Samsung MX-HS8500 Manuel utilisateur

PREMIUM HI-FI Component System

user manual

MX-HS8500

imagine the possibilities

Thank you for purchasing this Samsung product.

To receive more complete service,

please register your product at

www.samsung.com/register

[MX-HS8500-ZC]AH68-02706B-03ENG.indd 1 2014-05-26 오후 6:12:56

Safety Information

• An administration fee may be charged if either

an engineer is called out at your request and there is no defect in the product

(i.e. where you have failed to read this user's manual).

you bring the unit to a repair centre and there is no defect in the product

(i.e. where you have failed to read this user's manual).

• The amount of such administration charge will be advised to you before any work or home visit is

carried out.

2 English

Warning

TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER (OR BACK).

NO USER-SERVICEABLE PARTS ARE INSIDE. REFER SERVICING TO QUALIFIED SERVICE

PERSONNEL.

CAUTION

RISK OF ELECTRIC SHOCK DO NOT OPEN

CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE

BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.

This symbol indicates “dangerous voltage”

inside the product that presents a risk of

electric shock or personal injury.

This symbol indicates important

instructions accompanying the product.

WARNING

• To reduce the risk of fire or electric shock, do

not expose this appliance to rain or moisture.

CLASS 1 LASER PRODUCT

This Compact Disc player is classified as a CLASS

1 LASER product. Use of controls, adjustments

or performance of procedures other than those

specified herein may result in hazardous radiation

exposure.

Complies with 21CFR 1040.10 except for

deviations pursuant to Laser Notice No. 50, dated

June 24, 2007.

DANGER :

• VISIBLE AND INVISIBLE LASER RADIATION

WHEN OPEN. AVOID DIRECT EXPOSURE TO

BEAM. (FDA 21 CFR)

CAUTION :

• CLASS 3B VISIBLE AND INVISIBLE LASER

RADIATION WHEN OPEN. AVOID EXPOSURE

TO THE BEAM. (IEC 60825-1)

• THIS PRODUCT UTILIZES A LASER.

USE OF CONTROLS OR ADJUSTMENTS

OR PERFORMANCE OF PROCEDURES

OTHER THAN THOSE SPECIFIED HEREIN

MAY RESULT IN HAZARDOUS RADIATION

EXPOSURE. DO NOT OPEN COVER AND DO

NOT REPAIR YOURSELF. REFER SERVICING

TO QUALIFIED PERSONNEL.

CLASS 1 LASER PRODUCT

KLASSE 1 LASER PRODUKT

LUOKAN 1 LASER LAITE

KLASS 1 LASER APPARAT

PRODUCTO LÁSER CLASE 1

[MX-HS8500-ZC]AH68-02706B-03ENG.indd 2 2014-05-26 오후 6:12:56

01 Safety Information

3 English

Important Safety Instructions

Read these operating instructions carefully before

using the unit. Follow all the safety instructions

listed below. Keep these operating instructions

handy for future reference.

1. Read these instructions.

2. Keep these Instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with dry cloth.

7. Do not block any ventilation openings. Install

in accordance with the manufacturer's

instructions.

8. Do not install near any heat sources such

as radiators, heat registers, stoves, or other

apparatus (including amplifiers) that produce

heat.

9. Do not defeat the safety purpose of the

polarized or groundingtype plug. A polarized

plug has two blades with one wider than the

other. A grounding type plug has two blades

and a third grounding prong. The wide blade

or the third prong are provided for your safety.

If the provided plug does not fit into your

outlet, consult an electrician for replacement

of the obsolete outlet.

10. Protect the power cord from being walked on

or pinched particularly at plugs, convenience

receptacles, and the point where they exit

from the apparatus.

11. Only use attachment/accessories specified

by the manufacturer.

12. Use only with the cart,

stand, tripod, bracket,

or table specified by the

manufacturer, or sold with

the apparatus.

When a cart is used, use

caution when moving the cart/apparatus

combination to avoid injury from tip-over.

13. Unplug this apparatus during lightning storms

or when unused for long periods of time.

14. Refer all servicing to qualified service

personnel. Servicing is required when the

apparatus has been damaged in any way,

such as when the power-supply cord or plug

is damaged, liquid has been spilled or objects

have fallen into the apparatus, the apparatus

has been exposed to rain or moisture, does

not operate normally, or has been dropped.

Precautions

• Ensure that the AC power supply in your house

complies with the identification sticker located

on the back of your product.

• Install your product horizontally, on a suitable

base (furniture), with enough space around it for

ventilation (3 - 4 inches/7.5 - 10 cm).

• Do not place the product on amplifiers or other

equipment which may become hot. Make sure

the ventilation slots are not covered.

• Do not stack anything on top of the product.

• Before moving the product, ensure the Disc

Insert Slot is empty.

• To turn off the product completely, disconnect

the AC plug from the wall outlet. Disconnect the

AC plug from the wall outlet if you will leave the

device unused for a long period of time.

• During thunderstorms, disconnect the AC plug

from the wall outlet. Voltage spikes due to

lightning could damage the product.

• Do not expose the product to direct sunlight

or other heat sources. This could cause the

product to overheat and malfunction.

• Protect the product from moisture, excess heat,

and equipment creating strong magnetic or

electric fields (i.e. speakers.).

• Disconnect the power cable from the AC supply

if the product malfunctions.

• Your product is not intended for industrial use. It

is for personal use only.

[MX-HS8500-ZC]AH68-02706B-03ENG.indd 3 2014-05-26 오후 6:12:57

Safety Information

4 English

• Condensation may occur if your product or

disc has been stored in cold temperatures. If

transporting the product during the winter, wait

approximately 2 hours until the product has

reached room temperature before using.

• The batteries used with this product contain

chemicals that are harmful to the environment.

Do not dispose of batteries in the general

household trash.

• Please check the volume level before playing

not to startle the elderly, infirm and pregnant

woman at a sudden loud sound.

• Place the loudspeakers at a reasonable distance

on either side of the system to ensure good

stereo sound.

• Direct the loudspeakers towards the listening

area.

• Do not expose this apparatus to dripping or

splashing. Do not place objects filled with

liquids, such as vases, on the apparatus.

• To turn this apparatus off completely, you must

disconnect it from the wall outlet. Consequently,

the wall outlet and power plug must be readily

accessible at all times.

• Use only a properly grounded plug and

receptacle.

- An improper ground may cause electric shock

or equipment damage. (Class l Equipment

only.)

Disc Storage & Management

• Holding Discs

- Fingerprints or scratches on

a disc may reduce sound and

picture quality or cause skipping.

- Avoid touching the surface of a disc where

data has been recorded.

- Hold the disc by the edges so that fingerprints

will not get on the surface.

- Do not stick paper or tape on the disc.

• Cleaning Discs

- If you get fingerprints or dirt on a

disc, clean it with a mild detergent

diluted in water and wipe with a

soft cloth.

- When cleaning, wipe gently from the inside to

the outside of the disc.

• Disc Storage

`

Do not keep in direct sunlight.

`

Keep in a cool ventilated area.

`

Keep in a clean protection jacket and store

vertically.

Disc and Format Compatibility

This product does not support Secure (DRM)

Media files.

CD-R Discs

• Some CD-R discs may not be playable

depending on the disc recording device (CD-

Recorder or PC) and the condition of the disc.

• Use 650MB/74 minute CD-R discs.

Do not use CD-R discs over 700MB/80 minutes

as they may not be played back.

• Some CD-RW (Rewritable) media may not be

playable.

• Only CD-Rs that are properly "closed" can be

fully played. If the session is closed, but the disc

is left open, you may not be able to fully play the

disc.

[MX-HS8500-ZC]AH68-02706B-03ENG.indd 4 2014-05-26 오후 6:12:59

01 Safety Information

5 English

MP3-CD Discs

• Only CD-R discs with MP3 files in ISO 9660 or

Joliet format can be played.

• MP3 file names should contain no blank spaces

or special characters (. / = +).

• Use discs recorded with a compression/

decompression data rate greater than 128Kbps.

• Only a consecutively written multisession disc

can be played. If there is a blank segment in the

Multisession disc, the disc can be played only

up to the blank segment.

• If the disc is not closed, it will take longer to

begin playback and not all of the recorded files

may play.

• For files encoded in the Variable Bit Rate (VBR)

format,( i.e. files encoded in both low bit rate

and high bit rate - 32Kbps ~ 320Kbps), the

sound may skip during playback.

• A maximum of 999 files can be played per CD.

Supported Audio Formats

File

Extension

Audio

Codec

Sampling

Rate

Bit Rate

*.mp3

MPEG 1 Layer3

16KHz ~

48KHz

80Kbps ~

320Kbps

MPEG 2 Layer3

16KHz ~

48KHz

80Kbps ~

320Kbps

MPEG 2.5 Layer3

16KHz ~

48KHz

80Kbps ~

320Kbps

*.wma

Wave_Format_

MSAudio1

16KHz ~

48KHz

56Kbps ~

128Kbps

Wave_Format_

MSAudio2

16KHz ~

48KHz

56Kbps ~

128Kbps

| NOTES |

✎

Does not support WMA Professional codec.

✎

The above table shows supported sampling

rates and bit rates. Files in formats that are not

supported will not play.

[MX-HS8500-ZC]AH68-02706B-03ENG.indd 5 2014-05-26 오후 6:12:59

Contents

6 English

SAFETY INFORMATION

2 Warning

3 Precautions

4 Disc Storage & Management

4 Disc and Format Compatibility

5 Supported Audio Formats

GETTING STARTED

8 Front Panel

9 Rear Panel

10 Remote Control

11 Accessories

11 Connecting the Speakers

11 Cautions on Moving the Speakers

12 Moving the Speaker Set

12 Moving the Right Speaker set

12 Moving the Left Speaker

FUNCTIONS

13 The Display function

13 Changing Display mode

13 The DEMO Music function

13 Playing a CD

13 Loading a Compact Disc

13 CD/MP3/CD-R Playback

14 Selecting a Track

14 Searching for a Specific Music Passage on

a CD

14 Repeat One or All Tracks on a CD

15 Playing USB Devices

15 USB Device Playback

15 To Select a File from a USB Device

16 To Use High Speed Search

16 To Delete a File

16 To Move to the Next/Previous Folder

16 To safely remove a USB device

16 Read Before Connecting USB Storage

Devices

17 Searching for a Track Quickly

17 Using the Program Function

17 Viewing or Editing Programmed Tracks

18 Bluetooth

18 What is Bluetooth?

18 To connect the Hi-Fi Component to a

Bluetooth device

19 To disconnect the Bluetooth device from

the Hi-Fi Component

19 To disconnect the Hi-Fi Component from

the Bluetooth device

19 Using Bluetooth Power On

20 TV SoundConnect

20 To connect the Hi-Fi Component to a

SoundConnect Compatible Samsung TV

20 To disconnect the TV from the Hi-Fi

Component

20 To disconnect the Hi-Fi Component from

the TV

20 Using My Karaoke

21 Auto Change Function

22 Listening to the Radio

22 To Store the Stations You Want

22 Selecting a Stored Station

[MX-HS8500-ZC]AH68-02706B-03ENG.indd 6 2014-05-26 오후 6:12:59

Contents

7 English

22 Timer Function

22 Setting the Clock

22 Setting the Timer

24 Cancelling the Timer

24 The Recording Function

24 Basic Recording

25 Recording Speed

26 Special Sound Effects

26 Selecting EQ Mode

26 FOOTBALL MODE function

26 GOAL Function

27 GIGA SOUND Function

27 BEAT WAVING Function

27 DJ BEAT Function

28 +PANNING Funcion

28 NON-STOP MUSIC RELAY Function

28 DANCE TIME Function

28 TEMPO Function

28 Booting Sound Function

APPENDIX

29 Troubleshooting

30 Specifications

[MX-HS8500-ZC]AH68-02706B-03ENG.indd 7 2014-05-26 오후 6:12:59

Getting Started

Front Panel

1

Display Panel

2

DANCE TIME button

3

TV SOUNDCONNECT button

4

CD/ Bluetooth button

5

STOP button

6

BACKWARD SEARCH/SKIP button

7

GIGA SOUND BEAT button

8

DISC slot

9

TUNER/AUX button

0

PLAY/PAUSE button

!

FORWARD SEARCH/SKIP button

@

Eject button for Disc

#

NON-STOP MUSIC RELAY button

$

VOLUME / DJ button

%

VOLUME/SEARCH JOG

^

POWER button

• Press this button to switch your product

on or off.

&

DISPLAY / DEMO button

*

DJ BEAT button

(

TEMPO button

)

SEARCH button

a

USB REC button

b

ENTER button

c

+PANNING button

d

EQ button

e

PROGRAM button

f

USB 2 jack for Playing and USB Recording

g

MIC jack

h

REMOTE CONTROL SENSOR

i

AUX IN 1 jack

Use to connect an external device such as

an MP3 player.

• Connect AUX IN 1 on the front panel

of the product to the Audio Out of an

external device/MP3 player.

• Press the TUNER/AUX button to select

AUX1.

j

USB 1 jack for only Playback

k

USB button

l

FOOTBALL MODE button

m

BEAT WAVING button

3 94

f

5

872

0

#

!6

$

^

l

m

%

&

*

k

(

)

hg b

i

dj

1

a

@

ce

8 English

[MX-HS8500-ZC]AH68-02706B-03ENG.indd 8 2014-05-26 오후 6:13:00

02 Getting Started

Rear Panel

1

Cooling fan

• The fan operates while the unit is

powered on.

If you set the unit to the minimum

volume, the fan won't operate.

Secure a minimum 6 inches (15 cm) of

clear space on from all sides of the fan

when installing the product.

2

POWER

• Insert only the provided power cable.

3

2.2 CH Speaker Terminals

1. To achieve the correct sound quality,

when you connect the speakers, match

the color of the speaker plugs to the

color of the speaker jacks. See below.

• LEFT channel (marked

, White/Purple).

• RIGHT channel (marked

, Red/Purple).

• Don't force the Purple SUBWOOFER

connector into the White or Red speaker

jack.

4

LED Terminals for Speaker Beat

Waving.

5

ONLY FOR SERVICE

• This jack is for testing only. Please do

not use.

6

AUX IN 2 Terminals

1. Use an Audio Cable (not supplied) to

connect AUX IN 2 on the product to

Audio Out on an external analog output

device.

• Be sure to match connector colors.

• If the external analog output device has

only one Audio Out jack, connect either

left or right.

• Press the TUNER/AUX button to select

AUX 2.

• If the product is in AUX mode for more

than eight hours and no buttons on the

front panel or remote are pushed, the

system will turn off.

7

FM Antenna Terminals

1. Connect the FM antenna to the FM

antenna connector terminal.

2.

Slowly move the antenna wire until you find

a location where reception is good, then

fasten it to a wall or other rigid surface.

3.

If reception is poor, you may need to

install an outdoor antenna. To do so,

connect an outdoor FM antenna to the

FM socket on the rear of the system

using a 75Ω coaxial cable (not supplied).

1

2 4 5 673

9 English

[MX-HS8500-ZC]AH68-02706B-03ENG.indd 9 2014-05-26 오후 6:13:01

Getting Started

Installing Batteries In The Remote Control

• Place batteries in the remote control so they

match the polarity of the illustrations in the

battery compartment. : (+) to (+) and (–) to (–).

• Do not dispose of batteries in a fire.

• Do not short circuit, disassemble, or overheat

the batteries.

• There is a danger of explosion if the battery is

replaced with the wrong battery type. Replace

only with the same or equivalent type.

• The remote control can be used up to

approximately 23 feet (7 meters) in a straight

line from the system.

Remote Control

Power

Bluetooth

TUNING MODE

PLAY/PAUSE

TIMER SET

MY KARAOKE

CD

USB

TUNER/AUX

NON-STOP MUSIC RELAY

TEMPO

STOP

FOOTBALL

EQ

PROGRAM

TIMER ON/OFF

DISPLAY

MIC VOLUME –, +

AUTO CHANGE

BEAT WAVING

TV SoundConnect

REC SPEED

MO/ST

DJ BEAT

EFFECT LEVEL

REPEAT

GOAL

DANCE TIME

DELETE

SLEEP (Set a sleep time to shut off the

product.)

TUNING/ALBUM

,

.

SEARCH

USB REC

+PANNING

GIGA SOUND BEAT

MUTE (Turn off the sound temporarily. Press

again to turn the sound back on.)

SKIP

VOLUME (–, +)

10 English

[MX-HS8500-ZC]AH68-02706B-03ENG.indd 10 2014-05-26 오후 6:13:01

02 Getting Started

Accessories

Check for the supplied accessories below.

User Manual Remote Control/Batteries

FM Antenna Power Cable

• Figures and illustrations in this user's manual are provided for reference only and may differ from actual

product appearance.

Connecting the Speakers

Recommended speaker setup.

| IMPORTANT |

✎

The product may not operate properly if it is

subject to shaking or external shocks or if the

speakers are not installed as recommended.

✎

Do not stretch the speaker wires or place a

heavy object on them.

Cautions on Moving the Speakers

• When moving the main unit and speakers, make

sure to separate all connected speaker cables

before.

• When separating the SPEAKERS LIGHTING

cables, press the lock to release the connector

as shown below.

11 English

[MX-HS8500-ZC]AH68-02706B-03ENG.indd 11 2014-05-26 오후 6:13:03

Getting Started

Moving the Speaker Set

You can move and install the speaker set to the desired location.

Moving the Right Speaker set

1. To unlock the bottom wheel, pull up the lock

latch in the arrow direction.

• To lock the wheel, pull down the latch.

2. Hold the speaker set by its top handles on the

both sides.

3. Lean the Speaker towards you appropriately,

and move it.

| CAUTION |

✎

When leaning the speaker, stand clear to avoid crushing onto your feet

with the speaker's bottom front end.

✎

Before using the speakers, make sure to install it on an even surface and

lock its wheels.

Moving the Left Speaker

1. To unlock the bottom wheel, pull up the lock

latch in the arrow direction.

• To lock the wheel, pull down the latch.

2. Hold the speaker by its handles on the both

sides.

3. Lean the Speaker towards you appropriately,

and move it.

| CAUTION |

✎

When leaning the speaker, stand clear to avoid crushing onto your feet

with the speaker's bottom front end.

✎

Before using the speakers, make sure to install it on an even surface and

lock its wheels.

12 English

< Locked > < Unlocked >



< Locked > < Unlocked >



[MX-HS8500-ZC]AH68-02706B-03ENG.indd 12 2014-05-26 오후 6:13:04

03 Functions

Functions

The Display function

You can view functions available on the

display, adjust the brightness of the display

and set the Display/LED either on or off.

Changing Display mode

Press the DISPLAY/DEMO button on the product.

Each time you press this button, the mode will

change as follows:

• The Dimmer function

The Dimmer function is selected and the display

darkens.

• LED OFF

The Front display LED is turned off while the

dimmer function is working.

• Clock ON

The Clock you set is displayed.

• Display/LED ON

All displays and the LED are turned on.

The DEMO Music function

Press DISPLAY/DEMO button on the product

or DISPLAY button on the remote control for 5

seconds to start the Demo mode.

Each time you press this button, the mode will

change as follows:

DIMMER

;

LED Off (unit/speaker)

;

--:-- [time

display]

;

LED On (unit/speaker)

To cancel the Demo Music mode

• Press the DISPLAY/DEMO button on the

product or DISPLAY button on the remote

control for 5 seconds again.

The DEMO mode is cancelled and the product

turns off.

• Press TUNER/AUX, CD/Bluetooth, or USB

button on the product.

The DEMO mode is cancelled and the mode is

changed to the mode you selected.

| NOTES |

✎

When the DEMO music function is on, only the

POWER (

), VOL, MUTE ( ) buttons and

the buttons mentioned above work.

✎

The DEMO sampler plays for 3 minutes; only

the message remains displayed on the front

panel after its playback.

Playing a CD

Loading a Compact Disc

You can play standard compact discs that

require no adapter.

1. Insert a disc gently into the disc slot with the

disc's label facing up. The disc will be played

automatically.

• You can load or unload compact discs

when the radio, USB, or auxiliary source

function is selected. When you press the

8

button, all the other functions will

change to the CD mode.

• If no buttons are pressed on the product

or remote control for more than 3 minutes

when the product is in Pause mode, it will

change to Stop mode.

• If no buttons are pressed on the product

or remote control for more than 25 minutes

when the product is in Stop mode, the

product will turn off.

CD/MP3/CD-R Playback

| IMPORTANT |

✎

This product is designed to play the following

audio disc types: CD, CD-R, CD-RW.

1. Insert a disc gently into the disc slot with the

disc's label facing up.

2. The disc is played automatically.

• For MP3/WMA files, it may take several

minutes for the product to finish scanning

the disc tracks.

• If you play a file with an English title, the

song title will be shown in the display. (Titles

in other languages can not be displayed.)

• An English-titled track containing a

special character (@, $, *, etc.) will not be

displayed.

Track Indicator

Playtime

Indicator

13 English

[MX-HS8500-ZC]AH68-02706B-03ENG.indd 13 2014-05-26 오후 6:13:05

Functions

3. To adjust the volume:

• Turn the VOLUME control on the product.

• Press the VOL+ or VOL- button on the

remote control.

The volume level can be adjusted in 31

steps (VOLUME MIN, VOLUME 01 ~

VOLUME 29, and VOLUME MAX).

4. PAUSING PLAYBACK

Main Unit

To pause playback temporarily, press the

button.

Press again to continue playing the disc.

Remote control

To pause playback temporarily, press the

button.

Press the button to continue playing the

disc.

5. To end playing, press the

5

button.

| NOTES |

✎

If no CD is in the disc slot, “NO DISC” appears

on the display.

✎

The quality of MP3/CD-R playback may vary

depending on the condition of the disc or the

condition of the recorder used to create the

disc.

✎

If a disc contains different types of files or

unnecessary folders, you will have problems

with playback.

✎

Gently insert a CD into the disc slot. Do not

apply excessive force.

- Do not apply force to the product or place a

heavy object on the product.

- Do not insert an out-of-spec or oddly

shaped CD (heart shaped, octangular, etc.).

You can damage the product.

- Carefully maintain your CDs.

Selecting a Track

You can select a desired track while the disc is

being played.

To play the previous track

Press the

1

button within 3 seconds after the

current track has started playing.

Press the

1

button twice, 3 seconds or more

after the current track starts playing.

To play the next track

Press the

2

button.

To play the current track from the

beginning

Press the

1

button, 3 seconds after the current

track started playing.

To play the track of your choice

Press the

1

or

2

button to move to a desired

track.

Searching for a Specific Music Passage

on a CD

When listening to a CD, you can quickly search for

a specific music passage on a track.

Forward Search ....................

3

Backward Search .................

4

You can also press and hold the

1

,

2

buttons

on the product to automatically scan for a track.

Repeat One or All Tracks on a CD

You can play a CD or tracks on a CD repeatedly.

1. Press the REPEAT button on the remote

control.

Each time you press this button, the mode

changes as follows:

MP3 : OFF

;

TRACK

;

DIR

;

ALL

;

RANDOM

CD : OFF

;

TRACK

;

ALL

;

RANDOM

14 English

[MX-HS8500-ZC]AH68-02706B-03ENG.indd 14 2014-05-26 오후 6:13:05

03 Functions

2. When you want to stop the repeat function,

press the REPEAT button until "OFF" is

displayed.

• OFF : Cancels repeat playback.

• TRACK : Repeatedly plays the selected

track.

• DIR (DIRECTORY) : Repeatedly plays all

tracks in the selected folder.

• ALL : Repeatedly plays the entire disc.

• RANDOM : Plays tracks in random order.

Playing USB Devices

Connect an external storage device such as a

USB flash memory or external HDD (Hard Disk

Drive) to the product. You can play files in MP3/

WMA format.

USB Device Playback

1. Connect the external USB storage device to

your product.

2. Select the USB mode by pressing the USB

button on the product or the USB button on

the remote control.

3. The first file of the first directory plays

automatically.

4. To stop playing

Press the

5

button to stop playing.

| NOTES |

✎

To remove the USB device

- If you press the

5

button again, you can

remove the USB device safely.

| IMPORTANT |

✎

Do not connect a USB recharger to the USB

port of this product. You can damage the

product.

To Select a File from a USB Device

You can select an MP3 file while the product is

playing.

| NOTES |

✎

If you want to move to the previous/next track,

press the

1

,

2

buttons briefly.

- The unit moves to the previous/next track

within the directory.

- If you press the

1

,

2

buttons more times

than the number of the files in the directory,

the unit moves to the next directory.

To repeat

1. Press the REPEAT button.

Each time you press this button, the mode

changes as follows:

OFF

;

TRACK

;

DIR

;

ALL

;

RANDOM

2. When you want to stop the repeat function,

press the REPEAT button until "OFF" is

displayed.

• OFF : Cancels repeat playback.

• TRACK : Repeatedly plays the selected

file.

• DIR (DIRECTORY) : Repeatedly plays all

files in the selected folder.

• ALL : Repeatedly plays all files.

• RANDOM : Plays files in random order.

| NOTES |

✎

If the file selected to be played is located in a

folder, all the files within that folder are played

in random order. If the file selected is located in

the root folder, all files will be played in random

order.

15 English

[MX-HS8500-ZC]AH68-02706B-03ENG.indd 15 2014-05-26 오후 6:13:05

Functions

To Use High Speed Search

You can search a desired section quickly while the

product is playing.

Press the

3

,

4

button.

• Each time you press the button, you move

through the section forward/backward quickly.

| IMPORTANT |

✎

The product does not output sound during a

high speed search.

✎

You can also press and hold the

1

or

2

button on the main unit to automatically scan

for a track.

To Delete a File

You can delete a ﬁle from your USB device.

1. Select a file you want to delete.

2. Press the DELETE button on the remote

control. "DELETE NO" is displayed.

3. Press the DELETE button on the remote

control and “DELETE YES” is displayed.

4. Press the

¬

button. “DELETE END”

appears and deletion is completed.

To Move to the Next/Previous Folder

Press the TUNING/ALBUM

,

/

.

button on the

remote control to move to the previous/next folder.

| NOTES |

✎

When sound files are stored in the root

directory rather than in a folder, press the

TUNING/ALBUM

,

/

.

button to go to the

first TRACK.

To safely remove a USB device

1. Press the

5

button twice while the USB is

playing or press the

5

button once when

play has stopped.

2. When the REMOVE message appears on the

display, remove the USB device.

Read Before Connecting USB Storage

Devices

• Some USB devices may not work properly with

this product.

• This product only supports external HDD`s that

are formatted in the FAT file system.

• USB 2.0 HDDs should be connected to a

separate power source. Otherwise, the USB 2.0

HDDs will not work.

• If multiple USB external storage are connected

together, only the MP3 files in the first HDD will

be played.

• Files with Digital Rights Management (DRM)

are not supported. DRM restricts unauthorized

access to a DRM file so that file is protected

from piracy.

• Even if a file has an .mp3 extension, the file

cannot be played if it is formatted in MPEG layer

1 or 2.

• Do not use an unrecognized USB hub.

• Only the first 15 characters of an audio file name

are shown on the product's display.

• Only removable HDDs with less than 160GB are

supported. Depending on the device, a 160GB-

or more removable HDD may not be supported.

• It can take several minutes for the product to

recognize the files on some USB devices.

• Some USB devices (USB HDDs, in particular)

may cause a delay when moving from track to

track.

• With USB storage devices supporting USB

VER1.1 only, the product may access files

slowly or may not recognize the file properties.

• The maximum electrical current provided by

each USB port to connected USB devices is

0.5A (based on DC 5V).

• If there is no USB connection or STOP mode

lasts for more than 25 minutes, the product will

automatically turn off.

• Some USB devices, digital cameras, USB card

readers, iPods, iPhones, and Smart Phones

may not be supported.

16 English

[MX-HS8500-ZC]AH68-02706B-03ENG.indd 16 2014-05-26 오후 6:13:05

03 Functions

Searching for a Track Quickly

You can select a track directly without the

1

,

2

button.

CDDA/MP3-CD/USB

1. Press the SEARCH button.

After pressing the SEARCH button, turn

the VOLUME/SEARCH JOG control on the

product to the left or right to select a desired

track.

• You can move to the selected track directly.

2. When searching is done, the track will

automatically start playing.

Using the Program Function

This function is not available during playback of an

MP3-CD/USB.

• You can program the playback order of up to 99

tracks of your choice.

• However, you must stop playing the CD/USB

before selecting tracks.

1. While in CD/USB playback mode, press the

5

button to stop playing the CD/USB.

2. Press the PROGRAM button to display the

message below:

PROG 01 TRACK---

(01= program number, ---= track number)

3. Use the

1

or

2

button or the VOLUME/

SEARCH JOG to move to a desired track.

• Press

1

to move to the previous track.

• Press

2

to move to the next track.

4. Press the

¬

button to confirm your

selection. The selection is stored and

is displayed.

5. To select another track, follow Steps 3 and 4

above.

6. Press the

button to play the programmed

tracks.

7. Press the

5

button to stop playing the

programmed tracks, Press the

5

button

again to cancel playing the programmed

tracks.

• If you eject the disc, CD programming is

cancelled.

If you turn off the product, CD/USB

programming is cancelled.

| NOTES |

✎

CD/USB program play will continue if you try to

switch to another mode.

✎

USB REC, DELETE and TUNING/ALBUM

buttons will not work in Program mode. If

you press such buttons in Program mode,

“PROGRAM PLAY” will be displayed instead.

✎

If a file in the program to be played was not in

a supported format, playback skips to the next

file automatically.

Viewing or Editing Programmed Tracks

You can view and edit a list of programmed tracks.

1. If a programmed track is being played, press

the

5

button once.

2. Press the PROGRAM button twice to display

the message below:

SAVED 01 TRACK002

(01= program number, 002= track number)

3. Repeatedly press the

¬

button until the

desired track is displayed.

4. Press the

1

or

2

button to select a

different track.

5. Press the

¬

button to confirm your

selection.

6. To play the programmed tracks, press the

button.

To repeat

1. Press the REPEAT button.

Each time you press this button, the mode

changes as follows:

OFF

;

TRACK

;

ALL

17 English

[MX-HS8500-ZC]AH68-02706B-03ENG.indd 17 2014-05-26 오후 6:13:05

Functions

Bluetooth

You can use a Bluetooth device to enjoy music

with high quality stereo sound, all without wires!

What is Bluetooth?

Bluetooth is a technology that enables Bluetooth

compliant devices to interconnect easily with each

other using a short, wireless connection.

• A Bluetooth device may cause noise or

malfunction, depending on usage, when:

- A part of your body is in contact with the

receiving/transmitting system of the Bluetooth

device or the Hi-Fi Component.

- It is subject to electrical variation from

obstructions caused by a wall, corner, or

office partitioning.

- It is exposed to electrical interference from

same frequency-band devices including

medical equipment, microwave ovens, and

wireless LANs.

• Pair the Hi-Fi Component with the Bluetooth

device while they are close together.

• The greater the distance between the Hi-

Fi Component and the Bluetooth device, the

worse the quality. If the distance exceeds the

Bluetooth operational range, the connection is

lost.

• In poor reception areas, the Bluetooth

connection may not work properly.

• The Bluetooth connection only works when

the Bluetooth device and the Hi-Fi Component

are close together. The connection will be

automatically cut off if the Bluetooth device

is out of range. Even within range, the sound

quality may be degraded by obstacles such as

walls or doors.

• This wireless device may cause electric

interference during its operation.

To connect the Hi-Fi Component to a

Bluetooth device

Before you begin, confirm that your Bluetooth

device supports the Bluetooth-compliant stereo

headset function.

1. Press the CD/Bluetooth button of the Hi-

Fi Component to display the BLUETOOTH

message.

• You will see WAIT for a short period of time

and then READY on the front display of the

Hi-Fi Component.

2. Select the Bluetooth menu on the Bluetooth

device you want to connect. (Refer to the

Bluetooth device's user manual.)

3. Select the Stereo headset menu on the

Bluetooth device.

• You will see a list of scanned devices.

4. Select "[Samsung] HI-FI XXXXXX" from the

list.

• When the product is connected to

the Bluetooth device, it will display

CONNECTED

;

BLUETOOTH on the

front display.

• If the Bluetooth device has failed to pair

with the product, delete the previous

“[Samsung] HI-FI XXXXXX” found by the

Bluetooth device and have it search for the

product again.

5. You can listen to the music playing on the

connected Bluetooth device over the Hi-Fi

Component system.

• In Bluetooth mode, some model's Play/

Stop/Next/Back functions are not available.

| NOTES |

The product only supports Middle Quality

SBC data (up to 237kbps@48kHz), and

does not support High Quality SBC data

([email protected]).

✎

The AVRCP feature is not supported.

✎

Connect only to a Bluetooth device that

supports the A2DP (AV) function.

✎

You cannot connect to a Bluetooth device that

supports only the HF (Hands Free) function.

18 English

[MX-HS8500-ZC]AH68-02706B-03ENG.indd 18 2014-05-26 오후 6:13:05

03 Functions

✎

Only one Bluetooth device can be paired at a

time.

✎

Once you have turned off the Hi-Fi Component

and the pairing is disconnected, the pairing will

not be restored automatically. To reconnect,

you must pair the device again.

✎

The Hi-Fi Component system may not search

or connect properly in the following cases:

- If there is a strong electrical field around the

Hi-Fi Component.

- If several Bluetooth devices are

simultaneously paired with Hi-Fi Component.

- If the Bluetooth device is turned off, not in

place, or malfunctions.

- Note that such devices as microwave ovens,

wireless LAN adaptors, fluorescent lights,

and gas stoves use the same frequency

range as the Bluetooth device, which can

cause electric interference.

To disconnect the Bluetooth device

from the Hi-Fi Component

You can disconnect the Bluetooth device from

the Hi-Fi Component. For instructions, see the

Bluetooth device's user manual.

• The Hi-Fi Component will be disconnected.

• When the Hi-Fi Component is disconnected

from the Bluetooth device, the Hi-Fi Component

displays DISCONNECTED

;

READY on its

display.

To disconnect the Hi-Fi Component

from the Bluetooth device

Press another mode button on the front panel of

the Hi-Fi Component to switch from Bluetooth

mode to another mode or turn off the Hi-Fi

Component. The currently connected device is

disconnected.

| NOTES |

✎

The connected Bluetooth device will wait a

certain amount of time for a response from

the Hi-Fi Component before terminating the

connection.(Disconnection time may differ,

depending on the Bluetooth device)

✎

In Bluetooth connection mode, the Bluetooth

connection will be lost if the distance between

the Hi-Fi Component and the Bluetooth device

exceeds 16.25 feet (5 meters).

✎

If the Bluetooth device comes back into the

effective range after disconnecting, you can

restart the Hi-Fi Component to restore the

pairing with the Bluetooth device.

✎

The Hi-Fi Component automatically turns off

after 25 minutes in the Ready mode.

✎

When a Bluetooth device is connected to the

Hi-Fi Component system, the Hi-Fi Component

System automatically switches to the Bluetooth

mode if it is in a different mode.

Using Bluetooth Power On

When the product is turned off, you can connect

your smart device to the product via a Bluetooth

connection to turn it on.

1. Press and hold the Bluetooth button on

the remote to set the Bluetooth Power On

function On. Bluetooth Power On appears on

the display.

2. When the product is off, connect your smart

device to the product via Bluetooth. (For

information on Bluetooth connections, refer

to your smart device’s manual.)

3. When the connection is complete, the

product turns itself on automatically in

Bluetooth mode.

• Select the desired music to play from your

smart device.

| NOTES |

✎

Press and hold the Bluetooth button on the

remote control to turn the Bluetooth Power On

function on or off.

Each time you press and hold this button, the

Hi-Fi Component displays Bluetooth Power

On

;

Off on its display.

19 English

[MX-HS8500-ZC]AH68-02706B-03ENG.indd 19 2014-05-26 오후 6:13:06

Functions

TV SoundConnect

You can listen to the sound from your

SoundConnect Compatible Samsung TV

through the Hi-Fi Component by using the TV

SoundConnect function.

To connect the Hi-Fi Component to a

SoundConnect Compatible Samsung

TV

Before activating this function, be sure to set the

Samsung TV's SoundConnect or SoundShare

function to On.

1. Press the TV SoundConnect button of

the Hi-Fi Component to display the TV

SOUNDCONNECT message.

WAIT

;

SEARCH

;

REQUEST

2. Set Add New Device to On in the TV's

SoundConnect Settings menu. (Refer to the

TV's user manual for details.)

3. When the Hi-Fi Component is connected

to the TV, it will display [TV] Name

;

CONNECTED on the front display.

4. The audio from the connected TV plays over

the Hi-Fi Component system.

| NOTES |

✎

The SoundConnect feature is available on some

Samsung TVs released since 2012. Check

whether your TV supports the SoundShare or

SoundConnect function.

(For further details, refer to the TV's user's

manual.)

✎

If you unplug the Hi-Fi Component, the TV

SoundConnect connection is terminated. To

re-establish the connection, plug the Hi-Fi

Component into an outlet, and then set the TV

SoundConnect connection again.

✎

Only one Hi-Fi Component can be connected

to a TV via TV SoundConnect at at time.

✎

To connect to another TV in TV SoundConnect

mode, press the

button for more than 5

seconds, and then connect to the other TV by

following the directions above.

To disconnect the TV from the Hi-Fi

Component

You can disconnect the TV from the Hi- Fi

Component.

For instructions, see the TV's user manual.

• When the Hi-Fi Component is disconnected

from the TV, the Hi-Fi Component displays

DISCONNECTED

;

REQUEST on its display.

To disconnect the Hi-Fi Component

from the TV

Press another mode button on the front panel

of the Hi-Fi Component to switch from TV

SoundConnect mode to another mode or turn off

the Hi-Fi Component. The currently connected

device is disconnected.

| NOTES |

✎

The connected TV will wait a certain amount

of time for a response from the Hi-Fi

Component before terminating the connection.

(Disconnection time may differ, depending on

the TV)

✎

The connection may be lost or sound may

stutter if the distance between the TV and the

Hi-Fi Component exceeds 6.5 feet (2 m).

✎

Instability in the network environment may

cause the connection to be lost or sound to

stutter.

✎

The Hi-Fi Component automatically turns off

after 25 minutes if it is not connected to a TV.

Using My Karaoke

You can use the MY Karaoke function to sing

along with your favorite CDs and USB tracks.

1. Connect the microphone to the MIC jack on

the front of the product.

• If your microphone plug is smaller than the

6.3 mm MIC jack, you need a Connector-

Adaptor (not supplied) to complete the

connection.

- First, connect the Connector-Adaptor to

the MIC jack on the front of the product,

- Second, connect the microphone (with

larger jack) to the Connector-Adaptor.

20 English

[MX-HS8500-ZC]AH68-02706B-03ENG.indd 20 2014-05-26 오후 6:13:06

La page est en cours de chargement...

Samsung MX-HS8500 Manuel utilisateur

Samsung MX-HS8500 Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents