EGO Nexus PST3040 Manuel utilisateur

WARNING: To reduce the risk of injury, the user must read and understand the

Operator’s Manual before using this product. Save these instructions for future reference.

NEXUS POWER STATION

OPERATOR’S MANUAL

56-VOLT

NEXUS POWER STATION

MODEL NUMBER PST3040/ PST3040-FC

PURE SINE WAVE

NEXUS POWER STATION

RESET

Español p. 67

Français p. 33

56-VOLT NEXUS POWER STATION - PST3040/ PST3040-FC2

TABLE OF CONTENTS

FCC Statement ...........................................4

Safety Symbols ..........................................5

Safety Instructions .....................................6-10

Introduction ............................................11

Specications ..........................................11

Packing List ............................................12

Description .........................................13-18

Operation ...........................................19-26

Maintenance ...........................................27

Troubleshooting ......................................28-29

Warranty ...........................................30-31

56-VOLT NEXUS POWER STATION - PST3040/ PST3040-FC 3

READ ALL INSTRUCTIONS!

READ & UNDERSTAND

OPERATOR’S MANUAL

WARNING: To reduce the risk of injury, re, or electric shock, the user must read

and understand the operator’s manual for their USB accessories and AC devices in

addition to this Operator’s Manual. Ensure compatibility before using this power station.

Do not use this product if a part is damaged or missing.

56-VOLT NEXUS POWER STATION - PST3040/ PST3040-FC4

FCC STATEMENT

1. This device complies with Part 15 of the FCC Rules. Operation is subject to the

following two conditions:

1) This device may not cause harmful interference.

2) This device must accept any interference received, including interference that

may cause undesired operation.

2. Changes or modications not expressly approved by the party responsible for

compliance could void the user’s authority to operate the equipment.

NOTICE: This equipment has been tested and found to comply with the limits

for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are

designed to provide reasonable protection against harmful interference in a residential

installation. This equipment generates, uses, and can radiate radio frequency energy

and, if not installed and used in accordance with the instructions, may cause harmful

interference to radio communications. However, there is no guarantee that interference

will not occur in a particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be determined by turning the

equipment off and on, the user is encouraged to try to correct the interference by one

or more of the following measures: Reorient or relocate the receiving antenna. Increase

the separation between the equipment and receiver. Connect the equipment into an

outlet on a circuit different from that to which the receiver is connected. Consult the

dealer or an experienced radio/TV technician for help.

56-VOLT NEXUS POWER STATION - PST3040/ PST3040-FC 5

SAFETY SYMBOLS

The purpose of safety symbols is to attract your attention to possible dangers. The

safety symbols and the explanations with them deserve your careful attention and

understanding. The symbol warnings do not, by themselves, eliminate any danger. The

instructions and warnings they give are no substitutes for proper accident prevention

measures.

WARNING: Be sure to read and understand all safety instructions in this

Operator’s Manual, including all safety alert symbols such as “DANGER,” “WARNING,”

and “CAUTION” before using this tool. Failure to following all instructions listed below

may result in electric shock, re, and/or serious personal injury.

SYMBOL MEANING

SAFETY ALERT SYMBOL: Indicates DANGER, WARNING, OR CAUTION. May

be used in conjunction with other symbols or pictographs.

WARNING: The operation of any power tools can result in foreign objects being

thrown into your eyes, which can result in severe eye damage. Before beginning power

tool operation, always wear safety goggles or safety glasses with side shields and a

full face shield when needed. We recommend a Wide Vision Safety Mask for use over

eyeglasses or standard safety glasses with side shields. Always use eye protection

which is marked to comply with ANSI Z87.1.

56-VOLT NEXUS POWER STATION - PST3040/ PST3040-FC6

SAFETY INSTRUCTIONS

This page depicts and describes safety symbols that may appear on this product. Read,

understand, and follow all instructions on the machine before attempting to assemble

and operate it.

V Volt Voltage

A Amperes Current

Hz Hertz Frequency (cycles per second)

W Watt Power

/DC

Direct Current Type or a characteristic of current

/AC

Alternating

Current

Type or a characteristic of current

°F

Fahrenheit

Temperature

°C

Celsius

Temperature

lb Pound Weight

kg Kilogram Weight

Read &

Understand

Operator’s

Manual

To reduce the risk of injury, user must read

and understand operator’s manual before

using this product.

Safety Alert Indicates a potential personal injury hazard.

56-VOLT NEXUS POWER STATION - PST3040/ PST3040-FC 7

Eye Protection

Always wear safety goggles or safety glasses

with side shields and a full face shield when

operating this product.

WIFI Indicates WIFI connection.

Bluetooth Indicates Bluetooth connection.

WARNING: Read and understand all instructions. Failure to

follow all instructions listed below may result in electric shock, re

and/or serious personal injury.

WARNING: Do not allow any liquid to get inside the power station, or electric

shock may occur.

56-VOLT NEXUS POWER STATION - PST3040/ PST3040-FC8

IMPORTANT SAFETY INSTRUCTIONS

WARNING: When using this product, basic precautions should always be

followed, including the following:

 Read all the instructions before using the product.

 NEVER leave the power station on and unattended. Unattended operation of this

product could result in personal injury or property damage. Switch off the power

station when not in use.

 To reduce the risk of injury, close supervision is necessary when the product is

used near children.

 Do not put ngers or hands into the product.

 Use of an attachment not recommended or sold by power station manufacturer

may result in a risk of re, electric shock, or injury to persons.

 To reduce risk of damage to the electric plug and cord, pull the plug rather than

the cord when disconnecting the power station.

 ALWAYS ensure that the power station charger-in cord is easily accessible during

operation to allow for quick disconnection from the mains.

 Inspect extension cords before use and replace with new cord if required. Contact

with worn or damaged extension cords could result in electrocution.

 Do not operate the power pack with a damaged cord or plug, or a damaged output

cable.

 Do not use a power station or appliance that is damaged or modied. Damaged or

modied products may exhibit unpredictable behavior resulting in re, explosion

or risk of injury.

 When charging the battery, work in a well-ventilated area and do not restrict

ventilation in any way.

 ALWAYS operate the power station in a clean, dry, well ventilated area. Make

sure hands are dry before touching this product. Water can conduct electricity!

Water which comes in contact with electrically charged components can transmit

electricity resulting in electrical shock to anyone contacting them.

 Do not expose the power station to rain or wet conditions. Water entering the

power station will increase the risk of electric shock.

56-VOLT NEXUS POWER STATION - PST3040/ PST3040-FC 9

 Do not insert battery packs into charging ports, plug the power station in, or plug

any device into the power station’s power receptacle if moisture is detected on or

in the power station.

 Place the power station on a stable, at surface where it will not fall or tip over.

 Do not use the power station to power medical or other critical devices.

 Under abusive conditions, liquid may be ejected from the battery; avoid contact. If

contact accidentally occurs, ush with water. If liquid contacts eyes, additionally

seek medical help. Liquid ejected from the battery may cause irritation or burns.

 Do not expose the power station to re or excessive temperature. Exposure to re

or temperature above 212°F (100°C) may cause explosion.

 The power station is not intended for any use other than charging USB electronics

(up to 2.1 Amp for each USB port) or AC devices (up to continuous 2000W for 3 AC

ports combined). Any other use may result in system shut down or even damage.

 Use power station only with EGO 56V portable battery packs. Use of any other

battery packs may create a risk of injury and re.

 The power station is not intended for use in a commercial repair facility.

 For the power station charger, basic precautions should always be followed,

including the following:

1) SAVE THESE INSTRUCTIONS - This manual contains important safety and

operating instructions for battery charger Models CH1700/CH1700-FC.

2) Before using battery charger, read all instructions and cautionary markings on

battery charger, battery, and product using battery.

3)

CAUTION: To reduce risk of injury, charge only EGO 56V, maximum

10000 mAh Li-Ion portable type rechargeable batteies. Other types of

batteries may burst causing personal injury and damage.

4) Dry location use only.

5) Do not expose to rain.

 Do not disassemble the power station, take it to a qualied service person when

service or repair is required. Incorrect reassembly may result in a risk of re or

electric shock.

56-VOLT NEXUS POWER STATION - PST3040/ PST3040-FC10

 Have your power station or the charger serviced by a qualied repairperson using

only identical replacement parts. This will ensure that the safety of the power

station is maintained.

 To reduce the risk of electric shock, unplug the power station from the outlet

before attempting any instructed servicing.

 Save these instructions. Refer to them frequently and use them to instruct

others who may use this tool. If you lend someone this tool, lend them these

instructions also to prevent misuse of the product and possible injury.

SAVE THESE INTRUCTIONS!

56-VOLT NEXUS POWER STATION - PST3040/ PST3040-FC 11

INTRODUCTION

Congratulations on your selection of the EGO Nexus Power Station. It has been

designed, engineered and manufactured to give you the best possible dependability

and performance.

Should you experience any problem you cannot easily remedy, please contact the EGO

customer service center 1-855-EGO-5656.

This manual contains important information on to the safe assembly, operation and

maintainance of your product. Read it carefully before using the product. Keep this

manual handy so you can refer to it at any time.

SERIAL NUMBER _____________________ DATE OF PURCHASE _________________

YOU SHOULD RECORD BOTH SERIAL NUMBER AND DATE OF PURCHASE AND KEEP IN A SAFE

PLACE FOR FUTURE REFERENCE

SPECIFICATIONS

Discharging

Input Voltage

56V

USB Output

5V

Max.2.1A (each USB port)

AC Output

120V ~ 60Hz

2000W, 3000W Peak (3 AC

ports combined)

Charging

Input 120V ~, 60Hz 170W

Output

56V

Charging Temperature

Range

41°F-104°F (5°C-40°C)

Operation Temperature Range 5°F - 104°F (-15°C - 40°C)

Storage Temperature Range -4°F - 158°F (-20°C - 70°C)

Weight (Without battery pack) 30.2 lb (13.7 kg)

56-VOLT NEXUS POWER STATION - PST3040/ PST3040-FC12

PACKING LIST

PART NAME QUANTITY

Power Station 1

Charger 1

Power Cord 2

Front Waterproof Cover 1

Back Waterproof Cover 1

Screws 7

Operator’s Manual 1

56-VOLT NEXUS POWER STATION - PST3040/ PST3040-FC 13

DESCRIPTION

KNOW YOUR POWER STATION (Fig.1a & 1b & 1c)

The safe use of this product requires an understanding of the information on the tool

and in this operator’s manual, as well as knowledge of the project you are attempting.

Before the use of this product, familiarize yourself with all its operating features and

safety rules.

PURE SINE WAVE

NEXUS POWER STATION

1a

Back Waterproof Cover

Front Waterproof Cover

Cover Release Button

Waterproof Cover for USB Ports

Waterproof Cover for AC Ports

Battery-mounting Slots

Latch

Electric Contacts

Handle

Screw

Cover

Charger

Power Cords

Velcro Straps

LCD Screen

56-VOLT NEXUS POWER STATION - PST3040/ PST3040-FC14

1b

Charger Socket

Fuse (80A)

Fuse Compartment Cover

Air Outles

RESET

NEXUS POWER STATION

RESET

NEXUS POWER STATION

1c

USB Ports

AC Ports

Power Button

Reset Button

USB Button

Air Inlets

AC Button

WIFI/Bluetooth

Setting Button

56-VOLT NEXUS POWER STATION - PST3040/ PST3040-FC 15

Charger

The power station can charge up to four EGO portable batteries through the supplied

charger and the power cords.

Handle

To help lift the power station.

Cover

To support the charger, as well as a cover for power-cord storage.

Velcro Straps

To secure the charger to the cover for compact convenience.

Power Cords

There are two power cords. One is for connecting the charger with the power station;

the other is for connecting the charger with the power supply. The power station can

charge EGO portable battery(s) once the connections are completed.

LCD Screen

To display the working status of the power station.

Front/Back Waterproof Cover

The front and back waterproof covers are not assembled when shipping. They are

separately stored in the package. The users can mount them with the screws provided,

as needed.

Latch

To help securely lock the battery when installing the battery on the power station.

Charger Socket

To connect the power station to the charger with the provided power cord.

56-VOLT NEXUS POWER STATION - PST3040/ PST3040-FC16

Power Button

To turn on/off the power station.

Reset Button

To recover the power station when it is overloaded.

AC and USB Ports

To connect with AC and USB devices. There are 3 AC ports and 4 USB ports.

AC and USB Button

To switch on/off the AC and USB port output.

WIFI/Bluetooth Setting Button

To congure WIFI/Bluetooth connection and indicate conguration status.

KNOW THE ICONS AND INDICATORS ON THE LCD SCREEN (Fig. 2)

2

Over-heat Icon WIFI Icon Bluetooth Icon USB Icon AC Icon Peak-power Indicator Overload Reminder

Actual Output

Power Indicator

Overload Indicator

Countdown Timer

Rated Power IndicatorLow-power Indicator

Battery

Indicator

Area

Warning Indicator

Output

Indicator

Charging

Indicator

Charge-

complete

Indicator

56-VOLT NEXUS POWER STATION - PST3040/ PST3040-FC 17

Output Indicator

Illuminates to show that the power station is in the discharging process when the AC/

USB button is switched on.

Charging Indicator

Illuminates to show the power station is in the charging process.

Charge-complete Indicator

The charge-complete indicator, together with the charging indicator will illuminate to

indicate that the charging is completed.

Actual Output Power Indicator

Illuminates different numbers of the segments to indicate the actual output power

when a device is connected to the output port.

Rated Power Indicator (600W, 1200W, 2000W)

The rated maximum continuous output power depends on the attached battery(s) on

the Nexus power station.

Peak-power Indicator (3000W)

When the actual output power is over 2000W, but less than 3000W, for LESS THAN

3 seconds, this indicator will illuminate, as well all the segments of the actual output

power.

Overload Indicator

This indicator is separated into 3 segments. When the actual output power is over the

rated power, the corresponding segment will illuminate in red. The overload reminder

“PRESS AND HOLD RESET BUTTON” and the warning indicator “ ” will illuminate in

red at the same time. Remove the device and then press and hold the reset button to

reactivate the power station.

56-VOLT NEXUS POWER STATION - PST3040/ PST3040-FC18

Low-power Indicator

Illuminates when the available battery charge is 10% or less of the rated total battery

charge during discharging. No available time will be displayed on the LCD screen and

the power station will stop discharging when all batteries are fully discharged.

Warning Indicator

Illuminates when a problem occurs and the power station cannot work properly.

Battery Indicator Area

Each indicator includes three aspects:

 The upper and lower polygonal areas indicate the status of the associated battery;

 The circled power indicator in segments indicates the remaining battery charge;

 The battery number indicates the battery position.

Over-heat Icon

Illuminates when the Nexus is overheated. The system will shut down.

WIFI Icon

Illuminates when the Nexus is connected to a WIFI Network.

Bluetooth Icon

Illuminates when the Nexus is connected to cell phone via Bluetooth.

USB/AC Icon

Illuminates to indicate that the USB/AC port has been turned on.

Countdown Timer

This timer indicates the remaining time of charging or discharging process. When the

Nexus stops working or is in low power condition, no timer will be displayed.

56-VOLT NEXUS POWER STATION - PST3040/ PST3040-FC 19

OPERATION

WARNING: Do not allow familiarity with this product to make you careless.

Remember that a careless fraction of a second is sufcient to inict serious injury.

WARNING: Do not use any attachments or accessories not recommended by the

manufacturer of this product. The use of attachments or accessories not recommended

can result in serious personal injury.

WARNING: Do not modify or attempt to repair the Nexus power station except

indicated in the instructions for use and care.

CAUTION: This device is not intended for use in a commercial repair facility.

CAUTION: The device shall be stored indoors and protected from the elements.

The unit shall not be charged outdoors. When in use, steps should be taken to reduce

the exposure to rain, sleet, snow, and the like.

APPLICATION

You may use this product for power emergencies, camping, and any time you need

power for long periods of time.

The Nexus power station provides 4 USB ports and 3 AC ports. Each USB port can

supply a 5V DC, up to 2.1Amp output to power the USB devices like your cell phone,

tablets, etc. The 3 AC ports combined can supply a 120V AC, continuous 2000W (Peak

3000W for less than 3s) output to power AC devices, such as full-size refrigerator, TV,

laptop, etc.

The Nexus power station is equipped with a charger to charge up to four EGO portable

batteries.

56-VOLT NEXUS POWER STATION - PST3040/ PST3040-FC20

CHARGING EGO PORTABLE BATTERIES (Fig. 3)

3

Power Supply

Supplied Charger

Supplied Power Cords

Battery

1. Connect the supplied charger between the power supply (120V~, 60Hz) and

the Nexus power station with the two supplied power cords. Make sure that the

connections are secure and reliable.

2. Align the raised ribs of the battery pack with the mounting slot in the Nexus

power station; slide the battery pack down onto the Nexus. Make sure that the

battery is securely attached to the Nexus.

3. The Nexus power station will communicate with the battery pack and begin

charging the battery.

4. The charging indicators on the LCD screen will illuminate and the power button

will slowly blink green. The screen displays the remaining charge time in

hours and minutes until the battery will be fully charged. When the charging is

completed, the charge-complete indicator will also illuminate and the power

button will shine solid green.

NOTE: During the charging process, the LCD screen may turn black no display. You

can press any of the Power/USB/AC/Reset buttons or reattach the battery to reactivate

the display.

La page charge ...

EGO Nexus PST3040 Manuel utilisateur

Ce manuel convient également à

EGO Nexus PST3040 Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents