ViewSonic GSS-WL850FJB Manuel utilisateur

Wireless LAN WL-850FJB 802.11g

User's Manual

Version 1.0

User’s Guide

1

Copyright statement

No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form

or by any means, whether electronic, mechanical, photocopying, recording, or otherwise without the

prior writing of the publisher.

April 2004

User’s Guide

2

Contents

1. Introduction____________________________________________________ 3

2. Wireless LAN WL-850FJB Basics ___________________________________ 4

3. Installation for Windows platform ___________________________________ 5

3.1. Installation Overview____________________________________________ 6

3.2. Install Procedure for Windows XP __________________________________ 7

3.3. Install Procedure for Windows 98/ME/2000 ___________________________ 9

4. Configuration Utility ____________________________________________ 17

4.1 Link Information________________________________ !

5. Certification _______________________________________________________20

User’s Guide

3

1. Introduction

Thank you for purchasing your Wireless LAN WL-850FJB 802.11g Adapter. This Quick Installation

Guide will assist you with the installation procedure.

The package you have received should contain the following items:

• Wireless LAN WL-850FJB 802.11g Adapter

• Quick Installation Guide

• CD containing Wireless LAN WL-850FJB Management utility, drivers and Multi-lingual User’s

Guide

Note: if anything is missing, please contact your vendor

The CD contains drivers and Configuration Utility program that is used for managing the Wireless LAN

WL-850FJB Adapters and establishing the wireless connection with your Local Area Network.

Note: This manual is valid for all Wireless LAN WL-850FJB 11g Series products, such as PC Card,

USB, mini-USB, PCI adapter, mini-PCI… etc.

User’s Guide

4

2. Wireless LAN WL-850FJB Basics

Wireless LAN WL-850FJB (Local Area Networks) systems offer a great number of advantages over a

traditional, wired system. Wireless LAN WL-850FJBs (WLAN WL-850FJBs) are more flexible, easier to

setup and manage and often more cost effective than their wired equivalence.

Using radio frequency (RF) technology, WLAN WL-850FJBs transmit and receive data over the air,

minimizing the need for wired connections. Thus, WLAN WL-850FJBs combine data connectivity with

user mobility, and, through simplified configuration, enable movable LAN WL-850FJBs.

With wireless LAN WL-850FJBs, users can access shared information without looking for a place to

plug in and network managers can set up or augment networks without installing or moving wires.

Wireless LAN WL-850FJBs offer the following productivity, convenience and cost advantages over

traditional wired networks:

• Mobility - Wireless LAN WL-850FJB systems can provide LAN WL-850FJB users with access to

real-time information anywhere in their organization. This mobility supports productivity and

service opportunities not possible with wired networks.

• Installation Speed and Simplicity - Installing a wireless LAN WL-850FJB system can be fast and

easy and can eliminate the need to pull cable through walls and ceilings.

• Installation Flexibility - Wireless technology allows the network to go where wires cannot go.

• Reduced Cost-of-Ownership - While the initial investment required for wireless LAN WL-850FJB

hardware might be higher than the cost of wired LAN WL-850FJB hardware, overall installation

expenses and life-cycle costs will be significantly lower. Long-term cost benefits are greatest in

dynamic environments requiring frequent moves, adds, and changes.

• Scalability - Wireless LAN WL-850FJB systems can be configured in a variety of topologies to

meet the needs of specific applications and installations. Configurations are easily changed and

range from peer-to-peer to full infrastructure networks, also allow roaming over a broad area.

User’s Guide

5

3. Installation for Windows platform

The following section will assist you in installing wireless LAN WL-850FJB Adapter successfully. You

will first install software (Utility) and then insert / attach the Wireless LAN WL-850FJB Adapter to your

system, and finally set the network properties to accommodate resource sharing and select the type of

wireless network that you wish to install. The Wireless LAN WL-850FJB card can easily be installed

and used, without bothering to connect cables for keeping your computer to use network resources.

User’s Guide

6

3.1. Installation Overview

Here are some steps you will perform in establishing your wireless network connection:

l Install the Access Point at first. AP is needed in case of Infrastructure network mode.

l Install the software using the Install CD.

l Install the Wireless LAN WL-850FJB Card (WIRELESS LAN WL-850FJB 802.11g Adapter).

l Install the network protocol(s) required to communicate on your network. Most likely you will need

the TCP/IP protocol.

User’s Guide

7

3.2. Install Procedure for Windows XP

1. Insert the given Installation CD in the CD-ROM and then click on the Install Config Utilities.

Follow the instruction to finish the installation.

Insert your WLAN WL-850FJB card into PCMCIA/PCI slot or USB connector of your system, and then

system will detect new hardware.

Select “Install the software automatically (Recommended) ”, and then click Next to continue.

Not

e: Do not insert the

WLAN WL

-

850FJB Adapter

until you are asked to do so, failure of which may result in

unsuccessful installation of your WLAN WL-850FJB device.

Important Notice

In order to make right use of WPA, please ensure that your current Wireless Adapter’

s driver, and

Wireless Utility can support it, WPA needs 802.1x authentication (when

RADIUS mode is chosen),

though the Operating System must also support 802.1x protocol. For Microsoft’

s OS family, only

Windows XP has incorporated this by default. The rest of the OS must installed 3er party’

s client

software such as Funk ODySSey.

User’s Guide

8

Once your system detected the driver, Microsoft will show a warning message as below.

Click “ Continue Anyway ” for next step.

After copy the file to your system, then the setup is finish.

User’s Guide

9

3.3. Install Procedure for Windows 98/ME/2000

Please follow the following steps one by one in order to install the WLAN WL-850FJB

Adapter successfully.

1. Power on your computer and allow Windows 98/ME/2000 to load fully.

2. Be sure that the Wireless LAN WL-850FJB 802.11g Adapter is not inserted yet.

3. Insert the given Installation CD in the CD-ROM and then click on the Install Config Utilities.

At the “ Welcome” window, click Next.

Note: Do not insert the

WLAN WL

-

850FJB Adapter

until you are asked to do so, failure of which may result in

unsuccessful installation of your WLAN WL-850FJB device.

User’s Guide

10

4. Accept the license agreement.

Accept the license agreement. Click Yes to accept.

Click Yes to finish the setup.

User’s Guide

11

5. Insert / attach Wireless LAN WL-850FJB 802.11g Adapter to your system

Windows will recognize the WLAN WL-850FJB adapter and auto detect the driver, if the system did

not find the driver automatically, please install the driver manually.

Click Yes to finish the installation.

User’s Guide

12

6.

Click the right button of mouse on My Computer à Properties à HardwareàDevice Manager.

Check whether it has WLAN WL-850FJB adapter in one of the sockets or not. If you find Wireless

Network PC Card in one of the sockets, it means the card is detected properly.

7.

Click right button of mouse on the Network Neighborhood.

User’s Guide

13

8.

Select Properties from the pop up menu. For Windows 98 the network’s properties box appears.

* For Windows ME and 2000, please select the Local Area Connection’s properties to check the

following menu.

9.

Click on the General tab and then click on the Install button. Select Network Component Type box

appears. Click on the Protocol then click the Add button.

User’s Guide

14

10.

Select Network Protocols box appears. From the list of network protocols list, select NetBEUI, then

click OK.

11.

The NetBEUI protocol is now installed. After clicking on OK return back to Network Component Type

box.

12.

Repeat the step 9 and 10 to add IPX/SPX protocol.

User’s Guide

15

13.

Click on the TCP/IP option for setting the IP address for your computer. You can select either Obtain

an IP address automatically or Use the following IP address setting. If your choice is the second

one then enter the IP value, Subnet masking, DNS, Domain/ Workgroup name, and Gateway

Address values. After setting these parameters appropriately, click OK to return to Network

Component Type and you can select the File and Printer Sharing options as well for sharing your

computers resources. Click on OK.

14.

Screen message do want to restart your Computer will pop up. Select Yes. It will shut down your

computer and restart.

Important

:

In order to make sure that the changed va

lues could take effect, please

Restart

your computer before continue.

User’s Guide

16

Uninstall Procedure

Step 1:

If you want to uninstall the WLAN WL-850FJB adapter, just simply click

Start Menu à Program à Wireless Network à Uninstall,

it shall uninstall all related programs.

Step 2:

Restart your Computer.

User’s Guide

17

4. Configuration Utility

Wireless LAN WL-850FJB 802.11g Wireless LAN WL-850FJB adapter uses its own management

software. All functions controlled by user are provided by this application. Usually this application starts

automatically,

or click icon from Start Menu to start the Utility application.

A new icon - should appear in your Icon tray. If the icon is in red, it means that Wireless LAN WL-

850FJB 802.11g NIC configuration is invalid or incomplete. Sometimes icon can be colored in yellow.

This may happen when communication is defined poor connection or incorrectly.

Figure 1 Icon tray with a new icon

User’s Guide

18

4. 1 Link Information

This field is used to display the current status of connection. When the state shows “Connected to

Network“ means normal flow of operation in Infrastructure mode. The PC is connected to access

point. Networking is available.

A state of “Scanning” means that the node is searching for available access point and detecting

the SSID for an available access point within range.

This field will also display an error message for some reason if the driver fails to initialize.

Network Type

Infrastructure Mode - The driver will scan all available channels continuously until it finds one or

more Access Points that match its SSID. At that point it will try and authenticate and

associate with the Access Point.

Peer to Peer Mode - The driver will scan for 5 seconds looking for an existing Ad Hoc network

using the same SSID.

- Current Channel and Transmit Rate

Shows the channel of the ra

dio and transmit rate being currently used for an active connection.

This value has no meaning when the radio is “Scanning”

- Link Quality

The Link Quality bar graph is only active when the node is in Infrastructure Mode. The bar graph

displays the quality of the link between the node and Access Point.

- Signal Strength

The Signal Strength bar graph is only active when the node is in Infrastructure Mode. The bar

graph displays normalized signal strength as reported by the radio, averaged over all frames over

100 bytes long that are received from the Access Point.

User’s Guide

19

5. Certification

IC Statement

The device is certified to the requirements of RSS-210 for 2.4 GHz spread spectrum devices. To

prevent radio interference to the licensed service, this device is intended to be operated indoors and

away from windows to provide maximum shielding.

Operation is subject to the following two conditions:

1) This device may not cause interference and

2) This device must accept any interference, including interference that may cause undesired operation

of the device

Federal Communication Commission Interference Statement

This equipment has been tested and found to comply with the limits for a Class B digital device,

pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection

against harmful interference in a residential installation. This equipment generates, uses and can

radiate radio frequency energy and, if not installed and used in accordance with the instructions, may

cause harmful interference to radio communications. However, there is no guarantee that interference

will not occur in a particular installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment off and on, the user is

encouraged to try to correct the interference by one of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help.

This device complies with Par

t 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and (2) this device must accept any interference

received, including interference that may cause undesired operation.

FCC Caution: Any changes or modifications not expressly approved by the party responsible for

compliance could void the user's authority to operate this equipment.

IMPORTANT NOTE:

FCC Radiation Exposure Statement:

This equipment complies with

FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and

operated with minimum distance 20cm between the radiator & your body.

This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

This device is intended only for OEM integrators under the following conditions:

1) The antenna must be installed such that 20 cm is maintained between the antenna and users, and

2) The transmitter module may not be co-located with any other transmitter or antenna.

As long as 2 conditions above are met, further transmitter test will not be required. However, the OEM integrator

is still responsible for testing their end-product for any additional compliance requirements required with this

module installed (for example, digital device emissions, PC peripheral requirements, etc.).

IMPORTANT NOTE: In the event that these conditions can not be met (for example certain laptop configurations

or co-location with another transmitter), then the FCC authorization is no longer considered valid and the FCC ID

can not be used on the final product. In these circumstances, the OEM integrator will be responsible for re-

evaluating the end product (including the transmitter) and obtaining a separate FCC authorization.

ViewSonic declares that WL-850FJB ( FCC ID: GSS-WL850FJB ) is limited in CH1~CH11 for 2.4 GHz by

specified firmware controlled in U.S.A.

La page charge ...

ViewSonic GSS-WL850FJB Manuel utilisateur

Ce manuel convient également à

ViewSonic GSS-WL850FJB Manuel utilisateur

dans d''autres langues

Autres documents