Allen + Roth 2267FM-28-201 Manuel utilisateur

Catégorie
Cheminées
Taper
Manuel utilisateur

Ce manuel convient également à

welcoming • sophisticated • inspiring
1
ITEM #2416658
ELECTRIC FIREPLACE
TV STAND
MODEL #2267FM-28-201
Français p. 19
Español p. 37
allen + roth
®
is a trademark or registered trademark of LF,
LLC. All rights reserved.
ATTACH YOUR RECEIPT HERE
Serial Number__________________ Purchase Date__________________
Questions, problems, missing parts? Before returning to your retailer, call our customer service
department at 1-866-439-9800, 8 a.m. - 8 p.m., EST, Monday - Sunday.
VR20055
2
TABLE OF CONTENTS
Package Contents ............................................................................................................................... 3
Hardware Contents.............................................................................................................................. 4
Safety Information ............................................................................................................................... 4
Preparation .......................................................................................................................................... 8
Assembly Instructions.......................................................................................................................... 8
Corner Assembly (Optional) ...............................................................................................................11
Change Door Panel (Optional) .......................................................................................................... 12
Operating Instructions ....................................................................................................................... 13
Care And Maintenance ...................................................................................................................... 15
Troubleshooting ................................................................................................................................. 16
One-Year Limited Warranty ............................................................................................................... 17
Replacement Parts List ..................................................................................................................... 18
3
PACKAGE CONTENTS
B
A
I
C
E
D
K
J
F
M
N
O
L
G
H
P
PART DESCRIPTION QUANTITY
A Top 1
B Corner Panel 1
C Left Wall 1
D Right Wall 1
E Left Front Panel 1
F Right Front Panel 1
G Center Panel 1
H
Wood Door Panel
(Optional)
1
I L Corner Support Rod 1
J Base And Heater 1
PART DESCRIPTION QUANTITY
K Fireplace Brick Wall 1
L Fireplace Glass Front 1
M Fire Log 1
N Fireplace Grate 1
O
Remote Control
(Battery Inside)
1
P Panel 1
4
HARDWARE CONTENTS (NOT SHOWN ACTUAL SIZE)
AA BB CC DD EE FF
PART DESCRIPTION QUANTITY
AA
Long Bolt
25
BB
Washer
25
CC
Wooden Dowel
18
DD
Touch-up Pen
1
EE
Screw
6
FF
L-Bracket
2
SAFETY INFORMATION
Please read and understand this entire manual before
attempting to assemble, operate or install the product.
This equipment has been tested and found to comply
with the limits for Class B digital devices, pursuant to
Part 15 of the FCC rules. These limits are designed
to provide reasonable protection against harmful
interference in a residential installation. The equipment
generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance
with the instructions, may cause harmful interference
to radio or television reception, which can be
determined by turning the equipment off and on. The
user is encouraged to try and correct the interference
by one or more of the following measures:
Reorient or relocate the receiving antenna
Increase the separation between the equipment and
the receiver
Connect the equipment into an outlet on a
circuit different from that to which the receiver is
connected.
Consult the dealer or an experienced radio/TV
technician for help.
This device complies with Part 15 of the FCC rules.
Operation is subject to the following two conditions:
1. This device may not cause harmful interference,
and
2. This device must accept any interference received,
including interference that may cause undesired
operation.
5
SAFETY INFORMATION (CONT'D)
Modifications not approved by the party responsible
for compliance could void users authority to operate
the equipment.
This Class B digital apparatus complies with Canadian
ICES-003.
IMPORTANT INSTRUCTIONS
When using electrical appliances, basic precautions
should always be followed to reduce the risk of fire,
electric shock and injury to persons, including the
following:
DANGER
To reduce the electrical shock, tipping and instability
of the product.
Read all instructions before installing or using this
heater.
If the information in this manual is not followed
exactly, an electric shock or fire may result causing
property damage, personal injury or loss of life.
ALWAYS unplug this appliance/furnishing from the
electrical outlet before cleaning or servicing.
This product is intended to fit most plasma and
LCD televisions (up to 56 inches and weighing a
maximum of 80 pounds). Using this item with loads
heavier than the stated maximum can result in
tipping and/or instability, which can result in injury or
even death.
WARNING
Risk of death or serious injury may occur when
children climb on audio and/or video equipment
furniture. A remote control or toys placed on the
furnishing and as a result the furnishing may tip
over on the child.
Risk of death or serious injury may occur.
Relocating audio and/or video equipmentto furniture
not specifically designed to support audio and/or
video quipment may result in death or serious injury
due to the furnishing collapsing or over turning onto
a child.
This appliance is hot when in use. To avoid burns,
DO NOT let bare skin touch hot surfaces. Keep
combustible material, such as furniture, pillows,
bedding, papers, clothes and curtains at least 3 feet
from this appliance and keep them away from the
sides and rear.
Extreme caution is necessary when any heater
is used by or near children or individuals with
disabilities and whenever the fireplace is left
operating and unattended.
DO NOT run cord under carpeting. DO NOT cover
cord with throw rugs, runners, or similar coverings.
DO NOT route cord under furniture or appliances.
Arrange cord away from traffic areas and where it
will not be tripped over.
DO NOT insert or allow foreign objects to enter any
ventilation or exhaust opening as this may cause
an electric shock or fire, or damage the appliance.
This appliance has hot and arcing or sparking parts
inside. DO NOT use it in areas where gasoline,
paint or flammable vapors or liquids are used or
stored. This fireplace should not be used as a
drying rack for clothing. Christmas stockings or
decorations should not be hung in the area of it.
Use this appliance only as described in the manual.
Any other use is NOT recommended by the
manufacturer and may cause fire, electric shock or
injury to persons.
Reduce the risk of burns, fire, electrical shock, or
injury to persons:
Unplug from outlet before putting on or taking off
parts.
Close supervision is necessary when this furnishing
is used by, or near children, invalids, or disable
persons.
Use this furnishing only for its instended use
as described in these instructions. DO NOT
use attachments not recommended by the
manufacturer.
Keep the cord away from heated surfaces.
Never operate the furnishing with the air openings
blocked. Keep the air openings free of lint, hair, and
the like.
Never drop or insert any onject into any opening.
DO NOT operate where aerosol (spray) products
are being used or where oxygen is being
administered.
To disconnect, turn all controls to the off position,
then remove plug from outlet.
Each surface intended to support a load shall have
a cor responding statement in the use instructions
specifying the maximum intended load for that
surface in pounds (kilograms).
Risk of electric shock-connect this furnishing to
a properly grounded outletonly. See Grounding
Instructions.
6
SAFETY INFORMATION (CONT'D)
Risk of electric shock, fire and injury-review the
assembly instrustion to confirm that the appropriate
critical components and accessories are being used
with the furnishing.
CAUTION
DO NOT operate any heater with a damaged
cord or plug or after the heater malfunctions. DO
NOT operate any heater if it has been dropped
or damaged in any manner. Disconnect power
at service panel and have heater inspected by a
reputable electrician before reusing.
Any repairs to this fireplace should be carried out by
a qualified service person.
Under no circumstances should this fireplace be
modified. Parts having to be removed for servicing
must be replaced prior to operating this fireplace
again.
Household use only.
DO NOT use outdoors.
WARNING – Death or serious injury may occur
when children climb on audio and/or video
equipment furniture. A remote control or toys placed
on the furnishing may encourage a child to climb on
the furnishing and as a result the furnishing may tip
over on to the child”.
WARNING – Relocating audio and/or video
equipment to furniture not specifically designed to
support audio and/or video equipment may result
in death or serious injury due to the furnishing
collapsing or over turning onto a child”.
This heater is not intended for use in bathrooms,
laundry areas and similar indoor locations. NEVER
place heater where it may fall into a bathtub or other
water container.
To disconnect this appliance, turn controls to the
OFF position, then remove plug from outlet.
ONLY connect to properly grounded outlets.
This appliance, when installed, must be electrically
grounded in accordance with local codes, with the
current CSA C22.1 Canadian Electrical Code or
follow U.S.A. Installations, follow local codes and
the National Electrical Code, ANSI/NFPA N0.70.
To prevent a possible fire, DO NOT block air intakes
or exhaust in any manner. DO NOT use on soft
surfaces, like a bed, where opening may become
blocked.
The heaters MUST NOT be located immediately
below a socket-outlet.
ALWAYS plug heaters directly into a wall outlet /
receptacle. NEVER use with an extension cord or
re-loadable power tap (outlet / power strip).
DO NOT slide insert on top of wood to avoid
scratching wood surface.
DO NOT place any object on top of the insert or
block the air intakes / vents as this can cause the
unit to overheat and could cause a fire.
7
SAFETY INFORMATION (CONT'D)
Electrical Connection
A 15-Amp, 120-volt, 60 Hz circuit with a properly
grounded outlet is required. Preferably, the fireplace
will be on a dedicated circuit as other appliances
on the same circuit may cause the circuit breaker
to trip or the fuse to blow when the heater is in
operation. The unit comes standard with 6-ft. three-
wire cord, exiting from the rear of the fireplace. DO
NOT exceed the current rating of the current tap.
Grounding Instructions
This heater is for use on 120 volt. The cord has a
plug as shown below. See illustration or grounding
instruction. An adapter as shown at C is available
for connecting three-blade grounding type plugs
to two-slot receptacles. The green grounding plug
extending from the adapter must be connected to
a permanent ground such as a properly grounded
outlet box. The adapter should not be used if a
three-slot grounded receptacle is available.
A B C
Grounding Pin
Grounding Means
Metal
Screw
Cover of
Grounding
Box
Adapter
SAVE THESE INSTRUCTIONS
8
PREPARATION
Before beginning assembly of product, make sure
all parts are present. Compare parts with package
contents list and hardware contents list. If any part is
missing or damaged, do not attempt to assemble the
product.
Estimated Assembly Time: 50 minutes
Tools Required for Assembly (not
included): Phillips screwdriver
ASSEMBLY INSTRUCTIONS
1. From behind the assembly, align the holes on
left front panel (E) with the corresponding holes
on left wall (C). securing with two washers (BB)
and two long bolts (AA).
Repeat for right wall (D)
Hardware Used
AA
Long Bolt
x 4
BB
Washer
x 4
1
F
E
C
BB
AA
D
2. Insert four wooden dowels (CC) into holes on left
outer side of base (J). Place assembly from Step
1 onto base (J), securing with three washers
(BB) and three long bolts (AA).
Repeat for right wall (D).
Hardware Used
AA
Long Bolt
x 6
BB
Washer
x 6
CC
Wooden Dowel
x 8
CC
BB
AA
1
1
J
2
2
9
ASSEMBLY INSTRUCTIONS (CONT’D)
3. Insert two wooden dowels (CC) into the top
middle holes on both left front panel (E) and right
front panel (F). Carefully position the center
panel (G) into place between left front panel (E)
and right front panel (F). Secure each side with
one washer (BB) and one long bolt (AA).
Hardware Used
AA
Long Bolt
x 2
BB
Washer
x 2
CC
Wooden Dowel
x 2
G
F
E
CC
BB
AA
1
3
2
4. Insert two wooden dowels (CC) into the top
outer holes on both left wall (C) and right wall
(D). Attach top (A), securing from underneath
with seven washers (BB) and seven long bolts
(AA).
Hardware Used
AA
Long Bolt
x 7
BB
Washer
x 7
CC
Wooden Dowel
x 4
A
D
C
CC
BB
AA
1
4
2
5. From behind the assembly, attach the fireplace glass
front (L), lowering it into the front groove on base (J).
Secure the Glass by turning the pre-assembled
plastic knobs.
L
1
5
2
10
ASSEMBLY INSTRUCTIONS (CONT’D)
6. Place the fireplace grate (N) by matching the
bottom pins into the holes on the base (J).
Slot the USB cable from the heater underneath
through the cable hole on the base (J).
N
J
6
7. Remove the film from the adhesive on the top of
the fireplace grate (N) and place the fire log (M)
on the center of the fireplace grate (N).
Attach the USB cable from the heater into the
USB port behind the fireplace grate (N).
N
2
M
7
1
3
8. Screw two L-bracket (FF) onto the fireplace brick
wall (K) using four screws (EE).
Hardware Used
EE
Screw
x 4
FF
L-Bracket
x 2
K
EE
FF
8
11
ASSEMBLY INSTRUCTIONS (CONT’D)
9. Insert the fireplace brick wall (K) into the mantel,
slotting it into the grooves on base (J). Secure
it by using two screws (EE) into the L-bracket
(FF).
Hardware Used
EE
Screw
x 2
1
K
EE
J
9
2
10. Place this panel on top of firebox with corner
bumpers facing inward.
10
CORNER ASSEMBLY (OPTIONAL)
1. From behind the assembly, Attach L corner
support rod (I), secure with one washer (BB) and
one long bolt (AA).
Hardware Used
AA
Long Bolt
x 1
BB
Washer
x 1
I
BB
AA
1
12
CORNER ASSEMBLY (CONT’D)
2. Insert four wooden dowels (CC) into the top
back holes of mantel, Attach corner panel (B),
secure with five washers (BB) and five long bolts
(AA).
Assembly is now complete. With the help of
another person, move the assembly to the final
desired location. Once in final position you may
plug the heater into the power outlet.
Hardware Used
AA
Long Bolt
x 5
BB
Washer
x 5
CC
Wooden Dowel
x 4
B
CC
BB
AA
2
NOTE: Use the pre-assembled levelers on the
base of the fireplace to level the unit. Twist the
levelers counterclockwise to increase the height,
twist the clockwise to decrease the height.
CHANGE DOOR PANEL (OPTIONAL)
Note: The pre-installed glass door panel can be switched out with the included wood door panel (H).
1. Remove the silicone trim along the outer edges of the glass panel on the inside of the flip down
door. Start at a corner and pull to remove the four pieces. Be careful not to damage the silicone
trim as it will be used to secure the new panel.
2. Remove the glass panel from the door frame, then insert the included wood door panel (H).
3. Using your finger press the silicone trim back into place. Move around the outer edge of the panel
until all four sides are secure.
H
21
1
4
3
2
3
1
2
3
4
13
OPERATING INSTRUCTIONS
Control Panel Remote Control
To use the remote control, first remove
the plastic tab by gently pullling it out of
remote control.
Controls and Display
The control panel will display the heater setting when the unit power is turned ON. Whichever control icon
you press will display the current setting of the corresponding function. Press the control icon again to adjust
the setting. Following adjustment of any setting(s), the unit will resume to display the heater setting after 5
seconds.
Power Function
When the unit is plugged-in but not in use, F or C will illuminate to indicate that it is in stand-by
mode.
Press the POWER ICON to turn the main power to the unit ON or OFF.
When the unit is powered ON, the control panel will display the heater setting to indicate the unit
has power.
Functions stored in memory will resume at the last setting.
When the unit is powered OFF, the fan will continue to blow for a 40 second cool-down cycle prior
to shutting down (a countdown will be displayed).
Flame Brightness Function
Press the FLAME BRIGHTNESS ICON to display the current flame brightness setting.
Press the FLAME BRIGHTNESS ICON again to scroll down through the flame brightness settings:
5, 4, 3, 2, 1, OF (OFF).
Flame Speed Function
Press the FLAME SPEED ICON to display the current flame speed setting.
Press the FLAME SPEED ICON again to scroll down through the flame speed settings: 5, 4, 3, 2, 1.
14
OPERATING INSTRUCTIONS (CONT’D)
Heater Function
Press the HEATER ICON to display the current heater setting.
Press the HEATER ICON again to scroll down through the heater settings.
Note: Long-hold the icon to quickly scroll through settings.
Set the heater to “HI” (High) to have the heater run continually.
Set the heater to “OF” (OFF) to use the flame functions without heat.
This heater has a thermostat sensor to control the ambient temperature in the surrounding area
of the fireplace. The heater will cycle ON and OFF to maintain the selected temperature. The
thermostat setting range is 90ºF (43°C) to 65°F (18°C).
Note: This may not exactly match the room thermostat reading as their sensors are located in
different areas.
Hold down the FLAME SPEED ICON for 10 seconds to toggle between Fahrenheit and Celsius. “F”
or “C” will be displayed on the control panel (°F/°C can only be toggled from the control panel and
will not work if using the remote control).
See HEATER OVERRIDE section to disengage the heater.
Sleep Timer Function (Remote Control Only)
The Sleep TIMER function will set a countdown to shut down the unit’s main power.
Press the TIMER ICON to display the current Sleep Timer setting.
Press the TIMER ICON again to scroll through the timer settings, which are: 30 (minutes), 1H, 2H,
3H, 4H, 5H, 6H, 7H, 8H, 9H, OF (OFF).
When the timer reaches zero, it will turn OFF the main power and will maintain all the settings in
memory.
HEATER OVERRIDE
The power to the heater can be disengaged to prevent the heater from being accidentally or unintentionally
powered on. This feature is primarily added to help prevent children from powering on the heater when it is not
desired.
Note: The heater override can only be set from the control panel and will not work if using the remote control.
First turn the main power OFF. Press the POWER ICON; as the heater setting display is flashing, press the
POWER ICON again and long-hold 20 seconds. The E3 symbol will display to indicate that the heater is
now disengaged.
Note: The Flame and Timer functions will operate normally. Only the heater is disengaged.
Repeat the same process to re-engage the heater function. The E3 symbol will change back to display the
heater setting when the heater is re-engaged.
MEMORY FUNCTION
This unit has a memory function that allows you to turn off the MAIN POWER and retains all the other
function settings (excluding the SLEEP TIMER function).
15
CARE AND MAINTENANCE
Make sure the unit is turned OFF, unplugged and the heating elements of heater are cool whenever you are
cleaning the heater or fireplace.
Clean the metal trim using a water-dampened soft, clean cloth. DO NOT use brass polish or household
cleaners as these products will damage the metal trim.
The motors used on the fan and the flame generator assembly are pre-lubricated for extended bearing life
and require no further lubrication. However, periodic cleaning/vacuuming of the fan/heater and air intake/
output vents are recommended.
When the heater is not in use, the power cord should be stored properly to avoid contact with hot or sharp
objects.
Any other servicing should be performed by an authorized service representative.
Tips for using touch-up pen (DD): For scratches, stroke in direction of scratch. For worn areas, stroke in the
direction of wood grain. Rub excess colorant promptly with a soft cloth.
The furnishing has no user serviceable parts.
Replacing the Remote-Control Battery
When the remote control (O) stops operating or its range
seems reduced, it is time to replace the battery. Note: The
battery should be removed if the product is to be left unused
for a long time.
1. The battery compartment is located on the back end of the
remote control (O).
2. Press the small tab inward as you slide the battery door
open and remove the old battery.
3. Insert a new CR2025 lithium battery (not included),
checking that the + and - sides of the battery match the
inside of the battery compartment.
4. Re-insert the battery door.
BATTERY
O
Note: Harmful if swallowed.
Disposal of Used Battery
A battery may contain hazardous substances that could be endangering the environment and human health.
This symbol marked on the battery and/or packaging indicates that used
battery shall not be treated as municipal waste. Instead it shall be left at
the appropriate collection point for recycling.
By ensuring the used battery is disposed of correctly, you will help
prevent potential negative consequences for the environment and human
health. The recycling of materials will help to conserve natural resources.
Do not dispose of battery in fire. Battery may explode or leak.
For more information about collection and recycling of used battery, please
contact your local municipality, your waste disposal service or the
point-of-sale where you purchased this battery.
16
TROUBLESHOOTING
PROBLEM POSSIBLE CAUSE CORRECTIVE ACTION
Error E1 displayed on
control panel.
The overheat sensor has
been engaged.
Unplug unit, wait 15-20 minutes, then the sensor will reset
itself. Plug the unit back in and turn on the heater. If the
problem persists, call customer service.
Note: The other functions will work normally excluding the
heater.
Error E2 displayed on
control panel.
The thermostat sensor
is broken or not working
correctly.
Unplug unit, wait 15-20 minutes, then the sensor will reset
itself. Plug the unit back in and turn on the heater. If the
problem persists, call customer service.
Note: The other functions will work normally excluding the
heater.
Error E3 displayed on
control panel.
Heater override function is
engaged.
See page 14 Heater Override Section for more details.
No power. The unit does not have
power.
Check that the power cord is securely plugged into a
standard 120V outlet. Then check to make sure the unit is
powered on.
No flame effect but the
unit is powered on.
The flame effect is
powered off.
Push the flame brightness button until desired level is
achieved.
USB cable. Connect the USB cable into the USB port behind the
Fireplace Grate.
Heater and blower
do not power on but
rest of functions are
working.
Heater setting. Set the heater to "HI" (High) to have the heater run
continually.
Power cord gets warm
to the touch.
Normal operation. This is normal for a heater appliance as it requires more
current to operate. Check the connections of the appliance
cord and the outlet. Make sure the plug fits tightly into the
outlet. During use, check the plug and outlet frequently to
determine if it is HOT; if so, discontinue use of the appliance
and consult with a qualified technician to check or change
the overheating outlet(s).
Remote control does
not work.
Weak or failing battery. Replace with 1 CR-2025 battery (See page 15 for more
information).
Remote control signal
is weak and only work
sometimes.
Pressing the buttons too
quickly.
Press the buttons slowly and steadily to ensure the
transmitter recognizes the request.
Using the remote control
too far away or at an off
angle.
Move closer to the insert; the remote control will only work
within a distance of 20 feet and 45 degrees to either side
from the front of the fireplace insert.
Fan motor continues
to blow after the unit is
powered off.
Normal operation. This is a standard feature; the blower runs for an additional
time to cool off the heater tubes.
17
ONE-YEAR LIMITED WARRANTY
The manufacturer warrants that your new electric fireplace is free from manufacturing and material
defects for a period of one year from date of purchase, subject to the following conditions and
limitations.
Install and operate this electric fireplace in accordance with the installation and operating instructions
furnished with the product at all times. Any unauthorized repair, alteration, willful abuse, accident, or
misuse of the product shall nullify this warranty.
This warranty is non-transferable, and is made to the original owner, provided that the purchase was
made through an authorized supplier of the product.
The warranty is limited to the repair or replacement of part(s) found to be defective in material or
workmanship, provided that such part(s) have been subjected to normal conditions of use and service,
after said defect is confirmed by the manufacturers inspection.
The manufacturer may, at its discretion, fully discharge all obligations with respect to this warranty by
refunding the wholesale price of the defective part(s).
Any installation, labor, construction, transportation, or other related costs/expenses arising from
defective part(s), repair, replacement, or otherwise of same, will not be covered by this warranty, nor
shall the manufacturer assume responsibility for same.
The owner/user assumes all other risks, if any, including the risk of any direct, indirect or consequential
loss or damage arising out of the use, or inability to use the product, except as provided by law.
All other warranties-expressed or implied-with respect to the product, its components and accessories,
or any obligations/liabilities on the part of the manufacturer are hereby expressly excluded.
The manufacturer neither assumes, nor authorizes any third party to assume on its behalf, any other
liabilities with respect to the sale of the product.
The warranties as outlined within this document do not apply to non-accessories used in conjunction
with the installation of this product.
This warranty is void if:
1. The fireplace is subjected to prolonged periods of dampness or condensation.
2. Any unauthorized alteration, willful abuse, accident, or misuse of the product.
3. You do not have the original receipt of purchase.
18
REPLACEMENT PARTS LIST
For replacement parts, call our customer service department at 1-866-439-9800, 8 a.m. - 8 p.m., EST,
Monday - Sunday.
HHGG II JJ LL KK MM
E
M
L
F
Q
H
K
J
G
A
N
O
P
PART DESCRIPTION PART #
A Top 2267FM-28-201-TOP
E
Insert Surround Set
PF-2267FM-28-201-INSERT
SURROUND SET
F
G
H
Flip-Down Door Center
Panels
2267FM-28-201-DOOR CENTER
PANELS
Q
J Base 2267FM-28-201-BASE
K Fireplace Brick Wall YEH-KDI-28-INSERT WALL BRICK
L Fireplace Glass Front YEH-KDI-28-GLASS FRONT
M Fire Log YEH-KDI-28-FIRELOG
N Fireplace Grate YEH-KDI-28-FIRE GRATE
O Remote Control RC-HE85EL01
P Heater YEH-KDI-28-HEATER
GG Glass Clips 2267FM-28-GLASS CLIPS
HH KD Hardware Pack
PH-2267FM-28-201-HARDWARE
PACK
II
Flip-Down Door
Hardware Set
PU17-1267FM-II/JJ/LLJJ
LL
KK
Flip-Down Door
Handle
PU17-2267FM-HANDLE
MM Leveler T-1007
Printed in Vietnam
allen + roth
®
is a trademark or registered trademark
of LF, LLC. All rights reserved.
welcoming • sophisticated • inspiring
19
ARTICLE #2416658
FOYER ÉLECTRIQUE
ET MEUBLE POUR
TÉLÉVISEUR
MODÈLE #2267FM-28-201
allen + roth
®
est une marque de commerce ou une marque
de commerce déposée de LF, LLC. Tous droits réservés.
JOIGNEZ VOTRE REÇU ICI
Numéro de série __________________ Date d’achat__________________
Des questions, des problèmes, des pièces manquantes? Avant de retourner l’article au détaillant,
appelez notre service à la clientèle au 1 866 439-9800, entre 8 h et 20 h (HNE), du lundi au dimanche.
20
TABLE DES MATIÈRES
Contenu de l’emballage ..................................................................................................................... 21
Quincaillerie incluse........................................................................................................................... 22
Consignes de sécurité ....................................................................................................................... 22
Préparation ........................................................................................................................................ 26
Instructions pour l’assemblage .......................................................................................................... 26
Assemblage en coin (facultatif) ......................................................................................................... 29
Remplacement des panneaux de porte (facultatif) ............................................................................ 30
Mode d’emploi ................................................................................................................................... 31
Entretien ............................................................................................................................................ 33
Dépannage ........................................................................................................................................ 34
Garantie limitée de un an .................................................................................................................. 35
Liste des pièces de rechange ............................................................................................................ 36
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54

Allen + Roth 2267FM-28-201 Manuel utilisateur

Catégorie
Cheminées
Taper
Manuel utilisateur
Ce manuel convient également à