Wacker Neuson EW65 Manuel utilisateur

Taper
Manuel utilisateur
Operator’s Manual
Mobile excavator
Machine models E14-02
Edition 1.0.2
Document order number
Language
From serial number
5100027465
us
WNCE1402PPAL00162
This Operator's Manual includes
the AEM Safety Manual CE-1009
5100027465
Copyright © 2016 Wacker Neuson Linz GmbH, Hörsching
Printed in Austria
All rights reserved, in particular the copyright, the right of reproduction and the right of distribution applicable
worldwide.
This document may be used by the receiver only for the designated purpose. It may in no way be duplicated or
translated in any other language, in whole or in part, without prior permission in writing from the manufacturer.
No reproduction or translation of this publication, in whole or part, without the written consent of Wacker Neuson
Linz GmbH.
Violations of legal regulations, in particular of the copyright protection, will be subject to civil and criminal
prosecution.
Wacker Neuson Linz GmbH keep abreast of the latest technical developments and constantly improve their
products. For this reason, we may from time to time need to make changes to figures and descriptions in this
documentation that do not reflect products that have already been delivered and which will not be implemented
on these machines.
Technical data, dimensions and weights are only given as an indication. Responsibility for errors or omissions
not accepted.
The cover features the machine with possible optional equipment.
Photographs and graphics are symbolic representations and may differ from the actual products.
Non-metric weights and measurements are approximate.
Wacker Neuson is authorized to publish copyright-protected material, for example that owned by Perkins
Engines Company Ltd.
The Operator’s Manual and any amendments to it must always be available at the place of use of the machine.
Possible amendments are included at the end of the Operator’s Manual.
Wacker Neuson Linz GmbH
Flughafenstr. 7
A-4063 Hörsching
Phone: +43 (0) 7221 63000
Fax: +43 (0) 7221 63000-2200
E-mail: office.lin[email protected]
www.wackerneuson.com
Documentation Language Order no.
Operator’s Manual us 5100024873
Spare parts catalog EW65 (E14-02)
de/en/fr 1000346413
de/it/es 1000346414
Legend
Original Operator’s Manual x
Translation of original Operator’s Manual
Edition 1.0.2
Date 02/2016
Document OM E14 wheel us*
OM E14 wheel us* 1.0.2 * E14_en1_0_1IVZ.fm I-1
Table of contents
Table of contents
1Foreword
1.1 Operator’s Manual ................................................................................................................................ 1-1
1.2 Warranty and liability ............................................................................................................................ 1-8
2 Safety Information
2.1 Safety Symbols Found In This Manual................................................................................................. 2-1
2.2 Warranty ............................................................................................................................................... 2-2
2.3 Disposal................................................................................................................................................ 2-2
2.4 Designated Use .................................................................................................................................... 2-2
2.5 Preparing To Use The Machine............................................................................................................ 2-3
2.6 Operator and Technician Qualifications and Basic Responsibilities..................................................... 2-4
2.7 Safety Instructions Regarding Operation.............................................................................................. 2-5
2.8 Special Instructions for Traveling on Public Roads .............................................................................. 2-8
2.9 Operator Protection System ................................................................................................................. 2-8
2.10 Applications with Lifting Gear ............................................................................................................... 2-9
2.11 Attachments........................................................................................................................................ 2-11
2.12 Trailers................................................................................................................................................ 2-12
2.13 Hammer operation.............................................................................................................................. 2-12
2.14 Transport and Towing......................................................................................................................... 2-13
2.15 Safety Guidelines for Maintenance..................................................................................................... 2-14
2.16 Special Hazards ................................................................................................................................. 2-16
2.17 Safety Guidelines when using Internal Combustion Engines ............................................................. 2-21
3 Introduction
3.1 Machine overview................................................................................................................................. 3-1
3.2 Brief description of the machine ........................................................................................................... 3-2
3.3 Information and regulations on use ...................................................................................................... 3-4
3.4 Labels ................................................................................................................................................... 3-6
4 Putting into operation
4.1 Cabin/control stand............................................................................................................................... 4-1
4.2 Overview of control elements ............................................................................................................. 4-29
4.3 Indicator lights and warning lights (overview)..................................................................................... 4-36
4.4 Preparatory work ................................................................................................................................ 4-43
4.5 Starting and stopping the engine........................................................................................................ 4-47
5Operation
5.1 Steering system.................................................................................................................................... 5-1
5.2 Accelerator actuation............................................................................................................................ 5-1
5.3 Brakes .................................................................................................................................................. 5-6
5.4 Machine travel .................................................................................................................................... 5-11
5.5 Differential lock ................................................................................................................................... 5-30
5.6 Lights/signaling system ...................................................................................................................... 5-30
5.7 Wiper/wash system ............................................................................................................................ 5-35
5.8 Heating, ventilation and air conditioning system................................................................................. 5-36
5.9 Operating hydraulics........................................................................................................................... 5-38
5.10 Attachments........................................................................................................................................ 5-68
5.11 Work operation ................................................................................................................................... 5-72
5.12 Emergency lowering ........................................................................................................................... 5-80
5.13 Options ............................................................................................................................................... 5-81
5.14 Putting out of operation/back into operation ....................................................................................... 5-84
5.15 Permanently putting out of operation.................................................................................................. 5-86
6 Transportation
6.1 Towing the machine ............................................................................................................................. 6-1
6.2 Loading the machine ............................................................................................................................ 6-7
6.3 Transporting the machine................................................................................................................... 6-12
Table of contents
I-2 OM E14 wheel us* 1.0.2 * E14_en1_0_1IVZ.fm
Table of contents
7 Maintenance
7.1 Information on maintenance ................................................................................................................. 7-1
7.2 Maintenance overview .......................................................................................................................... 7-2
7.3 Fluids and lubricants........................................................................................................................... 7-19
7.4 Maintenance accesses ....................................................................................................................... 7-22
7.5 Cleaning and maintenance ................................................................................................................. 7-26
7.6 Lubrication work.................................................................................................................................. 7-29
7.7 Fuel system ........................................................................................................................................ 7-29
7.8 Engine lubrication system................................................................................................................... 7-36
7.9 Cooling system ................................................................................................................................... 7-39
7.10 Air filter................................................................................................................................................ 7-42
7.11 V-belt .................................................................................................................................................. 7-43
7.12 Hydraulic system ................................................................................................................................ 7-43
7.13 Electrical system................................................................................................................................. 7-47
7.14 Heating, ventilation and air conditioning system................................................................................. 7-48
7.15 Washer system ................................................................................................................................... 7-48
7.16 Axles/traveling drive............................................................................................................................ 7-48
7.17 Braking system ................................................................................................................................... 7-48
7.18 Tires.................................................................................................................................................... 7-49
7.19 Maintenance of attachments............................................................................................................... 7-51
7.20 Maintenance of options....................................................................................................................... 7-51
7.21 Exhaust gas treatment (option)........................................................................................................... 7-52
8Malfunctions
8.1 Diesel engine ........................................................................................................................................ 8-1
8.2 Malfunctions (display element/multifunctional display) ......................................................................... 8-4
9 Technical data
9.1 Models and trade names ...................................................................................................................... 9-1
9.2 Engine................................................................................................................................................... 9-1
9.3 Traveling drive ...................................................................................................................................... 9-2
9.4 Brakes................................................................................................................................................... 9-2
9.5 Tires...................................................................................................................................................... 9-2
9.6 Steering system .................................................................................................................................... 9-2
9.7 Operating hydraulics............................................................................................................................. 9-3
9.8 Electrical system................................................................................................................................... 9-4
9.9 Tightening torques ................................................................................................................................ 9-8
9.10 Coolant ............................................................................................................................................... 9-10
9.11 Noise emissions.................................................................................................................................. 9-10
9.12 Vibration.............................................................................................................................................. 9-11
9.13 Weights............................................................................................................................................... 9-14
9.14 Lift capacity/load ................................................................................................................................. 9-17
Index
Index ..............................................................................................................................................................S-1
OM E14 wheel us* 1.0.2 * E14_konf.fm EG-1
Declaration of conformity
Declaratio n of conformity
The indications specified above correspond to the existing information at time of going to press. They have
possibly changed in the meantime (refer to the original declaration of conformity supplied with the machine).
Applies to EU countries, and countries with legislation similar to that of the EU. Applies to all machines with CE
marks that have not been modified without authorization since the product was placed on the market.
Declaratio n of conformityDeclaratio n of conformity
Manufacturer
Wacker Neuson Linz GmbH, Flughafenstr. 7, 4063 Hörsching, Austria
Product
Declaration of conformity
Notified body according to Directive 2006/42/EC, appendix XI:
DGUV Test, Prüf- und Zertifizierungsstelle
Fachbereich Bauwesen, Landsberger Str. 309, 80687 Munich, Germany
EU identification number 0515
Notified body involved in procedure
TÜV SÜD Industrie Service GmbH
Westendstr. 199
D-80686 Munich
Directives and standards
We hereby declare that this product corresponds to the relevant regulations of the following Directives
and standards:
2006/42/EC, 2005/88/EC, 2000/14/EC;
DIN EN ISO 12100:2010, DIN EN 474-1:2006+A1:2009, DIN EN 474-5:2012,
DIN EN ISO 3471:2010, DIN EN ISO 3744:2010, DIN EN ISO 3449:2008;
Authorized representative for the compilation of technical documentation
Thomas Köck, team leader technical documentation
Flughafenstr. 7
4063 Hörsching
Austria
Machine designation Hydraulic excavator
Model/version E14-02 Tier III
Trade name EW65
Serial number --
Output in kW 36.2
Measured sound power level dB(A) 97
Guaranteed sound power level dB(A) 97
Johannes Mahringer,
Managing director
EC Declaration of Conformity
Declaration of conformity
EG-2 OM E14 wheel us* 1.0.2 * E14_konf.fm
Declaration of conformity
The indications specified above correspond to the existing information at time of going to press. They have
possibly changed in the meantime (refer to the original declaration of conformity supplied with the machine).
Applies to EU countries, and countries with legislation similar to that of the EU. Applies to all machines with CE
marks that have not been modified without authorization since the product was placed on the market.
Declaration of conformity
Manufacturer
Wacker Neuson Linz GmbH, Flughafenstr. 7, 4063 Hörsching, Austria
Product
Declaration of conformity
Notified body according to Directive 2006/42/EC, appendix XI:
DGUV Test, Prüf- und Zertifizierungsstelle
Fachbereich Bauwesen, Landsberger Str. 309, 80687 Munich, Germany
EU identification number 0515
Notified body involved in procedure
TÜV SÜD Industrie Service GmbH
Westendstr. 199
D-80686 Munich
Directives and standards
We hereby declare that this product corresponds to the relevant regulations of the following Directives
and standards:
2006/42/EC, 2005/88/EC, 2000/14/EC;
DIN EN ISO 12100:2010, DIN EN 474-1:2006+A1:2009, DIN EN 474-5:2012,
DIN EN ISO 3471:2010, DIN EN ISO 3744:2010, DIN EN ISO 3449:2008;
Authorized representative for the compilation of technical documentation
Thomas Köck, team leader technical documentation
Flughafenstr. 7
4063 Hörsching
Austria
Machine designation Hydraulic excavator
Model/version E14-02 Tier IV
Trade name EW65
Serial number --
Output in kW 45,5 kW
Measured sound power level dB(A) 98
Guaranteed sound power level dB(A) 98
Johannes Mahringer,
Managing director
EC Declaration of Conformity
OM E14 wheel us* 1.0.2 * E14_v100.fm 1-1
Foreword 1
1 Foreword
1.1 Operators Manual
Information on this Operators Manual
The Operator’s Manual is stored in the compartment on the left side of the
seat.
A document box behind the seat is available as an option.
This Operator’s Manual contains important information on how to work
safely, correctly and economically with the machine. Therefore, it aims not
only at new personnel, but it also serves as a reference for experienced
personnel.
Furthermore, the reliability and the service life of the machine will be
increased by following the instructions in the Operator’s Manual. This is
why the Operator’s Manual must be kept at hand in the machine.
The operator must carefully read and understand the Operator’s Manual
before starting up, servicing or repairing the machine.
This Operator’s Manual will help to familiarize yourself more easily with
the machine, thereby enabling you to use it more safely and efficiently.
This Operator’s Manual does not include special superstructures.
Please contact your dealer if you require more information on the machine
or the Operator’s Manual.
Foreword
Table of contents
Index
1-2 OM E14 wheel us* 1.0.2 * E14_v100.fm
1 Foreword
Explanation of symbols and abbreviations
Explanation of symbols
Identifies a list
- Identifies a subdivision of a list
Description of a result
1. Identifies an activity
Follow the order of the activity!
2. Continuation of an activity
Follow the order of the activity!
A Identifies an alphabetical list
B Continuation of an alphabetical list
Cross references: see page 1-1 (page)
Cross references: 7 (pos. no. or table no.)
Cross references: fig. 2 (fig. no. 1)
Cross references: – see chapter “5 Operation” on page 5-1
(see chapter)
Cross references: – see “Operation” on page 5-1 (-see text)
Information
Identifies an information that, when followed, provides for a more efficient
and economical use of the machine.
Environment
Failure to observe the instructions identified by this symbol can cause
damage to the environment.
OM E14 wheel us* 1.0.2 * E14_v100.fm 1-3
Foreword 1
Abbreviations
Fig. = Figure
AUX = Additional control circuit
B=Width
o/h = Operating hours
approx. = approximately
DPF = Diesel particulate filter
FGPS = Front Guard Protective Structure
FOPS = Falling Objects Protective Structure
if nec. = if necessary
Hydrau-
lic quick-
hitch
= Hydraulic quickhitch (for example Easy Lock)
max. = maximum
min. = minimum
NW = Nominal width
Pos. = Position
PS = Stabilizer blade
ROPS =
Roll Over Protective Structure
(without losing contact with the ground)
TOPS = Tip Over Protective Structure
e.g. = for example
1-4 OM E14 wheel us* 1.0.2 * E14_v100.fm
1 Foreword
Glossary
Attachment
All exchangeable equipment (for example buckets) released by Wacker Neu-
son and developed for work with the machine.
Working lights The lights on the roof, chassis and boom are referred to as working lights.
Towing
Tow the excavator out of the immediate danger zone
(for example railroad crossing or job site).
DOC
Diesel oxidation catalyst; removes carbon monoxide and residues of unburned
fuel from the exhaust gas
DPF Diesel particulate filter; burns soot particles in the exhaust gas
Operating company/person
A company (or person) operating the machine. This can be a job site operating
company, for example.
Operators Person performing machine travel or operation.
Machine
Unless otherwise specified, the term “machine” refers to the excavator
described in this Operator’s Manual. In some cases the machine is also
referred to as excavator to avoid confusion with other vehicles.
Machine operation
All work (for example machine travel, moving material, daily maintenance) an
operator is allowed to or has to perform in connection with the machine. The
term “machine operation” does not include maintenance only a Wacker
Neuson service center is allowed to perform.
Lift capacity table
The maximum weight which may be lifted in excavating operations. If the
upper carriage is rotated, pay attention to the values of the load diagrams.
Crawling speed Perform machine travel as slowly as possible and jerk free.
Hose rupture Hydraulic oil under pressure escapes from a hydraulic hose.
Visual aids
Visual aids are, for example, rearview mirrors, cameras, but also persons
assisting the operator during machine operation.
Control lever base The foldable control lever base on the left.
Tier III/Tier IV
The machines comply with different exhaust-gas standards depending on
optional equipment. Engine variants are described separately if there are
engine-specific differences (for example regarding operation) – see chapter “
Model designations and trade names” on page 3-2.
Load diagram
Specifies the maximum load at a given boom extension with which the upper
carriage may be rotated by 360° and the excavator may travel in creep gear
with the stabilizer blade raised without tipping over.
Additional control circuits
Additional control circuits required for certain attachments.
AUX I: auxiliary hydraulics (for example for hydraulic hammer or offset bucket)
AUX II: 3rd control circuit (for example for universal grab)
AUX III: for example Powertilt
AUX IV: hydraulic quickhitch (for example Easy Lock)
AUX V: oscillating grab
OM E14 wheel us* 1.0.2 * E14_v100.fm 1-5
Foreword 1
Right/left/front/rear
These terms are used from the view of an operator in the cabin if the front
of the cabin faces toward the oscillating-axle cylinders A.
1: left
2: right
3: front
4: rear
Image description
Symbolizes a full battery
Fig. 1
4
21
3
A
1-6 OM E14 wheel us* 1.0.2 * E14_v100.fm
1 Foreword
Target-group definition
This Operator’s Manual is intended for professional construction site personnel.
Any operator must have fully read and understood this Operator’s Manual
completely.
A dealer or person renting the machine must instruct the operator and
have this confirmed in writing.
Operator qualification and requirements for safe operation
Among other things, safe machine operation depends on the following
points:
Machine model and equipment.
Machine maintenance.
Work and travel speed.
Nature of ground and work environment.
The most important points are the operator’s qualification and power of
judgement. A well-trained operator following the Operator’s Manual and
maintenance plan ensures a long service life and durability of the machine.
Specific training enables the operator to acquire, among other things, the
following skills:
Correct assessment of work situations.
Feeling for the machine.
Recognition of possible risk situations.
Safe working by making the correct decisions for man, machine and
the environment.
The operator is at risk if the machine is not operated correctly.
Follow the operating procedures and instructions described for the
machine.
Access to the machine or machine operation is prohibited for children and
persons under the influence of alcohol, drugs or medicine.
OM E14 wheel us* 1.0.2 * E14_v100.fm 1-7
Foreword 1
Conversion table
The rounded imperial values are indicated in brackets, for example 1060
cm³ (64.7 in³).
Volume unit
1 cm³ (0.061 in³)
1 m³ (35.31 ft³)
1 ml (0.034 US fl.oz.)
1 l (0.26 gal)
1 l/min (0.26 gal/min)
Unit of length
1 mm (0.039 in)
1 m (3.28 ft)
Weight
1 kg (2.2 lbs)
1 g (0.035 oz)
Pressure
1 bar (14.5 psi)
1 kg/cm² (14.22 lbs/in²)
Force/output
1 kN (224.81 lbf)
1 kW (1.34 hp)
1 PS (0.986 hp)
Torque
1 Nm (0.74 ft.lbs.)
Speed
1 kph (0.62 mph)
Acceleration
1 m/s² (3.28 ft/s²)
1-8 OM E14 wheel us* 1.0.2 * E14_v100.fm
1 Foreword
1.2 Warranty and liability
Exemption from warranty and liability
Warranty
Warranty claims can be made only if the conditions of warranty have been
observed. They are included in the General Conditions of Sales and
Delivery for new machines and spare parts sold by the dealers of Wacker
Neuson Linz GmbH. Furthermore, all instructions in this Operator’s
Manual must be observed.
Have the maintenance, delivery inspection and the entries in the service
booklet performed by a Wacker Neuson service center, otherwise
warranty claims will not be acknowledged.
Exemption from liability
Modifying Wacker Neuson products and fitting them with additional
equipment and attachments that are not included in our delivery
program requires Wacker Neuson’s written authorization, otherwise
warranty and product liability for possible damage caused by these
modifications shall not be applicable.
The safety of the machine can be negatively affected by performing
machine modifications without proper authority and by using spare
parts, equipment, attachments and optional equipment that have not
been checked and released by Wacker Neuson. Warranty and product
liability for possible damage caused by these modifications shall not be
applicable.
Wacker Neuson Linz GmbH shall not be liable for injury and/or
damage to property caused by failure to observe the safety instruc-
tions, warnings and the Operator’s Manual, and by the negligence of
the duty to exercise due care when:
- handling
-operating
- servicing and performing maintenance and
- repairing the machine. This is also applicable in those cases in which
special attention has not been drawn to the duty to exercise due
care, in the safety instructions as well as in the Operator’s and
maintenance manuals.
- Read and understand the Operator’s Manual before starting up,
servicing or repairing the machine. Observe all safety instructions
and warnings.
OM E14 wheel us* – Edition 1.0.2 * E14w_b210_us.fm 2-1
2 Safety Information
2.1 Safety Symbols Found In This Manual
This is the safety alert symbol. It is used to alert you to potential personal
hazards.
Obey all safety messages that follow this symbol.
DANGER
DANGER indicates a hazardous situation which, if not avoided, will
result in death or serious injury.
Potential consequences of the hazard.
Obey all safety messages that follow this symbol to avoid injury or
death.
WARNING
WARNING indicates a hazardous situation which, if not avoided,
could result in death or serious injury.
Potential consequences of the hazard.
Obey all safety messages that follow this symbol to avoid possible
injury or death.
CAUTION
CAUTION indicates a hazardous situation which, if not avoided,
could result in minor or moderate injury.
Potential consequences of the hazard.
Obey all safety messages that follow this symbol to avoid possible
minor or moderate injury.
NOTICE
NOTICE indicates a situation which, if not avoided, could result in property
damage.
Information
Information identifies an instruction that, when followed, provides for a
more efficient and economical use of the machine.
2-2 OM E14 wheel us* – Edition 1.0.2 * * E14w_b210_us.fm
Environment
Failure to observe the instructions identified by this symbol can result in
damage to the environment. The environment is at risk if environmentally
hazardous material, such as waste oil, is not subject to proper use or
disposal.
2.2 Warranty
Warranty claims can be brought forward to your Wacker Neuson dealer
only. Furthermore, the instructions in this Operator's Manual must be
observed.
2.3 Disposal
All fluids, lubricants, material, etc., used on the machine are subject to
specific regulations regarding collection and disposal. Dispose of different
materials and consumables separately and responsibly in accordance
with environmental protection legislation.
Environment
Avoid damage to the environment. Do not allow the oil and oily wastes to
get into the ground or stretches of water.
If the machine is no longer used according to its designated use, ensure
that it is decommissioned or put out of operation and disposed of
according to applicable regulations.
- Observe all applicable safety regulations during machine disposal.
- Machine disposal must be carried in accordance with state-of-the-art
standards that apply at the time of disposal.
2.4 Designated Use
1. In accordance with this designated use, the machine may be used
ONLY for moving earth, gravel, coarse gravel or ballast and rubble. It
may also be used for operating with the attachments approved in the
“Fields of application and use of attachments” chapter.
2. No other applications are designated for the use of the machine.
Wacker Neuson will not be liable for damage resulting from use other
than mentioned above. The operator alone will bear the risk.
3. “Designated use“ also includes observing the instructions set forth in
the Operator's Manual and observing the maintenance schedule.
4. Machine safety can be negatively affected by performing out machine
modifications without proper authority and by using spare parts,
equipment, attachments and optional equipment which have not been
checked and released by Wacker Neuson. Wacker Neuson will not be
liable for damage resulting from unapproved parts or unauthorized
modifications.
5. Wacker Neuson shall not be liable for personal injury and/or damage to
property caused by failure to observe the safety instructions on labels
and in this Operator's Manual, and by the negligence of the duty to
exercise due care when:
transporting the machine
OM E14 wheel us* – Edition 1.0.2 * E14w_b210_us.fm 2-3
operating the machine
servicing the machine and performing maintenance.
repairing the machine.
This is also applicable when special attention has not been drawn to the
duty to exercise due care.
1. Read and understand the Operator's Manual before starting, moving,
operating, servicing or repairing the machine. Observe the safety
instructions.
2. The machine shall not be used for transport jobs on public roads
without a specific certification.
3. In applications with lifting gear, the machine is used according to its
designated use only if the prescribed devices are installed and
functional.
4. The quickhitch is only used for locking an attachment.
5. Hammer operation is only allowed in specified areas.
2.5 Preparing To Use The Machine
Conditions for use
The machine has been designed and built in accordance with state-of-
the-art standards and the recognized safety regulations. Nevertheless,
its use can constitute a risk to life and limb of the operator or of third
parties, or cause damage to the machine and to other material
property.
Read and follow this Operator's manual and other manuals that
accompany the machine.
The machine must only be used in accordance with its designated use
and the instructions set forth in the Operator's Manual.
The machine must only be used by qualified operators who are fully
aware of the risks involved in operating the machine.
Do not start, move or operate a damaged or malfunctioning machine.
Any mechanical dysfunctions, especially those affecting the safety of
the machine, must be repaired immediately. Only qualified technicians
shall determine how to move a damaged or malfunctioning machine to
a safe place for diagnoses and repair.
The operator/machine owner commits himself to operate and keep the
machine in serviceable condition and, if necessary or required by law,
to require the operating or servicing persons to wear protective clothing
and safety equipment.
Operator training and knowledge
Always keep this Operator's Manual and other manuals that
accompany the machine in their storage compartment provided in the
operator station on the machine. Immediately replace an incomplete or
illegible Operator's Manual.
All persons working on or with the machine must read and understand
the safety information in this Operator's Manual before beginning work.
This applies especially to persons working only occasionally on the
machine, such as performing set-up or maintenance tasks.
2-4 OM E14 wheel us* – Edition 1.0.2 * * E14w_b210_us.fm
Follow, and instruct the operator in, legal and other mandatory regula-
tions relevant to accident prevention and environmental protection.
These may include handling hazardous substances, issuing and/or
wearing personal protective equipment, or obeying traffic regulations.
The operator/machine owner must regularly ensure that all persons
entrusted with operation or maintenance of the machine are working in
compliance with the Operator's Manual and are aware of risks and
safety factors of the machine.
Preparing for use
Before starting the machine, ALWAYS inspect the machine to make
sure that it is ready for safe work and travel operation.
Wear close-fitting work clothes that do not hinder movement. Tie back
long hair and remove all jewelry (including rings).
Information on visibility
Before putting the machine into operation, perform a visual check to
ensure that there are neither persons nor objects or other sources of
risk around the machine.
When using the machine, check the surroundings constantly in order to
identify potential hazards in time.
Before using the machine, before starting work or when changing
operators, ensure that all visual aids (mirrors) work correctly, that they
are clean and adjusted in accordance with the instructions in this
Operator's Manual. The operator must observe the local regulations.
Do not make any changes or modifications that impair visibility.
Otherwise the machine does not meet the requirements for conformity
and licensing.
Modifications and spare parts
NEVER make any modifications, additions or conversions to the
machine and its superstructures (for example, cab, etc.), or the
machine's attachments, without the approval of Wacker Neuson. Such
modifications may affect safety and/or machine performance. This also
applies to the installation and adjustment of safety devices and valves,
as well as to welding work on load-bearing elements.
Spare parts must comply with the technical requirements specified by
Wacker Neuson. Contact your Wacker Neuson dealer for assistance.
2.6 Operator and Technician Qualifications and Basic Responsibilities
Operator/Machine Owner responsibility
Only allow trained and experienced individuals to operate, maintain, or
repair the machine. NEVER let unauthorized or underaged persons
operate the machine.
Clearly and unequivocally define the individual responsibilities of the
operator and technician for operation, maintenance and repair.
Define the machine operator's responsibilities on the job site and for
observing traffic rules. Give the operator the authority to refuse instruc-
tions by third parties that are contrary to safety
OM E14 wheel us* – Edition 1.0.2 * E14w_b210_us.fm 2-5
Do not allow persons to be trained or instructed by anyone other than
an experienced person. Also, NEVER allow persons taking part in a
general training course to work on or with the machine without being
supervised by an experienced person.
Repair person qualifications
Work on the electric system and equipment, on the undercarriage and
the steering and brake systems may be performed only by skilled
individuals who have been specially trained for such work.
Work on the hydraulic system of the machine must be performed only
by a technician with special knowledge and experience in hydraulic
equipment.
2.7 Safety Instructions Regarding Operation
Preparing for use
Keep the machine clean. This reduces the risk of fire hazards (such as
from combustible materials like rags), and reduces the risk of injury or
operational accidents that can be caused by dirt build-up on the travel
pedals, mirrors or foot rests and steps.
Observe all safety, warning, and information signs and labels on the
machine.
Start and operate the machine from the seat only.
The operator must sit in the seat, fasten and adjust the seat belt and
check if all mirrors are adjusted correctly before putting the machine
into operation.
Always adjust the seat position before starting work. Do not change the
seat position during machine operation or machine travel.
Make sure that all safety devices are properly installed and functional
before starting work.
Before putting the machine/attachment into operation (starting/
moving), ensure that no one in the immediate vicinity will be at risk.
Starting and stopping
Perform starting and stopping procedures according to this Operator's
Manual.
Observe all indicator lights.
Do not use starting fluid (for example, ether) especially in those cases
in which a heater plug (intake air pre-heating) is used at the same time
– explosions hazard.
Make sure the brakes, the steering, the travel pedals, the control levers
and the signalling and light systems are functional before machine
operation, and also before restarting after an interruption of work.
Fold up the control lever base before releasing the seat belt in order to
avoid unintentional operation.
- Lower the attachments to the ground.
- Apply the parking brake with the switch.
2-6 OM E14 wheel us* – Edition 1.0.2 * * E14w_b210_us.fm
Job site awareness
Familiarize yourself with the surroundings and circumstances of the job
site before beginning work. Be aware of:
- obstacles in the operating and traveling area
- the soil bearing capacity
- any necessary barriers separating the job site from public roads
Always keep at a safe distance from the edges of building pits and
slopes.
Look out for the following when operating in buildings or in enclosed
areas:
- height of the ceiling/clearances
- width of entrances
- maximum load of ceilings and floors
- sufficient room ventilation – carbon monoxide poisoning hazard.
Observe the danger zone. See “Danger zone awareness“.
Use the rearview mirror to stay aware of job site obstacles and
personnel.
Always use the work lights in conditions of poor visibility and after dark.
However, make sure that users of public roads will not be temporarily
blinded by the work lights.
Provide additional lighting of the job site if the lights of the machine are
not sufficient for performing work safely.
Danger zone awareness
The danger zone is the area in which persons are in at risk due to the
movements of the machine, work equipment, additional equipment or
material.
The danger zone also includes the area affected by falling material,
equipment or constructions debris. The danger zone must be extended
by 0.5m (20 in) in the immediate vicinity of buildings, scaffolds or other
elements of construction.
Seal off the danger zone if it is not possible to keep a safe distance.
Stop work immediately if persons do not leave the danger zone in spite
of warnings.
Operating the Machine
Never operate the machine if you are standing on the ground.
Operate the machine ONLY when you are seated and you have
fastened your seat belt. Stop the engine before releasing the seat belt.
During operation on slopes, move or work uphill or downhill. If traveling
across a slope cannot be avoided, bear in mind the tilting limit of the
machine. Always keep the attachments/work equipment close to the
ground. This also applies to traveling downhill. When traveling or
operating across a slope, the load must be on the uphill side of the
machine.
On sloping terrain, ALWAYS adapt your travel speed to the prevailing
ground conditions.
Never get on or off a moving machine, and do not jump off the
machine.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95
  • Page 96 96
  • Page 97 97
  • Page 98 98
  • Page 99 99
  • Page 100 100
  • Page 101 101
  • Page 102 102
  • Page 103 103
  • Page 104 104
  • Page 105 105
  • Page 106 106
  • Page 107 107
  • Page 108 108
  • Page 109 109
  • Page 110 110
  • Page 111 111
  • Page 112 112
  • Page 113 113
  • Page 114 114
  • Page 115 115
  • Page 116 116
  • Page 117 117
  • Page 118 118
  • Page 119 119
  • Page 120 120
  • Page 121 121
  • Page 122 122
  • Page 123 123
  • Page 124 124
  • Page 125 125
  • Page 126 126
  • Page 127 127
  • Page 128 128
  • Page 129 129
  • Page 130 130
  • Page 131 131
  • Page 132 132
  • Page 133 133
  • Page 134 134
  • Page 135 135
  • Page 136 136
  • Page 137 137
  • Page 138 138
  • Page 139 139
  • Page 140 140
  • Page 141 141
  • Page 142 142
  • Page 143 143
  • Page 144 144
  • Page 145 145
  • Page 146 146
  • Page 147 147
  • Page 148 148
  • Page 149 149
  • Page 150 150
  • Page 151 151
  • Page 152 152
  • Page 153 153
  • Page 154 154
  • Page 155 155
  • Page 156 156
  • Page 157 157
  • Page 158 158
  • Page 159 159
  • Page 160 160
  • Page 161 161
  • Page 162 162
  • Page 163 163
  • Page 164 164
  • Page 165 165
  • Page 166 166
  • Page 167 167
  • Page 168 168
  • Page 169 169
  • Page 170 170
  • Page 171 171
  • Page 172 172
  • Page 173 173
  • Page 174 174
  • Page 175 175
  • Page 176 176
  • Page 177 177
  • Page 178 178
  • Page 179 179
  • Page 180 180
  • Page 181 181
  • Page 182 182
  • Page 183 183
  • Page 184 184
  • Page 185 185
  • Page 186 186
  • Page 187 187
  • Page 188 188
  • Page 189 189
  • Page 190 190
  • Page 191 191
  • Page 192 192
  • Page 193 193
  • Page 194 194
  • Page 195 195
  • Page 196 196
  • Page 197 197
  • Page 198 198
  • Page 199 199
  • Page 200 200
  • Page 201 201
  • Page 202 202
  • Page 203 203
  • Page 204 204
  • Page 205 205
  • Page 206 206
  • Page 207 207
  • Page 208 208
  • Page 209 209
  • Page 210 210
  • Page 211 211
  • Page 212 212
  • Page 213 213
  • Page 214 214
  • Page 215 215
  • Page 216 216
  • Page 217 217
  • Page 218 218
  • Page 219 219
  • Page 220 220
  • Page 221 221
  • Page 222 222
  • Page 223 223
  • Page 224 224
  • Page 225 225
  • Page 226 226
  • Page 227 227
  • Page 228 228
  • Page 229 229
  • Page 230 230
  • Page 231 231
  • Page 232 232
  • Page 233 233
  • Page 234 234
  • Page 235 235
  • Page 236 236
  • Page 237 237
  • Page 238 238
  • Page 239 239
  • Page 240 240
  • Page 241 241
  • Page 242 242
  • Page 243 243
  • Page 244 244
  • Page 245 245
  • Page 246 246
  • Page 247 247
  • Page 248 248
  • Page 249 249
  • Page 250 250
  • Page 251 251
  • Page 252 252
  • Page 253 253
  • Page 254 254
  • Page 255 255
  • Page 256 256
  • Page 257 257
  • Page 258 258
  • Page 259 259
  • Page 260 260
  • Page 261 261
  • Page 262 262
  • Page 263 263
  • Page 264 264
  • Page 265 265
  • Page 266 266
  • Page 267 267
  • Page 268 268
  • Page 269 269
  • Page 270 270
  • Page 271 271
  • Page 272 272
  • Page 273 273
  • Page 274 274
  • Page 275 275
  • Page 276 276
  • Page 277 277
  • Page 278 278
  • Page 279 279
  • Page 280 280
  • Page 281 281
  • Page 282 282
  • Page 283 283
  • Page 284 284
  • Page 285 285
  • Page 286 286
  • Page 287 287
  • Page 288 288
  • Page 289 289
  • Page 290 290
  • Page 291 291
  • Page 292 292
  • Page 293 293
  • Page 294 294
  • Page 295 295
  • Page 296 296
  • Page 297 297
  • Page 298 298
  • Page 299 299
  • Page 300 300
  • Page 301 301
  • Page 302 302
  • Page 303 303
  • Page 304 304
  • Page 305 305
  • Page 306 306
  • Page 307 307
  • Page 308 308
  • Page 309 309
  • Page 310 310
  • Page 311 311
  • Page 312 312
  • Page 313 313
  • Page 314 314
  • Page 315 315
  • Page 316 316
  • Page 317 317
  • Page 318 318
  • Page 319 319
  • Page 320 320
  • Page 321 321
  • Page 322 322
  • Page 323 323
  • Page 324 324
  • Page 325 325
  • Page 326 326
  • Page 327 327
  • Page 328 328
  • Page 329 329
  • Page 330 330
  • Page 331 331
  • Page 332 332
  • Page 333 333
  • Page 334 334
  • Page 335 335
  • Page 336 336
  • Page 337 337
  • Page 338 338
  • Page 339 339
  • Page 340 340
  • Page 341 341
  • Page 342 342
  • Page 343 343
  • Page 344 344
  • Page 345 345
  • Page 346 346
  • Page 347 347
  • Page 348 348
  • Page 349 349
  • Page 350 350
  • Page 351 351
  • Page 352 352
  • Page 353 353
  • Page 354 354
  • Page 355 355
  • Page 356 356
  • Page 357 357
  • Page 358 358
  • Page 359 359
  • Page 360 360
  • Page 361 361
  • Page 362 362
  • Page 363 363
  • Page 364 364
  • Page 365 365
  • Page 366 366
  • Page 367 367
  • Page 368 368
  • Page 369 369
  • Page 370 370
  • Page 371 371
  • Page 372 372
  • Page 373 373
  • Page 374 374
  • Page 375 375
  • Page 376 376
  • Page 377 377
  • Page 378 378
  • Page 379 379
  • Page 380 380
  • Page 381 381
  • Page 382 382
  • Page 383 383
  • Page 384 384
  • Page 385 385
  • Page 386 386
  • Page 387 387
  • Page 388 388
  • Page 389 389
  • Page 390 390
  • Page 391 391
  • Page 392 392
  • Page 393 393
  • Page 394 394
  • Page 395 395
  • Page 396 396
  • Page 397 397
  • Page 398 398
  • Page 399 399
  • Page 400 400
  • Page 401 401
  • Page 402 402
  • Page 403 403
  • Page 404 404
  • Page 405 405
  • Page 406 406
  • Page 407 407
  • Page 408 408
  • Page 409 409
  • Page 410 410
  • Page 411 411
  • Page 412 412
  • Page 413 413
  • Page 414 414
  • Page 415 415
  • Page 416 416
  • Page 417 417
  • Page 418 418
  • Page 419 419
  • Page 420 420
  • Page 421 421
  • Page 422 422
  • Page 423 423
  • Page 424 424
  • Page 425 425
  • Page 426 426
  • Page 427 427
  • Page 428 428
  • Page 429 429
  • Page 430 430
  • Page 431 431
  • Page 432 432
  • Page 433 433
  • Page 434 434
  • Page 435 435
  • Page 436 436
  • Page 437 437
  • Page 438 438
  • Page 439 439
  • Page 440 440
  • Page 441 441
  • Page 442 442
  • Page 443 443
  • Page 444 444
  • Page 445 445
  • Page 446 446
  • Page 447 447
  • Page 448 448
  • Page 449 449
  • Page 450 450
  • Page 451 451
  • Page 452 452
  • Page 453 453
  • Page 454 454
  • Page 455 455
  • Page 456 456
  • Page 457 457
  • Page 458 458
  • Page 459 459
  • Page 460 460
  • Page 461 461
  • Page 462 462
  • Page 463 463
  • Page 464 464
  • Page 465 465
  • Page 466 466
  • Page 467 467
  • Page 468 468
  • Page 469 469
  • Page 470 470
  • Page 471 471
  • Page 472 472
  • Page 473 473
  • Page 474 474
  • Page 475 475
  • Page 476 476
  • Page 477 477
  • Page 478 478
  • Page 479 479
  • Page 480 480
  • Page 481 481
  • Page 482 482
  • Page 483 483
  • Page 484 484
  • Page 485 485
  • Page 486 486
  • Page 487 487
  • Page 488 488
  • Page 489 489
  • Page 490 490
  • Page 491 491
  • Page 492 492
  • Page 493 493
  • Page 494 494
  • Page 495 495
  • Page 496 496
  • Page 497 497
  • Page 498 498
  • Page 499 499
  • Page 500 500
  • Page 501 501
  • Page 502 502
  • Page 503 503
  • Page 504 504
  • Page 505 505
  • Page 506 506
  • Page 507 507
  • Page 508 508
  • Page 509 509
  • Page 510 510
  • Page 511 511
  • Page 512 512
  • Page 513 513
  • Page 514 514
  • Page 515 515
  • Page 516 516
  • Page 517 517
  • Page 518 518
  • Page 519 519
  • Page 520 520
  • Page 521 521
  • Page 522 522
  • Page 523 523
  • Page 524 524
  • Page 525 525
  • Page 526 526
  • Page 527 527
  • Page 528 528
  • Page 529 529
  • Page 530 530
  • Page 531 531
  • Page 532 532
  • Page 533 533
  • Page 534 534
  • Page 535 535
  • Page 536 536
  • Page 537 537
  • Page 538 538
  • Page 539 539
  • Page 540 540
  • Page 541 541
  • Page 542 542
  • Page 543 543
  • Page 544 544
  • Page 545 545
  • Page 546 546
  • Page 547 547
  • Page 548 548
  • Page 549 549
  • Page 550 550
  • Page 551 551
  • Page 552 552
  • Page 553 553
  • Page 554 554
  • Page 555 555
  • Page 556 556
  • Page 557 557
  • Page 558 558
  • Page 559 559
  • Page 560 560
  • Page 561 561
  • Page 562 562
  • Page 563 563
  • Page 564 564
  • Page 565 565
  • Page 566 566
  • Page 567 567
  • Page 568 568
  • Page 569 569
  • Page 570 570
  • Page 571 571
  • Page 572 572
  • Page 573 573
  • Page 574 574
  • Page 575 575
  • Page 576 576
  • Page 577 577
  • Page 578 578
  • Page 579 579
  • Page 580 580
  • Page 581 581
  • Page 582 582
  • Page 583 583
  • Page 584 584
  • Page 585 585
  • Page 586 586
  • Page 587 587
  • Page 588 588
  • Page 589 589
  • Page 590 590
  • Page 591 591
  • Page 592 592
  • Page 593 593
  • Page 594 594
  • Page 595 595
  • Page 596 596
  • Page 597 597
  • Page 598 598
  • Page 599 599
  • Page 600 600
  • Page 601 601
  • Page 602 602
  • Page 603 603
  • Page 604 604
  • Page 605 605
  • Page 606 606
  • Page 607 607
  • Page 608 608
  • Page 609 609
  • Page 610 610
  • Page 611 611
  • Page 612 612
  • Page 613 613
  • Page 614 614
  • Page 615 615
  • Page 616 616
  • Page 617 617
  • Page 618 618
  • Page 619 619
  • Page 620 620
  • Page 621 621
  • Page 622 622
  • Page 623 623
  • Page 624 624
  • Page 625 625
  • Page 626 626
  • Page 627 627
  • Page 628 628
  • Page 629 629
  • Page 630 630
  • Page 631 631
  • Page 632 632
  • Page 633 633
  • Page 634 634
  • Page 635 635
  • Page 636 636
  • Page 637 637
  • Page 638 638
  • Page 639 639
  • Page 640 640
  • Page 641 641
  • Page 642 642
  • Page 643 643
  • Page 644 644
  • Page 645 645
  • Page 646 646
  • Page 647 647
  • Page 648 648
  • Page 649 649
  • Page 650 650
  • Page 651 651
  • Page 652 652
  • Page 653 653
  • Page 654 654
  • Page 655 655
  • Page 656 656
  • Page 657 657
  • Page 658 658
  • Page 659 659
  • Page 660 660
  • Page 661 661
  • Page 662 662
  • Page 663 663
  • Page 664 664
  • Page 665 665
  • Page 666 666
  • Page 667 667
  • Page 668 668
  • Page 669 669
  • Page 670 670
  • Page 671 671
  • Page 672 672
  • Page 673 673
  • Page 674 674
  • Page 675 675
  • Page 676 676
  • Page 677 677
  • Page 678 678
  • Page 679 679
  • Page 680 680
  • Page 681 681
  • Page 682 682
  • Page 683 683
  • Page 684 684
  • Page 685 685
  • Page 686 686
  • Page 687 687
  • Page 688 688

Wacker Neuson EW65 Manuel utilisateur

Taper
Manuel utilisateur

dans d''autres langues