T108 - IB (English/French)
Size: 297mm x 210mm
Color: Black
Material: 85gsm Wood free paper
Aug. 09, 2022
Model: T108
Cordless Alarm Clock
with Jumbo Display
T108
_
IS-080922-A Printed in China
IMPORTANT SAFETY INSTRUCTIONS
Please heed all warnings, read and follow all instructions and keep these instructions handy for future reference.
1. Do not use this product near water.
2. Clean only with damp cloth. Stronger cleaning agents, such as Benzene, thinner or similar materials can damage the
surface of the unit.
3. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
4. Heat – This product should be situated away from heat sources such as radiators, heat registers, stoves or other appliances
(including amplifiers) that produce heat.
5. Only use attachments/accessories specified by the manufacturer.
6. Damage Requiring Service – This product should be serviced by qualified service personnel when:
- Objects have fallen into or liquid has been spilled into the enclosure.
- The unit has been exposed to rain. The unit has been dropped or the enclosure damaged.
- The unit exhibits a marked change in performance or does not operate normally.
7. No naked flame sources, such as lighted candles, should be placed on this product.
8. Attention should be drawn to the environmental aspects of battery disposal. Many electronics retailers now recycle
batteries and other electronic components at no charge. To find a drop-o location near you, visit
www.call2recycle.com
9. This product is suitable for use in tropical and/or moderate climates.
WARNING:
- To reduce the risk of fire or electric shock, do not expose this product to rain or moisture.
- Do not dispose of batteries in the household trash or fire.
Battery Cautions and Tips
• Caution – Risk of explosion if the battery is replaced by an incorrect type.
• Only use the recommended/supplied batteries or equivalent.
• Use alkaline batteries for longer life.
• Do not mix old and new batteries, and do not mix alkaline, carbon-zinc or rechargeable nickel-cadmium batteries.
• Insert batteries with proper polarity (+/–) as indicated.
• Remove exhausted batteries from product.
• Do not attempt to recharge non-rechargeable batteries.
• Do not open batteries or heat them beyond normal ambient temperatures.
• To prevent battery leakage or damage, remove batteries from a product if it will not be used for a month or longer.
• Use extreme caution handling leaking batteries (avoid direct contact with eyes and skin). If battery leakage comes in
contact with eyes, IMMEDIATELY flush the eye with lukewarm and gently flowing water for at least 30 minutes. If skin
contact occurs, wash skin with clean water for at least 15 minutes. Seek medical attention if any symptoms occur.
• Store in cool, dry, ventilated area away from hazardous or combustible material.
• Follow applicable laws and local regulations for the disposal and transportation of batteries.
FCC Information
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference
that may cause undesired operation.
• Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s
authority to operate the equipment.
•
Note: This equipment has been tested and found to comply with the limit for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment
o and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
ISED Information
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development
Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:
(1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause
undesired operation of the device.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to
operate the equipment.
L’émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d’Innovation, Sciences et
Développement économique Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux
conditions suivantes : 1) L’appareil ne doit pas produire de brouillage; 2) L’appareil doit accepter tout brouillage radioélectrique subi,
même si le brouillage est susceptible d’en compromettre le fonctionnement.
Tout changement ou modification non expressément approuvé par la partie responsable de la conformité pourrait annuler le droit de
l'utilisateur à utiliser l'équipement.
CAN ICES-3 (B) / NMB-3(B) © 2022 SDI Technologies, Inc. All rights reserved
Questions? Visit www.timexaudio.com
TIMEX trademark owned by Timex Group USA, Inc. in the US and other countries
ALARM ON
12/24
YEAR
HOUR
MONTH
MIN/DATE
˚C/˚F
ALARM OFF
DATE SET
TIME SET
LOCK
ON OFF
ALARM SET
AMBIENT
LIGHT SENSOR
Setting the Time
• Slide ‘Function selection switch’ to the ‘TIME SET’ position.
• Press the ‘HOUR’ and ‘MIN/DATE’ buttons to adjust the clock to your desired time.
• Once desired time is reached slide the ‘Function selection switch’ to the ‘LOCK’ position.
NOTE: If you are using the 12 hour clock, be sure to check the AM/PM indicator to make sure you are setting the clock for the right
time of day.
Setting the Date
• Slide ‘Function selection switch’ to the ‘DATE SET’ position.
• Press the ‘YEAR’, ‘MONTH’, and ‘MIN/DATE’ buttons to adjust the clock to your desired date.
• Once desired date is reached slide the ‘Function selection switch’ to the ‘LOCK’ position.
12/24 Hour Display Settings
• Press the ‘12/24’ button to toggle between 12 hour and 24 hour clock.
• When you are in the 12 hour mode the AM/PM indicator will appears to the left of the display.
NOTE: Make sure ‘Function selection switch” is in the ’LOCK’ position prior to pressing ‘12/24’ button.
Setting the Alarm
• Slide “Function selection switch” to the ‘ALARM SET’ position.
• Press the ‘HOUR’ and ‘MIN/DATE’ buttons to adjust the clock to your desired wake time.
• Once desired wake time is reached slide the ‘Function selection switch’ to the ‘LOCK’ position.
NOTE: If you are using the 12 hour clock, be sure to check the AM/PM indicator to make sure you are setting the alarm for the right
time of day.
Turning Alarm On and O
• Slide ‘Alarm On/O Switch’ to turn the alarm on and o. Alarm indicator will appear when alarm is turned on.
• When ‘Alarm On/O Switch’ is in the ‘ALARM ON’ position the alarm will sound at desired time.
• Alarm will sound for 60 seconds or until snooze button is pressed or alarm is turned o.
• To turn alarm o slide ‘Alarm On/O Switch’ to the ‘ALARM OFF’ position.
Snooze/Light Button
• When the alarm sound is ringing, press the ‘SNOOZE/LIGHT’ button to snooze the device for 5 minutes.
• Snooze indicator will flash when snooze is triggered.
• Press the ‘SNOOZE/LIGHT’ button at anytime to activate the backlight.
Light Sensor Switch
• When in a dark room the display on the unit will automatically light up so the time can be read in the dark. To turn this
feature o slide the ‘Ambient light sensor switch’ to the ‘OFF’ position.
Maintenance
• Place the unit on a level surface away from sources of direct sunlight or excessive heat.
• Protect your furniture when placing your unit on a natural wood and lacquered finish. A cloth or other protective material
should be placed between it and the furniture.
Top Panel Back Panel
Function selection switch
Ambient light sensor
switch
Adjust minute/date
Select Fahrenheit/Celsius
Alarm On/O switch
Snooze/Light Button
Display Icons
AM/PM
Indicator Unit of Temperature
Indicator
Alarm Indicator
Snooze Indicator
AM/PM Indicator
for Alarm
Adjust hour/
month
Adjust the year/
hour conversion
Installing the Batteries
ALARM ON
12/24
YEAR
HOUR
MONTH
MIN/DATE
˚C/˚F
ALARM OFF
DATE SET
TIME SET
LOCK
ON OFF
ALARM SET
AMBIENT
LIGHT SENSOR
AAA 1.5V
AAA 1.5VAAA 1.5V
Setting the Unit of Temperature
• Device will come automatically set to Celsius.
• Press the ‘˚C/˚F’ button to toggle between Celsius and Fahrenheit.
NOTE: Make sure ‘Function selection switch” is in the ’LOCK’ position prior to pressing ‘˚C/˚F’ button.
MIN/DATE
˚C/˚F
• Press in and push down on the battery door to
open and remove the battery door.
• Install 3 new “AAA” batteries, matching the (+/-)
markings in the battery compartment.
• Replace the door.
-
1
dans d''autres langues
- English: Timex T108 User manual
Autres documents
-
LA CROSS TECHNOLOGY WS-9037U-IT Manuel utilisateur
-
Oregon Scientific BAR913 Le manuel du propriétaire
-
Audiovox CE710CR Manuel utilisateur
-
TFA Digital Radio-Controlled Alarm Clock with Temperature LUMIO PLUS Manuel utilisateur
-
Magnasonic CR61W Manuel utilisateur
-
Bresser 5-in-1 Comfort Weather Center Le manuel du propriétaire
-
Oregon Scientific EW92 Manuel utilisateur
-
La Crosse Technology BBB86118v3 Curved Digital Atomic Wall Clock Mode d'emploi
-
TEAC SR-L70i Manuel utilisateur
