Blastrac BDC-22-110V Le manuel du propriétaire

BDC-22-110V

C455 US-F-E

05/2018

US

INSTRUCTIONS MANUAL

F

E

MANUEL D’INSTRUCTIONS

MANUAL DE INSTRUCCIONES

www.blastrac.com ‒ [email protected]

Instruction manual BDC-22-110V

1/16

I

US

Table of contents

Instructions for use .........................................................................................................2

General information for using the vacuum cleaner .......................................................................... 2

Proper uses ..................................................................................................................................... 2

Improper Use ................................................................................................................................... 3

Versions and variations ................................................................................................................... 3

Dust emissions in the environment ................................................................................................. 3

General recommendations .............................................................................................................. 3

Vacuum cleaner description...........................................................................................4

Vacuum Cleaner Parts and Labels .................................................................................................. 4

Optional Kits .................................................................................................................................... 4

Accessories ..................................................................................................................................... 4

Packing and unpacking ................................................................................................................... 4

Unpacking, moving, use and storage .............................................................................................. 4

Setting to work - connection to the power supply ............................................................................ 5

Extensions ....................................................................................................................................... 5

Dry applications ............................................................................................................................... 5

Maintenance and repairs ................................................................................................................. 5

Technical data ................................................................................................................................. 6

Dimensions ...................................................................................................................................... 6

Controls and indicators .................................................................................................................... 7

Inspections before starting .............................................................................................................. 7

Starting and stopping the vacuum cleaner ...................................................................................... 7

Operation ......................................................................................................................................... 7

Primary lter shaker ........................................................................................................................ 8

Emergency stopping ........................................................................................................................ 8

Replacement of dust bags ............................................................................................................... 8

Maintenance, cleaning and decontamination .................................................................................. 8

Main and absolute lter disassembly and replacement ................................................................... 9

Longopac

®

replacement ............................................................................................................... 10

At the end of a cleaning session ................................................................................................... 10

Tightness inspection ...................................................................................................................... 10

Wiring diagrams ............................................................................................................................ 10

Procedure for Longopac

®

system installation .................................................................................11

Procedure for hose removal .......................................................................................................... 13

Recommended spare parts ..........................................................................................14

Troubleshooting ............................................................................................................15

Translation of original instructions

www.blastrac.com ‒ [email protected]

Instruction manual BDC-22-110V

2/16

I

US

Instructions for use

SAVE THESE INSTRUCTIONS

- Do not use to pick up ammable or combustible liquids,

such as gasoline, or use in areas where they may be

present.

- Do not pick up anything that is burning or smoking, such

as cigarettes, matches, or hot ashes.

- Do not use without dust bag/or lters in place.

- Connect to a properly grounded outlet only. See ground-

ing instructions.

- Unplug before connecting any mechanical accessory.

General information for using the vacuum

cleaner

Use the vacuum cleaner in accordance with the laws in force in

the country where it is used.

Besides the operating instructions and the laws in force in the

country where the device is used, the technical regulations for

ensuring safe and correct operation must also be observed.

Do not perform any operation that could jeopardize the safety

of people, property and the environment.

Comply with the safety indications and prescriptions in this

instruction manual.

Proper uses

This vacuum cleaner is suitable for commercial use, in hotels,

schools, hospitals, factories, shops, oces and apartment

buldings for example, for hire and in any case for purposes

other than normal domestic use.

This vacuum cleaner is suitable for cleaning and vacuuming

solid materials in indoor environments.

■ Always leave enough room around the vacuum cleaner to

reach the controls easily.

The vacuum cleaner has been designed to be used by one

operator only.

This vacuum cleaner consists of an automated vacuum

unit, with a lter upstream and a container for collecting the

vacuumed material.

READ ALL THE OPERATING INSTRUCTIONS BEFORE USING

THIS APPLIANCE

Comply with the important safety recommendations identied by the word WARNING!

Operator’s safety

WARNING!

Before starting the vacuum cleaner, it

is absolutely essential to read these

operating instructions and to keep them

on hand for consultation.

The vacuum cleaner can only be used by people who

are familiar with the way it works and who have been

explicitly authorised and trained for the purpose.

Before using the vacuum cleaner, the operators

must be informed, instructed and trained on how

to work it and for which substances its usage is

permitted including the safe method for removing

and disposing of the vacuumed material.

IMPORTANT SAFETY INSTRUCTIONS

To reduce the risk of re, electric shock, or injury:

- Do not leave the appliance unattended when plugged in.

Unplug from outlet when not in use and before servicing.

- To reduce the risk of an electric shock, do not use outdoors.

- To reduce the risk of electric shock, always install oat

before any wet pick-up operation

- Do not allow this appliance to be used as a toy. This ma-

chine is for adult-use only. Close attention is necessary

when used by or near children.

- Use only as described in this manual. Use only the manu-

facturer’s recommended attachments.

- Do not use with damaged cord or plug. If appliance is not

working as it should, has been dropped, damaged, left

outdoors or dropped into water, return it to a service center.

- Do not pull or carry by the cord, use cord as a handle,

close a door on cord, or pull cord around sharp edges or

corners. Do not run the appliance over the cord. Keep

cord away from heated surfaces.

- Do not unplug by pulling on cord. To unplug, grasp the

plug, not the cord.

- Do not handle plug, cord or appliance with wet hands.

- Do not put any object into the openings. Do not use with

any opening blocked; keep free from dust, lint, hair, and

anything that may reduce airow.

- Keep hair, loose clothing, ngers, and all parts of the body

away from openings and moving parts.

- Turn o all controls before unplugging.

- Use extra care when cleaning stairs.

www.blastrac.com ‒ [email protected]

Instruction manual BDC-22-110V

3/16

I

US

Improper Use

WARNING!

The following use of the device is strictly forbidden:

■ Outdoors.

■ When not placed on level ground. hen not used on

level horizontal surfaces.

■ When the ltering unit is not installed.

■ When the vacuum inlet and/or hose are turned to

face parts of the human body.

■ Use without the cover on the vacuum unit.

■ When the dust container is not installed.

■ Use without the guards, protective covers and

safety systems installed by the manufacturer.

■ When the cooling vents are partially or totally

clogged.

■ When the vacuum cleaner is covered with plastic

or fabric sheets.

■ Use with the air outlet partially or totally closed.

■ When used in narrow areas where there is no fresh

air.

■ Vacuuming liquids with vacuum cleaners not

equipped with specic original stopping systems.

■ Vacuuming the following materials:

1. Burning materials (embers, hot ashes, lit

cigarettes, etc.).

2. Open ames.

3. Combustible gas.

4. Flammable liquids, aggressive fuels (gasoline,

solvents, acids, alkaline solutions, etc.).

5. Explosive dust/substances and/or ones liable

to ignite in a spontaneous way (such as

magnesium or aluminium dusts, etc.).

Important: Fraudulent use is not admitted.

Under no circumstances may this vacuum cleaner be used

safely for the collection of hazardous or toxic materials unless

equipped with an absolute (HEPA/ULPA) lter.

Be sure to install the HEPA/ULPA lter according to Nilsk’s

written instructions.

Do not use this cleaner for the removal of hazardous substances

unless you are licensed and/or certied for this work by the

authorities having jurisdiction.

Versions and variations

HEPA

This vacuum cleaner can be equipped with an absolute (HEPA)

lter for vacuuming dust hazardous to one’s health. The

procedures for servicing and emptying the vacuum cleaner

including removing the dust container, must only be performed

by authorized personnel wearing protective clothing. Do not

use without the complete lter system in place.

[ NOTE ]

■ In the case of dust harmful to health, contact the local

health and safety authorities, and observe national

regulations in force both during use and disposal.

■ Radioactive substances are not included in the

denition of the type of dust harmful to health described

above.

Dust emissions in the environment

Vacuum cleaners can emit dierent amounts of sucked dust in

the air, depending on the lter they are equipped with. Hereunder

there are some indicative values of the lter performances:

■ Primary lter can retain at least 99.9% of particles.

■ Absolute lter can retain at least 99.995% of particles.

General recommendations

WARNING!

Risk of re outbreaks and explosions.

The vacuum cleaner can only be used when active

sources of ignition are not going to be vacuumed.

It is forbidden to vacuum the following materials: burn-

ing materials (embers, hot ashes, lighted cigarettes,

etc.), liquids, explosive dust or dust liable to spon-

taneous ignition (such as magnesium or aluminium

dusts, etc.).

The vacuum cleaner is not suitable for vacuuming

explosive or similar substances, as established by

the laws governing explosive substances, particularly:

liquid fuels and mixtures of ammable dust and liquids.

WARNING!

If an emergency situation occurs:

■ lter breakage

■ re outbreak

■ short-circuit

■ motor block

■ electric shock

■ etc.

Turn the vacuum cleaner o, unplug it and request

assistance from qualied personnel.

www.blastrac.com ‒ [email protected]

Instruction manual BDC-22-110V

4/16

I

US

Vacuum cleaner description

Vacuum Cleaner Parts and Labels

Figure 1

1. Identication plate which includes:

Model Code, Technical Specications (see table on page

6), Serial N°., Year of manufacture, Input voltage.

2. Longopac

®

bag for collecting vacuumed material.

3. Inlet

4. Inlet plug.

5. Air outlet.

6. Caster locking lever.

7. Handle.

8. Closing band lever.

9. Safety bolt.

10. Warning plate.

Draws the operator’s attention to the fact that the lter

must only be shaken when the vacuum cleaner is turned

OFF (see also par. “Primary lter shaker”).

11. Plug for connecting the vacuum cleaner to an electrical

socket.

12. Silica Dust Warning

Draws the operator’s attention to the fact that exposure of

a crystalline silicon ust can cause cancer or silicosis.

This vacuum cleaner creates a strong air ow which is drawn

in through the inlet (3, Fig. 1) and blown out through the outlet

(5, Fig. 1).

Before turning on the vacuum cleaner, t the vacuum hose into

the inlet and then t the required tool on to the end part (refer

to the manufacturer’s accessory catalogue or Service Center).

The diameters of the authorized hoses are indicated in the

Technical data table.

The vacuum cleaner is equipped with a main lter which

enables it to be used for the majority of applications.

Besides the primary lter, which retains the most common types

of dust, the vacuum cleaner can be tted with a secondary lter

(absolute class H) with a higher ltering capacity for ne dusts

and dusts that are hazardous to health.

Optional Kits

Please contact the manufacturer’s sales network for information

on optional kits.

Instructions for installing the optional kits are included in the

conversion kit.

WARNING!

Use only genuine optional kits supplied and authorized

by the manufacturer.

Optional kits must be installed by qualied Nilsk

personnel.

Accessories

Various accessories are available; refer to the manufacturer’s

accessory catalogue.

WARNING!

Use only genuine accessories supplied and authorized

by the manufacturer.

Packing and unpacking

Dispose of the packing materials in compliance with the laws

in force.

Figure 2

MODEL

A

in

B

in

C

in

lb (*)

BDC122 27.5 31.4 59.0 116.8

(*) Weight with packing

Unpacking, moving, use and storage

Operate on at, horizontal surfaces.

The load-bearing capacity of the surface the vacuum cleaner is

placed on must be suitable for bearing its weight.

www.blastrac.com ‒ [email protected]

Instruction manual BDC-22-110V

5/16

I

US

Setting to work - connection to the power

supply

WARNING!

■ Make sure there is no evident sign of damage to

the vacuum cleaner before starting work.

■ Before plugging the vacuum cleaner into the

electrical mains, make sure the voltage rating

indicated on the data plate corresponds to that of

the electrical mains.

■ Connect the plug into a socket with a correctly

installed ground contact/connection.

■ Make sure that the vacuum cleaner is turned o.

■ The plugs and connectors of the connection cables

must be protected against splashes of water.

■ Make sure that connections to the electrical mains

and plug are correct.

■ Use the vacuum cleaners only when the cables

that connect to the electricity mains are in perfect

condition (damaged cables could lead to electric

shocks!).

■ Regularly check there are no signs of damage,

excessive wear, cracks or aging on the electric

cable.

WARNING!

When the device is operating, do not:

■ Crush, pull, damage or tread on the cable that

connects to the electrical mains.

■ Only disconnect the cable from the electrical

mains by removing the plug (do not pull the cable).

■ Only replace the electric power cable with one of

the same type as the original: 12/3 SJT SP20A. The

same rule applies if an extension is used.

■ The cable must be replaced by the manufacturer’s

Service Center sta or by equivalent qualied

personnel.

Extensions

If an extension cable is used, make sure it is suitable for the

power input and protection degree of the vacuum cleaner.

Maximum length = 20 m

Cable = 12/3 SJT SP20A

WARNING!

Sockets, plugs, connectors and installation of the

extension cable must maintain the IP protection degree

of the vacuum cleaner, as indicated on the data plate.

WARNING!

Never spray water on the vacuum cleaner: this could

be dangerous for persons and could short circuit the

power supply.

WARNING!

The vacuum cleaner’s power socket must be protected

by a dierential circuit-breaker with surge current

limitation, that shuts o the power supply when the

current discharged to the ground exceeds 30 mA for 30

msec. or an equivalent protection circuit.

Dry applications

[ NOTE ]

The supplied lters and the bag (if applicable) must be

installed correctly.

WARNING!

Comply with the safety regulations governing the

vacuumed materials.

Maintenance and repairs

WARNING!

Disconnect the vacuum cleaner from its power source

before cleaning, servicing, replacing parts or convert-

ing it to another version/variant, the plug must be

disconnected from the socket.

■ Carry out only the maintenance operations

described in this manual.

■ Use only original spare parts.

■ Do not modify the vacuum cleaner in any way.

Failure to comply with these instructions could jeop-

ardize your safety. Moreover, such action would im-

mediately make the warranty issued with the vacuum

cleaner void.

WARNING!

For maintenance procedures not described in this

manual, please contact the manufacturer’s technical

support or sales network.

www.blastrac.com ‒ [email protected]

Instruction manual BDC-22-110V

6/16

I

US

Technical data

Parameter Units BDC122

Voltage (60 Hz) V 120

Power rating kW 2

Current Draw, rated Amps 14.5

Max vacuum in. H2O 83,1

Maximum air ow rate (with hose, length: 3 m,

diameter: 50 mm)

cfm 180

Noise level (Lpf) dB(A) 74

Protection Class I

Insulation Class F

Longopac

®

dust bag capacity gal.

6.6

Machine Inlet Inches 2

Allowed hoses Inches 2

Primary lter surface Sq. ft 17

Upstream absolute “H” lter surface Sq. ft 17

Absolute lter eciency % 99.995 (H14)

Weight

(1)

lb 117

Dimensions

Figure 3

Model BDC122

A (in) 25,98

B (in) 23,26

C (in) 50,19

(1) Net weight Storage conditions:

T: -10°C ÷ +40°C

Humidity: 85%

Operating conditions:

Maximum altitude: 800 m

(Up to 2,000 m with reduced performances)

T: -10°C ÷ +40°C

Humidity: 85%

www.blastrac.com ‒ [email protected]

Instruction manual BDC-22-110V

7/16

I

US

Controls and indicators

Figure 4

1. Main motor Start/Stop switch

You can start/stop the main motor with this switch.

2. Second motor Start/Stop switch

You can start/stop the second motor with this switch.

3. Vacuum gauge

4. Manual lter shaker lever

Inspections before starting

Figure 5

1. Inlet

Before starting, check that:

■ The lters are installed;

■ The closing band is properly tightened;

■ The vacuum hose and tools have been correctly tted into

the inlet (1);

■ The Longopac

®

bag (2, Fig. 1) is installed.

WARNING!

Lock the caster brakes before starting the vacuum

cleaner (2).

WARNING!

Do not use the device if the lters are faulty.

Starting and stopping the vacuum cleaner

Figure 4

■ Toggle the switch (1) to the “ON” position to start the rst

motor.

■ Toggle the switch (2) to the “ON” position to start the

second motor.

■ Toggle the switch (1) to the “OFF” position to stop the rst

motor.

■ Toggle the switch (2) to the “OFF” position to stop the

second motor.

Operation

Figure 7

Vacuum gauge (2): green zone (3), red zone (1)

When using the vacuum cleaner, check the ow control:

■ when the vacuum cleaner is operating, the pointer of

the vacuum gauge must remain in the green zone (3)

to ensure that the speed of the intake air does not drop

below the safety value of 20 m/sec;

■ If the pointer is in the red zone (1) it means that the speed

of the air in the vacuum hose is less than 20 m/s, and that

the vacuum cleaner is not operating in optimal conditions.

Shake or replace the lter.

■ during normal operation conditions, close the vacuum

hose, the pointer of the vacuum gauge must switch from

the green zone (3) to the red zone (1).

WARNING!

When the vacuum cleaner is operating, always check

that the vacuum gauge pointer remains in the green

zone (3).

Consult the “Troubleshooting” chapter if faults occur.

WARNING!

The air speed in the suction tube must not be less than

20 m/s.

Condition indicated by the vacuum gauge pointer in the

green zone (3).

WARNING!

All vacuum cleaners can be used only with hoses

whose diameters comply with the specications in the

“Technical Data” table.

WARNING!

Consult the “Troubleshooting” chapter if faults occur.

www.blastrac.com ‒ [email protected]

Instruction manual BDC-22-110V

8/16

I

US

Primary lter shaker

Figure 7

According to the quantity of vacuumed material, if the vacuum

gauge pointer (2) goes from the green zone (3) to the red zone

(1), shake the primary lter by turning the lever (4, Fig. 3)

clockwise/counterclockwise for at least 5 complete cycles.

WARNING!

Stop the vacuum cleaner before using the lter shaker.

Do not shake the lter while the vacuum cleaner is on,

as this could damage the lter.

Wait before restarting the vacuum cleaner, to allow the dust to

settle. Replace the lter element if the vacuum gauge pointer

stays in the red zone (1) even after the lter has been shaken

(see “Primary lter replacement”).

Emergency stopping

Turn the buttons (1 and 2 Fig. 4) to “OFF”. The vacuum cleaner

stops.

WARNING!

The motors and internal components of the vacuum

cleaner will still be electrically powered.

To start the vacuum cleaner again, turn the buttons of each

single motor (1 and 2, Fig. 4) to “ON”.

Replacement of dust bags

WARNING!

Before proceeding with these operations, turn o the

vacuum cleaner and remove the plug from the power

socket.

WARNING!

■ These operations can only be carried out by trained

and qualied personnel who must wear adequate

clothing, in compliance with the laws in force.

■ Take care not to raise dust when this operation is

carried out. Wear an N100 (P3) protective mask.

■ In case of hazardous and/or harmful dust, use only

the bags recommended by the manufacturer (see

“Recommended spare parts”).

■ The bag must only be disposed of by qualied

personnel and in compliance with the laws in force.

WARNING!

Installing a paper bag not suitable for the class of dust

to be vacuumed, or incorrect installation, can create a

health risk for people exposed.

How to replace Longopac

®

bags

Figure 6

■ Turn the bag full of dust (1) on itself to create a tightly

twisted section of bag to be tightened with two zip ties (2).

■ Place the two clamps at a distance of 50 mm between

them, then with a pair of scissors cut between the two ties.

■ Remove the bag full of dust (1) and place the new section

of Longopac

®

(3).

Maintenance, cleaning and decontamination

WARNING!

To guarantee the safety level of the vacuum cleaner,

only original spare parts supplied by the manufacturer

should be used.

WARNING!

The precautions described below must be taken during

all maintenance operations, including cleaning and

replacing the primary and absolute lters.

WARNING!

The maintenance, cleaning and decontamination

operations must only be performed with the vacuum

cleaner turned o and the plug disconnected from

the power socket.

It is absolutely forbidden to perform maintenance

with the plug connected to the socket.

Danger of electric shock!

■ If the user is performing the maintenance operations,

the vacuum cleaner must be disassembled, cleaned

and overhauled as far as reasonably possible without

hazards for the maintenance personnel or other people.

The suitable precautions include decontamination before

disassembling the vacuum cleaner, adequate ltered

ventilation of the exhaust air from the room in which it

is disassembled, cleaning the maintenance area and

suitable personal protection.

■ The external parts of the vacuum cleaner must be

decontaminated by cleaning and vacuuming methods,

dedusted or treated with sealant before being taken out

of a hazardous zone.

■ All parts of the vacuum cleaner must be considered as

contaminated when they are removed from the hazardous

zone and appropriate actions must be taken to prevent

dust from dispersing.

■ When maintenance or repair procedure are carried out,

all the contaminated elements that cannot be properly

cleaned, must be eliminated.

■ These elements must be disposed of in sealed bags in

accordance with applicable regulations and local laws on

the disposal of such material.

■ This procedure must also be followed when the lters are

eliminated (primary and absolute lters).

www.blastrac.com ‒ [email protected]

Instruction manual BDC-22-110V

9/16

I

US

■ Compartments that are not dust-tight must be opened

with suitable tools (screwdrivers, wrenches, etc.) and

thoroughly cleaned.

■ A check must be carried out by the manufacturer or

qualied personnel at least once a year. For example:

Check the air lters to nd out whether the air-tightness

of the vacuum cleaner has been impaired in any way

and make sure that the electric control panel operates

correctly.

Main and absolute lter disassembly and

replacement

WARNING!

When the vacuum cleaner is used to vacuum hazardous

substances, the lters become contaminated, therefore:

■ Work with care and avoid spilling the vacuumed

dust and/or material;

■ place the disassembled and/or replaced lter in a

sealed plastic bag;

■ close the bag hermetically;

■ dispose of the lter in accordance with the laws

in force.

WARNING!

Filter replacement is a serious matter. The lter must

be replaced with one of identical characteristics, lter-

ing surface and category.

Otherwise the vacuum cleaner will not operate cor-

rectly.

Before proceeding with these operations, turn the

vacuum cleaner o and disconnect the plug from the

power socket.

How to replace the primary lter

Figure 8

Before proceeding with these operations, turn o the vacuum

cleaner and remove the plug from the power socket.

■ Turn o the vacuum cleaner by placing the two switches

in the “OFF” position.

■ Shake the primary lter by turning the lever (5) clockwise/

counterclockwise for at least 5 complete cycles.

■ Release the closing band (7).

■ Remove the head (8) and the cage. but do not lift the star

lter (9).

■ Remove and dispose of the lter according to the laws in

force.

■ Reset the vacuum cleaner by fastening the new lter on

the ring (10) with the metal clamp (11).

■ Install the head and the cage in the primary lter by taking

care that there is one spoke of the cage every two pockets

of the star lter.

■ Check the correct position of the shaker handle (12).

■ Fasten the closing band.

WARNING!

Take care not to raise dust when this operation

is carried out. Wear an N100 (P3) mask and other

protective clothing plus protective gloves (PPE/DPI)

suited to the hazardous nature of the dust collected;

refer to the laws in force.

WARNING!

Reassemble with care to avoid trapping your hands

between the vacuum unit and the container. Use

gloves that provide ANSI/ISEA Level “2” protection.

If necessary contact the manufacturer’s Service Center.

How to safely replace the absolute lter

Figure 9

Before proceeding with these operations, turn the machine o

and disconnect the plug from the power socket.

■ Disconnect the accessory hose from the inlet (1).

■ Insert the plug (2) in the inlet.

■ Remove the cover (3) from the lter shaker lever and

unscrew the nut (4).

■ Remove the lter shaker lever (5) from the cage stem.

DO NOT APPLY FORCE ON THE HEAD COVER

■ Unlock the safety bolt (6).

■ Release the closing band (7).

■ Remove the head (8) from the cage stem (9), but do not

lift the star lter (10).

■ Tilt the head (8) and lay it on a suitable surface, in order

to not ruin the plastic.

■ Unscrew ring (11).

■ Remove the disc (12), the iron-rubber washer (13) and the

absolute lter (14).

■ Place absolute lter (14) in a plastic bag, close the bag

hermetically and dispose of the lter in accordance with

the laws in force.

■ Insert a new absolute lter (14) with the same ltering

characteristics as the removed one.

■ Install the iron-rubber washer (13) and the disc (12), then

tighten the ring nut (11).

■ Reinstall the head (8) by inserting it on the cage stem (9).

■ Reinstall the lter shaker lever (5) by inserting it into the

cage stem (9) and turning it as shown in the gure (26).

■ Lock the lever with the nut (4), then reinstall the cover (3).

■ Fasten the closing band (7).

■ Tighten the safety bolt (6) again.

WARNING!

Take care not to raise dust when this operation

is carried out. Wear an N100 (P3) mask and other

protective clothing plus protective gloves (PPE/DPI)

suited to the hazardous nature of the dust collected;

refer to the laws in force.

www.blastrac.com ‒ [email protected]

Instruction manual BDC-22-110V

10/16

I

US

WARNING!

Reassemble with care to avoid trapping your hands

between the vacuum unit and the container. Use

gloves that provide ANSI/ISEA Level “2” protection.

If necessary contact the manufacturer’s Service Center.

Longopac

®

replacement

Figure 10

■ Prepare the bag holder with the inside part upwards and

insert the Longopac inside the groove on it. Pull o the

Longopac inner end for at least 250 mm, put the strap

around the support as shown in the gure, tighten it by

leaving free the excess part of the inner end pulled o

previously. Properly arrange the excess Longopac inside

the groove (1).

■ Pull o the Longopac outer end, turn it down and close it

with the proper band (2-3).

■ Draw near the bag holder to be placed under the hopper

cone, insert the pins into the slots and turn the system to

lock it at the upper cylinder (4).

■ Pull down the bag closed by the band and lay it on the tray.

Then, by means of the 2

nd

supplied belt, fasten the inner

end (250 mm-long), which have been previously removed,

above the gasket on the hopper (5).

WARNING!

Take care not to raise dust when this operation

is carried out. Wear an N100 (P3) mask and other

protective clothing plus protective gloves (PPE/DPI)

suited to the hazardous nature of the dust collected;

refer to the laws in force.

WARNING!

Reassemble with care to avoid trapping your hands

between the vacuum unit and the container. Use

gloves that provide ANSI/ISEA Level “2” protection.

If necessary contact the manufacturer’s Service Center.

At the end of a cleaning session

■ Turn o the vacuum cleaner and remove the plug from

the socket.

■ Wind the connection cable.

■ Clean the vacuum cleaner as described in the

“Maintenance, cleaning and decontamination” paragraph.

■ Store the device in a dry place, out of reach of unauthorized

people.

■ Lock the caster brakes (6, Fig. 1).

■ Shut the inlet with the appropriate plug (4, Fig. 1) when the

vacuum cleaner is transported or not being used.

Tightness inspection

Hoses check

Make sure the connecting hoses (Fig. 11) are in a good

condition and correctly xed.

If the hoses are damaged, broken or badly connected to the

unions, they must be replaced.

When sticky materials are collected, check for possible clogging

along the hose, in the inlet and on the bae plate inside the

ltering chamber.

To clean, scrape the inlet (2, Fig. 11) from the outside to remove

deposits.

Hopper gasket check

Ensure that the Longopac

®

bag is tight with the gasket (2,

Fig. 12). The gasket must be replaced if it is torn, cut, etc...

Clapet gasket check

Replace the gasket (1, Fig. 12) if it is not tight, or if it is torn,

cut, etc.

Wiring diagrams

Figure 13

Item Type Description Qty

Q1 4083901814 Switch 2 pole 1

Q2 4083901814 Switch 2 pole 1

www.blastrac.com ‒ [email protected]

Instruction manual BDC-22-110V

11/16

I

US

Procedure for Longopac

®

system installation

2. Insert the Longopac

®

bag and cut the connections

3. Prepare the bag on the stand, pull out the end and start

1. Remove the holder

www.blastrac.com ‒ [email protected]

Instruction manual BDC-22-110V

12/16

I

US

4. Place the holder on the vacuum cleaner

5. “Duck-neck” closure of the bag with adhesive tape

www.blastrac.com ‒ [email protected]

Instruction manual BDC-22-110V

13/16

I

US

Procedure for hose removal

2. Place the vacuum plug1. Remove the hose,

including its coupling,

from the vacuum

cleaner

3. Roll the hose 4. Thread the two ends

into each other

5. Use a belt or tape to

transport and store

away from dust

www.blastrac.com ‒ [email protected]

Instruction manual BDC-22-110V

14/16

I

US

Recommended spare parts

The following is a list of spare parts that should be kept ready at hand in order to speed up maintenance operations.

Refer to the manufacturer’s spare parts catalogue when ordering spare parts.

Description Model

Standard lter 4081701390

Filter ring gasket Z8 17025

Hopper gasket Longopac® 4089100872

Filter clamp 4084001291

Absolute lter 4081701384

Longopac

®

4084000956

120V 1000W Motor 4085400026

Brushes (carbon) for 120V motors (2 brushes) 40000886

www.blastrac.com ‒ [email protected]

Instruction manual BDC-22-110V

15/16

I

US

Troubleshooting

Problem Cause Remedy

The vacuum cleaner does not start Lack of power supply

Check for power at the socket.

Check the condition of the socket and the cable.

Ask for assistance to be performed by a qualied

manufacturer’s technician.

The vacuum cleaner revolutions

increase

Clogged primary lter

Use the lter shaker (models with manual lter

shaker). Replace it if this is not sucient.

Clogged vacuum hose Check the vacuum hose and clean it.

Dust leaks from the vacuum cleaner

The lter is torn Replace it with another of identical type.

Inadequate lter

Replace it with another of a suitable category and

check.

Noisy motors Motor brushes (carbon) worn or broken Remove and replace the (carbon) motor brushes.

Electrostatic current on the vacuum

cleaner

Missing or inecient grounding

Check all ground connections. In particular on the

vacuum inlet tting; replace the hose with an antistatic

hose.

www.blastrac.com ‒ [email protected]

Instruction manual BDC-22-110V

16/16

I

US

www.blastrac.com ‒ [email protected]

Manuel d’instructions BDC-22-110V

1/16

I

F

Table des matières

Mode d’emploi .................................................................................................................2

Sécurité de l’opérateur .................................................................................................................... 2

Informations générales sur l’utilisation de l’aspirateur ..................................................................... 2

Utilisations prévues ......................................................................................................................... 2

Utilisations inappropriées ................................................................................................................ 3

Versions et variantes de fabrication ................................................................................................ 3

Émissions de poussières dans l’atmosphère .................................................................................. 3

Recommandations générales .......................................................................................................... 3

Description de l’aspirateur .............................................................................................4

Composants de l’aspirateur et étiquettes ........................................................................................ 4

Options de transformation ............................................................................................................... 4

Accessoires ..................................................................................................................................... 4

Emballage et déballage ................................................................................................................... 4

Déballage, manutention, emploi et stockage .................................................................................. 4

Mise en service - raccordement au réseau électrique ..................................................................... 5

Rallonges ........................................................................................................................................ 5

Aspiration de substances sèches .................................................................................................... 5

Entretien et réparation ..................................................................................................................... 5

Caractéristiques techniques ............................................................................................................ 6

Dimensions ...................................................................................................................................... 6

Commandes et indicateurs .............................................................................................................. 7

Contrôles avant la mise en marche ................................................................................................. 7

Mise en marche et arrêt de l’aspirateur ........................................................................................... 7

Fonctionnement ............................................................................................................................... 7

Secoueur primaire ........................................................................................................................... 8

Arrêt d’urgence ................................................................................................................................ 8

Mode de remplacement des sacs à poussière ................................................................................ 8

Entretien, nettoyage et décontamination ......................................................................................... 8

Démontage et remplacement des ltres primaire et absolu ............................................................ 9

Remplacement du Longopac

® ..................................................................................................................................................................................... 10

À la n du nettoyage ...................................................................................................................... 10

Contrôle des étanchéités ............................................................................................................... 10

Schémas électriques ..................................................................................................................... 10

Procédure pour l’installation du système Longopac

®.......................................................................................................................... 11

Procédure de retrait du tuyau ........................................................................................................ 13

Pièces détachées conseillées ......................................................................................14

Dépannage .....................................................................................................................15

Traduction des instructions originales

www.blastrac.com ‒ [email protected]

Manuel d’instructions BDC-22-110V

2/16

I

F

Mode d’emploi

CONSERVER CES INSTRUCTIONS

- Ne pas utiliser pour aspirer de liquides inammables ou

combustibles (par exemple, l’essence) et ne pas utiliser

dans des endroits où ils pourraient être présents.

- Ne pas aspirer de matières ardentes (cigarettes, braises,

cendres chaudes).

- Ne pas utiliser sans le sac à collecte de poussière ou

le ltre.

- Brancher exclusivement à une prise électrique de terre

adaptée. Lire les instructions de mise à la terre.

- Débrancher avant de brancher tout accessoire mécanique.

Informations générales sur l’utilisation de

l’aspirateur

L’utilisation de l’aspirateur est soumise aux normes

internationales en vigueur.

En plus des instructions du mode d’emploi et des règlements

en vigueur dans le Pays où il est utilisé, pour la prévention des

accidents il est nécessaire d’observer les règles techniques

pour un travail sûr et correct.

Éviter tout travail pouvant porter atteinte à la sécurité des

personnes, des choses et de l’environnement.

Observer les informations et les prescriptions de sécurité

contenues dans ce manuel d’instructions.

Utilisations prévues

Cet appareil convient pour l’emploi commercial, par exemple

dans des hôtels, des écoles, des hôpitaux, des usines, des

magasins, des bureaux, des résidences, pour l’emploi en

location et de toute manière pour des emplois diérents du

simple usage domestique.

Cet aspirateur convient pour les travaux de nettoyage et de

collecte de matières solides en lieux couverts et à ciel ouvert.

■ Prévoir toujours un espace libre autour de l’aspirateur

pour permettre un accès aisé aux commandes.

La machine a été conçue pour être utilisée par un seul

opérateur.

Cet appareil est formé d’une unité d’aspiration motorisée,

précédée d’une unité ltrante et munie d’une cuve pour la

collecte de la matière aspirée.

LIRE TOUTES LES INSTRUCTIONS AVANT D’UTILISER LA MACHINE.

Observer les avertissements importants de sécurité repérés par AVERTISSEMENT!

Sécurité de l’opérateur

AVERTISSEMENT !

Avant de mettre l’aspirateur en service, lire

absolument les instructions d’utilisation et

les garder à portée de main pour pouvoir les

consulter en cas de besoin.

L’utilisation de l’aspirateur est réservée exclusivement

au personnel expérimenté, formé et expressément

chargé du fonctionnement.

Avant l’utilisation, les opérateurs doivent être

instruits et formés à l’utilisation de l’aspirateur et

des substances pour lesquelles il doit être utilisé, y

compris la méthode sûre d’évacuation et d’élimination

de la matière recueillie.

INSTRUCTIONS IMPORTANTES DE SECURITE

Pour réduire le risque d’incendie, chocs électriques ou

blessures :

- Ne pas laisser la machine sans surveillance lorsqu’elle

est branchée. La débrancher lorsqu’elle n’est pas utilisée

et avant toute opération d’entretien.

- Pour réduire le risque de chocs électriques, l’utiliser unique-

ment à l’intérieur.

- Pour réduire le risque de chocs électriques, l’utiliser unique-

ment le cuve à liquides avant toute opération de ramassage

humide.

- Ne pas permettre que la machine soit utilisée comme jouet.

La machine doit être utilisée exclusivement par les adultes.

Faire très attention lors d’une utilisation par et près d’enfants.

- Utiliser la machine selon les indications décrites dans le présent

manuel. Utiliser exclusivement les accessoires recommandés

par le fabricant.

- Ne pas utiliser avec des câbles ou des ches endommagés.

Si la machine ne fonctionne pas correctement, si elle est

endommagée, laissée à l’extérieur ou tombée dans l’eau, la

porter auprès d’un Service après-vente agréé.

- Ne pas la tirer par le câble, ne pas utiliser le câble comme

poignée, ne pas fermer de porte sur le câble et ne pas tirer le

câble sur des surfaces ou coins tranchants. Ne pas démarrer la

machine sur le câble. Tenir le câble loin des surfaces chaudes.

- Ne pas tirer le câble pour débrancher la machine. Pour

débrancher la machine, saisir la che et non le câble.

- Ne pas toucher la che, le câble ou la machine avec les

mains mouillées.

- Ne pas insérer d’objets dans les ouvertures. Ne pas utiliser

si les ouvertures sont colmatées ; les garder libres de pous-

sière, lasse, poils et tout autre corps étranger à même de

réduire le ux d’air.

- Éviter que les poils, les vêtements amples, les doigts et les

parties du corps soient entraînés dans les parties mobiles

de la machine.

- Désactiver toutes les commandes avant de débrancher la

machine de la prise de courant.

- Prêter particulièrement attention pendant le nettoyage des

escaliers.

La page charge ...

Blastrac BDC-22-110V Le manuel du propriétaire

Ce manuel convient également à

Blastrac BDC-22-110V Le manuel du propriétaire

dans d''autres langues

Documents connexes

Autres documents