NEC MultiSync® LCD1830 Le manuel du propriétaire

MultiSync LCD1830

User’s Manual

UÏivatelská pﬁíruãka

Bedienerhandbuch

δηγίες ρήσης

Manual del usuario

Manuel Utilisateur

Manuale utente

Gebruikershandleiding

Podr´cznik u˝ytkownika

Руководство пользователя

Kullan∂c

∂ Klavuzu

00Cover_all.p65 13.12.2000, 11:22 Uhr1

00Cover_all.p65 13.12.2000, 11:22 Uhr2

English

âesky

Deutsch

Ελληνικά

Español

Français

Italiano

Nederlands

Polski

Русский

Türkçe

01b_XChapterOpener 13.12.2000, 11:46 Uhr1

01b_XChapterOpener 13.12.2000, 11:46 Uhr2

English-1

English

Declaration

Declaration of the Manufacturer

We hereby certify that the colour monitor

MultiSync LCD1830 (LA-18S02) and

MultiSync LCD1830 (LA-18S02-BK)

are in compliance with

Council Directive 73/23/EEC:

– EN 60950

Council Directive 89/336/EEC:

– EN 55022

– EN 61000-3-2

– EN 61000-3-3

– EN 55024

(IEC 61000-4-2)

(IEC 61000-4-3)

(IEC 61000-4-4)

(IEC 61000-4-5)

(IEC 61000-4-6)

(IEC 61000-4-8)

(IEC 61000-4-11)

and marked with

NEC-Mitsubishi Electric Visual Systems, Corp.

686-1, NISHIOI OI-MACHI

ASHIGARAKAMI-GUN

KANAGAWA 258-8533, JAPAN

Power consumption of the monitor

is less than 3 W when in power-

saving mode.

MultiSync LCD1830 white

Model (LA-18S02)

MultiSync LCD1830 Black

Model (LA-18S02-BK)

01b_English 13.12.2000, 11:50 Uhr1

English-2

Contents

Your new NEC MultiSync LCD monitor box* should contain the following:

• MultiSync LCD1830

monitor with tilt base

• Power Cord

• Video Signal Cable

• User’s Manual

• CD-ROM includes complete User‘s Manual in PDF format and

Windows related files (Inf file and color profile). To see the complete

User‘s Manual, Acrobat Reader 4.0 must be installed on your PC.

* Remember to save your original box and packing material to transport

or ship the monitor.

01b_English 13.12.2000, 11:50 Uhr2

English-3

English

Quick Start

To attach the MultiSync LCD monitor to your system, follow these

instructions:

1. Turn off the power to your computer.

2. For the PC: Connect the 15-pin mini D-SUB of the appropriate

signal cable to the connector of the display card in your system

(Figure A.1). Tighten all screws.

For the Mac: Connect the MultiSync LCD1830 Macintosh cable

adapter to the computer (Figure B.1). Attach the 15-pin mini D-SUB

end of the appropriate signal cable to the MultiSync LCD1830

Macintosh cable adapter (Figure B.1). Tighten all screws.

Remove connector cover and cable cover on back of monitor

(Figure E.1).

3. Connect the 15-pin mini D-SUB of the video signal cable to the

connector “INPUT 1” or “INPUT 2” on the back of the monitor

(Figure C.1).

NOTE: Incorrect cable connections may result in irregular operation,

damage display quality/components of LCD module and/or

shorten the module’s life.

4. Connect one end of the power cord to the MultiSync LCD Series

monitor and the other end to the power outlet. (Figure C.1)

Replace connector cover and cable cover. (Figure E.1)

NOTE: Please refer to Caution section of this manual for proper

selection of AC power cord.

5. Turn on the monitor (Figure D.1) and the computer.

6. To complete the setup of your MultiSync LCD monitor, use the

following OSM controls:

• Auto Adjust Contrast

• Auto Adjust

Refer to the Controls section of this User’s Manual for a full description

of these OSM controls.

NOTE: If you have any problems, please refer to the Troubleshooting

section of this User’s Manual.

NOTE: For easy removal of the cable cover or signal cable, place the

monitor face down. (Figure R.2)

01b_English 13.12.2000, 11:50 Uhr3

English-4

15-pin

mini D-SUB

15-pin

mini D-SUB

Mac Adapter

(not included)

Figure A.1

Figure B.1

Figure D.1

Power Switch

Figure C.1

Power Outlet

To Computer

AC Power

Cord

1. Cables pass through in this hole.

2. Connect each connector.

3. Replace connector cover with

cables passing through upper

opening.

Signal

Cable

INPUT2

INPUT1

AC-IN

01b_English 13.12.2000, 11:50 Uhr4

English-5

English

Push

Marking area

(1. Push)

Marking

Figure E.1

I. Cable Cover

How to remove this cover.

1. Push marking area

2. Slide to up side

3. Remove

II. Connector Cover

How to remove this cover.

1. Push under side

2. Remove

01b_English 13.12.2000, 11:50 Uhr5

English-6

Tilt

Grasp both sides of the monitor screen with

your hands and adjust the tilt as desired

(Figure TS.1).

Remove Monitor Stand

for Mounting

To prepare the monitor for alternate mounting

purposes:

1. Remove the connector

cover, hinge cover and

cable cover. (Figure R.1)

2. Disconnect all cables.

3. Place monitor face down

on a non-abrasive

surface.

(Place the screen on a

32 mm platform so that

hole of stand match to

screw location)

(Figure R.2).

4. Remove the 4 srcews

connecting the monitor to the

stand and lift off the stand

assembly (Figure R.2) the monitor

is now ready for mounting in an

alternate manner.

5. Connect the AC cord and signal

cable to the back of the monitor.

6. Reverse this process to reattach

stand.

Caution:To fulfil the safety requirements

the monitor must be mounted to

an arm which guaranties the

necessary stability under

consideration of the weight of the

monitor. The LCD monitor shall

only be used with an approved

arm (e.g. GS mark).

Figure TS.1

Figure R.1

Push

Figure R.2

Screws

01b_English 13.12.2000, 11:50 Uhr6

English-7

English

Sub-Menu

Exits to the OSM controls

main menu.

Moves the highlighted area

up/down to select one of the

controls.

Moves the bar left/right to

increase or decrease the

adjustment.

Activates Auto Adjust feature.

In Tools and Information

Mode, opens additional

window.

Resets the highlighted control

to the factory setting.

Main Menu

Exits the OSM controls.

Moves the highlighted

area up/down to select

one of the controls.

Moves the highlighted

area left/right to select

control menus.

Has no function.

Push PROCEED to

activate Auto Adjust.

Resets the highlighted

control menu to the

factory setting.

Controls

OSM (On-Screen-Manager) Controls

The OSM controls on the front of the monitor function as follows:

To access OSM press any of the control buttons ( , , , ).

To change signal input, press the INPUT 1/2 button.

NOTE: When RESET is pressed in the main and sub-menu, a warning

window will appear allowing you to cancel the RESET function

by pressing the EXIT button.

Brightness/Contrast Controls

BRIGHTNESS

Adjusts the overall image and background screen

brightness.

CONTRAST

Adjusts the image brightness in relation to the

background.

AUTO ADJUST

Adjusts the image displayed for non-standard video

inputs.

Control

EXIT

CONTROL /

PROCEED

RESET

01b_English 13.12.2000, 11:50 Uhr7

English-8

Auto Adjust

Automatically adjusts the Image Position, the H. Size

and Fine setting.

Position Controls

LEFT/RIGHT

Controls Horizontal Image Position within the display

area of the LCD.

UP/DOWN

Controls Vertical Image Position within the display area

of the LCD.

AUTO ADJUST

Automatically sets the Horizontal and Vertical Image

Position within the display area of the LCD.

Image Adjust Controls

H. SIZE

Adjusts the horizontal size by increasing or decreasing

this setting.

FINE

Improves focus, clarity and image stability by increasing

or decreasing this setting.

AUTO ADJUST

Automatically adjusts the H. Size and Fine setting.

Color Control Systems

Six color presets select the desired color setting (sRGB

and NATIVE color presets are standard and cannot be

changed). Color temperature increases or decreases in

each preset.

R,Y,G,C,B,M,S

Increases or decreases Red, Yellow, Green, Cyan, Blue,

Magenta and Saturation depending upon which is

selected. The change in color will appear on screen and

the direction (increase or decrease) will be shown by

the color bars.

01b_English 13.12.2000, 11:50 Uhr8

English-9

English

sRGB

sRGB mode dramatically improves the color fidelity in

the desktop environment by a single standard RGB

color space. With this color supported environment, the

operator could easily and confidently communicate

colors without further color management overhead in

the most common situations.

NATIVE

Original color presented by the LCD panel that is

unadjustable.

Tools 1

SMOOTHING

Select one of three image sharpness settings. This

function is only valid when the expanded display

function (expansion function) is on.

TEXT MODE

Use this to display text clearly.

NORMAL MODE

This sharpness is between TEXT and GRAPHIC

MODE.

GRAPHIC MODE

This mode is suited for images and photographs.

EXPANSION MODE

Sets the zoom method.

FULL SCREEN

The image is expanded to 1280 x 1024, regardless of

the resolution.

KEEP ASPECT

The image is expanded without changing the aspect

ratio.

EXPANSION OFF

The image is not expanded.

01b_English 13.12.2000, 11:50 Uhr9

English-10

VIDEO DETECT

Selects the method of video detection when more than

one computer is connected.

NONE

The Monitor will not search the other video input port

unless the monitor is turned on.

FIRST DETECT

The video input has to be switched to “FIRST

DETECT” mode. When current video input signal is

not present, then the monitor searches for a video

signal from the other video input port. If the video

signal is present in the other port, then the monitor

switches the video source input port to the new found

video source automatically. The monitor will not look

for other video signals while the current video source

is present.

LAST DETECT

The video input has to be switched to the “LAST

DETECT” mode. When the monitor is displaying a

signal from the current source and a new secondary

source is supplied to the monitor, then the monitor will

automatically switch to the new video source. When

current video input signal is not present, then the

monitor searches for a video signal from the other

video input port. If the video signal is present in the

other port, then the monitor switches the video source

input port to the new found video source

automatically.

Tools 2

LANGUAGE

OSM control menus are available in seven languages.

OSM POSITION

You can choose where you would like the OSM control

image to appear on your screen. Selecting OSM

Location allows you to manually adjust the position of

the OSM control menu left, right, up or down.

01b_English 13.12.2000, 11:50 Uhr10

English-11

English

OSM TURN OFF

The OSM control menu will stay on as long as it is use.

In the OSM Turn Off submenu, you can select how long

the monitor waits after the last touch of a button to shut

off the OSM control menu. The preset choices are 10,

20, 30, 60 and 120 seconds.

OSM LOCK OUT

This control completely locks out access to all OSM

control functions. When attempting to activate OSM

controls while in the Lock Out mode, a screen will

appear indicating the OSM controls are locked out. To

activate the OSM Lock Out function, press PROCEED,

then and hold down simultaneously. To de-activate the

OSM Lock Out, press PROCEED, then and hold

down simultaneously.

FACTORY PRESET

Selecting Factory Preset allows you to reset all OSM

control settings back to the factory settings. The RESET

button will need to be held down for several seconds to

take effect. Individual settings can be reset by

highlighting the control to be reset and pressing the

RESET button.

RESOLUTION NOTIFIER

This optimal resolution is 1280 x 1024. If ON is

selected, a message will appear on the screen after

30 seconds, notifying you that the resolution is not at

1280 x 1024.

Information

DISPLAY MODE

Provides information about the current resolution

display and technical data including the preset timing

being used and the horizontal and vertical frequencies.

MONITOR INFO

Indicates the model and serial numbers of your monitor.

01b_English 13.12.2000, 11:50 Uhr11

English-12

OSM Warning

OSM Warning menus disappear with Exit button.

NO SIGNAL: This function gives a warning when there

is no signal present. After power is turned on or when

there is a change of input signal or video is inactive, the

No Signal window will appear.

RESOLUTION NOTIFIER: This function gives a

warning of use with optimized resolution. After power is

turned on or when there is a change of input signal or

the video signal doesn’t have proper resolution, the

Resolution Notifier window will open. This function can

be disabled in the TOOL menu.

OUT OF RANGE: This function gives a

recommendation of the optimized resolution and refresh

rate. After the power is turned on or there is a change of

input signal or the video signal doesn’t have proper

timing, the Out Of Range menu will appear.

CHECK CABLE: This function will advise you to check

all Video Inputs on the monitor and computer to make

sure they are properly connected.

01b_English 13.12.2000, 11:50 Uhr12

English-13

English

Recommended Use

Safety Precautions and Maintenance

FOR OPTIMUM PERFORMANCE, PLEASE NOTE

THE FOLLOWING WHEN SETTING UP AND

USING THE MULTISYNC LCD COLOR MONITOR:

• DO NOT OPEN THE MONITOR. There are no user serviceable parts

inside and opening or removing covers may expose you to dangerous

shock hazards or other risks. Refer all servicing to qualified service

personnel.

• Do not spill any liquids into the cabinet or use your monitor near water.

• Do not insert objects of any kind into the cabinet slots, as they may

touch dangerous voltage points, which can be harmful or fatal or may

cause electric shock, fire or equipment failure.

• Do not place any heavy objects on the power cord. Damage to the cord

may cause shock or fire.

• Do not place this product on a sloping or unstable cart, stand or table, as

the monitor may fall, causing serious damage to the monitor.

• Do not place any objects onto the monitor and do not use the monitor

outdoors.

• The inside of the flourescent tube located within the LCD monitor

contains mercury. Please follow the bylaws or rules of your municipality

to dispose of the tube properly.

Immediately unplug your monitor from the wall outlet and refer servicing to

qualified service personnel under the following conditions:

• When the power supply cord or plug is damaged.

• If liquid has been spilled, or objects have fallen into the monitor.

• If the monitor has been exposed to rain or water.

• If the monitor has been dropped or the cabinet damaged.

• If the monitor does not operate normally by following operating

instructions.

• Do not bend power cord.

• Do not use monitor in high temperatured, humid, dusty, or oily areas.

• Do not cover vent on monitor.

• If monitor is broken, do not come in contact with the liquid crystal.

• If glass is broken. Handle with care.

01b_English 13.12.2000, 11:50 Uhr13

English-14

Caution

• Allow adequate ventilation around the monitor so that

heat can properly dissipate. Do not block ventilated

openings or place the monitor near a radiator or other

heat sources. Do not put anything on top of monitor.

• The power cable connector is the primary means of

detaching the system from the power supply. The

monitor should be installed close to a power outlet which

is easily accessible.

• Handle with care when transporting. Save packaging for

transporting.

CORRECT PLACEMENT AND ADJUSTMENT OF

THE MONITOR CAN REDUCE EYE, SHOULDER

AND NECK FATIGUE. CHECK THE FOLLOWING

WHEN YOU POSITION THE MONITOR:

• For optimum performance, allow

20 minutes for warm-up.

• Adjust the monitor height so that the top of

the screen is at or slightly below eye level.

Your eyes should look slightly downward

when viewing the middle of the screen.

• Position your monitor no closer than 40 cm

and no further away than 70 cm from your

eyes. The optimal distance is 50 cm.

• Rest your eyes periodically by focusing on

an object at least 6 m away. Blink often.

• Position the monitor at a 90° angle to windows and other light sources to

minimize glare and reflections. Adjust the monitor tilt so that ceiling lights

do not reflect on your screen.

• If reflected light makes it hard for you to see your screen, use an anti-

glare filter.

• Clean the LCD monitor surface with a lint-free, non-abrasive cloth. Avoid

using any cleaning solution or glass cleaner!

• Adjust the monitor’s brightness and contrast controls to enhance

readability.

• Use a document holder placed close to the screen.

• Position whatever you are looking at most of the time (the screen or

reference material) directly in front of you to minimize turning your head

while you are typing.

01b_English 13.12.2000, 11:50 Uhr14

English-15

English

• Avoid displaying fixed patterns on the monitor for long periods of time to

avoid image persistence (after-image effects).

• Get regular eye checkups.

Ergonomics

To realize the maximum ergonomics benefits, we recommend the following:

• Adjust the Brightness until the background raster disappears

• Do not position the Contrast control to its maximum setting

• Use the preset Size and Position controls with standard signals

• Use the preset Color Setting

• Use non-interlaced signals with a vertical refresh rate between

60-75 Hz

• Do not use primary color blue on a dark background, as it is difficult to

see and may produce eye fatigue to insufficient contrast

01b_English 13.12.2000, 11:50 Uhr15

English-16

TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS UNIT TO RAIN

OR MOISTURE. ALSO, DO NOT USE THIS UNIT’S POLARIZED PLUG WITH AN

EXTENSION CORD RECEPTACLE OR OTHER OUTLETS UNLESS THE PRONGS

CAN BE FULLY INSERTED.

REFRAIN FROM OPENING THE CABINET AS THERE ARE HIGH VOLTAGE

COMPONENTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

CAUTION

TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER

(OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING

TO QUALIFIED SERVICE PERSONNEL.

This symbol warns user that uninsulated voltage within the unit may have

sufficient magnitude to cause electric shock. Therefore, it is dangerous to make

any kind of contact with any part inside this unit.

This symbol alerts the user that important literature concerning the operation

and maintenance of this unit has been included. Therefore, it should be read

carefully in order to avoid any problems.

CAUTION

WARNING

RISK OF ELECTRIC SHOCK • DO NOT OPEN

Caution:

When operating the MultiSync LCD1830 with a 220-240V AC power source in

Europe except UK, use the power cord provided with the monitor.

In the UK, a BS approved power cord with a moulded plug has a Black (five Amps)

fuse installed for use with this equipment. If a power cord is not supplied with this

equipment please contact your supplier.

When operating the MultiSync LCD1830 with a 220-240V AC power source in

Australia, use the power cord provided with the monitor.

For all other cases, use a power cord that matches the AC voltage of the power

outlet and has been approved by and complies with the safety standard of your

particular country.

ENERGYSTA R is a U.S. trademark.

As an ENERGYSTA R

®

Partner, NEC-Mitsubishi Electronics Display of America, Inc. has

determined that this product meets the ENERGYSTA R guidelines for energy efficiency. The

ENERGYSTA R emblem does not represent EPA endorsement of any product or service.

IBM PC/XT/AT, PS/2, MCGA, VGA, 8514/A and XGA are registered trademarks of

International Business Machines Corporation.

Apple and Macintosh are registered trademarks of Apple Computer Inc.

Microsoft and Windows are registered trademarks of the Microsoft Corporation.

NEC is a registered trademark of NEC Corporation.

All other trademarks or registered trademarks are property of their respective owners.

01b_English 13.12.2000, 11:50 Uhr16

La page charge ...

NEC MultiSync® LCD1830 Le manuel du propriétaire

Ce manuel convient également à

NEC MultiSync® LCD1830 Le manuel du propriétaire

dans d''autres langues

Documents connexes