Emac NRECAL1570PL Guide d'installation

Taper
Guide d'installation

Ce manuel convient également à

R03.001_19/12/2016
TECHNICAL FILE
Novorodapie® Eclipse is a prole made of aluminum to be installed
as a skirting in plasterboard walls. Thanks to its geometry, the prole
protects the bottom edge of the wall, generating an innovative
hollow effect like if the wall was suspended in the air. Its simple
lines, nished with a small curve, create a smooth surface that
avoids the accumulation of dirtiness and makes easy the cleaning.
In addition to be a skirting, this prole can also be a nish the top
of the wall. Optionally a LED strip can be installed in the interior
hollow , providing the prole with a double functionality and a high
decorative value.
Novorodapie® Eclipse
Page 1 of 3
R03.001_19/12/2016
TECHNICAL FILE
Material: Anodized aluminum
Length: 2,5 ml
Dimensions:
a: 13/15 mm
h: 70 mm
Finishes: Matt silver
Applications
Novorodapie® Eclipse is a skirting prole made of matt silver anodized aluminium. This skirting has
been designed to protect the bottom of plasterboard walls, providing with functionality and a high
decorative value. Easy to install by using adhesives.
Alloy: 6063 - T5
Fire resistance: M0 (UNE 23-727-90)
Abrasion resistance: High
Lightfastness: Excellent
Appearance and color: EN 12373-1
Materials
Novorodapie® Eclipse
Technical features
Novorodapie® Eclipse is an easy-to-install prole. It can be installed before or after the work.
1. Install the plasterboards on the walls leaving a space on the bottom to install the skirting.
2. Apply mounting adhesive or polyurethane mastic on the rear of the prole.
3. Place the prole and press it rmly to ensure an optimal adhesion
4. Remove the possible leftover adhesive and let dry
You can also begin installing the prole and then continue installing the plasterboard panels.
Installation
General Features
Page 2 of 3
Novorodapie® Eclipse is a prole made by extrusion of aluminum. The anodizing process improves the
corrosion resistance, mechanical resistance and appearance of proles. It has the quality seal Quala-
nod, which guarantees the quality of the process and the resulting proles. This seal regulates several
tests: appearance and color, thickness measurements, sealing and impregnation control, abrasion re-
sistance, lightfastness, acetic saline chamber and nitric acid immersion.
The aluminum has excellent chemical, physical and mechanical properties. It is lightweight, tough,
ductile, malleable and highly durable
TECHNICAL FILE
R03.001_19/12/2016
You can nd out more information about the technical features of Emac®’s products by downloading
its Technical File in www.emac.es.
If you have any query, please contact our Technical Department in [email protected].
Technical information
Emac Complementos S.L. (Spain) info@emac.es // Emac America L.L.C. (FL,USA) [email protected] // Emac Italia S.R.L. (Italy) [email protected]
www.emac.es
The data provided are for information only and have been obtained by our supplier or Emac®.
Does not constitute legal guarantee in terms of properties and / or functionality of the application of material
Novorodapie® Eclipse
Cleaning and maintenance
Indoors Wall tiling Recyclable
Outdoors
The product must be cleaned periodically with a soft cloth. If you use a neutral liquid cleaner, you must
rinse the prole with cold water and dry it to remove the humidity excess. The persistent dirtiness can
be removed by using cleaning approved agents lightly abrasive or a grid covered with polished powder
neutral.
Steel wool, abrasive cleaners, souring products as well as strong acids (hydrochloric and
perchloric),strong bases (caustic soda or ammonia) or carbonated solutions are not recommended.
Citric acid is neither recommended because disolves the protective layer of the surface of aluminium.
Waxes, petrolatum, lanolin or similar substances are not appropriate. Solvents containing haloalkanes
(hydrouoroether and chlorinated solvents) and curing accelerators containing chlorides should not be
used (use special accelerators free of chlorides).
Page 3 of 3
  • Page 1 1
  • Page 2 2
  • Page 3 3

Emac NRECAL1570PL Guide d'installation

Taper
Guide d'installation
Ce manuel convient également à

dans d''autres langues