Posiflex TX-5600E Manuel utilisateur

Taper
Manuel utilisateur

Ce manuel convient également à

1
TX-5600/5700 TX-5600E/5700E
Package Contents
TX-5600/5600E/5700/5700E POS box…………...……...(x1)
12VDC/84W power adaptor (TX-5600/5700)
or 12VDC/150W power adaptor (TX-5600E/5700E)...….(x1)
Power cord…………………………………………......(x1)
Wall-mount bracket (optional)……………………….…..(x1)
User manual……………………………………………....(x1)
14550903010 Ver. A0
http://www.posiflex.com
TX-5600/5600E/5700/5700E
Fanless POS Box
User Manual
2
SOME IMPORTANT NOTES
FCC NOTES
This system meets industry & government requirements and applicable standards.
This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions manual, may cause
interference to radio communications. It has been tested and found to comply with
limits for a Class A digital device pursuant to subpart B of Part 15 of FCC Rules,
which are designed to provide reasonable protection against interference when
operated in a commercial environment. Operation of this equipment in a residential
area is likely to cause interference in which case the user at his own expense will
be required to take whatever measures to correct the interference.
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
CE CLASS A WARNING
This equipment is compliant with Class A of CISPR 32. In a residential
environment this equipment may cause radio interference.
AVERTISSEMENT CE CLASSE A
Cet équipement est conforme à la classe A de CISPR 32. Dans un environnement
sidentiel, cet équipement peut provoquer des interférences radio.
WARRANTY LIMITS
Warranty will terminate automatically when the machine is opened by any person
other than the authorized technicians. The user should consult his/her dealer for the
problem happening. Warranty voids if the user does not follow the instructions in
application of this merchandise. The manufacturer is by no means responsible for
any damage or hazard caused by improper application.
LIMITES DE GARANTIE
La garantie prend fin automatiquement lorsque la machine est ouverte par une
personne autre que les techniciens autorisés. L'utilisateur doit consulter son
revendeur pour le problème qui se produit. La garantie s'annule si l'utilisateur ne
suit pas les instructions d'application de cette marchandise. Le fabricant n'est en
aucun cas responsable de tout dommage ou danger causé par une mauvaise
application.
警告使用者
這是甲類的資訊產品,在居住的環境中使用時,可能會造成射頻干擾,在這
3
種情況下,使用者會被要求採取某些適當的對策。
SAFETY INSTRUCTIONS
This equipment is not suitable for use in locations where children are likely to be
present.
CONSIGNES DE SÉCURITÉ
Cet équipement ne convient pas à une utilisation dans des lieux pouvant accueillir
des enfants.
BATTERY CAUTION NOTES
Dispose of used batteries according to the instructions.
Replacement of a battery with an incorrect type that can defeat a safeguard
(for example, in the case of some lithium battery types)
Disposal of a battery into fire or a hot oven, or mechanically crushing or
cutting of a battery that can result in an explosion.
Leaving a battery in an extremely high temperature surrounding
environment that can result in an explosion or the leakage of flammable
liquid or gas.
A battery subjected to extremely low air pressure that may result in an
explosion or the leakage of flammable liquid or gas.
BATTERIE ATTENTION NOTES
Jetez les piles usagées conformément aux instructions.
Remplacement d'une batterie avec un type incorrect qui peut annuler une
sauvegarde (par exemple, dans le cas de certains types de batterie au
lithium)
Mise au rebut d'une batterie dans le feu ou dans un four chaud, ou
écrasement ou coupure mécanique d'une batterie pouvant entraîner une
explosion.
Laisser une batterie dans un environnement environnant à des températures
extrêmement élevées pouvant entraîner une explosion ou la fuite de liquide
ou de gaz inflammable.
Une batterie soumise à une pression atmosphérique extrêmement basse
pouvant provoquer une explosion ou une fuite de liquide ou de gaz
inflammable.
警告
本電池如果更換不正確會有爆炸的危險,請依製造商說明書處理用過之電
池。
4
Views
Front View of TX-5600/5700
Front View of TX-5600E/5700E
Top View of TX-5600/5700/5600E/5700E
Power Button
Powered USB Port
Storage Status LED Indicator
Power Status LED Indicator
Power Button
USB 2.0 Port
Power Status LED Indicator
Storage Status LED Indicator
5
Bottom View of TX-5600/5700/5600E/5700E
Rear I/O Ports
TX-5600/5700/5600E/5700E
1
Mic-in / line-out combo jack
2
USB 3.0 port
3
RJ45 LAN port
4
RJ11 cash drawer (CR) port
5
DVI port
6
HDMI port
7
VGA port
8
COM port
9
12VDC-IN power jack
Rubber Pad
Rubber Pad
Service Door
3
6
9
7
5
4
2
1
8
6
Connecting Power Adapter and I/O Cables
To have the terminal ready for operation, please connect the connector of
power adapter and all of the connectors of required I/O cables respectively to
the 12VDC-IN power jack and appropriate I/O ports. Please make sure that
each of the cables is fully connected to the correct port. Damages due to
incorrect connection or orientation are not covered by product warranty!
Some cable connectors like the connectors of LAN or cash drawer (CR) cables
have to be gently inserted until a click is heard. It is recommended that the I/O
ports, such as COM port, parallel port, and VGA port, should be screwed after
the I/O cable connectors are completely connected. And please make sure that
each connector has to be connected to the right peripheral device in the right
way.
CAUTION: On doing insertion or extraction of a cable connector, please
always hold the connector head itself instead of pulling the cable wire.
Doing this could damage the cables and ports, which is considered as an
artificial damage and is not covered by the warranty. The means of power
cord should be connected to a socket-outlet with earthing connection.
ATTENTION: Lors de l'insertion ou de l'extraction d'un connecteur de
câble, veuillez toujours tenir la tête du connecteur elle-même au lieu de
tirer le fil du câble. Cela pourrait endommager les câbles, ce qui est
considé comme un dommage artificiel et n'est pas couvert par la
garantie. Le cordon d'alimentation doit être connecté à une prise de
courant avec mise à la terre.
Note: The COM ports of TX-5600/5600E/5700/5700E do not supply power by
default. To make the COM ports supply power, you can set up the
COM ports through the dedicated settings listed in the table below.
The VGA port of TX-5600/5600E/5700/5700E can supply +12VDC
power through system BIOS setting for Posiflex LCD monitor.
Nevertheless, except Posiflex VGA monitor, do not connect any other
monitor to this port with VGA power enabled.
TX-5600/5600E/5700/5700E
COM1/2/3
VGA
5VDC
12VDC
12VDC
BIOS Setting
V
V
Jumper Setting
V
7
Installing Optional Peripheral Devices
Posiflex TX-5600/5600E/5700/5700E can work with multiple optional
peripheral devices, such as LCD monitor, cash drawer and the like.
Before installing an optional peripheral device, make sure that the system is
powered off and the external power source is removed from the POS box to
prevent electric hazard! Failure to follow the warning description will void the
product warranty!
For the detailed instruction, refer to each of the user manuals of the optional
peripheral devices.
Installing an Optional Second Storage (SSD)
The TX-series system is provided with a second storage bracket for you to
install an optional second storage. To avoid users from damaging the main
board of the system, it is highly recommended that the optional second storage
installation is implemented by professional technicians.
Installing a Memory Upgrade Module
The TX-series system is provided with two DRAM slots for you to expand or
replace memory. Before shipping, one memory has been inserted into one
socket of the main board. To expand or replace memory, follow the two steps
below.
1. Loosen and remove the screw from the service
door.
2. Remove the service door.
To avoid users from damaging the main board of the system, it is highly
recommended that the memory expansion and replacement are implemented
by professional technicians.
8
Mounting the TX-5600/5600E/5700/5700E on the Wall
(Optional)
1. Fix the wall mount bracket onto the wall by
using attached plastic anchors and four M3.5-
16L screws.
2. Do spiral insertion of 4 M4-7L screw bolts into
the 4 screw bolt holes.
3. Lineup the 4 screw bolts to be inserted into the 4
tracks. Then slide downwards the system along
the track until a click sound is given for
completely mounting the system with the bracket
on the wall.
For detailed installation description, please refer to the WB-4200 bracket
installation guide.
Powering ON/OFF the POS Box
Power ON TX-5600/5600E/5700/5700E
Press down the power button to power on the TX-
5600/5600E/5700/5700E.
Power OFF TX-5600/5600E/5700/5700E
In most cases, push the power button again to power the system
off. However, if the POS box halts for unknown reasons, please
be advised to hold the power more than 10 seconds to initiate a
forced shutdown.
Status LED Indicator
There are two status LED indicators, power status LED indicator and SSD
status LED indicator, on the front side of the TX-5600/5600E/5700/5700E.
After powering ON the POS system, you can read the system operation status
from the power and SSD status LED indicators. The LED status is described
below.
9
LED
Status
Description
POWER
Solid green
System power ON
Solid red
System standby
SSD
Flash green
Data access
Installing an Operating System
This product is highly professional equipment. Therefore, we do NOT
encourage you to install any operating system into this machine without
professional assistance. Posiflex Technology, Inc. shall not be responsible for
any technical support to questions on this aspect. We suggest that you contact
your dealer for OS installation.
Operating System Recovery
For the TX-5600/5600E/5700/5700E main system preloaded with an operating
system, Posiflex provides a recovery DVD shipped with the main system for
the preloaded operating system. The system integrator shall take care of
software restoration after the OS is recovered.
If you plan to recover your operating system, we do NOT encourage you to
recover any operating system. Please contact your service center for operating
system recovery.
Operation Environment
This terminal must NOT be operated in an environment with restricted
ventilation. There must be at least 25 mm air clearance around any top or side
ventilation holes with a free flow of air around the unit at all times for system
operation.
Specifications
TX-5600
TX-5600E
TX-5700
TX-5700E
CPU
Intel Skylake-S: Core i3
Processor
Intel Skylake-S: Core i5
Processor
Chipset
H110
Q170
Memory
DDR4 SO-DIMM x2, Max. 16GB
OS
Windows 10 IoT / Windows 7 / POSReady 7 / Linux (by request)
VGA Port
VGA(DB15 pin) x 1 , supporting +12V/2.5A
HDMI Port
HDMI x 1
DVI Port
DVI-I x 1
Serial Port
DB9 x 3 for COM1 ~ COM3
COM5 & COM6 pin header through service door
5 x RS-232(COM1/2/3/5/6)
Ethernet Port
10/100/1000 Mb x 2
10
TX-5600
TX-5600E
TX-5700
TX-5700E
Wireless Com.
Optional, 802.11 ac with dipole antenna, M.2 (2230) module
Power Supply
TX-5600/5700:
12VDC power adaptor, 84W
TX-5600E/5700E:
12VDC power adaptor, 150W
CR Port
CR port x 1, controlling 2 cash drawers
USB Port
TX-5600/5700:
USB 3.0 x 4 (on the rear I/O side)
USB 2.0 x 3 (on the front side)
1 x internal USB port by pin header
TX-5600E/5700E:
USB 3.0 x 4 (on the rear I/O side)
24V/2A powered USB port x 1 (on the front side)
12V/1A powered USB port x 2 (on the front side)
1 x internal USB port by pin header
Audio Port
MIC-in / line-out x 1 & 1 x internal speaker
Storage
SATAIII x 2 + M.2 (2280)
Extension Slot
M.2 (2230)
Power Switch
Soft switch
Mechanical Installation
Desktop or wall mount, VESA mount 75 x 75
Wall-Mount Bracket
Optional, WB-4200
LED Indicator
Front Panel: Power on/ standby, bi-color LED indicators and
storage LED indicator
Rear Panel: Ethernet link LED on Ethernet connector
COM 5/6 Extension
Cable
Optional for COM 5/6 pin header inside service door
Dimension
(W x D x H)
220 x 202 x 83 mm
Weight
2.75 kg
Operating Condition
C - 40°C, 20%RH - 90%RH
Storage Condition
-20°C - 7C, 10%RH - 90%RH
The product information and specifications are subject to change without prior notice.
To get the detailed information on TX-5600/5600E, please check this model from
Posiflex Global Website (http://www.posiflex.com/en-global/Download/download).
11
<MEMO>
12
<MEMO>
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12

Posiflex TX-5600E Manuel utilisateur

Taper
Manuel utilisateur
Ce manuel convient également à

dans d''autres langues