Wacker Neuson EW100 Manuel utilisateur

Mobile Excavator

EW 100

OPERATOR'S MANUAL

520005 1.0

0414

www.wackerneuson.com

5200022585

Documentations Language Order no.

Operator's Manual us 5200019750

Spare parts list EW100 (E06-06)

de/en/fr 1000315167

de/it/es 1000315168

Legend

Original Operator‘s Manual -

Translation of original Operator‘s Manual x

Edition (issued) 1.0 (04/2014)

Document OM EW100 us

Printed in Michigan, USA

No part of this publication may be reproduced, translated or used in any form or by any means – graphic, electronic

or mechanical including photocopying, recording, taping or information storage or retrieval systems – without prior

permission in writing from the manufacturer.

No reproduction or translation of this publication, in whole or part, without the written consent of Wacker Neuson

Linz GmbH.

Violations of legal regulations, in particular of the copyright protection, will be subject to civil and criminal prosecu-

tion.

Wacker Neuson Linz GmbH keep abreast of the latest technical developments and constantly improve their prod-

ucts. For this reason, we may from time to time need to make changes to diagrams and descriptions in this docu-

mentation which do not reflect products which have already been delivered and which will not be implemented on

these machines.

Technical data, dimensions and weights are given as an indication only. Responsibility for errors or omissions not

accepted.

Non-metric weights and measurements are approximate.

The cover features the machine with possible optional equipment.

Wacker Neuson is authorized to reprint the copyright-protected material of Perkins Engines Company Ltd

contained in this document.

Photographs and graphics are symbolic representations and may differ from the actual products

Wacker Neuson Linz GmbH

Flughafenstraße 7

A-4063 Hörsching

Document: OM EW100 us

OM EW100 us 1.0 *ew100us1_0IVZ.fm I-1

Table of Contents

1Foreword

1.1 Operator’s Manual................................................................................................................................ 1-1

1.2 Warranty and liability ............................................................................................................................ 1-5

2 Safety Information

2.1 Safety Symbols Found In This Manual................................................................................................. 2-1

2.2 Warranty............................................................................................................................................... 2-2

2.3 Disposal................................................................................................................................................ 2-2

2.4 Designated Use.................................................................................................................................... 2-2

2.5 Preparing To Use The Machine............................................................................................................ 2-3

2.6 Operator and Technician Qualifications and Basic Responsibilities..................................................... 2-4

2.7 Safety Instructions Regarding Operation.............................................................................................. 2-5

2.8 Special Instructions for Traveling on Public Roads .............................................................................. 2-8

2.9 Operator Protection System ................................................................................................................. 2-8

2.10 Applications with Lifting Gear ............................................................................................................... 2-9

2.11 Attachments........................................................................................................................................ 2-11

2.12 Trailers................................................................................................................................................ 2-12

2.13 Hammer operation.............................................................................................................................. 2-12

2.14 Transport and Towing......................................................................................................................... 2-13

2.15 Safety Guidelines for Maintenance..................................................................................................... 2-14

2.16 Special Hazards ................................................................................................................................. 2-16

2.17 Safety Guidelines when using Internal Combustion Engines............................................................. 2-21

3 Introduction

3.1 Machine overview................................................................................................................................. 3-1

3.2 Brief description of the machine ........................................................................................................... 3-2

3.3 Information and regulations on use ...................................................................................................... 3-4

3.4 Labels................................................................................................................................................... 3-8

4 Putting into operation

4.1 Cabin/control stand............................................................................................................................... 4-1

4.2 Overview of control elements ............................................................................................................. 4-33

4.3 Indicator lights and warning lights (overview)..................................................................................... 4-38

4.4 Preparatory work ................................................................................................................................ 4-41

4.5 Starting and stopping the engine........................................................................................................ 4-46

5Operation

5.1 Steering system.................................................................................................................................... 5-1

5.2 Accelerator actuation............................................................................................................................ 5-1

5.3 Brakes .................................................................................................................................................. 5-3

5.4 Travel operation.................................................................................................................................. 5-19

5.5 Differential lock................................................................................................................................... 5-40

5.6 Lights/signaling system ...................................................................................................................... 5-40

5.7 Wiper/wash system ............................................................................................................................ 5-44

5.8 Heating, ventilation and air conditioning system................................................................................. 5-45

5.9 Operating hydraulics........................................................................................................................... 5-54

5.10 Attachments........................................................................................................................................ 5-86

5.11 Machine operation.............................................................................................................................. 5-90

5.12 Emergency lowering........................................................................................................................... 5-98

5.13 Options ............................................................................................................................................... 5-99

5.14 Putting out of operation/back into operation..................................................................................... 5-104

5.15 Permanently putting out of operation................................................................................................ 5-106

6 Transportation

6.1

Towing the machine .......

...................................................................................................................... 6-1

6.2 Loading the machine ............................................................................................................................ 6-8

6.3 Transporting the machine..................................................................................................................... 6-9

Table of Contents

I-2 OM EW100 us 1.0 *ew100us1_0IVZ.fm

7 Maintenance

7.1 Information on maintenance................................................................................................................. 7-1

7.2 Maintenance overview.......................................................................................................................... 7-2

7.3 Fluids and lubricants........................................................................................................................... 7-15

7.4 Maintenance accesses ....................................................................................................................... 7-18

7.5 Cleaning and maintenance................................................................................................................. 7-25

7.6 Lubrication operation.......................................................................................................................... 7-28

7.7 Fuel system ........................................................................................................................................ 7-33

7.8 Engine lubrication system................................................................................................................... 7-39

7.9 Cooling system ................................................................................................................................... 7-41

7.10 Air filter................................................................................................................................................ 7-44

7.11 V-belt/toothed belt............................................................................................................................... 7-44

7.12 Hydraulic system ................................................................................................................................ 7-45

7.13 Electrical system................................................................................................................................. 7-49

7.14 Heating, ventilation and air conditioning system................................................................................. 7-51

7.15 Washer system................................................................................................................................... 7-51

7.16 Axles/traveling drive............................................................................................................................ 7-51

7.17 Brake system...................................................................................................................................... 7-51

7.18 Tires/tracks......................................................................................................................................... 7-52

7.19 Maintenance of attachments............................................................................................................... 7-54

7.20 Maintenance of options....................................................................................................................... 7-54

7.21 Exhaust gas treatment........................................................................................................................ 7-55

7.22 Machine preservation ......................................................................................................................... 7-55

8Malfunctions

8.1 Diesel engine malfunctions................................................................................................................... 8-1

8.2 Malfunctions of the traveling drive ........................................................................................................ 8-8

8.3 Malfunctions of the hydraulic system.................................................................................................... 8-8

8.4 Malfunctions of the electrical system.................................................................................................... 8-8

8.5 Malfunctions in the air conditioning system........................................................................................ 8-10

8.6 Malfunctions of attachments............................................................................................................... 8-10

9 Technical data

9.1 Models and trade names...................................................................................................................... 9-1

9.2 Engine................................................................................................................................................... 9-1

9.3 Traveling drive/axles............................................................................................................................. 9-2

9.4 Brakes................................................................................................................................................... 9-2

9.5 Tires...................................................................................................................................................... 9-3

9.6 Steering system.................................................................................................................................... 9-3

9.7 Operating hydraulics............................................................................................................................. 9-3

9.8 Electrical system................................................................................................................................... 9-5

9.9 Tightening torques................................................................................................................................ 9-8

9.10 Coolant ................................................................................................................................................. 9-9

9.11 Noise emissions.................................................................................................................................... 9-9

9.12 Vibration.............................................................................................................................................. 9-10

9.13 Weight................................................................................................................................................. 9-13

9.14 Payload/stability.................................................................................................................................. 9-14

Index

Index ..............................................................................................................................................................S-1

OM EW100 us 1.0 *ew100konf.fm EG-1

Declaration of conformity

Manufacturer

Wacker Neuson Linz GmbH, Flughafenstr. 7, 4063 Hörsching, Austria

Product

Declaration of conformity

Notified body according to Directive 2006/42/EC, appendix XI:

Notified body involved in procedure

Fachausschuss Bauwesen, Landsberger Str. 309, 80687 Munich, Germany

Directives and standards

We hereby declare that this product corresponds to the relevant regulations of the following Directives

and standards:

2006/42/EC, 2005/88/EC, 2000/14/EC;

DIN EN ISO 12100:2010, DIN EN 474-1:2006+A1:2009, DIN EN 474-5:2012,

DIN EN ISO 3471:2010, DIN EN ISO 3744:2010, DIN EN ISO 3449:2008, DIN EN ISO 13849-2:2012

Authorized representative for the compilation of technical documentation

Thomas Köck, team leader technical documentation

Flughafenstr. 7

4063 Hörsching/Austria

Austria

Machine designation Hydraulic excavator

Model/version E06-06

Trade name EW100

Serial number --

Output in kW 86

Measured sound power level dB(A) 94,9

Guaranteed sound power level dB(A) 96

Johannes Mahringer,

Managing director

Robert Plomberger,

Technical director

Markus Huber,

Technical director

EC Declaration of Conformity

Original declaration of conformity

Declaration of conformity

EG-2 OM EW100 us 1.0 *ew100konf.fm

Notes:

OM EW100 us 1.0 *ew100v100.fm 1-1

1

1 Foreword

1.1 Operator’s Manual

Information on this Operator’s Manual

A compartment at the rear of the cabin can be used for storing the

Operator’s Manual.

A document box on the rear wall is available as an option.

This Operator’s Manual contains important information on how to work

safely, correctly and economically with the machine. Therefore, it aims not

only at new personnel, but it also serves as a reference for experienced

personnel.

Furthermore, the reliability and the service life of the machine will be

increased by following the instructions in the Operator’s Manual. This is

why the Operator’s Manual must be kept at hand in the machine.

The operator must carefully read and understand the Operator’s Manual

before starting up, servicing or repairing the machine.

This Operator’s Manual will help to familiarize yourself more easily with

the machine, thereby enabling you to use it more safely and efficiently.

This Operator’s Manual does not include special superstructures.

Please contact your dealer if you require more information on the machine

or the Operator’s Manual.

Foreword

Table of Contents

Index

1-2 OM EW100 us 1.0 *ew100v100.fm

1

Explanation of symbols and abbreviations

Explanation of symbols

• Identifies a list

- Identifies a subdivision of a list

➥ Description of a result

1. Identifies an activity

Follow the order of the activity!

2. Continuation of an activity

Follow the order of the activity!

A Identifies an alphabetical list

B Continuation of an alphabetical list

Cross references: see page 1-1 (page)

Cross references: 7 (pos. no. or table no.)

Cross references: fig. 2 (fig. no. 1)

Cross references: – see chapter “5 Operation” on page 5-1

(see chapter)

Cross references: – see “Operation” on page 5-1 (-see text)

Information

Identifies an information that, when followed, provides for a more efficient

and economical use of the machine.

Environment

Failure to observe the instructions identified by this symbol can cause

damage to the environment.

OM EW100 us 1.0 *ew100v100.fm 1-3

1

Abbreviations

TOPS = Tip Over Protective Structure

ROPS =

Roll Over Protective Structure (without losing contact with

the ground)

FOPS = Falling Objects Protective Structure

FGPS = Front Guard Protective Structure

AUX = Auxiliary hydraulic circuit

B=Width

NW = Nominal width

PS = Stabilizer blade

LS = Stick

HSWS = Hydraulic Easy Lock quickhitch

o/h = Operating hours

Pos. = Position

Fig. = Figure

e.g. = for example

approx. = approximately

=

max. = maximum

min. = minimum

1-4 OM EW100 us 1.0 *ew100v100.fm

1

Conversion table

The rounded imperial values are indicated in brackets, for example 1060

cm³ (64.7 in³).

Volume unit

1 cm³ (0.061 in³)

1 m³ (35.31 ft³)

1 ml (0.034 US fl.oz.)

1 l (0.26 gal)

1 l/min (0.26 gal/min)

Unit of length

1 mm (0.039 in)

1 m (3.28 ft)

Weight

1 kg (2.2 lbs)

1 g (0.035 oz)

Pressure

1 bar (14.5 psi)

1 kg/cm² (14.22 lbs/in²)

Force/output

1 kN (224.81 lbf)

1 kW (1.34 hp)

1 PS (0.986 hp)

Torque

1 Nm (0.74 ft.lbs.)

Speed

1 kph (0.62 mph)

Acceleration

1 m/s² (3.28 ft/s²)

OM EW100 us 1.0 *ew100v100.fm 1-5

1

1.2 Warranty and liability

Exemption from warranty and liability

Warranty

Warranty claims can be made only if the conditions of warranty have been

observed. They are included in the General Conditions of Sales and

Delivery for new machines and spare parts sold by the dealers of Wacker

Neuson Linz GmbH. Furthermore, all instructions in this Operator’s

Manual must be observed.

Have the maintenance, delivery inspection and the entries in the service

booklet performed by a Wacker Neuson service center, otherwise

warranty claims will not be acknowledged.

Exemption from liability

• Modifying Wacker Neuson products and fitting them with additional

equipment and attachments that are not included in our delivery

program requires Wacker Neuson’s written authorization, otherwise

warranty and product liability for possible damage caused by these

modifications shall not be applicable.

• The safety of the machine can be negatively affected by performing

machine modifications without proper authority and by using spare

parts, equipment, attachments and optional equipment that have not

been checked and released by Wacker Neuson. Warranty and product

liability for possible damage caused by these modifications shall not be

applicable.

• Wacker Neuson Linz GmbH shall not be liable for injury and/or

damage to property caused by failure to observe the safety instruc-

tions, warnings and the Operator’s Manual, and by the negligence of

the duty to exercise due care when:

- handling

- operating

- servicing and performing maintenance and

- repairing the machine. This is also applicable in those cases in which

special attention has not been drawn to the duty to exercise due

care, in the safety instructions as well as in the Operator’s and

maintenance manuals.

- Read and understand the Operator’s Manual before starting up,

servicing or repairing the machine. Observe all safety instructions

and warnings.

1-6 OM EW100 us 1.0 *ew100v100.fm

1

Notes:

OM EW100 us – Edition 1.0 *ew100b210_us.fm 2-1

2 Safety Information

2.1 Safety Symbols Found In This Manual

This is the safety alert symbol. It is used to alert you to potential personal

hazards.

• Obey all safety messages that follow this symbol.

DANGER

DANGER indicates a hazardous situation which, if not avoided, will

result in death or serious injury.

Potential consequences of the hazard.

► Obey all safety messages that follow this symbol to avoid injury or

death.

WARNING

WARNING indicates a hazardous situation which, if not avoided,

could result in death or serious injury.

Potential consequences of the hazard.

► Obey all safety messages that follow this symbol to avoid possible

injury or death.

CAUTION

CAUTION indicates a hazardous situation which, if not avoided,

could result in minor or moderate injury.

Potential consequences of the hazard.

► Obey all safety messages that follow this symbol to avoid possible

minor or moderate injury.

NOTICE

NOTICE indicates a situation which, if not avoided, could result in property

damage.

Information

Information identifies an instruction that, when followed, provides for a

more efficient and economical use of the machine.

2-2 OM EW100 us – Edition 1.0 * *ew100b210_us.fm

Environment

Failure to observe the instructions identified by this symbol can result in

damage to the environment. The environment is at risk if environmentally

hazardous material, such as waste oil, is not subject to proper use or

disposal.

2.2 Warranty

Warranty claims can be brought forward to your Wacker Neuson dealer

only. Furthermore, the instructions in this Operator's Manual must be

observed.

2.3 Disposal

All fluids, lubricants, material, etc., used on the machine are subject to

specific regulations regarding collection and disposal. Dispose of different

materials and consumables separately and responsibly in accordance

with environmental protection legislation.

Environment

Avoid damage to the environment. Do not allow the oil and oily wastes to

get into the ground or stretches of water.

If the machine is no longer used according to its designated use, ensure

that it is decommissioned or put out of operation and disposed of

according to applicable regulations.

- Observe all applicable safety regulations during machine disposal.

- Machine disposal must be carried in accordance with state-of-the-art

standards that apply at the time of disposal.

2.4 Designated Use

1. In accordance with this designated use, the machine may be used

ONLY for moving earth, gravel, coarse gravel or ballast and rubble. It

may also be used for operating with the attachments approved in the

“Fields of application and use of attachments” chapter.

2. No other applications are designated for the use of the machine.

Wacker Neuson will not be liable for damage resulting from use other

than mentioned above. The operator alone will bear the risk.

3. “Designated use“ also includes observing the instructions set forth in

the Operator's Manual and observing the maintenance schedule.

4. Machine safety can be negatively affected by performing out machine

modifications without proper authority and by using spare parts,

equipment, attachments and optional equipment which have not been

checked and released by Wacker Neuson. Wacker Neuson will not be

liable for damage resulting from unapproved parts or unauthorized

modifications.

5. Wacker Neuson shall not be liable for personal injury and/or damage to

property caused by failure to observe the safety instructions on labels

and in this Operator's Manual, and by the negligence of the duty to

exercise due care when:

• transporting the machine

OM EW100 us – Edition 1.0 *ew100b210_us.fm 2-3

• operating the machine

• servicing the machine and performing maintenance.

• repairing the machine.

This is also applicable when special attention has not been drawn to the

duty to exercise due care.

1. Read and understand the Operator's Manual before starting, moving,

operating, servicing or repairing the machine. Observe the safety

instructions.

2. The machine shall not be used for transport jobs on public roads

without a specific certification.

3. In applications with lifting gear, the machine is used according to its

designated use only if the prescribed devices are installed and

functional.

4. The quickhitch is only used for locking an attachment.

5. Hammer operation is only allowed in specified areas.

2.5 Preparing To Use The Machine

Conditions for use

• The machine has been designed and built in accordance with state-of-

the-art standards and the recognized safety regulations. Nevertheless,

its use can constitute a risk to life and limb of the operator or of third

parties, or cause damage to the machine and to other material

property.

• Read and follow this Operator's manual and other manuals that

accompany the machine.

• The machine must only be used in accordance with its designated use

and the instructions set forth in the Operator's Manual.

• The machine must only be used by qualified operators who are fully

aware of the risks involved in operating the machine.

• Do not start, move or operate a damaged or malfunctioning machine.

Any mechanical dysfunctions, especially those affecting the safety of

the machine, must be repaired immediately. Only qualified technicians

shall determine how to move a damaged or malfunctioning machine to

a safe place for diagnoses and repair.

• The operator/machine owner commits himself to operate and keep the

machine in serviceable condition and, if necessary or required by law,

to require the operating or servicing persons to wear protective clothing

and safety equipment.

Operator training and knowledge

• Always keep this Operator's Manual and other manuals that

accompany the machine in their storage compartment provided in the

operator station on the machine. Immediately replace an incomplete or

illegible Operator's Manual.

• All persons working on or with the machine must read and understand

the safety information in this Operator's Manual before beginning work.

This applies especially to persons working only occasionally on the

machine, such as performing set-up or maintenance tasks.

2-4 OM EW100 us – Edition 1.0 * *ew100b210_us.fm

• Follow, and instruct the operator in, legal and other mandatory regula-

tions relevant to accident prevention and environmental protection.

These may include handling hazardous substances, issuing and/or

wearing personal protective equipment, or obeying traffic regulations.

• The operator/machine owner must regularly ensure that all persons

entrusted with operation or maintenance of the machine are working in

compliance with the Operator's Manual and are aware of risks and

safety factors of the machine.

Preparing for use

• Before starting the machine, ALWAYS inspect the machine to make

sure that it is ready for safe work and travel operation.

• Wear close-fitting work clothes that do not hinder movement. Tie back

long hair and remove all jewelry (including rings).

Information on visibility

• Before putting the machine into operation, perform a visual check to

ensure that there are neither persons nor objects or other sources of

risk around the machine.

• When using the machine, check the surroundings constantly in order to

identify potential hazards in time.

• Before using the machine, before starting work or when changing

operators, ensure that all visual aids (mirrors) work correctly, that they

are clean and adjusted in accordance with the instructions in this

Operator's Manual. The operator must observe the local regulations.

• Do not make any changes or modifications that impair visibility.

Otherwise the machine does not meet the requirements for conformity

and licensing.

Modifications and spare parts

• NEVER make any modifications, additions or conversions to the

machine and its superstructures (for example, cab, etc.), or the

machine's attachments, without the approval of Wacker Neuson. Such

modifications may affect safety and/or machine performance. This also

applies to the installation and adjustment of safety devices and valves,

as well as to welding work on load-bearing elements.

• Spare parts must comply with the technical requirements specified by

Wacker Neuson. Contact your Wacker Neuson dealer for assistance.

2.6 Operator and Technician Qualifications and Basic Responsibilities

Operator/Machine Owner responsibility

• Only allow trained and experienced individuals to operate, maintain, or

repair the machine. NEVER let unauthorized or underaged persons

operate the machine.

• Clearly and unequivocally define the individual responsibilities of the

operator and technician for operation, maintenance and repair.

• Define the machine operator's responsibilities on the job site and for

observing traffic rules. Give the operator the authority to refuse instruc-

tions by third parties that are contrary to safety

OM EW100 us – Edition 1.0 *ew100b210_us.fm 2-5

• Do not allow persons to be trained or instructed by anyone other than

an experienced person. Also, NEVER allow persons taking part in a

general training course to work on or with the machine without being

supervised by an experienced person.

Repair person qualifications

• Work on the electric system and equipment, on the undercarriage and

the steering and brake systems may be performed only by skilled

individuals who have been specially trained for such work.

• Work on the hydraulic system of the machine must be performed only

by a technician with special knowledge and experience in hydraulic

equipment.

2.7 Safety Instructions Regarding Operation

Preparing for use

• Keep the machine clean. This reduces the risk of fire hazards (such as

from combustible materials like rags), and reduces the risk of injury or

operational accidents that can be caused by dirt build-up on the travel

pedals, mirrors or foot rests and steps.

• Observe all safety, warning, and information signs and labels on the

machine.

• Start and operate the machine from the seat only.

• The operator must sit in the seat, fasten and adjust the seat belt and

check if all mirrors are adjusted correctly before putting the machine

into operation.

• Always adjust the seat position before starting work. Do not change the

seat position during machine operation or machine travel.

• Make sure that all safety devices are properly installed and functional

before starting work.

• Before putting the machine/attachment into operation (starting/

moving), ensure that no one in the immediate vicinity will be at risk.

Starting and stopping

• Perform starting and stopping procedures according to this Operator's

Manual.

• Observe all indicator lights.

• Do not use starting fluid (for example, ether) especially in those cases

in which a heater plug (intake air pre-heating) is used at the same time

– explosions hazard.

• Make sure the brakes, the steering, the travel pedals, the control levers

and the signalling and light systems are functional before machine

operation, and also before restarting after an interruption of work.

• Fold up the control lever base before releasing the seat belt in order to

avoid unintentional operation.

- Lower the attachments to the ground.

- Apply the parking brake with the switch.

2-6 OM EW100 us – Edition 1.0 * *ew100b210_us.fm

Job site awareness

• Familiarize yourself with the surroundings and circumstances of the job

site before beginning work. Be aware of:

- obstacles in the operating and traveling area

- the soil bearing capacity

- any necessary barriers separating the job site from public roads

• Always keep at a safe distance from the edges of building pits and

slopes.

• Look out for the following when operating in buildings or in enclosed

areas:

- height of the ceiling/clearances

- width of entrances

- maximum load of ceilings and floors

- sufficient room ventilation – carbon monoxide poisoning hazard.

• Observe the danger zone. See “Danger zone awareness“.

• Use the rearview mirror to stay aware of job site obstacles and

personnel.

• Always use the work lights in conditions of poor visibility and after dark.

However, make sure that users of public roads will not be temporarily

blinded by the work lights.

• Provide additional lighting of the job site if the lights of the machine are

not sufficient for performing work safely.

Danger zone awareness

• The danger zone is the area in which persons are in at risk due to the

movements of the machine, work equipment, additional equipment or

material.

• The danger zone also includes the area affected by falling material,

equipment or constructions debris. The danger zone must be extended

by 0.5m (20 in) in the immediate vicinity of buildings, scaffolds or other

elements of construction.

• Seal off the danger zone if it is not possible to keep a safe distance.

Stop work immediately if persons do not leave the danger zone in spite

of warnings.

Operating the Machine

• Never operate the machine if you are standing on the ground.

• Operate the machine ONLY when you are seated and you have

fastened your seat belt. Stop the engine before releasing the seat belt.

• During operation on slopes, move or work uphill or downhill. If traveling

across a slope cannot be avoided, bear in mind the tilting limit of the

machine. Always keep the attachments/work equipment close to the

ground. This also applies to traveling downhill. When traveling or

operating across a slope, the load must be on the uphill side of the

machine.

• On sloping terrain, ALWAYS adapt your travel speed to the prevailing

ground conditions.

• Never get on or off a moving machine, and do not jump off the

machine.

OM EW100 us – Edition 1.0 *ew100b210_us.fm 2-7

• The travel pedals require practice before a operator becomes familiar

with the pedal response. Therefore, adjust the travel speed to your

abilities and the surroundings.

• Move loads only in work position with the oscillating axle locked.

Carrying passengers

• Do not lift, lower or transport people on the machine or in the

attachment.

• Never install a man basket or an operating platform to the machine.

Mechanical integrity

• Take the necessary precautions to make sure the machine is used

only when in a safe and serviceable state.

• Operate the machine ONLY if all protective and safety-oriented

devices (ROPS, removable safety-devices, soundproofing elements,

mufflers, etc.) are in place and fully functional.

• Check the machine before entering the cab to operate the machine for

visible damage and defects. Report any changes, including changes in

the machine's function and response, to your supervisor immediately.

• If the machine is functioning unpredictably or in event of malfunctions,

stop the machine immediately, lock it, and report the malfunction to a

qualified technician or supervisor. Safety-relevant damage or malfunc-

tions oft the machine must be rectified immediately.

Traveling

• Before machine travel always check whether the supplementary

equipment and the attachments have been safely stowed away or

attached.

• Careful when reversing the machine – accidents hazard.

• Persons in the blind spot of the machine cannot seen by the operator.

• Ensure that nobody is within the danger zone of the machine when

changing the traveling direction.

• Use the rearview mirrors to reverse with the machine.

• When traveling on or in public areas, observe all applicable regula-

tions. Make sure beforehand that the machine is in compliance with

these regulations.

• Installed work lights must NOT be used for travel.

• When crossing underpasses, gates, bridges and tunnels, or when

passing under overhead lines, make sure the clearance height and

width are sufficient to avoid contact.

• Empty the bucket and dump it in until the bucket opening is in the

upward horizontal position as a minimum before traveling on public

roads.

• Do not travel any faster than 40 kph (25 mph). Use the pedals or the

brakes accordingly.

• Apart from the operator, no other persons are allowed to ride on the

machine.

2-8 OM EW100 us – Edition 1.0 * *ew100b210_us.fm

2.8 Special Instructions for Traveling on Public Roads

• The machine is subject to the applicable legal regulations of your

country.

• Safety equipment in compliance with the legal regulations of your

country must be on board, for example a warning triangle, a first aid kit

and a safety vest.

• Also follow the national accident prevention regulations.

• Always adapt your travel speed to the road and ground conditions,

machine handling and to the visibility conditions.

• Do not travel any faster than 40 kph (25 mph). Use the pedals or the

brakes accordingly.

• All attachments except buckets up to 900 mm (35.43'') wide must be

removed.

• Remove the protective Front Guard structure before traveling on public

roads – see chapter Protective Front Guard structure level II (option) on

page 4-31.

• Empty the bucket.

• Prepare the machine for travel on public road – see chapter Preparing

road travel on page 5-22.

• Do not use working lights when traveling on public roads.

• Perform a functional check of the lights (headlights, turn indicator lights

etc.).

• Perform a functional check of the brake system.

• Ensure that the hydraulic system of the machine has no leaks.

• Close the door and the windows.

• Fasten your seat belt.

2.9 Operator Protection System

• The machine is equipped with a ROPS safety cab as a standard.

• The optional protective FOPS structure protects the operator against

material falling from above.

• The optional protective Front Guard structure protects the operator

against material from the front.

DANGER

Crushing hazard by objects falling from above.

Falling object will cause serious or deadly injuries.

► When operating in areas with a risk install protective FOPS structure

(Option).

► Otherwise machine operation is prohibited.

Fig. 1: Protective FOPS and Front Guard structure

Front Guard

FOPS

La page charge ...

Wacker Neuson EW100 Manuel utilisateur

Wacker Neuson EW100 Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents