Motorola DTR600 Manuel utilisateur

PROFESSIONAL DIGITAL TWO-WAY RADIO

DTR600/DTR700

LIMITED KEYPAD PORTABLE RADIO

USER GUIDE

MN004869A01-AA

November 2018

©

*MN004869A01*

en-US

fr-CA

Contents

Product Safety and RF Exposure Compliance

...............5

Acoustic Safety....................................................5

Introduction.....................................................................6

Package Contents............................................... 6

Notice to Users (FCC and Industry Canada)..................7

Batteries and Chargers Safety Information.................... 8

Operational Safety Guidelines.............................8

Chapter 1: Radio Overview.......................................... 10

Radio Parts........................................................10

Radio Specifications.......................................... 11

Status Indicators................................................12

Display Icons.......................................... 12

Battery Features................................................ 12

About Li-Ion Battery................................ 12

Battery Recycling and Disposal.............. 13

Installing the Li-Ion Battery..................... 13

Removing the Li-Ion Battery................... 15

Holster.................................................... 16

Power Supply and Drop-In Tray SUC.....17

Battery Life..............................................18

Battery Status Information......................

18

Charging with the Drop-In Tray SUC...... 18

Charging a Stand-Alone Battery............. 19

Estimated Charging Time....................... 20

Charging a Radio and Battery using a

MUC........................................................20

LED Indicator of Chargers...................... 21

Chapter 2: Getting Started........................................... 23

Turning the Radio On or Off.............................. 23

Adjusting Volume...............................................23

Browsing and Selecting Channels.....................23

Chapter 3: Radio Call Features....................................25

Push-To-Talk (PTT) Button............................... 25

Talk Permit Tone (TPT)..................................... 25

Home Channel...................................................25

PROFILE ID.......................................................25

Setting the Non-Interference or Privacy

Feature................................................... 26

Talk Range........................................................ 26

Programmable Button Options.......................... 26

Private Reply..................................................... 27

English

2

Starting a Private Reply.......................... 27

Canceling Queues............................................. 27

Direct Call.......................................................... 27

Making a Direct Call................................28

Call All Available................................................28

Starting Call All Available........................29

Page All Available..............................................29

Starting Page All Available..................... 30

Chapter 4: Contacts Management............................... 31

Contact List........................................................31

Editing Contacts......................................31

Deleting Contacts................................... 31

Adding New Contacts............................. 32

Contacts............................................................ 32

Making Calls........................................... 32

Ending Calls............................................32

Call Log............................................................. 33

Storing Call Log...................................... 33

Chapter 5: Radio Settings............................................ 34

Adjusting Display Brightness............................. 34

Setting Backlight Timer......................................34

Setting Menu Timer........................................... 34

Enabling All Tones.............................................34

Enabling Vibrate................................................ 34

Enabling Keypad Tone...................................... 35

Enabling Power Up Tone...................................35

Selecting Mic Gain for Radio............................. 35

Selecting Mic Gain for Accessory......................35

Setting Languages.............................................36

Selecting Configuration Channel List................ 36

Chapter 6: Advanced Settings......................................37

PowerSave Mode.............................................. 37

Enabling PowerSave Mode.................... 37

Configuring the Programmable Button.............. 37

Selecting Home Channel...................................37

Chapter 7: Clone Mode................................................ 39

Cloning Radio.................................................... 39

Cloning with a MUC (Optional Accessory)........ 39

Cloning Radio Using Two SUCs and a Radio-

to- Radio Cloning Cable (Optional Accessory).. 41

What To Do If Cloning Fails...............................42

Cloning the Wireless PROFILE ID Number ......43

Chapter 8: Resetting to Factory Defaults..................... 45

English

3

Radio Factory Default Settings..........................45

Chapter 9: Customer Programming Software (CPS)... 46

Programming the Radio to CPS........................ 46

CPS Basic Menu Instructions............................ 46

Chapter 10: Troubleshooting........................................51

Symptoms and Solutions...................................51

Chapter 11: Use and Care........................................... 56

Chapter 12: Motorola Solutions Limited Warranty for

the United States and Canada..................................... 57

Warranty............................................................ 57

Products and Accessories................................. 57

Exclusions......................................................... 58

Software............................................................ 59

Warranty Coverage........................................... 59

How to Obtain Warranty Service or Other

Information.........................................................59

Patent Notice..................................................... 60

Export Law Assurances.....................................60

Appendix A: Accessories..............................................61

English

4

Product Safety and RF

Exposure Compliance

CAUTION:

Before using this product, read the Product Safety

and RF Exposure booklet enclosed with your radio

which contains important operating instructions for

safe usage and RF energy awareness and control

for Compliance with applicable Standards and

Regulations.

For a list of Motorola Solutions-approved antennas,

batteries, and other accessories, visit the following

web site:http://www.motorolasolutions.com

Acoustic Safety

CAUTION:

Exposure to loud noises from any source for

extended periods of time may temporarily or

permanently affect your hearing. The louder the

radio volume, the less time is required before your

hearing can be affected. Hearing damage from loud

noises is sometimes undetectable at first and can

have a cumulative effect.

To protect your hearing:

• Use the lowest volume necessary to do your job.

• Increase the volume only if you are in noisy

surroundings.

• Reduce the volume before connecting headset or

earpiece.

• Limit the amount of time you use headsets or earpieces

at high volume.

• When using the radio without a headset or earpiece, do

not place the radio speaker directly against your ear.

• If you experience hearing discomfort, ringing in your

ears, or speeches that are muffled, you should stop

listening to your radio through your headset or earpiece,

and have your hearing checked by your doctor.

English

5

Introduction

This user guide covers the operation of your radios.

This radio is a product of Motorola Solutions' 80 plus years

of experience as a world leader in the designing and

manufacturing of communications equipment. This series

provides cost-effective communications for businesses

such as retail stores, restaurants, schools, construction

sites, manufacturing, property and hotel management, and

more. Motorola Solutions professional two-way radios are

the perfect communications solution for all modern fast-

paced industries.

Your dealer or system administrator may have customized

your radio for your specific needs. Check with your dealer

or system administrator for more information.

NOTICE:

Read this user guide carefully to ensure that you

know how to properly operate the radio before use.

For product-related questions, contact: 1-800-448-6686 or

visit us at: http://www.motorolasolutions.com/DTR600 and

http://www.motorolasolutions.com/DTR700.

Package Contents

The following list encompasses the package content

available:

• Antenna

• Radio

• Holster

• Lithium-Ion Battery

• Power Supply

• Quick Reference Guide

• Drop-in Tray Charger

• Product Safety & RF Exposure Booklet

English

6

Notice to Users (FCC and

Industry Canada)

The business two-way radios operate in the license-free

900 MHz ISM Band (902 – 928 MHz) and are subject to the

Rules and Regulations of the Federal Communications

Commission (FCC).

This device complies with Part 15 of the FCC rules and

Industry Canada's license-exempt RSS's per the following

conditions:

• This device may not cause harmful interference.

• This device must accept any interference received,

including interference that may cause undesired

operation.

• Changes or modifications made to this device, not

expressly approved by Motorola Solutions, could void

the authority of the user to operate this equipment.

To comply with FCC/IC requirements, transmitter

adjustments should be made only by or under the

supervision of a technically qualified person to perform

transmitter maintenance and repairs. Replacement of any

transmitter component such as crystal, semiconductor, and

other that are not authorized by the FCC/IC equipment

authorization for this radio violates FCC/IC rules.

NOTICE:

Use of this radio outside the country where it was

intended to be distributed is subject to government

regulations and may be prohibited.

English

7

Batteries and Chargers

Safety Information

This document contains important safety and operating

instructions. Read these instructions carefully and save

them for future reference. Before using the battery charger,

read all the instructions and cautionary markings on:

• the charger

• the battery

• the radio attached with battery

• To reduce risk of injury, charge only the rechargeable

Motorola Solutions-authorized batteries. Charging the

other batteries may cause explosion, personal injury,

and damage.

• Use of accessories not recommended by Motorola

Solutions may result in fire, electric shock, or injury.

• To reduce damage to the electric plug and cord, pull by

plug rather than the cord when disconnecting the

charger.

• An extension cord should not be used unless

necessary. Use of an improper extension cord may

result in fire and electric shock. If an extension cord

must be used, make sure that the cord size is 18 AWG

for lengths up to 100 ft (30.48 m), and 16 AWG for

lengths up to 150 ft (45.72 m).

• Do not operate the charger if it has been broken or

damaged in any way. Take it to any qualified Motorola

Solutions service representatives.

• Do not disassemble the charger; it is not repairable and

replacement parts are not available. Disassembly of the

charger may result in risk of electrical shock or fire.

• To reduce risk of electric shock, unplug the charger from

the AC outlet before attempting any maintenance or

cleaning.

Operational Safety Guidelines

• Turn off the radio while charging.

• The charger is not suitable for outdoor use. Use only in

dry locations/conditions.

• Connect charger to an appropriately fused and wired

supply of the correct voltage (as specified on the

product only).

• Disconnect charger from line voltage by removing main

plug.

English

8

• Connect the equipment to an outlet which is easy to

access and near.

• For equipment using fuses, replacements must comply

with the type and rating specified in the equipment

instructions.

• Maximum ambient temperature around the power

supply equipment must not exceed 40 °C (104 °F).

• Power output from the power supply unit must not

exceed the ratings stated on the product label located at

the bottom of the charger.

• Make sure the cord is not stepped on, tripped over,

subjected to water, damage or stress.

English

9

Radio Overview

This chapter explains the buttons and functions to control

the radio.

Radio Parts

This chapter describes the buttons and functions of the

radio.

1

2

3

4

5

13

11

12

10

9

8

7

6

14

Figure 1: Radio Overview

Table 1: Radio Parts

Label Item Description

1 Antenna Provides the needed RF

amplification when trans-

mitting or receiving.

2 Push-To-Talk

(PTT) button

Press to transmit to other

radios.

3 Volume Up/

Down Control

buttons

Press to adjust the vol-

ume level and to mute

the radio.

4 Programmable

button

This button is field pro-

grammable by using the

Customer Programming

Software (CPS).

5 P1 button Press to select Info of

the radio.

6 Menu/OK button Press to enter Menu and

to confirm selection.

7 4-Way Naviga-

tion button

Press to toggle to the

left/right/up/down of the

selections available in

the menu.

English

10

Label Item Description

8 Home/Back but-

ton

Press to cancel and re-

turn to a previous menu

level; press and hold to

return to Home screen.

9 P2 button Press to view the con-

tacts set in the radio.

10 Display A display that provides

visual information about

radio features.

11 Microphone Speak clearly into the mi-

crophone when transmit-

ting.

12 Speaker Outputs all tones and au-

dio that are generated by

the radio (for example,

keypad tones and voice

audio).

13 Power button Press to turn on and off

your radio.

14 Audio Accessory

Connector

Used to connect compat-

ible audio accessories.

Radio Specifications

The radio model is printed on the back of the radio with the

following information.

Table 2: Radio Specifications

Model Fre-

quency

Band

Trans-

mit

Power

(Watts)

Number

of

Chan-

nels

Anten-

na

DTR600 ISM 900

MHz

1 30 Remov-

able

DTR700 ISM 900

MHz

1 50 Remov-

able

English

11

Status Indicators

This chapter explains the status indicators and audio tones

used in the radio.

Display Icons

Your radio display shows icons indicate radio status.

Table 3: Display Icons

Icon Description

Mute Mode

Mute Mode is enabled and

speaker is muted.

Tones Disable

Tones are turned off.

Vibrate

Vibrate mode is enabled.

Mini Negative Notice

Failed action taken.

Icon Description

Mini Positive Notice

Successful action taken.

Battery Features

The radio comes with standard Lithium-Ion (Li-Ion)

batteries.

About Li-Ion Battery

The radio comes with a rechargeable Li-Ion battery. This

battery should be fully charged before initial use to ensure

optimum capacity and performance.

Battery life is determined by several factors. The critical

ones are overcharging of batteries and the average depth

of discharge each cycle. Typically, the greater the

overcharge and the deeper the average discharge, the

fewer cycles a battery will last. For example, a battery

which is overcharged and discharged 100% for several

times a day, lasts fewer cycles than a battery that

overcharges less and is discharged to 50% per day.

Battery with minimal overcharge and has an average of

25% discharge, lasts even longer.

English

12

Motorola Solutions batteries are designed specifically to be

used with a Motorola Solutions charger and vice versa.

Charging batteries with non-Motorola Solutions equipment

may lead to battery damage and void the battery warranty.

Whenever possible, maintain the battery temperature to

77 °F (25 °C) (room temperature). Charging a cold battery

(below 50 ° F [10 °C]) may result in leakage of electrolyte

and ultimate failure of the battery. Charging a hot battery

(above 95 °F [35 °C]) results in reducing discharge capacity

and affecting the performance of the radio. Motorola

Solutions rapid-rate battery chargers contain a

temperature-sensing circuit to ensure that batteries are

charged within the temperature limits stated above.

Battery Recycling and Disposal

Li-Ion rechargeable batteries can be recycled. However,

recycling facilities may not be available in all areas. Under

various U.S. state laws and the laws of several other

countries, batteries must be recycled and cannot be

disposed of in landfills or incinerators. Contact your local

waste management agency for specific requirements and

information in your area. Motorola Solutions fully endorses

and encourages the recycling of Li-Ion batteries.

In the U.S. and Canada, Motorola Solutions participates in

the nationwide Call2Recycle program for battery collection

and recycling. Many retailers and dealers participate in this

program. For the location of the drop-off facility closest to

you, access Call2Recycle's Internet web site at https://

www.call2recycle.org/ or call 1-800-8-BATTERY. This

internet site and telephone number also provide other

useful information concerning recycling options for

consumers, businesses, and governmental agencies.

Installing the Li-Ion Battery

1 Align the battery contacts with the contacts inside

the battery compartment. Insert the contact side of

the battery first. Gently push the battery into place

and ensure the position of the battery flap is on top

of the battery.

English

13

1

2

2 To attach battery cover, align it in place and slide the

battery latch until it snaps into place.

2

1

3 Slide battery latch into lock position.

English

14

3

Removing the Li-Ion Battery

Ensure that the radio is turned off.

1 Move the battery latch to the unlock position.

1

2 Remove the battery cover by lifting the battery cover

up.

English

15

2

1

3 Pull the battery flap to remove the battery from the

radio.

1

Holster

The following steps explain how to use a holster.

English

16

1 To insert the radio into the holster, press the radio

against the back of the holster until the hook on the

holster are inserted in the top recess.

2 To remove the radio from the holster, detach the

hook of the holster from the top recess using the top

tab and slide the radio out from the holster.

Power Supply and Drop-In Tray SUC

The radio is equipped with one power supply, and one

single unit charger.

Figure 2: Charging with SUC

English

17

Battery Life

The battery lasts longer when Battery Save feature is set to

on (enabled by default).

Table 4: Li-Ion Battery Life

Battery Type Battery Save ON

Standard 16.5 hours

NOTICE:

Battery save is enabled by default. Battery life is

estimated based on 5% transmit/5% receive/90%

standby standard duty cycle.

Battery Status Information

Battery status icon displays on the top left of the radio

screen.

Table 5: Battery Status

Battery Status Battery Level Battery Icon

High 71%–100%

Medium 41%–70%

Low 11%–40%

Critical 0%–10%

Shutdown

1

0%

Charging with the Drop-In Tray SUC

The radio comes with a standard power supply and a

Single Unit Charger.

NOTICE:

Turn off the radio before charging and fully charge

the battery before first use. It is best to charge at

room temperature.

1

When the battery is on a Shutdown level, a continuous alert tone and automatically shutdown occurs.

English

18

1 Place the SUC on a flat surface.

2 Insert the connector of the power supply into the port

on the side of the SUC.

3 Plug the AC adapter into a power outlet.

4 Insert the radio into the SUC with the front of the

radio facing the LED of the SUC. Ensure the radio is

securely inserted all the way into the charger.

NOTICE:

For more information, see LED Indicator of

Chargers on page 21 and Operational

Safety Guidelines on page 8.

The charger LED flashes a few times to indicate the

current battery capacity when the radio is inserted in

the tray rails. The light on the charger is red to

indicate that the battery is charging and turns green

indicates that the battery is fully charged.

Charging a Stand-Alone Battery

NOTICE:

Turn off the radio before charging. For more

information, see LED Indicator of Chargers on page

21.

Insert the battery into the charging pocket with the

front of the battery facing the LED of the Single Unit

Charger (SUC).

The charger LED flashes a few times to indicate the

current battery capacity when the radio is inserted in

the tray rails. The light on the charger is red to

English

19

indicate that the battery is charging and turns green

indicates the battery is fully charged.

1

2

Figure 3: Charging a Stand-Alone Battery

Estimated Charging Time

The following table provides the estimated charging time of

the battery. For more information, see Accessories on page

61.

Table 6: Estimated Charging Time

Charging Solutions Estimated Charging

Time

Single-Unit Charger with 3 W

Power Supply

5 hours 15 minutes

Charging Solutions Estimated Charging

Time

Single-Unit Charger with 5 W

Power Supply

4 hours 15 minutes

Multi-Unit Charger 4 hours 15 minutes

Charging a Radio and Battery using a

MUC

The Multi-Unit Charger (MUC) is an optional accessory and

it has six charging pockets, which allows charging up to six

radios or batteries. The batteries can be charged together

with or without the radios or placed in the MUC separately.

NOTICE:

Turn off the radios before charging and it is best to

charge at room temperature.

1 Place the MUC on a flat surface.

English

20

La page charge ...

Motorola DTR600 Manuel utilisateur

Motorola DTR600 Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents