NEC MultiSync® LCD1525X Le manuel du propriétaire

MultiSync LCD1525X

User’s Manual

UÏivatelská pﬁíruãka

Bedienerhandbuch

δηγίες ρήσης

Manual del usuario

Manuel Utilisateur

Manuale utente

Gebruikershandleiding

Podr´cznik u˝ytkowinka

Руководство пользователя

Kullan∂c∂ Klavuzu

00Cover_all.p65 10.10.2000, 18:38 Uhr1

A.1 A.2

B.1 B.2

00Cover_all.p65 10.10.2000, 18:38 Uhr2

C.1

DVI

D-SUB

A

B

00Cover_all.p65 10.10.2000, 18:38 Uhr3

A

B

D.1

E.1

G.1

F.1

00Cover_all.p65 10.10.2000, 18:38 Uhr4

English

âesky

Deutsch

Ελληνικά

Español

Français

Italiano

Nederlands

Polski

Русский

Türkçe

01b_XChapterOpener 10.10.2000, 18:38 Uhr1

01b_XChapterOpener 10.10.2000, 18:38 Uhr2

English-1

English

Declaration of the Manufacturer

We hereby certify that the colour monitor

MultiSync LCD1525X (LA-1526HMW)

are in compliance with

Council Directive 73/23/EEC:

- EN 60950

Council Directive 89/336/EEC:

- EN 55022

- EN 61000-3-2

- EN 61000-3-3

- EN 55024

and marked with

NEC-Mitsubishi Electric Visual Systems, Corp.

686-1, NISHIOI OI-MACHI

ASHIGARAKAMI-GUN

KANAGAWA 258-8533, JAPAN

01b_english 10.10.2000, 18:38 Uhr1

English-2

Contents

Your new NEC MultiSync LCD monitor box should contain the following:

– NEC MultiSync LCD1525X.

– AC Power Cable.

– DVI-A to VGA Cable.

– DVI-D to DVI-D Video Signal Cable.

– USB Cable.

– CD-ROM includes complete User‘s Manual in PDF format and

Windows related files (Inf file and color profile). To see the complete

User‘s Manual, Acrobat Reader 4.0 must be installed on your PC.

– User’s Manual.

Remember to save your original box and packing material to transport or

ship the monitor.

DV

I/D

-SU

B

NEC MultiSync LCD1525X

monitor with DVI-A to VGA Cable.

01b_english 10.10.2000, 18:38 Uhr2

English-3

English

Installation

To attach the MultiSync LCD1525X monitor to your system, follow these

instructions:

1. Turn off the power of your computer.

2. For the PC with DVI digital output: Connect the DVI-D to DVI-D

signal cable to the connector of the display card in your system

(Figure A.1). Tighten all screws.

For the PC with analog output: Connect the DVI-A to VGA cable to

the connector of the display card in your system (Figure A.2).

To connect a secondary PC with analog output, connect the

MultiSync LCD1525X D-SUB to D-SUB (not included) cable to the

connector of the display card in your system.

For the Mac: Connect the MultiSync Macintosh cable adapter to the

computer (Figure B.1). Attach the 15-pin mini D-SUB signal cable to

the MultiSync Macintosh cable adapter (Figure B.1).

NOTE: Macintosh G3 and G4 do not need a Macintosh cable

adapter.

3. Remove connector cover and cable cover. Connect the DVI signal

cable to the connector on the back of the monitor. Place the DVI

video signal cable under Clip A.

Replace connector cover and cable cover.

4. Using the USB cable, connect the B type connector to the USB

upstream port on the back of the monitor and A type connector to the

downstream part on the computer (Figure D.1). If you are using the

cord from the USB device, use one of the downstream ports on the

side of the monitor (Figure E.1).

NOTE: Incorrect cable connections may result in irregular

operation, damage display quality/components of LCD

module and/or shorten the module’s life.

5. Connect one end of the power cord to the MultiSync LCD Series

monitor and the other end to the power outlet (Figure F.1).

6. Turn on the monitor (Figure G.1) and the computer.

01b_english 10.10.2000, 18:38 Uhr3

English-4

Controls

INPUT SELECT

If no OSM menu is displayed, video input and USB upstream can be

changed by pressing the PROCEED button.

: changing only video

: changing video and USB

OSM Controls

The OSM controls on

the front of the monitor

provide the following

functions:

To access OSM press any of the control buttons ( , , , ) or the

PROCEED button

7. To complete the setup of your MultiSync LCD monitor, use the

following OSM controls:

• Auto Adjust Contrast

• Auto Adjust

Refer to the Controls section of this User’s Manual for a full

description of these OSM controls.

NOTE: If you have any problems, please refer to the

Troubleshooting section of this User’s Manual.

01b_english 10.10.2000, 18:38 Uhr4

English-5

English

Sub-Menu

Exits to the OSM controls

main menu.

Moves the highlighted area

up/down to select one of the

controls.

Moves the bar in the + or -

direction to increase or

decrease the adjustment.

Activates Auto Adjust feature.

In Tool and Information Mode,

opens additional window.

Resets the higlighted control

to the factory setting.

EXIT

CONTROL /

PROCEED

RESET

Main Menu

Exits the OSM controls.

Moves the highlighted

area up/down to select

one of the controls.

Proceeds to the selected

menu choice (indicated

by the highlighted area).

Has no function.

Resets the highlighted

control menu to the

factory setting.

NOTE: When RESET is pressed, a warning window will appear

allowing you to cancel the RESET function.

Brightness and Contrast

This function is control of brightness and video contrast.

BRIGHTNESS

Adjusts the overall image and background screen

brightness.

CONTRAST

Adjusts the image brightness in relation to the

background.

AUTO ADJUST (Analog Input Only)

Corrects the image displayed for non-standard video

inputs.

Auto Adjust (Analog Input Only)

Adjusts the Position, H. size and Fine controls.

Position (Analog Input Only)

This function controls image position within the display

area of the LCD.

01b_english 10.10.2000, 18:38 Uhr5

English-6

LEFT/RIGHT

Position control for horizontal image position.

DOWN/UP

Position control for vertical image position.

AUTO ADJUST

Automatically sets the horizontal and vertical image

position within the display area of the LCD.

Image Adjust (Analog Input Only)

H. SIZE

Adjusts the horizontal size by increasing or decreasing

this setting.

FINE

This function is used for adjustment of the delay of

internal clock to arrange image focus. Factory setting is

”Zero” as minimum value.

AUTO ADJUST

Automatically adjusts the H. Size or Fine settings.

Colour Control System

Preset 1, 2, 3, 4, 5

Colour presets 1 trough 5 selects the desired colour

setting.

Each colour setting is adjusted the factory to that stated

degree Kelvin. If a setting is adjusted, the name of

setting will change from degree Kelvin to Custom.

Colour Gain RED, GREEN, BLUE

This function is controls the video contrast of R/G/B

independently. The change in colour will appear on

screen and the direction (increase or decrease) will

shown Colour gain control range is from about 0% to

100%.

Factory setting is preset number 2, and R,G,B setting

value is 100%.

01b_english 10.10.2000, 18:38 Uhr6

English-7

English

Tools

LANGUAGE

OSM control menus are available in seven languages.

OSM POSITION

You can choose where you would like the OSM control

image to appear on your screen. Selecting OSM

Location allows you to manually adjust the position of

the OSM control menu left, right, up or down.

OSM TURN OFF

The OSM control menu will stay on as long as it is in

use. In the OSM Turn Off sub-menu, you can select how

long the monitor waits after the last touch of a button to

shut off the OSM control menu. The preset choices are

10, 20, 30, 60 and 120 seconds.

OSM LOCK OUT

This control completely locks out access to all OSM

control functions. When attempting to activate OSM

controls while in the Lock Out mode, a screen will

appear indicating the OSM controls are locked out. To

activate the OSM Lock Out function, simultaneously

press and hold down the PROCEED and buttons.

To deactivate the OSM Lock Out mode, again

simultaneously press and hold down the PROCEED

and buttons.

VIDEO DETECT

Selects the method of video detection when two

computers are connected.

NONE

The Monitor will never switch ports automatically, only

by user control.

01b_english 10.10.2000, 18:38 Uhr7

English-8

FIRST DETECT

The video input has to be switched to “FIRST DETECT”

mode. When current video input signal is not present,

then the monitor searches for a video signal from the

other video input port. If the video signal is present in

the other port, then the monitor switches the video

source input port to the new found video source

automatically. The monitor will not look for other video

signals while the current video source is present.

LAST DETECT

The video input has to be switched to the “LAST

DETECT” mode. When the monitor is displaying a signal

from the current source and a new secondary source is

supplied to the monitor, then the monitor will automati-

cally switch to the new video source. When current

video input signal is not present, then the monitor

searches for a video signal from the other video input

port. If the video signal is present in the other port, then

the monitor switches the video source input port to the

new found video source automatically.

DVI SELECTION

This function is selected the DVI input mode. When the

DVI selection has been changed, you must restart your

computer.

DIGITAL

DVI digital input is available.

ANALOG

DVI analog input is available.

FACTORY PRESET

Selecting Factory Preset allows you to reset all OSM

control settings back to the factory settings. The RESET

button will need to be held down for several seconds to

take effect. Individual settings can be reset by

highlighting the control to be reset and pressing the

RESET button.

01b_english 10.10.2000, 18:38 Uhr8

English-9

English

RESOLUTION NOTIFIER

This optimal resolution is 1024 x 768. If ON is selected,

a message will appear on the screen after 30 seconds,

notifying you that the resolution is not at 1024 x 768.

Information

DISPLAY MODE

Provides information about the current resolution

display and technical data including the preset timing

being used and the horizontal and vertical frequencies.

MONITOR INFO

Indicates the model and serial numbers of your monitor.

OSM Warning

No Signal: This function gives a warning when there is

no signal present. After power is turned on or when

there is a change of input signal or video is inactive, the

No Signal window will appear. The PROCEED button

opens the DVI SELECTION CONTROL, as indicated in

the section for DVI selection.

Resolution Notifier: This function gives a warning of

use with optimized resolution. After power is turned on

or when there is a change of input signal or the video

signal doesn’t have proper resolution, the Resolution

Notifier window will open. This function can be disable

in the TOOL menu.

Out of Range: This function gives a recommendation of

the optimized resolution and refresh rate. After the

power is turned on or there is a change of input signal

or the video signal doesn’t have proper timing, the Out

Of Range menu will appear. The PROCEED button

opens the DVI SELECTION CONTROL, as indicated in

the section for DVI selection.

Check Cable: This function will advise you to check all

Video Inputs on the monitor and computer to make sure

they are properly connected.

01b_english 10.10.2000, 18:38 Uhr9

English-10

Recommended Use

Safety Precautions and Maintenance

For optimum performance, please note the following when setting up

and using the MultiSync LCD colour monitor:

• DO NOT OPEN THE MONITOR. There are no user serviceable parts

inside and opening or removing covers may expose you to dangerous

shock hazards or other risks. Refer all servicing to qualified service

personnel.

• Allow adequate ventilation around the monitor so that heat can

properly dissipate. Do not block ventilated openings or place the

monitor near a radiator or other heat sources. Do not put anything on

top of monitor.

• Do not spill any liquids into the cabinet or use your monitor near

water.

• Do not insert objects of any kind into the cabinet slots, as they may

touch dangerous voltage points, which can be harmful or fatal or may

cause electric shock, fire or equipment failure.

• Do not place any heavy objects on the power cord. Damage to the

cord may cause shock or fire.

• Do not place this product on a sloping or unstable cart, stand or

table, as the monitor may fall, causing serious damage to the monitor.

• The power cable connector is the primary means of detaching the

system from the power supply. The monitor should be installed close

to a power outlet that is easily accessible.

• When operating the MultiSync LCD monitor with its AC100-240V

power supply, use a power supply cord that matches the power

supply voltage of the AC power outlet being used. The power supply

cord you use must have been approved by and comply with the safety

standards of your country.

• Handle with care when transporting. Save packaging for trans-

porting.

• The inside of the fluorescent tube located within the LCD monitor

contains mercury. Please follow the bylaws or rules of your local

municipality to dispose of this tube properly.

• Do not bend power cord.

• Do not use monitor in high temperatured, humid, dusty, or oily areas.

• Do not cover vent on monitor.

01b_english 10.10.2000, 18:38 Uhr10

English-11

English

• If monitor is broken, do not come in contact with the liquid crystal.

• If glass is broken. Handle with care.

Immediately unplug your monitor from the wall outlet and refer servicing

to qualified service personnel under the following conditions:

• When the power supply cord or plug is damaged.

• If liquid has been spilled or objects have fallen into the monitor.

• If the monitor has been exposed to rain or water.

• If the monitor has been dropped or the cabinet is damaged.

CORRECT PLACEMENT AND ADJUSTMENT OF THE MONITOR CAN

REDUCE EYE, SHOULDER AND NECK FATIGUE. CHECK THE

FOLLOWING WHEN YOU POSITION THE MONITOR:

• For optimum performance, allow 20 minutes for warm-up.

• Adjust the monitor height so that the top of the screen is at or slightly

below eye level. Your eyes should look slightly downward when

viewing the middle of the screen.

• Position your monitor no closer than 40 cm and no further away than

70 cm from your eyes. The optimal distance is 53 cm for the

MultiSync LCD1525X monitor.

• Rest your eyes periodically by focusing on an object at least 6 m

away. Blink often.

• Position the monitor at a 90° angle to windows and other light

sources to minimize glare and reflections. Adjust the monitor tilt so

that ceiling lights do not reflect on your screen.

• If reflected light makes it hard for you to see your screen, use an anti-

glare filter.

• Clean the LCD monitor surface with a lint-free, non-abrasive cloth.

Avoid using any cleaning solution or glass cleaner!

• Adjust the monitor’s brightness and contrast controls to enhance

readability.

• Use a document holder placed close to the screen.

• Position whatever you are looking at most of the time (the screen or

reference material) directly in front of you to minimize turning your

head while you are typing.

• Avoid displaying fixed patterns on the monitor for long periods of time

to avoid image persistence (after-image effects).

• Get regular eye checkups.

01b_english 10.10.2000, 18:38 Uhr11

English-12

TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS UNIT TO RAIN

OR MOISTURE. ALSO, DO NOT USE THIS UNIT’S POLARIZED PLUG WITH AN

EXTENSION CORD RECEPTACLE OR OTHER OUTLETS UNLESS THE PRONGS

CAN BE FULLY INSERTED.

REFRAIN FROM OPENING THE CABINET AS THERE ARE HIGH VOLTAGE

COMPONENTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

CAUTION

TO REDUCE THE RISK OF ELECTRIC SHOCK, MAKE SURE POWER CORD

IS UNPLUGGED FROM WALL SOCKET. TO FULLY DISENGAGE THE

POWER TO THE UNIT, PLEASE DISCONNECT THE POWER CORD FROM

THE AC OUTLET. DO NOT REMOVE COVER (OR BACK). NO USER

SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED

SERVICE PERSONNEL.

This symbol warns user that uninsulated voltage within the unit may have

sufficient magnitude to cause electric shock. Therefore, it is dangerous to make

any kind of contact with any part inside this unit.

This symbol alerts the user that important literature concerning the operation

and maintenance of this unit has been included. Therefore, it should be read

carefully in order to avoid any problems.

CAUTION

WARNING

RISK OF ELECTRIC SHOCK • DO NOT OPEN

ENERGYSTA R is a U.S. trademark.

As an E

NERGYSTAR

®

Partner, NEC-Mitsubishi Electronics Display of America, Inc. has determined that this product meets the

E

NERGYSTAR guidelines for energy efficiency. The ENERGYSTA R emblem does not represent EPA endorsement of any product or

service.

IBM PC/XT/AT, PS/2, MCGA, VGA, 8514/A and XGA are registered trademarks of International Business Machines Corporation.

Apple and Macintosh are registered trademarks of Apple Computer Inc.

Microsoft and Windows are registered trademarks of the Microsoft Corporation.

NEC is a registered trademark of NEC Corporation.

All other trademarks or registered trademarks are property of their respective owners.

Safety Instruction

01b_english 10.10.2000, 18:38 Uhr12

âesky-1

âesky

Prohlá‰ení v˘robce

Tímto prohla‰ujeme, Ïe barevn˘ monitor

MultiSync LCD1525X (LA-1526HMW)

je v souladu se

smûrnicemi 73/23/EEC:

- EN 60950

smûrnicemi 89/336/EEC:

- EN 55022

- EN 61000-3-2

- EN 61000-3-3

- EN 55024

a opatﬁen oznaãením

NEC-Mitsubishi Electric Visual Systems, Corp.

686-1, NISHIOI OI-MACHI

ASHIGARAKAMI-GUN

KANAGAWA 258-8533, JAPAN

02b_Czech 10.10.2000, 18:38 Uhr1

âesky-2

Obsah dodávky

Dodávka nového monitoru LCD NEC MultiSync by mûla obsahovat

následující poloÏky:

– NEC MultiSync LCD1525X.

– napájecí ‰ÀÛru,

– kabel k propojení DVI-A s VGA,

– kabel pro video signál k propojení DVI-D s DVI-D,

– kabel USB,

– CD-ROM obsahuje kompletní uÏivatelskou pﬁíruãku ve formátu PDF a

soubory pro systém Windows (soubor Inf a barevn˘ profil). Pro

zobrazení kompletní uÏivatelské pﬁíruãky musíte mít na poãítaãi

nainstalovanou aplikaci Acrobat Reader 4.0.

– uÏivatelskou pﬁíruãku.

PÛvodní karton a balicí materiál si uschovejte pro pﬁípadnou pﬁepravu

monitoru.

DV

I/D

-SU

B

Monitor NEC MultiSync

LCD1525X s kabelem

DVI-A-VGA.

02b_Czech 10.10.2000, 18:38 Uhr2

La page charge ...

NEC MultiSync® LCD1525X Le manuel du propriétaire

Ce manuel convient également à

NEC MultiSync® LCD1525X Le manuel du propriétaire

dans d''autres langues

Documents connexes