Panasonic PVDF2702K Mode d'emploi

Please read these instructions carefully before attempting to connect,

operate, or adjust this product. Please save this manual.

LSQT0586A

TV

/

DVD

/

VCR Combination

Operating Instructions

Model No. PV-DF2702-K

• Initial Setup and Connection Procedures are on pages 11 to 17.

As an ENERGY STAR Partner, Panasonic has determined that this product or

product model meets the ENERGY STAR guidelines for energy efficiency.

Initial Setup

TV Operation

Basic Operation

Timer Operation

For Your Information

Advanced Operation

DF2702-K(P01).p65 2002/03/08, 18:271

Important Safeguards and Precautions

2

INSTALLATION

1 POWER SOURCE CAUTION

Operate only from power source indicated on unit

or in this manual. If uncertain, have your Electric

Utility Service Company or Video Products Dealer

verify your home power source.

2 POWER CORD PLUG

For safety, this unit has a polarized type plug (one

wide blade), or a three-wire grounding type plug.

Always hold the plug firmly and make sure your

hands are dry when plugging in or unplugging the

AC power cord. Regularly remove dust, dirt, etc.

on the plug.

POLARIZED PLUG CAUTION:

The plug fits into outlet only one way. If it cannot be

fully inserted, try reversing it. If it still will not fit, have

an electrician install the proper wall outlet. Do not

tamper with the plug.

GROUNDING PLUG CAUTION:

The plug requires a three-hole grounding outlet.

If necessary, have an electrician install the proper

outlet. Do not tamper with the plug.

3 POWER CORD

To avoid unit malfunction, and to protect against

electrical shock, fire or personal injury:

- Keep power cord away from heating appliances

and walking traffic. Do not rest heavy objects on,

or roll such objects over the power cord.

- Do not tamper with the cord in any way.

- An extension cord should have the same type

plug (polarized or grounding) and must be

securely connected.

- Overloaded wall outlets or extension cords are

fire hazards.

- Frayed cords, damaged plugs, and damaged or

cracked wire insulation are hazardous and should

be replaced by a qualified electrician.

4 DO NOT BLOCK VENTILATION HOLES

Ventilation openings in the cabinet release heat

generated during operation. If blocked, heat

build-up may result in a fire hazard or heat

damage to cassettes or discs.

For your protection:

a. Never cover ventilation slots while unit is ON,

or operate unit while placed on a bed, sofa,

rug, or other soft surface.

b. Avoid built-in installation, such as a book case

or rack, unless properly ventilated.

5

AVOID EXTREMELY HOT LOCATIONS OR

SUDDEN TEMPERATURE CHANGES

Do not place unit over or near a heater or radiator,

in direct sunlight, inside closed vehicles,

in high temperature [over 95 °F (35 °C)], or in over

75% humidity. If unit is suddenly moved from a

cold place to a warm one, moisture may

condense in unit and on the tape causing

damage. Never subject unit to vibration, impact,

or place it so that the surface is tilted as internal

parts may be seriously damaged.

6 TO AVOID PERSONAL INJURY

• Never place unit on support or stand that is not

firm, level, and adequately strong. The unit could

fall causing serious injury to a child

or adult and damage to the unit.

• Move any appliance and cart

combination with care.

Quick stops, excessive force, and

uneven surfaces may cause objects to overturn.

• Carefully follow all operating instructions.

USING THE UNIT

Before unit is brought out of storage or moved to a new location,

refer again to the INSTALLATION section of these safeguards.

1 KEEP UNIT WELL AWAY FROM WATER OR

MOISTURE, such as vases, sinks, tubs, etc.

2 IF EXPOSED TO RAIN, MOISTURE, OR

STRONG IMPACT, unplug unit and have it inspected

by a qualified service technician before use.

3 ELECTRICAL STORMS

During a lightning storm, or before leaving unit unused for

extended periods of time, disconnect all equipment from

the power source as well as the antenna and cable system.

4 WHEN UNIT IS PLUGGED IN

• DO NOT OPERATE IF:

- liquid has spilled into unit.

- unit was dropped or otherwise damaged.

- unit emits smoke, odours, or noises.

Immediately unplug unit, and have it inspected by a

service technician to avoid potential fire and shock hazards.

•

Never drop or push any object through openings in unit.

Touching internal parts may cause electric shock or fire hazard.

Do not put any foreign object on the tray.

• Keep magnetic objects, such as speakers, away from

unit to avoid electrical interference.

5 USING ACCESSORIES

Use only accessories recommended by the manufacturer

to avoid risk of fire, shock, or other hazards.

6 CLEANING UNIT

Unplug unit. Use a clean, dry, chemically untreated cloth to

gently remove dust or debris. DO NOT USE cleaning fluids,

aerosols, or forced air that could over-spray, or seep into unit and

cause electrical shock. Any substance, such as wax, adhesive

tape, etc. may mar the cabinet surface. Exposure to greasy,

humid, or dusty areas may adversely affect internal parts.

READ AND RETAIN ALL SAFETY AND

OPERATING INSTRUCTIONS. HEED ALL

WARNINGS IN THE MANUAL AND ON UNIT

SERVICE

1 DO NOT SERVICE PRODUCT YOURSELF

If, after carefully following detailed operating instructions, the

unit does not operate properly, do not attempt to open or

remove covers, or make any adjustments not described in the

manual. Unplug unit and contact a qualified service technician.

2 REPLACEMENT OF PARTS

Make sure the service technician uses only parts specified

by the manufacturer, or have equal safety characteristics

as original parts. The use of unauthorized substitutes may

result in fire, electric shock, or other hazards.

3 SAFETY CHECK AFTER SERVICING

After unit is serviced or repaired, request that a thorough safety

check be done as described in the manufacturer’s service

literature to ensure video unit is in safe operating condition.

GROUND

CLAMP

ELECTRIC

SERVICE

EQUIPMENT

ANTENNA

LEAD IN

WIRE

ANTENNA

DISCHARGE UNIT

(NEC SECTION 810-20)

GROUNDING CONDUCTORS

(NEC SECTION 810-21)

GROUND CLAMPS

POWER SERVICE GROUNDING

ELECTRODE SYSTEM

(NEC ART 250, PART H)

NEC

- NATIONAL ELECTRICAL CODE

OUTDOOR ANTENNA INSTALLATION

1 SAFE ANTENNA AND CABLE CONNECTION

An outside antenna or cable system must be properly

grounded to provide some protection

against built up static charges

and voltage. Section 810

of the National Electrical

Code, ANSI/NFPA 70 (in

Canada, part 1 of the

Canadian Electrical Code)

provides information

regarding proper grounding of the mast and supporting

structure, grounding of the lead-in wire to an antenna

discharge unit, size of grounding conductors, location of

antenna discharge unit, connection to grounding

electrodes, and requirements for the grounding electrode.

2 KEEP ANTENNA CLEAR OF HIGH VOLTAGE

POWER LINES OR CIRCUITS

Locate an outside antenna system well away from power

lines and electric light or power circuits so it will never

touch these power sources should it ever fall. When

installing antenna, absolutely never touch power lines,

circuits or other power sources as this could be fatal.

DF2702-K(P02-3).p65 2002/03/08, 18:272

3

Safety Precautions

WARNING:

To prevent fire or shock hazard, do not expose this equipment to rain or moisture.

CAUTION : To prevent electric shock, match wide blade of plug to wide slot, fully insert.

This video recorder, equipped with the HQ (High Quality) System, is compatible with existing

VHS equipment. Only use those tapes with the

mark. It is recommended that only cassette

tapes that have been tested and inspected for use in 2, 4, 6, and 8 hour VCR machines be used.

This television receiver provides display of television closed captioning.

CAUTION:

UNIT IS A CLASS I LASER PRODUCT.

HOWEVER THIS UNIT USES A VISIBLE LASER BEAM WHICH COULD

CAUSE HAZARDOUS RADIATION EXPOSURE IF DIRECTED. BE

SURE TO OPERATE THE UNIT CORRECTLY AS INSTRUCTED.

WHEN THIS UNIT IS PLUGGED TO THE WALL OUTLET, DO NOT

PLACE YOUR EYES CLOSE TO THE OPENING OF THE DISC TRAY

AND OTHER OPENINGS TO LOOK INTO THE INSIDE OF THIS UNIT.

USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF

PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY

RESULT IN HAZARDOUS RADIATION EXPOSURE.

DO NOT OPEN COVERS AND DO NOT ATTEMPT TO REPAIR THE

UNIT YOURSELF. REFER SERVICING TO QUALIFIED PERSONNEL.

CAUTION:

LASER RADIATION WHEN

OPEN. DO NOT STARE

INTO BEAM.

(Inside of product)

This symbol warns the user that uninsulated voltage

within the unit may have sufficient magnitude to cause

electric shock. Therefore, it is dangerous to make any

kind of contact with any inside part of this unit.

This symbol alerts the user that important literature

concerning the operation and maintenance of this unit

has been included. Therefore, it should be read carefully

in order to avoid any problems.

CAUTION: TO REDUCE THE RISK

OF ELECTRIC SHOCK, DO NOT

REMOVE COVER (OR BACK)

NO USER-SERVICEABLE PARTS

INSIDE REFER SERVICING TO

QUALIFIED SERVICE PERSONNEL

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION

Region Management Information

Region Management Information: This unit is designed and

manufactured to respond to the Region Management

Information that is recorded on a DVD disc. If the Region

number described on the DVD disc does not correspond to

the Region number of this unit, this unit cannot play this disc.

The Region number

for this unit is 1.

1

This product utilizes both a Cathode Ray Tube (CRT) and other components that contain lead.

Disposal of these materials may be regulated in your community due to environmental

considerations. For disposal or recycling information please contact your local authorities, or the

Electronics Industries Alliance: <http://

www.eiae.org.>

DF2702-K(P02-3).p65 2002/03/08, 18:273

4

Before Using

Congratulations

on your purchase of one of the most

sophisticated and reliable products on the

market today. Used properly, it will bring you

and your family years of enjoyment. Please fill

in the information below. The serial number is

on the tag located on the back of your unit.

Date of Purchase

Dealer Purchased From

Dealer Address

Dealer Phone No.

Model No.

PV-DF2702-K

Serial No.

Remote Control

LSSQ0302

Batteries 2 “AA”

Accessories

Battery replacement caution

• Do not mix old and new batteries.

• Do not mix alkaline with manganese batteries.

1) Open the cover.

3) Close the cover.

2) Insert batteries as

marked.

Break off the tab

to protect.

Record Tab

Screw driver

Cover the hole

with cellophane tape.

To record again.

Prevent Accidental Tape Erasure

Loading the Batteries

Record/Playback Time

Only use tapes with the mark in this unit.

SP (Standard Play)

2 Hours

40 Minutes

1 Hour

2 Hours

5 Hours

20 Minutes

2 Hours

4 HoursLP (Long Play)

3 Hours

6 Hours

8 HoursSLP

(Super Long Play)

Type of Video Cassette

Tape Speed

Setting

T160T120T60

DF2702-K(P04 Before).p65 2002/03/08, 18:274

5

Table of Contents

Initial Setup

Important Safeguards and Precautions / Safety Precautions ........ 2 - 3

Before Using ........................................................................................ 4

Information (Unit, Cassette, Disc) .................................................. 6 - 7

Location of Controls ..................................................................... 8 - 11

Connections ................................................................................ 11 - 13

Initial Setup .................................................................................. 14, 15

Reset Language, Channels, Clock, Time Zone Adjust .............. 16, 17

TV / VCR

Timer Operation

Timer Recording .......................................................................... 30, 31

TV / VCR

TV Operation

TV Operation ..................................................................................... 22

MTS Broadcast / TV Stereo System ................................................. 23

Closed Caption System ............................................................... 24, 25

TV Timer Features ............................................................................. 26

On-Screen Display (OSD) ................................................................. 27

FM Radio ..................................................................................... 28, 29

TV / VCR

Basic Operation

Playback a Tape ................................................................................ 18

Record On a Tape ............................................................................. 18

Copy Your Tapes (Dubbing) .............................................................. 19

TV / VCR

Basic DVD Operation .................................................................. 20, 21

DVD

For Your Information

Warning and Instruction Displays ..................................................... 63

Before Requesting Service ......................................................... 64, 65

Warranty/Servicentre List .................................................................. 67

Index ............................................................................................ 68, 69

TV / VCR

Settings for DVD Operation ........................................................ 60 - 62

Language Code List .......................................................................... 66

Advanced Operation

Cable Box Universal Remote Control Feature ............................ 32, 33

Tape Operation ........................................................................... 34 - 37

Special VCR Features ................................................................. 38, 39

V-Chip Control Feature .............................................................. 40 - 45

Audio Features ............................................................................ 46, 47

Video / Audio Menu ........................................................................... 48

Video / Audio Adjustment .................................................................. 49

TV / VCR

Disc Operation ............................................................................ 50 - 54

DVD Operation using On-Screen Displays ................................ 55 - 57

MP3 Playback Operation .................................................................. 58

DVD Lock Feature ............................................................................. 59

DVD

Initial Setup

TV Operation

Basic Operation

Timer Operation

For Your Information

DVD

Advanced Operation

DF2702-K(P05 contents).p65 2002/03/08, 18:275

6

Information (Unit, Cassette, Disc)

V

I

DE

O

HEADS

M

AY

NEED C

LEA

N

I

N

G

P

L

EASE

I

NSERT

HEAD

C

LEA

N

I

N

G

CASSETTE

OR

REFER

T

O

M

A

NU

AL

END

:

P

L

AY

Playing older or damaged tapes may eventually

cause video heads to become clogged.

Head Clog Sensor

Display

Picture Tube: 27 inch diagonal pure flat

Picture Tube

VCR

Video Recording System:

4 rotary heads helical

scanning system

Audio Track: 1 track (Normal)

2 channel

(Hi-Fi Audio Sound)

Tuner

Broadcast Channels: VHF 2 ~ 13, UHF 14 ~ 69

CABLE Channels: Midband A through I (14 ~ 22)

Superband J through W (23 ~ 36)

Hyperband AA ~ EEE (37 ~ 64)

Lowband A-5 ~ A-1 (95 ~ 99)

Special CABLE channel 5A (01)

Ultraband 65 ~ 94, 100 ~ 125

FM Radio

Band range: 87.5 ~ 108.1 MHz

General

Power Source: 120V AC, 60 Hz

Power Consumption: Power On

Approx. 174 watts

Power Off

Approx. 3.5 watts

Television System: EIA Standard NTSC colour

Speaker: 2 pieces

Operating Temperature: 5 °C ~ 35 °C (41 °F ~ 95 °F)

Operating Humidity: 10 % ~ 75%

Weight: 52 kg (114.4 lbs.)

Dimensions: 760(W) x 651 (H) x 503 (D) mm

29-15

/

16

” (W) x

25

-

5

/

8

” (H) x

19-13/16

” (D)

Discs played

(1) DVD-VIDEO disc 5” (12 cm) single-sided,

single-layer

5

”

(12 cm) single-sided,

double-layer

5

”

(12 cm) double-sided,

double-layer

(one layer per side)

3” (8 cm) single-sided,

single-layer

3” (8 cm) single-sided,

double-layer

3” (8 cm) double-sided,

double-layer

(one layer per side)

(2) Compact disc 5” (12 cm) disc

(CD-DA, VIDEO CD) 3” (8 cm) disc

Digital audio output:

Optical digital output: Optical connector

Pickup: Wave length:

655 nm (DVD)

790 nm (Video CD/CD)

Laser power: CLASS II

Note : Designs and specifications are subject to change

without notice.

SpecificationsHead Cleaning

Unit auto adjusts clock for DST (Daylight Saving Time.)

DST (Daylight Saving Time)

■■

■ Spring (First Sunday in April)

DST : ON

➛➛

➛ Sets clock ahead one hour.

■■

■ Autumn (Last Sunday in October)

DST : ON

➛➛

➛ Turns clock back one hour.

• If your area does not observe Daylight Saving

Time, select DST : OFF (see “Clock” on pages

16 and 17).

• Keep these time changes in mind when

programming the unit for timer recordings.

Features for a Quality Picture

Digital Auto Tracking

Continuously analyzes the signal and adjusts for

optimum picture quality.

Manual Tracking Control (to reduce picture noise)

Use during Playback and Slow Motion mode to

reduce picture noise. Press the 3 or 6 number key

on the remote control or CH on the unit until the

picture clears up. To return to Auto Tracking, press

POWER off, then on again a few seconds later.

V-Lock Control

In Still mode, the 3 or 6 number key on the remote

control or CH on the unit operate as a V-Lock

control to reduce jitter.

Pure Flat Picture Tube

This unit is equipped with Pure Flat picture tube.

• Use “dry” type head cleaning cassette only.

(Part No. NV-TCL30PT is recommended.)

• Follow cleaning tape directions carefully.

Excessive use of head cleaning tape can shorten

the video head life.

• If head clog symptoms persist, contact your

nearest Factory Servicentre or authorized

Servicentre. (See Page 67.)

During playback this

screen appears if clogging

is detected. To remove

screen, press PLAY on the

remote or unit.

DF2702-K(P06-7 Information).p65 2002/03/08, 18:276

7

Initial Setup

Definition of Terms

Angle

Some DVD discs feature scenes simultaneously

shot from different angles. The ANGLE button can be

used to view the scene from different angles.

(ANGLE Indicator lights up on the unit when a scene

recorded at different angles is detected.)

Chapter Number

Titles are subdivided into numbered sections. You can

quickly search for a favourite scene using these numbers.

DVD

A high-density optical disc on which high-quality

pictures and sound have been digitally recorded.

DVD incorporates new video compression technology

(MPEG II) and high-density recording technology

which allow entire movies to be recorded with

incredible playback quality.

Playback Control

With Video CD (version 2.0), scenes or information

may be selected for viewing or listening from an

interactive menu that appears on the TV screen.

Subtitles

Written dialogue which appears at the bottom of the screen.

Time Number

The elapsed play time from the start of a disc or title.

Use to quickly find scenes.

(May not work with some discs.)

Title Number

For DVD discs with two or more titles, the title is

numbered as title 1, title 2, etc.

Track Number

Numbers assigned to tracks on Video CDs and CDs

to allow specific tracks to be quickly located.

Video CD

CD containing picture and sound with same quality

level as video tape. This unit also supports Video

CDs with playback control (version 2.0).

Apparatus Claims of U.S. Patent Nos. 4,631,603, 4,577,216,

and 4,819,098, licensed for limited viewing uses only.

If disc is brought from a cold to a warm

environment, moisture may form on the disc

Wipe away moisture with a soft, dry, lint-free cloth

before using disc. (See above.)

Improper disc storage

Discs could be damaged if stored or left in areas:

• exposed to direct sunlight.

• that are humid or dusty.

• near heat (i.e. heater, radiator, etc.).

Disc Handling

Disc tray

Disc

Disc formats supported by this unit

The unit can play back discs bearing any of

the following marks:

Discs which cannot be played with this unit

• DVD with Region No. other than “1” or “ALL”

• DVD of PAL system

• DVD-ROM

• DVD-R/DVD-RAM

• CD-ROM

• CDV

• CD-G

• Do not try to play a Photo CD.

DVD

3” (8 cm) disc / 5” (12 cm) disc

Video CD

3” (8 cm) disc / 5” (12 cm) disc

CD

3” (8 cm) disc / 5” (12 cm) disc

is a registered trademark.

Handling precautions

• Only hold disc by edges as shown.

Fingerprints, dirt, and scratches

can cause skipping and distortion.

• Do not write on label

side of disc.

• Never use record

cleaning sprays, benzine,

thinner, static electricity

prevention liquids, or any

other solvent.

• Be careful not to drop or

bend disc.

• Do not place more than

1 disc on disc tray.

• Do not try to close disc

tray when disc is not

properly placed.

• Always store discs in their

proper cases when

not in use.

To clean disc surface

With a soft, damp (water only) cloth, gently wipe from

the centre hole to the outer edge as shown below.

(Wiping in a circular pattern will scratch the surface.)

This product incorporates copyright protection technology

that is protected by method claims of certain U.S. Patents

and other intellectual property rights owned by Macrovision

Corporation and other rights owners. Use of this copyright

protection technology must be authorized by Macrovision

Corporation, and is intended for home and other limited

viewing uses only unless otherwise authorized by

Macrovision Corporation. Reverse engineering or

disassembly is prohibited.

DF2702-K(P06-7 Information).p65 2002/03/08, 18:277

8

Location of Controls

Remote Control Buttons

SKIP

STILL/PAUSE

MENU

Displays DVD menu.

screen. In Stop mode, goes to the counter

3 minutes of tape.

“0:00:00”. In Play mode, skips

over 1 to

DVD

Sets to DVD mode.

LIGHT

See next page.

DSS/CABLE

Sets the remote to control some

basic DDS or Cable box functions.

FM

Receives FM radio signal.

VOLUME UP/DOWN

Adjusts volume.

RAPID TUNE

Displays the last channel

you were watching.

ADD/DELETE/CLEAR

Adds or deletes a channel.

Cancels an item on the screen.

SUB TITLE

Selects a different subtitle language.

DISPLAY/ENTER

Displays the TV status and clock.

In DVD mode, displays disc and

unit information.

In DSS or CABLE mode, it may be

necessary after channel selection.

PROGRAM

Displays SET PROGRAM screen.

You can set Timer Program and

On-Timer.

FF/SLOW+

Fast forwards tape and forward

visual search. Increases slow

motion speed in Still mode.

ZOOM/COUNTER RESET

Enlarges specific portions of DVD

picture. Resets to “0:00:00” at

desired portion of tape.

REC

Records a program.

STOP

Stops recording or playback.

RETURN/SPEED

Returns to DVD menu screen.

Selects recording speed of tape.

EJECT/OPEN/CLOSE

See next page.

POWER

Turn the unit on or off.

TV/VCR

Sets to TV/VCR mode.

MUTE

Mutes the sound instantly.

CHANNEL UP/DOWN

Selects a channel.

SURROUND

Creates a deeper, 3-D sound effect.

NUMBER Keys

Selects a channel directly.

ANGLE

Selects the desired angle

in DVD mode.

AUDIO

Selects the desired audio mode.

TITLE

Selects the desired title by number

on some DVDs.

SELECT

Control navigation around

on-screen menu.

ACTION

Displays Main Menu.

SET

Sets a selected menu.

REW/SLOW-

Rewinds tape and searches reverse

scene. Decreases slow motion

speed in Still mode.

Pauses picture in Play mode and

frame advance picture in Still mode.

PLAY

Begins

/CM SKIP/ZERO SEARCH

Skips one chapter or track. Goes to next

playback.

SKIP /SEARCH

Skips back one chapter or track. Goes to

previous menu screen. Goes directly

to the desired recording. Locates end

point of recording.

DF2702-K(P08-11 Location).p65 2002/03/08, 18:278

9

Universal Light Tower

®

Illuminated Remote Control

LIGHT button:

When LIGHT is pressed, (DVD,

, DSS/CABLE, CH UP/DOWN, VOL UP/DOWN)

buttons will light for 5 seconds for easy button location.

If no button is pressed in 5 seconds, the light goes out to conserve the battery.

EJECT/OPEN/CLOSE button:

When this button is pressed in TV-VCR mode, the tape is ejected.

This button is inoperative if pressed during recording.

If pressed in DVD mode, the disc tray opens or closes.

Indicators on the Front Panel

Initial Setup

Remote Sensor

ANGLE Indicator

Lights up when a scene

recorded at different

angles is detected.

(DVD only).

PROG TIMER Indicator

set for Timer Recording.

It flashes when a Timer

Recording has been set with

no tape inserted, the clock

is not set, or the tape is in

motion.

Pg. 26

REC Indicator

Lights up during recording.

In Rec Pause or OTR

Pause mode, the Indicator

flashes.

Pg. 18

ON-TIMER Indicator

Lights up when the On Timer

is set

Pg. 26

Lights up when the unit is

Pg. 51

DF2702-K(P08-11 Location).p65 2002/03/08, 18:279

10

Location of Controls (continued)

Front View of the unit

Built In Speaker (✕ 2)

Disc Tray

Cassette Compartment

TV/FM (See page 8.)

STOP/EJECT (See page 8.)

PLAY/REPEAT (See page 8.)

CHANNEL UP/DOWN

TRACKING UP/DOWN

(See page 8.)

If the disc cannot be removed,

First unplug unit.

Then, prepare a rigid wire (e.g. an

extended paper clip, etc.) and, applying

moderate force, insert it straight into

the hole at the base of the tray. The tray

will eject a little. Now, pull the tray all

the way out and remove the disc.

Audio/Video Input

Connector 2 (LINE 2)

Connect from other

component.

Phones Jack

Connect an earphone

or headphones.

OPEN/CLOSE (See page 8.)

SKIP (See page 8.)

PAUSE (See page 8.)

POWER (See page 8.)

STOP (See page 8.)

VOLUME UP/DOWN (See page 8.)

FAST FORWARD/SEARCH

(See page 8.)

REWIND/SEARCH (See page 8.)

PLAY (See page 8.)

REC (See page 8.)

Over 2 inches

S-Video Input Connector

Connect from other

component with S-Video.

DF2702-K(P08-11 Location).p65 2002/03/08, 18:2710

11

Rear View of the unit

Initial Setup

Connections

VHF/UHF

DIGITAL AUDIO OUT

PCM/BITSTREAM

OPTICAL COXIAL

VHF/UHF

IN from

ANT./CABLE

VHF/UHF

DIGITAL AUDIO OUT

PCM/BITSTREAM

OPTICAL COXIAL

IN

from

ANT./CABLE

Cable TV

Converter Box

VHF/UHF

For ANT./Cable

Connect the cable from

Antenna/Cable to the VHF/UHF

terminal on the unit.

For DSS/Cable Box

Connect the OUT jack on your

cable box to the VHF/UHF

terminal on the unit with a RF

cable.

WARNING

Overtightening “Nut type” RF coaxial cables

may damage jacks. Finger tighten only.

See below.

electric power in OFF condition.

AC Power Plug

When plugged into an AC outlet,

this unit consumes 3.5 W of

VHF/UHF Antenna

Input Terminal

Audio Output

Connector (L/R)

Pg. 12

Optical digital audio

output connector

Pg. 13

Audio/Video Input

Connector 1 (LINE 1)

Connect from

other component.

S-Video Input

Connector

Connect from

other component

with S-Video.

DF2702-K(P08-11 Location).p65 2002/03/08, 18:2711

12

Connections (continued)

Amplifier

Unit

Speaker

AUDIO OUT

R L

AUDIO IN

Notes on audio output from the optical digital

audio output connector

Enjoying digital audio output from the

digital audio output connector

*1 The type of audio output from the connector can be

selected by the Settings for DVD Operation. (See

page 61.)

*2 Sound having 96 kHz sampling is converted into 48

kHz sampling when it is output from the unit’s optical

digital audio output connector.

For your reference:

• Dolby Digital is a digital sound compression technique

developed by the Dolby Laboratories Licensing

Corporation. Supporting 5.1-channel surround sound,

as well as stereo (2-channel) sound, this technique

enables a large quantity of sound data to be efficiently

recorded on a disc.

• Linear PCM is a signal recording format used in CDs.

While CDs are recorded in 44.1 kHz/16 bit, DVDs are

recorded in 48 kHz/16 bit up to 96 kHz/24 bit.

• If you have a Dolby Pro Logic Surround decoder, you

will obtain the full benefit of Pro Logic from the same

DVD movies that provide full 5.1 channel Dolby Digital

soundtracks, as well as from titles with the Dolby

Surround mark. For information on Panasonic or

Technics Dolby Pro Logic Surround Sound Decoders

please contact your local dealer.

Ready Checklist

Turn down the volume, then turn this unit, as well as

other equipment to be connected, off before

proceeding with connection.

Do not block ventilation holes of any of the

equipment and arrange them so that air can

circulate freely.

Read through the instructions before connecting

other equipment.

Ensure that you observe the colour coding when

connecting audio and video cables.

Disc

DVD

Video

CD

MP3

Sound

recording

format

Dolby Digital

Linear PCM

(48/96 kHz

16/20/24 bit)

dts

MPEG 1

Linear PCM

MP3

Optical digital audio

output from connector

Dolby Digital bitstream

(1-5.1 ch) or OFF (no

output)*

1

Linear PCM (2ch)

(48 kHz sampling/16 bit

only)*

2

or no output*

1

Bitstream or no output*

1

PCM

(44.1 kHz sampling)

Linear PCM

(44.1 kHz sampling)

Linear PCM

(It depends on the MP3 file)

■ Unit

➛➛

➛ Amplifier

➛➛

➛ Speaker

Audio connections

Manufactured under license from Dolby

Laboratories. “Dolby”, “Pro Logic” and the

double-D symbol are trademarks of Dolby

Laboratories. Confidential Unpublished Works.

reserved.

DF2702-K(P12-13) connect.p65 2002/03/08, 18:2712

13

Initial Setup

Unit

Optical digital audio

cable (optional)

Decoder with Dolby Digital/

dts processing (optional)

Amplifier

Centre speaker

Front

Speaker

Front

Speaker

Subwoofer

Surround

speaker

Surround

speaker

■ Unit

➛➛

➛ Dolby Digital Decoder

➛➛

➛ Amplifier

➛➛

➛ Speaker

or

Unit

➛➛

➛ dts (digital theatre systems) Decoder

➛➛

➛ Amplifier

➛➛

➛ Speaker

When DVDs recorded in Dolby Digital or dts are played, Dolby Digital bitstream or dts

bitstream is output from the unit Optical digital audio output connector. When the unit is

connected to a Dolby Digital decoder or dts decoder, you can enjoy theatre-quality audio in

your home. [An optical digital audio cable (optional) is required when an optional Dolby

Digital decoder or dts decoder is used.]

Notes on connecting an Optical

digital audio cable (optional)

• Firmly connect the cable to the

connector.

IMPORTANT NOTE:

Caution for optical digital audio

output connector:

• When connecting an amplifier (with

an Optical digital input connector)

which does not contain the Dolby

Digital or dts decoder, be sure to

select “OFF” at “Dolby Digital” and

“OFF” at “dts” of the Settings for

DVD Operation “AUDIO OUTPUT”

(see page 61). Otherwise, any

attempt to play DVDs may cause

such a high level of noise that it may

be harmful to your ears and damage

your speakers.

• When a dts decoder is connected,

please select “Bitstream” at “dts” of

the Settings for DVD Operation

“AUDIO OUTPUT”. If “OFF” is

selected, there will be no sound.

(See page 61).

• Video CDs and CDs can be played

as normal.

Note:

• Some dts decoders which do not

support DVD-dts interface may not

work properly with the unit.

DF2702-K(P12-13) connect.p65 2002/03/08, 18:2713

14

Plug the unit power cord into an AC wall outlet.

Initial Setup (Ready to Play)

1

3

Press on the remote for TV-VCR mode.

2

• If you use a cable box, turn it on and set it to the Public

Broadcasting Service (PBS) channel in your time zone.

If you use a DSS receiver, it must be turned off.

ACTION

TV-VCR

SELECT

SET

POWER

Initial Setup (Ready to Play)

Please make all cable or antenna connections before powering on.

Press POWER* on the remote or unit. The unit

comes on and auto channel and clock set starts.

CH AUTO SET PROCEEDING

Settings are made automatically.

When setup is done, this screen appears.

PROCEEDING

AUTO CLOCK SET

CANCEL : PRESS STOP KEY

If AUTO CLOCK SET IS INCOMPLETE

screen appears, set the clock using MANUAL

CLOCK SET procedure on next page.

PLEASE

SET

CLOCK BY

P

R

ESS

I

NG

ACT

I

ON

KEY

A

UTO

C

L

OCK SET

I S I NCO

M

P

L

ETE

2

/

6

/

2002

W

ED

12

:

00

P

M

DST

:

O

N

A

UTO

C

L

OCK SET

CO

M

P

L

ETED

SETT

I

N

G

:

CH

1

0

DF2702-K(P14-15)Initial setup.p65 2002/03/08, 18:2714

15

Initial Setup

*

Important:

If a remote control button does not work when pressed, press the button on the remote

and try the button again.

Manual Clock Set

If AUTO CLOCK SET was incomplete, manually

set the clock as follows.

Press ACTION on the Remote to

display SET CLOCK Menu screen.

1

SET

:

SET

SE

L

E

C

T

:

END

:

ACT

I

O

N

SET

C

L

OC

K

DST

:

O

N

SE

L

E

C

T

M

O

N

TH

Press to select the month and

press SET to set. In the same

manner, select and set the date,

year, time, and DST. (Daylight

Saving Time)

2

Press ACTION twice to start

CLOCK and exit.

3

Reset all unit Memory Functions

When moving unit to a new location, or if a

mistake was made in the Initial Setup section.

• Make sure a tape is not inserted in the unit.

Turn the unit

Power on.

1

Press and hold both PLAY and FF

on the unit for more than 5

seconds.

• The power will shut off.

• Please ignore “NO CASSETTE” warning.

2

Perform “Initial Setup” on the 14.

3

Note to CABLE system installer:

This reminder is provided to call the CABLE (Cable TV) System

Installers attention to Article 820-40 of the NEC that provides

guidelines for proper grounding and, in particular, specifies that

the cable ground shall be connected to the grounding system of

the building, as close to the point of cable entry as practical.

DF2702-K(P14-15)Initial setup.p65 2002/03/08, 18:2715

16

Reset Language, Channels, Clock, Time Z

3) Press to select

“MANUAL,” then

press SET.

(For Auto Clock Set,

select “AUTO CLOCK

SET,” and press SET.)

3) Press to select

“ANTENNA,” then

press SET to set

your antenna system

(“TV” or “CABLE”).

4) Press to select

“AUTO SET,” then

press SET.

• After Channel Auto

Set is finished, Clock

Auto Set will be

performed.

(If clock is set

manually, Clock Auto

Set will not be

performed.)

(“TIME ZONE ADJUST”

appears only when

auto clock is set.)

1) Press to

select language

icon.

2) Press SET

repeatedly.

Language

Channels

Clock

Press ACTION*

to display MAIN MENU.

3) Press ACTION to

exit.

1) Press to

select “CH.”

2) Press SET.

1) Press to

select “CLOCK.”

2) Press SET.

SET

:

SET

BACK

:

END

:

ACT

I

O

N

SET

C

L

OC

K

DST

:

O

N

2 / 6/

:

2002

WED

12

00

PM

SE

L

E

C

T

HOUR

SE

L

E

C

T

:

1

2

For English

For Spanish

For French

M

A

I

N

M

EN

U

DVD

LOCK

CH

C

L

OC

K

TV

LANGUAGE

END :

ACT

I

O

N

SE

L

E

C

T

:

SET

:

SET

5

3

1

M

A

I

N

M

EN

U

DVD

LOCK

CH

C

L

OC

K

TV

LANGUAGE

END :

ACT

I

O

N

SE

L

E

C

T

:

SET

:

SET

5

3

1

MENU PR

I

NCIPAL

DVD

BLOQUEO

CANAL

RELOJTV

ID

I

OMA

TERM

I

NAR :

ACT

I

O

N

ELEG

I

R

:

F

I

JAR

:

SET

5

3

1

HOLA

MENU

DVD

BLOCAGE

CANAL

HORLOGETELE

LANGUE

FIN :

ACT

I

O

N

SEL.

:

REGLER

:

SET

5

3

1

BONJOUR

M

A

I

N

M

EN

U

DVD

LOCK

CH

C

L

OC

K

TV

LANGUAGE

END :

ACT

I

O

N

SE

L

E

C

T

:

SET

:

SET

5

3

1

HELLO

M

A

I

N

M

EN

U

DVD

LOCK

CH

C

L

OC

K

TV

LANGUAGE

END

:

ACT

I

O

N

SE

L

E

C

T

:

SET

:

SET

5

3

1

ANT

ENN

A

:

C

ABLE

A

U

T

O

S

E

T

CHANNEL CAPT

I

ON

W

EAK

S

I

GNAL

D

I

SPLAY

:

OFF

SELE

C

T

:

SET

:

SET

END

:

ACT

I

O

N

SET UP

CH

A

NNE

L

AUT

O

C

L

OC

K SET

M

A

NU

AL

T

I

M

E

ZO

N

E

A

D

JUS

T

:

0

SELE

C

T

:

SET

:

SET

END

:

ACT

I

O

N

SET

C

L

OC

K

M

A

I

N

M

EN

U

DVD

LOCK

CH

C

L

OC

K

TV

LANGUAGE

END

:

ACT

I

O

N

SE

L

E

C

T

:

SET

:

SET

5

3

1

<Example MANUAL

CLOCK SET screen>

Continued on the

next page.

DF2702-K(P16-17 lang ch clk).p65 2002/03/08, 18:2716

17

Initial Setup

4)Press and

press SET to select

and set the month,

date, year, time, and

DST (Daylight Saving

Time)

.

To Make Corrections,

repeatedly press

to move to error, then

correct.

5)Press ACTION twice

to start the clock and

exit this mode.

3)Press to select

“TIME ZONE

ADJUST” and

press or to

subtract or add

hour(s) as

necessary.

4)Press ACTION

twice to exit.

•“TIME ZONE ADJUST”

returns to “0” if clock is

set manually.

(Only when Auto Clock is set.)

Add or Delete a Channel

Time Zone Adjust

1) Press to

select “CLOCK.”

2) Press SET.

AUT

O

C

L

OC

K SET

M

A

NU

AL

T

I

M

E

ZO

N

E

A

D

JUS

T

:

0

SELE

C

T

:

SET

:

END

:

ACT

I

O

N

SET

C

L

OC

K

AUT

O

C

L

OC

K SET

M

A

NU

AL

T

I

M

E

ZO

N

E

A

D

JUS

T

:

+1

SELE

C

T

:

SET

:

END

:

ACT

I

O

N

SET

C

L

OC

K

C

HANNEL

08

ADDED

To add channel:

Select channel with number

keys and press ADD/DLT.

*

Important:

If a remote control button does not work

when pressed, press the button on

the remote and try the button again.

M

A

I

N

M

EN

U

DVD

LOCK

CH

C

L

OC

K

TV

LANGUAGE

END

:

ACT

I

O

N

SE

L

E

C

T

:

SET

:

SET

5

3

1

ADD/DLT

SELECT

SET

ACTION

NUMBER

keys

C

HANNEL

08

DE

L

E

T

ED

To delete channel:

Select channel with CH

or number keys and press

ADD/DLT.

Time Zone Adjust

DF2702-K(P16-17 lang ch clk).p65 2002/03/08, 18:2717

18

Operation using unit buttons

REC Indicator

Insert a tape.

Record On a Tape

Playback a Tape

1

Insert a tape.

Press PLAY* to play a tape.

2

• The unit power comes

on automatically.

To prevent tape jam,

remove loose or peeling

labels from tapes.

■ Forward/Reverse scene search

➛➛

➛ Press FF/SLOW+ or REW/SLOW-.

➛➛

➛ Press again or PLAY to release.

■ Still (Freeze) picture

➛➛

➛ Press STILL/PAUSE.

➛➛

➛ Press PLAY to release.

■ Slow Motion picture

➛➛

➛ Press FF/SLOW+ (increases speed) or

REW/SLOW- (decreases speed) in

Still mode.

➛➛

➛ Press PLAY to release.

■ Frame by Frame picture

➛➛

➛ Press STILL/PAUSE in Still mode.

➛➛

➛ Press PLAY to release.

Record

tab

■ Stop

➛➛

➛ Press STOP

■ Rewind tape

➛➛

➛ Press REW/SLOW-

in Stop mode

■ Fast forward tape

➛➛

➛ Press FF/SLOW+

in Stop mode

■ Eject tape

➛➛

➛ Press EJECT on the remote

or STOP/EJECT on the unit

• These features work best in SP or SLP mode.

• After the unit is in Still or Slow mode for 3

minutes, it will switch to Stop mode automatically

to protect the tape and the video head.

Ready Checklist

All connections are made.

Your unit is plugged in.

Press CH or number keys to

Select Channel.

• For “LINE1” or “LINE2” input, see bottom

of next page.

2

3

4

Press SPEED to select recording

speed (see page 4).

SP = Standard Play

LP = Long Play

SLP = Super Long Play

• Selected speed is displayed.

Press REC to start recording.

• To edit out unwanted portions, press

STILL/PAUSE to pause and resume

recording.

• You cannot view another channel during

recording.

• After the unit has been in Rec Pause mode

for 5 minutes, it will stop automatically to

protect the tape and the video head.

• The remaining recording time of an OTR can

be displayed by pressing DISPLAY.

■ Stop

➛➛

➛ Press STOP

■ One Touch Recording (OTR)

Press REC repeatedly

to set the recording

length (30 min - 4 hours.)

• The unit stops recording at a preset time.

• PROG TIMER Indicator lights on the unit.

Normal Rec

0:30 1:00

1:302:003:004:00

1

Insert a tape with record tab.

• The unit power comes on automatically.

Notes

CH

REC

Press to stop and/or

eject tape.

PLAY/REPEAT

Notes

EJECT

SELECT

SET

DISPLAY

FF/SLOW+

REW/SLOW-

STOP

REC

STILL/

PAUSE

ACTION

SPEED

CH

• It is not possible to record from DVD/

Video CD/CD to VHS tape using this unit.

PLAY

NUMBER

keys

• If tape has no record tab (see page 4),

auto play begins.

DF2702-K(P18-19) play_rec_copy.p65 2002/03/08, 18:2718

19

Basic Operation

Copy Your Tapes (Dubbing)

• Unauthorized exchanging and/or

copying of copyrighted recordings

may be copyright infringement.

• Please note that some tapes

cannot be dubbed on this unit.

Also, it is not possible to dub

DVD/Video CD/CD to VHS tape

using this unit.

Playback (Source)

1

Recording (Editing) unit

Insert pre-

recorded tape.

Insert blank tape

with record tab.

• Dubbing tapes protected

with Copy Guard will have

poor quality results.

2

3

4

5

Press PLAY then

PAUSE at starting

point to put in

Standby mode.

Press PLAY

to start dubbing.

Press STOP

to stop dubbing.

Select “LINE” mode.

See “Selecting Input Mode” below.

Press REC, then

Press STILL/PAUSE

immediately to put in

Standby mode.

Press STILL/PAUSE

to start dubbing.

Press STOP

to stop dubbing.

Selecting Input Mode

Method 1:

Press CH . The display will change as follows.

Method 2:

a Press ACTION for MAIN MENU.

b Press to select “TV”, then press SET for

SET UP TV screen.

c Press to select “INPUT SELECT,” and then

press SET to select “TUNER”, “LINE1” or “LINE2.”

d Press ACTION twice to exit this mode.

• LINE1 : For rear Audio/Video connection.

LINE2 : For front Audio/Video connection.

1

2

3

125LINE 1

(CABLE)

69

(TV)

or

LINE 2

Caution

STOP

Connections you’ll need to make

(Perform operation of steps 4 and 5 on both units at same time.)

*

Important:

If a remote control button does not work

when pressed, press the button on

the remote and try the button again.

or

OUT

MONO

VIDEO

IN FROM

ANT.

OUT TO

TV

IN

R-AUDIO-L

VIDEO IN L-AUDIO IN-R

Playing (Source) VCR

Recording (Editing) unit

Rear

VIDEO IN L-AUDIO IN-R

LINE1

LINE2

DF2702-K(P18-19) play_rec_copy.p65 2002/03/08, 18:2719

20

5

Press or

number key(s) (see

below) to select title

and press SET to

play.

Basic DVD Operation

Ready Checklist

All connections are made. (See pages 11-13.)

Your unit is plugged in.

If unit is connected to an audio amplifier,

turn the stereo system’s power on.

1

Press POWER* on the remote or unit.

Press DVD to select DVD mode.

Insert a disc.

1) Press OPEN/CLOSE.

2) Place disc into disc tray.

2

3

• If a disc is already inserted, go to step 4.

(Depending on the disc, playback may start

automatically.)

Press PLAY to start play.

Disc tray closes automatically.

4

CLOSE

READING

1

2

If an interactive DVD*

1

or a

Video CD with playback

control*

2

is used and a TITLE

MENU appears, go to step 5.

• You may also close the tray

by pressing OPEN/CLOSE.

• Data reading time differs with

each disc.

1

2

• Hold disc by its edges only

(page 7

) with printed side up

and

use guides to place into

tray. Use

3”(8 cm) or

5” (12 cm) disc.

*

1

Interactive DVD...

May include multiple camera angles,

stories, etc.

*

2

Video CD with playback control...

Particular scenes or information can be

interactively selected from a menu that

appears on the screen.

Operation using unit buttons

Press PLAY.

Insert disc.

Press

OPEN/CLOSE.

3

•

74

3

Press STOP.

6

Press POWER

1

<Example> 1 digit number 1 ••• 1

2 digit number 12 ••• 10➛1➛2

3 digit number 123 •••100➛1➛2➛3

Press SKIP | or | to go to next or previous menu screen.

• SKIP function not available with all discs.

Please refer to disc jacket for operation information.

T

I

TLE MENU

Cas

t

l

es

Love

r

s

Dogs

B

i

r

ds

T

I

TLE MENU

Cas

t

l

es

Love

r

s

Dogs

B

i

r

ds

To return to MENU (play stops)

Press TITLE, MENU, or RETURN. (DVD)

Press RETURN. (Video CD)

Press STOP to stop play.

6

7

Press OPEN/CLOSE to eject the disc.

Using number key(s)

starts play automatically.

Dogs

of the world

DF2702-K(P20-21 Basic DVD).p65 2002/03/08, 18:2820

La page charge ...

Panasonic PVDF2702K Mode d'emploi

Panasonic PVDF2702K Mode d'emploi

dans d''autres langues

Documents connexes

Autres documents