Uniden DFR6 Manuel utilisateur

DFR6
Uniden
Marque
Uniden
Modèle
DFR6
Catégorie
Détecteurs radar / lidar
Taper
Manuel utilisateur
LONG RANGE Radar/Laser Detector
Detailed User’s Manual
DFR6
Issue 3, June 2017
Printed in Korea
© 2017 Uniden America Corporation
Irving, Texas
CUSTOMER CARE
At Uniden®, we care about you!
If you need assistance, please do NOT return this product to your place of purchase.
Save your receipt/proof of purchase for warranty.
Quickly find answers to your questions by:
1. Reading your owner’s manual.
2. Visiting our customer support website at www.uniden.com.
Images in this manual may differ slightly from your actual product.
DISCLAIMER: Radar detectors are illegal in some states. Some states prohibit mounting any object on your
windshield. Check applicable law in your state and any state in which you use the product to verify that using
and mounting a radar detector is legal. Uniden radar detectors are not manufactured and/or sold with the
intent to be used for illegal purposes. Drive safely and exercise caution while using this product. Do not change
settings of the product while driving. Uniden expects consumer’s use of these products to be in compliance with
all local, state, and federal law. Uniden expressly disclaims any liability arising out of or related to your use of this
product.
CONTENTS
CUSTOMER CARE .......................................................................................................................................2
FEATURES ......................................................................................................5
INSTALL AND TURN ON DFR6 ......................................................................5
INSTALL ..........................................................................................................................................................5
Windshield ...............................................................................................................................................5
Dashboard ................................................................................................................................................5
TURN ON .......................................................................................................................................................5
WHAT’S IN THE BOX ......................................................................................6
PARTS OF THE DFR6 ...................................................................................... 6
NON-KEY ELEMENTS ................................................................................................................................ 7
POWER CONNECTOR ...............................................................................................................................7
MENU SYSTEM ...............................................................................................7
BASIC OPERATIONS ......................................................................................8
FEATURE DETAILS .........................................................................................9
HIGHWAY VS CITY MODE .......................................................................................................................9
POP MODE ....................................................................................................................................................9
SCAN DISPLAY ............................................................................................................................................ 9
ALARM PRIORITIES ....................................................................................................................................9
MAINTENANCE ..............................................................................................9
MAINTAINING THE EQUIPMENT ..........................................................................................................9
UPDATING THE FIRMWARE .................................................................................................................... 9
TROUBLESHOOTING ...................................................................................10
SPECIFICATIONS .........................................................................................10
FCC/INDUSTRY CANADA INFORMATION .................................................11
ONE-YEAR LIMITED WARRANTY ...............................................................11
- 5 -
UNIDEN
LONG RANGE RADAR/LASER DETECTOR
DETAILED USER’S MANUAL
DFR6
FEATURES
• Super Long Range Laser Radar Detection
• Voice Notifications
• Radar band frequency displays
• Easy to read OLED display
• Advanced K and Ka band filters
• Invisible to VG-2™ and Spectre I/IV/IV+™ radar detectors; Spectre I and IV undetectable
• Displays Signal Strength and Vehicle Battery Voltage
INSTALL AND TURN ON DFR6
You can mount the DFR6 on the windshield (bracket included) or on the dashboard (hook and loop tape
included).
INSTALL
Windshield
When you mount the DFR6 on the windshield, mount it in the middle of the windshield between the driver and
passenger. Be sure there are no obstructions and that there is a clear view through the back window.
1. Attach the rubber suction cups to the bracket and push the cups firmly onto the windshield.
2. Slide the unit onto the bracket until it clicks into place.
3. Plug the power cord into the DFR6 and plug the cigarette lighter adapter into the vehicle’s cigarette lighter.
4. The DFR6 automatically turns on and runs through a self test cycle.
Release the DFR6 from the bracket by pressing the Eject key on top of the detector.
Dashboard
The same types of mounting requirements for the windshield apply for mounting the unit on the dashboard.
1. Attach the unit to the dashboard using the hook and loop fastener tape.
2. Plug the power cord into the DFR6 and plug the cigarette lighter adapter into the vehicle’s cigarette lighter.
3. The DFR6 automatically turns on and runs through a self test cycle.
Pull the bracket from the dashboard, separating the hook and loop tape.
TURN ON
1. Inert the power cord’s RJ45 connector into the DFR6s power jack.
2. Insert the power cord’s cigarette lighter adapter into the vehicle’s cigarette lighter port.
3. The DFR6 automatically turns on and runs through a systems check.
- 6 -
WHAT’S IN THE BOX
DFR6 Radar Detector 12V DC Power Cord with RJ45 Connection
Not Shown:
Hook and Loop Fastener Tape
Spare Fuse for DC Power Cord
Windshield Mounting Bracket
PARTS OF THE DFR6
Audio
Jack
Power
Jack
POWER
VOL +
MENU
VOL −
USB
Eject
Eagle
Eye
Latch
Slot
MUTE/DIM
CITY
Signal
Strength
KEY PRESS TO... PRESS AND HOLD TO...
POWER
Turn DFR6 on and off. NA
VOL +
• Turn volume up (7 levels: 0 - 6).
• In Menus, go to next item.
NA
VOL –
• Turn volume down (7 levels: 0 - 6).
• In Menus, go to previous item.
MENU
• Access the Menu system.
• In the Menu system, press to cycle through
options for the current menu item.
Exit the Menu system.
MUTE/DIM
MUTE
• MUTE on - Press
MUTE/DIM
to mute an alarm.
Returns to normal operation 10 seconds after the
alert ends or if a different band is detected during
Mute mode. Mute On displays for a few seconds.
• MUTE off - Press
MUTE/DIM
to restore audible
alarms before the 10 second automatic mute
time-out.
DIM - Changes the OLED, Key Backlight,
and Strength LED intensity:
• Bright
• Dim
• Dark
• Off
- 7 -
KEY PRESS TO... PRESS AND HOLD TO...
CITY
Press to change modes between HIGHWAY and
CITY.
NA
NON-KEY ELEMENTS
ELEMENT WHAT IT DOES
Eagle Eye Provides a 360° monitoring radius.
Latch Slot
Insert the bracket latch into this slot.
Mini USB Provides PC connection for data updates.
Audio Jack Plug in headset.
Eject Press to release the bracket latch.
Power Jack Plug the 12V Power Cord here.
Signal Strength Displays how strong the signal received is (5 levels).
POWER CONNECTOR
USB port
MUTE
button
LED
ELEMENT WHAT IT DOES
MUTE button Press the mute button to mute an alarm. Returns to normal operation
10 seconds after the alert ends or if a different band is detected during
Mute mode. Mute On displays on the DFR6 for a few seconds.
LED (Red) Off: Power is off.
Steady on: Power is on.
Flashing: Receiving an alert. The faster it flashes, the stronger the signal.
USB Port Use this USB port to charge mobile devices.
MENU SYSTEM
Menus let you set up the system to your own requirements. You can turn different bands on and off and set
specific items such as auto mute.
Press
MENU
to access the Menu system. The screen displays the selection’s current status. For example, if you
press
MENU
and the screen displays Voice: ON, you have the option of turning Voice to OFF.
Use the following keys to navigate the menus:
x
MENU
: Change a menu item setting (press and hold to exit the Menu system).
x
VOL +
: Go to the next Menu item.
x
VOL –
: Go to the previous Menu item.
MENU ITEM WHAT IT DOES SETTINGS
Voice Turns voice alert on or off under the following conditions:
• Type of radar/laser
• Band alarms
On (Default)
Off
- 8 -
MENU ITEM WHAT IT DOES SETTINGS
X Band Turn off to have the detector ignore X Band frequencies (Highway only). On (Default)
Off
K Band Turn off to have the detector ignore K Band frequencies. On (Default)
Off
Ka Band Turn off to have the detector ignore Ka Band frequencies. On (Default)
Off
Laser Turn off to have the detector ignore lasers. On (Default)
Off
POP Mode Detects POP transmissions (very brief transmissions, too fast for some
detectors to hear).
On
Off (Default)
K Band Filter Filters noise from the K band to prevent false detections. On
Off (Default)
TSF Traffic Sensor Filter. Prevents false alarms caused by traffic monitoring
radar systems.
On
Off (Default)
Ka Band Filter Filters noise from the Ka band to prevent false positive readings. On
Off (Default)
K Narrow/
Wide
K Narrow scans for K radar guns used in the US only and reduces false
alarms.
K Narrow
K Wide (Default)
Ka Narrow/
Wide
Ka Narrow scans for Ka radar guns used in the US only and reduces false
alarms. Ka Wide scans Super Wide Ka band.
Ka Narrow (Default)
Ka Wide
Display Lets you turn the voltage display on or off. Select Voltage to turn it on,
or Off to turn it off.
Voltage (Default)
Off
Auto Mute Auto Mute reduces alarm level to 1 after 3 seconds and returns to
normal operation (Auto Mute = OFF) 10 seconds after the alert ends. If
the same alarm sounds within the 10 second period, Auto Mute remains
at level 1. The unit returns to normal operation (Auto Mute = OFF) if a
different band is detected during Auto Mute = ON mode.
On (Default)
Off
Backlight Turns the front key backlight on and off.
Press and hold MUTE/DIM to select a brightness level.
On (Default)
Off
BAT Warning Issues a warning if the vehicle battery power drops below 11V. On
Off (Default)
Self Test Runs a self diagnostic test on the unit to check for faults. On (Default)
Off
Factory Reset Resets all settings to the factory defaults.
There is no confirmation request for reset.
NA
Firmware
Version
Displays the latest firmware version. NA
EXIT Closes the Menu system. NA
BASIC OPERATIONS
HOW DO I ...? TRY THIS...
Turn on the DFR6 Press
POWER
. The unit turns on and runs through an initial self-check. It
displays the different bands and their settings.
The DFR6 turns on automatically when you start the vehicle.
- 9 -
HOW DO I ...? TRY THIS...
Adjust the volume • Press
VOL +
to increase volume. The unit beeps and displays a number
increase.
• Press
VOL –
to decrease volume. The unit beeps and displays a number
decrease.
Mute alarm volume during the
alert
Press
MUTE/DIM
during an audio alarm to mute it. (This is especially useful
in situations where the alert may be prolonged, such as at red lights.)
Change the screen’s brightness Press and hold
MUTE/DIM
. The DFR6 announces the brightness level
(Bright, Dim, Dark, or off) as it changes to that level. Press and hold the key
again to cycle between the brightness levels.
Turn bands on and off Press
MENU
and cycle through the menu options until the band you want to
turn off displays. Press
MENU
again to change that band’s status.
Change Highway to City and
back
Press
CITY
for at least 1 second to alternate between HIGHWAY and CITY
setting.
Update the firmware Refer to http://unidensupport.com for details.
FEATURE DETAILS
HIGHWAY VS CITY MODE
Radar detectors operate with various sensitivity levels. These levels determine the types of signals and signal
ranges (bands) detected. Highway mode is the most sensitive level while City mode is the least sensitive. If the X
band is left on in City mode, a radar detector can pick up many X band signals (such as garage door openers) that
generate false alerts. The DFR6 turns off the X band for City mode. When you are on the highway, there is less
chance of picking up X band false alerts, so the DFR6 keeps the X band on.
Press
CITY
to alternate between HIGHWAY and CITY mode.
POP MODE
In POP mode, the DFR6 can detect short burst from radars that are too fast for many other detectors to catch.
You can turn POP mode on and off.
SCAN DISPLAY
A small dot on the screen indicates that the unit is scanning for signals. This dot travels back and forth in the
middle of the screen.
Scan Display
- - -
mph
C-NoX
.
Elements on the screen vary according to what you turn on
and o in the Menu system
CITY
ALARM PRIORITIES
x Laser signal
x X, K, Ka Band signal
x Vehicle Low Battery Voltage Warning
MAINTENANCE
MAINTAINING THE EQUIPMENT
The DFR6 requires very little physical maintenance. Wipe it with a soft cloth to keep dust from accumulating.
Check the power cord connections to keep them clean and free of corrosion.
- 10 -
UPDATING THE FIRMWARE
Uniden recommends that you update your DFR6’s firmware periodically. Go to www.uniden.com to check if you
have the latest firmware. If you need to update your firmware, refer to DFR6 Firmware Update Guide on www.
uniden.com for details.
TROUBLESHOOTING
IF... TRY THIS...
The unit won’t turn on Check the connections. Be sure they are all secure.
No display or audio. x If no display, check the connections. Be sure they are
all secure.
x If no audio, check if Voice is turned off.
The unit alarms when the vehicle hits bumps. Check the connections. Be sure they are all secure.
The unit alarms briefly in the same location but
no radar source was in view.
There may be a motion sensor or house alarm in use
within range.
The DFR6 did not alert when a police car was in
view.
• The officer may not have radar/laser units turned on.
• Check that the band is turned on. Press
MENU
and
cycle through the options to get to the bands. If the
band is turned off, the OLED will show OFF. Turn the
band on.
The vehicle starts but the DFR6 does not turn
on.
• Verify that the power cord is securely connected to
the unit and inserted into the cigarette lighter jack.
• Change the fuse in the power cord. Unscrew the
cigarette lighter jack to access the fuse.
SPECIFICATIONS
Receiver Type: Antenna Type:
Radar Double Conversion Superheterodyne
Self-Contained Antenna
Radar Linear Polarized E-vector
Vertical
Laser Pulsed Laser Signal Receiver Laser
Front
Convex Condenser Lens
Frequency: Laser
Back
Concave Condenser Lens
X 10.525 GHz Dimensions 110.00 mm (D) x 69.00 mm
(W) x 29.50 mm (H)
K 24.150 GHz Weight 6 oz (170g)
Ka 33.400 - 36.000 GHz Operating Temp. -4° to +185° F (Radar/Laser)
-20° to +85° C (Radar/Laser)
Laser 800 nm - 1100 nm Storage Temp. -22° to +203° F (Radar/Laser)
-30° to +95° C (Radar/Laser)
Detector Type: Operating Power Source DC 11.0 to 16.0 V
Radar Scanning Frequency Discriminator USB Interface USB Specification 2.0/1.1
Laser Pulse Width Discriminator
Alarm
Type
Beep (Detected Band and Signal
strength)
- 11 -
FCC/INDUSTRY CANADA INFORMATION
FCC: AMWUA1601
ICC: 513C-UA1601
FCC Compliance
This device complies with Part 15 of the FCC rules. Operaon is subjected to the following two condions: (1) this device may
not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause
undesired operaon.
Changes or modicaons not expressly approved by the party responsible for compliance could void your authority to operate
the equipment.
Avis de conformité à la FCC : Ce disposif a été testé et s’avère conforme à l’arcle 15 des règlements de la Commission fédérale
des communicaons (FCC). Ce disposif est soumis aux condions suivantes: 1) Ce disposif ne doit pas causer d’interférences
nuisibles et; 2) Il doit pouvoir supporter les parasites qu’il reçoit, incluant les parasites pouvant nuire à son fonconnement.
Tout changement ou modicaon non approuvé expressément par la pare responsable pourrait annuler le droit à l’ulisateur de
faire fonconner cet équipement.
IC Compliance
This device complies with Industry Canada license-exempt RSS standard(s).Operaon is subject to the following two condions:
(1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause
undesired operaon of the device.
Changes or modicaons not expressly approved by the party responsible for compliance could void your authority to operate
the equipment.
Cet appareil est conforme aux normes RSS exemptes de licences d’Industrie Canada. Son fonconnement est soumis aux deux
condions suivantes : (1) cet appareil ne doit pas causer d’interférences nuisibles et (2), il doit pouvoir accepter les interférences,
incluant celles pouvant nuire à son fonconnement normal.
Tout changement ou modicaon non approuvé expressément par la pare responsable pourrait annuler le droit à l’ulisateur de
faire fonconner cet équipement.
ONE-YEAR LIMITED WARRANTY
Keep your receipt! Proof of purchase is required for warranty service.
WARRANTOR: UNIDEN AMERICA CORP. (“Uniden”)
ELEMENTS OF WARRANTY: Uniden warrants, for one year, to the original retail owner, this Uniden Product to be free from
defects in materials and crasmanship with only the limitaons or exclusions set out below.
WARRANTY DURATION: This warranty to the original user shall terminate and be of no further eect 12 months aer the date
of original retail sale. The warranty is invalid if the Product is (A) damaged or not maintained as reasonable or necessary, (B)
modied, altered, or used as part of any conversion kits, subassemblies, or any conguraons not sold by Uniden, (C) improperly
installed, (D) serviced or repaired by someone other than an authorized Uniden service center for a defect or malfuncon covered
by this warranty, (E) used in any conjuncon with equipment or parts or as part of any system not manufactured by Uniden, or (F)
installed or programmed by anyone other than as detailed by the Operang Guide for this product.
STATEMENT OF REMEDY: In the event that the product does not conform to this warranty at any me while this war-ranty is in ef-
fect, warrantor will repair the defect and return it to you without charge for parts, service, or any other cost (except shipping and
handling) incurred by warrantor or its representaves in connecon with the performance of this warranty. THE LIMITED WAR-
RANTY SET FORTH ABOVE IS THE SOLE AND ENTIRE WARRANTY PERTAINING TO THE PRODUCT AND IS IN LIEU OF AND EXCLUDES
ALL OTHER WARRANTIES OF ANY NATURE WHATSOEVER, WHETHER EXPRESS, IMPLIED OR ARISING BY OPERATION OF LAW,
INCLUDING, BUT NOT LIMITED TO ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
THIS WARRANTY DOES NOT COVER OR PROVIDE FOR THE REIMBURSEMENT OR PAYMENT OF INCIDENTAL OR CONSEQUENTIAL
DAMAGES. Some states do not allow this exclusion or limitaon of incidental or consequenal damages so the above limitaon or
exclusion may not apply to you.
LEGAL REMEDIES: This warranty gives you specic legal rights, and you may also have other rights which vary from state to state.
This warranty is void outside the United States of America.
PROCEDURE FOR OBTAINING PERFORMANCE OF WARRANTY: If, aer following the instrucons in this Operang Guide, you are
certain that the Product is defecve, pack the Product carefully (preferably in its original packaging). Include evidence of original
purchase and a note describing the defect that has caused you to return it. The Product should be shipped freight prepaid, by
traceable means, or delivered, to warrantor at:
Uniden America Corporaon
C/O Saddle Creek
743 Henriea Creek Rd., Suite 100
Roanoke, TX 76262
POP Mode is a trademark of MPH Industries, Inc.
Spectre I and Spectre IV are trademarks of Stealth Micro Systems Pty. Ltd.
VG2 is a trademark of TechniSonic Industries LTD.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12

Uniden DFR6 Manuel utilisateur

DFR6
Uniden
Marque
Uniden
Modèle
DFR6
Catégorie
Détecteurs radar / lidar
Taper
Manuel utilisateur
Télécharger le PDF
rapport

dans d''autres langues

Documents connexes

Autres documents