Sony cdx gt930ui Le manuel du propriétaire

Operating Instructions

Bedienungsanleitung

Mode d’emploi

Istruzioni per l’uso

Gebruiksaanwijzing

DE

GB

4-122-158-41 (1)

CDX-GT930UI

FR

IT

NL

To cancel the demonstration (Demo) display, see page 6.

Zum Deaktivieren der Demo-Anzeige (Demo) schlagen Sie bitte auf Seite 6 nach.

Pour annuler la demonstration (Demo), reportez-vous a la page 6.

Per annullare la dimostrazione (Demo), vedere pagina 6.

Om de demonstratie (Demo) te annuleren, zie pagina 6.

FM/MW/LW Compact Disc Player

FM/MW/LW

Compact Disc Player

2

ZAPPIN is a trademark of Sony Corporation.

iPod is a trademark of Apple Inc., registered in

the U.S. and other countries.

iPhone is a trademark of Apple Inc.

For installation and connections, see the

supplied installation/connections manual.

This label is located on the bottom of the

chassis.

Notice for customers: the following

information is only applicable to

equipment sold in countries applying

EU Directives

The manufacturer of this product is Sony

Corporation, 1-7-1 Konan, Minato-ku, Tokyo,

Japan. The Authorized Representative for EMC

and product safety is Sony Deutschland GmbH,

Hedelfinger Strasse 61, 70327 Stuttgart,

Germany. For any service or guarantee matters

please refer to the addresses given in separate

service or guarantee documents.

Disposal of Old Electrical &

Electronic Equipment (Applicable in

the European Union and other

European countries with separate

collection systems)

This symbol on the product or on its

packaging indicates that this product shall not be treated

as household waste. Instead it shall be handed over to the

applicable collection point for the recycling of electrical

and electronic equipment. By ensuring this product is

disposed of correctly, you will help prevent potential

negative consequences for the environment and human

health, which could otherwise be caused by inappropriate

waste handling of this product. The recycling of materials

will help to conserve natural resources. For more detailed

information about recycling of this product, please contact

your local Civic Office, your household waste disposal

service or the shop where you purchased the product.

Applicable accessory: Remote commander

Disposal of waste batteries

(applicable in the European Union

and other European countries with

separate collection systems)

This symbol on the battery or on the packaging indicates

that the battery provided with this product shall not be

treated as household waste. By ensuring these batteries are

disposed of correctly, you will help prevent potentially

negative consequences for the environment and human

health which could otherwise be caused by inappropriate

waste handling of the battery. The recycling of the

materials will help to conserve natural resources.

In case of products that for safety, performance or data

integrity reasons require a permanent connection with an

incorporated battery, this battery should be replaced by

qualified service staff only. To ensure that the battery will

be treated properly, hand over the product at end-of-life to

the applicable collection point for the recycling of

electrical and electronic equipment.

For all other batteries, please view the section on how to

remove the battery from the product safely. Hand the

battery over to the applicable collection point for the

recycling of waste batteries.

For more detailed information about recycling of this

product or battery, please contact your local Civic Office,

your household waste disposal service or the shop where

you purchased the product.

Windows Media, and the

Windows logo are trademarks

or registered trademarks of

Microsoft Corporation in the

United States and/or other countries.

MPEG Layer-3 audio coding technology and

patents licensed from Fraunhofer IIS and Thomson.

This product is protected by certain intellectual

property rights of Microsoft Corporation. Use or

distribution of such technology outside of this

product is prohibited without a license from

Microsoft or an authorized Microsoft subsidiary.

3

Warning if your car’s ignition has no

ACC position

Be sure to set the Auto Off function (page 22).

The unit will shut off completely and

automatically in the set time after the unit is

turned off, which prevents battery drain.

If you do not set the Auto Off function, press

and hold (OFF) until the display disappears

each time you turn the ignition off.

Content providers are using the digital rights

management technology for Windows Media

contained in this device (“WM-DRM”) to protect

the integrity of their content (“Secure Content”) so

that their intellectual property, including copyright,

in such content is not misappropriated.

This device uses WM-DRM software to play

Secure Content (“WM-DRM Software”). If the

security of the WM-DRM Software in this device

has been compromised, owners of Secure Content

(“Secure Content Owners”) may request that

Microsoft revoke the WM-DRM Software’s right

to acquire new licenses to copy, display and/or

play Secure Content. Revocation does not alter the

WM-DRM Software’s ability to play unprotected

content. A list of revoked WM-DRM Software is

sent to your device whenever you download a

license for Secure Content from the Internet or

from a PC. Microsoft may, in conjunction with

such license, also download revocation lists onto

your device on behalf of Secure Content Owners.

4

Table of Contents

Getting Started

Playable discs on this unit . . . . . . . . . . . . . . . . . 6

Resetting the unit. . . . . . . . . . . . . . . . . . . . . . . . 6

Canceling the DEMO mode . . . . . . . . . . . . . . . 6

Preparing the card remote commander . . . . . . . 6

Setting the clock . . . . . . . . . . . . . . . . . . . . . . . . 6

Detaching the front panel . . . . . . . . . . . . . . . . . 6

Attaching the front panel . . . . . . . . . . . . . . . 7

Adjusting the angle of the front panel . . . . . . . . 7

Location of controls and basic

operations

Main unit. . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Card remote commander RM-X174 . . . . . . 10

Searching for a track . . . . . . . . . . . . . . . . . . . . 12

Searching a track by name

— Quick-BrowZer . . . . . . . . . . . . . . . . . . . 12

Searching a track by listening to track passages

— ZAPPIN™ . . . . . . . . . . . . . . . . . . . . . . . 12

Radio

Storing and receiving stations . . . . . . . . . . . . . 13

Storing automatically — BTM . . . . . . . . . . 13

Storing manually. . . . . . . . . . . . . . . . . . . . . 13

Receiving the stored stations . . . . . . . . . . . 13

Tuning automatically . . . . . . . . . . . . . . . . . 14

Receiving a station through a list

— LIST. . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

RDS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Setting AF and TA . . . . . . . . . . . . . . . . . . . 15

Selecting PTY . . . . . . . . . . . . . . . . . . . . . . . 15

Setting CT. . . . . . . . . . . . . . . . . . . . . . . . . . 15

CD

Playing a disc. . . . . . . . . . . . . . . . . . . . . . . . . . 16

Display items . . . . . . . . . . . . . . . . . . . . . . . 16

Repeat play . . . . . . . . . . . . . . . . . . . . . . . . . 16

Shuffle play. . . . . . . . . . . . . . . . . . . . . . . . . 16

USB devices

Playing back a USB device. . . . . . . . . . . . . . . 17

Display items . . . . . . . . . . . . . . . . . . . . . . . 17

Repeat and shuffle play . . . . . . . . . . . . . . . 18

iPod

Playing back iPod . . . . . . . . . . . . . . . . . . . . . . 18

Display items . . . . . . . . . . . . . . . . . . . . . . . 19

Setting the play mode . . . . . . . . . . . . . . . . . . . 19

Repeat and shuffle play . . . . . . . . . . . . . . . 19

Operating an iPod directly

— Passenger control . . . . . . . . . . . . . . . . . . . . 20

Other functions

Changing the sound settings . . . . . . . . . . . . . . 20

Adjusting the sound characteristics . . . . . . 20

Customizing the equalizer curve

— EQ3 Parametric Tune . . . . . . . . . . . . . . 21

Adjusting setup items — MENU . . . . . . . . . . 22

Using optional equipment. . . . . . . . . . . . . . . . 23

Auxiliary audio equipment. . . . . . . . . . . . . 23

CD changer. . . . . . . . . . . . . . . . . . . . . . . . . 23

Rotary commander RM-X4S . . . . . . . . . . . 24

Additional Information

Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

Notes on discs . . . . . . . . . . . . . . . . . . . . . . 25

Playback order of MP3/WMA/

AAC files . . . . . . . . . . . . . . . . . . . . . . . . . . 25

About iPod . . . . . . . . . . . . . . . . . . . . . . . . . 25

Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . 26

Removing the unit. . . . . . . . . . . . . . . . . . . . . . 26

Specifications . . . . . . . . . . . . . . . . . . . . . . . . . 27

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . 28

Error displays/Messages. . . . . . . . . . . . . . . 30

5

Support site

If you have any questions or for the latest support information on this

product, please visit the web site below:

http://support.sony-europe.com

Provides information on:

• Models and manufacturers of compatible digital audio players

• Supported MP3/WMA/AAC files

6

2

Getting Started

Playable discs on this unit

This unit can play CD-DA (also containing CD

TEXT) and CD-R/CD-RW (MP3/WMA/AAC

files (page 25)).

Resetting the unit

Before operating the unit for the first time, or

after replacing the car battery or changing the

connections, you must reset the unit.

Detach the front panel (page 6) and press the

RESET button (page 8) with a pointed object,

such as a ball-point pen.

Note

Pressing the RESET button will erase the clock setting

and some stored contents.

Canceling the DEMO mode

You can cancel the demonstration display which

appears during turning off.

1 Press and hold the multi way encoder.

The setup display appears.

2 Rotate the multi way encoder until

“Demo” appears, then press it.

3 Rotate the multi way encoder to select

“off.”

4 Press and hold the multi way encoder.

The setup is complete and the display returns

to normal play/reception mode.

Preparing the card remote

commander

Remove the insulation film.

Tip

For how to replace the battery, see page 26.

Setting the clock

The clock uses a 24-hour digital indication.

1 Press and hold the multi way encoder.

2 Rotate the multi way encoder until

“Clock Adjust” appears, then press it.

The clock adjustment display appears.

3 Rotate the multi way encoder to set

the hour and minute.

To move the digital indication, push the multi

way encoder left/right.

4 After setting the minute, press the

multi way encoder.

The clock starts.

Tip

You can set the clock automatically with the RDS

feature (page 15).

Detaching the front panel

You can detach the front panel of this unit to

prevent theft.

Caution alarm

If you turn the ignition switch to the OFF

position without detaching the front panel, the

caution alarm will sound for a few seconds.

The alarm will only sound if the built-in

amplifier is used.

1 Press (OFF).

The unit is turned off.

2 Press .

The left side of front panel is released.

Type of discs Label on the disc

CD-DA

MP3

WMA

AAC

7

3 Slide the front panel to the left, then

gently pull out the front panel towards

you.

Notes

• Do not drop or put excessive pressure on the front

panel and display window.

• Do not subject the front panel to heat/high

temperature or moisture. Avoid leaving it in a parked

car or on a dashboard/rear tray.

Attaching the front panel

Place the hole A of the front panel onto the

spindle B on the unit, then lightly push the left

side in.

Press (SOURCE) on the unit (or insert a disc) to

operate the unit.

Note

Do not put anything on the inner surface of the front

panel.

Adjusting the angle of the front

panel

1 Press and hold (ANGLE).

“Angle Adjust” will appear in the display.

2 Press (ANGLE) repeatedly until the

front panel is angled accordingly.

The front panel can be set to 3 positions.

3 Press any button on the unit except

(ANGLE).

The display returns to normal reception

mode.

If no button is pressed for 30 seconds, the

display returns to normal reception mode.

Tips

• After the front panel slides down (to insert the disc),

it returns to the position you set again automatically.

• The front panel angle you set is stored in the unit.

When turning the ignition off, the angle returns to its

default position, then turning the ignition on, the front

panel is angled you set.

(OFF)

B

A

(ANGLE)

8

Location of controls and basic operations

Main unit

This section contains instructions on the location

of controls and basic operations. For details, see

the respective pages.

The corresponding buttons on the card remote

commander control the same functions as those

on the unit.

A SOURCE button

To power on; change the source (Radio/CD/

USB/AUX)*

1

.

B (BACK) button page 12

To return to the previous display.

C SHUF/ZAP button page 13, 16, 18, 19,

23

To enter Shuffle mode (press); enter

ZAPPIN™ mode (press and hold).

D OFF button

To power off; stop the source.

E (BROWSE) button page 12

To list up (Radio); enter the Quick-BrowZer

mode (CD/USB/iPod).

F Multi way encoder

Rotate to: Adjust the volume/select a menu

item.

Push up/down/left/right to: Select a menu

item.

Press to: Enter sound setting/apply a setting.

Press and hold to: Enter menu.

CD/USB:

Push up/down to:

– Skip albums (push)*

2

.

– Skip albums continuously (push and

hold)*

2

.

Push left/right to:

– Skip tracks (push).

– Skip tracks continuously (push, then push

again within about 2 seconds and hold).

– Reverse/fast-forward a track (push and

hold).

Radio:

Push up/down to:

– Receive stored station.

Push left/right to:

– Tune in stations automatically (push).

– Find a station manually (push and hold).

PUSH ENTER /SOUND/MENU

ANGLE

OFF

SOURCE

MODE

SHUF/

ZAP

DSPL/

PTY

AF/TA

q

s

q

a

q

d

q

g

q

;

q

f

12 465893

7

9

G Disc slot page 16

To insert the disc.

H Display window

I Receptor for the card remote

commander

J (front panel release) button page 6

K MODE button page 13, 19, 20

Press to: Select the radio band (FM/MW/

LW)*

1

/select the play mode of iPod.

Press and hold to: Enter/cancel the passenger

control.

L AF (Alternative Frequencies)/

TA (Traffic Announcement) button

page 15

To set AF and TA in RDS.

M DSPL (display)/PTY (Program Type)

button page 16, 17, 19

To change display items/select PTY in RDS.

N RESET button page 6

O Z (eject)/ANGLE button page 7

To eject the disc/slide down the front panel

(press); angle the front panel in 3 positions

(press and hold).

*1 In the case of a CD changer being connected;

when (SOURCE) is pressed, “CD” and the unit

number will appear in the display. Furthermore, if

(MODE) is pressed, you can switch the changer.

*2 When an MP3/WMA/AAC is played.

10

Card remote commander

RM-X174

Remove the insulation film before use (page 6).

A OFF button

To power off; stop the source.

B SOURCE button

To power on; change the source (Radio/CD/

USB/AUX).

C </, (SEEK –/+) buttons

The same as pushing the multi way encoder

left/right on the unit.

Setup, sound setting, etc., can be operated by

< ,.

D MENU button

To enter menu.

E ENTER button

To apply a setting.

F DSPL (display)/PTY (Program Type)

button

To change display items/select PTY in RDS.

G VOL (volume) +/– button

To adjust volume.

OFF

SCRL

SOURCE

MODE

132

465

ATT

VOL

+

–

+

–

DSPL/PTY

ENTER

REP SHUF

MENU

SOUND

PAU SE

2

9

0

1

3

4

5

6

8

7

qf

qs

qa

qd

11

H ATT (attenuate) button

To attenuate the sound. To cancel, press

again.

I SOUND button

To enter sound setting.

J MODE button

Press to: Select the radio band (FM/MW/

LW)/select the play mode of iPod.

Press and hold to: Enter/cancel the passenger

control.

K (BROWSE) button

To list up (Radio); enter the Quick-BrowZer

mode (CD/USB/iPod).

L M/m (+/–) buttons

The same as pushing the multi way encoder

up/down on the unit.

Setup, sound setting, etc., can be operated by

M m.

M SCRL (scroll) button

To scroll the display item.

N Number buttons

CD/USB:

(1): REP page 16, 18

(2): SHUF page 16, 18

(6): PAUSE

To pause playback. To cancel, press

again.

Radio:

To receive stored stations (press); store

stations (press and hold).

Note

If the unit is turned off and the display disappears, it

cannot be operated with the card remote commander

unless (SOURCE) on the unit is pressed, or a disc is

inserted to activate the unit first.

12

Searching for a track

Searching a track by name

— Quick-BrowZer

You can search for a track in a CD, USB device

or iPod easily by category.

1 Press (BROWSE).

The unit enters the Quick-BrowZer mode,

and the list of search categories appears.

2 Rotate the multi way encoder to select

the desired search category, then

press it to confirm.

3 Repeat step 2 until the desired track is

selected.

Playback starts.

To return to the previous display

Press (BACK).

To exit the Quick-BrowZer mode

Press (BROWSE).

Note

When entering the Quick-BrowZer mode, the repeat/

shuffle setting is canceled.

Searching by skip items

— Jump mode

When many items are in a category, you can

search the desired item quickly.

1 Push the multi way encoder right, in Quick-

BrowZer mode.

The following display appears.

A Current item number

B Total item number in the current layer

C Item name

Then the item name will appear.

2 Rotate the multi way encoder to select the

desired item, or one near the desired item.

It skips in steps of 10% of the total item

number.

3 Press the multi way encoder.

The display returns to the Quick-BrowZer

mode and the selected item appears.

4 Rotate the multi way encoder to select the

desired item and press it.

Playback starts if the selected item is a track.

To cancel Jump mode

Press (BACK) or push the multi way encoder

left.

Searching a track by listening to

track passages — ZAPPIN™

While playing back short track passages in a CD,

USB device or iPod in sequence, you can search

for a track you want to listen to.

ZAPPIN mode is suitable for searching for a

track in shuffle or shuffle repeat mode.

OFF

SOURCE

MODE

SHUF/

ZAP

DSPL/

PTY

AF/TA

(BROWSE)

Multi way encoder

(BACK)

A

B

C

OFF

SOURCE

MODE

SHUF/

ZAP

DSPL/

PTY

AF/TA

SHUF/ZAP Multi way encoder

(BACK)

13

1 Press and hold (SHUF/ZAP) during

playback.

After “ZAPPIN” appears in the display,

playback starts from a passage of the next

track.

The passage is played for the set time, then a

click sounds and the next passage starts.

2 Press the multi way encoder or press

and hold (SHUF/ZAP) when a track you

want to listen is played back.

The track that you select returns to normal

play mode from the beginning.

To search a track by ZAPPIN mode again,

repeat steps 1 and 2.

Tips

• You can select the playback time from about 6

seconds/9 seconds/30 seconds (page 22).You

cannot select the passage of the track to playback.

• Push the multi way encoder left/right in ZAPPIN

mode to skip a track.

• Push the multi way encoder up/down in ZAPPIN

mode to skip album.

• Pressing (BACK) also confirms a track to

playback.

Radio

Storing and receiving stations

Caution

When tuning in stations while driving, use Best

Tuning Memory (BTM) to prevent an accident.

Storing automatically — BTM

1 Press (SOURCE) repeatedly until

“TUNER” appears.

To change the band, press (MODE)

repeatedly. You can select from FM1, FM2,

FM3, MW or LW.

2 Press and hold the multi way encoder.

3 Rotate the multi way encoder until

“BTM” appears, then press it.

The unit stores stations in order of frequency

in the preset list.

A beep sounds when the setting is stored.

Storing manually

1 While receiving the station that you

want to store, push (BROWSE).

The preset list appears.

2 Rotate the multi way encoder to select

the preset number.

3 Push and hold the multi way encoder

until “MEM” appears.

(with the card remote commander)

1 While receiving the station that you

want to store, press and hold a

number button ((1) to (6)) until

“MEM” appears.

Note

If you try to store another station on the same number

button, the previously stored station will be replaced.

Receiving the stored stations

1 Select the band, then push the multi

way encoder up/down.

(with the card remote commander)

1 Select the band, then press a number

button ((1) to (6)).

1

2

3

4

SHUF/

ZAP

The part of each track to

playback in ZAPPIN mode.

Track

14

Tuning automatically

1 Select the band, then push the multi

way encoder left/right to search for the

station.

Scanning stops when the unit receives a

station. Repeat this procedure until the

desired station is received.

Tip

If you know the frequency of the station you want to

listen to, push and hold the multi way encoder left/right

to quickly locate the approximate frequency, then push

the multi way encoder left/right repeatedly to fine

adjust to the desired frequency (manual tuning).

Receiving a station through a list

— LIST

You can list up the frequency.

1 Select the band, then push

(BROWSE).

The preset list appears.

2 Rotate the multi way encoder until the

desired station appears.

3 Press the multi way encoder to receive

the station.

The display returns to normal reception

mode.

RDS

Overview

FM stations with Radio Data System (RDS)

service send inaudible digital information along

with the regular radio program signal.

Display items

A Radio band

B TP/TA/AF*

1

C Clock

D Preset number

E Frequency*

2

(Program service name), RDS

data

*1 When Information “on” is set:

– “TP” lights up while “TP” is received.

– “TA”/“AF” lights up while “TA/AF” is on.

*2 While receiving the RDS station, “RDS” is

displayed on the left of the frequency indication.

RDS services

This unit automatically provides RDS services as

follows:

Notes

• Depending on the country/region, not all RDS

functions may be available.

• RDS will not work if the signal strength is too weak,

or if the station you are tuned to is not transmitting

RDS data.

AF (Alternative Frequencies)

Selects and retunes the station with the

strongest signal in a network. By using this

function, you can continuously listen to the

same program during a long-distance drive

without having to retune the same station

manually.

TA (Traffic Announcement)/TP (Traffic

Program)

Provides current traffic information/programs.

Any information/program received, will

interrupt the currently selected source.

PTY (Program Types)

Displays the currently received program type.

Also searches your selected program type.

CT (Clock Time)

The CT data from the RDS transmission sets

the clock.

A B C

D E

15

Setting AF and TA

1 Press (AF/TA) repeatedly until the

desired setting appears.

Storing RDS stations with the AF and

TA setting

You can preset RDS stations along with the AF/

TA setting. If you use the BTM function, only

RDS stations are stored with the same AF/TA

setting.

If you preset manually, you can preset both RDS

and non-RDS stations with the AF/TA setting for

each.

1 Set AF/TA, then store the station with BTM or

manually.

Receiving emergency

announcements

With AF or TA on, the emergency

announcements will automatically interrupt the

currently selected source.

Tip

If you adjust the volume level during a traffic

announcement, that level will be stored into memory

for subsequent traffic announcements, independently

from the regular volume level.

Staying with one regional program

— Regional

When the AF function is on: this unit’s factory

setting restricts reception to a specific region, so

you will not be switched to another regional

station with a stronger frequency.

If you leave this regional program’s reception

area, set “Regional off” in setup during FM

reception (page 22).

Note

This function does not work in the UK and in some

other areas.

Local Link function (UK only)

This function enables you to select other local

stations in the area, even if they are not stored on

your number buttons.

1 During FM reception, press a number button

((1) to (6)) on which a local station is stored.

2 Within 5 seconds, press again a number button

of the local station.

Repeat this procedure until the local station is

received.

Selecting PTY

1 Press and hold (DSPL/PTY) during FM

reception.

The current program type name appears if the

station is transmitting PTY data.

2 Rotate the multi way encoder until the

desired program type appears.

3 Press the multi way encoder.

The unit starts to search for a station

broadcasting the selected program type.

Type of programs

Note

You cannot use this function in countries/regions

where no PTY data is available.

Setting CT

1 Set “CT on” in setup (page 22).

Notes

• The CT function may not work even though an RDS

station is being received.

• There might be a difference between the time set by

the CT function and the actual time.

Select To

AF on activate AF and deactivate TA.

TA on activate TA and deactivate AF.

AF/TA on activate both AF and TA.

AF/TA off deactivate both AF and TA.

News (News), Current Affairs (Current

Affairs), Information (Information), Sport

(Sports), Education (Education), Drama

(Drama), Cultures (Culture), Science

(Science), Varied Speech (Varied), Pop

Music (Popular Music), Rock Music (Rock

Music), Easy Listening (Easy Listening),

Light Classics M (Light Classical), Serious

Classics (Classical), Other Music (Other

Music Type), Weather & Metr (Weather),

Finance (Finance), Children’s Progs

(Children’s Programmes), Social Affairs

(Social Affairs), Religion (Religion), Phone

In (Phone In), Travel & Touring (Travel),

Leisure & Hobby (Leisure), Jazz Music

(Jazz Music), Country Music (Country

Music), National Music (National Music),

Oldies Music (Oldies Music), Folk Music

(Folk Music), Documentary (Documentary)

16

CD

Playing a disc

1 Press Z.

2 Insert the disc (label side up).

3 Close the front panel.

The front panel slides up automatically, then

playback starts automatically.

Ejecting the disc

1 Press Z.

The front panel slides down automatically,

then the disc is ejected.

2 Press Z to close the front panel.

Display items

A Source (CD/MP3/WMA/AAC) indication

B Clock

C Artist name/Album name, Track name, Folder

number/Track number/Elapsed playing time

To change display items C, press (DSPL/PTY).

Tip

Displayed items will differ depending on the disc type,

recording format and settings.

Repeat play

1 During playback, press (1) (REP) on

the card remote commander until the

desired setting appears.

* When an MP3/WMA/AAC is played.

To return to normal play mode, select “Repeat

off.”

Shuffle play

1 During playback, press (SHUF/ZAP)

repeatedly until the desired setting

appears.

* When an MP3/WMA/AAC is played.

To return to normal play mode, select “Shuffle

off.”

Select To play

Repeat Track track repeatedly.

Repeat Album* album repeatedly.

A

B

C

Select To play

Shuffle Album* album in random order.

Shuffle Disc disc in random order.

17

USB devices

For details on the compatibility of your USB

device, visit the support site.

• MSC (Mass Storage Class) and MTP (Media

Transfer Protocol) type USB devices compliant

with the USB standard can be used.

• Corresponding codec is MP3 (.mp3), WMA

(.wma) and AAC (.m4a).

• Backup of data in a USB device is

recommended.

Note

Connect the USB device after starting the engine.

Depending on the USB device, malfunction or damage

may occur if it is connected before starting the engine.

Playing back a USB device

1 Remove the USB cap from the USB

connector and connect the USB

device to the USB connector.

Playback starts.

If a USB device is already connected, to start

playback, press (SOURCE) repeatedly until

“USB” appears.

Press (OFF) to stop playback.

Removing the USB device

1 Stop the USB device playback.

2 Remove the USB device.

If you remove your USB device during

playback, data in the USB device may be

damaged.

Notes

• Do not use USB devices so large or heavy that they

may fall down due to vibration, or cause a loose

connection.

• This unit cannot recognize USB devices via a USB

hub.

• If the USB is disconnected during playback, “NO

Device” appears in the display of the unit.

Display items

A Source (MP3/WMA/AAC) indication

B Clock

C Artist name/Album name, Track name, Folder

number/Track number/Elapsed playing time

To change display items C, press (DSPL/PTY).

Notes

• Displayed items will differ, depending on the USB

device, recorded format and settings. For details,

visit the support site.

• The maximum number of displayable data is as

follows.

– folders (albums): 128

– files (tracks) per folder: 512

• Do not leave a USB device in a parked car, as

malfunction may result.

• It may take time for playback to begin, depending on

the amount of recorded data.

• DRM (Digital Rights Management) files may not be

played.

• During playback or fast-forward/reverse of a VBR

(Variable Bit Rate) MP3/WMA/AAC file, elapsed

playing time may not display accurately.

• Playback of the following MP3/WMA/AAC files is not

supported.

– lossless compression

– copyright-protected

Support site

http://support.sony-europe.com

A

B

C

18

Repeat and shuffle play

1 During playback, press (1) (REP) on

the card remote commander or

(SHUF/ZAP) on the unit repeatedly until

the desired setting appears.

To return to normal play mode, select “Repeat

off” or “Shuffle off.”

After about 3 seconds, the setting is complete.

iPod

For details on the compatibility of your iPod, see

“About iPod” on page 25 or visit the support site.

In these Operating Instructions, “iPod” is used as

a general reference for the iPod functions on the

iPod and iPhone, unless otherwise specified by

the text or illustrations.

Playing back iPod

Before connecting the iPod, turn down the

volume of the unit.

1 Remove the USB cap from the USB

connector and connect the iPod to the

USB connector via the dock connector

to USB cable.

The iPod will turn on automatically, and the

display will appear on the iPod screen as

below.*

Tip

We recommend the RC-100IP USB cable (not

supplied) to connect the dock connector.

The tracks on the iPod start playing

automatically from the point last played.

If an iPod is already connected, to start

playback press (SOURCE) repeatedly until

“USB” appears. (“iPod” appears in the

display when iPod is recognized.)

* If the iPod was played back in the passenger control

last time, this will not appear.

Select To play

Repeat Track track repeatedly.

Repeat Album album repeatedly.

Shuffle Album album in random order.

Shuffle Device device in random order.

Support site

http://support.sony-europe.com

19

2 Press (MODE) to select the play mode.

The mode changes as follows:

Resuming Mode t Album Mode t

Track Mode t Podcast Mode* t

Genre Mode t Playlist Mode t

Artist Mode

* May not appear depending on iPod setting.

3 Adjust the volume.

Press (OFF) to stop playback.

Removing the iPod

1 Stop the iPod playback.

2 Remove the iPod.

Caution for iPhone

When you connect an iPhone via USB, telephone

volume is controlled by iPhone itself. In order to avoid

sudden loud sound after a call, do not increase the

volume on the unit during a telephone call.

Note

This unit cannot recognize iPod via a USB hub.

Tips

• When the ignition key is turned to the ACC position,

and the unit is on, the iPod will be recharged.

• If the iPod is disconnected during playback, “NO

Device” appears in the display of the unit.

Resuming mode

When the iPod is connected to the dock

connector, the mode of this unit changes to

resuming mode and playback starts in the mode

set by the iPod.

In resuming mode, repeat/shuffle play does not

function.

Display items

A Source (iPod) indication

B Clock

C Artist name/Album name, Track name,

Album number/Track number/Elapsed

playing time

To change display items C, press (DSPL/PTY).

Tip

When album/podcast/genre/artist/playlist is changed,

its item number appears momentarily.

Note

Some letters stored in iPod may not be displayed

correctly.

Setting the play mode

1 During playback, press (MODE).

The mode changes as follows:

Album Mode t Track Mode t

Podcast Mode* t Genre Mode t

Playlist Mode t Artist Mode

* May not appear depending on iPod setting.

Skipping albums, podcasts, genres,

playlists and artists

Repeat and shuffle play

1 During playback, press (1) (REP) on

the card remote commander or

(SHUF/ZAP) on the unit repeatedly until

the desired setting appears.

To return to normal play mode, select “Repeat

off” or “Shuffle off.”

After about 3 seconds, the setting is complete.

A

B

C

To Do this

Skip push the multi way encoder up/

down.

Skip

continuously

push and hold the multi way

encoder up/down.

Select To play

Repeat Track track repeatedly.

Repeat Album album repeatedly.

Repeat Podcast podcast repeatedly.

Repeat Artist artist repeatedly.

Repeat Playlist playlist repeatedly.

Repeat Genre genre repeatedly.

Shuffle Album album in random order.

Shuffle Podcast podcast in random order.

Shuffle Artist artist in random order.

Shuffle Playlist playlist in random order.

Shuffle Genre genre in random order.

Shuffle Device device in random order.

20

Operating an iPod directly

— Passenger control

You can operate an iPod connected to the dock

connector directly.

1 During playback, press and hold

(MODE).

“Mode iPod” appears and you will be able to

operate the iPod directly.

To exit the passenger control

Press and hold (MODE).

Then “Mode Audio” will appear and the play

mode will change to “Resuming.”

Notes

• The volume can be adjusted only by the unit.

• If this mode is canceled, the repeat setting will be

turned off.

Other functions

Changing the sound settings

Adjusting the sound

characteristics

1 Press the multi way encoder.

2 Rotate the multi way encoder until the

desired menu item appears, then

press it.

3 Use the multi way encoder to select

the setting, then press it.

4 Press (BACK).

The setting is complete and the display

returns to normal play/reception mode.

The following items can be set:

The operation of the multi way encoder will

differ depending on the items.

: Push the multi way encoder up/down

: Push the multi way encoder left/right

: Rotate the multi way encoder

EQ3 Parametric Preset ( or )

Selects an equalizer curve from 7 music types.

EQ3 Parametric Tune*

1

Custom equalizer settings. See “Customizing

the equalizer curve — EQ3 Parametric Tune”

Subwoofer Tune & LPF

Phase (, or press (MODE))

Selects the phase: “Normal,” “Reverse.”

FREQ ()

Selects the subwoofer cut-off frequency:

“80Hz,” “100Hz,” “120Hz,” “140Hz,” “160Hz,”

“off.”

Level ()

Adjusts the subwoofer volume: “+10 dB” –

“0 dB” – “–10 dB.”

(“– ∞” is displayed at the lowest setting.)

HPF & Speaker Select

Speaker ()

Selects the Speaker: “All,” “Front”, or “Rear.”

FREQ ()

Selects the cut-off frequency: “off,” “80Hz,”

“100Hz,” “120Hz,” “140Hz,” “160Hz.”

DM+ Advanced*

2

( or )

Improves digitally compressed sound, such as

MP3.

To activate the DM+ Advanced function, set

“on.” To cancel, set “off.”

La page charge ...

Sony cdx gt930ui Le manuel du propriétaire

Ce manuel convient également à

Sony cdx gt930ui Le manuel du propriétaire

dans d''autres langues

Documents connexes