Samsung HL-T6176S Manuel utilisateur

Register your product at www.samsung.com/global/register

Record your Model and Serial number here for future reference.

▪ Model _______________ ▪ Serial No. _______________

Owner’s Instructions

HL-T5076S

HL-T5676S

HL-T6176S

DLP TV

BP68-00630B-Eng_1.indd 1 2007-04-05 ｿﾀﾀ・10:13:54

English - 2

A Guide to Digital TV

● What is Digital Television?

Digital television (DTV) is a new way of transmitting high quality video and audio to your TV set. Using DTV, broadcasters can

transmit high definition TV (HDTV) images, Dolby digital surround audio, and new services such as multicasting (transmitting

more than one program on the same TV channel) and datacasting. Several of these services can be combined into a single digital

broadcast.

Digital Television Services

● Digital Picture Quality

DTV programs are transmitted in two different formats. The first is Standard Definition Television (SDTV) and the second is High

Definition Television (HDTV).

● SDTV program formats include 480-line interlaced (480i) and 480-line progressive (480p) video. 480i programs are essentially

a digital version of our current analog TV programs, while the 480p format offers improved image detail over 480i. Some 480p

programs are broadcast in widescreen and are comparable to progressive-scan DVD movies in image quality.

● HDTV program formats include 1080-line interlaced (1080i) and 720-line progressive (720p). Both HDTV formats are always

broadcast in widescreen, and offer much higher picture quality than SDTV.

● Dolby Surround Sound

With DTV, you can listen to a variety of Dolby digital audio formats from Dolby Surround 2.0 to Dolby Digital 5.1 surround, using

your home audio system. Many HDTV programs are now broadcast with DD 5.1 soundtracks.

The product unit accompanying this user manual is licensed under certain intellectual property rights of certain third parties. In

particular, this product is licensed under the following US patents:

5,991,715, 5,740,317, 4,972,484, 5,214,678, 5,323,396, 5,539,829, 5,606,618, 5,530,655, 5,777,992, 6,289,308, 5,610,985,

5,481,643, 5,544,247, 5,960,037, 6,023,490, 5,878,080, and under US Published Patent Application No. 2001-44713-A1.

This license is limited to private non-commercial use by end-user consumers for licensed contents. No rights are granted for

commercial use. The license does not cover any product unit other than this product unit and the license does not extend to any

unlicensed product unit or process conforming to ISO/IEC 11172-3 or ISO/IEC 13818-3 used or sold in combination with this

product unit. The license only covers the use of this product unit to encode and/or decode audio files conforming to the ISO/IEC

11172-3 or ISO/IEC 13818-3. No rights are granted under this license for product features or functions that do not conform to the

ISO/IEC 11172-3 or ISO/IEC 13818-3.

U.S.A Only

Other countries

The product unit accompanying this user manual is licensed under certain intellectual property rights of certain third parties. This

license is limited to private non-commercial use by end-user consumers for licensed contents. No rights are granted for commercial

use. The license does not cover any product unit other than this product unit and the license does not extend to any unlicensed

product unit or process conforming to ISO/IEC 11172-3 or ISO/IEC 13818-3 used or sold in combination with this product unit. The

license only covers the use of this product unit to encode and/or decode audio files conforming to the ISO/IEC 11172-3 or ISO/IEC

13818-3. No rights are granted under this license for product features or functions that do not conform to the ISO/IEC 11172-3 or

ISO/IEC 13818-3.

BP68-00630B-Eng_1.indd 2 2007-04-05 ｿﾀﾀ・10:13:55

English - 3

Q&A

1. Is the antenna I use for existing TV reception good enough for DTV?

Over-the-air (OTA) digital TV broadcasting uses the same channels as analog TV and works well with many existing TV antennas.

However, DTV broadcast channel assignments are different than analog channels. You should find out whether your local DTV

broadcasts are on VHF (channels 2-13) or UHF (channels 14-69) to see if you need a different antenna.

If your DTV channels are on UHF and you already get good UHF reception, your present antenna may work fine. The same holds

true for VHF DTV reception. Note that in some markets, both VHF and UHF channels are used for DTV broadcasts.

You can find out the latest DTV channel assignments for your area by browsing selected Internet web sites such as www.titantv.

com, www.10000watts.com, and www.fcc.gov.

2. How difficult is it to receive DTV signals indoors?

This depends on whether your local DTV stations are running full power or not and how close your location is to the transmission

tower. DTV receivers do not require as much signal as analog TV receivers to produce high-quality images and sound.

Once the DTV signal level exceeds a certain threshold at the receiver, the digital video and audio data is decoded at the same

quality it was originally encoded for broadcast.

This is a big advantage for DTV over analog TV - there is no noise, ghosting, static, or scratchy audio.

3. How can I connect an antenna in my townhouse, co-operative apartment, condominium,

or apartment?

The Federal Communications Commission’s OTARD Rule (part of the Telecommunications Act of 1996) allows residents of

condominiums, townhouse, or members of neighborhood associations to put up outside antennas for reception of broadcast TV

signals as long as those antennas are not located in common areas and are no more than 12’ in height.

Residents of rental units (apartments, etc.) are not covered by the OTARD rules and will have to use indoor antennas to receive

DTV broadcasts. It is possible that the landlord of an apartment complex can provide broadcast DTV signals via a master TV

antenna system to each apartment.

4. Can I connect my DTV set-top receiver to my cable TV service?

Cable TV systems use a different method for transmitting digital TV programs that is currently incompatible with broadcast DTV set-

top receivers. So you will still need to use an outdoor or indoor antenna to receive OTA broadcast DTV programs.

The good news is that you won’t have to pay a monthly or per-program charge to watch OTA DTV and HDTV programs. They’re

free, unlike subscription satellite TV or premium cable TV. All you need is an antenna and a DTV set-top receiver to enjoy clear,

sharp widescreen images and high-quality audio.

BP68-00630B-Eng_1.indd 3 2007-04-05 ｿﾀﾀ・10:13:55

English - 4

GENERAL INFORMATION

■

Viewing Position .......................................................5

■

List of Features .........................................................5

■

Checking Parts .........................................................6

■

Viewing the Control Panel ........................................6

■

Viewing the Connection Panel .................................8

■

Remote Control ........................................................9

■

Installing Batteries in the Remote Control ..............10

CONNECTIONS

■

Connecting VHF and UHF Antennas ......................10

■

Connecting Cable TV ............................................. 11

■

Connecting a VCR ..................................................12

■

Connecting a Camcorder .......................................13

■

Connecting a DVD Player/Set-Top Box ..................13

■

Connecting a DVD Player/Set-Top Box via HDMI .. 14

■

Connecting a DVD Player/Set-Top Box via DVI .....14

■

Connecting a Digital Audio System ........................ 15

■

Connecting an Ampliﬁer/

DVD Home Theater - Analog ..................................

15

■

Connecting a PC ....................................................16

OPERATION

■

Turning the TV On and Off ..................................... 16

■

Plug & Play Feature ...............................................17

■

Changing Channels ................................................18

■

Adjusting the Volume ..............................................19

■

Viewing the Display ................................................19

■

Viewing the Menus .................................................19

■

Navigating Menus by Using the Menu Map ............20

■

Memorizing the Channels .......................................20

■

Setting Up Your Remote Control ............................21

■

To Select the Source ..............................................26

■

To Edit the Input Source Name ..............................26

PICTURE CONTROL

■

Using Automatic Picture Settings ........................... 27

■ Making Detailed Picture Settings

......................29

■

Changing the Screen Size ......................................30

■

Digital Noise Reduction ..........................................31

■

DNIe (Digital Natural Image engine) ......................31

■

Setting the Active Color ..........................................32

■

Setting the Color Gamut .........................................32

■

Adjusting the Screen Position ................................33

■ Freezing the Picture

............................................33

SOUND CONTROL

■

Using Automatic Sound Settings ............................33

■

Customizing the Sound ..........................................34

■

Setting the TruSurround XT ....................................35

■

Choosing a Multi-Channel Sound

(MTS) Track - Digital ..............................................

36

■

Choosing a Multi-Channel Sound

(MTS) Track - Analog .............................................

36

■

Automatic Volume Control ...................................... 37

■

Selecting the Internal Mute .....................................37

CHANNEL CONTROL

■

Clearing Scrambled Channels

- Digital ................... 38

■

Adding and Erasing Channels ................................38

■

Setting Your Favorite Channels ..............................39

■

Viewing the Channel Lists ......................................40

■

Labeling Channels - Analog ...................................40

■

Setting the Default Channel List Mode ................... 41

■

Fine Tuning Analog Channels - Analog .................. 41

■

Checking the Digital-Signal Strength - Digital ........42

■

LNA (Low Noise Ampliﬁer) ......................................42

FUNCTION DESCRIPTION

■

Selecting a Menu Language ...................................43

■

Setting the Time .....................................................43

■

Using the Game Mode ...........................................45

■

Using the 3D/Dual-View Function ..........................46

■

Using the V-Chip ....................................................46

■

Viewing Closed Captions

(On-Screen Text Messages) - Digital .....................

52

■

Viewing Closed Captions

(On-Screen Text Messages) -

Analog ....................53

■

Menu Transparency Level ......................................54

■

Setting the Blue Screen Mode ................................54

■

Adjusting the Melody Sound ...................................55

■

Using the Color Weakness Enhancement Feature

...55

■

Setting the Light Effect ...........................................56

■

Setting the HDMI Black Level .................................56

■

Setting the Film Mode - Analog .............................. 57

■

Setting the Function Help .......................................57

■

Upgrading the Software ..........................................58

PC DISPLAY

■

Using Your TV as a Computer (PC) Display .......... 59

■

Display Modes ........................................................60

■

Setting up the TV with your PC ..............................61

■

Changing the Picture Size (PC Mode) ...................63

■

Setting the Home Theater PC ................................63

WISELINK

■

Using the WISELINK Function ............................... 64

■

Using the WISELINK Mode ....................................65

■

Using the Photo (JPEG) List ..................................66

■

Using the Music (MP3) List ....................................71

■

Using the Setup Menu ............................................72

APPENDIX

■

Identifying Problems ...............................................73

■

Replacing the Lamp ...............................................74

■

Cleaning and Maintaining Your TV ......................... 75

■

Using Your TV in Another Country .......................... 75

■

Technical Speciﬁcations .........................................76

Symbols

☛ ➢

Press

Important

Note

One-Touch

Button

Contents

BP68-00630B-Eng_1.indd 4 2007-04-05 ｿﾀﾀ・10:13:56

English - 5

General Information

Viewing Position

To optimize your viewing comfort, please follow the guidelines below for viewing distance.

If viewing for an extended period of time, sit as far back from the screen as possible.

➢

When installing the product,

make sure to keep it

away from the wall (more

than 10cm / 4inches) for

ventilation purposes.

Poor ventilation may cause

an increase in the internal

temperature of the product,

resulting in a shortened

component life and

degraded performance.

< Top view> < Side view>

50˝ screen :

At least 5.9 feet

List of Features

Your TV is designed and engineered using the latest technology. It is a full-featured, high-performance unit that exceeds

industry standards. In addition, it has these special features:

● Easy-to-operate remote control

● Dynamic menus and Navigating menus by using the menu map

● Easy-to-use on-screen menu system you can access from the side panel or remote control

● Automatic timer to turn the TV on and off at any time you choose

● Adjustable picture and sound settings and the ability to memorize your favorite settings

● Automatic channel tuning for up to 181 channels

● A special filter to reduce or eliminate reception problems

● Fine tuning control for the sharpest picture possible

● A built-in multi-channel sound decoder for stereo and bilingual listening

● Built-in, dual channel speakers

● A special sleep timer

● Widescreen TV with adjustable image size

● Life-like clear images provided by DNle technology

● My Color Control mode to correspond with your color preference

● Color Weakness mode

● Digital Input jack

● Digital Audio Output (OPTICAL) jack

● Theater Game Mode

● Easy-to-use channel list menu.

● WISELINK enables you to view and play photo (JPEG) and audio files (MP3) through the TV’s WISELINK jack.

56˝ screen :

At least 6.6 feet

61˝ screen :

At least 7.2 feet

50˝ screen :

At least 5.9 feet

56˝ screen :

At least 6.6 feet

61˝ screen :

At least 7.2 feet

➢

For optimal picture

quality, do not place

components on top

of the TV.

BP68-00630B-Eng_1.indd 5 2007-04-05 ｿﾀﾀ・10:13:58

English - 6

Viewing the Control Panel

Buttons on the Lower-Right Part of the Panel

The buttons on the lower-right panel control your TV’s basic features, including the on-screen menu.

To use the more advanced features, you must use the remote control.

Checking Parts

Owner’s Instructions Remote Control

(BP59-00125A)/

AAA Batteries

Warranty Card/

Registration Card/

Safety Guide Manual/

Quick Guide Manual

Power Cord

(3903-000144A)

Cloth-Clean

➢

The product color and shape may vary depending on the model.

Continued...

Sold Separately

Replacement Lamp

For purchasing a replacement

lamp, ask at a nearby service

center.

• Use authorized lamps only.

The company cannot guarantee

the quality of the product if an

unauthorized lamp is used.

S-Video Cable Video Cable Antenna Cable

Component Cables

Audio Cables

D-Sub Cable PC Audio Cable HDMI/DVI Cable HDMI Cable Optical Cable

1Stereo/2RCA

Cable

BP68-00630B-Eng_1.indd 6 2007-04-05 ｿﾀﾀ・10:14:04

English - 7

1

SOURCE

Toggles between all the available input sources

(TV, AV1, AV2, S-Video1, S-Video2, Component1,

Component2, PC, HDMI1, HDMI2, or HDMI3/DVI).

2

MENU

Press to see an on-screen menu of your TV’s features.

3

+ VOL –

Press to increase or decrease the volume.

In the on-screen menu, use the + VOL – buttons as

you would use the ◄ and ► buttons on the remote

control.

4

CH

Press to change channels.

In the on-screen menu, use the CH buttons as

you would use the ▲ and ▼ buttons on the remote

control.

5

(ENTER)

Press to confirm a selection.

6

POWER

Press to turn the TV on and off.

7

Remote Control Sensor

Aim the remote control towards this spot on the TV.

8

Indicator Lights

Blinks and turns off when the power is on and lights up

in stand-by mode.

Indicator Light Key

( : On, : Blinking, : Off)

STAND BY/TEMP TIMER LAMP Indication

Standby state.

The picture will automatically appear in about 15 seconds.

Auto Timer ON/OFF has been set and the set will automatically be turned on in about 15 seconds.

A cooling fan inside the set is not operating normally.

Lamp cover on the side of the set is not properly shut.

Check if the ventilation hole on the side of the set is blocked, because if the inner temperature is too

high, the power will shut off.

Lamp may be defective. Please contact a certified technician.

➢

● It takes about 30 seconds for the TV to warm up, so normal brightness may not appear immediately.

● The TV has a fan to keep the inside lamp from overheating. You’ll occasionally hear it working.

➢

● You can use the channel selection buttons to switch on the TV when it is in standby mode depending on the model.

● When using the on-screen menu the volume adjustment and channel selection buttons have the same function as the

▲/▼/◄/► buttons on the remote control.

● If the remote control no longer works or you have lost it, you can use controls on the panel of the TV.

BP68-00630B-Eng_1.indd 7 2007-04-05 ｿﾀﾀ・10:14:08

English - 8

Viewing the Connection Panel

Side Panel Jacks

Use the side panel jacks to connect A/V components that will be connected continuously, such as VCR or DVD players.

For more information on connecting equipment, see pages 10~16.

➢

The product color and shape may vary depending on

the model.

1

ANT 1 IN (CABLE)/ANT 2 IN (AIR)

75Ω Coaxial connector for Air/Cable Network.

2

HDMI IN 1, HDMI IN 2

Connect to the HDMI jack of a device with HDMI output.

3

HDMI3/DVI IN

Connect to the HDMI jack of a device with HDMI output.

This input can also be used as a DVI connection with

separate analog audio inputs. An optional HDMI/DVI

cable will be necessary to make this connection.

When using an optional HDMI/DVI adapter, the DVI

analog audio inputs on your TV allow you to receive left

and right audio from your DVI device.

4

RS232C

For service only.

5

DIGITAL AUDIO OUT (OPTICAL)

Connect to a Digital Audio component.

6

DVI IN (AUDIO-L/R)

Connect to the DVI audio output jack of an external

device.

7

S-VIDEO (AV IN 1, 2)

Video input for external devices with an

S-Video output, such as a Camcorder or VCR.

8

3D SYNC OUT

Connect to 3D IR Emitter.

9

VIDEO/AUDIO-L/R (AV OUT)

Video/Audio outputs for external devices.

➢ Video output is not available in Component, PC, and

HDMI.

0

WISELINK

Connect an USB mass storage device to view photo files

(JPEG) and play audio files (MP3).

!

VIDEO/AUDIO-L/R (AV IN 1, 2)

Video input for external devices, such as a Camcorder or

VCR.

@

PC IN

Connect to the video output jack on your PC.

#

PC AUDIO IN

Connect to the audio output jack on your PC.

$

COMPONENT IN 1, 2

Video (Y/PB/PR) and audio (L-AUDIO-R) component

inputs.

%

POWER IN

Connect the supplied power cord.

BP68-00630B-Eng_1.indd 8 2007-04-05 ｿﾀﾀ・10:14:09

English - 9

Remote Control

You can use the remote control up to a distance of about 23 feet from the TV. When using the remote, always point it directly

at the TV. You can also use your remote control to operate your VCR, Cable box, DVD player, or Set-Top Box.

1

POWER

Turns the TV on and off.

2

Numeric Buttons

Press to directly select a channel.

3

–

Press to select additional channels

being broadcast by the same station.

For example, to select channel “54-3”,

press “54”, then press “–” and “3”.

4

CH LIST

Used to display Channel Lists on the

screen.

5

ANTENNA

Press to select “Air” or “Cable”.

6

VOL +, VOL –

Press to increase or decrease the

volume.

7

MUTE

Press to temporarily cut off the sound.

8

MENU

Displays the main on-screen menu.

9

RETURN

Returns to the previous menu.

0

S.MODE

Press to select the sound mode.

!

P.MODE

Press to select the picture mode.

@

FAV.CH

Press to switch to your favorite

channels.

#

GAME

Press to select the Theater Game

mode except for the TV mode.

$

MTS

Press to choose Stereo, Mono or

Separate Audio Program (SAP

broadcast).

%

3D

Press to select the 3D/Dual-View

mode.

^

SET

Sets the remote to control your TV,

VCR, Cable, DVD, or Set-Top Box.

&

TV, DVD, STB, CABLE, VCR

Press to operate your TV, DVD, STB,

CABLE (box), or VCR.

*

SOURCE

Press to display all of the available

video sources.

(

Press to activate the backlight of the

VOL, CH and the active source button

(TV, DVD, CABLE, STB, VCR) on the

remote control.

)

PRE-CH

Tunes to the previous channel.

a

WISELINK

This function enables you to view and

play photo (JPEG) and audio files

(MP3) from an external device.

(See page 66 (JPEG), 71 (MP3))

b

HDMI

Selects the HDMI mode directly.

c

VCR/DVD Functions

- Rewind

- Stop

- Play/Pause

- Fast Forward

d

CH , CH

Press to change channels.

e

EXIT

Press to exit from the menu.

f

UP▲/DOWN▼/LEFT◄/RIGHT►/

ENTER

Use to select on-screen menu items

and change menu values.

g

INFO

Press to display information on the TV

screen.

h

CAPTION

Controls the caption decoder.

i

STILL

Press to stop the action during a

particular scene.

Press again to resume normal video.

j

P.SIZE

Press to change the screen size.

k

Color buttons

Press to add or delete channels and to

store channels to the favorite channel

list in the Channel List menu.

(See pages 38~41)

l

ADD/DEL

Use to store and delete channels to/

from memory.

m

SRS

Selects SRS TruSurround XT mode.

n

SLEEP

Press to select a preset time interval

for automatic shut off.

o

RESET

When your remote control does not

work, change the batteries and press

the RESET button for 2-3 seconds

before use.

➢

The performance of the remote control may be affected by bright light.

➢

This is a special remote control for the visually impaired persons, and has Braille points on the POWER, Channel, Volume, STOP,

and PLAY/PAUSE buttons.

BP68-00630B-Eng_1.indd 9 2007-04-05 ｿﾀﾀ・10:14:12

English - 10

Installing Batteries in the Remote Control

1 Lift the cover at the back of the remote control upward as shown in the figure.

2 Install two AAA size batteries.

➢

● Make sure to match the “+” and “–” ends of the batteries with the diagram inside the

compartment.

● Do not mix battery types, i.e. alkaline and manganese.

3 Close the cover as shown in the figure.

➢

Remove the batteries and store them in a cool and dry place if you won’t be using the remote

control for a long time. The remote control can be used up to about 23 feet from the TV.

(Assuming typical TV usage, the batteries last for about one year.)

➢

If the remote control doesn’t work! Check the following

1. Is the TV power on?

2. Are the plus and minus ends of the batteries reversed?

3. Are the batteries drained?

4. Is there a power cut, or is the power cord unplugged?

5. Is there a special fluorescent light or a neon sign nearby?

Connections

Connecting VHF and UHF Antennas

If your antenna has a set of leads that look like this, see “Antennas with 300 Ω Flat Twin

Leads” below.

If your antenna has one lead that looks like this, see “Antennas with 75 Ω Round Leads”.

If you have two antennas, see “Separate VHF and UHF Antennas”.

Antennas with 300 Ω Flat Twin Leads

If you are using an off-air antenna (such as a roof antenna or “rabbit ears”) that has 300 Ω twin flat leads, follow the

directions below.

1 Place the wires from the twin leads under the screws on a 300-75 Ω adapter (not supplied).

Use a screwdriver to tighten the screws.

2 Plug the adaptor into the ANT 1 IN (CABLE) or ANT 2 IN (AIR) terminal on the side of the TV.

Antennas with 75 Ω Round Leads

1 Plug the antenna lead into the ANT 1 IN (CABLE) or ANT 2 IN (AIR) terminal on the side of the

TV.

Separate VHF and UHF Antennas

If you have two separate antennas for your TV (one VHF and one UHF), you must combine the two antenna signals before

connecting the antennas to the TV. This procedure requires an optional combiner-adaptor (available at most electronics

shops).

1 Connect both antenna leads to the combiner.

2 Plug the combiner into the ANT 1 IN (CABLE) or ANT 2 IN (AIR) terminal on the bottom of the

side panel.

BP68-00630B-Eng_1.indd 10 2007-04-05 ｿﾀﾀ・10:14:15

English - 11

Connecting Cable TV

To connect to a cable TV system, follow the instructions below.

Cable without a Cable Box

1 Plug the incoming cable into the ANT 1 IN (CABLE) terminal on the side of the TV.

➢

Because this TV is cable-ready, you do not need a cable box to view unscrambled cable

channels.

Connecting to a Cable Box that Descrambles All Channels

1 Find the cable that is connected to the ANT OUT terminal on your cable box.

➢

This terminal might be labeled “ANT OUT”, “VHF OUT” or simply, “OUT”.

2 Connect the other end of this cable to the ANT 1 IN (CABLE) terminal on the side of the TV.

Connecting to a Cable Box that Descrambles Some Channels

If your cable box descrambles only some channels (such as premium channels), follow the instructions below. You will need

a two-way splitter, an RF (A/B) switch, and four lengths of Antenna cable. (These items are available at most electronics

stores.)

1 Find and disconnect the cable that is connected

to the ANT IN terminal on your cable box.

➢

This terminal might be labeled “ANT IN”,

“VHF IN” or simply, “IN”.

2 Connect this cable to a two-way splitter.

3 Connect an Antenna cable between an OUTPUT

terminal on the splitter and the IN terminal on the

cable box.

4 Connect an Antenna cable between the ANT OUT

terminal on the cable box and the B–IN terminal

on the RF(A/B) switch.

5 Connect another cable between the other OUT

terminal on the splitter and the A–IN terminal on

the RF (A/B) switch.

6 Connect the last Antenna cable between the OUT

terminal on the RF (A/B) switch and the ANT 1 IN

(CABLE) terminal on the side of the TV.

After you have made this connection, set the A/B switch to the “A” position for normal viewing. Set the A/B switch to the “B” position to

view scrambled channels. (When you set the A/B switch to “B”, you will need to tune your TV to the cable box’s output channel, which

is usually channel 3 or 4.)

Splitter

Incoming

cable

Splitter

Cable Box

Incoming

cable

Splitter

Cable Box

RF (A/B)

Switch

Incoming

cable

Splitter

Cable Box

Incoming

cable

RF (A/B)

Switch

Incoming

cable

Splitter

Cable Box

RF (A/B)

Switch

TV Side

ANT OUT

ANT IN

BP68-00630B-Eng_1.indd 11 2007-04-05 ｿﾀﾀ・10:14:20

English - 12

Connecting a VCR

Video Connection

These instructions assume that you have already connected your TV to an antenna or a cable TV system (according to the

instructions on pages 10~11). Skip step 1 if you have not yet connected to an antenna or a cable system.

1 Unplug the cable or antenna from

the side of the TV

2 Connect the cable or antenna to

the ANT IN terminal on the side of

the VCR.

3 Connect an Antenna Cable

between the ANT OUT terminal

on the VCR and the ANT 1 IN

(CABLE) or ANT 2 IN (AIR)

terminal on the TV.

4 Connect a Video Cable between

the AV IN 1 [VIDEO] (or AV IN 2

[VIDEO]) jack on the TV and the

VIDEO OUT jack on the VCR.

5 Connect Audio Cables between the

AV IN 1 [L-AUDIO-R] (or AV IN 2

[L-AUDIO-R]) jacks on the TV and

the AUDIO OUT jacks on the VCR.

➢

If you have a “mono”

(non-stereo) VCR, use a

Y-connector (not supplied) to

hook up to the right and left

audio input jacks of the TV. If

your VCR is stereo, you must

connect two cables.

➢

Each VCR has a different side panel configuration.

➢

When connecting a VCR, match the color of the connection terminal to the cable.

S-Video Connection

Your Samsung TV can be connected

to the S-Video jack of a VCR.

(This connection delivers a better

picture when compared to the

regular video connection above.)

1 To begin, follow steps 1–3 in the

previous section to connect the

antenna or cable to your VCR and

your TV.

2 Connect an S-Video Cable

between the AV IN 1 [S-VIDEO] (or

AV IN 2 [S-VIDEO]) jack on the TV

and the S-VIDEO OUT jack on the

VCR.

3 Connect Audio Cables between the

AV IN 1 [L-AUDIO-R] (or AV IN 2

[L-AUDIO-R]) jacks on the TV and

the AUDIO OUT jacks on the VCR.

➢

Each VCR has a different side panel configuration.

➢

When connecting a VCR, match the color of the connection terminal to the cable.

➢

Some games may be displayed with a cut off picture when the TV is connected to a game player.

2

TV Side Panel

VCR

Audio Cable(Not supplied)5

Video Cable(Not supplied)4

Antenna cable(Not supplied)3

TV Side Panel

VCR

S-Video Cable(Not supplied)2

Antenna cable(Not supplied)1

1

Audio Cable (Not supplied)3

1

BP68-00630B-Eng_1.indd 12 2007-04-05 ｿﾀﾀ・10:14:24

English - 13

Connecting a Camcorder

The side panel jacks on your TV make it easy to connect a camcorder to your TV.

They allow you to view the camcorder tapes without using a VCR

1 Connect a Video Cable or

S-Video Cable between the AV

IN 1 [VIDEO] or [S-VIDEO] (or AV

IN 2 [VIDEO] or [S-VIDEO]) jack

on the TV and the VIDEO OUT

(or S-VIDEO OUT) jack on the

camcorder.

2 Connect Audio Cables between the

AV IN 1 [L-AUDIO-R] (or AV IN 2

[L-AUDIO-R]) jacks on the TV

and the AUDIO OUT jacks on the

camcorder.

➢

Each Camcorder has a different

side panel configuration.

➢

When connecting a Camcorder,

match the color of the connection

terminal to the cable.

Connecting a DVD Player/Set-Top Box

The side panel jacks on your TV make it easy to connect a DVD player/Set-Top Box.

1 Connect a Component Cables

between the COMPONENT IN 1

[Y, PB, PR] (or COMPONENT IN 2

[Y, PB, PR]) jacks on the TV and

the COMPONENT OUT [Y, PB, PR]

jacks on the DVD Player/Set-Top

Box.

2 Connect Audio Cables between the

COMPONENT IN 1 [L-AUDIO-R]

(or COMPONENT IN 2

[L-AUDIO-R]) jacks on the TV and

the AUDIO OUT jacks on the DVD

player/Set-Top Box.

➢

Component video separates the video into Y (Luminance (brightness), PB (Blue) and PR (Red) for enhanced video quality.

Be sure to match the component video and audio connections.

For example, if connecting the video cable to COMPONENT IN, connect the audio cable to COMPONENT IN also.

➢

Each DVD Player/Set-Top box has a different side panel configuration.

➢

When connecting a DVD Player/Set-Top box, match the color of the connection terminal to the cable.

TV Side Panel

Camcorder

S-Video Cable(Not supplied)

1

Video Cable(Not supplied)

1

Audio Cable(Not supplied)

2

or

TV Side Panel

DVD Player/Set-Top Box

Audio Cable(Not supplied)

2

Component Cable(Not supplied)

1

BP68-00630B-Eng_1.indd 13 2007-04-05 ｿﾀﾀ・10:14:31

English - 14

Connecting a DVD Player/Set-Top Box via DVI

This connection can only be made if there is a DVI Output jack on the external device.

1 Connect a HDMI/DVI Cable or

DVI-HDMI Adapter between the

HDMI3/DVI IN jack on the TV and

the DVI OUT jack on the DVD

Player/

Set-Top Box.

2 Connect Audio Cables between the

DVI IN [L-AUDIO-R] jacks on the

TV and the AUDIO OUT jacks on

the DVD Player/Set-Top Box.

➢

Each DVD Player/Set-Top box has

a different side panel configuration.

➢

When connecting a DVD Player/

Set-Top box, match the color of the

connection terminal to the cable.

Connecting a DVD Player/Set-Top Box via HDMI

This connection can only be made if there is an HDMI Output jack on the external device.

1 Connect an HDMI Cable between

the HDMI IN 1 (or HDMI IN 2) on

the TV and the HDMI OUT jack on

the DVD Player/Set-Top Box.

What is HDMI?

● HDMI, or high-definition multimedia interface, is a next-generation interface that enables the transmission of digital audio and video

signals using a single cable.

● “Multimedia interface” is a more accurate name for it especially because it allows multiple channels of digital audio (5.1 channels).

The difference between HDMI and DVI is that the HDMI device is smaller in size, has the HDCP (High Bandwidth Digital Copy

Protection) coding feature installed, and supports multi-channel digital audio.

➢

Each DVD Player/Set-top box has a different side panel configuration.

➢

When connecting a DVD Player/Set-top box, match the color of the connection terminal to the cable.

➢

When connecting via HDMI, you do not need to connect Audio Cables. You only need to connect Audio cables when connecting

via HDMI/DVI.

➢

The external devices that support lower versioned HDMI mode may not implement sound output for the TV with the latest HDMI

version (HDMI 1.3).

In this case, connect to HDMI3/DVI IN and DVI IN [R-AUDIO-L] on the side panel of the TV.

➢

Part of lower versioned HDMI cables may cause annoying flickers or no screen display.

In this case use the cable that supports the latest HDMI version (HDMI 1.3).

TV Side Panel

DVD Player/Set-Top Box

Audio Cable(Not supplied)

2

HDMI/DVI Cable(Not supplied)

1

HDMI Cable(Not supplied)

1

DVD Player/

Set-Top Box

TV Side Panel

BP68-00630B-Eng_1.indd 14 2007-04-05 ｿﾀﾀ・10:14:36

English - 15

Connecting a Digital Audio System

The side panel jacks on your TV make it easy to connect a Digital Audio System to your TV.

1 Connect an Optical Cable

between the DIGITAL AUDIO OUT

(OPTICAL) jack on the TV and

the Digital Audio Input jack on the

Digital Audio System.

When a Digital Audio System is

connected to the DIGITAL AUDIO

OUT (OPTICAL) terminal:

Decrease the volume of the TV,

and adjust the volume level with

the audio system’s volume control.

➢

Each Digital Audio System has a

different side panel configuration.

➢

5.1CH audio is possible when the

TV is connected to an external

device supporting 5.1CH.

What is OPTICAL?

● Converts the electric signal into an optical light signal, and transmits it through glass fibers. S/PDIF is a transmission system of

digital audio in the form of a light wave that uses a glass conductor.

Connecting an Amplifier/DVD Home Theater - Analog

1 Connect Audio Cables between

the AV OUT [L-AUDIO-R] jacks on

the TV and AUDIO IN [L-AUDIO-R]

jacks on the Amplifier/DVD Home

Theater.

When an audio amplifier is

connected to the AV OUT

[L-AUDIO-R] terminals: Decrease

the volume of the TV, and adjust

the volume level with the amplifier’s

volume control.

➢

Each Amplifier/DVD Home

Theater has a different side panel

configuration.

➢

When connecting an Amplifier/DVD

Home Theater, match the color

of the connection terminal to the

cable.

TV Side Panel

Optical Cable (Not supplied)

1

Digital Audio System

TV Side Panel

Audio Cable (Not supplied)

1

Amplifier/

DVD Home Theater

BP68-00630B-Eng_1.indd 15 2007-04-05 ｿﾀﾀ・10:14:39

English - 16

Connecting a PC

Using the D-Sub Cable

1 Connect a D-Sub Cable between

the PC IN [PC] jack on the TV

and the PC output jack on your

computer.

2 Connect a PC Audio Cable

between the PC IN [AUDIO] jack

on the TV and the Audio Out

jack of the sound card on your

computer.

Using the HDMI/DVI Cable

1 Connect a HDMI/DVI Cable

between the HDMI3/DVI IN jack on

the TV and the PC output jack on

your computer.

2 Connect a 1Stereo/2RCA Cable

between the DVI IN [L-AUDIO-R]

jack on the TV and the Audio Out

jack of the sound card on your

computer.

➢

Each PC has a different side panel configuration.

➢

When connecting a PC, match the color of the connection terminal to the cable.

Operation

Turning the TV On and Off

Press the POWER button on the remote control.

You can also use the POWER button on the TV.

➢

It may take a while when your TV starts.

TV Side Panel

PC

PC Audio Cable (Not supplied)

2

D-Sub Cable (Not supplied)

1

Using the D-Sub Cable

Using the HDMI/DVI Cable

TV Side Panel

PC

1Stereo/2RCA Cable (Not supplied)

2

HDMI/DVI Cable (Not supplied)

1

BP68-00630B-Eng_1.indd 16 2007-04-05 ｿﾀﾀ・10:14:44

English - 17

Plug & Play Feature

When the TV is initially powered on, basic settings proceed automatically and subsequently:

1 Press the POWER button on the remote control.

The message Menu language, Shop Mode, Channels and Time will be set. is

automatically displayed.

Press the ENTER button, then the message Select the language of the OSD. is

displayed.

2 Press the ◄ or ► button to select a language, then press the ENTER button.

3 Press the ◄ or ► button to select Shop or Home, then press the ENTER button.

➢

The default selection is Home.

➢

We recommend setting the TV to Home mode for the best picture in your home

environment.

➢

Shop mode is only intended for use in retail environments.

➢

If the unit is accidentally set to Shop mode and you want to return to Dynamic (Home)

mode, press the Volume button and then hold down the

MENU button for five seconds

on the TV panel.

4 Press the ◄ or ► button to memorize the channels of the selected connection, then press

the ENTER button.

➢

If the antenna is connected to ANT 1 IN (CABLE), select Cable and if it is connected

to ANT 2 IN (AIR), select Air.

➢

If both ANT 1 IN (CABLE) and ANT 2 IN (AIR) are connected, select the Air+Cable.

➢

In Cable mode, you can select the correct analog signal source among STD, HRC,

and IRC by pressing the ◄ or ► button, then press the ENTER button. If you have

Digital cable, select the signal source for both Analog and Digital.

Contact your local cable company to identify the type of cable system that exists in

your particular area.

5 The TV will begin memorizing all of the available channels.

After all the available channels are stored, the Auto program menu reappears.

Press the ENTER button when channel memorization is complete.

The message Set the Clock Mode. is displayed.

➢

To stop the search before it has finished, press the ENTER button with stop selected.

6 Press the ◄ or ► button to select Manual for setting the current time manually, then press

the ENTER button. The message Enter the current date and time. is displayed.

➢

If you select Auto, Set to daylight saving time. is displayed, then go to step 9.

(If you want to set the time automatically, skip to step 9.)

7 Press the ◄ or ► button to move to Month, Day, Year, Hour, or Min.

Set the date and time you want by pressing the ▲ or ▼ button, then press the ENTER

button.

➢

You can set the month, day, year, hour, and minute directly by pressing the number

buttons on the remote control.

8 The message Enjoy your watching. is displayed.

When you have finished, press the ENTER button.

➢

Even if the ENTER button is not pressed, the message will automatically disappear

after several seconds.

Continued...

Plug & Play

Select the antennas to memorize

Air Cable Air+Cable

Enter Skip

Plug & Play

Auto Program in Progress.

Cable 3

10%

Stop

Enter

Skip

Plug & Play

Selects the cable system.

Analog

Digital

STD HRC IRC

Enter Skip

Plug & Play

Set the Clock Mode.

Auto Manual

Enter Skip

Plug & Play

Enjoy your watching.

OK

Plug & Play

Select the language of the OSD.

English Español Français

Enter Skip

Plug & Play

Select Home Mode when installing this TV at

home.

Shop Home

Enter Skip

Plug & Play

Enter the current date and time.

Enter Skip

Month / Day / Year Hour / Min

--

/

--

/

---- --

:

--

▲

▼

Adjust

Plug & Play

Menu language, Shop Mode, Channels and Time

will be set.

Start

Enter

Exit

BP68-00630B-Eng_1.indd 17 2007-04-05 ｿﾀﾀ・10:14:52

English - 18

Setting the Clock Automatically

9 Press the ◄ or ► button to select Off or On, then the ENTER button.

The message Select the time zone in which you live. is displayed.

10 Press the ▲ or ▼ button to highlight the time zone for your local area (and to move the

highlight to the appropriate time zone on the map of the United States).

Press the ENTER button.

If clock is not automatically set, see pages 43~44 to set the clock.

11 The message Enjoy your watching. is displayed.

When you have finished, press the ENTER button.

➢

Even if the ENTER button is not pressed, the message will automatically disappear

after several seconds.

If you want to reset this feature...

1 Press the MENU button.

Press the ◄ or ► button to select Setup, then press the ENTER button.

2 Press the ▲ or ▼ button to select Plug & Play, then press the ENTER button.

For further details on setting up options, refer to the page 17.

➢

The Plug & Play feature is only available in the TV mode.

Changing Channels

Using the Channel Buttons

Press the CH or CH button to change channels.

➢

When you press the CH or CH button, the TV changes channels in sequence.

You will see all the channels that the TV has memorized. (The TV must have memorized at

least three channels). You will not see channels that were either erased or not memorized.

See page 21 to memorize channels.

Using the Number Buttons

Use the number buttons to quickly tune to any channel.

Press the number buttons to go directly to a channel.

For example, to select channel 27, press “2,” then “7.”

The TV will change channels when you press the second number.

Using the “

-

” Button

The “

-

” button is used to select stations that broadcast a digital signal.

For example, for Channel 7-1, press “7”, then “-”, and then “1”.

➢

HD indicates the TV is receiving a Digital High Definition signal.

SD indicates the TV is receiving a Standard Definition signal.

➢

For quick channel change, press the number buttons, then press the ENTER button.

Using the PRE-CH Button to select the Previous Channel

Press the PRE-CH button.

The TV will switch to the last channel viewed.

➢

To quickly switch between two channels that are far apart, tune to one channel, then use

the number button to select the second channel. Then use the PRE-CH button to quickly

alternate between them.

Plug & Play

Set to daylight saving time.

On Off

Enter Skip

Plug & Play

Enjoy your watching.

OK

Plug & Play

Select the time zone in which you live.

Enter Skip

Newfoundland

Atlantic

Eastern

Central

Mountain

Pacific

Alaska

Hawaii

BP68-00630B-Eng_1.indd 18 2007-04-05 ｿﾀﾀ・10:14:55

English - 19

Adjusting the Volume

Press the VOL + or VOL – button to increase or decrease the volume.

Using the Mute Button

At any time, you can cut off the sound using the MUTE button.

1 Press the MUTE button and the sound cuts off.

The word Mute is displayed on the screen.

2 To turn mute off, press the MUTE button again, or simply press the VOL + or VOL – button.

Viewing the Display

The display identifies the current channel and the status of certain audio-video settings.

Press the INFO button on the remote control.

Viewing the Menus

1 With the power on, press the MENU button.

The main menu will appear at the bottom of the screen.

There are seven menu groups: Picture, Sound, Channel, Setup, Input, Application,

and Menu Map.

2 Press the ◄ or ► button, then press the ENTER button to select an item you want in the

menu. Press the ▲/▼/◄/►/ENTER button to display, change, or use the selected items.

Select Return by pressing the ▲ or ▼ button, then press the ENTER button to return to the

previous menu.

Press the EXIT button to exit.

No Time Information

Air

3

Picture

Enter

Picture

Mode

Contrast

100

Brightness

45

Sharpness

75

Color

55

Tint

G50 R50

Color Tone

Detailed Settings

Size

Return

Dynamic

Cool1

16:9

Enter

Sets the picture options.

Picture

BP68-00630B-Eng_1.indd 19 2007-04-05 ｿﾀﾀ・10:15:00

English - 20

Memorizing the Channels

Your TV can memorize and store all of the available channels for both air and cable channels. After the available channels

are memorized, use the CH and CH button to scan through the channels. This eliminates the need to change channels

by entering the channel digits. There are three steps for memorizing channels: selecting a broadcast source, memorizing the

channels(automatic) and adding or deleting channels(manual).

Selecting the Video Signal-source

Before your television can begin memorizing the available channels, you must specify the type of signal source that is

connected to the TV(i.e. an air or a cable system).

1 Press the MENU button.

Press the ◄ or ► button to select Channel, then press the ENTER button.

Press the ▲ or ▼ button to select Antenna, then press the ENTER button.

2 Press the ▲ or ▼ button to select Air or Cable, then press the ENTER button.

Continued...

Navigating Menus by Using the Menu Map

Using the Menu Map of the main menu enables you to view all menus and select a function quickly.

You can select any menu by using the menu map.

1 Press the MENU button.

The main menu will appear at the bottom of the

screen.

2 Press the ◄ or ► button to select Menu Map,

then press the ENTER button. The menu map

will appear.

3 Press the ▲/▼/◄/► button to select a menu,

then press the ENTER button. The selected

menu will appear.

4 Press the ▲/▼/◄/►/ENTER buttons to display,

change, or use the selected items.

➢

Red button: Toggles between alphabetical order display and functional order display.

Green button: Moves to the previous page.

Yellow button: Moves to the next page.

ENTER button: Moves to the selected menu.

Press the EXIT button to exit.

Channel

Enter

Channel

Return

Antenna

Auto Program

Clear Scrambled Channel

Channel List

Fine Tune

Signal Strength

LNA

Air

On

Channel

Enter

Channel

Return

Antenna

Auto Program

Clear Scrambled Channel

Channel List

Fine Tune

Signal Strength

LNA

Cable

On

Air

Cable

Mode І Contrast І Brightness І Shapness І Color І Tint

Color Tone І Detailed Settings І Size І Digital NR І DNIe

Active Color І Color Gamut І Position І Reset

Alphabetical Order

Sound

Channel

Mode І SRS TruSurround XT І Preferred Language

Multi-Track Sound І Auto Volume І Internal Mute

Antenna І Auto Program І Clear Scrambled Channel І Channel List

Fine Tune І Signal Strength І LNA

Menu Map

1/2

Enter Return

Setup

Plug & Play І Language І Clock І Sleep Timer І Timer 1 І Timer 2

BP68-00630B-Eng_1.indd 20 2007-04-05 ｿﾀﾀ・10:15:05

La page charge ...

Samsung HL-T6176S Manuel utilisateur

Ce manuel convient également à

Samsung HL-T6176S Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents