Huawei WiFi AX2 Mode d'emploi

Quick Start Guide

1

Contents

Quick Start Guide ................................................... 1

Guide de démarrage rapide ................................... 14

Schnellstartanleitung ............................................ 27

Guida rapida ....................................................... 40

Snelstartgids ....................................................... 53

Guia de início rápido ............................................. 66

Guía de inicio rápido ............................................. 79

1

Quick Start Guide

WAN/LAN auto-adaptation port: Connects to the Internet (such as optical

modem, broadband modes, etc.) and wired network device such as a computer.

WPS/RESET button: provides the functions of both the WPS button and the RESET

button.

Power port

Indicator 2

3

4

1

WPS/RESET

POWER

2 43

1000M WAN/LAN

1 2 3

1

2 3

POWER

LAN

PON

RESET

WPS/RESET

POWER

1000M WAN/LAN

1 2 3

Step 1: Connecting the cables

WAN

LAN Internet

Optical/Broadband/cable modem

(from your broadband provider)

•Erect the all antennas upright to ensure optimized Wi-Fi® signal.

•If the indicator stays red, this indicates that the router is not connected to the Internet.

Please refer to "Step 2: Conguring the network settings".

• For routers that support WAN/LAN auto-adaptation, the network ports are WAN/LAN

combo ports. You can also specify a xed WAN port on the router's web-based

management page.

2 3

1Connect your mobile phone or computer

to the router's Wi-Fi network (no

password required).

Check for the Wi-Fi name on the bottom of

the new router.

Wi-Fi

Connected

2Open the browser, you will be

automatically redirected.

(If the page is not displayed

automatically, enter 192.168.3.1) .

Let's get started

Step 2: Conguring the network settings

XXXXXX Wi-Fi Name: XXXXXX

4 5

3Enter your broadband account and password.

If your Internet connection does not require an account and password, please skip to

the next step.

Internet access wizard

Broadband account

Broadband password

VLAN

account and password, contact your

broadband carrier to obtain a broadband

account and password.

• If you need to congure VLAN on your

network, contact your broadband carrier to

conrm the VLAN parameters, and enable

the VLAN switch on the screen.

4 5

4Set a new Wi-Fi name, Wi-Fi password, and admin password for the new router.

Internet access wizard

Prioritize 5 GHz

Wi-Fi network name

Wi-Fi network password

Login password

Conguration complete.

Enable Prioritize 5 GHz: Priority usage of 5 GHz Wi-Fi band over 2.4 GHz band when signal

strength is equal to increase connection speeds.

Conrm password

6 7

Indicator

Steady green

Steady red

Flashing

Connected to the network

Not connected to the network

•Loose cable or connect error. Check the cable.

•Broadband network error. Contact your broadband carrier.

The router has detected a pairable device.

When other HUAWEI devices (support HarmonyOS Connect) are detected,

the indicator on the HUAWEI WiFi AX2 will flash. When this happens,

press the HUAWEI WiFi AX2's WPS/RESET button. The indicator should

flash quickly, indicating that the pairable device is connecting to the

HUAWEI WiFi AX2. The connection process is complete when the indicator

stops ashing.

If you touched the WPS/RESET button by accident, wait for 2 minutes till the

indicator returns to normal.

Manage the router with our mobile app

Scan the QR code to download and install the HUAWEI AI Life

App on your mobile phone or tablet. You can use the app to

manage your router.

6 7

Frequently Asked Questions (FAQ)

Q1: What can I do if I encounter any of the following issues when conguring the router?

• If your device did not detect the router's Wi-Fi: Ensure that the router is powered on. Wait for a

moment (till the router is started) and try to search again on your device.

•If you cannot visit the router's conguration page on your device: Ensure that your device is

connected to the router's Wi-Fi network, and then enter 192.168.3.1 in the browser to visit this

page on your device.

•If the page displays "Cable disconnected": Ensure that the router's WAN port is connected to

the modem's LAN port, and the modem has Internet access. Check that all joints are securely

connected and in good contact, and the network cables are in good condition.

If the issue persists, restore the router to the factory settings, and follow the guide to reconnect the

cables and congure the router.

Q2: How do I restore the router to its factory settings?

Connect the router to the power supply and wait until the router completes the startup process.

Press the WPS/RESET button on the router for more than 8 seconds until the indicator light

goes out. Wait for the router to complete the restart process. When the indicator turns red, this

indicates that the router has been restored to its factory settings.

If the router has been factory reset, you need to congure it again.

8 9

Q5: What should I do if I forget my login password for the app or the router's web-

based management page?

Try using the router's Wi-Fi password to login. If the issue persists, restore the router to the

factory settings.

Q3: How do I connect an add-on HUAWEI router (with H/Hi button) to my HUAWEI WiFi

AX2's network?

You can connect the router in either of the following ways:

•Wired connection. Connect the WAN port of the add-on router (new or restored to factory

settings) to the LAN port of the congured HUAWEI WiFi AX2 using an Ethernet cable.

•Wireless connection. Step 1: Place the add-on router (new or restored to factory settings)

within one meter of the congured HUAWEI WiFi AX2 and connect it to the power supply. Step 2:

When the indicator on the HUAWEI WiFi AX2 starts to ash, press the WPS/RESET button on it.

Wait until the indicator on the add-on router shows it is connected to the network.

"HUAWEI router" refers to routers that support HarmonyOS Mesh+. Please check if your

device supports such feature.

Q4: How do I connect a Wi-Fi device to my router using WPS?

When your router is powered on, press its WPS/RESET button, and then press the WPS button on

the Wi-Fi device (such as a phone) within two minutes, to initiate standard WPS negotiation and

connect the Wi-Fi device to the router's Wi-Fi network.

8 9

Safety information

Operation and safety

• Do not use your device if using the device is prohibited. Do not use the device if doing so

causes danger or interference with other electronic devices.

• Pacemaker manufacturers recommend that a minimum distance of 15 cm be maintained

between a device and a pacemaker to prevent potential interference with the pacemaker.

If using a pacemaker, hold the device on the side opposite the pacemaker and do not carry

the device in your front pocket.

• Avoid dusty, damp, or dirty environments. Avoid magnetic elds. Using the device in these

environments may result in circuit malfunctions.

• Ideal operating temperatures are 0 °C to 40 °C. Ideal storage temperatures are -40 °C to +70 °C.

Extreme heat or cold may damage your device or accessories.

• Keep the device and accessories in a well-ventilated and cool area away from direct

sunlight. Do not enclose or cover your device with towels or other objects. Do not place the

device in a container with poor heat dissipation, such as a box or bag.

• The device should be installed and operated with a minimum distance of 20 cm between

the radiator and your body.

• Using an unapproved or incompatible power adapter, charger, or battery may damage your

device, shorten its lifespan, or cause a re, explosion, or other hazards.

10 11

• For pluggable devices, the socket-outlet shall be installed near the devices and shall be

easily accessible.

• Unplug the power adapter from electrical outlets and the device when not in use.

• Do not touch the device or the charger with wet hands. Doing so may lead to short circuits,

malfunctions, or electric shocks.

• The device should be installed at a position no more than 2 m from the ground.

Disposal and recycling information

The symbol on the product, battery, literature, or packaging means that the products

and batteries should be taken to separate waste collection points designated by local

authorities at the end of the lifespan. This will ensure that EEE waste is recycled and

treated in a manner that conserves valuable materials and protects human health and

the environment.

For more information, please contact your local authorities, retailer, or household waste

disposal service or visit the website https://consumer.huawei.com/en/.

Reduction of hazardous substances

This device and its electrical accessories comply with local applicable rules on the restriction

of the use of certain hazardous substances in electrical and electronic equipment, such as

EU REACH regulation, RoHS and Batteries (where included) directive. For declarations of

conformity about REACH and RoHS, please visit the website

https://consumer.huawei.com/certication.

10 11

EU regulatory conformance

Statement

Hereby, Huawei Device Co., Ltd. declares that this device WS7001 is in compliance with the

following Directive: RED 2014/53/EU, RoHS 2011/65/EU, ErP 2009/125/EC.

The full text of the EU declaration of conformity, the detailed ErP information and most recent

information about accessories & software are available at the following internet address:

https://consumer.huawei.com/certication.

Restrictions in the 5 GHz band:

The 5150 to 5350 MHz frequency range is restricted to indoor use in: AT, BE, BG, CH, CY, CZ,

DE, DK, EE, EL, ES, FI, FR, HR, HU, IE, IS, IT, LI, LT, LU, LV, MT, NL, NO, PL, PT, RO, SE, SI, SK, TR,

UK(NI).

In accordance with the relevant statutory requirements in the UK, the 5150 to 5350 MHz

frequency range is restricted to indoor use in the United Kingdom.

Frequency Bands and Power

The frequency bands and transmitting power (radiated and/or conducted) nominal limits

applicable to this radio equipment are as follows: Wi-Fi 2.4G: 20 dBm, Wi-Fi 5G: 5150-5350

MHz: 23 dBm, 5470-5725 MHz: 30 dBm.

12 13

Legal Notice

THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOES NOT CONSTITUTE ANY

KIND OF WARRANTIES.

Trademarks and Permissions

Wi-Fi®, the Wi-Fi CERTIFIED logo, and the Wi-Fi logo are trademarks of Wi-Fi Alliance.

Other trademarks, product, service and company names mentioned may be the property of

their respective owners.

Version Update

In order to improve the security of the product and provide you with a better user experience,

we will push version update information to you on a regular basis when an important update

is released.

Privacy Policy

To better understand how we use and protect your personal information, please see the

privacy policy at https://consumer.huawei.com/privacy-policy.

End User License Agreement

Please read and agree to the End User License Agreement (HUAWEI EULA) on the product’s

management page before using the product.

12 13

For More Help

Please visit https://consumer.huawei.com/en/support/hotline for recently updated hotline and

email address in your country or region.

14 15

Guide de démarrage rapide

Bouton WPS/RESET: ore les fonctions du bouton WPS et du bouton RESET.

Port d'auto-adaptation WAN/LAN: connecte à Internet (modem optique, modems

haut débit, etc.) et à un appareil de réseau laire (ordinateur, par exemple).

Port d'alimentation

Voyant 2

3

4

1

WPS/RESET

POWER

2 43

1000M WAN/LAN

1 2 3

1

14 15

POWER

LAN

PON

RESET

WPS/RESET

POWER

1000M WAN/LAN

1 2 3

Étape 1: brancher les câbles

WAN

LAN Internet

Modem optique/haut débit/câble

(de votre fournisseur d'accès haut débit)

•Placez toutes les antennes en position verticale pour garantir un signal Wi-Fi® optimal.

• Si le voyant reste rouge, cela signie que le routeur n'est pas connecté à Internet.

Veuillez vous référer à "Étape 2 : congurer les paramètres réseau".

• Sur les routeurs qui prennent en charge l'auto-adaptation WAN/LAN, les ports réseau sont

des ports WAN/LAN combinés. Vous pouvez également spécier un port WAN xe dans la

page web d'administration du routeur.

16 17

1Connectez votre téléphone portable ou

votre ordinateur au réseau Wi-Fi du routeur

(pas de mot de passe requis).

Vériez le nom du Wi-Fi (Wi-Fi name) indiqué

sur la partie inférieure du nouveau routeur.

Wi-Fi

Connecté

2Ouvrez le navigateur, vous serez

automatiquement redirigé.

(Si la page ne s'ache pas

automatiquement, saisir

192.168.3.1).

Commençons

Étape 2: congurer les paramètres réseau

XXXXXX Wi-Fi Name: XXXXXX

16 17

3Saisissez le compte et le mot de passe du haut débit.

Si votre connexion Internet n'exige aucun compte ni mot de passe, veuillez passer à

l'étape suivante.

Assistant d'accès à

Internet

Compte haut débit

Mot de passe du haut

débit

VLAN

de passe du haut débit, contactez votre

fournisseur d'accès haut débit pour les

obtenir.

• Si vous devez congurer le réseau local

virtuel (VLAN) sur votre réseau, contactez

votre fournisseur d'accès haut débit pour

conrmer les paramètres du réseau local

virtuel, puis activez le bouton VLAN à l'écran.

18 19

4Dénissez un nouveau nom et mot de passe pour le réseau Wi-Fi, ainsi qu'un mot

de passe d'administrateur pour le nouveau routeur.

Priorité au 5 GHz

Nom du réseau Wi-Fi

MDP réseau Wi-Fi

Activez Priorité au 5GHz : le réseau Wi-Fi 5 GHz sera utilisé en priorité par rapport au réseau

Wi-Fi 2.4 GHz quand la force du signal est équivalente, permettant des vitesses de connexion

accrues.

Mot de passe de connexion

Assistant d'accès à

Internet Assistant d'accès à

Internet

Conrmer le mot de passe

La page est en cours de chargement...

Huawei WiFi AX2 Mode d'emploi

Huawei WiFi AX2 Mode d'emploi

dans d''autres langues

Documents connexes

Autres documents