3–200 Hz for 15 min

Maximum shock

Operating

One shock pulse in the positive z axis

(one pulse on each side of the system) of

41 G for up to 2 ms

16 Getting Started With Your System

Storage

Six consecutively executed shock pulses

in the positive and negative x, y, and z

axes (one pulse on each side of the

system) of 71 G for up to 2 ms

Altitude

Operating

–16 to 3048 m (–50 to 10,000 ft)

Storage

–16 to 10,600 m (–50 to 35,000 ft)

Airborne Contaminant Level

Class

G2 or lower as defined by ISA-S71.04-

1985

Environmental (continued)

Dell™ PowerVault™ DL2000

Začínáme se systémem

Model EMS01

Poznámky a upozornění

POZNÁMKA:

POZNÁMKA označuje důležité informace, které pomáhají lepšímu využití

systému.

UPOZORNĚNÍ:

UPOZORNĚNÍ poukazuje na možnost poškození hardwaru nebo ztráty

dat a poskytuje návod, jak se danému problému vyhnout.

VÝSTRAHA: VÝSTRAHA označuje hrozící nebezpečí poškození majetku, poranění

nebo usmrcení osob.

____________________

Informace obsažené v tomto dokumentu podléhají změnám bez předchozího upozornění.

Jakákoli reprodukce těchto materiálů bez písemného povolení společnosti Dell Inc. je přísně zakázána.

Obchodní známky použité v tomto textu: Dell, logo DELL a PowerVault jsou obchodní známky

společnosti Dell Inc.; Intel a Xeon jsou registrované obchodní známky společnosti Intel Corporation

v USA a dalších zemích; Microsoft, Windows a Windows Server jsou buď ochranné známky nebo

registrované ochranné známky společnosti Microsoft Corporation v USA a dalších zemích.

V tomto dokumentu mohou být použity další ochranné známky a obchodní názvy buď s odkazem na

právnické osoby a organizace, které uplatňují na dané ochranné známky a obchodní názvy nárok, nebo

s odkazem na jejich výrobky. Společnost Dell Inc. nemá vlastnické zájmy vůči ochranným známkám

a obchodním názvům jiným než svým vlastním.

Model EMS01

Srpen 2008 Č. produktu U714H Revize A00

La page charge ...

Dell PowerVault DL2000 Guide de démarrage rapide

Dell PowerVault DL2000 Guide de démarrage rapide

dans d''autres langues

Documents connexes

Autres documents