Wolf CI243CB Le manuel du propriétaire

Taper
Le manuel du propriétaire
Induction | Electric Cooktops Use & Care Guide
2
|
Wolf Customer Care 800.222.7820
Contents
4 Safety Precautions
6 Induction Cooktop Features
7 Electric Cooktop Features
8 Cooktop Operation
17 Care Recommendations
18 Troubleshooting
19 Wolf Warranty
INDUCTION | ELECTRIC COOKTOPS
Customer Care
The model and serial number are printed on the enclosed
product registration card. Both numbers are also listed on
the product rating plate. Refer to pages 6–7 for rating plate
location. For warranty purposes, you will also need the date
of installation and name of your authorized Wolf dealer.
Record this information below for future reference.
If your product ever needs attention, be sure to use a Wolf
factory certied service provider recommended by our
customer care center, or select one from our list of providers
available at wolfappliance.com/locator. All factory certi-
ed service providers are carefully selected and thoroughly
trained by us.
SERVICE INFORMATION
Model Number
Serial Number
Date of Installation
Certied Service Name
Certied Service Number
Authorized Dealer
Dealer Number
Important Note
To ensure this product is installed and operated as safely
and efciently as possible, take note of the following types
of highlighted information throughout this guide:
IMPORTANT NOTE highlights information that is especially
important.
CAUTION indicates a situation where minor injury or product
damage may occur if instructions are not followed.
WARNING states a hazard that may cause serious injury or
death if precautions are not followed.
IMPORTANT NOTE: Throughout this guide, dimensions in
parentheses are millimeters unless otherwise specied.
wolfappliance.com
|
3
Thank You
Thank you for your purchase. We look forward to being part of your home for decades
to come. As a third-generation family-owned company, we take a very personal stake in
the preparation of your family’s food. We built our business and our reputation on helping
families serve the nest food possible.
With your purchase, you receive one of the strongest warranties in the appliance industry.
Take a moment to read the full warranty statement on page 19. It’s also important to
register your Wolf appliance to ensure that you don’t miss out on exclusive owner ben-
ets, such as; assurance that you will be taken care of in the unlikely event that service
becomes necessary during the warranty period, and a proof-of-purchase record in case
of a home insurance claim. You may register by one of the following options:
Mail in the completed Wolf product registration card.
Register online at wolfappliance.com/register and create a personalized My Sub-Zero/
Wolf account using the serial number on your product.
Register by phone by calling Wolf Customer Care at 800-222-7820.
As a Wolf owner, you can count on ongoing support, day in and day out. Our customer
care center is available 24 hours a day, seven days a week and staffed by knowledgeable
product experts at our factory in Madison, Wisconsin. Should the need arise, simply call
800-222-7820 and speak with one of our product experts. They will help troubleshoot any
issues you might have.
We are condent this guide will answer your questions about the features, operation,
and maintenance of your Wolf, but if you have additional questions, please contact us at
800-222-7820 or visit us online at wolfappliance.com.
4
|
Wolf Customer Care 800.222.7820
SAFETY PRECAUTIONS
GENERAL SAFETY PRECAUTIONS
Wear proper apparel. Never let loose clothing or
other ammable materials come in contact with the
elements while in operation. Fabric may ignite and
result in personal injury.
Use only dry pot holders when removing pans
from the cooktop. Wet or damp pot holders on hot
surfaces may result in burns from steam. Do not let
pot holders touch hot heating elements.
Select cookware of the proper size, material and
construction for the particular type of cooking
being done. This unit is equipped with heating
elements of different size. Refer to element rating
on pages 6–7.
Always turn pan handles inward so they do not
extend over adjacent work areas, heating elements
or edges of cooktop to reduce the risk of burns,
ignition of ammable materials and spillage due to
unintentional contact with pan. Do not turn handles
toward the room, where they may be bumped or
easily hit.
Never heat an empty pan. It may damage the
cooktop or cookware and overheat the unit.
Do not heat cookware with water droplets on the
outside of the pan. The droplets may begin to boil
and splatter. Cookware should always be dry.
Do not use aluminum foil on the surface of the
cooktop.
Never use the cooktop to warm or heat a room.
IMPORTANT INSTRUCTIONS
IMPORTANT NOTE: Read all safety instructions
before using this appliance.
Read this use & care guide carefully before using
your new cooktop to reduce the risk of re, electric
shock or injury to persons.
Ensure proper installation and servicing. This appli-
ance must be properly installed and grounded by
a qualied technician. Have the installer show you
the location of the circuit breaker or fuse so that
you know where to turn off power.
Warranty service must be performed by Wolf
factory certied service.
Before performing any service, disconnect the
power supply to the cooktop by switching off the
circuit breaker or removing the fuse.
IMPORTANT NOTE: Performance may be compro-
mised if the electrical supply is less than 240 volts.
wolfappliance.com
|
5
SAFETY PRECAUTIONS
IMPORTANT INSTRUCTIONS
GENERAL SAFETY PRECAUTIONS
When using the cooktop, do not touch the glass
surface directly above or adjacent to the heating
elements or induction zones. The glass surface
may become hot enough to cause burns.
Do not leave children alone or unattended in the
area where the cooktop is in use. Never allow
children to sit or stand on the appliance. Do not let
children play with the cooktop.
Do not store items of interest to children above or
at the back of the cooktop, as they could climb on
the appliance to reach items and be injured.
Do not repair or replace any part of the appliance
unless it is specically recommended in literature
you received. All service should be referred to Wolf
factory certied service.
Do not use water on grease res. Smother
the ame or use a dry chemical or foam-type
extinguisher.
Never leave the cooktop unattended when using
high heat settings. Boilovers and greasy spillovers
may smoke or ignite.
Do not operate the cooktop if the glass-ceramic
surface is broken or severely pitted. Call Wolf
factory certied service to repair the cooktop.
Do not store ammable materials near hot compo-
nents or let grease or other ammable substances
accumulate on the cooktop.
Do not clean the cooktop while it is still hot.
If using a damp sponge or cloth, wait until the
cooktop has cooled sufciently to prevent steam
burns. Also, some cleaners give off noxious fumes
when applied to hot surfaces. Refer to care recom-
mendations on page 17.
Do not use a griddle, open roaster or sh poacher
across two heating elements unless the bridge
element is turned on. This type of use without
the bridge element turned on could damage or
crack the glass. Refer to bridge element on
page 13.
Do not block the cooling fan exhaust or intake
vents. The cooling fan automatically turns on to
cool internal parts. It may continue to run even
after the cooktop has been turned off.
CALIFORNIA PROPOSITION 65
WARNING
This product may contain chemicals known to the
state of California to cause cancer or reproductive
harm.
6
|
Wolf Customer Care 800.222.7820
INDUCTION COOKTOP
In induction cooking, the electricity ows through a coil to
produce a magnetic eld under the glass-ceramic surface.
When an induction-compatible pan is placed on the
cooktop, currents are induced in the pan and instant heat is
generated. Cookware made of magnetic materials, such as
cast iron or magnetic stainless steel is required for induction
cooking.
ELEMENT RATING
15" INDUCTION COOKTOP W
8
1
/2" (216) 2300 | 3150 boost
6"
(152) 1400
24" INDUCTION COOKTOP W
10
1
/2" (267) 2600 | 3150 boost
(2) 8"
(203) 2100 | 3000 boost
30" INDUCTION COOKTOP W
10
1
/2" (267) 2600 | 3150 boost
(2) 8"
(203) 2100 | 3000 boost
6"
(152) 1400
36" INDUCTION COOKTOP W
10
1
/2" (267) 2600 | 3700 boost
(4) 8"
(203) 2100 | 3000 boost
COOKTOP FEATURES
Induction Cooktop Features
FEATURES
1
Product Rating Plate (bottom of cooktop)
2
Control Panel
3
Induction Element
4
Bridge Element
5
Timer
6
Control Panel Lock
36" Induction Cooktop (CI365C shown).
4
1
2
6
3
5
wolfappliance.com
|
7
ELECTRIC COOKTOP
Wolf electric cooktops operate by using high-frequency
pulsation, cycling the heating elements between zero power
and full power. As the heat is increased on the control panel,
the element will stay at full power for longer periods and
have shorter periods of zero power.
ELEMENT RATING
15" ELECTRIC COOKTOP W
8" (203) Dual 700 | 2200
5
1
/2" (140) Single 1200
30" ELECTRIC COOKTOP W
10
1
/2" (267) Triple 1050 | 1950 | 2700
(2) 5
1
/2" (140) Singles 1200
6
1
/2" (165) Single with Oval 2400
36" ELECTRIC COOKTOP W
10
1
/2" (267) Triple 1050 | 1950 | 2700
8" (203) Dual 700 | 2200
5
1
/2" (140) Single 1200
(2) 7"
(178) Singles with Bridge 4400
Electric Cooktop Features
FEATURES
1
Product Rating Plate (bottom of cooktop)
2
Control Panel
3
Single Element
4
Dual-Zone Element
5
Triple-Zone Element
6
Bridge Element
7
Timer
8
Control Panel Lock
COOKTOP FEATURES
36" Electric Cooktop (CE365T shown).
6
1
2
8
5
4
7
3
8
|
Wolf Customer Care 800.222.7820
Getting Started
We know you are eager to start cooking, but before you
do, please take some time to read this use & care guide.
Whether you are an occasional cook or an expert chef, it
will be to your benet to familiarize yourself with the safety
practices, features, operation and care recommendations of
your Wolf induction or electric cooktop.
To ensure all residual oil from the manufacturing process
has been removed, clean the cooktop thoroughly with hot
water and a mild detergent prior to use. Rinse and dry with
a soft cloth. Refer to care recommendations on page 17.
Cooktop Operation
CONTROL PANEL
The control panel features illuminated touch controls that
are invisible when the cooktop is off. A power level indicator
for each control displays the heat setting from SIM (MLT) to
HI. Each control is positioned to the corresponding heating
element. Refer to the illustration below.
Indicators on the control panel will illuminate to indicate
specic cooktop operation. Some indicators are unique to
either induction or electric cooktops. Refer to the charts on
the following page.
CAUTION
Do not place hot cookware directly over the control
panel.
COOKTOP OPERATION
Touch controls.
ELEMENT
CONTROL
wolfappliance.com
|
9
Cooktop Operation
CONTROL PANEL INDICATORS
INDUCTION COOKTOP
Control Panel Lock
Element(s) On
Hot Surface
Timer Set
Boost Mode
Front-to-Back Bridge
Side-to-Side Bridge
All Bridge
ELECTRIC COOKTOP
Control Panel Lock
Element(s) On
Hot Surface
Timer Set
Zone 2
Zone 3
Oval Element
Bridge
COOKTOP OPERATION
CONTROL PANEL LOCK
The control panel lock feature prevents unwanted cooktop
operation. Touch and hold LOCK for three seconds to lock
and unlock the control panel.
will illuminate when the
control panel is locked.
The control panel will automatically lock after 10 minutes
of inactivity. This automatic lock feature can be disabled
through the extended options menu. Refer to page 16.
When the cooktop is powered up for the rst time and after
a power outage, the cooktop will default to lock mode.
10
|
Wolf Customer Care 800.222.7820
Cooktop Operation
POWER LEVEL INDICATOR
When an element is activated, a power level indicator will
illuminate above the corresponding control indicating the
level of heat. The lowest heat is represented by the small
ame, varying levels of heat by additional indicators (dots),
and the highest heat by all indicators including the large
ame. Refer to the chart and illustration below.
Power level indicator.
COOKTOP OPERATION
SETTING POWER LEVEL USES
Melt 1 (small ame)
indicator
Melting butter, holding
chocolate and sauces.
Simmer 2–6 indicators Simmering sauces and
steaming rice.
Medium 6–7 indicators Making French toast and
pancakes, heating milk, cream
sauces, soups and gravies.
Medium High 7-8 indicators Sauteing, browning and frying.
High 8–10 (large ame)
indicators
Boiling water, searing meat and
canning.
wolfappliance.com
|
11
BOOST MODE (INDUCTION)
For induction cooktops, boost mode boosts power on one
element by diverting power from an adjacent element. If
the adjacent element is on high, the power output will be
reduced. The reduction in power will be displayed on the
power level indicator of the adjacent element. Refer to the
illustration below.
will illuminate when an element is in
boost mode.
Boost mode will deactivate automatically after approxi-
mately 15 minutes of continuous operation and can be
reactivated if desired.
Cooktop Operation
SINGLE ELEMENT AND INNER ZONE
Setting controls:
1 To activate a heating element, touch ON/OFF for the
desired single element on the control panel. Power level
indicator will ash and all indicators for that zone will
ash. Refer to the illustration below.
2 To complete the activation, touch HI for highest heat,
SIM (MLT) for lowest heat, BOOST (induction) to activate
boost mode, or touch desired power level indicator.
3 To change heat setting while the element is on, touch or
slide to desired power level.
4 To turn element off, touch ON/OFF.
IMPORTANT NOTE: For induction cooktops only, if no
cookware or an incompatible pan is placed on an induction
element after activation, the control will ash for 30 sec-
onds, then the element will turn off automatically.
COOKTOP OPERATION
Element activation.
ON/OFF
Boost mode.
BOOST
12
|
Wolf Customer Care 800.222.7820
Cooktop Operation
DUAL-ZONE OR OVAL ELEMENT (ELECTRIC)
Setting controls:
1 To activate dual-zone or oval element, touch ON/OFF on
the control panel. Power level indicator will ash and all
indicators for that zone will ash.
2 Set desired heat level for inner zone as described
on page 11. Outer zones cannot be turned on indepen-
dently of inner zone.
3 Touch ZONE 2 or OVAL. Outer zone will be set to the
same heat setting as inner zone.
or will illumi-
nate to indicate outer zone is on. Refer to the illustration
below.
4 Change heat setting for the entire dual-zone or oval
element the same as for a single element. Both zones
maintain the same heat setting.
5 To turn outer zone off, touch ZONE 2 or OVAL. To turn
the entire element off, touch ON/OFF.
TRIPLE-ZONE ELEMENT (ELECTRIC)
Setting controls:
1 To activate triple-zone element, touch ON/OFF on the
control panel. Power level indicator will ash and all
indicators for that zone will ash.
2 Set desired heat level for inner zone as described
on page 11. Outer zones cannot be turned on indepen-
dently of inner zone.
3 Touch ZONE 2. Middle zone will be set to the same
heat setting as inner zone.
will illuminate to indicate
middle zone is on.
4 Touch ZONE 3. Outer zone will be set to the same heat
setting as inner and middle zones.
will illuminate to
indicate outer zone is on. Refer to the illustration below.
5 Change heat setting for the entire triple-zone element the
same as for a single element. All three zones maintain
the same heat setting.
6 To turn outer zone off, touch ZONE 3. To turn middle
zone off, touch ZONE 2. To turn the entire element off,
touch ON/OFF.
COOKTOP OPERATION
Dual-zone element activation.
ZONE 2
Triple-zone element activation.
ZONE 2 ZONE 3
wolfappliance.com
|
13
Cooktop Operation
BRIDGE ELEMENT (INDUCTION)
Setting controls:
1 To activate bridge, select desired power level on one of
the single elements.
2 Touch BRIDGE between corresponding element con-
trols to bridge elements front to back, BRG to bridge
elements side to side, or ALL BRIDGE to bridge all
elements.
, or will illuminate respectively.
3 To change power level, adjust the power level on any
active bridged element.
4 To turn off, touch ON/OFF on any active bridged
element.
For 36" induction cooktops, ALL BRIDGE should be used
for cookware larger than 12"
(305) in diameter. For smaller
cookware, use the right rear element.
COOKTOP OPERATION
Bridge element activation.
BRIDGE
BRIDGE ELEMENT (ELECTRIC)
Setting controls:
1 To activate bridge, select desired power level on one of
the single elements.
2 Touch BRIDGE. will illuminate.
3 To change power level, adjust the power level on either
active bridged element.
4 To turn off, touch ON/OFF on either active bridged
element.
14
|
Wolf Customer Care 800.222.7820
Cooktop Operation
GRIDDLE USE
The bridge element provides an oblong heating area for use
with a griddle, open roaster or sh poacher.
To preheat a griddle, set the bridge element power level to
high for ve minutes, then reduce for cooking.
CAUTION
A griddle, open roaster or sh poacher should not be
used when the bridge element is off or with any other
combination of heating elements.
COOKTOP OPERATION
TIMER
The timer can be set in one-minute increments up to 99
minutes. Once a time is set,
will illuminate on the control
panel and the countdown is visible on the timer display. The
timer is independent from the cooktop. Refer to the illustra-
tion below.
Setting timer:
1 Touch TIMER.
2 Touch and hold + or – until desired time is shown in the
timer display. Timer will begin the countdown in minutes.
3 Timer will chime with one minute left and completes the
countdown in seconds.
4 When complete, timer will chime and continue to chime
until TIMER is touched.
Timer controls.
TIMER
wolfappliance.com
|
15
COOKTOP OPERATION
Cooktop Operation
HOT SURFACE INDICATOR
will illuminate on the control panel and may remain
illuminated even when the cooktop is off.
ALL OFF
When one or more heating elements are on, will illu-
minate on the control panel. To turn off all elements at the
same time, touch ALL OFF.
16
|
Wolf Customer Care 800.222.7820
Cooktop Operation
EXTENDED OPTIONS
The extended options feature allows the user to set prefer-
ences for volume, tone, control panel lock and Sabbath
feature.
Setting adjustment:
1 While unit is off and unlocked, touch and hold ALL OFF
for ve seconds.
2 Power level 1 on the rear element control will be dis-
played and ‘VO’ will appear on the timer display.
Touch SIM (MLT) or HI on the front element control to
adjust volume.
3 Touch + on the timer control to adjust tone. Power level
2 on the rear element control will be displayed and ‘Fr’
will appear on the timer display.
Touch SIM (MLT) or HI on the front element control to
adjust tone.
4 Touch + on the timer control to adjust automatic control
panel lock. Power level 3 on the rear element control will
be displayed and ‘Lo’ will appear on the timer display.
Touch SIM (MLT) or HI on the front element control to
turn automatic lock feature off or on respectively.
5 Touch + on the timer control to enter Sabbath mode
(electric cooktop only). Power level 4 on the rear element
control will be displayed. Touch HI on the front element
control to initiate Sabbath feature. ‘SA’ will appear on the
timer display.
Touch SIM (MLT) on the front element control to activate
or deactivate the feature.
6 Touch ALL OFF at any time while in extended options to
conrm settings and return cooktop to idle.
COOKTOP OPERATION
Sabbath
(ELECTRIC COOKTOP)
This appliance is certied by Star-K to meet strict religious
regulations in conjunction with specic instructions found
on www.star-k.org.
wolfappliance.com
|
17
CARE RECOMMENDATIONS
Care Recommendations
CLEANING
Stainless steel Use a nonabrasive stainless steel cleaner and apply with a soft lint-free cloth. To bring out the natural
luster, lightly wipe surface with a water-dampened microber cloth followed by a dry polishing chamois.
Always follow the grain of stainless steel.
Control panel Use a spray degreaser to remove ngerprints and food soil. Spray on a cloth before wiping panel.
IMPORTANT NOTE: Do not spray cleaners directly on the control panel.
Glass-ceramic surface Allow to cool. Use a spray degreaser to remove ngerprints and a non-abrasive Ceran® cooktop cleaner
for food soil. Do not allow any item that could melt to come in contact with the glass-ceramic surface when
hot. If this occurs, use the razor blade scraper provided with the cooktop to remove.
18
|
Wolf Customer Care 800.222.7820
TROUBLESHOOTING
Troubleshooting
OPERATION
Cooktop does not operate.
Verify power is on.
Verify electrical power to cooktop and home circuit
breaker is on.
Cooktop is in lock mode. Touch and hold LOCK for three
seconds to unlock control panel.
Cooktop will automatically turn off after 2 hours of con-
tinual use (high), 6 hours (medium) and 8 hours (simmer),
except in Sabbath mode.
Cooktop temperature issue.
Contact Wolf customer care at 800-222-7820 for
recommendations.
Wolf, Wolf & Design, Wolf Gourmet, W & Design and the color red as applied to knobs are registered trademarks and service marks of Wolf Appliance, Inc. Sub-Zero,
Sub-Zero & Design, Dual Refrigeration, The Living Kitchen, Great American Kitchens The Fine Art of Kitchen Design, and Ingredients are registered trademarks and service marks
of Sub-Zero, Inc. All other trademarks or registered trademarks are property of their respective owners in the United States and other countries.
SERVICE
Maintain the quality built into your product by contacting
Wolf factory certied service. For the name of the
nearest Wolf factory certied service, check the contact
& support section of our website, wolfappliance.com or
call Wolf customer care at 800-222-7820.
When contacting service, you will need the model and
serial number of your product. Both numbers are listed
on the product rating plate. Refer to pages 6–7 for rating
plate location.
For warranty purposes, you will also need the date of
installation and name of your authorized Wolf dealer. This
information should be recorded on page 2 of this guide.
Wolf Appliance Residential Limited Warranty
FOR RESIDENTIAL USE
FULL TWO YEAR WARRANTY*
For two years from the date of original installation, this Wolf Appliance product warranty covers all parts
and labor to repair or replace, under normal residential use, any part of the product that proves to be
defective in materials or workmanship. All service provided by Wolf Appliance under the above warranty
must be performed by Wolf factory certied service, unless otherwise specied by Wolf Appliance, Inc.
Service will be provided during normal business hours.
LIMITED FIVE YEAR WARRANTY
For ve years from the date of original installation, Wolf Appliance will repair or replace the following
parts that prove to be defective in materials or workmanship: gas burners (excludes appearance), electric
heating elements, blower motors (ventilation hoods), electronic control boards, magnetron tubes and
induction generators. If the owner uses Wolf factory certied service, the service provider will repair or
replace these parts with the owner paying for all other costs, including labor. If the owner uses non-certi-
ed service, the owner must contact Wolf Appliance, Inc. (using the information below) to receive repaired
or replacement parts. Wolf Appliance will not reimburse the owner for parts purchased from non-certied
service or other sources.
TERMS APPLICABLE TO EACH WARRANTY
The warranty applies only to products installed for normal residential use. The warranty applies only to
products installed in any one of the fty states of the United States, the District of Columbia or the ten
provinces of Canada. This warranty does not cover any parts or labor to correct any defect caused by
negligence, accident or improper use, maintenance, installation, service or repair.
THE REMEDIES DESCRIBED ABOVE FOR EACH WARRANTY ARE THE ONLY ONES THAT WOLF APPLIANCE,
INC. WILL PROVIDE, EITHER UNDER THIS WARRANTY OR UNDER ANY WARRANTY ARISING BY OPERATION
OF LAW. WOLF APPLIANCE, INC. WILL NOT BE RESPONSIBLE FOR ANY CONSEQUENTIAL OR INCIDEN-
TAL DAMAGES ARISING FROM THE BREACH OF THIS WARRANTY OR ANY OTHER WARRANTY, WHETHER
EXPRESS, IMPLIED OR STATUTORY.
Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above
limitation or exclusion may not apply to you. This warranty gives you specic legal rights and you may also
have other legal rights that vary from state to state.
To receive parts and/or service and the name of Wolf factory certied service nearest you, contact Wolf
Appliance, Inc., P.O. Box 44848, Madison, WI 53744; check the contact & support section of our website,
wolfappliance.com, email us at [email protected] or call 800-222-7820.
*Stainless steel (doors, panels, handles, product frames and interior surfaces) are covered by a limited
60-day parts and labor warranty for cosmetic defects.
*Replacement lters for ventilation hood recirculating kits are not covered by the product warranty.
2
|
Atención al cliente de Wolf 800.222.7820
Contenido
4 Precauciones de seguridad
6 Funciones de la parrilla de inducción
7 Funciones de la parrilla eléctrica
8 Funcionamiento de la parrilla
17 Recomendaciones sobre el cuidado
18 Resolución de problemas
19 Garantía de Wolf
PARRILLAS DE INDUCCIÓN Y ELÉCTRICAS
Atención al cliente
El modelo y número de serie están impresos en la tarjeta
de registro del producto adjunta. Los dos números también
aparecen en la placa de datos del producto. Consulte las
páginas 6 a 7 para encontrar la placa de datos. Para nes
de la garantía, usted también necesitará la fecha de insta-
lación y el nombre de su distribuidor autorizado de Wolf.
Anote esta información abajo para referencia futura.
Si su producto alguna vez necesita servicio asegúrese
de usar un proveedor de servicios certicado por Wolf y
recomendado por nuestro centro de atención al cliente,
o seleccione uno de nuestra lista de proveedores en
wolfappliance.com/locator. Todos los proveedores de los
centros de servicio autorizados han sido cuidadosamente
seleccionados y entrenados a fondo por nosotros.
INFORMACIÓN PARA SERVICIO
Número de modelo
Número de serie
Fecha de instalación
Nombre de servicio certicado
Número de servicio certicado
Distribuidor autorizado
Número de distribuidor
Aviso importante
Para garantizar que este producto se instale y opere de
la forma más segura y eciente posible, tome nota de los
siguientes tipos de información resaltada en esta guía:
AVISO IMPORTANTE señala la información que es especial-
mente importante.
PRECAUCIÓN indica una situación en la que se pueden
sufrir heridas leves o provocar daños al producto si no se
siguen las instrucciones.
ADVERTENCIA indica peligro de que se produzcan heridas
graves o incluso la muerte si no se siguen las precau-
ciones.
AVISO IMPORTANTE: En toda esta guía, las dimensiones
entre paréntesis son milímetros, a menos que se especi-
que lo contrario.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56

Wolf CI243CB Le manuel du propriétaire

Taper
Le manuel du propriétaire

dans d''autres langues