Lorex LW2220 Manuel utilisateur
- Catégorie
- Équipement musical supplémentaire
- Taper
- Manuel utilisateur
Ce manuel convient également à
Thank you for purchasing this product.
This manual refers to the following models:
• LW2220
To learn more about this product and to learn about our complete range of accessory
products, please visit our website at:
www.lorextechnology.com
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RICK OF ELECTRIC SHOCK DO NOT
REMOVE COVER. NO USER SERVICABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrowhead symbol, within an equilateral
triangle, is intended to alert the user to the presence of uninsulated
"dangerous voltage" within the products ' enclosure that may be of
sufficient magnitude to constitute a risk of electric shock.
The exclamation point within an equilateral triangle is intended to
alert the user to the presence of important operating and
maintenance (servicing) instructions in the literature accompanying
the appliance.
WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT
EXPOSE THIS UNIT TO RAIN OR MOISTURE.
CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE
OF THE PLUG TO THE WIDE SLOT AND FULLY INSERT.
May 5 2011 - R11
North America:
Customer Service: 1-888-425-6739 (1-888-42-LOREX)
Tech Support: 1-877-755-6739 (1-877-75-LOREX)
Mexico: 1-800-514-6739
International: +800-425-6739-0
(Example: From the UK, dial 00 instead of +)
By Phone:
Technical Support (for technical/installation issues)
suppor[email protected]
By Email:
Customer Care (for warranty and accessory sales)
customerser[email protected]
Customer Feedback
Need Help?
CONTACT US FIRST
Online:
To order accessories, visit
www.lorextechnology.com
3 Easy Ways to Contact Us:
Please make sure to register your product at www.lorextechnology.com
to receive product updates and information
Product Support is available 24/7 including product
information, user manuals, quick start up guides and FAQ’s at
www.lorextechnology.com/support
DO NOT RETURN THIS PRODUCT TO THE STORE
May 5 2011 - R11
Necesita Ayuda
COMUNÍQUESE PRIMERO
CON NOSOTROS
Vous Avez Besoin
D’aide?
CONTACTEZ-NOUS
D’ABORD
3 façons faciles de nous contacter:
L’Amérique du Nord:
Service à la clientèle: 1-888-425-6739 (1-888-42-LOREX)
Support technique: 1-877-755-6739 (1-877-75-LOREX)
Mexico: 1-800-514-6739
International: +800-425-6739-0
(Exemple: À partir du Royaume-Uni, composez 00 au lieu de +)
Par Téléphone:
Veuillez veiller à enregistrer votre produit à www.lorex-
cctv.com/registration pour recevoir des mises à jour et
l’information de produit
Pour commander des accessoires, visitez
www.lorextechnology.com
le support des produits est disponible 24 heures sur 24, 7
jours sur 7, y compris les informations sur les produits, les
guides de l’utilisateur, les guides de démarrage rapide et les
foires à questions
www.lorextechnology.com/support
En ligne:
Commentaires des clients
support technique (pour les questions techniques et ’installa-
tion) [email protected]
Par Courriel:
service à la clientèle (pour les questions de garantie
et les ventes d’accessoires)
OU
3 maneras sencillas de comunicarse con
nosotros:
Norte América:
Atención al cliente: 1-888-425-6739 (1-888-42-LOREX)
Soporte técnico: 1-877-755-6739 (1-877-75-LOREX)
Mexico: 1-800-514-6739
Internacional: +800-425-6739-0
(Ejemplo: Desde el Reino Unido, marque el 00 en lugar del +)
Por Teléfono:
apoyo al producto disponible 24/7 incluyendo información
del producto, manuales para el usuario, guías de inicio
rápido y preguntas más frecuentes en
www.lorextechnology.com/support
En línea:
Cerciórese de por favor colocar su producto en www.
lorexcctv.com/registration para recibir actualizacio-
nes y la información del producto
Para colocar pedidos de accesorios, visite
www.lorextechnology.com
soporte técnico (para asuntos técnicos/la instalación)
Por Correo Electrónico:
servicio al cliente (respecto a la garantía y a la venta
de accesorios)
O
Comentarios de cliente
NO DEVUELVA ESTE PRODUCTO A LA TIENDA NE RETOURNEZ PAS CE PRODUIT AU MAGASIN
VIEW YOUR WORLD™
VOIR VOTRE MONDEMD
VER SUMUNDO™ALWAYS AWARE™
TOUJOURS AU COURANTMD
SIEMPRE CONSCIENTE™
SIMPLY AWARE™
SIMPLEMENT AU COURANTMD
SIMPLEMENTE CONSCIENTE™
May 5 2011 - R5
LOREX IS COMMITTED TO FULFILLING YOUR SECURITY NEEDS
• We have developed user friendly products and documentation.
Please read the Quick Start Guide and User Manual before you
install this product.
• Consumer Guides and Video Tutorials are available on our web
site at www.lorextechnology.com/support
• If you require further installation assistance, please visit
www.lorextechnology.com/installation or contact a
professional installer.
• Please refer to the “Need Help” insert for technical support and
customer care information.
• Please note that once the components of this product have been
unsealed, you cannot return this product directly to the store
without the original packaging.
THIS PRODUCT MAY REQUIRE PROFESSIONAL INSTALLATION
BEFORE YOU START
May 5 2011 - R5
LOREX SE COMPROMETE A SATISFACER
SUS NECESIDADES EN SEGURIDAD
LOREX S’ENGAGE À SATISFAIRE
VOS BESOINS SÉCURITAIRES
ESTE PRODUCTO PUEDE EXIGIR UNA
INSTALACIÓN PROFESIONAL
CE PRODUIT POURRAIT EXIGER UNE
INSTALLATION PROFESSIONNELLE
• Veuillez lire le guide de démarrage rapide et le
mode d’emploi avant d’installer ce produit
• Les guides du consommateur et les séances de tu-
torat vidéo sont disponibles sur l’Internet en visitant
www.lorextechnology.com/support
• Si vous avez besoin de l’aide pour l’installation,
veuillez visiter www.lorextechnology.com/installa-
tion ou contactez un spécialiste en installation
• Veuillez référer à l’insert “Need Help” pour
ob¬tenir de l’information sur le service à la clientèle
et le support technique
• Veuillez constater qu’une fois que les
com¬posantes de ce produit ont été retirées de
l’emballage, vous ne pourrez plus retourner ce
produit directement au magasi
• Favor de leer la guía de instalación rápida y la
guía del usuario antes de instalar este product.
• Puede conseguir las guías del consumidor y los
cursos en enseñanza video sobre el Internet visi-
tando www.lorexcctv.com/support
• Si necesita ayuda para la instalación, visite
www.lorextechnology.com/installation o contacte
un especialista en instalaciones
• Favor de referir al documento “Need Help” para
obtener información acerca del servicio al cliente y
al soporte técnico
• Favor de notar que una vez que los componentes
de este producto han sido removidos del embalaje,
no podrá devolver este producto directamente a la
tienda
AVANT DE
COMMENCER
ANTES DE
EMPEZAR
ALWAYS AWARE™
TOUJOURS AU COURANTMD
SIEMPRE CONSCIENTE™
VIEW YOUR WORLD™
VOIR VOTRE MONDEMD
VER SUMUNDO™
www.lorextechnology.com
v
6. Overloading - Do not overload wall outlets or extension
cords as this can result in the risk of fire or electric
shock. Overloaded AC outlets, extension cords, frayed
power cords, damaged or cracked wire insulation, and
broken plugs are dangerous. They may result in a
shock or fire hazard. Periodically examine the cord,
and if its appearance indicates damage or deteriorated
insulation, have it replaced by your service technician.
7. Power-Cord Protection - Power supply cords should
be routed so that they are not likely to be walked on or
pinched by items placed upon or against them. Pay
particular attention to cords at plugs, convenience
receptacles, and the point where they exit from the
product.
8. Surge Protectors - It is highly recommended that the
video equipment be connected to a surge protector.
Doing so will protect the equipment from damage
caused by power surges. Surge protectors should bear
the UL listing mark or CSA certification mark.
9. Uninterruptible Power Supplies (UPS) - Because
this product is designed for continuous, 24/7 operation,
it is recommended that you connect the product to an
uninterruptible power supply. An uninterruptible
power supply has an internal battery that will keep the
product running in the event of a power outage.
Uninterruptible power supplies should bear the UL
listing mark or CSA certification mark.
Caution: Maintain electrical safety. Power line
operated equipment or accessories connected to this
product should bear the UL listing mark or CSA
certification mark on the accessory itself and should
not be modified so as to defeat the safety features. This
will help avoid any potential hazard from electrical
shock or fire. If in doubt, contact qualified service
personnel.
Important Safeguards
In addition to the careful attention devoted to quality standards in the manufacture process of
your product, safety is a major factor in the design of every instrument. However, safety is your
responsibility too. This sheet lists important information that will help to ensure your enjoyment
and proper use of the product and accessory equipment. Please read them carefully before
operating and using your product.
General Precautions
1. All warnings and instructions in this manual should be followed.
2. Do not use receivers or video monitors in humid or wet places.
3. Keep enough space around the product for ventilation. Slots and openings in the storage
cabinet should not be blocked.
4. It is highly recommended to connect the product to a surge protector to protect from damage
caused by electrical surges. It is also recommended to connect the product to an
uninterruptible power supply (UPS), which has an internal battery that will keep the product
running in the event of a power outage.
5. Remove the plug from the outlet before cleaning. Do not use liquid aerosol detergents. Use a
water dampened cloth for cleaning.
Installation
1. Read and Follow Instructions - All the safety and
operating instructions should be read before the product
is operated. Follow all operating instructions.
2. Retain Instructions - The safety and operating
instructions should be retained for future reference.
3. Heed Warnings - Comply with all warnings on the
product and in the operating instructions.
4. Polarization - Do not defeat the safety purpose of the
polarized or grounding-type plug.
A polarized plug has two blades with
one wider than the other.
A grounding type plug has two blades
and a third grounding prong.
The wide blade or the third prong are
provided for your safety.
If the provided plug does not fit into your
outlet, consult an electrician for
replacement of the obsolete outlet.
5. Power Sources - This product should be operated only
from the type of power source indicated on the marking
label. If you are not sure of the type of power supplied
to your location, consult your video dealer or local power
company. For products intended to operate from battery
power, or other sources, refer to the operating
instructions.
www.lorextechnology.com
vi
Installation (Continued)
10. Ventilation - Slots and openings in the case are
provided for ventilation to ensure reliable operation
of the product and to protect it from overheating.
These openings must not be blocked or covered. The
openings should never be blocked by placing the video
equipment on a bed, sofa, rug, or other similar
surface. This product should never be placed near or
over a radiator or heat register. This product should
not be placed in a built-in installation such as a
bookcase or rack unless proper ventilation is provided
and the product manufacturer’s instructions have
been followed.
11. Attachments - Do not use attachments unless
recommended by the product manufacturer as they
may cause a hazard.
12. Water and Moisture - Do not use receivers or video
monitors near water — for example, near a bath tub,
wash bowl, kitchen sink or laundry tub, in a wet
basement, near a swimming pool and the like.
13. Heat - The product should be situated away from
heat sources such as radiators, heat registers,
stoves, or other products (including amplifiers) that
produce heat.
14. Accessories - Do not place this
video equipment on an unstable
cart, stand, tripod, or table. The
video equipment may fall,
causing serious damage to the
product. Use this product only
with a cart, stand, tripod,
bracket, or table recommended
by the manufacturer or sold with
the product. Any mounting of the product should
follow the manufacturer’s instructions and use a
mounting accessory recommended by the
manufacturer.
15. Camera Extension Cables – Check the rating of
your extension cable(s) to verify compliance with your
local authority regulations prior to installation.
16. Mounting - The cameras provided with this system
should be mounted only as instructed in this guide or
the instructions that came with your cameras, using
the provided mounting brackets.
17. Camera Installation- Cameras are not intended
for submersion in water. Not all cameras can be
installed outdoors. Check your camera
environmental rating to confirm if they can be
installed outdoors. When installing cameras
outdoors, installation in a sheltered area is required.
Service
1. Servicing - Do not attempt to service this video
equipment yourself, as opening or removing covers
may expose you to dangerous voltage or other
hazards. Refer all servicing to qualified service
personnel.
2. Conditions Requiring Service - Unplug this
product from the wall outlet and refer servicing to
qualified service personnel under the following
conditions:
A. When the power supply cord or plug is damaged.
B. If liquid has been spilled or objects have fallen into
the product.
C. If the product has been exposed to rain or water.
D. If the product has been dropped or the cabinet has
been damaged.
E. If the product does not operate normally by
following the operating instructions. Adjust only
those controls that are covered by the operating
instructions. Improper adjustment of other controls
may result in damage and will often require extensive
work by a qualified technician to restore the product
to its normal operation.
F. When the product exhibits a distinct change in
performance. This indicates a need for service.
7. Replacement Parts - When replacement parts are
required, have the service technician verify that the
replacements used have the same safety
characteristics as the original parts. Use of
replacements specified by the product manufacturer
can prevent fire, electric shock, or other hazards.
8. Safety Check - Upon completion of any service or
repairs to this product, ask the service technician to
perform safety checks recommended by the
manufacturer to determine that the product is in safe
operating condition.
Use
1. Cleaning - Unplug the product from the wall outlet
before cleaning. Do not use liquid cleaners or aerosol
cleaners. Use a damp cloth for cleaning.
2. Product and Cart Combination - Product and cart
combination should be moved with care. Quick stops,
excessive force, and uneven surfaces may cause the
product and cart combination to overturn.
3. Object and Liquid Entry - Never push objects of any
kind into this product through openings as they may
touch dangerous voltage points or “short-out” parts
that could result in a fire or electric shock. Never spill
liquid of any kind on the product.
4. Lightning - For added protection of this product
during a lightning storm, or when it is left unattended
and unused for long periods of time, unplug it from
the wall outlet and disconnect the antenna or cable
system. This will prevent damage to the product due
to lightning and power line surges.
WARNING
!
STRANGULATION HAZARD:
Infants have STRANGLED in power cords. Keep power
cords more than 3 feet away from cribs, bassinets, play
yards and other safe sleep environments for infants.
NOTICES
FCC Notice:
This equipment has been certified and found to
comply with the limits regulated by the FCC part 15,
subpart C. Operation is subject to the following two
conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any
interference received, including interference that
may cause undesired operation.
This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC rules. These limits
are designed to provide reasonable protection
against harmful interference in a residential
installation. This equipment generates, uses and
can radiate radio frequency energy and, if not
installed and used in accordance with the
instructions, may cause harmful interference to
radio communications.
However, there is no guarantee that interference
will not occur in a particular installation. If this
equipment does cause harmful interference to radio
or television reception (which can be determined by
turning the equipment on and off), the user is
encouraged to try to correct the interference by one
or more of the following measures:
• Reorient or relocate the receiving antenna
• Increase the separation between the equipment and
receiver
• Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected
• Consult the dealer or an experienced radio or
television technician for assistance
Warning:
To ensure compliance with the FCC’s RF exposure
guidelines, this equipment should be installed and
operated with minimum distance 20cm (7.87in)
between the radiator and nearby persons.
Industry Canada Notice:
This device complies with Industry Canada
licence-exempt RSS standard(s). Operation is
subject to the following two conditions: (1)This
device may not cause harmful interference, and
(2) This device must accept any interference
received, including interference that may cause
undesirable operation.
This Class B digital apparatus complies with
Canadian ICES-003.
Le présent appareil est conforme aux CNR
d'Industrie Canada applicables aux appareils radio
exempts de licence. L'exploitation est autorisée aux
deux conditions suivantes : (1) l'appareil ne doit pas
produire de brouillage, et (2) l'utilisateur de
l'appareil doit accepter tout brouillage
radioélectrique subi, même si le brouillage est
susceptible d'en compromettre le fonctionnement.
Cet appareil numérique de la classe B est conforme
à la norme NMB-003 du Canada.
MODIFICATION:
Any changes or modifications not expressly
approved by the grantee of this device could void the
user's authority to operate the device.
Toute modification non approuvée explicitement par
le fournisseur de licence de l'appareil peut
entraîner l'annulation du droit de l'utilsateur à
utiliser l'appareil.
RoHS:
This product is fully compliant with the European
Union Restriction of the Use of Certain Hazardous
Substances in Electrical and Electronic Equipment
("RoHS") Directive (2002/95/EC). The RoHS directive
prohibits the sale of electronic equipment
containing certain hazardous substances such as
lead, cadmium, mercury, and hexavalent
chromium, PBB, and PBDE in the European Union.
vii
It is imperative that the user follows the guidelines in this manual to avoid improper usage which
may result in damage to the product, electrical shock, and fire hazard injury. In order to improve
the features, functions, and quality of this product, the specifications are subject to change
without notice from time to time.
Please see the label on your device for FCC/IC certification numbers.
viii
Features
• Real time (25 frames per second) wireless video.
• Adaptive FHSS digital wireless technology minimizes conflicts with competing wireless
signals.
• Simple installation. No video cable required1.
• Connect multiple receivers to your surveillance recorder (DVR) to create a wireless
surveillance solution2.
• Up to 165ft (50m) indoor / 500ft (152m) outdoor wireless range3.
• SMA connectors for range extension accessories.
Camera Features
• Night vision range up to 90ft (27m) / 135ft (41m)4.
• Weatherproof housing ideal for indoor or outdoor use (IP66)5.
• Built in microphone for listen-in audio.
• Built-in auto-mechanical infrared camera filter achieves accurate color reproduction in
varying lighting conditions.
Receiver Features
• High gain antenna ensures improved long distance operation.
• Plugs directly into a TV or DVR (BNC adapter included) with 4ft termination cable for flexible
installation.
• Safety warning feature notifies you when the camera is out of range.
• Convenient signal strength indicator.
1. Camera requires a wired connection to a power outlet. Power adapter included.
2. Using multiple receivers in close proximity to each other may cause a slight slowdown in frame rate performance. Try to
maintain at least a few inches of space between each receiver.
3. Maximum wireless transmission range. Actual range dependent upon building materials and other obstructions in path of
wireless signal.
4. Stated IR illumination ranges are based on ideal conditions in total darkness and in typical outdoor night time ambient lighting.
Actual range and image clarity depends on installation location, viewing area, and light reflection / absorption level of object.
5. Not intended for submersion in water. Installation in a sheltered area recommended.
ix
Table of Contents
1. Getting Started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
2. Wireless Receiver. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
2.1 Front . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
2.2 Rear . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
3. Wireless Camera . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
4. Installing The Camera . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
4.1 Installation Warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
4.2 To Install the Camera . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
5. Installing the Wireless Receiver. . . . . . . . . . . . . . . . . . . 6
5.1 On-Screen Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
6. Pairing Cameras . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
7. Appendix A: System Specifications. . . . . . . . . . . . . . . . . 8
7.1 Receiver Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
7.2 Camera Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
8. Appendix B: About Digital Wireless Technology. . . . . . 9
9. Appendix C: Facts About Digital Wireless Cameras. . 10
9.1 Wired vs. Wireless Cameras . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
9.2 Does a wireless camera require power? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
9.3 How far can a wireless camera transmit a video signal? . . . . . . . . . . . . . . . . . . . . 10
9.4 Are digital wireless camera signals secure? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
9.5 How many frames per second should I expect from a digital wireless camera? . 11
9.6 How many wireless cameras can I install? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
10. Appendix D: Troubleshooting . . . . . . . . . . . . . . . . . . . 12
11. Appendix E: Frequently Asked Questions . . . . . . . . . 13
12. Appendix F: Extending Wireless Signal Range. . . . . 14
1
Getting Started
1. Getting Started
The system comes with the following components:
1 X CAMERA MOUNTING STAND*
1 X MOUNTING KIT*
1 X WIRELESS CAMERA
(WITH SUNSHADE)* 1 X WIRELESS RECEIVER*
2 X POWER ADAPTERS*
(FOR CAMERA & RECEIVER)
*Number of cameras and receivers may vary by model.
2 X WIRELESS ANTENNA*
(FOR CAMERA & RECEIVER)
1 X RCA/BNC ADAPTER*
CHECK YOUR PACKAGE TO CONFIRM THAT YOU HAVE RECEIVED THE COMPLETE SYSTEM,
INCLUDING ALL COMPONENTS SHOWN ABOVE.
INSTRUCTION MANUAL
QUICK START GUIDE
(Mounting kit contents may
differ from image)
11
2
Wireless Receiver
2. Wireless Receiver
1
23
2.1 Front
1Removable Wireless Antenna (SMA): Connects to
antenna jack at the back of receiver.
2Front LED: Glows green to indicate receiver is
powered on.
3Pairing Button: For details, see “Pairing
Cameras” on page 7.
2.2 Rear
4Termination Cable: Contains AC Power, RCA video
(yellow), and RCA audio (white) connectors.
5Antenna Jack: Connect the wireless antenna here.
54
3
Wireless Camera
3. Wireless Camera
1
3
2
4
5
1Removable Wireless Antenna (SMA): Connects to antenna jack at the back of camera.
2Camera Stand
3Pairing Button: For details, see “Pairing Cameras” on page 7.
4Antenna Jack: Connect the wireless antenna here.
5AC Power Cable
Attention - This camera includes an Auto Mechanical IR Cut Filter. When the camera
changes between Day/Night viewing modes, an audible clicking noise may be heard
from the camera. This clicking is normal and indicates that the camera filter is working.
4
Installing The Camera
4. Installing The Camera
• Before you install the camera, carefully plan where and how it will be
positioned and where you will route the cable that connects the camera
to the power adapter.
• Before starting permanent installation, verify the camera’s
performance by observing the image on a monitor when camera is
positioned in the same location / position where it will be permanently
installed.
4.1 Installation Warnings
• Aim the camera(s) to best optimize the viewing area: select a location for the camera that
provides a clear view of the area you want to monitor, that is free from dust, and that is not
in line-of-sight to a strong light source or direct sunlight.
• Avoid installing the camera where there are thick walls or obstructions between the camera
and the receiver.
• Avoid installing in a location which requires the wireless signal to pass through cement,
concrete, and metal structures. This will reduce the range of transmission. For details, see
“Appendix C: Facts About Digital Wireless Cameras” on page 10.
• Select a location for the camera that has an ambient temperature between 14°F~122°F
(-10°C~50°C)
• Not intended for submersion in water. For outdoor use, installation in a sheltered location is
recommended.
4.2 To Install the Camera
1Screw the antenna to the back of the camera.
2Use the included mounting screws to mount the stand to the mounting surface:
• Mark the position of the
screw holes on the wall.
• Drill holes and insert the
drywall plugs (included) as
needed.
• Firmly attach the stand to the
wall using the provided
screws.
5
Installing The Camera
3Screw the camera onto the head of the stand (1).
Adjust the angle of the camera until the desired view is set. Tighten the thumbscrew to
secure the camera position (2).
1
2
4Connect the power cable from the camera to the power adapter. Plug the power adapter into
a power outlet or surge protector.
6
Installing the Wireless Receiver
5. Installing the Wireless Receiver
Before powering on the receiver, make sure to first connect and
power on the camera. This will ensure a proper connection.
1Screw the wireless antenna to the back of the receiver.
2Connect the yellow video cable and white audio cable (mono) to your TV, DVR, or observation
system.
• Use the RCA/BNC adapter (included) to connect the video cable to a BNC port.
3Connect the power cable to the power adapter. Plug the power adapter into a power outlet or
surge protector.
4Place the receiver in a place that will have clear reception to your camera1.
5.1 On-Screen Display
1Signal Indicator: The signal indicator shows the strength of the signal being received from
the camera. The number of bars in the signal indicator shows the strength of the signal.
One or no bars indicates the signal is poor. Four bars indicate a very strong signal.
2Status Indicator: The status indicator message "No Signal" appears when the receiver is
trying to locate a camera.
ATTENTION:If the signal is low (e.g. 1 or 2 bars) adjust the antennas or reposition the
camera or receiver to improve signal strength.
1. Avoid installing in a location which requires the wireless signal to pass through cement, con-
crete, and metal structures. This will reduce the range of transmission.
Signal Indicator Status Indicator
1 2
7
Pairing Cameras
6. Pairing Cameras
IMPORTANT
The camera and receiver have already been pre-paired at the factory, which
means that they are exclusively communicating with each other. If for some
reason the pairing is lost, follow these steps to pair up the camera and receiver.
To pair the camera to the receiver:
1Make sure that the camera and receiver are both powered up.
2On the receiver, press and hold the Pairing button for 5 seconds to activate pairing function.
• The on-screen displays informs you that you have 30 seconds to press the pair button on the
camera.
3Press the Pair button on the back of the camera. You must press the Pair button on the
camera within 30 seconds of pressing the Pair button on the Wireless Receiver. If pairing is
successful, live video from the camera will immediately appear on the monitor.
Pair button
Pairing button
8
Appendix A: System Specifications
7. Appendix A: System Specifications
7.1 Receiver Specifications
7.2 Camera Specifications
Receiving Frequency Range 2.400GHz~2.480GHz
RX Sensitivity -81dBm
Demodulation GFSK
Data Rate 160 Kb/s
Supported Resolution VGA (640 x 480) up to 25 Frames per Second
Termination RCA Video, RCA Audio
Power Requirement 12V DC +/- 10%
Power Consumption 110mA Max
Operating Temperature Range 14°F ~ 122°F / -10°C ~ 50°C
Transmitting Frequency Range 2.400GHz~2.480GHz
TX Power 16dBm
TX Range 165ft (50m) indoor / 500ft (152m) outdoor1
1. Maximum wireless transmission range. Actual range dependent upon building materials and other obstructions in path of
wireless signal.
Data Rate 160 Kb/s
Modulation GFSK
Image Sensor Type 1/4" Color CMOS Image Sensor
Effective Pixels H: 640 V: 480
Image Compression MPEG4
Image Resolution VGA (640x480)
Lens 3.6mm F2.0
Field of View (Diagonal) 63°
AGC On
AES 1/60 ~ 1/62,500 Sec.
Power Requirement 12V DC +/- 10%
Power Consumption 400mA Max with IR LED
170mA Max without IR LED
Operating Temperature Range 14°F ~ 122°F / -10°C ~ 50°C
Environment Rating2
2. Not intended for submersion in water. Installation in a sheltered area recommended.
IP66
IR LED Quantity / Type 30 pieces / 850nm
Night Vision Range3
3. Stated IR illumination ranges are based on ideal conditions in total darkness and in typical outdoor night time ambient
lighting. Actual range and image clarity depends on installation location, viewing area, and light reflection / absorption
level of object.
90ft (27m) / 135ft (41m)
Built in Auto IR Turn On / Off CdS Drive Auto IR LED turn On/Off Circuit
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
Lorex LW2220 Manuel utilisateur
- Catégorie
- Équipement musical supplémentaire
- Taper
- Manuel utilisateur
- Ce manuel convient également à
dans d''autres langues
- English: Lorex LW2220 User manual
Documents connexes
-
Lorex LW2900 SERIES Manuel utilisateur
-
Lorex Technology LH3281001 Manuel utilisateur
-
-
Lorex LW2702 Manuel utilisateur
-
-
-
-
-
Lorex LZV2622BW Series Manuel utilisateur
-