Wacker Neuson EW65 Manuel utilisateur

Machine models E14-02

Edition 1.1

Document order number

Language

From serial no.

5100027465

us

WNCE1402PPAL00162

Operator's Manual

Mobile excavator

This Operator's Manual includes

the AEM Safety Manual CE-1009

5100027465

Printed in Austria.

worldwide.

This document may be used by the receiver only for the designated purpose. It may in no way be duplicated or

translated in any other language, in whole or in part, without prior permission in writing from the manufacturer.

No reproduction or translation of this publication, in whole or part, without the written consent of Wacker Neuson

Linz GmbH.

Violations of legal regulations, in particular of the copyright protection, will be subject to civil and criminal

prosecution.

Wacker Neuson Linz GmbH keep abreast of the latest technical developments and constantly improve their

products. For this reason, we may from time to time need to make changes to figures and descriptions in this

documentation that do not reflect products that have already been delivered and which will not be implemented

on these machines.

Technical data, dimensions and weights are only given as an indication. Responsibility for errors or omissions

not accepted.

The cover features the machine with possible optional equipment. Non-metric weights and measurements are

approximate.

Photographs and graphics are symbolic representations and may differ from the actual products.

Wacker Neuson is authorized to publish copyright-protected material, for example that owned by Perkins

Engines Company Ltd.

The Operator’s Manual and any amendments to it must always be available at the place of use of the machine.

Possible amendments are included at the end of the Operator’s Manual.

Wacker Neuson Linz GmbH

Flughafenstr. 7

A-4063 Hörsching

Phone: +43 (0) 7221 63000

Fax: +43 (0) 7221 63000-2200

E-mail: office.lin[email protected]

Documentation Language Order no.

Operator’s Manual us 5100024873

Spare parts catalog EW65 (E14-02)

de/en/fr 1000346413

it/es/en 1000346414

Legend

Original Operator’s Manual x

Translation of original Operator’s Manual –

Edition 1.1

Date 12/2016

Document OM E14 wheel us*

OM E14 wheel us* 1.1 * E14w_us1_1IVZ.fm I-1

Table of contents

1Foreword

1.1 Operator’s Manual ................................................................................................................................ 1-1

1.2 Warranty and liability ............................................................................................................................ 1-8

2 Safety

2.1 Safety symbols and signal words ......................................................................................................... 2-1

2.2 Qualification of operating personnel ..................................................................................................... 2-2

2.3 Conduct ................................................................................................................................................ 2-3

2.4 Operation.............................................................................................................................................. 2-4

2.5 Lifting gear applications........................................................................................................................ 2-8

2.6 Trailer operation ................................................................................................................................. 2-10

2.7 Attachment operation ......................................................................................................................... 2-10

2.8 Towing, loading and transporting ....................................................................................................... 2-12

2.9 Maintenance ....................................................................................................................................... 2-14

2.10 Measures for avoiding risks................................................................................................................ 2-17

3 Introduction

3.1 Machine overview................................................................................................................................. 3-1

3.2 Brief description of the machine ........................................................................................................... 3-2

3.3 Information and regulations on use ...................................................................................................... 3-4

3.4 Labels ................................................................................................................................................... 3-6

4 Putting into operation

4.1 Cabin/control stand............................................................................................................................... 4-1

4.2 Overview of control elements ............................................................................................................. 4-29

4.3 Indicator lights and warning lights (overview)..................................................................................... 4-36

4.4 Preparatory work ................................................................................................................................ 4-49

4.5 Starting and stopping the engine........................................................................................................ 4-54

5Operation

5.1 Steering system.................................................................................................................................... 5-1

5.2 Accelerator actuation............................................................................................................................ 5-1

5.3 Brakes .................................................................................................................................................. 5-6

5.4 Machine travel ...................................................................................................................................... 5-9

5.5 Differential lock ................................................................................................................................... 5-28

5.6 Lights/signaling system ...................................................................................................................... 5-28

5.7 Wiper/wash system ............................................................................................................................ 5-33

5.8 Heating, ventilation and air conditioning system................................................................................. 5-34

5.9 Operating hydraulics........................................................................................................................... 5-36

5.10 Attachments........................................................................................................................................ 5-75

5.11 Work operation ................................................................................................................................... 5-79

5.12 Emergency lowering ........................................................................................................................... 5-87

5.13 Options ............................................................................................................................................... 5-88

5.14 Putting out of operation/back into operation ....................................................................................... 5-91

5.15 Permanently putting out of operation.................................................................................................. 5-93

6 Transportation

6.1 Towing the machine ............................................................................................................................. 6-1

6.2 Loading the machine ............................................................................................................................ 6-7

6.3 Transporting the machine................................................................................................................... 6-12

Table of contents

I-2 OM E14 wheel us* 1.1 * E14w_us1_1IVZ.fm

Table of contents

7 Maintenance

7.1 Information on maintenance ................................................................................................................. 7-1

7.2 Maintenance overview .......................................................................................................................... 7-2

7.3 Fluids and lubricants........................................................................................................................... 7-21

7.4 Maintenance accesses ....................................................................................................................... 7-24

7.5 Cleaning and maintenance ................................................................................................................. 7-28

7.6 Lubrication work.................................................................................................................................. 7-31

7.7 Fuel system ........................................................................................................................................ 7-31

7.8 Engine lubrication system................................................................................................................... 7-38

7.9 Cooling system ................................................................................................................................... 7-41

7.10 Air filter................................................................................................................................................ 7-44

7.11 V-belt .................................................................................................................................................. 7-45

7.12 Hydraulic system ................................................................................................................................ 7-45

7.13 Electrical system................................................................................................................................. 7-49

7.14 Heating, ventilation and air conditioning system................................................................................. 7-50

7.15 Washer system ................................................................................................................................... 7-50

7.16 Axles/traveling drive............................................................................................................................ 7-50

7.17 Braking system ................................................................................................................................... 7-50

7.18 Tires.................................................................................................................................................... 7-51

7.19 Maintenance of attachments............................................................................................................... 7-55

7.20 Maintenance of options....................................................................................................................... 7-55

7.21 Exhaust gas treatment (option)........................................................................................................... 7-55

7.22 Machine preservation ......................................................................................................................... 7-64

8Malfunctions

8.1 Diesel engine ........................................................................................................................................ 8-1

8.2 Malfunctions (display element/multi-functional display)........................................................................ 8-3

9 Technical data

9.1 Models and trade names ...................................................................................................................... 9-1

9.2 Engine................................................................................................................................................... 9-1

9.3 Traveling drive ...................................................................................................................................... 9-2

9.4 Brakes................................................................................................................................................... 9-2

9.5 Tires...................................................................................................................................................... 9-2

9.6 Steering system .................................................................................................................................... 9-2

9.7 Operating hydraulics............................................................................................................................. 9-3

9.8 Electrical system................................................................................................................................... 9-4

9.9 Tightening torques ................................................................................................................................ 9-8

9.10 Coolant ............................................................................................................................................... 9-10

9.11 Noise emissions.................................................................................................................................. 9-10

9.12 Vibration.............................................................................................................................................. 9-11

9.13 Weights............................................................................................................................................... 9-15

9.14 Lift capacity/load ................................................................................................................................. 9-19

9.15 Dimensions ......................................................................................................................................... 9-46

Index

Index ..............................................................................................................................................................S-1

OM E14 wheel us* 1.1 * E14w_11_konf.fm EG-1

Declaration of conformity

Declaratio n of conformity

The indications specified above correspond to the existing information at time of going to press. They have

possibly changed in the meantime (refer to the original declaration of conformity supplied with the machine).

Applies to EU countries, and countries with legislation similar to that of the EU. Applies to all machines with CE

marks that have not been modified without authorization since the product was placed on the market.

Declaratio n of conformityDeclaratio n of conformity

Manufacturer

Wacker Neuson Linz GmbH, Flughafenstr. 7, 4063 Hörsching, Austria

Product

Declaration of conformity

Notified body according to Directive 2006/42/EC, appendix XI:

DGUV Test, Prüf- und Zertifizierungsstelle

Fachbereich Bauwesen, Landsberger Str. 309, 80687 Munich, Germany

EU identification number 0515

Notified body involved in procedure

TÜV SÜD Industrie Service GmbH

Westendstr. 199

D-80686 Munich

Directives and standards

We hereby declare that this product corresponds to the relevant regulations of the following Directives

and standards:

2006/42/EC, 2005/88/EC, 2000/14/EC;

DIN EN ISO 12100:2010, DIN EN 474-1:2006+A4:2013, DIN EN 474-5:2006+A3:2013,

DIN EN ISO 3471:2010, DIN EN ISO 3744:2010, DIN EN ISO 3449:2008;

Authorized representative for the compilation of technical documentation

Thomas Köck, team leader technical documentation

Flughafenstr. 7

4063 Hörsching

Austria

Machine designation Hydraulic excavator

Model/version E14-02 Tier III

Trade name EW65

Serial number --

Output in kW 36.2

Measured sound power level dB(A) 97

Guaranteed sound power level dB(A) 97

Johannes Mahringer,

Managing director

EC Declaration of Conformity

Declaration of conformity

EG-2 OM E14 wheel us* 1.1 * E14w_11_konf.fm

Declaration of conformity

The indications specified above correspond to the existing information at time of going to press. They have

possibly changed in the meantime (refer to the original declaration of conformity supplied with the machine).

Applies to EU countries, and countries with legislation similar to that of the EU. Applies to all machines with CE

marks that have not been modified without authorization since the product was placed on the market.

Declaration of conformity

Manufacturer

Wacker Neuson Linz GmbH, Flughafenstr. 7, 4063 Hörsching, Austria

Product

Declaration of conformity

Notified body according to Directive 2006/42/EC, appendix XI:

DGUV Test, Prüf- und Zertifizierungsstelle

Fachbereich Bauwesen, Landsberger Str. 309, 80687 Munich, Germany

EU identification number 0515

Notified body involved in procedure

TÜV SÜD Industrie Service GmbH

Westendstr. 199

D-80686 Munich

Directives and standards

We hereby declare that this product corresponds to the relevant regulations of the following Directives

and standards:

2006/42/EC, 2005/88/EC, 2000/14/EC;

DIN EN ISO 12100:2010, DIN EN 474-1:2006+A4:2013, DIN EN 474-5:2006+A3:2013,

DIN EN ISO 3471:2010, DIN EN ISO 3744:2010, DIN EN ISO 3449:2008;

Authorized representative for the compilation of technical documentation

Thomas Köck, team leader technical documentation

Flughafenstr. 7

4063 Hörsching

Austria

Machine designation Hydraulic excavator

Model/version E14-02 Tier IV

Trade name EW65

Serial number --

Output in kW 45,5 kW

Measured sound power level dB(A) 98

Guaranteed sound power level dB(A) 98

Johannes Mahringer,

Managing director

EC Declaration of Conformity

OM E14 wheel us* 1.1 * E14w_11_100.fm 1-1

Foreword 1

1 Foreword

1.1 Operator’s Manual

Information on this Operator’s Manual

The Operator’s Manual is stored in the compartment on the left side of the

seat.

A document box behind the seat is available as an option.

This Operator’s Manual contains important information on how to work

safely, correctly and economically with the machine. Therefore, it aims not

only at new personnel, but it also serves as a reference for experienced

personnel.

Furthermore, the reliability and the service life of the machine will be

increased by following the instructions in the Operator’s Manual. This is

why the Operator’s Manual must be kept at hand in the machine.

The operator must carefully read and understand the Operator’s Manual

before starting up, servicing or repairing the machine.

This Operator’s Manual will help to familiarize yourself more easily with

the machine, thereby enabling you to use it more safely and efficiently.

This Operator’s Manual does not include special superstructures.

Please contact your dealer if you require more information on the machine

or the Operator’s Manual.

Foreword

Table of contents

Index

1-2 OM E14 wheel us* 1.1 * E14w_11_100.fm

1 Foreword

Explanation of symbols and abbreviations

Explanation of symbols

• Identifies a list

- Identifies a subdivision of a list

➥ Description of a result

1. Identifies an activity

Follow the order of the activity!

2. Continuation of an activity

Follow the order of the activity!

A Identifies an alphabetical list

B Continuation of an alphabetical list

Cross references: see page 1-1 (page)

Cross references: 7 (pos. no. or table no.)

Cross references: Fig. 2 (Fig. no. 1)

Cross references: – see chapter "5 Operation" on page 5-1

(see chapter)

Cross references: – see "Operation" on page 5-1 (-see text)

Information

Identifies an information that, when followed, provides for a more efficient

and economical use of the machine.

Umwelt

Failure to observe the instructions identified by this symbol can cause

damage to the environment.

OM E14 wheel us* 1.1 * E14w_11_100.fm 1-3

Foreword 1

Abbreviations

Fig. = Figure

AUX = Additional control circuit

B=Width

o/h = Operating hours

approx. = approximately

DPF = Diesel particulate filter

FGPS = Front Guard Protective Structure

FOPS = Falling Objects Protective Structure

if nec. = if necessary

HSWS = Hydraulic quickhitch (for example Easy Lock)

max. = maximum

min. = minimum

MSWS = Mechanical quickhitch

NW = Nominal width

Pos. = Position

hp = Stabilizer blade

ROPS =

Roll Over Protective Structure (without losing contact with

the ground)

TOPS = Tip Over Protective Structure

e. g. = for example

1-4 OM E14 wheel us* 1.1 * E14w_11_100.fm

1 Foreword

Glossary

Attachment

All exchangeable equipment (for example buckets) released by Wacker Neu-

son and developed for work with the machine.

Working lights The lights on the roof, chassis and boom are referred to as working lights.

Towing

Tow the excavator out of the immediate danger zone (for example railroad

crossing or job site).

DOC

Diesel oxidation catalytic converter; removes carbon monoxide and residues

of unburned fuel from the exhaust fumes

DPF Diesel particulate filter; burns soot particles in the exhaust fumes

Operating company

A company (or person) operating the machine. This can be a job site operating

company, for example.

Operators Person performing machine travel or operation.

Machine

Unless otherwise specified, the term “machine” refers to the excavator

described in this Operator’s Manual. In some cases the machine is also

referred to as excavator to avoid confusion with other machines.

Machine operation

All work (for example machine travel, moving material, daily maintenance) an

operator is allowed to or has to perform in connection with the machine. The

term “machine operation” does not include maintenance only a Wacker

Neuson service center is allowed to perform.

Lift capacity table

The maximum weight which may be lifted in excavating operations. If the

upper carriage is rotated, pay attention to the values of the load diagrams.

Crawling speed Perform machine travel as slowly as possible and jerk free.

Hose rupture Hydraulic oil under pressure escapes from a hydraulic hose.

Check the threaded fittings for

tightness

• Operator: Visually check the screwed connections and corresponding

elements/sub-assemblies visually or manually (without using tools) for

tightness

• Wacker Neuson service center: if an attachment has to be used in the

event of abnormalities for the control procedures, restore the screwed

connection with new materials (screws, nuts)

Visual aids

Visual aids are, for example, rearview mirrors, cameras, but also persons

assisting the operator during machine operation.

OM E14 wheel us* 1.1 * E14w_11_100.fm 1-5

Foreword 1

Right/left/front/rear

These terms are used from the view of an operator in the cabin if the front

of the cabin faces toward the oscillating-axle cylinders A.

• 1: left

• 2: right

• 3: front

• 4: rear

Control lever base The foldable control lever base on the left.

Tier III/Tier IV

The machines comply with different exhaust-gas standards depending on

optional equipment. Engine variants are described separately if there are

engine-specific differences (for example regarding operation) – see chapter "

Model designations and trade names" on page 3-2.

Load diagram

Specifies the maximum load at a given boom extension with which the upper

carriage may be rotated by 360° and the excavator may travel in creep gear

with the stabilizer blade raised without tipping over.

Loading weight

The actual weight of the machine at the beginning of transportation. This

weight refers to machines which are equipped exclusively with options

approved by Wacker Neuson.

Additional control circuits

Additional control circuits required for certain attachments.

• AUX I: auxiliary hydraulics (for example for hydraulic hammer or offset

bucket)

• AUX II: 3. 3rd control circuit (for example for universal grab)

• AUX III: for example Powertilt

• AUX IV: Hydraulic quickhitch (for example Easy Lock)

• AUX V: oscillating grab

Image description

Symbolizes a full battery

Fig.1

4

21

3

A

1-6 OM E14 wheel us* 1.1 * E14w_11_100.fm

1 Foreword

Target-group definition

This Operator’s Manual is intended for professional construction site

personnel.

Any operator must have fully read and understood this Operator’s Manual

completely.

A dealer or person renting the machine must instruct the operator and

have this confirmed in writing.

Operator qualification and requirements for safe operation

Among other things, safe machine operation depends on the following

points:

• Machine model and its outfitting

• Machine maintenance

• Work and traveling speed

• Nature of ground and work environment

The most important points are the operator’s qualification and power of

judgment. A well-trained operator following the Operator’s Manual and

maintenance plan ensures a long service life and durability of the

machine.

Specific training enables the operator to acquire, among other things, the

following skills:

• Correct assessment of work situations

• Feeling for the machine

• Recognition of possible risk situations

• Safe working by making the correct decisions for man, machine and

the environment

The operator is at risk if the machine is not operated correctly.

Follow the operating procedures and instructions described for the

machine.

Access to the machine or machine operation is prohibited for children and

persons under the influence of alcohol, drugs, or medicine.

OM E14 wheel us* 1.1 * E14w_11_100.fm 1-7

Foreword 1

Conversion table

The rounded imperial values are indicated in brackets, for example 1060

cm³ (64.7 in³).

Volume unit

1 cm³ (0.061 in³)

1 m³ (35.31 ft³)

1 ml (0.034 US fl.oz.)

1 l (0.26 gal)

1 l/min (0.26 gal/min)

Unit of length

1 mm (0.039 in)

1 m (3.28 ft)

Weight

1 kg (2.2 lbs)

1 g (0.035 oz)

Pressure

1 bar (14.5 psi)

1 kg/cm² (14.22 lbs / in²)

Force/output

1 kN (224.81 lbf)

1 kW (1.34 hp)

1 PS (0.986 hp)

Torque

1 Nm (0.74 ft.lbs.)

Speed

1 kph (0.62 mph)

Acceleration

1 m/s² (3.28 ft/s²)

1-8 OM E14 wheel us* 1.1 * E14w_11_100.fm

1 Foreword

1.2 Warranty and liability

Exemption from warranty and liability

Warranty

Warranty claims can be made only if the conditions of warranty have been

observed. They are included in the General Conditions of Sales and

Delivery for new machines and spare parts sold by the dealers of Wacker

Neuson Linz GmbH. Furthermore, all instructions in this Operator’s

Manual must be observed.

Have the maintenance, delivery inspection and the entries in the service

booklet performed by a Wacker Neuson service center, otherwise

warranty claims will not be acknowledged.

Exemption from liability

• Modifying Wacker Neuson products and fitting them with additional

equipment and attachments that are not included in our delivery

program requires Wacker Neuson’s written authorization. otherwise

warranty and product liability for possible damage caused by these

modifications shall not be applicable.

• The safety of the machine can be negatively affected by performing

machine modifications without proper authority and by using spare

parts, equipment, attachments and optional equipment that have not

been checked and approved by Wacker Neuson. Warranty and

product liability for possible damage caused by these modifications

shall not be applicable.

• Wacker Neuson Linz GmbH shall not be liable for injury and/or

damage to property caused by failure to observe the safety instruc-

tions, warnings and the Operator’s Manual, and by the negligence of

the duty to exercise due care when:

- handling

-Operation

- servicing and performing maintenance and

- repairing the machine. This is also applicable in those cases in which

special attention has not been drawn to the duty to exercise due

care, in the safety instructions as well as in the Operator’s and

maintenance manuals.

- Read and understand the Operator’s Manual before starting up,

servicing or repairing the machine. Observe all safety instructions

and warnings.

OM E14 wheel us* 1.1 * E14w_11_200a.fm 2-1

Safety 2

2 Safety

2.1 Safety symbols and signal words

Explanation

The following symbol identifies safety instructions. It is used for warning

against potential personal risk or danger.

DANGER

DANGER identifies a situation causing death or serious injury if it is

not avoided.

Consequences in case of non-observance.

► Avoidance of injury or death.

WARNING

WARNING identifies a situation that can cause death or serious

injury if it is not avoided.

Consequences in case of non-observance.

► Avoidance of injury or death.

CAUTION

CAUTION identifies a situation that can cause injury if it is not

avoided.

Consequences in case of non-observance.

► Avoidance of injury.

NOTICE

NOTICE identifies a situation that causes damage to the machine if it is

not observed.

► Avoidance of damage to property.

Safety

2-2 OM E14 wheel us* 1.1 * E14w_11_200a.fm

2 Safety

2.2 Qualification of operating personnel

Owner’s duties

• Only allow specifically authorized, trained and experienced persons to

operate, travel and perform maintenance on the machine.

• Do not allow persons to be trained or instructed by anyone other than

an authorized and experienced person.

• Have persons to be trained or instructed practice under supervision

until they are familiar with the machine and its behavior (for example

with the steering and braking behavior).

• Access to the machine or machine operation is prohibited for children

and persons under the influence of alcohol, drugs or medicine.

• Clearly and unequivocally define the responsibilities of the operating

and maintenance personnel.

• Clearly and unequivocally define the responsibilities on the job site,

also in view of traffic regulations.

• Give the operator the authority to refuse instructions by other persons

that are contrary to safety.

• Have the machine serviced and repaired only by a Wacker Neuson

service center.

Required knowledge of operator

• The operator is responsible for other persons.

• Avoid any operational mode that might be prejudicial to safety.

• The specific national driving license is required.

• The machine may only be operated by authorized and safety-

conscious persons who are fully aware of the risks involved in

operating the machine.

• The operator and owner are obligated to operate the machine only in a

safe and working condition.

• All persons working on or with the machine must have read and under-

stood the safety instructions in this Operator’s Manual before starting

work.

• Follow, and instruct the operator in, legal and other mandatory regula-

tions relevant to accident prevention.

• Observe and instruct the operator in regulations regarding road traffic

and environmental protection.

• Use only the defined accesses for getting on and off the machine.

• Be familiar with the emergency exit of the machine.

Preparatory measures for the operator

• Before starting, check the machine whether it can be traveled and

operated safely.

• Tie back long hair and remove all jewelry.

• Wear close-fitting work clothes that do not hinder movement.

OM E14 wheel us* 1.1 * E14w_11_200a.fm 2-3

Safety 2

2.3 Conduct

Prerequisites for operation

• The machine has been designed and built in accordance with state-of-

the-art standards and the recognized safety regulations.

Nevertheless its use can cause danger to the operator or other

persons, or damage to the machine.

• Store this Operator’s Manual in the place provided for this in or on the

machine. Immediately replace a damaged or illegible Operator’s

Manual and any supplements to it.

• The machine must only be operated in accordance with its designated

use and the instructions set forth in this Operator’s Manual.

• The operator and owner are obligated not to put into operation or

operate a damaged or malfunctioning machine.

- If a damage or malfunction occurs during operation, put the machine

out of operation immediately and secure it against restart.

- Have all malfunctions jeopardizing the safety of the operator or other

persons immediately repaired by a Wacker Neuson service center.

• Do not put the machine into operation or operate it after an accident;

have it inspected for damage by a Wacker Neuson service center.

- Have the seat belt replaced by a Wacker Neuson service center after

an accident, even if there is no visible damage.

- Cabin and protective structures

• Remove all dirt, snow and ice from climbing aids (for example from the

handholds, footholds, handrails).

• The owner is responsible for requiring the operating and maintenance

personnel to wear protective clothing and equipment as required by the

circumstances.

2-4 OM E14 wheel us* 1.1 * E14w_11_200a.fm

2 Safety

2.4 Operation

Preparatory measures

• Operation is only allowed with correctly installed and intact protective

structures.

• Keep the machine clean. This reduces injury, accident and fire

hazards.

• Safely store objects you carry with you in the places provided for this

(for example in the storage compartment, drinks holder).

• Do not carry objects with you that protrude into the operator’s work

space. They can create another danger in case of an accident.

• Observe all safety, warning and information labels.

• Start and operate the machine only with the seat belt fastened and only

from the place provided for this.

• Check the condition and the fastening of the seat belt. Have malfunc-

tioning seat belts and mounting hardware replaced by a Wacker

Neuson service center.

• Before starting work, adjust the seating position so that all control

elements can be reached and fully operated.

• Perform the personal adjustment at machine standstill only (for

example of the operator seat, steering column).

• Ensure that all safety devices are properly installed and functional

before starting work.

• Before starting work or after interrupting work, ensure that the brake,

steering, signaling and light systems are functional.

• Before putting the machine into operation, ensure that nobody is in the

danger zone.

OM E14 wheel us* 1.1 * E14w_11_200a.fm 2-5

Safety 2

Job site

• The operator is responsible for other persons.

• Before starting work, familiarize yourself with the job site. This applies

to, for example:

- Obstacles in the job site and machine travel area

- Any barriers separating the job site from public roads

- Soil weight-bearing capacity

- Existing overhead and underground lines

- Special operating conditions (for example dust, steam, smoke,

asbestos)

• The operator must know the maximum dimensions of the machine and

the attachment – see “Technical data”.

• Maintain a safe distance (for example from buildings, edges of building

pits).

• During work in buildings or in enclosed areas, look out for:

- Height of the ceiling/clearances

- Width of entries/passages

- Maximum load of ceilings and floors

- Sufficient room ventilation (for example carbon monoxide poisoning

hazard)

• Use existing visual aids to stay aware of the danger zone.

• In conditions of darkness and poor visibility, switch on existing work

lights and ensure that motorists are not blinded by these lights.

• If the existing lights of the machine are not sufficient for performing

work safely, ensure additional lighting of the job site.

• Due to hot machine parts, maintain a safe distance from easily

flammable material (for example from hay, dry leaves).

Danger zone

• The danger zone is the area in which persons are at risk due to the

movements of the machine, attachment and/or load.

• The danger zone also includes the area that can be affected by falling

material, equipment or by parts that are thrown out.

• Extend the danger zone sufficiently in the immediate vicinity of

buildings, scaffolds or other elements of construction.

• Seal off the danger zone should it not be possible to keep a sufficient

safety distance.

• Stop machine operation immediately if persons do not stay clear of the

danger zone.

2-6 OM E14 wheel us* 1.1 * E14w_11_200a.fm

2 Safety

Carrying passengers

• Carrying passengers with the machine is PROHIBITED.

• Carrying passengers on/in attachments/tools is PROHIBITED.

• Carrying passengers on/in trailers is PROHIBITED.

Mechanical integrity

• The operator and owner are obligated to operate the machine only in a

safe and working condition.

• Operate the machine only if all protective and safety-oriented

equipment (for example protective structures such as a cabin or

rollbar, removable safety devices) is installed and functional.

• Check the machine for visible damage and defects.

• In case of damage and/or unusual behavior, put the machine out of

operation immediately and secure it against restart.

• Have all malfunctions jeopardizing the safety of the operator or other

persons immediately repaired by a Wacker Neuson service center.

Starting the engine of the machine

• Start the engine only according to the Operator’s Manual.

• Observe all warning and indicator lights.

• Do not use any liquid or gaseous starting aids (for example, ether or

starting fuel).

Machine operation

• Start and operate the machine only with the seat belt fastened and only

from the place provided for this.

• Put the machine into operation only if visibility is sufficient (have

another person guide you if necessary).

• Operation on slopes:

- Travel/work only uphill or downhill.

- Avoid machine travel across a slope, observe the machine’s permis-

sible inclination (and of the trailer if necessary).

- Keep loads on the uphill side of the machine and as close as

possible to it.

- Keep attachments/work equipment close to the ground.

• Adapt the travel speed to the circumstances (for example the ground

conditions, weather conditions).

• There is increased danger during backward machine travel. Persons in

the blind spot of the machine cannot be seen by the operator.

- Ensure that nobody is in the danger zone when you change the

travel direction.

• Never get on a moving machine and never jump off the machine.

La page est en cours de chargement...

Wacker Neuson EW65 Manuel utilisateur

Wacker Neuson EW65 Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents