Ubiquiti UniFi Guide de démarrage rapide

Marque: Ubiquiti

Modèle: UniFi

Taper: Guide de démarrage rapide

Ce manuel convient également à

ULED-AT

UniFi LED Panel

Package Contents

System Requirements

An 802.3at-compliant network switch

UniFi LED mobile app software

Mobile device: iOS 10 or Android 5.0

UniFi LED Controller software

Computer: UniFi Application Server (UAS) 0.5.0, Ubuntu 16.04 LTS (Xenial Xerus)

64-bit or Debian 9 64-bit

Web browser: Google Chrome (Other browsers may have limited functionality.)

UniFi Dimmer Switch, model UDIM-AT or UDIM-AC

Hardware Overview

Create PDF in your applications with the Pdfcrowd HTML to PDF API PDFCROWD

LED

PoE+

Flashing White Initializing.

Steady White System ready.

Steady Blue Adopted by LED Controller.

Alternating White/Blue Firmware upgrade is taking place.

The PoE+ port is a 10/100 Ethernet port used to connect the power and should be

connected to the LAN. Power is provided by a UniFi Switch with 802.3at PoE+.

Note: The PoE+ port requires 25W of power, which can be supplied by an

802.3at-compliant UniFi Switch.

Create PDF in your applications with the Pdfcrowd HTML to PDF API PDFCROWD

MAC Sticker

Reset

Used to scan the MAC address. For details, refer to “Quick Setup”.

The Reset button serves two functions:

Restart Press and release the Reset button quickly.

Restore to Factory Default Settings Press and hold the Reset button for more than

five seconds.

Hardware Installation

To install and configure the UniFi LED Panel:

Create PDF in your applications with the Pdfcrowd HTML to PDF API PDFCROWD

Configuring the UniFi LED Panel

Follow the instructions for the software you wish to use:

UniFi LED App

Create PDF in your applications with the Pdfcrowd HTML to PDF API PDFCROWD

3. Follow the on-screen instructions to configure the UniFi LED Panel.

UniFi LED Controller Software

1. Install the latest version of the UniFi LED Controller software on a computer on the

same Layer 2 network as the UniFi LED Panel:

Ubuntu users Download the software from ui.com/download/unifi-led

UAS users Install the software using the UAS management console.

2. Launch a web browser and go to https://localhost:20443

Create PDF in your applications with the Pdfcrowd HTML to PDF API PDFCROWD

3. The UniFi LED Controller will appear, allowing you to configure the UniFi LED Panel,

as well as customize other settings.

For additional details on the UniFi LED Controller, refer to the documentation

available at: ui.com/download/unifi

Quick Setup

This section describes the Quick Setup procedure for installations with large numbers

of UniFi LED Panels and Dimmer Switches. The Quick Setup requires using the UniFi

LED app along with a QR Code Log that you create. Each UniFi LED Panel or Dimmer

Switch has a removable MAC Sticker on its reverse side; this has a QR code used to

scan the device’s MAC address. The Quick Setup consists of these steps:

Create the QR Code Log

Create PDF in your applications with the Pdfcrowd HTML to PDF API PDFCROWD

Install the LED Panels and Dimmer Switches

Scan the QR codes

Create the QR Code Log

1. Download the QR Code Log template at: ubnt.link/QR-Code-Log

2. Print out as many copies as needed (each sheet can log up to 16 LED Panels and 3

Dimmer Switches).

Create PDF in your applications with the Pdfcrowd HTML to PDF API PDFCROWD

3. Fill in the Site (such as “1st Floor Meeting Room”) and Controller (such as “UniFi

LED Controller”) on each sheet.

Install the LED Panels and Dimmer Switches

For each device:

Create PDF in your applications with the Pdfcrowd HTML to PDF API PDFCROWD

3. Install the device as decribed in the Installation section of the device’s Quick Start

Guide.

Scan the QR Codes

Create PDF in your applications with the Pdfcrowd HTML to PDF API PDFCROWD

3. The UniFi LED app will guide you through the process of adding devices by scanning

the QR codes on the QR Code Log sheet(s).

Note: For smaller installations, instead of scanning the QR codes, you can also

use the UniFi LED app’s Locate function to identify and assign individual LED

Panels to their groups.

Specifications

ULED-AT

Create PDF in your applications with the Pdfcrowd HTML to PDF API PDFCROWD

ULED-AT

Dimensions 602 x 602 x 56.7 mm (23.7 x 23.7 x 2.23")

Weight 4.5 kg (9.92 lb)

Networking Interface 10/100 Mbps Ethernet Port

Connectivity Bluetooth 4.1

Buttons Reset

LEDs Status

Power Method 802.3at PoE+

Supported Voltage Range Standard PoE+ 42.5-57.0V

Max. Power Consumption 25.5W

Mounting Standard T-Grid

Operating Temperature 0 to 40° C (32 to 104° F)

Certifications FCC, IC

Lighting

Initial Delivered Luminance (Max.) 2300 lm

Efficacy 100 lm/W*

CCT 4,000 K

L80 > 50,000 hrs

CRI > 80

Beam Angle 114°

Brightness Control 10-100% Dimming

Create PDF in your applications with the Pdfcrowd HTML to PDF API PDFCROWD

Lighting

Environment Indoor Dry Location

* Based on power delivered to the LED Panel

Safety Notices

1. Read, follow, and keep these instructions.

2. Heed all warnings.

3. Only use attachments/accessories specified by the manufacturer.

WARNING: Do not use this product in location that can be submerged by water.

WARNING: Avoid using this product during an electrical storm. There may be a remote

risk of electric shock from lightning.

Electrical Safety Information

1. Compliance is required with respect to voltage, frequency, and current requirements indicated

on the manufacturer’s label. Connection to a different power source than those specified may

result in improper operation, damage to the equipment or pose a fire hazard if the limitations are

not followed.

2. There are no operator serviceable parts inside this equipment. Service should be provided only

by a qualified service technician.

Limited Warranty

ui.com/support/warranty

The limited warranty requires the use of arbitration to resolve disputes on an individual basis, and,

where applicable, specify arbitration instead of jury trials or class actions.

Create PDF in your applications with the Pdfcrowd HTML to PDF API PDFCROWD

Compliance

FCC

Changes or modifications not expressly approved by the party responsible for compliance could

void the user’s authority to operate the equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two

conditions.

1. This device may not cause harmful interference, and

2. This device must accept any interference received, including interference that may cause

undesired operation.

This equipment has been tested and found to comply with the limits for a Class A digital device,

pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection

against harmful interference when the equipment is operated in a commercial environment. This

equipment generates, uses, and can radiate radio frequency energy and, if not installed and used

in accordance with the instruction manual, may cause harmful interference to radio

communications. Operations of this equipment in a residential area is likely to cause harmful

interference in which case the user will be required to correct the interference at his own expense.

This radio transmitter has been approved by FCC.

ISED Canada

CAN ICES-3(A)/NMB-3(A)

This device complies with ISED Canada licence-exempt RSS standard(s). Operation is subject to

the following two conditions:

1. This device may not cause interference, and

2. This device must accept any interference, including interference that may cause undesired

operation of the device.

This radio transmitter has been approved by ISED Canada.

Create PDF in your applications with the Pdfcrowd HTML to PDF API PDFCROWD

CAN ICES-3(A)/NMB-3(A)

Le présent appareil est conforme aux CNR d’ISDE Canada applicables aux appareils radio

exempts de licence. L’exploitation est autorisée aux deux conditions suivantes :

1. l’appareil ne doit pas produire de brouillage;

2. l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible

d’en compromettre le fonctionnement.

Le présent émetteur radio a été approuvé par ISDE Canada.

IMPORTANT NOTE

Radiation Exposure Statement

This equipment complies with radiation exposure limits set forth for an uncontrolled

environment.

This equipment should be installed and operated with minimum distance 20 cm between the

radiator and your body.

This transmitter must not be co-located or operating in conjunction with any other antenna or

transmitter.

AVIS IMPORTANT

Déclaration sur l’exposition aux rayonnements

Cet équipement est conforme aux limites prévues pour l’exposition aux rayonnements dans un

environnement non contrôlé.

Lors de l’installation et de la mise en fonctionnement de l’équipement, assurez-vous qu’il y ait

une distance minimale de 20 cm entre l’élément rayonnant et vous.

Cet émetteur ne doit être installé à proximité d’aucune autre antenne ni d’aucun autre émetteur,

et ne doit être utilisé conjointement à aucun autre de ces appareils.

Create PDF in your applications with the Pdfcrowd HTML to PDF API PDFCROWD

Online Resources

Create PDF in your applications with the Pdfcrowd HTML to PDF API PDFCROWD

Ubiquiti UniFi Guide de démarrage rapide

Marque: Ubiquiti

Modèle: UniFi

Taper: Guide de démarrage rapide

Ce manuel convient également à

ULED-AT

Télécharger le PDF

rapport

dans d''autres langues

English: Ubiquiti UniFi Quick start guide

Documents connexes

Autres documents

Peloton Remote Control Mode d'emploi