Dino-Lite WF-20 Digital Microscope Manuel utilisateur

Marque: Dino-Lite

Modèle: WF-20 Digital Microscope

Taper: Manuel utilisateur

Ce manuel convient également à

Dino-Lite WF-20 Digital Microscope

Dino-Lite CONNECT

WF-20

Instruction Manual

Contents

FCC Statement

IC Statement

Instroduction

System Requirement

Package Contents

Overview and Function

Getting Started

DinoConnect 2 on iOS

DinoConnect on Android

Battery Information

Specifications

This equipment complies with FCC radiation exposure limits set forth for an

uncontrolled environment. End user must follow the specific operating

instructions for satisfying RF exposure compliance.

FCC Radiation Exposure Statement

Federal Communication Commission Notice

This equipment has been tested and found to comply with the limits for a Class

B digital device, pursuant to Part 15 of the FCC Rules. These limits are

designed to provide reasonable protection against harmful interference in a

residential installation.

This equipment generates, uses, and can radiate radio frequency energy. If this

equipment does cause harmful interference to radio or television reception,

which can be determined by turning the equipment off and on, the user is

encouraged to try and correct the interference by one or more of the following

measures:

FCC Caution:

DECLARATION OF CONFORMITY WITH FCC RULES

FOR ELECTROMAGNETIC COMPATIBILITY

We, AnMo Electronics Corporation, of 5F-1, No. 76, Sec. 2, Dongda

Road, Hsinchu City 300082, Taiwan, declare under our sole

responsibility the product WF-20, to which this declaration relates,

complies with Part 15 of the FCC Rules. Operation is subject to the

following two conditions: (1) this device may not cause harmful

interference, and (2) this device must accept any interference

received , including interference that may cause undesired operation.

Reorient or relocate the receiving antenna.

Consult the dealer or an experienced radio/TV technician for help.

Connect the equipment into an outlet on a circuit different from that to

which the receiver is connected.

Increase the distance between the equipment and receiver.

Any changes or modifications not expressly approved by the party

responsible for compliance could void the user's authority to operate this

equipment.

For product available in the USA/Canada market, only channel 1~11 can be

operated. Selection of other channels is not possible.

This device contains licence-exempt transmitter(s)/receiver(s) that comply

with Innovation, Science and Economic Development Canada’s licence-exempt

RSS(s). Operation is subject to the following two conditions:

Cet équipement est conforme aux limites d’exposition aux rayonnements IC

établies pour un environnement non contrôlé. Cet équipement doit être installé

et utilisé avec un minimum de 20cm de distance entre la source de

rayonnement et votre corps

IC statement

This equipment complies with IC RSS-102 radiation exposure limits set forth

for an uncontrolled environment. This equipment should be installed and

operated with minimum distance 20cm between the radiator & your body.

IC Radiation Exposure Statement

The transmitter module may not be co-located with any other transmitter or

antenna.

Le module émetteur peut ne pas être coïmplanté avec un autre émetteur ou

antenne.

For product available in the USA/Canada market, only channel 1~11 can be operated.

Selection of other channels is not possible.

Pour les produits disponibles aux États-Unis/Canada du marché, seul le canal 1 à 11 peuvent

être exploités. Sélection d'autres canaux n'est pas possible.

IC Caution:

This device may not cause interference.

This device must accept any interference, including interference that may

cause undesired operation of the device.

L’émetteur/récepteur exempt de licence contenu dans le présent appareil est

conforme aux CNR d’Innovation, Sciences et Développement économique

Canada applicables aux appareils radio exempts de licence. L’exploitation est

autorisée aux deux conditions suivantes :

L’appareil ne doit pas produire de brouillage;

L’appareil doit accepter tout brouillage radioélectrique subi, même si le

brouillage est susceptible d’en compromettre le fonctionnement.

Introduction

System Requirement

Package Contents

The WF-20 is a Wi-Fi streamer, as well as a wireless router, to use

combinedly with Dino-Lite Edge AF series for viewing and sharing

observation without wire. With high quality image transmission and

long battery life, the WF-20 is well suited for field applications.

Mobile device or computer with operating system:

Rubber lid

Mini USB charging cable Dino-Lite WF-20

Wi-Fi streamer

Compatible Dino-Lite Digital microscope:

Dino-Lite Edge AF series

iOS 10.X or later

Android 6.0 or later

Windows XP (SP3)/Vista/7/8/10

Overview and Function

Button usage and description:

LED status and description:

Green LED

(Wi-Fi signal)

Red LED

(battery level)

Indicator

Data transferring

Battery remains <70%

Battery under charging

Battery remains <40%

Battery remains >70%

Battery full charged

Status

Blinking

2 flashes

per cycle

Blinking

repetitively

1 flash

per cycle

3 flashes

per cycle

Solid

On / Off

power button

Reset

pinhole button

Buttons Description

Press and hold for 1.5 seconds to turn on/off.

Press and hold the pinhole button for 3 seconds

to restore factory settings.

Interface release button

Wi-Fi signal LED indicator

Battery LED indicator

On / Off power button

Reset pinhole button

Mini USB port

(for charging purpose)

Getting Started

Charging the Battery

Assembling the Device

The WF-20 needs to be used with Dino-Lite AF series. The assemble

procedure is as described below.

Charge the WF-20 by connecting to a computer or a USB charger

using the Mini USB charging cable.

1. Pressing the two interface release buttons at the same

time to remove the USB interface adapter cap.

Remove the rubber lid from the WF-20. Suggest to cover

the rubber lid onto the USB adapter cap for preventing

dust build-up inside.

Attach the WF-20 onto AF series with the Dino-Lite logos

facing the same side.

Do not bend the join part anytime especially when

releasing the USB adapter cap or WF-20. Doing so may

cause damage on the devices.

Notice:

Downloading the APP or software

Setting the Network

iOS/Android

WF-20iOS & android

devices

Windows

Install DinoCapture 2.0 version 1.5.30 or above via CD.

The latest version of DinoCapture can also be downloaded

from https://www.dino-lite.com/download01.php.

Powering on

Press the power button for 1.5 seconds to power on. The startup

process may take about half minute until the Dino-Lite’s LED lit up.

iOS/Android

Download and install DinoConnect from the Apple© App

Store© or Google Play™.

To power off

Press the power button again for 1.5 seconds.

Select WF-20’s SSID (default: “Dino-Lite WF-20”), and

input password (default: “12345678”).

1. Go to settings of your iOS/Android device.

2. Turn on Wi-Fi.

4. Launch DinoConnect for using the Dino-Lite.

5. (Optional) When multiple WF-20 are used nearby, be

advised to change WF-20’s SSID and password in

DinoConnect settings for distinguishing purpose.

The WF-20 may connect up to 10 mobile devices at the same time,

however, image fluency may be affected as more devices are

connected.

Note:

WF-20iOS & android

devices Access Points

You may further setup the WF-20 as a router to build

connection between your mobile and a wireless network.

Now your device is able to connect with the chosen

network via the WF-20. The device will remember the last

connected wireless network.

Joining Wireless Network

Windows PC/laptop

3. Enter the security key (default: “12345678”), and click

Next to connect.

2. Select WF-20’s SSID (default: “Dino-Lite WF-20”), and

click the Connect button.

4. Launch DinoCapture 2.0 for using the Dino-Lite.

1. Turn on Wi-Fi of your computer, and select the

Network by clicking or icon in the notification

area.

Choose a network, then enter password.3.

Tap “Choose a network”.2.

1. Open DinoConnect settings .

DinoConnect 2 on iOS

DinoConnect 2 is an iOS app, compatible with iOS 12 or later, for

using with WF-20 Wi-Fi streamers.

Overview

FunctionNo.

Battery

LED control

Text

Measurement

Magnification

Gallery

Settings

To view captured images or recorded

videos.

To change the resolution or frame rate of

the Dino-Lite, as well as the Wi-Fi settings

of the WF-20.

To capture an image or record a video. The

camera and video modes can be switched

below the shutter button.

To input magnification. Models with AMR

display magnification automatically.

Description

To control Dino-Lite’s illumination.

To create, edit, or format text.

To perform or delete measurements.

Exposure To adjust exposure.

To indicate battery level of the WF-20.

Shutter

How to delete measurement

Tap the trash bin icon on the toolbox to delete the

measurement. Note that the measurements on

captured images cannot be deleted.

Select the measurement object. The measurement

toolbox will display.

DinoConnect 2 allows users to perform measurements on the live

preview or images captured with magnification recorded.

Measurement

How to do measurement

Check the magnification has been entered correctly for

models without AMR.

Repeat Step 3 until all points needed by the

measurement are specified.

Tap again on the preview to complete the

measurement.

Tap the measurement toolbox and select a

measurement tool. Each measurement consists of two

or three points.

Tap to specify a point on the preview. Before the next

point is specified, the point position can be

fine-adjusted by sliding the finger anywhere on the

preview in the intended direction.

DinoConnect on Android

DinoConnect is an Android app, compatible with Android 4.4 or

later, for using with WF-20 Wi-Fi streamers.

Overview

Swipe right to show

more on the tool bar.

Magnification

Measurement

To input magnification. Models with AMR

display magnification automatically.

Gallery To view captured images or recorded

videos.

Trash bin To delete measurements on live preview.

Refresh

LED control

Exposure

To refresh the live preview.

To perform measurements.

Record To start or stop a video recording.

To control Dino-Lite’s illumination.

To adjust exposure.

FunctionNo. Description

Settings To change the resolution or frame rate of

the Dino-Lite, as well as the Wi-Fi settings

of the WF-20.

Camera To capture an image.

How to do measurement

Check the magnification has been entered correctly for

models without AMR.

Select a measurement tool. Each measurement

consists of two or three points.

Tap again on the preview to complete the

measurement.

Repeat Step 3 until all points needed by the

measurement are specified.

Tap to specify a point on the preview. Before the next

point is specified, the point position can be

fine-adjusted by sliding the finger anywhere on the

preview in the intended direction.

How to delete measurement

2. Tap on the preview image, a notice dialog will pop up.

3. Tap “Yes”, and all measurements will be deleted.

1. Tap the trash bin icon.

DinoConnect allows users to perform measurements on the live

preview.

Measurement

The built-in battery of WF-20 has a limited lifespan and may

eventually need to be serviced. Do not repair or replace the built-in

battery of WF-20. Please contact your local dealer and they will

help to send back to the manufacturer for replacing the battery,

which is not covered under warranty.

The WF-20 was designed to have more than 2.5 hours battery life,

but may vary with different Dino-Lite model and the way of using.

Charging the WF-20 may take 3-4 hours by a USB charger or a

power bank. The WF-20 can still be used while charging, but be

noted that extra heat will be generated and may affect circuit

performance under poor ventilation.

The battery of WF-20 retains average 80% of its original capacity

after 500 charge cycles. The following tips may help to prolong

battery lifespan:

For extending battery life, you may consider to reduce Dino-Lite’s

LED brightness in APP or software.

Battery Information

Prevent exposing or charging the WF-20 at temperature above

30°C (86°F).

Avoid draining the battery all the way to 0%.

Charge the WF-20 to 50% for long-term storage.

Store the WF-20 at 15~25°C (59~77°F).

Specifications

Product name

Support protocol

SSID (default)

Antenna

Frequency

Battery

Power consumption

Battery continuous

operation time

Operation temperature

Weight

Dimensions

10~45°C (50~113°F)

58 mm x 36.5 mm x 32 mm

Dino-Lite WF-20

1600 mAh

approx. 57 g (with battery)

2.5 hours

(tested by using with AF4915)

2.5 W

WF-20

Wi-Fi IEEE802.11b / g / n

2.4 GHz Wi-Fi FPCB antenna

2.412 GHz~2.485 GHz

Dino-Lite WF-20 Digital Microscope Manuel utilisateur

Marque: Dino-Lite

Modèle: WF-20 Digital Microscope

Taper: Manuel utilisateur

Ce manuel convient également à

Dino-Lite WF-20 Digital Microscope

Télécharger le PDF

rapport

dans d''autres langues

English: Dino-Lite WF-20 Digital Microscope User manual

Documents connexes

Dino-Lite Dino-Lite WF-20 Digital Microscope Manuel utilisateur

Dino-Lite WF-20 Digital Microscope Manuel utilisateur

Ce manuel convient également à

Dino-Lite WF-20 Digital Microscope Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents