Miele ScoutRX2 Le manuel du propriétaire

en Operating Instructions Robot Vacuum Cleaner

fr Mode d'emploi Aspirateur-robot

M.-Nr. 10 783 332

HS18

2

en ....................................................................................................................... 4

fr ......................................................................................................................... 37

en - Contents

3

IMPORTANT SAFETY INSTRUCTIONS ................................................................ 4

Appliance overview ............................................................................................. 10

Caring for the environment ................................................................................ 12

Functions and features of the robot vacuum cleaner...................................... 13

Included accessories .......................................................................................... 13

Preparing for use................................................................................................. 13

Use........................................................................................................................ 15

Scout RX2 App..................................................................................................... 20

Maintenance ........................................................................................................ 22

Purchasing accessories ........................................................................................ 22

Ordering the correct accessories.......................................................................... 22

Emptying the dust box .......................................................................................... 22

Cleaning the dust box ........................................................................................... 23

Cleaning the exhaust filter..................................................................................... 23

Cleaning the side brushes..................................................................................... 23

Cleaning the roller brush ....................................................................................... 24

Cleaning the dust box seals.................................................................................. 25

Replacing the dust box seal unit........................................................................... 25

Cleaning the front wheel........................................................................................ 26

Cleaning the sensors............................................................................................. 26

Changing the batteries in the remote control........................................................ 26

Replacing the rechargeable battery ...................................................................... 26

Storage................................................................................................................. 28

Cleaning and care ............................................................................................... 28

After sales service............................................................................................... 28

Contact in case of fault ......................................................................................... 28

Warranty ................................................................................................................ 28

Frequently Asked Questions ..............................................................................29

Fault messages.................................................................................................... 32

Copyright and licenses ....................................................................................... 34

Limited Warranty - Vacuum Cleaners USA ....................................................... 35

en - IMPORTANT SAFETY INSTRUCTIONS

4

READ ALL INSTRUCTIONS BEFORE USING THIS APPLI-

ANCE

This robot vacuum cleaner complies with all current local and na-

tional safety requirements. Inappropriate use can, however, lead to

personal injury and damage to property.

Please read the operating instructions before using the robot vac-

uum cleaner for the first time. They contain important information

on the safety, use, and maintenance of the robot vacuum cleaner.

This prevents both personal injury and damage to the appliance.

Keep these operating instructions in a safe place and pass them

on to any future user.

Switch the robot vacuum cleaner off before any maintenance work

and cleaning or if it is not going to be used for a longer period of

time. It should also be switched off when dealing with problems.

To do so, slide the switch I/0 on the side of the robot vacuum

cleaner to the 0 position. The same should be done if you notice

any unusual behavior with your robot vacuum cleaner.

Correct use

 This robot vacuum cleaner is intended for cleaning flooring in do-

mestic households and similar working and residential environments.

 The robot vacuum cleaner is not intended for outdoor use.

 The robot vacuum cleaner must only be used for domestic house-

hold purposes to vacuum dry floor surfaces. Any other usage, modi-

fication or alteration is not supported by the manufacturer and could

be dangerous.

 Persons which lack physical, sensory or mental abilities or experi-

ence with the machine should not use it without supervision or in-

struction by a responsible person.

en - IMPORTANT SAFETY INSTRUCTIONS

5

Safety with children

 Danger of suffocation! Ensure that any plastic wrappings, bags,

etc. are disposed of safely and kept out of the reach of children.

 Children must be kept away from the robot vacuum cleaner unless

they are constantly supervised.

 Please supervise children in the vicinity of the robot vacuum

cleaner and do not let them play with it.

 Keep the rechargeable battery and the batteries for the remote

control out of the reach of children.

WARNING

To reduce the risk of fire, electric shock or injury:

 Check the voltage rating of the vacuum cleaner before connecting

the power cord to an electrical outlet. Your power source should cor-

respond with the voltage rating plate located on the underside of the

vacuum. Use only household AC outlets. Never use DC power

sources. If you are not sure of your home’s voltage supply, consult a

qualified electrician. Connecting the vacuum cleaner to a higher volt-

age than indicated in these instructions may result in damage to the

vacuum cleaner or injury.

 To reduce the risk of electric shock, this appliance has a polarized

plug (one blade is wider than the other.) This plug will fit in a polar-

ized outlet only one way. If the plug does not fit fully in the outlet, re-

verse the plug. If it still does not fit, contact a qualified electrician to

install the proper outlet. Do not alter the plug in any way.

en - IMPORTANT SAFETY INSTRUCTIONS

6

Technical safety

 The robot vacuum cleaner operates at 14.4V.

It is classified as a class III appliance.

This appliance is supplied by a safety extra-low voltage (SELV)

power source where the voltage is low enough to protect users from

the risk of electrical shock. A Class II plug-in power supply is used

for supplying power to charge the robot vacuum cleaner.

 Before each use of the robot vacuum cleaner, check both the vac-

uum cleaner and all of the accessories supplied with it for any visible

signs of damage. Do not use a damaged appliance or component.

 The electrical outlet must be fitted with a 15A fuse.

 Compare the connection data on the data plate of the robot vac-

uum cleaner and the power supply (voltage and frequency) with that

of the mains electricity supply. This data must match exactly.

 Reliable and safe operation of this robot vacuum cleaner can only

be assured if the base station has been connected to the mains

electricity supply.

 While the vacuum cleaner is under warranty, repairs should only

be performed by a Miele-authorized service technician. Otherwise

the warranty will be void.

 Repairs should only be carried out by a Miele-authorized service

technician. Repairs and other work by unqualified persons can cause

considerable danger to users.

 Make sure that the power cord is not damaged, bent or twisted.

Do not place any heavy items on top of it.

 Do not let the robot vacuum cleaner travel over the power cord or

other cords.

 Only use the parts supplied for charging the rechargeable battery

(adapter, power unit and base station).

en - IMPORTANT SAFETY INSTRUCTIONS

7

 Batteries and rechargeable batteries will deplete over time. They

can then leak corrosive fluids. Avoid contact with the eyes and skin.

In the event of contact, rinse thoroughly with water and seek medical

advice.

 The robot vacuum cleaner is fitted with sensors to detect steps

and drops in height. Do not cover these sensors or the camera, and

ensure that the function of the sensors is not hindered by obstacles

while the cleaner is moving.

 Do not attach any adhesive labels to the front of the base station

as this conceals an infrared transmitter. Do not place any items in

front of it.

 Do not immerse the robot vacuum cleaner or the parts supplied in

water. Clean all parts with a dry or slightly damp cloth only.

 Do not drop the robot vacuum cleaner or any of the accessories

supplied with it. Items that have been dropped or damaged should

not be used for safety reasons.

 Miele can only guarantee the safety of the appliance when gen-

uine Miele replacement parts are used. Faulty components must only

be replaced with genuine Miele parts.

Proper use

 Do not use the robot vacuum cleaner without the dust box, pre-fil-

ter, and exhaust filter fitted.

 Remove all breakable or lightweight items from the floor and make

sure that the robot vacuum cleaner cannot become entangled in

cords, curtains, fringes, cables, or similar.

 Animals must be kept away from the robot vacuum cleaner. Do

not allow animals to stand or sit on the robot vacuum cleaner.

 Take the necessary precautions to ensure that the robot vacuum

cleaner cannot fall from high places such as balconies. Block access

to these places, e.g., by installing physical barriers.

en - IMPORTANT SAFETY INSTRUCTIONS

8

 Do not use the robot vacuum cleaner to vacuum up anything

which has been burning or is still glowing e.g. cigarettes, ashes or

coal, whether glowing or apparently extinguished. Do not use it in

the vicinity of a fireplace.

 Do not use the robot vacuum cleaner to vacuum up any water, liq-

uid or damp dirt. Wait until any freshly cleaned or shampooed car-

pets or floor coverings are completely dry before attempting to vac-

uum.

 Do not use the robot vacuum cleaner to vacuum toner dust. Toner,

such as that used in printers and photocopiers, can conduct elec-

tricity.

 Do not use the robot vacuum cleaner to vacuum up any in-

flammable or combustible liquids or gases and do not use it in areas

where such substances are stored.

 Do not sit or lie on the surface being cleaned while the robot vac-

uum cleaner is running. This is to prevent the risk of loosely fitting

clothes or long hair coming into contact with the roller brush or other

moving parts of the robot vacuum cleaner.

Caution: Be aware that the robot vacuum cleaner moves au-

tonomously. Exercise caution when walking in the area that the robot

vacuum cleaner is operating in, to avoid stepping on or tripping over

it.

Handling the rechargeable battery and remote control batteries:

 Please contact Miele Service before shipping the rechargeable

battery.

 Do not drop or throw the rechargeable battery. For safety reasons

do not continue to use a rechargeable battery which has been

dropped or damaged.

 Keep the rechargeable battery or the batteries away from flames

or other heat sources. Do not heat the rechargeable battery or bat-

teries or place them in direct sunlight.

en - IMPORTANT SAFETY INSTRUCTIONS

9

 Do not dismantle the rechargeable battery.

 Do not cause a short circuit by bridging the contacts of the

rechargeable battery or the batteries, either unintentionally or delib-

erately.

 Do not allow the rechargeable battery or the batteries to come

into contact with liquids.

 Do not attempt to recharge the remote control batteries.

 Discontinue use of the rechargeable battery if you notice an un-

usual smell from it, if liquid is leaking from it, it is significantly over-

heating or if it is discolored or deformed. Dispose of the recharge-

able battery immediately.

 Disposing of the batteries and the rechargeable battery: Remove

the rechargeable battery from the robot vacuum cleaner and the bat-

teries from the remote control. Insulate the metal contacts with ad-

hesive tape to prevent short circuits. Dispose of the batteries and the

rechargeable battery in a municipal recycling facility. Do not dispose

of batteries or the rechargeable battery with normal household

waste.

Accessories

 Only use genuine accessories with the “ORIGINAL Miele” logo on

them. The manufacturer cannot otherwise guarantee the safety of

the product.

California Proposition 65

THE FOLLOWING WARNING IS REQUIRED BY THE STATE OF CALIFORNIA

FOR CALIFORNIA RESIDENTS ONLY:

 WARNING:

Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

SAVE THESE INSTRUCTIONS

en - Appliance overview

10

Illustrations A, B and C for this section are on the pull-out pages in the back of

these operating instructions.

A – Robot vacuum cleaner top and bottom

a

Display

b

Wi-Fi display

c

Video function display (for Scout RX2 Home Vision)

d

Time mode display (am/pm)

e

Start/Pause sensor field ()

f

Cameras

g

Impact protection

h

On/Off switch (I/0)

i

Depression to open the storage compartment

j

Silent vacuuming mode sensor field

k

Turbo vacuuming mode sensor field

l

Base sensor field

m

Spot vacuuming mode sensor field

n

Auto standard vacuuming mode sensor field

o

Timer indicator

p

Rechargeable battery status indicator

q

Side brushes for hard flooring / universal side brushes / side brushes for car-

peted flooring and rugs

r

Roller brush

s

Front wheel

t

Sensors (toppling protection)

u

Charging contacts

v

Roller brush cover

w

Drive wheels

x

Suction nozzle with sealed unit

y

Back wheel

en - Appliance overview

11

B – Base station and remote control

Base station

a

Cord rewind

b

Cord guides

c

Socket for the power supply plug (not visible in the figure)

d

Charging contacts

Remote control

a

Power button (switch on and off)

b

Base button (direct vacuum cleaner to base station)

c

OK confirmation button with direction buttons around it

d

Start/Pause button () (start/stop vacuuming)

e

Mode button (select the vacuuming mode)

f

WIFI button (activate/deactivate Wi-Fi)

g

Clock button (set time of day)

h

Timer button (set the timer)

i

Mute button (activate/deactivate acoustic signals)

j

Climb button (reduce crossing over height)

k

Battery compartment (at the back)

C – Dust box

a

Handle

b

Cleaning tool with wiper

c

Wiper button

d

Lid

e

Release buttons for the lid

f

Dust compartment

g

Pre-filter

h

Exhaust filter

i

Exhaust filter compartment lid

en - Caring for the environment

12

Disposal of the packing mate-

rial

The cardboard box and packing materi-

als protect the appliance during ship-

ping. They have been designed to be

biodegradable and recyclable.

Ensure that any plastic wrappings,

bags, etc. are disposed of safely and

kept out of the reach of children. Dan-

ger of suffocation!

Disposal of your old appliance

Electrical and electronic appliances

contain valuable materials. They also

contain certain substances, compounds

and components which were essential

for the proper functioning and safe use

of the equipment. Handling these mate-

rials improperly by disposing of them in

your household waste can be harmful to

your health and the environment. There-

fore, please do not dispose of your old

appliance with regular household waste

and follow local regulations on proper

disposal.

Consult with local authorities, dealers or

Miele in order to dispose of and recycle

electrical and electronic appliances.

Miele assumes no responsibility for

deleting any personal data left on the

appliance being disposed. Please en-

sure that your old appliance is kept

away from children until removal. Ob-

serve safety requirements for appli-

ances that may tip over or pose an en-

trapment hazard.

Disposal of old batteries and

power packs

Electrical and electronic appliances of-

ten contain batteries and power packs

which must not go into household

waste after use. Please remove all ac-

cessible batteries and take them to a

suitable collection site where they can

be collected free of charge. Batteries

and power packs may contain sub-

stances which are harmful to your

health and the environment.

The labeling on the battery or power

pack gives further information. The

crossed-out waste bin means that you

must never put batteries and power

packs into household waste. If the

crossed-out waste bin has one or more

of the listed chemical symbols, it con-

tains lead (Pb), cadmium (Cd) and/or

mercury (Hg).

3E&G+J

Old batteries and power packs contain

important raw materials and can be re-

cycled. Separately collecting old batter-

ies and power packs facilitates handling

and recycling.

en-US

13

Functions and features of the

robot vacuum cleaner

The robot vacuum cleaner is suitable for

the daily cleaning of short pile carpets

and fitted carpets, as well as hard floor-

ing.

Please observe the flooring manu-

facturer's cleaning and care instruc-

tions.

The robot vacuum cleaner is fitted with

cameras and sensors. It continually

saves room plans as well as information

regarding areas it can access freely.

The robot vacuum cleaner uses this

data to create an efficient vacuuming

plan of the surfaces to be vacuumed,

which it can then vacuum au-

tonomously.

Included accessories

– Remote control / two batteries

– Two side brushes

– Power supply unit with plug

– Power adapter

– Base station

– Magnetic strip

Preparing for use

Diagrams 1 - 10 for this section are at

the end of these operating instruc-

tions.

Insert the side brushes(Fig. 01)

 Place the robot vacuum cleaner up-

side down on a level, clean surface.

 Press the two side brushes carefully

onto their pins until they audibly en-

gage. Take care to comply with the

markings L and R.

Removing the protective foil(Fig. 02)

 Remove the protective foil from the

base station and from the top of the

robot vacuum cleaner.

Placing the batteries in the remote

control(Fig. 03)

 Remove the battery compartment

cover.

 Insert the two batteries supplied.

Make sure the polarity is correct.

 Close the battery compartment cover.

Switching on the robot vacuum

cleaner(Fig. 04)

 Slide the I/0 switch on the side of the

robot vacuum cleaner to the I posi-

tion.

The rechargeable battery status indica-

tor lights up in the display.

After approx. 60 seconds, the robot

vacuum cleaner will switch into

standby. The battery status indicator

will continue to light up.

The robot vacuum cleaner is reactivated

by pressing any button on the remote

control or one of the sensor fields in the

display.

en-US

14

Connecting the base station

(Figs. 05 - 07)

 Place the base station on a level sur-

face against a free wall within easy

access of a power socket. Ensure

that there is an obstacle-free distance

of at least 5ft in front and 1.5ft to the

right and left of the base station (Fig.

05).

 Insert the supplied power supply plug

into the socket at the back of the

base station. You can wind excess

cord around the cord rewind. Guide

the cord through one of the two cord

guides(Fig. 06).

 Insert the power adapter into the

power supply until it audibly engages

and then plug it into the selected

power outlet (Fig. 07).

Charging the rechargeable

battery(Fig. 08)

The rechargeable battery is supplied

not fully charged. Before using for the

first time, it must be fully charged while

the robot vacuum cleaner is switched

on (switch I/0 to I).

The battery can also be charged when

the robot vacuum cleaner is switched

off (switch I/0 to 0). In this case, the

vacuum cleaner indicators will not re-

act.

 Connect the robot vacuum cleaner

correctly to the charging contacts on

the connected base station.

As the rechargeable battery charges,

the status indicator flashes in the dis-

play.

The charging process takes up to

150minutes for the Scout RX2 and up

to 180minutes for the Scout RX2 Home

Vision. The process is finished when the

rechargeable battery status indicator

lights up green permanently in the dis-

play.

You can then vacuum for up to one

hour with the Scout RX2 and up to two

hours with the Scout RX2 Home Vision.

Rechargeable battery status indica-

tor in the display

Red Charged capacity approx.

0% - 20%

Orange Charged capacity approx.

20% - 50%

Green Charged capacity approx.

50% - 100%

Setting the time of day(Fig. 09)

Use the remote control to set the time

of day.

The default factory setting for the robot

vacuum cleaner is the 24-hour time dis-

play.

 Press the Clock button for at least

three seconds.

The indicator field flashes in the display.

 Press the OK button.

The hour display flashes in the indicator

field.

 Press the + or - direction button to

set the current hour.

 Press the OK button to confirm your

selection.

The minute display flashes in the indica-

tor field.

en-US

15

 Press the + or - direction button to

set the current minutes.

 Press the OK button to confirm your

selection.

If you want to alter the time of day, pro-

ceed as described above.

Defining the area to be vacuumed

(Fig. 10)

 The robot vacuum cleaner is 3

3/8“ high. Any items that will be vac-

uumed under should have a mini-

mum clearance of 3 7/16”.

You can define any areas which the ro-

bot vacuum cleaner should not have

access to.

 Place the magnetic strip supplied

with the groove facing downwards on

the floor.

The robot vacuum cleaner will not cross

over the magnetic strip.

Adhesive strips are supplied for perma-

nent fixing. Additional magnetic strips

are available to order from the Miele

webstore.

Use

 Always observe the robot vac-

uum cleaner during the first cleaning

session in a new environment and af-

ter making changes in your home.

This way you will be able to detect

and remove any problematic obsta-

cles or section off the relevant areas

with the magnetic strip. You must

also check whether steps and drops

in height are recognized properly.

Your robot vacuum cleaner is equipped

with an integrated Wi-Fi module. You

can view status information or execute

control commands using a mobile de-

vice (tablet PC or smartphone).

If you would like to control the robot

vacuum cleaner using a mobile device,

please read the section “Scout RX2

App”.

The operation of the robot vacuum

cleaner via remote control and the dis-

play will be described later in this “Use”

section.

Switching on and off

 Press the Power button on the re-

mote control or any sensor field on

the display.

Starting vacuuming

There are two ways to start vacuuming.

Option 1 (remote control)

 Press the  button.

Option 2 (display)

 Press the  sensor field.

The area to be vacuumed will be

cleaned.

en-US

16

The robot vacuum cleaner always

cleans for at least five minutes, regard-

less of the size of the surface to be vac-

uumed.

Finishing vacuuming if vacuuming

started from the base station

The robot vacuum cleaner will return to

the base station and recharge.

If the battery is low, the robot vacuum

cleaner will return to the base station

and recharge. IIwill appear in the indi-

cator field. The robot vacuum cleaner

will then continue vacuuming in the lo-

cation where it had stopped.

Finish vacuuming if vacuuming

started from somewhere in the room

The robot vacuum cleaner will return to

its starting point and switch into

standby after approx. 60seconds.

The robot vacuum cleaner will stand

still when there is low battery capacity.

You should then recharge it.

Manually controlled vacuuming

You can use the direction buttons on

the remote control to vacuum a particu-

lar area of the room.

 While the robot vacuum cleaner is

vacuuming, press and hold one of the

direction buttons.

The robot vacuum cleaner will turn in

the desired direction until you let go of

the direction button.

 Press and hold the + direction button.

The robot vacuum cleaner will travel in

the desired direction and continue to

vacuum.

 Press the  button on the remote

control or the  sensor field on the

display.

The original vacuuming process will

continue running.

Interrupting vacuuming

 Press the  button on the remote

control or the  sensor field on the

display.

The robot vacuum cleaner stops.

Press the button or the sensor field

again to continue vacuuming.

Manual navigation (without vacuum-

ing)

You can use the direction buttons on

the remote control to direct the robot

vacuum cleaner to a specific area of the

room.

en-US

17

 Press and hold one of the direction

buttons.

The robot vacuum cleaner will travel in

the desired direction without vacuum-

ing.

You cannot direct the robot vacuum

cleaner manually to the base station in

order to recharge it.

Directing the robot vacuum cleaner

to the base station

(only possible when vacuuming was

started from the base station)

 Press the Base button on the remote

control or the Base sensor field on

the display.

The robot vacuum cleaner will travel to

the base station and recharge.

Finishing vacuuming manually

 Press the Power button on the re-

mote control.

The robot vacuum cleaner will switch

into standby after approx. 60seconds.

The display is deactivated, the

rechargeable battery status indicator

continues to light up.

You can switch the robot vacuum

cleaner into standby before 60sec-

onds is up by pressing the Power but-

ton again.

The robot vacuum cleaner is reactivated

by pressing any button on the remote

control or one of the sensor fields in the

display.

Operating modes

There are five different operating op-

tions.

Auto

Standard vacuuming for

normally soiled flooring.

Spot Targeted vacuuming of an

area approx. 59' x 59'

(1.8x1.8m) around the se-

lected starting point of the

robot vacuum cleaner.

Base

Directing the robot vacuum

cleaner to the base station.

Turbo

For vacuuming lightly soiled

flooring with a short vacu-

uming duration.

Silent

Vacuuming with low noise

development.

en-US

18

Selecting the vacuuming mode

 Press the Power button on the re-

mote control.

There are two ways of selecting the

vacuuming mode.

Option 1 (remote control)

 Press the Mode button repeatedly

until the symbol for the vacuuming

mode you want lights up on the dis-

play.

 Press the  button to start vacuum-

ing.

Option 2 (display)

 Press the sensor field of the desired

vacuuming mode.

 Press the sensor field  in order to

start vacuuming.

Setting the timer

(only possible if the clock has been set)

If you would like the robot vacuum

cleaner to start at the same time every

day, you can save the desired start time

and vacuuming mode to memory.

The robot vacuum cleaner can also

vacuum in the dark. However, please be

aware that vacuuming may be less thor-

ough. The cameras require light in order

to navigate unobstructed.

Use the remote control to set the timer.

 Press the Timer button for at least

three seconds.

The timer  indicator flashes in the dis-

play and the hour display flashes in the

indicator field.

 Press the + or - direction button to

set the hour you want.

 Press the OK button to confirm your

selection.

The timer  indicator flashes in the dis-

play and the minute display flashes in

the indicator field.

en-US

19

 Press the + or - direction button to

set the minutes you want.

 Press the OK button to confirm your

selection.

 Press the Mode button repeatedly

until the symbol for the vacuuming

mode you want flashes on the dis-

play.

 Press the OK button to confirm your

selection.

The settings are shown for approx.

three seconds on the display. The robot

vacuum cleaner will now start to vac-

uum at the same time each day.

If the timer  indicator is lit up in the

display, then the timer is activated.

To alter the entries, proceed as de-

scribed above.

Tip: You can save up to seven individ-

ual combinations for the “start time –

vacuuming mode” if you set the timer

using a mobile device, see section

“Scout RX2 App”.

Please note that the robot vacuum

cleaner always follows the save com-

mands which were set most recently,

regardless of whether the settings

were configured using the remote con-

trol or with a mobile device.

Deactivating the timer

 Press the Timer button on the remote

control briefly.

The timer  indicator goes out on the

display.

Activating the timer / displaying a set

start time

 Press the Timer button on the remote

control briefly.

The timer  indicator lights up in the

display and the set start time is shown

briefly in the indicator field. The robot

vacuum cleaner will start to vacuum at

the set time.

Deactivating the acoustic signals

Acoustic signals are set as standard.

You can deactivate and then reactivate

them.

en-US

20

 Press the Mute button on the remote

control briefly.

OFF will appear in the indicator field

briefly.

Acoustic signals for fault messages

cannot be deactivated.

Reducing the maximum crossing

over height

The robot vacuum cleaner is set to

overcome height differences of up to

3/4" as standard. It is therefore able to

vacuum carpets, move over door

thresholds, etc.

If you would like to reduce this height

(down to approx. 1/4" (6mm)) in order

to protect the legs of chairs, tables, or

lamps, for example, you can deactivate

the factory default setting.

 Press the Climb button on the remote

control briefly.

LOwill appear in the indicator field.

Press the Climb button again briefly if

you want to reactivate the maximum

crossing over height of 3/4". HIwill ap-

pear in the indicator field.

Scout RX2 App

Wi-Fi

You can view status information or exe-

cute control commands using a mobile

device (tablet PC or smartphone).

The robot vacuum cleaner is equipped

with an integrated Wi-Fi module for this

purpose.

Please note that, despite the manufac-

turer's extremely high security stan-

dards, there may be data security

risks for the user whenever networked

devices are used. For this reason, we

offer you the option of removing the

Wi-Fi module from the robot vacuum

cleaner. You can find instructions for

this at the end of this section.

Make sure that you have sufficient sig-

nal strength for your W-Fi network in

the rooms where the robot vacuum

cleaner will be vacuuming.

You can download the Scout RX2 app

for free via the Apple App Store or

Google Play.

 Download the app from one of the

app stores.

La page charge ...

Miele ScoutRX2 Le manuel du propriétaire

Ce manuel convient également à

Miele ScoutRX2 Le manuel du propriétaire

dans d''autres langues

Documents connexes

Autres documents