Sony CDX-GT929U Le manuel du propriétaire

©

2008 Sony Corporation

3-283-552-11 (1)

CDX-GT929U

To cancel the demonstration (Demo) display, see page 20.

Zum Deaktivieren der Demo-Anzeige (Demo) schlagen Sie bitte auf Seite 21 nach.

Pour annuler la démonstration (Demo), reportez-vous à la page 20.

Per annullare la dimostrazione (Demo), vedere pagina 21.

Om de demonstratie (Demo) te annuleren, zie pagina 21.

Operating Instructions

Bedienungsanleitung

Mode d’emploi

Istruzioni per l’uso

Gebruiksaanwijzing

GB

DE

FR

IT

NL

FM/MW/LW Compact Disc Player

FM

/

MW

/

LW

Compact Disc Player

2

“ATRAC”, “ATRAC AD”, SonicStage and their

logos are trademarks of Sony Corporation.

“WALKMAN” and “WALKMAN” logo are

registered trademarks of Sony Corporation.

For installation and connections, see the

supplied installation/connections manual.

This label is located on the bottom of the

chassis.

Notice for the customer in the countries

applying EU Directives

The manufacturer of this product is Sony

Corporation, 1-7-1 Konan, Minato-ku, Tokyo,

Japan.

The Authorized Representative for EMC and

product safety is Sony Deutschland GmbH,

Hedelfinger Strasse 61, 70327 Stuttgart,

Germany. For any service or guarantee matters

please refer to the addresses given in separate

service or guarantee documents.

Disposal of Old Electrical &

Electronic Equipment (Applicable in

the European Union and other

European countries with separate

collection systems)

This symbol on the product or on its

packaging indicates that this product shall not be treated

as household waste. Instead it shall be handed over to the

applicable collection point for the recycling of electrical

and electronic equipment. By ensuring this product is

disposed of correctly, you will help prevent potential

negative consequences for the environment and human

health, which could otherwise be caused by inappropriate

waste handling of this product. The recycling of materials

will help to conserve natural resources. For more detailed

information about recycling of this product, please contact

your local Civic Office, your household waste disposal

service or the shop where you purchased the product.

Applicable accessory: Remote commander

Warning if your car’s ignition has no

ACC position

Be sure to set the Auto Off function (page 20).

The unit will shut off completely and

automatically in the set time after the unit is

turned off, which prevents battery drain.

If you do not set the Auto Off function, press

and hold (OFF) until the display disappears

each time you turn the ignition off.

Disposal of waste batteries

(applicable in the European Union

and other European countries with

separate collection systems)

This symbol on the battery or on the packaging indicates

that the battery provided with this product shall not be

treated as household waste. By ensuring these batteries are

disposed of correctly, you will help prevent potentially

negative consequences for the environment and human

health which could otherwise be caused by inappropriate

waste handling of the battery. The recycling of the

materials will help to conserve natural resources.

In case of products that for safety, performance or data

integrity reasons require a permanent connection with an

incorporated battery, this battery should be replaced by

qualified service staff only. To ensure that the battery will

be treated properly, hand over the product at end-of-life to

the applicable collection point for the recycling of

electrical and electronic equipment.

For all other batteries, please view the section on how to

remove the battery from the product safely. Hand the

battery over to the applicable collection point for the

recycling of waste batteries.

For more detailed information about recycling of this

product or battery, please contact your local Civic Office,

your household waste disposal service or the shop where

you purchased the product.

Microsoft, Windows Media,

and the Windows logo are

trademarks or registered

trademarks of Microsoft

Corporation in the United States and/or other

countries.

3

Table of Contents

Welcome ! . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Getting Started

Resetting the unit. . . . . . . . . . . . . . . . . . . . . . . . 5

Preparing the card remote commander . . . . . . . 5

Setting the clock . . . . . . . . . . . . . . . . . . . . . . . . 5

Detaching the front panel . . . . . . . . . . . . . . . . . 6

Attaching the front panel . . . . . . . . . . . . . . . 6

Inserting the disc in the unit . . . . . . . . . . . . . . . 6

Ejecting the disc . . . . . . . . . . . . . . . . . . . . . . 6

Adjusting the angle of the front panel . . . . . . . . 7

Location of controls and basic

operations

Main unit. . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Card remote commander RM-X154 . . . . . . 10

Searching for a track

— Quick-BrowZer . . . . . . . . . . . . . . . . . . . 12

Searching by skip items

— Jump mode. . . . . . . . . . . . . . . . . . . . . . . 13

CD

Display items . . . . . . . . . . . . . . . . . . . . . . . 14

Repeat play . . . . . . . . . . . . . . . . . . . . . . . . . 14

Shuffle play. . . . . . . . . . . . . . . . . . . . . . . . . 14

Radio

Storing and receiving stations . . . . . . . . . . . . . 14

Storing automatically — BTM . . . . . . . . . . 14

Storing manually. . . . . . . . . . . . . . . . . . . . . 14

Receiving the stored stations . . . . . . . . . . . 14

Tuning automatically . . . . . . . . . . . . . . . . . 15

Receiving a station through a list

— LIST. . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

RDS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Setting AF and TA . . . . . . . . . . . . . . . . . . . 16

Selecting PTY. . . . . . . . . . . . . . . . . . . . . . . 16

Setting CT. . . . . . . . . . . . . . . . . . . . . . . . . . 17

USB devices

USB device playback . . . . . . . . . . . . . . . . . 17

Display items . . . . . . . . . . . . . . . . . . . . . . . 17

Listening to music on a Mass Storage

Class type audio device. . . . . . . . . . . . . . . . 18

Listening to music on a “Walkman”

(ATRAC Audio Device). . . . . . . . . . . . . . . 18

Other functions

Changing the sound settings . . . . . . . . . . . . . . 19

Adjusting the sound characteristics . . . . . . 19

Customizing the equalizer curve

— EQ3 Tune . . . . . . . . . . . . . . . . . . . . . . . 19

Adjusting setup items — MENU . . . . . . . . . . 20

Using optional equipment. . . . . . . . . . . . . . . . 20

Auxiliary audio equipment. . . . . . . . . . . . . 20

CD/MD changer. . . . . . . . . . . . . . . . . . . . . 21

Rotary commander RM-X4S . . . . . . . . . . . 22

Additional Information

Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Notes on discs . . . . . . . . . . . . . . . . . . . . . . 23

About USB devices . . . . . . . . . . . . . . . . . . 24

Playback order of MP3/WMA/AAC files

(CD-R/RW or Mass Storage Class) . . . . . . 24

About MP3 files . . . . . . . . . . . . . . . . . . . . . 24

About WMA files. . . . . . . . . . . . . . . . . . . . 24

About AAC files . . . . . . . . . . . . . . . . . . . . 25

Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . 25

Removing the unit. . . . . . . . . . . . . . . . . . . . . . 25

Specifications . . . . . . . . . . . . . . . . . . . . . . . . . 26

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . 27

Error displays/Messages. . . . . . . . . . . . . . . 29

4

Welcome !

Thank you for purchasing this Sony Compact

Disc Player. You can enjoy your drive with the

following functions.

• CD playback

You can play CD-DA (also containing CD

TEXT), CD-R/CD-RW (MP3/WMA/AAC files

(page 23)).

• Radio reception

– You can store up to 6 stations per band (FM1,

FM2, FM3, MW and LW).

– BTM (Best Tuning Memory): The unit selects

strong signal stations and stores them.

• RDS services

– You can use FM station with Radio Data

System (RDS).

• Search function

– Quick-BrowZer: You can quickly and easily

search for a track in the CD and USB device

connected to this unit (page 12).

• Sound adjustment

– EQ3 parametric: You can choose any one

of 7 preset equalizer curves, and adjust as

desired.

– DSO (Dynamic Soundstage Organizer):

Creates a more ambient sound field, using

virtual speaker synthesis, to enhance the

sound of speakers, even if they are installed

low in the door.

– Digital Music Plus (DM+): Improves

digitally compressed sound, such as MP3.

• Image setting

You can set various display images on the unit.

• Optional device operation

– USB device: A Mass Storage Class USB

device or “Walkman” (ATRAC Audio

Device) can be connected to the rear USB

terminal. For details on usable devices, please

refer to About USB devices (page 24) or the

Sony support website (page 30).

– CD/MD changers: CD/MD changers can be

connected to the Sony BUS at the rear of the

unit.

• Auxiliary equipment connection

An AUX input jack on the front of the unit

allows connection of a portable audio device.

Type of discs Label on the disc

CD-DA

MP3

WMA

AAC

5

Getting Started

Resetting the unit

Before operating the unit for the first time, or

after replacing the car battery or changing the

connections, you must reset the unit.

Detach the front panel and press the RESET

button with a pointed object, such as a ball-point

pen.

Note

Pressing the RESET button will erase the clock setting

and some stored contents.

Preparing the card remote

commander

Before using the card remote commander for the

first time, remove the insulation film.

Tip

For how to replace the battery, see “Replacing the

lithium battery of the card remote commander” on

page 25.

Setting the clock

The clock uses a 24-hour digital indication.

1 Press and hold the multi way encoder.

2 Rotate the multi way encoder until

“Clock Adjust” appears, then press it.

The clock adjustment display appears.

3 Rotate the multi way encoder to set

the hour and minute.

To move the digital indication, push the multi

way encoder left/right.

4 After setting the minute, press the

multi way encoder.

The clock starts.

Tip

You can set the clock automatically with the RDS

feature (page 17).

RESET button

6

Detaching the front panel

You can detach the front panel of this unit to

prevent theft.

Caution alarm

If you turn the ignition switch to the OFF

position without detaching the front panel, the

caution alarm will sound for a few seconds.

The alarm will only sound if the built-in

amplifier is used.

1 Press (OFF).

The unit is turned off.

2 Press .

The left side of front panel is released.

3 Slide the front panel to the left, then

gently pull out the front panel towards

you.

Notes

• Do not drop or put excessive pressure on the front

panel and display window.

• Do not subject the front panel to heat/high

temperature or moisture. Avoid leaving it in a parked

car or on a dashboard/rear tray.

Attaching the front panel

Place the hole A of the front panel onto the

spindle B on the unit, then lightly push the left

side in.

Press (SOURCE) on the unit (or insert a disc) to

operate the unit.

Note

Do not put anything on the inner surface of the front

panel.

Inserting the disc in the unit

1 Press Z.

The front panel slides down automatically.

2 Insert the disc (label side up).

The front panel slides up automatically, then

playback starts automatically.

Ejecting the disc

1 Press Z.

The front panel slides down automatically,

then the disc is ejected.

2 Press Z to close the front panel.

Note

The front panel slides up automatically after 15

seconds of the front panel sliding down.

(OFF)

B

A

7

Adjusting the angle of the front

panel

1 Press and hold (ANGLE) repeatedly

until the front panel is angled

accordingly.

The front panel can be set to 3 positions.

To return the front panel to its default position,

press and hold (ANGLE) repeatedly until the

front panel is returned to its default position.

Tips

• After the front panel slides down (to insert the disc),

it returns to the position you set again automatically.

• The front panel angle you set is stored in the unit.

When turning the ignition off, the angle returns to its

default position, then turning the ignition on, the front

panel is angled you set.

(ANGLE)

8

Location of controls and basic operations

Main unit

This section contains instructions on the location

of controls and basic operations. For details, see

the respective pages.

For USB device operation, see “USB devices” on

page 17, or for optional device (CD/MD changer,

etc.) operation, see “Using optional equipment”

on page 20.

The corresponding buttons on the card remote

commander control the same functions as those

on the unit.

A (LIST/BROWSE)/ (BACK) control

Push (LIST/BROWSE) up: to list up

(Radio); enter the Quick-BrowZer mode

(CD/USB).

Push (BACK) down: return to the previous

display.

B MODE button page 14

To select the radio band (FM/MW/LW)*

1

;

select the play mode of ATRAC Audio

Device.

C SHUF (shuffle) button page 14, 18

D Multi way encoder

Rotate to: Adjust the volume/select a menu

item.

Push up/down/left/right to: Select a menu

item.

Press to: Enter sound setting/apply a setting.

Press and hold to: Enter menu.

CD/USB:

Push up/down to:

– Skip albums (push)*

2

.

– Skip albums continuously (push and

hold)*

2

.

Push left/right to:

– Skip tracks (push).

– Skip tracks continuously (push, then push

again within about 2 seconds and hold).

– Reverse/fast-forward a track (push and

hold).

Radio:

Push up/down to:

– Receive stored station.

Push left/right to:

– Tune in stations automatically (push).

– Find a station manually (push and hold).

OFF

MODE

SOURCE

PUSH ENTER

/

SOUND

/

MENU

AUX

SHUF

DSPL

/

PTY

BACK

LIST/

BROWSE

AF/TA

123 645 7

89 q

s

q

d

q

;

q

a

q

f

q

g

9

E Disc slot page 6

To insert the disc.

F Display window

G Z (eject)/ANGLE button page 7

To eject the disc/slide down the front panel

(press); angle the front panel in 3 positions

(press and hold).

H (front panel release) button page 6

I SOURCE button

To power on; change the source (Radio/CD/

USB/AUX)*

1

.

J DSPL (display)/PTY (Program Type)

button page 14, 16

To change display items (press); select PTY

in RDS (press and hold).

K RESET button (Location behind the front

panel) page 5

L AF (Alternative Frequencies)/

TA (Traffic Announcement) button

page 16

To set AF and TA in RDS.

M OFF button

To power off; stop the source.

N AUX input jack page 20

To connect a portable audio device.

O Receptor for the card remote

commander

*1 In the case of a CD/MD changer being connected;

when (SOURCE) is pressed, the connected device

(“MD”) will appear in the display, depending on

which device is connected. Furthermore, if

(MODE) is pressed, you can switch the changer.

*2 When an MP3/WMA/AAC is played.

10

Card remote commander

RM-X154

Remove the insulation film before use (page 5).

A OFF button

To power off; stop the source.

B SOURCE button

To power on; change the source (Radio/CD/

USB/AUX).

C MENU button

To enter menu.

D ENTER button

To apply a setting.

E </, (SEEK –/+) buttons

The same as pushing the multi way encoder

left/right on the unit.

Setup, sound setting, etc., can be operated by

< ,.

F DSPL (display)/PTY (Program Type)

button

To change display items (press); select PTY

in RDS (press and hold).

G VOL (volume) +/– button

To adjust volume.

OFF

DSPL/PTY

REP SHUF

MENU LIST

SCRL

SOURCE SOUND

MODE

PAU SE

132

465

ATT

VOL

+

–

+

–

ENTER

2

qa

9

3

0

1

4

5

6

8

7

qf

qs

qd

11

H ATT (attenuate) button

To attenuate the sound. To cancel, press

again.

I SOUND button

To enter sound setting.

J MODE button

To select the radio band (FM/MW/LW);

select the play mode of ATRAC Audio

Device.

K LIST button

To list up (Radio); enter the Quick-BrowZer

mode (CD/USB).

L M/m (+/–) buttons

The same as pushing the multi way encoder

up/down on the unit.

Setup, sound setting, etc., can be operated by

M m.

M SCRL (scroll) button

To scroll the display item.

N Number buttons

CD/USB:

(1): REP page 14, 18

(2): SHUF page 14, 18

(6): PAUSE

To pause playback. To cancel, press

again.

Radio:

To receive stored stations (press); store

stations (press and hold).

Note

If the unit is turned off and the display disappears, it

cannot be operated with the card remote commander

unless (SOURCE) on the unit is pressed, or a disc is

inserted to activate the unit first.

12

Searching for a track — Quick-BrowZer

You can search for a track in a CD or USB device (“Walkman”/Mass Storage Class) easily by category.

1 Push (LIST/BROWSE) up.

The unit enters the Quick-BrowZer mode, and the list of search categories appears.

Display items differ, depending on the type of device or disc.

2 Rotate the multi way encoder to select the desired search category, then press it to

confirm.

3 Repeat step 2 until the desired track is selected.

Playback starts.

To return to the previous display

Push (BACK) down.

To exit the Quick-BrowZer mode

Push (LIST/BROWSE) up.

Notes

• When entering the Quick-BrowZer mode, the repeat/shuffle setting is canceled.

• Depending on the USB device, display items may not appear correctly.

• Depending on the USB device, no sound may output during the Quick-BrowZer mode.

MODE

SOURCE

BACK

LIST/

BROWSE

SHUF

DSPL

/

PTY

Multi way encoder:

To select the item (rotate); confirm the item (press).

(LIST/BROWSE):

To enter/exit the Quick-BrowZer mode.

(BACK):

To return to the previous display.

13

Searching by skip items — Jump mode

When many items are in category, you can search the desired item quickly.

1 Push the multi way encoder right, in Quick-BrowZer mode.

The following display appears.

A Current item number

B Total item number in the current layer

C Item name

2 Rotate the multi way encoder to select the desired item, or one near the desired item.

It skips in steps of 10% of the total item number.

3 Press the multi way encoder.

The display returns to the Quick-BrowZer mode and the selected item appears.

4 Rotate the multi way encoder to select the desired item and press it.

Playback starts if the selected item is a track.

To cancel Jump mode

Push (BACK) or push the multi way encoder left.

A

B

C

14

CD

For details on selecting a CD/MD changer, see

page 21.

Display items

Example: when you set Info (information) mode

to “All” (page 20).

A Source (CD/WMA/MP3/AAC) indication

B Clock

C Album number/Track number/Elapsed

playing time, Track name, Disc name, Artist

name, Album name

To change display items C, press (DSPL).

Tip

Displayed items will differ, depending on the disc type,

recorded format and settings. For details on MP3/

WMA/AAC, see page 24.

Repeat play

1 During playback, press (1) (REP) on

the card remote commander until the

desired setting appears.

* When an MP3/WMA/AAC is played.

To return to normal play mode, select “Repeat

off.”

Shuffle play

1 During playback, press (SHUF)

repeatedly until the desired setting

appears.

* When an MP3/WMA/AAC is played.

To return to normal play mode, select “Shuffle

off.”

Radio

Storing and receiving stations

Caution

When tuning in stations while driving, use Best

Tuning Memory (BTM) to prevent an accident.

Storing automatically — BTM

1 Press (SOURCE) repeatedly until

“TUNER” appears.

To change the band, press (MODE)

repeatedly. You can select from FM1, FM2,

FM3, MW or LW.

2 Press and hold the multi way encoder.

3 Rotate the multi way encoder until

“BTM” appears, then press it.

The unit stores stations in order of frequency

in the preset list.

A beep sounds when the setting is stored.

Storing manually

1 While receiving the station that you

want to store, push (LIST) up.

The preset list appears.

2 Rotate the multi way encoder to select

the preset number.

3 Push and hold the multi way encoder

until “MEM” appears.

(with the card remote commander)

1 While receiving the station that you

want to store, press and hold a

number button ((1) to (6)) until

“MEM” appears.

Note

If you try to store another station on the same number

button, the previously stored station will be replaced.

Tip

When an RDS station is stored, the AF/TA setting is

also stored (page 16).

Receiving the stored stations

1 Select the band, then push the multi

way encoder up/down.

(with the card remote commander)

1 Select the band, then press a number

button ((1) to (6)).

Select To play

Repeat Track track repeatedly.

Repeat Album* album repeatedly.

Select To play

Shuffle Album* album in random order.

Shuffle Disc disc in random order.

A

B

C

15

Tuning automatically

1 Select the band, then push the multi

way encoder left/right to search for the

station.

Scanning stops when the unit receives a

station. Repeat this procedure until the

desired station is received.

Tip

If you know the frequency of the station you want to

listen to, push and hold the multi way encoder left/right

to quickly locate the approximate frequency, then push

the multi way encoder left/right repeatedly to fine

adjust to the desired frequency (manual tuning).

Receiving a station through a list

— LIST

You can list up the frequency.

1 Select the band, then push (LIST) up.

The preset list appears.

2 Rotate the multi way encoder until the

desired station appears.

3 Press the multi way encoder to receive

the station.

The display returns to normal reception

mode.

RDS

Overview

FM stations with Radio Data System (RDS)

service send inaudible digital information along

with the regular radio program signal.

Display items

Example: when you set Info (information) mode

to “All” (page 20).

A Radio band

B TP/TA/AF*

1

C Clock

D Preset number

E Frequency*

2

(Programme service name),

RDS data

*1 When Info (Information) “All” is set:

– “TP” lights up while “TP” is received.

– “TA”/“AF” lights up while “TA/AF” is on.

*2 While receiving the RDS station, “RDS” is

displayed on the left of the frequency indication.

RDS services

This unit automatically provides RDS services as

follows:

continue to next page t

AF (Alternative Frequencies)

Selects and retunes the station with the

strongest signal in a network. By using this

function, you can continuously listen to the

same program during a long-distance drive

without having to retune the same station

manually.

TA (Traffic Announcement)/TP (Traffic

Program)

Provides current traffic information/programs.

Any information/program received, will

interrupt the currently selected source.

PTY (Program Types)

Displays the currently received program type.

Also searches your selected program type.

CT (Clock Time)

The CT data from the RDS transmission sets

the clock.

A B C

D

E

16

Notes

• Depending on the country/region, not all RDS

functions may be available.

• RDS will not work if the signal strength is too weak,

or if the station you are tuned to is not transmitting

RDS data.

Setting AF and TA

1 Press (AF/TA) repeatedly until the

desired setting appears.

Storing RDS stations with the AF and

TA setting

You can preset RDS stations along with the AF/

TA setting. If you use the BTM function, only

RDS stations are stored with the same AF/TA

setting.

If you preset manually, you can preset both RDS

and non-RDS stations with the AF/TA setting for

each.

1 Set AF/TA, then store the station with BTM or

manually.

Receiving emergency

announcements

With AF or TA on, the emergency

announcements will automatically interrupt the

currently selected source.

Tip

If you adjust the volume level during a traffic

announcement, that level will be stored into memory

for subsequent traffic announcements, independently

from the regular volume level.

Staying with one regional program

— Regional

When the AF function is on: this unit’s factory

setting restricts reception to a specific region, so

you will not be switched to another regional

station with a stronger frequency.

If you leave this regional program’s reception

area, set “Regional off” in setup during FM

reception (page 20).

Note

This function does not work in the UK and in some

other areas.

Local Link function (UK only)

This function enables you to select other local

stations in the area, even if they are not stored on

your number buttons.

1 During FM reception, press a number button

((1) to (6)) on which a local station is stored.

2 Within 5 seconds, press again a number button

of the local station.

Repeat this procedure until the local station is

received.

Selecting PTY

1 Press and hold (DSPL) (PTY) during

FM reception.

The current program type name appears if the

station is transmitting PTY data.

2 Rotate the multi way encoder until the

desired program type appears.

3 Press the multi way encoder.

The unit starts to search for a station

broadcasting the selected program type.

Type of programs

Note

You cannot use this function in countries/regions

where no PTY data is available.

Select To

AF on activate AF and deactivate TA.

TA on activate TA and deactivate AF.

AF/TA on activate both AF and TA.

AF/TA off deactivate both AF and TA.

News (News), Current Affairs (Current

Affairs), Information (Information), Sport

(Sports), Education (Education), Drama

(Drama), Cultures (Culture), Science

(Science), Varied Speech (Varied),

Pop Music (Popular Music), Rock Music

(Rock Music), Easy Listening (Easy

Listening), Light Classics M (Light

Classical), Serious Classics (Classical),

Other Music (Other Music Type), Weather &

Metr (Weather), Finance (Finance),

Children’s Progs (Children’s Programmes),

Social Affairs (Social Affairs), Religion

(Religion), Phone In (Phone In), Travel &

Touring (Travel), Leisure & Hobby

(Leisure), Jazz Music (Jazz Music),

Country Music (Country Music),

National Music (National Music),

Oldies Music (Oldies Music), Folk Music

(Folk Music), Documentary (Documentary)

17

Setting CT

1 Set “CT on” in setup (page 20).

Notes

• The CT function may not work even though an RDS

station is being received.

• There might be a difference between the time set by

the CT function and the actual time.

USB devices

USB device playback

1 Remove the USB cap from the USB

connector and connect the USB

device to the USB connector.

Playback starts.

If a USB device is already connected, to start

playback, press (SOURCE) repeatedly until

“USB” appears.

Press (OFF) to stop playback.

Notes

• Before removing a USB device, be sure to stop

playback first. If you remove your USB device during

playback, data in the USB device may be damaged.

• Do not use USB devices so large or heavy that they

may fall down due to vibration, or cause a loose

connection.

Display items

Example: when you set Info (information) mode

to “All” (page 20).

A ATRAC/WMA/MP3/AAC indication*

1

WMA/MP3/AAC indication*

2

B Clock

C Folder number/Track number/Elapsed

playing time, Track name, Artist name,

Album name

*1 When an ATRAC Audio Device is connected.

*2 When a Mass Storage Class Device is connected.

continue to next page t

A

B

C

18

To change display items C, press (DSPL).

Tip

Displayed items will differ, depending on the recorded

format and settings. For details on MP3/WMA/AAC/

ATRAC, see page 25.

Note

The display differs depending on the Mass Storage

Class type USB device, and ATRAC Audio Device.

Listening to music on a Mass

Storage Class type audio device

Repeat and shuffle play

1 During playback, press (1) (REP) on the card

remote commander or (SHUF) on the unit

repeatedly until the desired setting appears.

To return to normal play mode, select “Repeat

off” or “Shuffle off.”

Listening to music on a “Walkman”

(ATRAC Audio Device)

1 During playback, press (MODE)

repeatedly until the desired setting

appears.

The item changes as follows:

Album Mode t Track Mode t Genre

Mode t Playlist Mode* t Artist Mode

* May not appear depending on the device.

Repeat and shuffle play

1 During playback, press (1) (REP) on the card

remote commander or (SHUF) on the unit

repeatedly until the desired setting appears.

To return to normal play mode, select “Repeat

off” or “Shuffle off.”

Select To play

Repeat Track track repeatedly.

Repeat Album album repeatedly.

Shuffle Album album in random order.

Shuffle Device device in random order.

Select To play

Repeat Track track repeatedly.

Repeat Album album repeatedly.

Repeat Artist artist repeatedly.

Repeat Playlist playlist repeatedly.

Repeat Genre genre repeatedly.

Shuffle Album album in random order.

Shuffle Artist artist in random order.

Shuffle Playlist playlist in random order.

Shuffle Genre genre in random order.

Shuffle Device device in random order.

19

Other functions

Changing the sound settings

Adjusting the sound

characteristics

1 Press the multi way encoder.

2 Rotate the multi way encoder until the

desired menu item appears, then

press it.

3 Rotate the multi way encoder to select

the setting, then press it.

The setting is complete.

After 3 seconds, the setting is complete and

the display returns to normal play/reception

mode.

The following items can be set (follow the page

reference for details):

“

z” indicates the default settings.

*1 When CD/USB source is activated.

*2 When AUX source is activated.

Customizing the equalizer curve

— EQ3 Tune

“Custom” of EQ3 allows you to make your own

equalizer settings.

1 Select a source, then press the multi

way encoder.

2 Rotate the multi way encoder to select

“EQ3 parametric,” then press it.

3 Rotate the multi way encoder to select

“Custom,” then push it right.

4 Rotate the multi way encoder to select

“EQ3 Mode Tune,” then press it.

5 Rotate the multi way encoder to select

the desired frequency range from

“LOW,” “MID” or “HI,” then press it.

6 Rotate the multi way encoder to select

the center frequency you wish to

adjust, then press it.

Selectable frequency in each range:

LOW: 60 Hz or 100 Hz

MID: 500 Hz or 1.0 kHz

HI: 10.0 kHz or 12.5 kHz

7 Rotate the multi way encoder to adjust

the equalizer curve.

The volume level is adjustable in 1 dB steps,

from –10 dB to +10 dB.

8 Press the multi way encoder.

Repeat steps 5 to 8 to adjust other frequency

ranges.

9 Push (BACK) down twice.

The display returns to normal play/reception

mode.

To restore the factory-set equalizer curve,

select “EQ3 Mode Initialize” and “Yes” in

step 4.

Tip

Other equalizer types are also adjustable.

EQ3 parametric

To select an equalizer type: “Xplod,” “Vocal,”

“Edge,” “Cruise,” “Space,” “Gravity,” “Custom”

or “off” (

z).

DM+*

1

To set the DM+ function “on” (z) or “off”

(page 4).

DSO

To select the DSO mode: “1,” “2,” “3” or “off”

(

z). The larger the number, the more enhanced

the effect.

Balance

To adjust the balance between the right and left

speakers: “R10” – “0” (

z) – “L10”

Fader

To adjust the balance between the front and rear

speakers: “F10” – “0” (

z) – “R10”

Subwoofer

To adjust the subwoofer volume: “+10” – “0”

(

z) – “–10”

(“– ∞” is displayed at the lowest setting.)

LPF (Low Pass Filter)

To select the subwoofer cut-off frequency: “off”

(

z), “125Hz” or “78Hz.”

AUX Level*

2

To adjust the volume level for each connected

auxiliary equipment. This setting negates the

need to adjust the volume level between sources

(page 20).

Adjustable level: “+18 dB” – “0 dB” (

z) –

“–8 dB”

20

Adjusting setup items — MENU

1 Press and hold the multi way encoder.

2 Rotate the multi way encoder until the

desired menu item appears, then

press it.

3 Rotate the multi way encoder to select

the setting, then press it.

The setting is complete.

4 Push (BACK) down.

The display returns to normal play/reception

mode.

The following items can be set (follow the page

reference for details):

“

z” indicates the default settings.

Setup

Display

Receive Mode

Using optional equipment

Auxiliary audio equipment

By connecting an optional portable audio device

to the AUX input jack (stereo mini jack) on the

unit and then simply selecting the source, you

can listen on your car speakers. The volume level

is adjustable for any difference between the unit

and the portable audio device. Follow the

procedure below:

Connecting the portable audio

device

1 Turn off the portable audio device.

Clock Adjust (page 5)

CT (Clock Time)

To set “on” or “off” (

z) (page 15, 17).

Beep

To set “on” (z) or “off.”

RM (Rotary Commander)

To change the operative direction of the rotary

commander controls.

– “NORM” (

z): to use the rotary commander in

the factory-set position.

– “REV”: when you mount the rotary

commander on the right side of the steering

column.

Auto off

To shut off automatically after a desired time

when the unit is turned off: “NO” (

z), “30 sec,”

“30 min” or “60 min.”

Demo

(Demonstration)

To set “on” (z) or “off.”

Image

To set various display images.

– “Movie 1 (

z) – 3”: to display a movie.

– “SA 1 – 3”: to display the Spectrum Analyzer.

– “Wall.P 1 – 3”: to display a wallpaper.

– “off”: to not display any image.

Auto Image

To set various display images.

– “All”: to step repeatedly through the display

images in all display modes.

–“Movie” (

z): to display a movie.

– “SA”: to display the Spectrum Analyzer.

– “off”: to not display any image.

Info (Information)

To display the items (depending on the source,

etc.).

–“Simple” (

z): to not display any items.

– “All”: to display all items.

– “Clear”: to have items automatically

disappear.

Dimmer

To change the brightness of the display.

–“Auto” (

z): to dim the display automatically

when you turn lights on.

– “on”: to dim the display.

– “off”: to deactivate the dimmer.

Illumination

To change the illumination color: “Blue” (

z),

“Red” or “Green.”

Auto Scroll

To scroll long displayed item automatically

when the disc/album/group/track is changed.

–“on” (

z): to scroll.

– “off”: to not scroll.

Local (Local seek mode)

–“off” (

z): to tune normal reception.

– “on”: to only tune into stations with stronger

signals.

Mono* (Monaural mode)

To improve poor FM reception, select monaural

reception mode.

–“off” (

z): to hear stereo broadcast in stereo.

– “on”: to hear stereo broadcasts in monaural.

Regional

To set “on” (

z) or “off” (page 16).

BTM (page 14)

* When FM is received.

La page charge ...

Sony CDX-GT929U Le manuel du propriétaire

Sony CDX-GT929U Le manuel du propriétaire

dans d''autres langues

Documents connexes