EN
3- Control panel
11
3.5.4-Function button“6+6 kg“
6+6kg
3-5.4
Note: 6+6 kg
Do not overload. Combination of washing and drying cycle only allows a maximum loading
of 6 kg (5kg for HWD80-BP14636N).
3.5.1-Function button ” Temp.“
Press this button (Fig. 3-5.1) to change the washing
temperature of the programme.
In conjunction with the “Steam” button, the child lock
3.5.2-Function button “Speed”
Press this button (Fig. 3-5.2) to change or deselect
the spin of the programme. If no value is illuminated
the laundry will not spun.
Temp
Schleudern Intensiv Zeitvorwahl
5+5 kg
Kurz
Temp
Speed
3-5.1 3-5.2
3.5.3-Function button “Steam“
Speed Steam
5+5 kg
3-5.3
Press this button (Fig. 3-5.3) to activate the steam fu-
nction. When this function is activated the default tem-
perature is the maximum temperature of the progra-
mme selected. This function can be activated only with
the following programmes: Cotton, Synthetic, Mix, Baby
Care, Hygiene.When the function is activated the led
above the button will light up. Pushing again this button
the function can be deactivated and the led above the
button will turn off. When the function is activated the
temperature of the programme cannot be changed.
If “Temp.” is activated, “Steam” function cannot be sel-
ected. Users can only activate “Steam” function before
starting programmes. You cannot activate “Steam”
function while the appliance is already executing a prog-
ramme.
If not selected, the default normal temperature state.
Press this button (Fig. 3-5.4) in order to activate /de-
activate the drying function. This allows washing and
drying of maximum 6 kg laundry without interruption.
By pressing the button sequentially, drying time can be
set( 30, 60, or 150 minutes for Model HWD100 ;
0
Drying function is not applicable to all programmes
(see PROGRAMMES).
90,120
30,60, 90 or 120 minutes for Model HWD80 and HWD90). If
the display shows or
no value, the drying function is de-
activated. In combination with programme DRY this fu-
nction sets the drying time.