JennAir JFFCC72EHL Le manuel du propriétaire

Marque: JennAir

Modèle: JFFCC72EHL

Catégorie: Frigos

Taper: Le manuel du propriétaire

W11310001A

Table of Contents/Table des matières/Índice...................................................................................2

USE AND CARE GUIDE

For questions about features, operation/performance, parts, accessories, or service,

call 1-800-JENNAIR (1-800-536-6247) or visit our website at www.jennair.com.

In Canada, call 1-800-JENNAIR (1-800-536-6247) or visit our website at www.jennair.ca.

Get the app, connect instructions, terms of use, and privacy policy at www.jennair.com/connect.

GUIDE D’UTILISATION ET D’ENTRETIEN

Au Canada, pour assistance, installation ou service, composez le 1-800-JENNAIR (1-800-536-6247)

ou visitez notre site Web à www.jennair.ca.

MANUAL DE USO Y CUIDADO

Si tiene preguntas respecto a las características, funcionamiento, rendimiento, partes, accesorios o servicio técnico,

llame al 1-800-JENNAIR (1-800-536-6247) o visite nuestro sitio de internet: www.jennair.com.

En Canadá, llame al 1-800-JENNAIR (1-800-536-6247) o visite nuestro sitio de internet: www.jennair.ca.

JENNAIR

FRENCH DOOR

REFRIGERATOR

RÉFRIGÉRATEUR JENNAIR

AVECPORTEÀDOUBLE BATTANT

REFRIGERADOR DE PUERTAS

FRANCESASJENNAIR

TABLE OF CONTENTS

REFRIGERATOR SAFETY ..............................................................3

PARTS AND FEATURES ................................................................4

What’s New Behind the Doors? ...................................................5

GETTING STARTED .......................................................................6

REFRIGERATOR CONNECTIVITY FEATURES ...........................7

CONNECTIVITY SETUP .................................................................8

INSTALLATION INSTRUCTIONS .................................................10

Unpack the Refrigerator .............................................................10

Location Requirements ..............................................................10

Remove and Replace Refrigerator Doors ..................................11

Remove and Replace Freezer Drawer Fronts ............................14

Electrical Requirements .............................................................15

Water Supply Requirements ......................................................15

Connect the Water Supply .........................................................15

Handle Installation and Removal ...............................................17

Refrigerator Leveling and Door Closing .....................................18

FILTERS AND ACCESSORIES ...................................................18

Water Filtration System ..............................................................18

Install FreshFlow™ Air Filter ......................................................20

Install Produce Preserver (on some models) .............................20

Accessories ................................................................................21

REFRIGERATOR USE ..................................................................21

Opening and Closing Doors .......................................................21

Using the Controls .....................................................................22

External Dispenser Controls ......................................................24

Lighting the Refrigerator ............................................................24

Water and Ice Dispensers ..........................................................24

Ice Maker and Storage Bin .......................................................27

Shelves, Bins, and Drawers .......................................................29

Freezer Drawers .........................................................................31

Audio Reference .........................................................................31

REFRIGERATOR CARE ...............................................................32

Cleaning .....................................................................................32

Lights ..........................................................................................33

Vacation and Moving Care .........................................................33

TROUBLESHOOTING—CONNECTED MODELS ......................34

TROUBLESHOOTING ..................................................................35

PERFORMANCE DATA SHEET ...................................................44

WARRANTY ..................................................................................45

TABLE DES MATIÈRES

SÉCURITÉ DU RÉFRIGÉRATEUR...............................................46

PIÈCES ET CARACTÉRISTIQUES ..............................................47

Quoi de neuf en coulisse? .........................................................48

POUR COMMENCER ...................................................................49

CARACTÉRISTIQUES DE CONNEXION

DU RÉFRIGÉRATEUR .................................................................50

CONFIGURATION DE LA CONNECTABILITÉ ............................ 51

INSTRUCTIONS D’INSTALLATION .............................................53

Déballage du réfrigérateur..........................................................53

Exigences d’emplacement .........................................................53

Retrait et réinstallation des portes du réfrigérateur ...................54

Retrait et remplacement de l’avant du tiroir de congélation .....57

Spécications électriques ..........................................................58

Spécications de l’alimentation eneau .....................................58

Raccordement à la canalisation d’eau ......................................58

Installation et retrait des poignées .............................................60

Nivellement du réfrigérateur etfermeture de la porte................61

FILTRES ET ACCESSOIRES .......................................................61

Système de ltration d’eau ........................................................61

Installation du ltre à air FreshFlow™ ........................................ 63

Installation du conservateur de produits frais

(sur certains modèles) ................................................................63

Accessoires ................................................................................64

UTILISATION DU RÉFRIGÉRATEUR ..........................................64

Ouverture et fermeture des portes .............................................64

Utilisation des commandes .......................................................65

Commandes de distributeur externe .........................................67

Éclairage du réfrigérateur ...........................................................67

Distributeurs d’eau et de glaçons ..............................................67

Machine à glaçons et bac d’entreposage .................................70

Tablettes, balconnets et tiroirs ...................................................72

Tiroirs du congélateur ................................................................74

Référence audio .........................................................................74

ENTRETIEN DU RÉFRIGÉRATEUR ............................................75

Nettoyage ...................................................................................75

Lampes .......................................................................................76

Précautions à prendre pour les vacances

ou le déménagement .................................................................76

DÉPANNAGE – MODÈLES AVEC CONNEXION ........................77

DÉPANNAGE .................................................................................78

FICHE DE DONNÉES RELATIVES AU RENDEMENT................87

GARANTIE .....................................................................................88

SEGURIDAD DEL REFRIGERADOR ...........................................90

PIEZAS Y CARACTERÍSTICAS ...................................................91

¿Qué hay de nuevo detrás de las puertas? ...............................92

CÓMO COMENZAR .....................................................................93

CARACTERÍSTICAS DE CONECTIVIDAD

DEL REFRIGERADOR .................................................................94

CONFIGURACIÓN DE LA CONECTIVIDAD ...............................95

INSTRUCCIONES DE INSTALACIÓN .........................................97

Desembale el refrigerador ..........................................................97

Requisitos de ubicación .............................................................97

Cómo retirar y volver a colocar las puertas del refrigerador .....98

Cómo retirar y volver a colocar el frente de los cajones

del congelador .........................................................................101

Requisitos eléctricos ................................................................102

Requisitos de suministro de agua ...........................................102

Conexión del suministro de agua ............................................102

Cómo instalar y quitar las manijas ...........................................104

Nivelación del refrigerador y cierre de las puertas ..................105

FILTROS Y ACCESORIOS ........................................................105

Sistema de ltración de agua ..................................................105

Cómo instalar el ltro de aire FreshFlow™ ..............................107

Cómo instalar el preservador de alimentos frescos

(enalgunosmodelos) ...............................................................107

Accesorios ................................................................................108

USO DEL REFRIGERADOR .......................................................108

Cómo abrir y cerrar las puertas ...............................................108

Uso de los controles ................................................................109

Controles del despachador externo ........................................111

Iluminación del refrigerador .....................................................111

Despachadores de agua y de hielo .........................................111

Fábrica de hielo y depósito dealmacenamiento ....................114

Estantes, depósitos y cajones .................................................116

Cajones del congelador ...........................................................118

Referencia de audio .................................................................118

CUIDADO DEL REFRIGERADOR .............................................119

Limpieza ...................................................................................119

Luces ........................................................................................120

Cuidado durante las vacaciones ylas mudanzas ...................120

SOLUCIÓN DE PROBLEMAS: MODELOS CONECTADOS ....121

SOLUCIÓN DE PROBLEMAS....................................................122

HOJA DE DATOS DE RENDIMIENTO.......................................131

GARANTÍA...................................................................................132

ÍNDICE

You can be killed or seriously injured if you don't immediately

You

can be killed or seriously injured if you don't

All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can

happen if the instructions are not followed.

Your safety and the safety of others are very important.

We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety

messages.

This is the safety alert symbol.

This symbol alerts you to potential hazards that can kill or hurt you and others.

All safety messages will follow the safety alert symbol and either the word “DANGER” or “WARNING.”

These words mean:

follow instructions.

instructions.

DANGER

WARNING

REFRIGERATOR SAFETY

IMPORTANT SAFETY INSTRUCTIONS

WARNING:

To reduce the risk of fire, electric shock, or injury when using your refrigerator, follow these basic precautions:

SAVE THESE INSTRUCTIONS

■ Plug into a grounded (earthed) outlet.

■ Do not remove ground prong.

■ Do not use an adapter.

■ Do not use an extension cord.

■ Disconnect power before servicing.

■ Replace all parts and panels before operating.

■ Remove doors from your old refrigerator.

■ Use nonflammable cleaner.

■ Do not store or use petrol, flammable liquids or gas in the

vicinity of this or other electrical appliances. The fumes can

cause fires or explosions.

■ Do not store explosive substances such as aerosol cans

with a flammable propellant in this refrigerator.

■ Do not use or place electrical devices inside the refrigerator

compartments if they are not of the type expressly

authorized by the manufacture.

■ Use two or more people to move and install refrigerator.

■ Disconnect power before installing ice maker (on ice maker

kit ready models only).

■ A qualified service technician must install the water line and

ice maker.

■ Connect to a potable water supply only.

■ Use a sturdy glass when dispensing ice (on some models).

■ This appliance is not intended for use by persons (including

children) with reduced physical, sensory or mental

capabilities, or lack of experience and knowledge, unless

they have been given supervision or instruction concerning

use of the appliance by a person responsible for their safety.

■

Children should be supervised to ensure that they do not

play with the appliance.

■ To avoid the risk of children becoming trapped and

suffocating, do not allow them to play or hide inside the

refrigerator.

■ If the power supply cord is damaged, it must be replaced by

the manufacturer or its service agent or a similarly qualified

person.

PARTS AND FEATURES

Gallon

Door Bin

Air Filter

Medium

Door Bin

Humidiseal™

Crisper Drawers

Temperature-

Controlled

Pantry Drawer

In-Door-Ice

Storage Bin

Fold-Away Glass

Shelf

Small Door

Bin (2)

Gallon Door

Bin (4)

Proper Disposal of

Your Old Refrigerator

WARNING

Suffocation Hazard

Remove doors from your old refrigerator.

Failure to do so can result in death or

brain damage.

IMPORTANT: Child entrapment and suffocation are not

problems of the past. Junked or abandoned refrigerators are

still dangerous—even if they will sit for “just a few days.” If

you are getting rid of your old refrigerator, please follow these

instructions to help prevent accidents.

Before You Throw Away Your Old Refrigerator or Freezer:

■ Take off the doors.

■ Leave the shelves in place so that children may not easily

climb inside.

Important information to know about disposal of

refrigerants:

Dispose of refrigerator in accordance with Federal and Local

regulations. Refrigerants must be evacuated by a licensed,

EPA certified refrigerant technician in accordance with

established procedures.

Wi-Fi SAID

(smart appliance

ID sticker)

Temperature

Controls

Wine Rack — Optional

Water Filter

Herb Tender

Container

Pull-Out Platter

Adjustable Glass

Shelves

Glide-Out Freezer

Drawer

Your JennAir

French door refrigerator comes equipped with various

innovative storage and energy-efcient features.

Obsidian Interior

This dramatic interior showcases food items throughout the

refrigerator and provides a sharper contrast than white interiors.

Includes coordinating crisper drawers and freezer.

Energy and Normal Operating Sounds

Your new French door bottom-mount refrigerator has been

designed with a Linear Compressor to optimize energy efciency

and better regulate temperatures to match cooling demand. You

may notice that it operates differently than your previously owned

refrigerator. This allows the refrigerator to respond at variable

speeds and optimize cooling needs by avoiding abrupt start/stop

cycles.

In-Door-Ice

Storage Bin

The ice maker and ice storage bin are located in the door for easy

access to ltered ice while freeing up valuable shelf space inside

and adding additional door bins for more usable space.

Twin Fresh™ Climate Control System

The refrigerator and freezer compartments have separate

evaporators to provide fresh food and frozen food with optimal

storage climates: cool and humid in the fresh food, cold and dry

in the freezer, no mixing of air between the compartments to

reduce the transfer of food odors and tastes from refrigerator to

freezer and allow freezer air to remain dry to control frost and

reduce freezer burn.

FreshFlow™ Air Filter

An air lter is 15 times more powerful than baking soda at

reducing common food odors inside the refrigerator. Replace

your air lter every 6 months for maximum odor reduction.

Water Dispenser with Measured Fill

The Measured Fill feature allows you to dispense a desired

amount of ltered water in handy increments like 8, 16, or 24 oz.

Water Dispenser with Favorite Fill

The Favorite Fill feature allows you to save 2 custom presets that

can be programmed for favorite items that are frequently lled like

a coffee pot or a water bottle.

Fold-Away Glass Shelf

This special shelf provides a exible storage option for tall items

by allowing half the shelf to fold out of the way.

Pull-Out Platter

This full-width slide-out shelf is ideal for holding nished dishes

waiting to be served or for ingredients needing more preparation.

Electronic Temperature-Controlled Pantry Drawers

These drawers provide precise, independent temperature control

with 4 specialized settings for maximum exibility.

Herb Tender

Container

This removable accessory provides a dedicated space to help

optimize herb freshness.

Humidiseal™ Crisper Drawers

These drawers maintain a higher humidity level than the main

refrigerator compartment to help keep produce fresh.

Small Items Bin

This bonus storage area is perfect for butter, cream cheese, or

salad/condiment packets.

Interior LED Theater Lighting

Multiple strips of LED lights inside the refrigerator compartment,

freezer compartment, and interior drawers minimize shadows and

evenly distribute light throughout the refrigerator.

Soft, Auto-Close Technology

Provides smooth operation of drawer glides with an auto-close

design that pulls drawers closed.

Door Ajar Alarm

A helpful alarm sounds when the refrigerator door or freezer

drawer is left ajar.

Power Outage Indicator

If the power should go out while you are away from home, this

indicator will let you know that the refrigerator has been without

power.

Wi-Fi Connectivity

This refrigerator can connect with in-home Wi-Fi to provide

remote control through an app, available to download for use

with either iOS or Android devices.

House Symbol

This function automatically turns on after the

appliance is provisioned and registered. Pressing

the Connect button, will turn off this function

temporarily.

What’s New Behind the Doors?

To view videos on door removal/

replacement, door adjustment, water

filter installation, air filter installation,

shelf adjustment or removal, and

Wi-Fi (if applicable) connectivity,

scan the code to the left with your

mobile device.

GETTING STARTED

INSTALLATION CHECKLIST

✔ Electrical Power

■ Plug refrigerator into a grounded 3 prong outlet.

✔ Doors

■ If doors need to be removed during installation, see the

“Remove and Replace Doors” in the instructions.

■ Check that handles are secure and installed according to the

instructions.

■ Doors seal completely.

■ Refrigerator is level. (Remove base grille and adjust leveling

feet so they are snug against the oor.)

■ Doors are even across the top. (Use door alignment feature if

necessary.)

■ Base grille is properly attached to the refrigerator.

✔ Ice and Water System (on some models)

■ Connect refrigerator to a cold water supply with 20-120 psi

water pressure, as specied in the instructions.

■ Make sure the household water supply is connected and

turned on.

■ Check that the water supply line behind refrigerator is not

kinked.

■ Only use recommended water supply tubing, copper, or PEX,

as specied in the instructions.

■ Install water lter according to the instructions.

■ Flush water system with 3 gallons (11.4 L) of water, as

specied in the instructions.

■ Check for water leaks at all connections.

■ Turn on ice maker if refrigerator is connected to water supply.

(If not connected to water supply, turn off ice maker.)

✔ Final Checks

■ Install air lter according to instructions in corresponding

packaging.

■ Remove all shipping material.

■ Set temperature controls to the recommended setting.

■ Save instructions and other literature.

■ Send in Registration Card or register your product online.

WATER FILTER INSTALLATION

■ Locate the water lter compartment in the lower left-hand side

of the refrigerator compartment. Push on the right side of the

lter door to open.

■ Align the arrow on the water lter cap with the cutout notch in

the lter housing and insert lter.

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death,

fire, or electrical shock.

WARNING

■ Once the lter is inserted, turn the lter clockwise 90° (1/4 turn)

until it locks into the housing.

■ Push water lter door closed to latch.

■ Flush 3 gallons (11.4 L) of water through the water system to

clear air from the water line and to keep the dispenser from

dripping and/or avoiding decreased dispenser ow.

NOTE: If the lter is not installed correctly, water may

dispense at a lower ow rate and there will be slower ice

production. Improper lter installation may also cause the

water lter housing to leak.

Align Refrigerator Doors

✔ If doors are uneven:

■ Ensure the refrigerator is level.

■ Keeping both refrigerator doors closed, pull out the freezer

drawer. Locate the bottom hinge pin of the right-hand

refrigerator door. The alignment screw is inside the bottom

hinge pin.

■ Insert the short end of the 1/8" hex-key wrench (packed with

the Door Handle Installation Instructions) into the bottom hinge

pin until it is fully engaged in the alignment screw.

To raise the refrigerator door, turn the hex key to the right.

To lower the door, turn the hex key to the left.

DOOR ALIGNMENT

Tools Required

Depending on the width of the door opening, the following tools

may be required to remove, replace, and align the refrigerator

doors.

Tools Needed:

■ 1/4" hex nut driver – base grille, freezer drawer screws, and

brake/leveling feet

Tools Provided:

■ 1/8" hex key – handle setscrews and door alignment

Door alignment tool instructions

Features:

■ Creates an even horizontal gap

between the refrigerator doors.

■ Solves door alignment issues

during installation and improves door seal.

Shelf Height Adjustment

Shelf height can be adjusted by changing the adjustable shelf

mounts between their vertical and horizontal positions.

■ Carefully lift the shelf off the shelf mounts and turn the ipper

to the desired orientation.

■ Repeat for remaining shelf mounts.

■ Ensure the shelf is properly seated on the shelf mounts.

■ Continue to turn the alignment screw until the tops of the door

are aligned.

ENERGY SAVER MODE AND NORMAL

OPERATING SOUNDS

Your new French door bottom mount refrigerator has been

designed to optimize energy efciency and better regulate

temperatures to match cooling demand.

You may notice that it operates differently from your previously

owned refrigerator.

It is normal for the high-efciency compressor to run for extended

periods of time at varying speeds in order to consume only the

energy necessary for optimum efciency.

In addition, during various stages of the cooling cycle, you may

hear normal operating sounds that are unfamiliar to you.

Energy Saver Mode

A selectable feature that turns off the heaters around the

refrigerator doors and dispenser. When this feature is enabled,

condensation may form on the front of the refrigerator cabinet,

gasket, or on top of the freezer drawer. Savings may vary based

on the relative humidity of environment.

REFRIGERATOR CONNECTIVITY FEATURES

(on some models)

Wi-Fi connectivity allows your Smart Refrigerator to connect to the Internet and interact with the JennAir

app from your smartphone or

mobile device. This connection opens up several Smart options to you — options intended to save you valuable time and energy. Refer

to the “Troubleshooting—Connected Models” section of this Use & Care Guide, check any connection instructions for your specic

router, and refer to alternate instructions at www.jennair.com/connect or call 1-877-559-2603.

NOTE: Requires Wi-Fi and account creation. App features and functionality subject to change. Subject to Terms of Service available at:

www.jennair.com/connect. Data rates may apply.

SMART FEATURES

Smart Features help make your everyday a little more efcient

by letting you remotely monitor, manage, and maintain your

refrigerator.

Remote Temperature Control

What it does: Allows you to control your refrigerator remotely

from your mobile device via the JennAir

app.

What it does for you: Lets you control temperatures in your

refrigerator, freezer, and temperature-controlled pantry remotely—

not just when you are standing in front of it.

Water Filter Status

What it does: Gives you a look at the life remaining for your water

lter before replacement is needed. This allows you to reset the

lter.

What it does for you: Helps you be more efcient in planning

for ordering and replacing lters.

Auto Reorder App

What it does: Allows you to order replacement lters,

consumables, and accessories via the JennAir

app for

delivery directly to your home.

What it does for you: Simplies ordering correct water and air

lters—no trips to the store searching for the correct lters.

Door Ajar Alert

What it does: Sends you a notication when one of the doors of

the refrigerator has been left open.

What it does for you: Alerts you to door-open status so you

can close the door(s) or call home to ask someone else to close

door(s) before over-temperature situation arises.

Power Outage Alerts

What it does: Sends you a notication when power

to your refrigerator is disconnected, returns, and when

the highest temperature is reached in the refrigerator

and freezer compartments during the power outage.

What it does for you: Alerts you to power status and duration

of outage to provide input regarding disposition of refrigerator/

freezer contents.

CONNECTIVITY SETUP

(on some models)

IMPORTANT: Proper installation of your refrigerator prior to use is your responsibility. Be sure to read and follow the User Instructions

that came with your refrigerator.

Automatic Set-Up Instructions—Wi-Fi Protected Setup (WPS)

Press the WPS button on the router. An indicator light will

begin blinking.

HELPFUL TIP: The WPS function on your router is active

for 2 minutes. Complete the next step within that timeframe

or you will need to reinitiate WPS.

1. Setup router

You will need:

• A home wireless router capable of WPS. The router should

be ON and have a live Internet connection.

• The Smart Appliance Identication Number (SAID) from your

refrigerator. This is located on a sticker on the front side of the

right-hand hinge cover of the refrigerator.

NOTE: If your home wireless router is not equipped with a WPS

button, please check the user manual of your router to conrm

if it is WPS capable. If not, alternate set-up instructions are at

www.jennair.com/connect.

Over Temperature

What it does: Sends you a notication when the temperature in

your refrigerator rises and reaches above a specied value in the

refrigerator and freezer compartments.

What it does for you: Alerts you to over-temperature status to

provide input regarding disposition of refrigerator/freezer contents.

Max Cool

What it does: Allows you to control your refrigerator remotely

from your mobile device via the JennAir

app.

What it does for you: Lets you turn on/off Max Cool options

remotely to make temperatures colder in the refrigerator in

anticipation of loading newly purchased grocery items. Lowers

internal temperatures for 24 hours.

Max Ice

What it does: Allows you to control your freezer remotely from

your mobile device via the JennAir

app.

What it does for you: Lets you turn on/off Max Ice remotely

to increase ice production. Reduces the set temperature to the

lowest possible setting for 24 hours to maximize ice production.

Pure Freeze

Mode Control

What it does: Allows you to receive status of your refrigerator

remotely to your mobile device via the JennAir

app.

What it does for you: Informs you whether Pure Freeze

mode is

active in your refrigerator to reduce freezer burn and help frozen

items maintain their appearance and taste.

Sabbath Mode

What it does: Allows the door of the refrigerator or freezer to be

opened or closed during the Sabbath or other religious holidays

without activating the interior lights or controls. Allows you to turn

on and off remotely from your mobile device via the JennAir

app.

What it does for you: Lets you turn on/off Sabbath mode options

remotely.

Dispenser Light Brightness Control

What it does: Allows you to control your refrigerator remotely to

your mobile device via the JennAir

app.

What it does for you: Lets you turn on/off the dispenser lighting

remotely.

Favorite Fill Control

What it does: Allows you to change your Favorite Fill values

on your refrigerator remotely using your mobile device via the

JennAir

app.

What it does for you: Lets you set and save Favorite Fill values

remotely.

GET STARTED

Refer to the Quick Connect packet that came with your

refrigerator, or go to www.jennair.com/connect and follow

the instructions to get connected.

Check the JennAir

app frequently for additional information and

features.

Requires Wi-Fi and account creation. App features and

functionality subject to change. Subject to Terms of Service

available at: www.jennair.com/connect. Data rates may apply.

If Your Refrigerator Doesn’t Connect:

If your refrigerator and router fail to connect after 2 minutes,

the Wi-Fi status indicator will blink rapidly for 5 seconds

and then turn off. Refer to the “Troubleshooting—Connected

Models” section of this Use & Care Guide, check any connection

instructions for your specic router, and refer to alternate

instructions at www.jennair.com/connect or call

1-877-559-2603.

3. Download JennAir

app and

set up user account

From your mobile device, smartphone, or tablet, go to

www.jennair.com/connect and follow the instructions

to download and install the JennAir

app.

Once installed, tap the JennAir

app icon to open the app. You

will be guided through the steps to set up a user account. The

app will make sure to get the necessary personal and home

information as well as information about your energy company.

Registering your refrigerator in your account is a necessary

step in order for you to take full advantage of the Smart

features. When prompted by the app, enter the SAID (case

sensitive), which can be found on a sticker on the front side

of the right hand hinge cover of the refrigerator.

My Smart Appliance ID# is:

■ The Wi-Fi status indicator on the refrigerator control panel

will blink slowly while your refrigerator and router attempt

to connect.

■ Note that this blinking only applies to rst-time registration

after provisioning. No blinking behavior for automatic

reconnection after a connection is established.

■ Once you’ve connected your refrigerator to your home

Wi-Fi network, it will remain linked even if the power goes

out, you move the appliance, or if you put it in storage for

a while.

■ If you replace your wireless router (or get a different

Smart refrigerator), you will need to repeat this

connectivity set-up process.

4. Register your refrigerator in your

user account

NOTE: If this is your rst Smart Appliance, you will need to

download the JennAir

app and create an online user account.

If you already have the app and a user account, please skip ahead

to Step 4 “Register your refrigerator in your user account.”

To disconnect Wi-Fi, press and hold Connect button between

7 and 15 seconds, the <Wi-Fi> and <house> icons will turn off,

indicating that you have disabled the Wi-Fi radio.

To reconnect Wi-Fi, press and hold Connect button for

3 seconds on the Home screen.

The Wi-Fi status indicator ( ) on the refrigerator control panel will

blink slowly while your refrigerator and router attempt to connect.

If the connection is successful, the Wi-Fi status indicator will

come on and remain lit.

To disconnect your refrigerator from your router, press and hold

CONNECT for more than 15 seconds. The <Wi-Fi> and <house>

icons will turn off, indicating that your refrigerator is completely

disconnected from Wi-Fi and your router.

To re-connect your refrigerator to your router and reconnect Wi-Fi,

press and hold CONNECT for 3 seconds on the Home screen.

The Wi-Fi status indicator ( ) on the refrigerator control panel will

blink slowly while your refrigerator and router attempt to connect.

If the connection is successful, the Wi-Fi status indicator will

come on and remain lit.

Press the WPS button on the router. An indicator light will begin

blinking.

HELPFUL TIP: The WPS function on your router is active for

2 minutes. Complete the next step within that timeframe or you

will need to reinitiate WPS.

Press and hold Connect button for 3 seconds on Home screen.

The Wi-Fi status indicator ( ) on the refrigerator control panel

will blink slowly while your refrigerator and router attempt to

connect.

If the connection is successful, the Wi-Fi status indicator will

come on and remain lit.

2. Setup refrigerator

(time-sensitive step)

INSTALLATION INSTRUCTIONS

Unpack the Refrigerator

WARNING

Excessive Weight Hazard

Use two or more people to move and install

refrigerator.

Failure to do so can result in back or other injury.

Remove the Packaging

■ Remove tape and glue residue from surfaces before turning on

the refrigerator. Rub a small amount of liquid dish soap over

the adhesive with your ngers. Wipe with warm water and dry.

■ Do not use sharp instruments, rubbing alcohol, ammable

uids, or abrasive cleaners to remove tape or glue. These

products can damage the surface of your refrigerator.

■ Dispose of/recycle all packaging materials.

Clean Before Using

After you remove all of the packaging materials, clean the inside

of your refrigerator before using it. See the cleaning instructions

in the “Refrigerator Care” section.

Important information to know about glass shelves

and covers:

Do not clean glass shelves or covers with warm water when

they are cold. Shelves and covers may break if exposed to

sudden temperature changes or impact, such as bumping.

Tempered glass is designed to shatter into many small,

pebble-size pieces. This is normal. Glass shelves and covers

are heavy. Use both hands when removing them to avoid

dropping.

Location Requirements

IMPORTANT: This appliances is intended to be used in household

and similar applications such as:

■ Staff kitchen areas in shops, ofce and other working

environments,

■ Farm houses and by clients in hotels, motels and other

residential type environments,

■ Bed and breakfast type environments,

■ Catering and similar non-retail applications.

To ensure proper ventilation for your refrigerator, allow for a

minimum 1/2" (1.25 cm) of space on each side and at the top.

Allow for a minimum 1" (2.54 cm) space behind the refrigerator.

If your refrigerator has an ice maker, allow extra space at the back

for the water line connections. When installing your refrigerator

next to a xed wall, leave a 3³⁄

" (9.5 cm) minimum space between

the refrigerator and wall to allow the door to swing open.

NOTE: This refrigerator is intended for use in a location where

the temperature ranges from a minimum of 55°F (13°C) to a

maximum of 110°F (43°C). The preferred room temperature

range for optimum performance, which reduces electricity usage

and provides superior cooling, is between 60°F (15°C) and 90°F

(32°C). It is recommended that you do not install the refrigerator

near a heat source such as an oven or radiator.

WARNING

Explosion Hazard

Keep flammable materials and vapors, such as

gasoline, away from refrigerator.

Failure to do so can result in death, explosion, or fire.

3³⁄

" (9.5 cm)

1/2" (1.25 cm)

Refrigerator Delivery

■ A minimum door opening of 33" (838 mm) is required. If

door opening is 36" (914 mm) or less, then removal of doors,

drawer, and hinges is required.

■ Cart the refrigerator from the side for all door openings

When Moving Your Refrigerator:

Your refrigerator is heavy. When moving the refrigerator for

cleaning or service, be sure to cover the oor with

cardboard or hardboard to avoid oor damage. Always pull

the refrigerator straight out when moving it. Do not wiggle or

“walk” the refrigerator when trying to move it, as oor

damage could occur.

Remove and Replace Refrigerator Doors

NOTE: Measure the width of your house door opening to see whether or not you need to remove the refrigerator doors to move the

refrigerator into your home. If refrigerator door removal is necessary, see the following instructions.

IMPORTANT: If the refrigerator was previously installed and you are moving it out of the home, before you begin, turn the refrigerator

control off. Unplug the refrigerator or disconnect power. Remove food and adjustable door or utility bins from doors.

Gather the required tools and read all instructions before removing doors.

TOOLS NEEDED: TORX T25

†

screwdriver and a #2 Phillips screwdriver

WARNING

Electrical Shock Hazard

Disconnect power before removing doors.

Failure to do so can result in death or electrical shock.

Water Dispenser

Tubing Connection

Wiring Plug

Top Right Hinge

Top Left Hinge

A. Outer ring

A. TORX T25 screws

B. Ground wire (Do not remove.)

C. Do not remove screws.

90°

Door at 90° Angle

to Cabinet°

A. TORX T25 screws

B. Hinge cover screw

C. Top hinge cover

D. Top hinge

†

TORX and T25 are trademarks of Acument Intellectual Properties, LLC.

Bottom Door Hinge

For your convenience, the refrigerator doors have bottom hinges

with door closers. These closers allow the doors to swing fully

closed with just a gentle push.

IMPORTANT: So that the closers feature will operate properly,

the doors must be removed only when open to a 90° angle to the

front of the cabinet. If one or both doors were not at a 90° angle

when removed, the bottom door hinge must be reset.

90°

Reset the Door Hinge

1. Lift the door from the bottom hinge pin, and place it on a

at surface.

2. Using a TORX T25 screwdriver, remove the bottom hinge with

the bushing from the cabinet.

A. Bushing

B. Hinge base

3. Insert the bottom hinge and bushing into the corresponding

slot in the bottom of the door.

NOTE: Make sure that the base of the hinge is parallel to the

bottom of the door.

A. Hinge base parallel to the bottom edge of the door

4. Turn the hinge until the hinge base is at a 90° angle to the

bottom edge of the door.

A. Hinge base turned to a 90° angle with the bottom edge of the door

5. Remove the hinge from the door. Using a TORX T25

screwdriver, reattach the bottom hinge to the refrigerator

cabinet.

6. The hinge is now reset and prepared for the door to be

replaced. See “Replace Refrigerator Doors” later in

this section.

90°

Remove Refrigerator Doors

WARNING

Electrical Shock Hazard

Disconnect power before removing doors.

Failure to do so can result in death or electrical shock.

Remove Right-Hand Door

1. Unplug refrigerator or disconnect power.

2. Keep the refrigerator doors closed until you are ready to lift

them free from the cabinet.

NOTE: Provide additional support for the refrigerator door

while the hinges are being removed. Do not depend on the

door gasket magnets to hold the door in place while you are

working.

3. Using a Phillips screwdriver, remove the cover from the

top hinge.

WARNING

Excessive Weight Hazard

Use two or more people to move and install

refrigerator.

Failure to do so can result in back or other injury.

A. Top hinge cover screw

B. Top hinge cover

C. TORX T25 screws

D. Top hinge

WARNING

Excessive Weight Hazard

Use two or more people to lift the refrigerator door.

Failure to do so can result in back or other injury.

5. Open the door until it is at a 90° angle to the front of the

cabinet.

6. Lift the refrigerator door from the bottom hinge pin. The top

hinge will come away with the door.

Remove Left-Hand Door

IMPORTANT: The tubing and wiring for the water dispenser run

through the left-hand door hinge, so they must be disconnected

before removing the door.

1. Using a at head screwdriver, remove the cover from the top

hinge.

A. Top hinge cover screw B. Top hinge cover

2. Disconnect the water dispenser tubing located on top of the

door hinge. Firmly pull up on the clasp. Then, pull the tubing

out of the fitting.

NOTE: The water dispenser tubing remains attached to the

left-hand refrigerator door.

3. Disconnect the wiring plug located on top of the door hinge.

■ Grasp each side of the wiring plug. With your left thumb,

press down to release the catch and pull the sections of

the plug apart.

NOTE: Do not remove the green ground wire. It should

remain attached to the door hinge.

A. TORX T25 screws

B. Ground wire (Do not remove.)

4. Using the TORX T25

screwdriver, remove the 2 internal screws

from the top hinge and set aside.

NOTES:

■ Provide additional support for the refrigerator door while

the hinges are being removed. Do not depend on the door

gasket magnets to hold the door in place while you are

working.

5. Lift the refrigerator door from the bottom hinge pin. The top

hinge will come away with the door.

NOTE: It may not be necessary to remove the bottom hinges

and brake feet assemblies to move the refrigerator through a

doorway.

■ Only if necessary, use a TORX T25 screwdriver to remove

the bottom hinges and brake feet screws.

4. Using the TORX T25 screwdriver, remove the 2 screws from

the top hinge and set aside.

Replace Right-Hand Refrigerator Door

1. Set the right-hand door onto the bottom hinge pin.

2. Insert the top hinge pin into the open hole in the top

of the refrigerator door.

3. Using the 3 TORX T25 screws, fasten the hinge

to the cabinet. Do not tighten the screws completely.

Replace Left-Hand Refrigerator Door

IMPORTANT: Do not intertwine the water tubing and wiring

bundles when reconnecting them.

1. Set the left-hand door onto the bottom hinge pin.

2. Using the 3 TORX T25 screws, fasten the hinge to the cabinet.

Do not tighten the screws completely.

3. Reconnect the water dispenser tubing.

Insert the tubing rmly into the tting until it stops. Close the

clasp around the tubing. The clasp snaps into place between

the tting and the collar. Connect blue female side with blue

male side and clasp. Repeat with gray female and gray male

side.

4. Reconnect the electrical wiring.

■ Push together the 2 sections of the wiring plug.

Final Steps

1. Completely tighten the 6 internal TORX T25 screws (3 on the

right-hand door hinge and 3 on the left-hand door hinge).

2. Replace both top hinge covers.

Remove and Replace

Freezer Drawer Fronts

Freezer Drawer

Remove Drawer Front

1. Open the freezer drawer to its full extension.

2. Loosen the 2 top screws that fasten the drawer front to the

drawer glides. The 2 screws (1 on the left-hand side and

1 on the right-hand side) are located inside the drawer front.

3. Remove the 2 screws at the bottom, inside the drawer front

that fasten the drawer front to the drawer glides.

4. Lift up on the drawer front to release the screws from the

drawer glide bracket slot.

A. Drawer glide bracket slots

Replace Drawer Front

1. Pull out the freezer drawer glides to their full extension.

2. Holding the drawer front by its sides, align the top screws,

located at the bottom inside the drawer front, with the drawer

glide bracket slots.

NOTE: It helps if one person holds the drawer glides steady

while another person aligns the drawer front and inserts the

studs into the slots.

A. Drawer front screw

3. Tighten the 2 screws at the top of the drawer front (1 on the

left-hand side and 1 on the right-hand side) and install the

2 screws on the bottom.

Final Steps

1. Plug into a grounded 3 prong outlet.

2. Reset the controls. See the “Using the Controls” section.

3. Return all removable parts and food to the drawers.

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death,

fire, or electrical shock.

WARNING

Electrical Requirements

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death,

fire, or electrical shock.

WARNING

Before you move your refrigerator into its nal location, it is

important to make sure you have the proper electrical connection.

Recommended Grounding Method

A 115 V, 60 Hz, AC only 15 or 20 A fused, grounded electrical

supply is required. It is recommended that a separate circuit

serving only your refrigerator and approved accessories be

provided. Use an outlet that cannot be turned off by a switch. Do

not use an extension cord.

If the supply cord is damaged, it must be replaced by the

manufacturer or its service agent or a similarly qualied person.

Do not use a cord that shows cracks or abrasion damage along

its length or at either the plug or connector end.

IMPORTANT: If this product is connected to a GFCI (Ground Fault

Circuit Interrupter) protected outlet, nuisance tripping of the power

supply may occur, resulting in loss of cooling. Food quality and

avor may be affected. If nuisance tripping has occurred, and if

the condition of the food appears poor, dispose of the food.

NOTE: Before performing any type of installation or cleaning, turn

off cooling, and then disconnect the refrigerator from the electrical

source. When you have nished, reconnect the refrigerator to the

electrical source and turn on cooling. See the “Using the Controls”

section.

Water Supply Requirements

A cold water supply with water pressure between 30 and 120 psi

(207 and 827 kPa) is required to operate the water dispenser and

ice maker.

NOTE: If the water pressure is less than what is required, the ow

of water from the water dispenser could decrease or ice cubes

could be hollow or irregular shaped. If you have questions about

your water pressure, call a licensed, qualied plumber.

Reverse Osmosis Water Supply

IMPORTANT: The pressure of the water supply coming out

of a reverse osmosis system and supplying the water inlet valve

of the refrigerator needs to be between 35 and 120 psi (241 and

827 kPa).

If a reverse osmosis water ltration system is connected to

your home cold water supply, the water pressure to the reverse

osmosis system needs to be a minimum of 40 to 60 psi (276 to

414 kPa).

■ Check to see whether the sediment lter in the reverse

osmosis system is blocked. Replace the lter if necessary.

■ Allow the storage tank on the reverse osmosis system to rell

after heavy use. The tank capacity could be too small to keep

up with the requirements of the refrigerator.

NOTE: Faucet-mounted reverse osmosis systems are

not recommended.

■ If your refrigerator has a water lter, it may further reduce

the water pressure when used in conjunction with a reverse

osmosis system. Remove the water lter. See the “Water

Filtration System” section.

If you have questions about your water pressure, call a licensed,

qualied plumber.

Connect the Water Supply

Read all directions before you begin.

IMPORTANT:

■ Connect to potable water supply only.

■ Plumbing must be installed in accordance with the

International Plumbing Code and any local codes and

ordinances.

■ Copper and PEX tubing connections from the household

water line to the refrigerator are acceptable and will help

avoid off-taste or odor in your ice or water. Check for leaks.

If PEX tubing is used instead of copper, we recommend the

following Part Numbers: W10505928RP (7 ft [2.14 m] jacketed

PEX), 8212547RP (5 ft [1.52 m] PEX), or W10267701RP

(25 ft [7.62 m] PEX).

■ Install tubing only in areas where temperatures will remain

above freezing.

Tools Needed:

Gather the required tools and parts before starting installation.

■ Flat-blade screwdriver

■ 7/16" and 1/2" open-end wrenches or two adjustable

wrenches

■ 1/4" nut driver

NOTE: Do not use a piercing-type or 3/16" (4.76 mm) saddle valve

which reduces water ow and clogs easier.

Do not use with water that is microbiologically unsafe or

of unknown quality without adequate disinfection before

or after the system. Systems certified for cyst reduction

may be used on disinfected waters that may contain

filterable cysts.

4. Now you are ready to connect the copper tubing to the

shut-off valve. Use 1/4" (6.35 mm) O.D. (outside diameter)

soft copper tubing to connect the shut-off valve and the

refrigerator.

■ Ensure that you have the proper length needed for the job.

Be sure both ends of the copper tubing are cut square.

■ Slip compression sleeve and compression nut onto copper

tubing as shown. Insert end of tubing into outlet end squarely

as far as it will go. Screw compression nut onto outlet end with

adjustable wrench. Do not overtighten.

A. Compression sleeve

B. Compression nut

C. Copper tubing

Connect to Refrigerator

Follow the connection instructions specic to your model.

1. Remove plastic cap from water valve inlet port. Attach the

copper tubing to the valve inlet using a compression nut

and sleeve as shown. Tighten the compression nut. Do not

overtighten. Conrm copper tubing is secure by pulling on

copper tubing.

2. Create a service loop with the copper tubing. Avoid kinks

when coiling the copper tubing. Secure copper tubing to

refrigerator cabinet with a “P” clamp.

A. Copper tubing

B. “P” clamp

C. Compression nut

D. Compression sleeve

Complete the Installation

1. Plug into a grounded 3 prong outlet.

2. Flush the water system. See the “Water and Ice Dispensers”

section.

NOTE: Allow 24 hours to produce the rst batch of ice. Discard

the rst 3 batches of ice produced. Allow 3 days to completely

ll the ice storage bin.

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death,

fire, or electrical shock.

WARNING

3. Turn on water supply to refrigerator and check for leaks.

Correct any leaks.

4. If ice is desired, turn on the ice maker.

5. Place the free end of the tubing into a container or sink and

turn on main water supply to ush out tubing until water is

clear. Turn off shut-off valve on the water pipe.

NOTE: Always drain the water line before making the nal

connection to the inlet of the water valve to avoid possible

water valve malfunction.

6. Bend the copper tubing to meet the water line inlet which

is located on the back of the refrigerator cabinet as shown.

Leave a coil of copper tubing to allow the refrigerator to be

pulled out of the cabinet or away from the wall for service.

Connect to Water Line

IMPORTANT: If you have turned the refrigerator on before the

water was connected, turn off the ice maker.

1. Unplug refrigerator or disconnect power.

2. Turn off main water supply. Turn on nearest faucet long

enough to reduce water pressure in the water line.

3. Use a quarter-turn shut-off valve or the equivalent, served by

a 1/2" household supply line.

NOTE: To allow sufcient water ow to the refrigerator, a minimum

1/2"

(12.7 mm) size household supply line is recommended.

A. Sleeve

B. Nut

C. Copper tubing (to refrigerator)

D. Household supply line (1/2" minimum)

A. Shoulder screws

B. Setscrews inside the handle

Handle Installation and Removal

Parts Included: refrigerator door handles (2), freezer drawer

handle (1), 1/8" hex key, spare setscrew(s)

NOTE: The freezer drawer handle is shorter than the refrigerator

door handles. Handle style may vary by model.

Install Handles

Refrigerator Doors

NOTE: Handle mounting setscrews are preinstalled inside

the handle.

1. Remove the handles from the packaging inside the

refrigerator and place them on a soft surface.

2. Open a refrigerator compartment door. On the closed

door, place a handle onto the shoulder screws so that

the setscrews are facing the adjacent door.

3. Firmly push the handle toward the door until the handle base

is ush against the door.

4. While holding the handle, insert the short end of the hex key

into the upper hole and slightly rotate the hex key until key is

engaged in the setscrew.

5. Using a clockwise motion, tighten the setscrew just until

setscrew begins to contact the shoulder screw. Do not

fully tighten.

6. Repeat steps 4 and 5 to fasten the lower setscrew.

7. Once both setscrews have been partially tightened as

instructed in the previous steps, fully tighten both setscrews.

IMPORTANT: When the screws feel tight, tighten them an

additional quarter turn. The handle is not properly installed

without this extra tightening.

A. Shoulder screw

B. Setscrews inside the handle

2. Firmly push the handle toward the drawer until the handle

base is ush against the drawer.

3. Insert the short end of the hex key into the left-hand hole and

slightly rotate the hex key until key is engaged in the setscrew.

4. Using a left-to-right motion, tighten the setscrew a quarter

turn at a time just until setscrew begins to contact the

shoulder screw. Do not fully tighten.

5. Repeat steps 3 and 4 to fasten the right-hand setscrew to

the shoulder screw.

6. Once both setscrews have been partially tightened as

instructed in the previous steps, fully tighten both setscrews.

IMPORTANT: When the screws feel tight, tighten them an

additional quarter turn. The handle is not properly installed

without this extra tightening.

7. Save the hex key and all instructions.

Remove the Handles

1. While holding the handle, insert the short end of the hex key

into a setscrew hole and slightly rotate the hex key until it is

engaged in the setscrew.

2. Using a right-to-left motion, loosen the setscrew a quarter

turn at a time.

3. Repeat steps 1 and 2 for the other setscrew. Slowly pull

the handle away from the door or drawer.

4. If necessary, use a Phillips screwdriver to remove the

shoulder screws from the door.

8. Repeat steps 2 through 7 to install the other handle onto

the adjacent refrigerator door.

Freezer Drawer

1. With the drawer closed, place the handle onto the shoulder

screws so that the setscrews are facing down toward the

oor.

Refrigerator Leveling

and Door Closing

The base grille covers the adjustable brake feet and roller

assemblies located at the bottom of the refrigerator below the

freezer drawer. Before making any adjustments, remove the base

grille and move the refrigerator to its nal location.

Tools Needed: 1/4" hex driver

Tools Provided: 1/8" hex-key

1. Use a 1/4" hex driver to remove both screws in base grille.

2. Remove the base grille. Using both hands, grasp the grille

rmly and pull it toward you. Open the freezer drawer to

access the brake feet.

NOTE: To allow the refrigerator to roll easier, raise the brake

feet by turning them counterclockwise. The front rollers will

be touching the oor.

7. Make sure the refrigerator is steady. If the refrigerator seems

unsteady or rolls forward when a door or drawer is pulled

open, adjust the brake feet.

To Steady the Refrigerator:

■ Open the freezer drawer. Using a 1/4" hex driver, turn both

brake feet clockwise the same amount until the brake feet

are snug against the oor. Check again. If not satised,

continue to adjust the brake feet by half turns of the screw

until the refrigerator does not roll forward when the drawer

is opened.

NOTE: Having someone push against the top of the

refrigerator takes some weight off the brake feet. This makes

it easier to turn the screws. Do not push with excessive force

that tilts the refrigerator.

8. Replace the base grille by aligning the ends of the grille with

the leveling assemblies on each side and snapping the grille

into place. Use a 1/4" hex driver to reinstall screws.

A. Bottom hinge pin

B. 1/8"hex-key wrench

■ Continue to turn the alignment screw until the doors are

aligned.

3. Move the refrigerator to its nal location.

4. Using the 1/4" hex driver, lower the brake feet. Turn them

clockwise until the rollers are off the oor and both brake feet

are snug against the oor. This keeps the refrigerator from

rolling forward when opening the refrigerator doors or freezer

drawer.

IMPORTANT: If you need to make further adjustments

involving the brake feet, you must turn both brake feet the

same amount to keep the refrigerator level.

5. Use a level to make sure the refrigerator is level from side to

side and front to back.

6. Make sure the doors are even at the top and that the space

between the bottom of the refrigerator doors and the top of

the freezer drawer is even. If necessary, align the doors.

To Align the Doors:

■ Keeping both refrigerator doors closed, pull out the freezer

drawer. Locate the bottom hinge pin of the right-hand

refrigerator door. The alignment screw is inside the bottom

hinge pin.

■ Insert the short end of the 1/8" hex-key wrench (packed with

the Door Handle Installation Instructions) into the bottom hinge

pin until it is fully engaged in the alignment screw.

To raise the refrigerator door, turn the hex key to the right.

To lower the door, turn the hex key to the left.

Do not use with water that is microbiologically unsafe or

of unknown quality without adequate disinfection before

or after the system. Systems certified for cyst reduction

may be used on disinfected waters that may contain

filterable cysts.

Replace and Install the Water Filter

The water lter should be replaced every 6 months based on

a ow rate of .50 gpm-.60 gpm (1.89-2.27 lpm) that lters

200 gallons (757 L) of water.

To order a replacement lter, contact us. See the “Accessories”

section in the Use and Care Guide for information on ordering.

FILTERS AND ACCESSORIES

Water Filtration System

1. Push the water lter door to open, located bottom left of

refrigerator compartment.

2. Twist the water lter and turn 90° counterclockwise to unlock.

3. Pull the lter out of the housing.

4. Remove the water lter cap from the water lter being

replaced.

5. Install the water lter cap onto the new lter. Be sure to align

the arrows so the groves in lter align with ribs in lter cap.

6. Insert the lter into the housing.

7. Twist the water lter and turn 90° clockwise until it locks into

place and the arrows are aligned.

8. Push the water lter door closed.

The Water Filter Status Lights

The Water Filter status lights will help you know when to change

your water lter. The app will also send notications to your

mobile device and tell you the status of the JennAir

app for

the lter life.

■ ORDER FILTER (yellow) - It is almost time to change the

water lter. “Order Filter” display is ON all of the time but

OFF in Showroom mode and Sabbath mode.

■ REPLACE FILTER (red) - Replace the water lter. While you

are dispensing water, “Replace Filter” will blink 7 times and

an alert tone will sound 3 times.

NOTE: “REPLACE FILTER” will remain illuminated if the lter

is not reset on the user interface (UI).

■ RESET FILTER - Touch MAX COOL and MAX ICE for

3 seconds to reset water lter. The display will do a

3-second countdown, then ash the icon and play a tone.

Install FreshFlow™ Air Filter

An air lter is 15 times more powerful than baking soda at

reducing common food odors inside the refrigerator.

On some models, your refrigerator’s accessory packet includes

an air lter which must be installed prior to use.

Installing the FreshFlow™ Air Filter

Install the air lter behind the vent cover, located on the rear wall

near the middle of the refrigerator.

1. Remove the air lter from its packaging.

2. Pull out plastic cover over the vented cover.

NOTE: When cover is removed for the rst time, a small foam part

the size of the lter will need to be removed and discarded.

3. Snap lter into place, close cover.

A. Air filter

Replacing the FreshFlow™ Air Filter

The disposable air lter should be replaced every 6 months. Some

air lters have an indicator that replacement is needed.

To order a replacement air lter, contact us. See the “Accessories”

section in the Use and Care Guide for information on ordering.

1. Open cover and remove the used air lter by squeezing in on

the side tabs.

2. Install the new air lter using the instructions in the previous

sections.

Sensitivity

to Ethylene

Ethylene

Production

Apples High Very High

Asparagus Medium Very Low

Berries Low Low

Broccoli High Very Low

Cantaloupe Medium High

Carrots Low Very Low

Citrus Fruit Medium Very Low

Grapes Low Very Low

Lettuce High Very Low

Pears High Very High

Spinach High Very Low

Installing the Produce Preserver

For your convenience, the suction-mounted produce preserver

can be installed in either the crisper or the refrigerated drawers.

CAUTION: IRRITANT

MAY IRRITATE EYES AND SKIN. DANGEROUS FUMES

FORM WHEN MIXED WITH OTHER PRODUCTS.

Do not mix with cleaning products containing ammonia,

bleach or acids. Do not get in eyes, on skin or clothing. Do

not breathe dust. Keep out of reach of children.

FIRST AID TREATMENT: Contains potassium

permanganate. If swallowed, call a Poison Control Center or

doctor immediately. Do not induce vomiting. If in eyes, rinse

with water for 15 minutes. If on skin, rinse with water.

1. Wash the interior of a drawer with a solution of mild dish soap

and warm water and dry thoroughly.

2. Find the package containing the Produce Preserver inside the

refrigerator and install the Produce Preserver into the drawer,

according to the instructions provided in the package.

Replacing the Produce Preserver

The disposable packet(s) should be replaced every 6 months or

when the status indicator changes completely from white to red.

To order replacements, contact us. See the “Accessories” section

for information on ordering.

1. Remove the used packets from the produce preserver

housing.

2. Remove the used status indicator.

3. Install the replacement packets and status indicator using the

instructions included in the package.

Install Produce Preserver

(on some models)

The produce preserver absorbs ethylene to slow the ripening

process of many produce items. As a result, certain produce items

will stay fresh longer.

Ethylene production and sensitivity varies, depending on the type

of fruit or vegetable. To preserve freshness, it is best to separate

produce with sensitivity to ethylene from fruits that produce

moderate-to-high amounts of ethylene.

La page charge ...

JennAir JFFCC72EHL Le manuel du propriétaire

Marque: JennAir

Modèle: JFFCC72EHL

Catégorie: Frigos

Taper: Le manuel du propriétaire

Télécharger le PDF

rapport

dans d''autres langues

English: JennAir JFFCC72EHL Owner's manual
español: JennAir JFFCC72EHL El manual del propietario

JennAir JFFCC72EHL Le manuel du propriétaire

JennAir JFFCC72EHL Le manuel du propriétaire

dans d''autres langues

Documents connexes

Autres documents