Ironman Fitness 6806 Le manuel du propriétaire

Ironman Fitness
Marque
Ironman Fitness
Modèle
6806
Taper
Le manuel du propriétaire
Weight Bench
The specifications of this product may vary from this photo and are subject to change without notice.
IRONMAN, IRONMAN TRIATHLON and M-DOT are registered trademarks of World Triathlon Corporation.
This product is licensed by the World Triathlon Corporation.
OWNER’S MANUAL
6806.0‐090116
SERVICE ------------------------------------------------------------------- 2
LABLE PLACEMENT --------------------------------------------------- 3
PRODUCT SAFETY ----------------------------------------------------- 4
OVERVIEW DRAWING ------------------------------------------------ 5
PART LIST ----------------------------------------------------------------- 6
HARDWARE PACK ------------------------------------------------------ 7
STEP 1 ---------------------------------------------------------------------- 8
STEP 2 ---------------------------------------------------------------------- 9
STEP 3 ---------------------------------------------------------------------- 10
ADJUSTMENT ------------------------------------------------------------ 11
TRANSPROTING -------------------------------------------------------- 12
WARRANTY --------------------------------------------------------------- 13
PARTS REQUEST FORM --------------------------------------------- 14
1
TABLEOFCONTENTS
IMPORTANT: FOR NORTH AMERICA ONLY
For damaged, defective products, questions, replacement parts, or any
other service support, please contact our customer service department
(8:00 AM - 5:00 PM Pacific Standard Time, Daily) by the below methods:
For Best Service, please Email:
Service@paradigmhw.com*
Response Time: 1-2 Business Days
Website:
www.paradigmhw.com
Toll-Free:
1-844-641-7922**
Response time may vary.
Please have the following information ready when requesting for service:
Your name
Phone number
Model number
Serial number
Part number
Proof of Purchase
For damaged or defective products please contact our customer service
before returning to the store.
Paradigm Health & Wellness, Inc.
1189 Jellick Ave.
City of Industry, CA 91748, USA
SERVICE
2
UNDER PENALTY OF LAW THIS TAG
NOT TO BE REMOVED EXCEPT BY THE
CONSUMER
NOTICE
This article does not meet
requirements of California
Bureau of Home Furnish-
ings technical bulletin 117.
Care should be exercised
burning cigaretts.
ALL NEW MATERIALCONSISTING
OF POLYURETHANE
FOAM PAD_100%
REGISTRY NO. VA25302 (CN)
manufacturer that the materials
in this article are described in
accordance with law.
Paradigm Health and Wellness, Inc.
1189 Jellick Ave. City of Industry
CA 91748, USA
Paradigm Health and Wellness, Inc.
1189 Jellick Ave. City of Industry, CA
91748 USA
SE SANCIONARÁ LEGALMENTE A
QUIENES QUITEN ESTA ETIQUETA.
SOLO EL CONSUMIDOR PODRÁ
QUITARLA.
MATERIAL COMPLETAMENTE NUEVO
COMPUESTO DE 100% RELLENO DE
ESPUMA DE POLIURETANO.
NOTIFICACIÓN
Este artículo no se ajusta a
Mobiliario boletín técnico
117. Cuidado de California
deben ejercerse cerca de
una llama abierta o con
cigaretts ardientes.
NO. DE REG VA25302 (CN)
materiales de este artículo se
describen según las leyes.
Paradigm Health and Wellness, Inc.
1189 Jellick Ave. City of Industry
CA 91748, USA
SOUS PEINE DE SANCTION LÉGALE,
CETTE ÉTIQUETTE NE PEUT ÊTRE
ENLEVÉE PAR UNE PERSONNE AUTRE
QUE LE CONSOMMATEUR
AVIS
Ce produit ne satisfait pas
-
du devis technique du
California Bureau of Home
Furnishings. Ne pas utiliser
près d’une source de
nue (cigarettes, etc.)
ENTIÈREMENT FABRIQUÉ DE
MATÉRIAUX NEUFS REMBOURRAGE
DE MOUSSE DE
POLYURÉTHANE 100 %
NO D’ENREGISTREMENT
VA253 02 (CN)
Cette étiquette est apposée
conformément aux lois Cana-
diennes.
3
LABELPLACEMENT
WARNING: Before using this equipment you should consult with your physician to see if this
Bench is appropriate for you. Do not use this equipment without your physician’s approval.
Do not use this equipment if you have any of the following conditions or ailments:
Extreme obesity
Glaucoma, retinal detachment or conjunctivitis
Pregnancy
Spinal injury, Cerebral Sclerosis, or acutely swollen joints
Middle ear infection
High blood pressure, Hypertension, Recent stroke or Transient ischemic attack
Heart or circulatory disorders for which you are being treated
Hiatus hernia or Ventral hernia
Bone weaknesses including Osteoporosis, Unhealed fractures, Modularly pins, or Surgically
implanted orthopedic supports
Use of anti-coagulants including Aspirin in high doses
The Maximum Weight Capacity for this product is 800lbs / 363kgs.
Read all the instructions carefully before assembling or operating this product. Retain this
owner’s manual, do not remove any safety labels from the machine and keep the original
purchase receipt for future reference.
This Bench is designed and built for optimum safety. However, certain precautions apply whenever
you operate this exercise equipment. Be sure to read the entire manual before assembling and
operating this equipment. Also, note the following safety instructions:
1. Consult your physician or other health care professionals before using this Bench.
2. Always wear proper exercise apparel when using this equipment. Use care when getting on or
off the unit.
3. If at any time you feel faint, light-headed, or dizziness while operating this equipment, stop
exercising immediately and contact your physician. You should also stop exercising if you are
experiencing pain or any kind of discomfort.
4. Keep children and pets away from this equipment at all times.
5. Only one person should use this equipment at a time.
6. Make sure your equipment is correctly assembled before you use it. Be sure all screws, nuts,
and bolts are tightened prior to use. Check screws, nuts, and bolts are tight on a weekly basis.
7. Do not operate this or any exercise equipment if it is damaged.
8. Wait 2 hours after eating before using this exercise equipment. If you get nauseous, stop
exercising as soon as you feel queasy.
9. This product should be placed on a flat surface when using. A mat or other covering material
on the ground is recommended. For indoor use only, do not use outdoors or near water.
10. Keep hands and feet away from any moving parts. Do not insert any objects into any
openings on the equipment.
11. Keep loose clothes, jewelry, limbs and long hair away from moving parts.
12. Children under the age of 12 should not use this fitness equipment.
13. Children from 12 to 18 should have adult supervision.
PRODUCTSAFETY
4
OVERVIEWDRAWING
5
296
Part # Description Q'ty
A Main Frame 1
B Front Support Tube 1
C Front Stabilizer 1
D Rear Stabilizer 1
E Rear Support Tube 1
F Backrest Support Tube 2
G Leg Holder 1
H Seat 1
J Backrest 1
2 Hex Bolt 4
28 Hex Bolt 4
29 Carriage Bolt 4
30 Hex Bolt 1
60 Flat Washer 4
61 Spring Washer 13
62 Flat Washer 8
63 Curved Washer 4
64 Flat Washer
1
76 Nylon Nut 3
79 Cap Nut 4
105 Pin 1
106 Round Knob 1
133 Wheel End Cap 2
134 Stability End Cap 2
136 Round End Cap 2
137 Round End Cap 2
159 Rectangle End Cap 1
160 Square End Cap 4
211 Hand Grip 2
230 Plastic Washer 2
231 Foam Roller 2
296 Threaded Shaft 1
484 Bumper 1
PART LIST
6
7
HARDWAREPACK
O
2
O
pening
t
1. Rest t
h
Main
F
2
. Pull th
e
the fir
s
t
he Benc
h
h
e Benc
h
F
rame (A
)
e
Front
S
s
t hole o
n
h
:
h
on its ri
g
)
.
S
upport T
n
the bra
c
g
ht side
a
ube (B)
f
c
ket of M
a
a
nd pull t
h
f
orward
a
a
in Fram
e
STEP1
8
h
e Pin (1
a
nd com
p
e
(A).
05) out f
r
letely rei
n
r
om the
b
nsert the
b
racket o
Pin (10
5
n the
5
) into
In
2
3
4
2
3
4
s
talling th
1. Lift up
t
the fro
n
shoul
d
2
. Insert
T
thread
s
Suppo
r
3
.
A
ttach
thread
e
4
. Tighte
n
I
nstalling
1. Lift up
t
holes
o
shoul
d
2
. Insert
T
thread
s
Frame
3
.
A
ttach
thread
e
4
.
Tighte
n
(#29)
C
4
h
e Front S
t
t
he Front
S
n
t curve o
f
d
point to
w
T
wo Carri
a
s
reach all
r
t Tube (B
)
two Curv
e
e
d side of
t
n
the Cap
N
the Rear
S
t
he Rear
o
o
n the rear
d
point to
w
T
wo Carri
a
s
reach all
(A).
two Curv
e
e
d side of
t
n
the Cap
N
C
arriage B
o
4
PCS
t
abilizer (
C
S
upport T
u
f
the Front
w
ards the
a
ge Bolts (
2
the way t
h
)
.
e
d Washer
s
t
he two C
a
N
uts (79)
w
S
tabilizer
o
f the Main
curve of t
h
w
ards the
a
ge Bolts (
2
the way t
h
e
d Washer
s
t
he two C
a
N
uts (79)
w
o
lt (#7
C
) with St
a
u
be (B), an
Support T
floor.
2
9) into th
e
h
rough to t
s
(63), tw
o
a
rriage Bol
w
ith the 1
4
(D) with
W
Frame (
A
h
e Main F
r
floor and
2
9) into th
e
h
rough to t
s
(63), tw
o
a
rriage Bol
w
ith the M
u
9) Cap N
u
4 PCS
ability En
d
d then ali
g
ube (B). T
e
square
s
he other s
o
Spring W
ts (29).
4
mm Multi
W
heel En
d
A
), and the
n
r
ame (A).
T
The CUS
T
e
square
s
he other s
o
Spring W
ts (29).
u
lti Hex to
o
STEP
2
9
u
ts (#
6
d
Caps (1
3
g
n the Fro
n
he squar
e
s
haped hol
ide and c
o
ashers (6
1
Hex tool
p
d
Caps (1
3
n
align the
T
he squa
r
T
OMER S
s
haped hol
ide and c
o
ashers (6
1
o
l with Phi
l
2
6
1) Spring
4 PC
S
3
4):
n
t Stabilize
e
holes of
e
s of the
F
o
me out of
1
), and tw
o
p
rovided.
3
3):
Rear Sta
b
r
e holes o
f
ERVICE s
e
s of the
R
o
me out of
1
), and tw
o
l
lips Scre
w
Washe
r
S
r (C) hole
s
the Front
F
ront Stabi
the front
c
o
Cap Nut
s
b
ilizer (D)
h
f the Rea
r
s
tickers fa
R
ear Stabi
l
the rear c
u
o
Cap Nut
s
w
driver pro
v
M
u
Phili
p
(#63
)
W
a
4
s
with the
h
Stabilize
r
lizer (C) u
n
c
urve of th
e
s
(79) to th
e
h
oles with
t
r
Stabilize
cing upw
a
izer (D) u
n
u
rve of th
e
s
(79) to th
e
v
ided.
u
lti Hex tool
w
p
s Screwdri
v
)
Curved
a
she
r
4
PCS
h
oles on
r
(C)
n
til the
e
Front
e
t
he
r (D)
a
rd.
n
til the
e
Main
e
w
ith
v
er 1PC
2
3
4
I
nstalling
1. On to t
Flat W
a
2
. Insert
t
unders
Suppo
r
3
.
A
lign t
h
Round
4
. Tighte
n
the Fr
o
(
#
the Leg
H
he thread
e
a
sher (64)
t
he thread
e
ide of the
F
r
t Tube (B
)
h
e Thread
e
Knob (10
6
n
the Rou
n
o
nt Suppor
t
#
106) Rou
n
1 P
C
H
older:
e
d shaft of
.
e
d shaft of
F
ront Sup
p
)
.
e
d hole on
6
) that is s
t
n
d Knob (1
0
t
Tube (B)
n
d Knob
C
the Roun
d
the Roun
d
p
ort Tube
(
the back
s
t
icking out
0
6) by tur
n
.
(#61
)
d
Knob (1
0
d
Knob (1
0
(
B) until th
e
s
ide of the
from the
h
n
ing it cloc
k
STEP3
10
)
Spring
W
1 PC
0
6) first pla
c
0
6) into on
e
e
threads
a
Leg Hold
e
h
ole on th
e
k
wise until
W
ashe
r
c
e a Sprin
g
e
of the fo
u
a
re visible
o
r (G) with
t
e
front side
the Leg H
o
(#64) Flat
1
P
g Washer
ur
A
vailab
l
on the fro
n
the thread
e
of Front
S
o
lde
r
(G) i
s
t
Washe
r
P
C
(61) follo
w
l
e holes o
n
n
t side of t
h
ed shaft o
f
S
upport Tu
s
firmly se
c
w
ed by a
n
the
h
e Front
f
the
be (B).
c
ured to
Adjusti
n
1. P
u
o
n
C
o
th
e
Adjusti
n
1. Li
f
2. G
e
th
e
3. S
e
n
g the Fro
u
ll the Pin (
n
e of the fol
a. Posi
t
b. Posi
t
c. Posi
t
o
mpletely r
e
e position
y
n
g the Ba
c
f
t the Rear
e
ntly lower
e Main Fra
m
e
lect a posi
t
nt Suppo
r
105) out fr
o
lowing pos
i
t
ion P1 giv
e
t
ion P2 giv
e
t
ion P3 is f
o
e
-insert the
y
ou select.
c
krest (J):
Support Tu
the Backre
m
e (A).
t
ion and re
s
r
t Tube (
B
o
m the Mai
n
i
tions:
e
s a flat and
e
s an inclin
e
o
r folding u
p
Pin (105) i
n
be (E) off
o
s
t (J) while
s
t the Rear
AD
J
B
):
n
Frame (A
)
d
level seat
f
e
d seat for
w
p
the Bench
nto the hol
e
of
the tabs t
h
holding th
e
Support T
u
J
USTM
E
11
and swing
f
or working
w
orking out
for storag
e
e
of the bra
c
h
at run alo
n
e
Rear Sup
p
u
be (E) aga
E
NT
1
the Front
S
out.
.
e
.
c
ket on the
n
g the shaf
t
p
ort Tube (
E
i
nst the Ma
i
0
5
S
upport Tu
b
Main Fra
m
t
of Main Fr
E
) up and
a
in Frame (
A
b
e (B) into
e (A) for
a
me (A)
a
way from
A
).
Transporting In Storage Mode:
Lift up the Front Stabilizer (C) until the wheels on the Wheel End Caps (133) make
contact with the ground, then move the bench to your desired location.
Transporting In Storage Mode:
Lift up the Seat (H) until the wheels on the Wheel End Caps (133) make contact
with the ground, then move the bench to your desired location.
TRANSPORTING
12
133
C
133
H
MANUFACTURER’S LIMITED WARRANTY
Paradigm Health & Wellness warrants to the original purchaser that this product is free
from defects in material and workmanship when used for the purpose intended, under the
conditions that it has been installed and operated in accordance with Paradigm’s Owner’s
Manual. Paradigm’s obligation under this warranty applies to the following:
COMPONENT LENGTH OF WARRANTY
Structural Frame 5 years
Parts 1 years
Wearable Parts 1 year
(computer display, electronics, upholstery, foam, ball bearings, pulleys, belts, cables,
wires, shocks, covers, tension, internal mechanism, wheels, pedals, knobs, accessories
and hardware)
Exclusions from Warranty Coverage:
Paradigm does not warrant against and is not responsible for, and no implied warranty shall be deemed to cover, any
product failure, product malfunction, or damages attributable to:
1. Improper installation and/or failure to abide by Paradigm’s installation guidelines;
2. Use of this product beyond normal home use, or in an application for which it was not designed.
3. All exchanged parts and Products replaced under this limited warranty will become the property of Paradigm Health
and Wellness.
4. Damage caused by vandalism, accidents, inadequate maintenance, or by animals.
5. Any act of Nature (such as fire, flooding, snow, ice, hurricane, earthquake, lightning or other natural disaster),
environmental condition (such as air pollution, mold, mildew, etc.), or staining from foreign substances (such as dirt,
grease, oil, etc.).
6. Normal weathering due to exposure to sunlight, weather and atmosphere which can cause colored surfaces to,
among other things, flake, rust, accumulate dirt or stains.
7. Improper operation, alteration, handling, storage, abuse or neglect of the product
.
Paradigm, using its sole discretion, will either repair or replace free of charge any part(s)
proven to be defective under normal home use. Any repair or replacement shall provide
no new warranty coverage, but shall retain only the remaining portion of the original
product’s warranty. All exchanged parts and Products replaced under this limited warranty
will become the property of Paradigm Health and Wellness. This warranty is offered only to
the original purchaser and is not transferable. Proof of original purchase is required.
Ordering Replacement Parts
Replacement parts can be ordered by emailing our customer service department:
[email protected]
Open Daily 8:00 AM - 5:00 PM (PST).
When ordering replacement parts please have the following information ready:
1. Owner’s Manual
2. Model Number
3. Description of Parts
4. Part Number
5. Date of Purchase
WARRANTY
13
Paradigm Health & Wellness, Inc.
EMAIL THIS FORM WITH YOUR RECIEPT OF PURCHASE TO
Service@paradigmhw.com *
NAME: _______________________________________________________
ADDRESS: ____________________________________________________
CITY ______________ STATE ______________ ZIP ___________________
TELEPHONE: (Day) _____________________________________________
(Night) ____________________________________________
SERIAL#: _____________________________________________________
MODEL#: _____________________________________________________
PURCHASE DATE: ______________________________________________
PLACE OF PURCHASE: _________________________________________
“YOUR ORDER WILL BE PROCESSED WITHIN 3 BUSINESS DAYS”
*This form can also be faxed to #: 626-810-2166
PART # DESCRIPTION QTY
PARTS REQUEST FORM
14
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16

Ironman Fitness 6806 Le manuel du propriétaire

Ironman Fitness
Marque
Ironman Fitness
Modèle
6806
Taper
Le manuel du propriétaire
Télécharger le PDF
rapport

dans d''autres langues

Documents connexes

Autres documents