Olympus D520 Zoom Le manuel du propriétaire

C-2 Zoom

D-520 ZOOM

C-220 ZOOM

ENGLISH

FRANÇAIS

DEUTSCH

ESPAÑOL

basic_e_d.fm Page 1 Tuesday, February 12, 2002 4:29 PM

2 En

En

CONTENTS/TABLE DES MATIÉRES/INHALT/CONTENIDO/

ENGLISH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2

FRANÇAIS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

DEUTSCH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74

ESPAÑOL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 110

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 146

CONTENTS

GETTING STARTED . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

MENU FUNCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

SHOOTING BASICS . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

SELECTING THE IMAGE QUALITY (RECORD MODE) 23

PLAYBACK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

PRINT SETTINGS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

DOWNLOADING PICTURES TO A COMPUTER . . . . . 31

OPTIONAL ACCESSORIES . . . . . . . . . . . . . . . . . . . . . 33

ERROR CODES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

These instructions are only for quick reference. For more details

on the functions described here, refer to the “Reference Manual”

on CD-ROM.

basic_e_d.fm Page 2 Tuesday, February 12, 2002 4:29 PM

En 3

En

For customers in Europe

For customers in North and South America

For customers in USA

Declaration of Conformity

Model Number : C-2 Zoom/D-520 ZOOM/C-220 ZOOM

Trade Name : OLYMPUS

Responsible Party : Olympus America Inc.

Address : 2 Corporate Center Drive, Melville, New York

11747-3157 U.S.A.

Telephone Number: 631-844-5000

Tested To Comply With FCC Standards

FOR HOME OR OFFICE USE

This device complies with Part 15 of the FCC rules. Operation is subject to

the following two conditions:

(1) This device may not cause harmful interference.

(2) This device must accept any interference received, including interference

that may cause undesired operation.

For customers in Canada

This Class B digital apparatus meets all requirements of the Canadian

Interference-Causing Equipment Regulations.

Trademarks

• IBM is a registered trademark of International Business Machines Corporation.

• Microsoft and Windows are registered trademarks of Microsoft Corporation.

• Macintosh is a trademark of Apple Computer Inc.

• All other company and product names are registered trademarks and/or

trademarks of their respective owners.

• The standards for camera file systems referred to in this manual are the “Design

Rule for Camera File System/DCF” standards stipulated by the Japan Electronics

and Information Technology Industries Association (JEITA).

“CE” mark indicates that this product complies with the European

requirements for safety, health, environment and customer

protection. “CE” mark cameras are intended for sales in Europe.

basic_e_d.fm Page 3 Tuesday, February 12, 2002 4:29 PM

4 En

En

GETTING STARTED

J NAMES OF PARTS

Lens barrier

Turns the camera on and

off in the shooting mode.

Shutter

button

Lens

Extends automatically when

you open the lens barrier.

Self-timer lamp

Connector cover

DC-IN jack

USB connector

Flash

Pops up when you

open the lens barrier.

Zoom

lever

VIDEO

OUT jack

(Monitor) button

Turns the camera on and

off in the playback mode.

Card cover

Strap eyelet

Monitor

Arrow pad

Battery

compartment

cover

Tripod socket

Green lamp

AF target mark

Viewfinder

(OK/Menu) button

Orange lamp

basic_e_d.fm Page 4 Tuesday, February 12, 2002 4:29 PM

En 5

En

J MONITOR INDICATIONS

Item Indication

1

Battery check ,

2

Flash , , , ,

3

Spot metering

4

Memory gauge

5

Exposure compensation -2.0, -1.5, -1.0, -0.5, +0.5, +1.0, +1.5, +2.0

6

Self-timer/Drive , ,

7

White balance WB AUTO, , , ,

8

Record mode SHQ, HQ, SQ1, SQ2

9

Number of storable still

pictures/Seconds remaining

16/16"

10

Number of pixels 1600 × 1200, 1024 × 768, 640 × 480

11

Date and time '02.01.12 12:30

12

File number, Frame number/

Playing time

100-0016, 16/16"

13

Print reservation, Number of prints

× 2

14

Protect

You can view shooting information details of the recorded picture in the

playback mode.

1

2

Shooting mode Playback mode

3

4

5

6

7

8

9

13

11

12

1

8

10

5

14

7

basic_e_d.fm Page 5 Tuesday, February 12, 2002 4:29 PM

6 En

En

Memory gauge

The memory gauge lights up when you take a picture. While the gauge is lit,

the camera is storing the picture on the card. The memory gauge indication

changes as shown below depending on the shooting status. When the

memory gauge is full, wait a few moments before taking the next shot.

When taking still pictures

When recording movies

Battery check

If the remaining battery power is low, the battery check indication on the

monitor changes as follows while the camera is turned on.

Before

shooting

(Gauge is

off)

No more pictures

can be taken

(Fully Lit)

One picture

taken

(Lit)

More than

two taken

(Lit)

Shoot Shoot Shoot

Wait

Before shooting

(Gauge is off)

During shooting (Lit)

• Shooting is not possible until the lit area goes off completely.

• Movie recording ends automatically when the memory gauge

is full.

Shoot

Wait

If you continue shooting

Lights up (Green) Blinks (Red)

Remaining power

level: high

Remaining power level: low

Replace with a new battery.

Green lamp and Orange

lamp on the right of the

viewfinder blink

Remaining power level:

exhausted

No indication

basic_e_d.fm Page 6 Tuesday, February 12, 2002 4:29 PM

En 7

En

J ATTACHING THE STRAP

1

Thread the short end of the strap

through the strap eyelet.

2

Thread the long end of the strap

through the loop that has already gone

through the eyelet.

3

Pull the strap tight, making sure that it

is securely fastened and does not

come loose.

J LOADING THE BATTERIES

1

Make sure that:

• The monitor is off.

• The lens barrier is closed.

• The lamp on the right of the viewfinder is off.

2

Slide the battery compartment

cover in the direction of (the

direction indicated by the

mark on the cover), and lift it up in

the direction of .

3

Insert the batteries, making sure

that they are correctly oriented as shown in the illustration.

4

Close the battery compartment cover in the

direction of . While pressing the

mark, slide the cover in the direction of .

If the battery compartment cover will not close

easily, do not force it. Try pressing the mark

with both hands.

Battery

insertion

direction

mark

When using

a lithium

battery pack

When using

AA (R6)

batteries

basic_e_d.fm Page 7 Tuesday, February 12, 2002 4:29 PM

8 En

En

AA (R6) alkaline batteries

The number of pictures that you can store in the camera may vary

considerably with AA batteries, depending on the battery manufacturer,

camera shooting conditions, etc. Use this type of battery only when you have

no other choices available. Turn off the monitor whenever possible to save

power.

J INSERTING THE CARD (SmartMedia)

The pictures you have taken are stored on the card.

1

Make sure that:

• The monitor is off.

• The lens barrier is closed.

• The lamp on the right of the viewfinder is off.

2

Open the card cover.

3

Insert the card as far as it will go in

the direction shown in the

illustration.

There is an arrow inside the card cover,

indicating the direction in which the card

should be inserted.

4

Close the card cover securely until

it clicks.

Card insertion

direction mark

basic_e_d.fm Page 8 Tuesday, February 12, 2002 4:29 PM

En 9

En

J TURNING THE POWER ON/OFF

When shooting pictures

Power on: Open the lens barrier.

The camera turns on in the shooting mode. The lens extends

and the flash pops up.

If the lens does not extend, the lens barrier is not fully open.

Open the lens barrier until it clicks.

Power off: Close the lens barrier slightly until it just touches the lens

barrier.

The lens barrier stops just before it touches the lens and the lens

retracts. Wait until the lens is fully retracted before closing the

lens barrier completely.

The camera turns off. (The monitor also turns off.)

Press the flash down manually until it locks in place.

Do not push the lens barrier forcefully against the lens as this may damage

the lens or cause it to malfunction.

If the date and time have reverted to the

factory default settings, Y/M/D appears

on the monitor.

basic_e_d.fm Page 9 Tuesday, February 12, 2002 4:29 PM

10 En

En

When playing back pictures

Power on: Press the (monitor) button with the lens barrier closed.

The camera turns on in the playback mode. The monitor turns

on and the last picture taken is displayed.

Power off: Press the (monitor).

The monitor and the camera turn off.

Never open the card cover, remove the card or the batteries, or connect or

disconnect the AC adapter while the camera is turned on. Doing so could

destroy all data on the card. Destroyed data cannot be restored. When

changing the card, be sure to turn the camera off before opening the card

cover.

(monitor) button

basic_e_d.fm Page 10 Tuesday, February 12, 2002 4:29 PM

En 11

En

J SETTING THE DATE AND TIME

1

Open the lens barrier.

2

Press .

The shooting mode top menu is displayed.

3

Press on the arrow pad to select MODE MENU.

4

Press to select the SETUP tab, then press .

5

Press to select , then press .

6

Press to select one of the following date formats:

Y-M-D (Year/Month/Day)

M-D-Y (Month/Day/Year)

D-M-Y (Day/Month/Year)

Then press .

The cursor moves to the next setting field.

7

Press to set the first field, then press to move to

the next field.

Press to move back to the previous setting field.

8

Repeat the above steps until the date and time are completely

set.

9

Press .

For a more accurate setting, press when the clock hits 00 seconds.

The clock starts when you press .

10

Close the lens barrier.

The camera turns off.

If the camera is left for about 1 hour with the batteries removed, or if the

battery power is exhausted, the date and time settings may be canceled or

become incorrect. Before taking important pictures, check that the date and

time settings are correct.

basic_e_d.fm Page 11 Tuesday, February 12, 2002 4:29 PM

12 En

En

MENU FUNCTIONS

J USING THE MENUS AND TABS

When you turn on the camera and press , the top menu is displayed on

the monitor. The functions of this camera are set from the menus. This

chapter explains how the menus work, using the shooting mode screens.

Shortcut Menus

• Let you quickly access the most

frequently used menu settings.

• Display operational buttons at

the bottom of the screen, and let

you select items by pressing

.

Select each menu using

the arrow pad.

Press .

The top menu is displayed.

Mode Menu

• Lets you access the menu

selections to set the metering,

white balance, etc.

• Categorizes the settings into 4

tabs.

• Displays the CAMERA,

PICTURE, CARD and SETUP

tabs. Select the desired tab on

the left of the screen by pressing

.

Tabs

basic_e_d.fm Page 12 Tuesday, February 12, 2002 4:29 PM

En 13

En

How to use the menus

1

Press to display

the top menu, then

press

.

2

Press to select

a tab, then press to

display the menu.

Top menu

CAMERA tab

PICTURE tab

CARD tab

SETUP tab

To return

to select a

tab, press

.

basic_e_d.fm Page 13 Tuesday, February 12, 2002 4:29 PM

14 En

En

• Not all items can be selected depending on the status of the camera and the

settings performed. For example, when the movie mode is selected, you

cannot select SEPIA, BLACK&WHITE or in the EDIT tab category.

• By pressing the shutter button to take a picture while the menu is displayed,

you can take pictures with the currently selected settings.

• If you want to save the settings after the camera is turned off, set All Reset

to OFF.

3

Press to select the

desired item, then press

to display the available

setting selections.

4

Press to select

the setting.

Setting is completed

when the setting has

been selected.

The green frame

moves to the

selected item.

To close the menu,

press twice.

or

To return to

select an

item, press

or .

basic_e_d.fm Page 14 Tuesday, February 12, 2002 4:29 PM

En 15

En

Shortcut menus

Shooting mode

DRIVE

FUNCTION

Playback mode

MOVIE PLAYBACK

INFO

ERASE

Lets you shoot one frame at a time (normal shooting).

Lets you shoot pictures in succession.

Lets you shoot movies.

Lets you select the resolution and the image quality of the image.

Still picture : SHQ, HQ, SQ1 and SQ2

Movie : HQ, SQ

2 IN 1

Lets you combine two still pictures taken in succession

into one picture.

Self-portrait mode:

Lets you take a picture of yourself while holding the camera.

PANORAMA

Allows panorama pictures to be taken with Olympus

CAMEDIA-brand SmartMedia cards.

Displays all recorded pictures in slide-show fashion.

Plays back a movie.

Displays all the shooting information on the monitor.

Erases a selected picture.

basic_e_d.fm Page 15 Tuesday, February 12, 2002 4:29 PM

16 En

En

Mode menus

Mode menu functions are categorized into 4 tabs. Use to select a

tab and display the respective functions.

These instructions are only for quick reference. For more details on

the functions described here, refer to the “Reference Manual” on

CD-ROM.

Shooting mode

CAMERA tab

Adjusts the brightness of the image (Exposure

compensation).

DIGITAL ZOOM

Extends the maximum optical zoom, making possible up to

approximately 5x zoom shooting with the digital zoom

function.

METERING

Selects the area of the image that will be used to determine

exposure or image brightness from the two available

settings: ESP or (spot metering).

PICTURE tab

WB

Sets the appropriate white balance according to the light

source.

CARD tab

CARD SETUP Formats a card.

SETUP tab

ALL RESET

Selects whether to save the current camera settings when

you turn off the power.

Turns the beep sound (used for warnings, etc.) on and off.

REC VIEW

Selects whether to display pictures on the monitor while

saving them.

Adjusts the brightness of the monitor.

Sets the date and time.

CAMERA tab

PICTURE tab

CARD tab

SETUP tab

basic_e_d.fm Page 16 Tuesday, February 12, 2002 4:29 PM

En 17

En

Playback mode

PLAY tab

Protects pictures from accidental erasure.

Rotates pictures 90 degrees clockwise or counter-

clockwise.

Stores printing information on the card required for DPOF

printers.

EDIT tab

BLACK & WHITE Creates black and white pictures.

SEPIA Creates sepia-toned pictures.

Makes the file size smaller.

INDEX Creates an index picture of a movie in 9 frames.

CARD tab

CARD SETUP

Formats a card.

Erases all image data stored on the card.

SETUP tab

ALL RESET

Selects whether to save the current camera settings when

you turn off the power.

Turns the beep sound (used for warnings, etc.) on and off.

Selects the number of frames in the index display.

Adjusts the brightness of the monitor.

Sets the date and time.

PLAY tab

EDIT tab

CARD tab

SETUP tab

basic_e_d.fm Page 17 Tuesday, February 12, 2002 4:29 PM

18 En

En

SHOOTING BASICS

J TAKING STILL PICTURES

You can take still pictures using either the viewfinder or the monitor. Both

methods are easy as all you have to do is to press the shutter button.

Taking still pictures using the viewfinder

1

Open the lens barrier.

Slide the lens barrier open until it clicks.

The flash pops up and the lens extends.

2

Position the AF target mark over the subject in the viewfinder.

When the distance from the camera to the subject is less than 0.5 m/

1.6 ft, select the macro mode.

3

Press the shutter button gently (halfway).

The green lamp on the right of the viewfinder lights up when the focus

and exposure are locked. At this time the sound of the focusing

mechanism can be heard from inside the camera, but no picture is

being taken.

4

Press the shutter button all the way (fully).

The camera takes the picture.

Taking still pictures using the monitor

1

Open the lens barrier.

Slide the lens barrier open until it clicks.

The flash pops up and the lens extends.

2

Press .

The monitor turns on.

3

Determine the image composition while observing your

subject on the monitor.

4

Take the picture by following the same procedure as for

shooting using the viewfinder.

Press the shutter button all the way (fully) to take the picture.

When you want to take pictures with the monitor off, press again.

Never open the card cover, remove the batteries or disconnect the AC adapter

while the orange lamp is blinking. Doing so could destroy stored pictures and

prevent storage of pictures you have just taken.

basic_e_d.fm Page 18 Tuesday, February 12, 2002 4:29 PM

En 19

En

J

IF CORRECT FOCUS CANNOT BE OBTAINED (FOCUS LOCK)

When the subject you want to focus on is not in the center of the frame and

you cannot position the AF target mark on it, you can focus the camera on

another point at roughly the same distance (focus lock) and take the picture

as explained below.

1

Open the lens barrier.

The camera turns on in the shooting mode.

2

Look into the viewfinder and position

the AF target mark on the subject.

When shooting a hard-to-focus subject or a

fast-moving subject, point the camera at an

object about the same distance away as

the subject.

3

Half-press the shutter button until the

green lamp on the right of the viewfinder illuminates steady.

The focus and exposure are locked when the green lamp lights up.

4

Keeping the shutter button pressed

halfway, recompose your shot in the

viewfinder.

5

Press the shutter button fully.

Green lamp

basic_e_d.fm Page 19 Tuesday, February 12, 2002 4:29 PM

20 En

En

J RECORDING MOVIES

You can record movies with this camera. Recorded movies can be played

back or stored separately as still pictures using the index function.

1

Display the top menu in the shooting mode.

• Open the lens barrier.

•Press .

2

Press to select DRIVE.

3

Press to select , then press .

Movie recording is set and the menu is closed.

The total recordable time depending on the card memory capacity and

the

mark are displayed on the monitor.

4

Record the movie while observing your subject on the

monitor.

Press the shutter button fully to start recording. When you press the

shutter button, the number of seconds remaining for one record is

displayed. Press the shutter button fully again to stop recording.

To cancel movie mode

Press .

The monitor turns off and the movie mode is canceled.

J

ZOOMING IN ON A SUBJECT (OPTICAL ZOOM)

Telephoto and wide-angle shooting are possible at 3x magnification using the

optical zoom (equivalent to 38 mm -114 mm on a 35mm camera). By combining

the 3x optical zoom with the 2.5x digital zoom, you can obtain zoom

magnification of approximately 7.5x (equivalent to 38 mm - 285 mm on a 35 mm

camera). When the record mode is set to SQ2, the 5x digital zoom is available.

1

Open the lens barrier.

The camera turns on in the shooting mode.

2

Slide the zoom lever while looking in the viewfinder.

Press the zoom lever toward to zoom in, and toward

to zoom out.

3

Take the picture while looking in the viewfinder.

• During movie recording, the flash and optical zoom are disabled.

• It takes longer to store movies than still pictures.

• The seconds remaining varies depending on the record mode and the

amount of space available on the card.

• You cannot record movies with sound.

Pictures taken with the digital zoom may appear grainy.

basic_e_d.fm Page 20 Tuesday, February 12, 2002 4:29 PM

La page charge ...

Olympus D520 Zoom Le manuel du propriétaire

Ce manuel convient également à

Olympus D520 Zoom Le manuel du propriétaire

dans d''autres langues

Documents connexes

Autres documents