Wacker Neuson EZ26 Manuel utilisateur

Taper
Manuel utilisateur
Operator’s manual
Tracked excavator
Machine model
Edition
Document order number
Language
From serial no.
E10-03
1.0
5100050529
en/fr
WNCE1003EPAL00160
This Operator's Manual includes
the AEM 3afety -anual #%
Copyright © 2018 Wacker Neuson Linz GmbH, Hörsching
Printed in Austria
All rights reserved, in particular the copyright, the right of reproduction and the right of distribution applicable
worldwide.
This document may be used by the receiver only for the designated purpose. It may in no way be duplicated or
translated in any other language, in whole or in part, without prior permission in writing from the manufacturer.
No reproduction or translation of this publication, in whole or in part, without the written consent from Wacker
Neuson Linz GmbH.
Violations of legal regulations, in particular of the copyright protection, will be subject to civil and criminal prosecution.
Wacker Neuson Linz GmbH keep abreast of the latest technical developments and constantly improve their
products. For this reason, we may from time to time need to make changes to figures and descriptions in this
documentation that do not reflect the products that have already been delivered and which will not be
implemented in these vehicles.
Technical data, dimensions and weights are only given as an indication. Non-metric values are rounded off.
Responsibility for errors or omissions not accepted.
The cover features the vehicle with possible optional equipment. Not all options in this operator's manual must be
available in every destination country.
Photographs and graphics are symbolic representations and may differ from the actual products.
Wacker Neuson is authorized to publish copyright-protected material, for example that owned by Perkins
Engines Company Ltd.
The Operator’s Manual and any amendments to it must always be available at the location where the vehicle is
operated. Possible amendments are included at the end of the Operator’s Manual.
Wacker Neuson Linz GmbH
Flughafenstr. 7
A-4063 Hörsching
Phone: +43 (0) 7221 63000
Fax: +43 (0) 7221 63000-2200
E-mail: office.linz@wackerneuson.com
www.wackerneuson.com
Documentation Language Order no.
Operator’s manual en/us 1000406869
Spare parts catalog EZ26
de/en/fr 1000404361
it/es/en 1000404362
Legend
Original Operator’s Manual x
Translation of original Operator’s Manual
Issue 1.0
Date 07/2018
Document BA EZ26 en/us*
BA EZ26 en/us* 1.0 * EZ26_en_us1_0IVZ.fm I-1
Table of contents
Table of contents
1Foreword
1.1 Operator’s manual ................................................................................................................................ 1-1
1.2 Warranty and liability ............................................................................................................................ 1-8
2 Safety
2.1 Safety symbols and signal words ......................................................................................................... 2-1
2.2 Qualification of operating personnel ..................................................................................................... 2-2
2.3 Conduct ................................................................................................................................................ 2-3
2.4 Operation.............................................................................................................................................. 2-4
2.5 Lifting gear applications........................................................................................................................ 2-8
2.6 Trailer operation ................................................................................................................................. 2-11
2.7 Attachment operation ......................................................................................................................... 2-11
2.8 Towing, loading and transporting ....................................................................................................... 2-13
2.9 Maintenance ....................................................................................................................................... 2-15
2.10 Measures for avoiding risks................................................................................................................ 2-18
3 Introduction
3.1 Machine overview................................................................................................................................. 3-1
3.2 Brief description of the vehicle.............................................................................................................. 3-2
3.3 Information and regulations on use ...................................................................................................... 3-5
3.4 Labels ................................................................................................................................................... 3-6
4 Putting into operation
4.1 Cab ....................................................................................................................................................... 4-1
4.2 Overview of control elements ............................................................................................................. 4-23
4.3 Control and warning lights overview................................................................................................... 4-28
4.4 Preparatory work ................................................................................................................................ 4-31
4.5 Starting and stopping the engine........................................................................................................ 4-36
5Operation
5.1 Steering system.................................................................................................................................... 5-1
5.2 Accelerator actuation............................................................................................................................ 5-2
5.3 Brake .................................................................................................................................................... 5-3
5.4 Machine travel ...................................................................................................................................... 5-4
5.5 Differential lock ..................................................................................................................................... 5-9
5.6 Lights/signaling system ...................................................................................................................... 5-10
5.7 Washer system................................................................................................................................... 5-13
5.8 Temperature setting ........................................................................................................................... 5-14
5.9 Operating hydraulics........................................................................................................................... 5-15
5.10 Additional control circuits.................................................................................................................... 5-25
5.11 Attachments...............................................................................................................
......................... 5-37
5.12 Work operation ................................................................................................................................... 5-42
5.13 Emergency lowering ........................................................................................................................... 5-57
5.14 Options ............................................................................................................................................... 5-58
5.15 Immobilization/putting back into operation.......................................................................................... 5-61
5.16 Permanently putting out of operation.................................................................................................. 5-63
6 Transportation
6.1 Towing the vehicle................................................................................................................................ 6-1
6.2 Loading the vehicle............................................................................................................................... 6-2
6.3 Transporting the vehicle ....................................................................................................................... 6-7
Table of contents
I-2 BA EZ26 en/us* 1.0 * EZ26_en_us1_0IVZ.fm
Table of contents
7 Maintenance
7.1 Information on maintenance ................................................................................................................. 7-1
7.2 Maintenance overview .......................................................................................................................... 7-2
7.3 Consumables...................................................................................................................................... 7-15
7.4 Maintenance accesses ....................................................................................................................... 7-18
7.5 Cleaning and maintenance ................................................................................................................. 7-20
7.6 Lubrication work.................................................................................................................................. 7-24
7.7 Fuel system ........................................................................................................................................ 7-24
7.8 Engine lubrication system................................................................................................................... 7-30
7.9 Cooling system ................................................................................................................................... 7-32
7.10 Air filter................................................................................................................................................ 7-35
7.11 V-belt .................................................................................................................................................. 7-36
7.12 Hydraulic system ................................................................................................................................ 7-37
7.13 Electrical system................................................................................................................................. 7-42
7.14 Heating, ventilation and air conditioning system................................................................................. 7-43
7.15 Washer system ................................................................................................................................... 7-43
7.16 Travel drive ......................................................................................................................................... 7-43
7.17 Braking system ................................................................................................................................... 7-43
7.18 Tracks ................................................................................................................................................. 7-44
7.19 Maintenance of attachments............................................................................................................... 7-47
7.20 Maintenance of options....................................................................................................................... 7-47
7.21 Exhaust gas treatment........................................................................................................................ 7-48
7.22 Machine preservation ......................................................................................................................... 7-48
8 Troubleshooting
8.1 Diesel engine malfunctions................................................................................................................... 8-1
8.2 Malfunctions.......................................................................................................................................... 8-1
8.3 Malfunctions of the hydraulic system.................................................................................................... 8-2
8.4 Malfunctions of attachments ................................................................................................................. 8-2
9 Technical data
9.1 Models and trade names ...................................................................................................................... 9-1
9.2 Engine................................................................................................................................................... 9-1
9.3 Traveling drive ...................................................................................................................................... 9-2
9.4 Brake .................................................................................................................................................... 9-2
9.5 Tracks .....................................................................................................................
.............................. 9-2
9.
6 Steering system .................................................................................................................................... 9-2
9.7 Work hydraulics .................................................................................................................................... 9-2
9.8 Electrical system................................................................................................................................... 9-3
9.9 Tightening torques ................................................................................................................................ 9-7
9.10 Coolant ................................................................................................................................................. 9-8
9.11 Noise emissions.................................................................................................................................... 9-8
9.12 Vibrations.............................................................................................................................................. 9-9
9.13 Weights............................................................................................................................................... 9-13
9.14 Lift capacity/load ................................................................................................................................. 9-17
9.15 Dimensions ......................................................................................................................................... 9-30
Index
BA EZ26 en/us* 1.0 * EZ26_01_konf.fm EG-1
Declaration of conformity
Declaration of conformity
The indications specified above correspond to the existing information at time of going to press. They have
possibly changed in the meantime (refer to the original declaration of conformity supplied with the vehicle).
Applies to EU countries, and countries with legislation similar to that of the EU. Applies to all vehicles with CE
marks that have not been modified without authorization since the product was placed on the market.
Manufacturer
Wacker Neuson Linz GmbH, Flughafenstr. 7, 4063 Hörsching, Austria
Product
Declaration of conformity
Notified body according to Directive 2006/42/EC, appendix XI:
DGUV Test, test and certification body
construction department, Landsberger Str. 309, 80687 Munich, Germany
EU identification number 0515
Notified body involved in procedure
TÜV SÜD Industrie Service GmbH
Westendstr. 199
D-80686 Munich
Directives and standards
We hereby declare that this product corresponds to the relevant regulations of the following Directives
and standards:
2006/42/EC, 2005/88/EC, 2000/14/EC - Appendix VIII;
DIN EN ISO 12100-1, DIN EN ISO 12100-2, DIN EN 474-1 and DIN EN 474-3 (except for 5.4),
DIN 3471, EN ISO 3744, DIN EN ISO 3449
Authorized representative for the compilation of technical documentation
Annette Ortmayr, team leader Technical Documentation
Flughafenstr. 7
4063 Hörsching
Austria
Machine designation Hydraulic excavator
Machine model E10-03
Trade name EZ26
Serial number --
Engine / output kW 3TNV76-NNS/15.8
Measured sound power level dB (A) 93
Guaranteed sound power level dB (A) 93
Johannes Mahringer,
Managing director
EC Compliance Statement
Declaration of conformity
EG-2 BA EZ26 en/us* 1.0 * EZ26_01_konf.fm
Declaration of conformity
Notes:
Declaration of conformity
BA EZ26 en/us* 1.0 * EZ26_01_100.fm 1-1
Foreword 1
1 Foreword
1.1 Operator’s manual
Information on this Operator’s Manual
The operator’s manual is stored in the compartment under the seat.
A document box behind the seat is available as an option.
This operator’s manual contains important information on how to work
safely, correctly and economically with the vehicle. Therefore, it aims not
only at new personnel, but it also serves as a reference for experienced
personnel.
Furthermore, the reliability and the service life of the vehicle will be
increased by following the instructions in the Operator’s Manual. This is
why the Operator’s Manual must be kept at hand in the vehicle.
The operator must carefully read and understand the Operator’s Manual
before starting up, servicing or repairing the vehicle.
This Operator’s Manual will help to familiarize yourself more easily with
the vehicle, thereby enabling you to use it more safely and efficiently.
This Operator’s Manual does not include special superstructures.
Please contact your dealer if you require more information on the vehicle
or the Operator’s Manual.
Foreword
of contents
Index
1-2 BA EZ26 en/us* 1.0 * EZ26_01_100.fm
1 Foreword
Explanation of symbols and abbreviations
Explanation of symbols
Identifies a list
- Identifies a subdivision of a list
Description of a result
1. Identifies an activity
Follow the order of the activity!
2. Continuation of an activity
Follow the order of the activity!
A Identifies an alphabetical list
B Continuation of an alphabetical list
Cross references: see page 1-1 (page)
Cross references: 7 (pos. no. or table no.)
Cross-references: Fig. 2 (Fig. no. 1
Cross references: – see chapter “5 Operation” on page 5-1
(see chapter)
Cross references: – see "Operation" on page 5-1 (-see text)
Information
Identifies an information that, when followed, provides for a more efficient
and economical use of the vehicle.
Environment
Failure to observe the instructions identified by this symbol can cause
damage to the environment.
BA EZ26 en/us* 1.0 * EZ26_01_100.fm 1-3
Foreword 1
Abbreviations
Fig. = Figure
AUX = Additional control circuit
B=Width
o/h = Operating hours
approx. = approximately
DPF = Diesel particulate filter
FGPS = Front Guard Protective Structure
FOPS = Falling Objects Protective Structure
if nec. = if necessary
Hydrau-
lic quick-
hitch
= Hydraulic quickhitch (for example Easy Lock)
max. = maximum
min. = minimum
MSWS = Mechanical quickhitch
Item = Position
hp = Stabilizer blade
ROPS =
Roll Over Protective Structure (without losing contact with
the ground)
TOPS = Tip Over Protective Structure
e. g. = for example
1-4 BA EZ26 en/us* 1.0 * EZ26_01_100.fm
1 Foreword
Glossary
Attachment
All exchangeable equipment (for example buckets) released by Wacker Neu-
son and developed for work with the vehicle.
Working lights The lights on the roof, chassis and boom are referred to as working lights.
Towing
The excavator is towed out of an immediate danger zone (railroad crossing or
job site, for example).
Canopy Open safety component for the operator
Operating company/person
A company (or person) operating the vehicle. This can be a job site operating
company, for example.
Operator Person performing vehicle travel or operation.
vehicle
Unless otherwise specified, the term "machine" refers to the excavator
described in this Operator’s Manual. In some cases the vehicle is also referred
to as excavator to avoid confusion with other vehicles.
Machine operation
All work (for example vehicle travel, moving material, daily maintenance work)
an operator is allowed to do or has to perform in connection with the vehicle.
The term “vehicle operation” does not include maintenance only a Wacker
Neuson service center is allowed to perform.
Lift capacity table
The maximum weight which may be lifted in excavating operations. If the
upper carriage is rotated, pay attention to the values of the load diagrams.
Cab
Closed safety component for the operator. The term cab is used in this opera-
tor's manual for canopy and cab. If there are differences, these two safety
components are described separately.
Crawling speed Perform vehicle travel as slowly as possible and jerk free.
Hose rupture Hydraulic oil under pressure escapes from a hydraulic hose.
Check the threaded fittings for
tightness
Operator: visually check the screw connections and corresponding compo-
nents/sub-assemblies visually or manually (without using tools) for
tightness
Authorized service center: if an attachment has to be used in the event of
abnormalities for the control procedures, restore the screwed connection
with new materials (screws, nuts)
Visual aids
Visual aids are, for example, rearview mirrors, cameras, but also persons
assisting the operator during vehicle operation.
Control lever base The foldable control lever base on the left.
BA EZ26 en/us* 1.0 * EZ26_01_100.fm 1-5
Foreword 1
Right/left/front/rear
These terms are used from the view of an operator in the cabin if the front
of the cabin faces toward the dozer blade A.
1: left
2: right
3: front
4: rear
Tier III/Tier IV
The vehicles comply with different exhaust-gas standards depending on
optional equipment. Engine variants are described separately if there are
engine-specific differences (for example regarding operation).
Load diagram
Specifies the maximum load at a given boom extension with which the upper
carriage may be rotated by 360° and the excavator may travel in creep gear
with the stabilizer blade raised without tipping over.
Loading weight
The actual weight of the vehicle at the beginning of transportation. This weight
refers to vehicles which are equipped exclusively with options approved by
Wacker Neuson.
Additional control circuits
Additional control circuits required for certain attachments.
AUX I: auxiliary hydraulics (for example for hydraulic hammer or offset
bucket)
AUX II: 3rd control circuit (for example for universal grab)
AUX III: for example Powertilt
AUX IV: hydraulic quickhitch (for example Easy Lock)
AUX V: oscillating grab
Fig. 1
4
21
3
A
1-6 BA EZ26 en/us* 1.0 * EZ26_01_100.fm
1 Foreword
Target-group definition
This Operator’s Manual is intended for professional construction site
personnel.
Any operator must have fully read and understood this Operator’s Manual
completely.
A dealer or person renting the vehicle must instruct the operator and have
this confirmed in writing.
Operator qualification and requirements for safe operation
Among other things, safe vehicle operation depends on the following
points:
Machine model and its outfitting
Machine maintenance
Work and driving speed
Nature of ground and work environment
The most important points are the operator’s qualification and power of
judgment. A well-trained operator following the operator’s manual and
maintenance plan ensures a long service life and durability of the vehicle.
Specific training enables the operator to acquire, among other things, the
following skills:
Correct assessment of work situations
Feeling for the vehicle
Recognition of possible risk situations
Safe working by making the correct decisions for man, vehicle and the
environment
The operator is at risk if the vehicle is not operated correctly.
Follow the operating procedures and instructions described for the
vehicle.
Access to the vehicle or vehicle operation is prohibited for children and
persons under the influence of alcohol, drugs, or medicine.
BA EZ26 en/us* 1.0 * EZ26_01_100.fm 1-7
Foreword 1
Conversion table
The rounded imperial values are indicated in brackets, for example 1060
cm³ (64.7 in³).
Volume unit
1 cm³ (0.061 in³)
1 m³ (35.31 ft³)
1 ml (0.034 US fl.oz.)
1 l (0.26 gal)
1 l/min (0.26 gal/min)
Unit of length
1 mm (0.039 in)
1 m (3.28 ft)
Weight
1 kg (2.2 lbs)
1 g (0.035 oz)
Pressure
1 bar (14.5 psi)
1 kg/cm² (14.22 lbs/in²)
Force/output
1 kN (224.81 lbf)
1 kW (1.34 hp)
1 PS (0.986 hp)
Torque
1 Nm (0.74 ft.lbs.)
Speed
1 kph (0.62 mph)
Acceleration
1 m/s² (3.28 ft/s²)
1-8 BA EZ26 en/us* 1.0 * EZ26_01_100.fm
1 Foreword
1.2 Warranty and liability
Exemption from warranty and liability
Warranty
Warranty claims can be made only if the conditions of warranty have been
observed. They are included in the General Conditions of Sales and
Delivery for new vehicles and spare parts sold by the dealers of Wacker
Neuson Linz GmbH. Furthermore, all instructions in this Operator’s
Manual must be observed.
Have the maintenance, delivery inspection and the entries in the service
booklet performed by a Wacker Neuson service center, otherwise
warranty claims will not be acknowledged.
Exemption from liability
Modifying Wacker Neuson products and fitting them with additional
equipment and attachments that are not included in our delivery
program requires Wacker Neuson’s written authorization, otherwise
warranty and product liability for possible damage caused by these
modifications shall not be applicable.
The safety of the vehicle can be negatively affected by performing
vehicle modifications without proper authority and by using spare
parts, equipment, attachments and optional equipment that have not
been checked and released by Wacker Neuson. Warranty and product
liability for possible damage caused by these modifications shall not be
applicable.
Wacker Neuson Linz GmbH shall not be liable for injury and/or
damage to property caused by failure to observe the safety instruc-
tions, warnings and the Operator’s Manual, and by the negligence of
the duty to exercise due care when:
- handling
-Operating
- servicing and performing maintenance
- repairing the vehicle. This is also applicable in those cases in which
special attention has not been drawn to the duty to exercise due
care, in the safety instructions as well as in the Operator’s and
maintenance manuals.
- Read and understand the Operator’s Manual before starting up,
servicing or repairing the vehicle. Observe all safety instructions and
warnings.
BA EZ26 en/us* 1.0 * EZ26_01_200b.fm 2-1
Safety 2
2 Safety
2.1 Safety symbols and signal words
Explanation
The following symbol identifies safety instructions. It is used for warning
against potential personal risk or danger.
DANGER
DANGER identifies a situation causing death or serious injury if it is
not avoided.
Consequences in case of non-observance.
Avoidance of injury or death.
WARNING
WARNING identifies a situation that can cause death or serious
injury if it is not avoided.
Consequences in case of non-observance.
Avoidance of injury or death.
CAUTION
CAUTION identifies a situation that can cause injury if it is not
avoided.
Consequences in case of non-observance.
Avoidance of injury.
NOTICE
NOTICE identifies a situation that causes damage to the vehicle if it is not
observed.
Avoidance of damage to property.
Safety
2-2 BA EZ26 en/us* 1.0 * EZ26_01_200b.fm
2 Safety
2.2 Qualification of operating personnel
Owner’s duties
Only allow specifically authorized, trained and experienced persons to
operate, drive and perform maintenance on the vehicle.
Do not allow persons to be trained or instructed by anyone other than
an authorized and experienced person.
Have persons to be trained or instructed practice under supervision
until they are familiar with the machine and its behavior (for example
with the steering and braking behavior).
Access to the vehicle or vehicle operation is prohibited for children and
persons under the influence of alcohol, drugs or medicine.
Clearly and unequivocally define the responsibilities of the operating
and maintenance personnel.
Clearly and unequivocally define the responsibilities on the job site,
also in view of traffic regulations.
Give the operator the authority to refuse safety instructions from third
parties.
Have the vehicle serviced and repaired only by an authorized service
center.
Required knowledge of the operator
The operator is responsible for third parties.
Avoid any operational mode that might be prejudicial to safety.
The specific national driving license is required.
The vehicle may only be operated by authorized and safety-conscious
persons who are fully aware of the risks involved in operating the
vehicle.
The operator and owner are obligated to operate the vehicle only in a
safe and working condition.
All persons working on or with the vehicle must have read and under-
stood the safety instructions in this Operator’s Manual before starting
work.
Follow, and instruct the operator in, legal and other mandatory regula-
tions relevant to accident prevention.
Observe and instruct the operator in regulations regarding road traffic
and environmental protection.
Use only the defined accesses for getting on and off the vehicle.
Be familiar with the emergency exit of the vehicle.
BA EZ26 en/us* 1.0 * EZ26_01_200b.fm 2-3
Safety 2
Preparatory measures for the operator
Before starting, check the vehicle whether it can be driven and
operated safely.
Tie back long hair and remove all jewelry.
Wear close-fitting work clothes that do not hinder movement.
2.3 Conduct
Prerequisites for operation
The vehicle has been designed and built in accordance with state-of-
the-art standards and the recognized safety regulations.
Nevertheless its use can cause danger to the operator or third parties,
or damage to the vehicle.
Store this Operator’s Manual in the place provided for this in or on the
vehicle. Immediately replace a damaged or illegible Operator’s Manual
and any supplements to it.
The vehicle must only be operated in accordance with its designated
use and the instructions set forth in this Operator’s Manual.
The operator and owner are obligated not to put a damaged or
malfunctioning vehicle into operation or operate it.
- If a damage or malfunction occurs during operation, put the vehicle
out of operation immediately and secure it against restart.
- Have all malfunctions jeopardizing the safety of the operator or third
parties immediately repaired by an authorized service center.
Do not put the vehicle into operation or operate it after an accident;
have it inspected for damage by an authorized service center.
- Have the seat belt replaced by an authorized service center after an
accident, even if there is no visible damage.
- Cabin and protective structures
Remove all dirt, snow and ice from climbing aids (for example from the
handholds, footholds, handrails).
The owner is responsible for requiring the operating and maintenance
personnel to wear protective clothing and equipment as required by the
circumstances.
2-4 BA EZ26 en/us* 1.0 * EZ26_01_200b.fm
2 Safety
2.4 Operation
Preparatory measures
Operation is only allowed with correctly installed and intact protective
structures.
Keep the vehicle clean. This reduces injury, accident and fire hazards.
Safely store objects you carry with you in the places provided for this
(for example in the storage compartment, drinks holder).
Do not carry objects with you that protrude into the user’s work space.
They can create another danger in case of an accident.
Observe all safety, warning and information labels.
Start and operate the vehicle only with the seat belt fastened and only
from the place provided for this.
Check the condition and the fastening of the seat belt. Have malfunc-
tioning seat belts and mounting hardware replaced by an authorized
service center.
Before starting work, adjust the seating position so that all control
elements can be reached and fully operated.
Only make personal settings when the vehicle is at a standstill (e.g.
seat, steering column).
Ensure that all safety devices are properly installed and functional
before starting work.
Before starting work or after interrupting work, ensure that the brake,
steering, signaling and light systems are functional.
Before putting the vehicle into operation, ensure that nobody is in the
danger zone.
BA EZ26 en/us* 1.0 * EZ26_01_200b.fm 2-5
Safety 2
Job site
The operator is responsible for third parties.
Before starting work, familiarize yourself with the job site. This applies
to, for example:
- Obstacles in the job site and vehicle travel area
- Any barriers separating the job site from public roads
- Soil weight-bearing capacity
- Existing overhead and underground lines
- Special operating conditions (for example dust, steam, smoke,
asbestos)
The operator must know the maximum dimensions of the vehicle and
the attachment – see “Technical data”.
Maintain a safe distance (for example from buildings, edges of building
pits).
During work in buildings or in enclosed areas, look out for:
- Height of the ceiling/clearances
- Width of entries/passages
- Maximum load of ceilings and floors
- Sufficient room ventilation (for example risk of carbon monoxide
poisoning)
Use existing visual aids to stay aware of the danger zone.
In conditions of darkness and poor visibility, switch on existing work
lights and ensure that motorists are not blinded by these lights.
If the existing lights of the vehicle are not sufficient for performing work
safely, ensure additional lighting of the job site.
Due to hot vehicle parts, maintain a safe distance from easily
flammable material (for example from hay, dry leaves).
Danger zone
The danger zone is the area in which persons are in danger due to the
movements of the vehicle, attachment and/or load.
The danger zone also includes the area that can be affected by falling
material, equipment or by parts that are thrown out.
Extend the danger zone sufficiently in the immediate vicinity of
buildings, scaffolds or other elements of construction.
Seal off the danger zone should it not be possible to keep a sufficient
safety distance.
Stop vehicle operation immediately if persons do not stay clear of the
danger zone.
2-6 BA EZ26 en/us* 1.0 * EZ26_01_200b.fm
2 Safety
Carrying passengers
Carrying passengers with the vehicle is PROHIBITED.
Carrying passengers on/in attachments/tools is PROHIBITED.
Carrying passengers on/in trailers is PROHIBITED.
Mechanical integrity
The operator and owner are obligated to operate the vehicle only in a
safe and working condition.
Operate the machine only if all protective and safety-oriented
equipment (for example protective structures such as a cabin or
rollbar, removable safety devices) is installed and functional.
Check the vehicle for visible damage and defects.
In case of damage and/or unusual behavior, put the vehicle out of
operation immediately and secure it against restart.
Have all malfunctions jeopardizing the safety of the operator or third
parties immediately repaired by an authorized service center.
Starting the engine of the vehicle
Start the engine only according to the Operator’s Manual.
Observe all warning and indicator lights.
Do not use any liquid or gaseous starting aids (for example ether or
starting fuel).
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95
  • Page 96 96
  • Page 97 97
  • Page 98 98
  • Page 99 99
  • Page 100 100
  • Page 101 101
  • Page 102 102
  • Page 103 103
  • Page 104 104
  • Page 105 105
  • Page 106 106
  • Page 107 107
  • Page 108 108
  • Page 109 109
  • Page 110 110
  • Page 111 111
  • Page 112 112
  • Page 113 113
  • Page 114 114
  • Page 115 115
  • Page 116 116
  • Page 117 117
  • Page 118 118
  • Page 119 119
  • Page 120 120
  • Page 121 121
  • Page 122 122
  • Page 123 123
  • Page 124 124
  • Page 125 125
  • Page 126 126
  • Page 127 127
  • Page 128 128
  • Page 129 129
  • Page 130 130
  • Page 131 131
  • Page 132 132
  • Page 133 133
  • Page 134 134
  • Page 135 135
  • Page 136 136
  • Page 137 137
  • Page 138 138
  • Page 139 139
  • Page 140 140
  • Page 141 141
  • Page 142 142
  • Page 143 143
  • Page 144 144
  • Page 145 145
  • Page 146 146
  • Page 147 147
  • Page 148 148
  • Page 149 149
  • Page 150 150
  • Page 151 151
  • Page 152 152
  • Page 153 153
  • Page 154 154
  • Page 155 155
  • Page 156 156
  • Page 157 157
  • Page 158 158
  • Page 159 159
  • Page 160 160
  • Page 161 161
  • Page 162 162
  • Page 163 163
  • Page 164 164
  • Page 165 165
  • Page 166 166
  • Page 167 167
  • Page 168 168
  • Page 169 169
  • Page 170 170
  • Page 171 171
  • Page 172 172
  • Page 173 173
  • Page 174 174
  • Page 175 175
  • Page 176 176
  • Page 177 177
  • Page 178 178
  • Page 179 179
  • Page 180 180
  • Page 181 181
  • Page 182 182
  • Page 183 183
  • Page 184 184
  • Page 185 185
  • Page 186 186
  • Page 187 187
  • Page 188 188
  • Page 189 189
  • Page 190 190
  • Page 191 191
  • Page 192 192
  • Page 193 193
  • Page 194 194
  • Page 195 195
  • Page 196 196
  • Page 197 197
  • Page 198 198
  • Page 199 199
  • Page 200 200
  • Page 201 201
  • Page 202 202
  • Page 203 203
  • Page 204 204
  • Page 205 205
  • Page 206 206
  • Page 207 207
  • Page 208 208
  • Page 209 209
  • Page 210 210
  • Page 211 211
  • Page 212 212
  • Page 213 213
  • Page 214 214
  • Page 215 215
  • Page 216 216
  • Page 217 217
  • Page 218 218
  • Page 219 219
  • Page 220 220
  • Page 221 221
  • Page 222 222
  • Page 223 223
  • Page 224 224
  • Page 225 225
  • Page 226 226
  • Page 227 227
  • Page 228 228
  • Page 229 229
  • Page 230 230
  • Page 231 231
  • Page 232 232
  • Page 233 233
  • Page 234 234
  • Page 235 235
  • Page 236 236
  • Page 237 237
  • Page 238 238
  • Page 239 239
  • Page 240 240
  • Page 241 241
  • Page 242 242
  • Page 243 243
  • Page 244 244
  • Page 245 245
  • Page 246 246
  • Page 247 247
  • Page 248 248
  • Page 249 249
  • Page 250 250
  • Page 251 251
  • Page 252 252
  • Page 253 253
  • Page 254 254
  • Page 255 255
  • Page 256 256
  • Page 257 257
  • Page 258 258
  • Page 259 259
  • Page 260 260
  • Page 261 261
  • Page 262 262
  • Page 263 263
  • Page 264 264
  • Page 265 265
  • Page 266 266
  • Page 267 267
  • Page 268 268
  • Page 269 269
  • Page 270 270
  • Page 271 271
  • Page 272 272
  • Page 273 273
  • Page 274 274
  • Page 275 275
  • Page 276 276
  • Page 277 277
  • Page 278 278
  • Page 279 279
  • Page 280 280
  • Page 281 281
  • Page 282 282
  • Page 283 283
  • Page 284 284
  • Page 285 285
  • Page 286 286
  • Page 287 287
  • Page 288 288
  • Page 289 289
  • Page 290 290
  • Page 291 291
  • Page 292 292
  • Page 293 293
  • Page 294 294
  • Page 295 295
  • Page 296 296
  • Page 297 297
  • Page 298 298
  • Page 299 299
  • Page 300 300
  • Page 301 301
  • Page 302 302
  • Page 303 303
  • Page 304 304
  • Page 305 305
  • Page 306 306
  • Page 307 307
  • Page 308 308
  • Page 309 309
  • Page 310 310
  • Page 311 311
  • Page 312 312
  • Page 313 313
  • Page 314 314
  • Page 315 315
  • Page 316 316
  • Page 317 317
  • Page 318 318
  • Page 319 319
  • Page 320 320
  • Page 321 321
  • Page 322 322
  • Page 323 323
  • Page 324 324
  • Page 325 325
  • Page 326 326
  • Page 327 327
  • Page 328 328
  • Page 329 329
  • Page 330 330
  • Page 331 331
  • Page 332 332
  • Page 333 333
  • Page 334 334
  • Page 335 335
  • Page 336 336
  • Page 337 337
  • Page 338 338
  • Page 339 339
  • Page 340 340
  • Page 341 341
  • Page 342 342
  • Page 343 343
  • Page 344 344
  • Page 345 345
  • Page 346 346
  • Page 347 347
  • Page 348 348
  • Page 349 349
  • Page 350 350
  • Page 351 351
  • Page 352 352
  • Page 353 353
  • Page 354 354
  • Page 355 355
  • Page 356 356
  • Page 357 357
  • Page 358 358
  • Page 359 359
  • Page 360 360
  • Page 361 361
  • Page 362 362
  • Page 363 363
  • Page 364 364
  • Page 365 365
  • Page 366 366
  • Page 367 367
  • Page 368 368
  • Page 369 369
  • Page 370 370
  • Page 371 371
  • Page 372 372
  • Page 373 373
  • Page 374 374
  • Page 375 375
  • Page 376 376
  • Page 377 377
  • Page 378 378
  • Page 379 379
  • Page 380 380
  • Page 381 381
  • Page 382 382
  • Page 383 383
  • Page 384 384
  • Page 385 385
  • Page 386 386
  • Page 387 387
  • Page 388 388
  • Page 389 389
  • Page 390 390
  • Page 391 391
  • Page 392 392
  • Page 393 393
  • Page 394 394
  • Page 395 395
  • Page 396 396
  • Page 397 397
  • Page 398 398
  • Page 399 399
  • Page 400 400
  • Page 401 401
  • Page 402 402
  • Page 403 403
  • Page 404 404
  • Page 405 405
  • Page 406 406
  • Page 407 407
  • Page 408 408
  • Page 409 409
  • Page 410 410
  • Page 411 411
  • Page 412 412
  • Page 413 413
  • Page 414 414
  • Page 415 415
  • Page 416 416
  • Page 417 417
  • Page 418 418
  • Page 419 419
  • Page 420 420
  • Page 421 421
  • Page 422 422
  • Page 423 423
  • Page 424 424
  • Page 425 425
  • Page 426 426
  • Page 427 427
  • Page 428 428
  • Page 429 429
  • Page 430 430
  • Page 431 431
  • Page 432 432
  • Page 433 433
  • Page 434 434
  • Page 435 435
  • Page 436 436
  • Page 437 437
  • Page 438 438
  • Page 439 439
  • Page 440 440
  • Page 441 441
  • Page 442 442
  • Page 443 443
  • Page 444 444
  • Page 445 445
  • Page 446 446
  • Page 447 447
  • Page 448 448
  • Page 449 449
  • Page 450 450
  • Page 451 451
  • Page 452 452
  • Page 453 453
  • Page 454 454
  • Page 455 455
  • Page 456 456
  • Page 457 457
  • Page 458 458
  • Page 459 459
  • Page 460 460
  • Page 461 461
  • Page 462 462
  • Page 463 463
  • Page 464 464
  • Page 465 465
  • Page 466 466
  • Page 467 467
  • Page 468 468
  • Page 469 469
  • Page 470 470
  • Page 471 471
  • Page 472 472
  • Page 473 473
  • Page 474 474
  • Page 475 475
  • Page 476 476
  • Page 477 477
  • Page 478 478
  • Page 479 479
  • Page 480 480
  • Page 481 481
  • Page 482 482
  • Page 483 483
  • Page 484 484
  • Page 485 485
  • Page 486 486
  • Page 487 487
  • Page 488 488
  • Page 489 489
  • Page 490 490
  • Page 491 491
  • Page 492 492
  • Page 493 493
  • Page 494 494
  • Page 495 495
  • Page 496 496
  • Page 497 497
  • Page 498 498
  • Page 499 499
  • Page 500 500
  • Page 501 501
  • Page 502 502
  • Page 503 503
  • Page 504 504
  • Page 505 505
  • Page 506 506
  • Page 507 507
  • Page 508 508
  • Page 509 509
  • Page 510 510
  • Page 511 511
  • Page 512 512
  • Page 513 513
  • Page 514 514
  • Page 515 515
  • Page 516 516
  • Page 517 517
  • Page 518 518
  • Page 519 519
  • Page 520 520
  • Page 521 521
  • Page 522 522
  • Page 523 523
  • Page 524 524
  • Page 525 525
  • Page 526 526
  • Page 527 527
  • Page 528 528
  • Page 529 529
  • Page 530 530
  • Page 531 531
  • Page 532 532
  • Page 533 533
  • Page 534 534
  • Page 535 535
  • Page 536 536
  • Page 537 537
  • Page 538 538
  • Page 539 539
  • Page 540 540
  • Page 541 541
  • Page 542 542
  • Page 543 543
  • Page 544 544
  • Page 545 545
  • Page 546 546
  • Page 547 547
  • Page 548 548
  • Page 549 549
  • Page 550 550
  • Page 551 551
  • Page 552 552
  • Page 553 553
  • Page 554 554
  • Page 555 555
  • Page 556 556
  • Page 557 557
  • Page 558 558
  • Page 559 559
  • Page 560 560
  • Page 561 561
  • Page 562 562
  • Page 563 563
  • Page 564 564
  • Page 565 565
  • Page 566 566
  • Page 567 567
  • Page 568 568
  • Page 569 569
  • Page 570 570

Wacker Neuson EZ26 Manuel utilisateur

Taper
Manuel utilisateur

dans d''autres langues