2. Powerfist
  3. 8990889

Powerfist 8990889 Le manuel du propriétaire

  • Bonjour, je suis votre assistant en ligne. J'ai examiné le manuel d'utilisation du COIL ROOFING AIR NAILER. Ce document fournit des informations essentielles telles que les consignes de sécurité, l'entretien, le dépannage ainsi que les étapes d'assemblage et d'installation, l'utilisation correcte de l'outil, y compris le réglage de la profondeur de clouage et l'utilisation du guide de bardeau. N'hésitez pas à me poser des questions sur le contenu de ce manuel ou sur les fonctionnalités de cet outil.
  • Que faut-il faire avant d'utiliser l'outil?
    Quel équipement de protection faut-il porter?
    Que faut-il faire en cas de fixations coincées?
SPECIFICATIONS
HAZARD DEFINITIONS
INTRODUCTION
SAFETY
WARNING! Read and understand all instructions before
using this tool. The operator must follow basic
precautions to reduce the risk of personal injury
and/or damage to the equipment.
WORK AREA
PERSONAL SAFETY
WARNING! Wear personal protective equipment
approved by the Canadian Standards Association (CSA)
or American National Standards Institute (ANSI).
PERSONAL PROTECTIVE EQUIPMENT
PERSONAL PRECAUTIONS
SPECIFIC SAFETY PRECAUTIONS
WARNING! DO NOT let comfort or familiarity with
product (gained from repeated use) replace strict
adherence to the tool safety rules. If you use this tool
unsafely or incorrectly, you can suffer serious personal
injury.
AIR TOOL PRECAUTIONS
AIR HOSE PRECAUTIONS
VIBRATION PRECAUTIONS
UNPACKING
WARNING! Do not operate the tool if any part is
missing. Replace the missing part before operating.
Failure to do so could result in a malfunction and
personal injury.
IDENTIFICATION KEY
ASSEMBLY &
INSTALLATION
OPERATION
NOTICE! The nail will not feed smoothly if the nail
holder is not correctly adjusted.
ADJUSTING THE NAILING DEPTH
USING THE SHINGLE GUIDE
CHANGING THE TRIGGER
WARNING! Contact firing can be dangerous. Only
skilled operators who are aware of the hazards and
familiar with the tool should use contact firing mode.
CARE & MAINTENANCE
WARNING! Only qualified service personnel should
repair the tool. An improperly repaired tool may
present a hazard to the user and/or others.
WARNING! Disconnect the tool from the air supply
before clearing jammed fasteners.
MAINTENANCE SCHEDULE
Maintenance
Required
Description
Tools or
Materials
Required
LUBRICATION
NOTICE! NEVER use a penetrating oil to lubricate the
tool. Penetrating oil may act as a solvent that can
break down the grease and cause the tool to seize up.
DISPOSAL
IMPORTANT! DO NOT pollute the environment by
allowing uncontrolled discharge of waste oil.
TROUBLESHOOTING
Problem(s)
Possible Cause(s)
Suggested
Solution(s)
PARTS BREAKDOWN
PARTS LIST
#
DESCRIPTION
QTY
/