Simplicity 2690889 Manuel utilisateur

Catégorie
Tondeuses à gazon
Taper
Manuel utilisateur

Ce manuel convient également à

1739923
Revision -
NXT
TM
Riding Mowers
Model No. Description
2690889 NXT 2346 Riding Mower, 23 Gross HP, 46" (116,8 cm)
2690890 NXT 2752 Riding Mower, 27 Gross HP, 52" (132,1 cm)
Operator's Manual
Not for
Reproduction
Thank you for purchasing this quality-built SNAPPER mower. We're pleased that you've placed your confidence in the
SNAPPER brand. When operated and maintained according to the instructions in this manual, your SNAPPER product will
provide many years of dependable service.
This manual contains safety information to make you aware of the hazards and risks associated with mowers and how
to avoid them. This product and its approved attachments/accessories are designed and intended only for lawn work or
snow removal and are not intended for any other purpose. It is important that you read and understand these instructions
thoroughly before attempting to start or operate this equipment. Save these original instructions for future reference.
Where to Find Us
You never have to look far to find support and service for your SNAPPER mower. There are authorized service dealers worldwide
who provide quality service. You can contact Customer Service by phone at (800) 317-7833, or locate a dealer on the Internet at
www.snapper.com.
Mower
Model Number _____________________________________
Serial Number _____________________________________
Engine
Model Type Trim _____________________________________
Date Code _____________________________________
Date Purchased
_____________________________________
The Illustrated Parts List for this machine can be downloaded from www.snapper.com. Please provide model and serial number when
ordering replacement parts.
Copyright © 2010 All rights reserved. No part of this material may be reproduced
or transmitted in any form without the express written permission of
Briggs & Stratton Power Products Group, LLC.
SNAPPER is a trademark of Briggs & Stratton Power Products Group, LLC
2 www.snapper.com
Not for
Reproduction
3
Table of Contents
Operator Safety ............................................ 4
Important Safety Instructions ........................................ 4
Safety Symbols and Meanings ...................................... 4
Safe Operation Practices ........................................... 5
Safety Decals .................................................... 10
Features and Controls ...................................... 12
Tractor Controls .................................................. 13
Electronic Dashboard .............................................. 14
Operation ................................................. 16
General Operating Safety .......................................... 16
Safety Interlock System Tests ....................................... 16
Check Tire Pressure .............................................. 16
Oil Recommendations ............................................. 16
Check and Add Engine Oil ......................................... 17
Oil Pressure ..................................................... 17
Fuel Recommendations ............................................ 17
Adding Fuel ...................................................... 18
Starting the Engine ................................................ 18
Driving the Tractor ................................................ 19
Mowing ......................................................... 19
Reverse Mowing Option (RMO
TM
) ................................... 19
Pushing the Tractor by Hand ........................................ 19
Adjusting the Mower Cutting Height .................................. 20
Parking Brake .................................................... 20
Cruise Control .................................................... 20
Stopping the Tractor and Engine .................................... 20
Maintenance ............................................... 21
Maintenance Chart ................................................ 21
Check Tire Pressure .............................................. 21
Check Mower Blade Stopping Time .................................. 21
Battery Maintenance .............................................. 22
Disconnect the Battery ............................................. 22
Remove and Install the Battery ...................................... 22
Connect the Battery ............................................... 22
Cleaning the Battery and Cables .................................... 22
Charging the Battery .............................................. 22
Changing the Engine Oil ........................................... 23
Servicing the Air Filter ............................................. 24
Servicing the Muffler .............................................. 24
Servicing the Spark Plugs .......................................... 24
Washing the Mower Deck .......................................... 25
Adjusting the Gauge Wheels ........................................ 26
Lubrication ...................................................... 27
Storage ......................................................... 28
Troubleshooting ............................................ 29
Specifications .............................................. 31
Warranties ................................................. 32
en
English
Not for
Reproduction
WARNING
Certain components in this product and its related
accessories contain chemicals known to the State
of California to cause cancer, birth defects, or other
reproductive harm. Wash hands after handling.
WARNING
Battery posts, terminals, and related accessories
contain lead and lead compounds - chemicals known to the
State of California to cause cancer, birth defects, or other
reproductive harm. Wash hands after handling.
WARNING
The engine exhaust from this product contains
chemicals known to the State of California to cause cancer,
birth defects, or other reproductive harm.
Important Safety Instructions
SAVE THESE INSTRUCTIONS - This manual contains
important instructions that should be followed during the
initial set-up, the operation, and the maintenance of the
equipment. Save these original instructions for future
reference.
The safety alert symbol is used to identify safety
information about hazards that can result in personal injury.
A signal word (DANGER, WARNING, or CAUTION) is used
with the alert symbol to indicate the likelihood and the
potential severity of injury. In addition, a hazard symbol may
be used to represent the type of hazard.
DANGER indicates a hazard which, if not avoided,
will result in death or serious injury.
WARNING indicates a hazard which, if not avoided,
could result in death or serious injury.
CAUTION indicates a hazard which, if not avoided,
could result in minor or moderate injury.
NOTICE indicates a situation that could result in damage
to the product.
FIRE
MOVING PARTS SHOCK
STOP
TOXIC FUMES
KICKBACK EXPLOSION
ON OFF
CHOKE
FUEL
HOT SURFACE
HAZARDOUS
CHEMICAL
WEAR EYE
PROTECTION
READ MANUAL FAST
SLOW
OIL
Safety Symbols and Meanings
WARNING
Running engine gives off carbon monoxide, an
odorless, colorless, poison gas.
Breathing carbon monoxide can cause headache,
fatigue, dizziness, vomiting, confusion, seizures,
nausea, fainting or death.
• Operate equipment ONLY outdoors.
• Keep exhaust gas from entering a confined area through
windows, doors, ventilation intakes, or other openings.
Operator Safety
ROLL-OVER
HAZARD
AMPUTATION
HAZARD
4 www.snapper.com
FUEL
SHUT-OFF
Not for
Reproduction
Operating Safety
Power equipment is only as safe as the operator. If it is
misused, or not properly maintained, it can be dangerous!
Remember, you are responsible for your safety and that of those
around you. Use common sense, and think through what you are
doing. If you are not sure that the task you are about to perform
can be safely done with the equipment you have chosen, ask a
professional: contact your local authorized dealer.
Read the Manual
The operator’s manual contains important safety information you
need to be aware of BEFORE you operate your unit as well as
DURING operation.
Safe operating techniques, an explanation of the product’s features
and controls, and maintenance information is included to help you
get the most out of your equipment investment.
Be sure to completely read the Safety Rules and Information found
on the following pages. Also completely read the Operation section.
Children
Tragic accidents can occur with children. Do not allow them
anywhere near the area of operation. Children are often
attracted to the unit and mowing activity. Never assume that
children will remain where you last saw them. If there is a
risk that children may enter the area where you are mowing,
have another responsible adult watch them.
DO NOT GIVE CHILDREN RIDES ON THIS UNIT! This
encourages them to come near the unit in the future while it
is running, and they could be seriously hurt. They may then
approach the unit for a ride when you are not expecting it,
and you may run over them.
Reverse
Do not mow in reverse unless
absolutely necessary.
Always look down
and behind before
and while traveling
in reverse even with
the mower blades
disengaged.
Safe Operation Practices
5
en
Not for
Reproduction
3.5 ft
(1,5 m)
20.0 ft (6,0 m)
Slope Operation
You could be seriously injured or even killed if you use this unit on too
steep an incline. Using the unit on a slope that is too steep or where you
don’t have adequate traction can cause you to lose control or roll over.
A good rule of thumb is to not operate on any slope you cannot back up
(in 2-wheel drive mode). You should not operate on inclines with a slope
greater than a 3.5 foot rise over a 20 foot length. Always drive up and
down slopes: never cross the face.
Also note that the surface you are driving on can greatly impact stability
and control. Wet grass or icy pavement can seriously affect your ability
to control the unit.
If you feel unsure about operating the unit on an incline, don’t do it. It’s
not worth the risk.
Moving Parts
This equipment has many moving parts that can injure you or someone else.
However, if you are seated in the seat properly and follow all the rules in this book,
the unit is safe to operate.
The mower deck has spinning mower blades that can amputate hands and feet.
Do not allow anyone near the equipment while it is running!
To help you, the operator, use this equipment safely, it is equipped with an
operator-present safety system. Do NOT attempt to alter or bypass the system.
See your dealer immediately if the system does not pass all the safety interlock
system tests found in this manual.
Thrown Objects
This unit has spinning mower blades. These blades can pick up and throw
debris that could seriously injure a bystander. Be sure to clean up the area to
be mowed BEFORE you start mowing.
Do not operate this unit without the entire grass catcher or discharge guard
(deflector) in place.
Do not allow anyone in the mowing area while the unit is running! If someone
does enter the area, shut the unit off immediately until they leave.
Fuel and Maintenance
Gasoline is extremely flammable. Its vapors are also extremely flammable
and can travel to distant ignition sources. Gasoline must only be used as
a fuel, not as a solvent or cleaner. Fuel should never be stored any place
where its vapors can build up or travel to an ignition source like a pilot light.
Fuel belongs in an approved, plastic, sealed gas can, or in the tractor fuel
tank with the cap securely closed. Spilled fuel needs to be cleaned up
immediately.
Proper maintenance is critical to the safety and performance of your unit.
Be sure to perform the maintenance procedures listed in this manual and be
sure to periodically test the safety system.
6 www.snapper.com
Not for
Reproduction
GENERAL OPERATION
1. Read, understand, and follow all instructions in the
manual and on the unit before starting.
2. Do not put hands or feet near rotating parts or under
the machine. Keep clear of the discharge opening at all
times.
3. Only allow responsible adults, who are familiar with the
instructions, to operate the unit (local regulations can
restrict operator age).
4. Clear the area of objects such as rocks, toys, wire, etc.,
which could be picked up and thrown by the blade(s).
5. Be sure the area is clear of other people before mowing.
Stop the unit if anyone enters the area.
6. Never carry passengers.
7. Do not mow in reverse unless absolutely necessary.
Always look down and behind before and while travelling
in reverse.
8. Never direct discharge material toward anyone. Avoid
discharging material against a wall or obstruction.
Material may ricochet back toward the operator. Stop the
blade(s) when crossing gravel surfaces.
9. Do not operate the machine without the entire grass
catcher, discharge guard (deflector), or other safety
devices in place.
10. Slow down before turning.
11. Never leave a running unit unattended. Always
disengage the PTO, set parking brake, stop engine, and
remove starter insert before dismounting.
12. Disengage blades (PTO) when not mowing. Shut off
engine and wait for all parts to come to a complete
stop before cleaning the machine, removing the grass
catcher, or unclogging the discharge guard.
13. Operate the machine only in daylight or good artificial
light.
14. Do not operate the unit while under the influence of
alcohol or drugs.
15 Watch for traffic when operating near or crossing
roadways.
16. Use extra care when loading or unloading the unit into a
trailer or truck.
17. Always wear eye protection when operating this unit.
18. Data indicates that operators, age 60 years and above,
are involved in a large percentage of power equipment-
related injuries. These operators should evaluate their
ability to operate the equipment safely enough to protect
themselves and others from injury.
19. Follow the manufacturer’s recommendations for wheel
weights or counterweights.
20. Keep in mind the operator is responsible for accidents
occurring to other people or property.
21. All drivers should seek and obtain professional and
practical instruction.
22. Always wear substantial footwear and trousers. Never
operate when barefoot or wearing sandals.
23. Before using, always visually check that the blades and
blade hardware are present, intact, and secure. Replace
worn or damaged parts.
24. Disengage attachments before: refueling, removing an
attachment, making adjustments (unless the adjustment
can be made from the operator’s position).
25. When the machine is parked, stored, or left unattended,
lower the cutting means unless a positive mechanical
lock is used.
26. Before leaving the operator’s position for any reason,
engage the parking brake (if equipped), disengage the
PTO, stop the engine, and remove the starter insert.
27. To reduce fire hazard, keep the unit free of grass,
leaves, & excess oil. Do not stop or park over dry leaves,
grass, or combustible materials.
TRANSPORTING AND STORAGE
1. When transporting the unit on an open trailer, make sure
it is facing forward, in the direction of travel. If the unit is
facing backwards, wind lift could damage the unit.
2. Always observe safe refueling and fuel handling
practices when refueling the unit after transportation or
storage.
3. Never store the unit (with fuel) in an enclosed poorly
ventilated structure. Fuel vapors can travel to an ignition
source (such as a furnace, water heater, etc.) and cause
an explosion. Fuel vapor is also toxic to humans and
animals.
4. Always follow the engine manual instructions for storage
preparations before storing the unit for both short and
long term periods.
5. Always follow the engine manual instructions for proper
start-up procedures when returning the unit to service.
6. Never store the unit or fuel container inside where there
is an open flame or pilot light, such as in a water heater.
Allow unit to cool before storing.
7
Read these safety rules and follow them closely. Failure to obey these rules could result in loss of control of unit,
severe personal injury or death to you, or bystanders, or damage to property or equipment. This mowing deck
is capable of amputating hands and feet and throwing objects. The triangle
in text signifies important
cautions or warnings which must be followed.
en
Not for
Reproduction
CHILDREN
Tragic accidents can occur if the operator is not alert to the
presence of children. Children are often attracted to the unit
and the mowing activity. Never assume that children will
remain where you last saw them.
1. Keep children out of the mowing area and under the
watchful care of another responsible adult.
2. Be alert and turn unit off if children enter the area.
3. Before and during reverse operation, look behind and
down for small children.
4. Never carry children, even with the blade(s) off. They
may fall off and be seriously injured or interfere with
safe unit operation. Children who have been given rides
in the past may suddenly appear in the mowing area
for another ride and be run over or backed over by the
machine.
5. Never allow children to operate the unit.
6. Use extra care when approaching blind corners, shrubs,
trees, or other objects that may obscure vision.
EMISSIONS
1. Engine exhaust from this product contains chemicals
known, in certain quantities, to cause cancer, birth
defects, or other reproductive harm.
2. Look for the relevant Emissions Durability Period and Air
Index information on the engine emissions label.
IGNITION SYSTEM
1. This spark ignition system complies with Canadian
ICES-002.
SLOPE OPERATION
Slopes are a major factor related to loss-of-control and tip-
over accidents, which can result in severe injury or death.
Operation on all slopes requires extra caution. If you cannot
back up the slope or if you feel uneasy on it, do not operate
on it.
Control of a walk-behind or ride-on machine sliding on a
slope will not be regained by the application of the brake.
The main reasons for loss of control are: insufficient tire grip
on the ground, speed too fast, inadequate braking, the type
of machine is unsuitable for its task, lack of awareness of the
ground conditions, incorrect hitching and load distribution.
1. Mow up and down slopes, not across.
2. Watch for holes, ruts, or bumps. Uneven terrain could
overturn the unit. Tall grass can hide obstacles.
3. Choose a slow speed so that you will not have to stop
or change speeds while on the slope.
4. Do not mow on wet grass. Tires may loose traction.
5. Always keep unit in gear especially when traveling
down slopes. Do not shift to neutral and coast
downhill.
6. Avoid starting, stopping, or turning on a slope. If tires
lose traction, disengage the blade(s) and proceed
slowly straight down the slope.
7. Keep all movement on slopes slow and gradual. Do
not make sudden changes in speed or direction, which
could cause the machine to rollover.
8. Use extra care while operating machines with grass
catchers or other attachments; they can affect the
stability of the unit. Do not use on steep slopes.
9. Do not try to stabilize the machine by putting your foot
on the ground (ride-on units).
10. Do not mow near drop-offs, ditches, or embankments.
The mower could suddenly turn over if a wheel is over
the edge of a cliff or ditch, or if an edge caves in.
11. Do not use grass catchers on steep slopes.
12. Do not mow slopes if you cannot back up them.
13. See your authorized dealer/retailer for
recommendations of wheel weights or counterweights
to improve stability.
14. Remove obstacles such as rocks, tree limbs, etc.
15. Use slow speed. Tires may lose traction on slopes
even through the brakes are functioning properly.
16. Do not turn on slopes unless necessary, and then, turn
slowly and gradually downhill, if possible.
TOWED EQUIPMENT RIDEON UNITS
1. Tow only with a machine that has a hitch designed for
towing. Do not attach towed equipment except at the
hitch point.
2. Follow the manufacturer’s recommendations for
weight limit for towed equipment and towing on slopes.
3. Never allow children or others in or on towed
equipment.
4. On slopes, the weight of the towed equipment may
cause loss of traction and loss of control.
5. Travel slowly and allow extra distance to stop.
6. Do not shift to neutral and coast down hill.
WARNING
Never operate on slopes greater than 17.6 percent
(10°) which is a rise of 3-1/2 feet (106 cm) vertically in
20 feet (607 cm) horizontally.
When operating on slopes use additional wheel
weights or counterweights. See your dealer/retailer to
determine which weights are available and appropriate
for your unit.
Select slow ground speed before driving onto slope.
In addition to front weights, use extra caution when
operating on slopes with rear-mounted grass catchers.
Mow UP and DOWN the slope, never across the face,
use caution when changing directions and DO NOT
START OR STOP ON SLOPE.
8 www.snapper.com
Not for
Reproduction
SERVICE AND MAINTENANCE
Safe Handling of Gasoline
1. Extinguish all cigarettes, cigars, pipes, and other
sources of ignition.
2. Use only approved gasoline containers.
3. Never remove the gas cap or add fuel with the engine
running. Allow the engine to cool before refueling.
4. Never fuel the machine indoors.
5. Never store the machine or fuel container where there is
an open flame, spark, or pilot light such as near a water
heater or other appliance.
6. Never fill containers inside a vehicle or on a truck bed
with a plastic bed liner. Always place containers on the
ground away from your vehicle before filling.
7. Remove gas-powered equipment from the truck or
trailer and refuel it on the ground. If this is not possible,
then refuel such equipment on a trailer with a portable
container, rather than from a gasoline dispenser nozzle.
8. Keep nozzle in contact with the rim of the fuel tank or
container opening at all times until fueling is complete.
Do not use a nozzle lock-open device.
9. If fuel is spilled on clothing, change clothing immediately.
10. Never over-fill the fuel tank. Replace gas cap and tighten
securely.
11. Use extra care in handling gasoline and other fuels.
They are flammable and vapors are explosive.
12. If fuel is spilled, do not attempt to start the engine but
move the machine away from the area of spillage and
avoid creating any source of ignition until fuel vapors
have dissipated.
13. Replace all fuel tank caps and fuel container caps
securely.
Service & Maintenance
1. Never run the unit in an enclosed area where carbon
monoxide fumes may collect.
2. Keep nuts and bolts, especially blade attachment bolts,
tight and keep equipment in good condition.
3. Never tamper with safety devices. Check their proper
operation regularly and make necessary repairs if they
are not functioning properly.
4. Keep unit free of grass, leaves, or other debris build-up.
Clean up oil or fuel spillage. and remove any fuel-soaked
debris. Allow machine to cool before storage.
5. If you strike an object, stop and inspect the machine.
Repair, if necessary, before restarting.
6. Never make adjustments or repairs with the engine
running.
7. Check grass catcher components and the discharge
guard frequently and replace with manufacturer’s
recommended parts, when necessary.
8. Mower blades are sharp. Wrap the blade or wear gloves,
and use extra caution when servicing them.
9. Check brake operation frequently. Adjust and service as
required.
10. Maintain or replace safety and instructions labels, as
necessary.
11. Do not remove the fuel filter when the engine is hot
as spilled gasoline may ignite. Do not spread fuel line
clamps further than necessary. Ensure clamps grip
hoses firmly over the filter after installation.
12. Do not use gasoline containing METHANOL, gasohol
containing more than 10% ETHANOL, gasoline
additives, or white gas because engine/fuel system
damage could result.
13. If the fuel tank must be drained, it should be drained
outdoors.
14. Replace faulty silencers/mufflers.
15. Use only factory authorized replacement parts when
making repairs.
16. Always comply with factory specifications on all settings
and adjustments.
17. Only authorized service locations should be utilized for
major service and repair requirements.
18. Never attempt to make major repairs on this unit
unless you have been properly trained. Improper
service procedures can result in hazardous operation,
equipment damage and voiding of manufacturer’s
warranty.
19. On multiple blade mowers, take care as rotating one
blade can cause other blades to rotate.
20. Do not change engine governor settings or over-speed
the engine. Operating the engine at excessive speed
can increase the hazard of personal injury.
21. Disengage drive attachments, stop the engine, remove
the starter insert, and disconnect the spark plug wire(s)
before: clearing attachment blockages and chutes,
performing service work, striking an object, or if the unit
vibrates abnormally. After striking an object, inspect the
machine for damage and make repairs before restarting
and operating the equipment.
22. Never place hands near the moving parts, such as a
hydro pump cooling fan, when the tractor is running.
(Hydro pump cooling fans are typically located on top of
the transaxle).
23. Units with hydraulic pumps, hoses, or motors:
WARNING: Hydraulic fluid escaping under pressure
may have sufficient force to penetrate skin and cause
serious injury. If foreign fluid is injected into the skin
it must be surgically removed within a few hours by a
doctor familiar with this form of injury or gangrene may
result. Keep body and hands away from pin holes or
nozzles that eject hydraulic fluid under high pressure.
Use paper or cardboard, and not hands, to search for
leaks. Make sure all hydraulic fluid connections are tight
and all hydraulic hoses and lines are in good condition
before applying pressure to the system. If leaks occur,
have the unit serviced immediately by your authorized
dealer.
24. WARNING: Stored energy device. Improper release of
springs can result in serious personal injury. Springs
should be removed by an authorized technician.
25. Models equipped with an engine radiator: WARNING:
Stored energy device. To prevent serious bodily injury
from hot coolant or steam blow-out, never attempt to
remove the radiator cap while the engine is running.
Stop the engine and wait until it is cool. Even then, use
extreme care when removing the cap.
9
en
Not for
Reproduction
Figure 1
Danger Amputation Hazard (EN)
Part No. 7101665
Danger Main Panel
Part No. 1739921
Starter Insert
Part No. 1739028
Transmission Release
Part No. 1730202
Safety Decals
10 www.snapper.com
1730202
Danger Amputation Hazard (FR)
Part No. 7101925
Danger Amputation Hazard (EN)
Part No. 7101665
Danger Amputation Hazard (FR)
Part No. 7101925
Not for
Reproduction
11
This page intentionally left blank.
en
Not for
Reproduction
Features and Controls
STOPSTOP
12V
4
3
2
1
Figure 2
12 www.snapper.com
Not for
Reproduction
Brake Pedal
Depressing the brake pedal applies the tractor
brake.
Ground Speed Pedals
The forward ground speed pedal controls the
tractor’s forward ground speed. The reverse
ground speed pedal controls the tractor’s reverse
ground speed.
Throttle Control
This controls the engine speed. Move the throttle
control FORWARD to increase engine speed and
BACK to decrease engine speed. Always operate
at FULL throttle.
Height-of-Cut Switch
This adjusts the mower cutting height. Press the
switch UP to raise the mowing cutting height
and DOWN to lower the mower cutting height.
The height-of-cut is displayed on the electronic
dashboard.
Starter Insert
When not in use, remove starter insert
and store out of the reach of children.
Remove the starter insert to shutdown
the engine.
Start/Stop Push Button
This starts/stops the engine and
activates the electronic dashboard.
Press and hold the push button to
start the engine.
Press the push button when the
engine is running to shut down the
engine. The electronic dashboard
will turn off after 3 minutes.
Tap the push button when the
engine is not running to activate the
electronic dashboard.
STOPSTOP
Electronic Dashboard
See Electronic Dashboard section.
Power Take-Off (PTO) Switch
This engages and disengages attachments that
use the PTO. To engage the PTO, pull UP on the
switch. Push DOWN to disengage.
NOTE: The operator must be seated firmly in the
tractor seat for the PTO to function.
Cruise Control
This locks the ground speed control in forward.
The cruise control has five lock positions.
Parking Brake
This locks the parking brake when the tractor is
stopped. See Parking Brake section. .
Headlight Switch
This turns the tractor headlights on and off.
Transmission Release Lever
This releases the transmission so that the tractor
can be pushed by hand.
Fuel Tank
To remove the cap, turn counterclockwise.
Power Outlet (12V-DC)
The power outlet is 12V-DC. Accessories must be
rated at 9 amps or less.
12V
Tractor Controls
13
Reverse Mowing Option (RMO)
This allows the operator to mow (or use other
PTO driven attachments) while traveling in
reverse. To activate, turn the RMO key after the
PTO is engaged. The L.E.D. light will illuminate,
and the operator can then mow in reverse. Each
time the PTO is engaged, the RMO needs to be
reactivated if desired.
en
Not for
Reproduction
14 www.snapper.com
A. Total Time / Trip Time / Hours After Servicing
B. Clock
C. Maintenance Display Modes
Oil Change
Replace Air Filter
Sharpen Blades
D. Fuel Level (Full/Empty)
E. Battery Voltage (High/Low)
Electronic Dashboard
The electronic dashboard includes an easy-to-read
electronic display and maintenance minder. The electronic
display monitors critical mower information including fuel
level, running hours, and cutting height (see Figure 3).
Cut Height
4
3
2
1
F
E
Oil Change
Total Trip / Hours AM PM
Air Filter Sharpen
RESET
SCROLL
MODE
Figure 3
Change Between Total Time and Trip Time
1. Press MODE for less than 1 second.
The Total Time automatically resets to 0 after 999.9.
2. Press RESET for greater than 3 seconds to reset the Trip
Time.
Total Trip / Hours
Total Trip / Hours
MODE
RESET
Total Trip / Hours Total Trip / Hours
> 3 sec
< 1 sec
A
B
D
E
F
H
G
F. Height of Cut
G. Control Buttons
H. Message Panel
Low Fuel
Low Battery
Change Oil
Change Air Filter
Sharpen Blades
I. Indicator Light (see Message Panel)
The built-in maintenance minder tells you when to change
the oil, air filter, or sharpen the blades. An amber indicator
light turns on to alert you and the required maintenance is
displayed on the message panel. The electronic dashboard
also includes a digital clock.
C
I
Not for
Reproduction
Set the Clock
1. Press MODE for greater than 3 seconds.
2. Press SCROLL to adjust the hours.
3. Press RESET to adjust the minutes.
4. Press MODE for less than 1 second to save the setting.
MODE
SCROLL
RESET
> 3 sec
hours
AM PM
minutes
Maintenance Display Modes
To view the hours spent on each maintenance task:
1. Press and release SCROLL to select a maintenance
task. The FIGURE at the right shows the number of hours
since the oil was last changed.
To reset the hours to “0” after completing service:
1. Select a maintenance task by pressing and releasing
SCROLL.
2. Press RESET for greater than 3 seconds.
NOTE: RESET must be pressed within 10 seconds,
otherwise the display will return to the Total Time Mode.
NOTE: If the scheduled service time is exceeded by 3 hours,
the system will AUTO RESET to “0”.
Oil Change
Total Trip/Hours
Air Filter
Oil Change
SCROLL
RESET
Total Trip / Hours
Oil Change
Total Trip / Hours
Sharpen
> 3 sec
15
en
Not for
Reproduction
Operation
General Operating Safety
Be sure to read all information in the Operator Safety
section before attempting to operate this unit. Become
familiar with all of the controls and how to stop the unit.
Safety Interlock System Tests
This unit is equipped with a Safety Interlock System. Do not
attempt to bypass or tamper with the switches/devices.
Test 1 — Engine should NOT crank if:
• PTO switch is ON, OR
• Brake pedal is NOT fully depressed (parking brake
OFF), OR
• Operator is NOT in seat, OR
• The cruise control lever is NOT in NEUTRAL.
Test 2 — Engine SHOULD crank and start if:
• Operator is sitting in seat, AND.
• PTO switch is OFF, AND
• Brake pedal is fully depressed (parking brake ON), AND
• The cruise control is in NEUTRAL.
Test 3 — Engine should SHUT OFF if:
• Operator rises off seat with PTO engaged, OR
• Operator rises off seat with brake pedal NOT fully
depressed (parking brake OFF).
Test 4 — Check Mower Blade Stopping Time
Mower blades and mower drive belt should come to a
complete stop within five seconds after electric PTO switch
is turned OFF. If mower drive belt does not stop within five
seconds, see an authorized dealer.
Test 5 — Reverse Mow Option (RMO) Check
• Engine should shut off if reverse travel is attempted if
the PTO has been switched on and RMO has not been
activated.
• RMO light should illuminate when RMO has been
activated.
WARNING
If the unit does not pass a safety test, do not
operate it. See an authorized dealer.
Oil Recommendations
We recommend the use of Briggs & Stratton Warranty
Certified oils for best performance. Other high-quality
detergent oils are acceptable if classified for service SF, SG,
SH, SJ or higher. Do not use special additives.
Outdoor temperatures determine the proper oil viscosity for
the engine. Use the chart to select the best viscosity for the
outdoor temperature range expected.
Check Tire Pressure
Tires should be checked periodically to provide the optimum
traction and to guarantee the best cut (see Figure 4).
NOTE: These pressures may differ slightly from the
“Maximum Inflation” stamped on the side walls of the tires.
** Above 80° F (27° C) the use of 10W30 may cause
increased oil consumption. Check oil level more
frequently.
* Below 40° F (4° C) the use of SAE 30 will result
in hard starting.
80
60
40
120
100
°F
-20
°C
20
Synthetic 5W30
5W30
0
27
15
4
49
38
-29
-7
-18
SAE 30 *
10W30 **
Oil Recommendations
WARNING
Mowing in reverse can be hazardous to bystanders.
Tragic accidents can occur if the operator is not alert to the
presence of children. Never activate the RMO if children
are present. Children are often attracted to the unit and the
mowing activity.
16 www.snapper.com
12-14 psi
(0,82-0,96 bar)
10 psi
(0,68 bar)
Figure 4
Not for
Reproduction
Oil Pressure
If the oil pressure is too low, a pressure switch (if equipped)
will either stop the engine or activate a warning device on
the equipment. If this occurs, stop the engine and check the
oil level with the dipstick.
If the oil level is below the ADD mark, add oil until it reaches
the FULL mark. Start the engine and check for proper
pressure before continuing to operate.
If the oil level is between the ADD and FULL marks, do not
start the engine. Contact an authorized dealer to have the
oil pressure problem corrected.
Check and Add Engine Oil
1. Place the tractor on a level surface (see Figure 5).
Fuel Recommendations
Fuel must meet these requirements:
Clean, fresh, unleaded gasoline.
A minimum of 87 octane/87 AKI (91 RON).
Gasoline with up to 10% ethanol (gasohol) or up to
15% MTBE (methyl tertiary butyl ether) is acceptable.
CAUTION: Do not use unapproved gasolines, such as E85.
Do not mix oil in gasoline or modify the engine to run on
alternate fuels. This will damage the engine components
and void the engine warranty.
To protect the fuel system from gum formation, mix a fuel
stabilizer into the fuel. See the Storage section. All fuel is
not the same. If starting or performance problems occur,
change fuel providers or change brands. This engine is
certified to operate on gasoline. The emissions control
system for this engine is EM (Engine Modifications).
3. Clean the oil fill area of any debris and remove.
4. Remove the dipstick and wipe with a clean cloth (see
Figure 6).
5. Fully insert the dipstick.
6. Remove the dipstick and check the oil level. It should be
at the FULL mark on the dipstick.
7. If FULL, insert the dipstick and tighten securely.
If LOW, add oil slowly into the engine oil fill tube (see Oil
Recommendations). Do not overfill. After adding oil,
wait one minute, then check the oil level.
2. Stop the engine and remove starter insert.
Figure 5
Figure 6
17
en
Not for
Reproduction
Adding Fuel
1. Clean the fuel cap area of dirt and debris. Remove the
fuel cap (A, Figure 7). Also see Features and Controls
section.
2. Fill the fuel tank (B) with fuel. To allow for expansion of
the fuel, do not fill above the bottom of the fuel tank neck
(C).
3. Reinstall the fuel cap.
WARNING
Fuel and its vapors are extremely flammable and
explosive.
Fire or explosion can cause severe burns or
death.
When Adding Fuel
Turn engine off and let engine cool at least 2 minutes
before removing the fuel cap.
Fill fuel tank outdoors or in well-ventilated area.
Do not overfill fuel tank. To allow for expansion of the
fuel, do not fill above the bottom of the fuel tank neck.
Keep fuel away from sparks, open flames, pilot lights,
heat, and other ignition sources.
Check fuel lines, tank, cap, and fittings frequently for
cracks or leaks. Replace if necessary.
If fuel spills, wait until it evaporates before starting
engine.
A
B
C
Figure 7
18 www.snapper.com
1. Check the oil level (see Check and Add Engine Oil).
2. Make sure the starter insert is in place before starting
engine.
WARNING
Engines give off carbon monoxide, an odorless,
colorless, poison gas.
Breathing carbon monoxide can cause nausea,
fainting, or death.
Fire or explosion can cause severe burns or death.
s Start and run engine outdoors.
s $ONOTSTARTORRUNENGINEINENCLOSEDAREAEVENIF
doors or windows are open.
3. Sit in the seat and lift up the seat adjustment lever,
position as desired, and release the lever to lock the seat
in position.
4. Fully depress the brake pedal, OR
Set the parking brake. With the brake pedal fully
depressed, pull up on the parking brake knob, then
release the pedal.
5. Push in the PTO switch to disengage.
6. Move the throttle control to the FAST position.
7. Press the start/stop push button and release as soon as
the engine starts.
NOTE: In the event of an emergency, the tractor/engine
can be immediately stopped by pressing the start/stop push
button or pulling out the starter insert. For normal shut down,
see Stopping the Tractor and Engine section.
Starting the Engine
WARNING
Fuel and its vapors are extremely flammable and
explosive.
Fire or explosion can cause severe burns or
death.
When Starting Engine
Ensure that spark plug, muffler, fuel cap, and air
cleaner (if equipped) are in place and secured.
Do not crank engine with spark plug removed.
If engine floods, set choke (if equipped) to OPEN/RUN
position, move throttle (if equipped) to FAST position
and crank until engine starts.
Not for
Reproduction
19
Driving the Tractor
1. Sit in the seat and adjust the seat so that you can
comfortably reach all the controls and see the dashboard
display (see Features and Controls).
2. Set the parking brake.
3. Make sure the PTO switch is disengaged.
4. Start the engine (see Starting the Engine).
5. Disengage the parking brake and release the brake
pedal.
6. Depress the forward ground speed control pedal to
travel forward. Release the pedal to stop. Note that the
further down the pedal is depressed the faster the tractor
will travel.
7. Stop the tractor by releasing the ground speed control
pedals, setting the parking brake, and stopping the
engine (see Stopping the Tractor and Engine).
Mowing
1. Set the mower cutting height to the desired level using
the height of cut control (see Features and Controls).
2. Set the parking brake. Make sure the PTO switch is
disengaged.
3. Start the engine (see Starting the Engine).
4. Set the throttle to FULL.
5. Engage the PTO to activate the mower blades.
6. Release parking brake then begin mowing.
7. When finished mowing, shut off the PTO.
8. Press the start/stop push button to STOP the engine
(see Stopping the Tractor and Engine).
WARNING
The engine will shut off if the reverse ground speed
pedal is depressed while the PTO is on and the RMO has
not been activated. The operator should always turn the
PTO off prior to driving across on roads, paths, or any area
that may be used by other vehicles. Sudden loss of drive
could create a hazard.
The Reverse Mowing Option (RMO) allows the operator to
mow in reverse (see Features and Controls). To activate,
turn the RMO key after the PTO is engaged. The L.E.D. light
will illuminate, and the operator can then mow in reverse.
Each time the PTO is engaged the RMO needs to be
reactivated if desired. The key should be removed to restrict
access to the RMO.
Pushing the Tractor by Hand
1. Disengage the PTO and turn the engine off (see
Features and Controls).
2. Pull out the lever approximately 2-3/8" (6 cm) to release
the transmission (see Figure 8).
3. The tractor can now be pushed by hand.
WARNING
Mowing in reverse can be hazardous to bystanders.
Tragic accidents can occur if the operator is not alert to the
presence of children. Never activate the RMO if children
are present. Children are often attracted to the unit and the
mowing activity.
Reverse Mowing Option (RMO
TM
)
WARNING
Towing the unit will cause transmission damage.
$ONOTUSEANOTHERVEHICLETOPUSHORPULLTHISUNIT$ONOT
actuate the transmission release lever while the engine is
running.
1730202
Figure 8
en
Not for
Reproduction
Adjusting the Mower Cutting Height
Use the height-of-cut switch to raise or lower the mower
cutting height (see Features and Controls).
Press the switch UP to raise the mowing cutting height and
DOWN to lower the mower cutting height. The height-of-cut
is displayed on the electronic dashboard.
Cruise Control
TO ENGAGE:
1. Depress the forward ground speed pedal (see Features
and Controls).
2. Pull up the cruise control when the desired speed is
reached. The cruise will lock in one of its five locking
positions.
TO DISENGAGE:
1. Depress the brake pedal.
OR
2. Depress the forward ground speed pedal.
Parking Brake
Use the parking brake control to lock or unlock the
parking brake when the tractor is stopped (Features and
Controls).
Locking the Parking Brake - To lock the parking brake,
fully depress the brake pedal, pull up on the parking brake
control, and release the brake pedal.
Unlocking the Parking Brake - To unlock the parking
brake, fully depress the brake pedal, press down on the
parking brake control, and release the brake pedal.
6. Set the parking brake. Depress the brake pedal, pull up
on the parking brake control, then release the pedal.
NOTE: In the event of an emergency, the tractor/engine
will stop immediately by pressing the on/off push button or
pulling out the starter insert.
Stopping the Tractor and Engine
WARNING
Fuel and its vapors are extremely flammable and
explosive.
Fire or explosion can cause severe burns or
death.
Do not choke the carburetor to stop the engine.
1. While still on the lawn, disengage the PTO switch, then
wait for all moving parts to stop (see Features and
Controls).
2. Release the ground speed pedals to return to the
NEUTRAL position.
3. Shut-down at about 1/2 throttle to make sure after fire
solenoid is active.
4. Press the start/stop push button to STOP the engine.
5. Remove the starter insert and keep out of the reach of
children.
20 www.snapper.com
Not for
Reproduction
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68

Simplicity 2690889 Manuel utilisateur

Catégorie
Tondeuses à gazon
Taper
Manuel utilisateur
Ce manuel convient également à

dans d''autres langues