Eizo Computer Monitor CG245W Manuel utilisateur

Important

Please read PRECAUTIONS, this User’s Manual and Setup Guide (separate

volume) carefully to familiarize yourself with safe and effective usage.

• Please read the Setup Guide (separate volume)

• The latest User’s Manual is available for download from our site:

http://www.eizo.com

Cover

2

[Location of Caution Statement]

Product speciﬁcations may vary with sales areas.

Conﬁrm the speciﬁcations in the manual written in the language of the region of purchase.

This product has acquired TCO standard that relates to safety, ergonomics, environment and so forth of

ofﬁce equipment. For overview of the TCO, refer to our website.

http://www.eizo.com

No part of this manual may be reproduced, stored in a retrieval system, or transmitted, in any form or by

any means, electronic, mechanical, or otherwise, without the prior written permission of EIZO NANAO

CORPORATION.

EIZO NANAO CORPORATION is under no obligation to hold any submitted material or information

condential unless prior arrangements are made pursuant to EIZO NANAO CORPORATION’s receipt of

said information.

Although every effort has been made to ensure that this manual provides up-to-date information, please

note that EIZO monitor specications are subject to change without notice.

Adobe is a registered trademark of Adobe Systems Incorporated in the United States and other countries.

Apple, Macintosh, Mac OS and ColorSync are registered trademarks of Apple Inc.

VGA is a registered trademark of International Business Machines Corporation.

Windows and Windows Vista are registered trademarks of Microsoft Corporation.

The round gothic bold bit map font used for this product is designed by Ricoh.

DisplayPort icon and VESA are trademarks and registered trademarks of Video Electronics Standards Association.

PowerManager, ColorNavigator and UniColor Pro are trademarks of EIZO NANAO CORPORATION.

EIZO, EIZO Logo and ColorEdge are registered trademarks of EIZO NANAO CORPORATION in Japan and other countries.

3

Notice for this monitor

Aside from creating documents, viewing multimedia content, and other general purposes, this product is also suited to

applications such as graphics creation and digital photo processing, where accurate color reproduction is a priority.

This product has been adjusted specically for use in the region to which it was originally shipped. If the product is

used outside the region, it may not operate as specied in the specications.

This product may not be covered by warranty for uses other than those described in this manual.

The specications noted in this manual are only applicable for power cords and signal cables specied by us.

Use optional products manufactured or specied by us with this product.

As it takes about 30 minutes for the performance of electrical parts to stabilize, adjust the monitor 30 minutes or more

after the monitor power has been turned on.

In order to suppress the luminosity change by long-term use and to maintain the stable luminosity, use of a monitor in

lower brightness is recommended.

When the screen image is changed after displaying the same image for extended periods of time, an afterimage may

appear. Use the screen saver or timer to avoid displaying the same image for extended periods of time.

Periodic cleaning is recommended to keep the monitor looking new and to prolong its operation lifetime. (Refer to

“Cleaning” on the next page.)

The LCD panel is manufactured using high-precision technology. However, note that the appearance of any missing

pixels or lit pixels does not indicate damage to the LCD monitor. Percentage of effective pixels : 99.9994% or higher.

The backlight of the LCD panel has a xed life span. When the screen becomes dark or begins to icker, please

contact your dealer.

Do not press on the panel or edge of the frame strongly, as this may result in the display malfunction, such as the

interference patterns, etc. If pressure is continually applied to the LCD panel, it may deteriorate or damage your LCD

panel. (If the pressure marks remain on the LCD panel, leave the monitor with a white or black screen. The symptom

may disappear.)

Do not scratch or press on the panel with any sharp objects, such as a pencil or pen as this may result in damage to the

panel. Do not attempt to brush with tissues as this may scratch the LCD panel.

When the monitor is cold and brought into a room or the room temperature goes up quickly, dew condensation

may occur inside and outside the monitor. In that case, do not turn the monitor on and wait until dew condensation

disappears, otherwise it may cause some damages to the monitor.

4

Cleaning

Attention

• Never use any solvents or chemicals, such as thinner, benzene, wax, alcohol, disinfectant, and abrasive cleaner,

which may damage the cabinet or LCD panel.

●

LCD Panel

• Clean the LCD panel with a soft cloth such as cotton cloth or lens cleaning paper.

• If necessary, stubborn stains can be removed by using the provided ScreenCleaner, or moistening part

of a cloth with water to enhance its cleaning power.

●

Cabinet

• Clean the cabinet with a soft cloth dampened with a little mild detergent.

To use the monitor comfortably

• An excessively dark or bright screen may affect your eyes. Adjust the brightness of the monitor

according to the environmental conditions.

• Staring at the monitor for a long time tires your eyes. Take a 10-minute rest every hour.

5

CONTENTS

Cover ............................................................. 1

Notice for this monitor ............................................. 3

CONTENTS ............................................................. 5

Chapter 1 Introduction ........................................ 7

1-1. Features .............................................................. 7

1-2. Controls and Functions .................................... 8

1-3. Utility Disk .......................................................... 9

●

Disk contents and software overview .............. 9

●

To use ColorNavigator ...................................... 9

1- 4. Basic Operation and Functions .....................10

Basic operation of menu .....................................10

Showing Button Guide ........................................11

Functions ..............................................................12

Chapter 2 Adjusting Screen .............................. 14

2-1. Setting Screen Resolution ...............................14

Compatible Resolutions/Frequencies ...............14

Setting Resolution ...............................................15

●

Windows 7 .......................................................15

●

Windows Vista .................................................15

●

Windows XP ....................................................15

●

Mac OS X ........................................................15

2-2. Expanding Signal Output Range

[Range Extension] ..........................................16

2-3. Displaying Screen Correctly ...........................16

Digital Input ..........................................................16

Analog Input .........................................................16

2-4. Color Adjustment ............................................ 20

●

To select the display mode (Color Mode) ....... 20

●

To perform advanced adjustments ..................21

●

Adjustment items in each mode ......................21

●

To adjust the brightness [Brightness] ............. 22

●

To adjust the contrast [Contrast] .................... 22

●

To adjust the color temperature [Temperature] ... 22

●

To adjust the gamma value [Gamma] ............ 23

●

To adjust the hue [Hue] .................................. 23

●

To adjust the color saturation [Saturation] ..... 23

●

To enhance the outline of the image

[Outline Enhancer] ..........................................24

●

To adjust the gain value [Gain] ........................24

●

To adjust the black level [Black Level].............24

●

To adjust six colors [6 Colors] ........................ 25

2-5. Displaying Lower Resolutions ....................... 26

●

To change screen size [Screen Size] ............. 26

2-6. Conguring moving image performance

[Overdrive] ..................................................... 26

Chapter 3 Setting Monitor ................................. 27

3-1. Enabling/Disabling Mode Selection

[Mode Preset] ................................................. 27

3-2. Locking Buttons [Key Lock] ........................... 27

3-3. Setting the EIZO Logo Display [Logo] .......... 28

3-4. Setting Orientation [Orientation]................... 28

3-5. Setting Language [Language] ....................... 29

3-6. Setting Range of Frequency

[Signal Bandwidth] ........................................ 29

3-7. Setting the Display Position of the Adjustment

Menu [Menu Position] ................................... 30

3-8.

Sets the brightness of the front buttons

[Indicator] ....................................................... 30

3-9. Restoring the Default Setting .........................31

●

To reset color adjustment values [Color Reset] ....31

●

To reset all adjustments to the factory default

settings [All Reset] ..........................................31

Chapter 4 SelfCalibration .................................. 32

4-1. Executing SelfCalibration [Calibration] ........ 32

4-2. Checking Calibration Results [Result].......... 32

4-3.

Setting Calibration Details [Setting] ............. 33

●

Setting the mode to execute SelfCalibration

[Mode Selection] ............................................ 33

●

Setting the calibration targets ........................ 33

●

Setting the monitor date and time

[Clock Adjustment] ......................................... 34

●

Setting the calibration schedule [Schedule] ... 35

Chapter 5 Power Saving Function .................... 36

5-1. Setting the Power Saving [Power Save] ........ 36

Chapter 6 Troubleshooting ............................... 37

Chapter 7 Reference .......................................... 40

7-1. Attaching an Arm ............................................. 40

7-2. Connecting More than Two PCs to the Monitor ...41

●

To switch the input signal .................................41

●

To set input signal selection [Input Selection] .... 42

7-3. Making Use of USB (Universal Serial Bus) ... 43

●

Required System Environment ....................... 43

●

Connection Procedure (Setup of USB Function) ... 43

6

CONTENTS

7-4. Displaying Monitor Information ..................... 44

●

Displaying signal information [Signal Info] ..... 44

●

Displaying monitor information [Monitor Info] ... 44

7-5. Specications .................................................. 45

7-6. Glossary ........................................................... 49

7-7. Preset Timing .................................................... 52

About TCO’ 03 ..................................................... 53

FCC Declaration of Conformity ......................... 54

HinweiseHinweise zur Auswahl des richtigen

Schwenkarms für Ihren Monitor ........................ 55

Hinweis zur Ergonomie ...................................... 55

LIMITED WARRANTY .......................................... 56

CONTENTS

7

Chapter 1 Introduction

Thank you very much for choosing an EIZO Color Monitor.

1-1. Features

• 24” wide format LCD

• Wide color gamut of 98% of Adobe RGB

• Applicable to the resolution of 1920 dots x 1200 lines

• HDCP (High-bandwidth Digital Content Interface)

• Frame Synchronous mode supported (23.75 - 30.5Hz, 47.5 - 61Hz)

• Applicable to DisplayPort (applicable to 8 bit or 10 bit, not applicable to audio signals)

• 3 signal input terminals (DVI-I x 2, DisplayPort x 1)

• Color Mode function reproduces color gamut and gamma compliant with Adobe®RGB, [EBU/

REC709/SMPTE-C] broadcasting standards, as well as [DCI] digital cinema standards.

“2-4. Color Adjustment” (page 20)

• Attaching the “Adjustment Certicate” to describe the grayscale and uniformity characteristics of the

monitor individually

• Portrait/Landscape display available (rotate 90 degrees clockwise

• Monitor hood attached

• The front buttons light to improve operability in dark places.

“3-8. Sets the brightness of the front buttons [Indicator]” (page 30)

• This product is equipped with a built-in color measurement sensor, and supports SelfCalibration in

which the monitor executes calibration independently.

“Chapter 4 SelfCalibration” (page 32)

• The provided “ColorNavigator” calibration software enables you to calibrate monitor characteristics

and generate color proles

“1-3. Utility Disk” (page 9)

• Color Vision Deciency Simulation Software “UniColor Pro” supported

This software can be downloaded from http://www.eizo.com

• Power saving function

This product is equipped with power saving function.

- Power Consumption when main power switch is Off: 0W

Equipped with main power switch.

Turning off the main power switch completely shuts off power supply to the monitor while the monitor is not

used.

CAUTION

Be careful of the following points when using the monitor hood.

• Do not carry the monitor with the hood attached.

While carrying the monitor, the hood may fall or slip off, which may result in injury or equipment

damage.

• Do not place any objects on the hood.

If the hood falls or slips off or the monitor falls over, it may result in injury or equipment damage.

Attention

• Storing or using the monitor at a temperature of under 30°C and a humidity of under 70% is recommended, or

it may affect the measurement accuracy of the built-in sensor. Avoid storing or using the sensor where it may be

exposed to direct sunlight.

8

Chapter 1 Introduction

NOTE

• This monitor supports the Portrait/Landscape display. This function allows you to change the orientation of the

Adjustment menu when using the monitor screen in vertical display position. (Refer to “3-4. Setting Orientation

[Orientation]” (page 28).)

• For using the monitor with “Portrait” position, the graphics board supporting portrait display is required. When

using the monitor with “Portrait” position, the setting needs to be changed depending on the graphics board used

in your PC. Refer to the manual of the graphics board for details.

1-2. Controls and Functions

16

12

17

11

13

15

1 2 3 4 5 6 7 8

9 10

14

1 Ambient Light Sensor Measures ambient light.

2

button

Switches input signals for display images.

3

button

Allows you to switch the Color Mode.

4

button

Displays the SelfCalibration menu.

5

button

Cancels the adjustment/setting or exit the adjustment menu.

6

buttons

Chooses an adjustment item or increases/decreases adjusted values for

advanced adjustments using the Adjustment menu.

7

button

Displays the Adjustment menu, determines an item on the menu screen,

and saves values adjusted.

8

button

Turns the power on or off.

Indicates monitor’s operation status.

Blue : Operating

Flashing blue

(2 times for each)

: In the following cases, this noties that recalibration

is required.

• When the timer is set in ColorNavigator (CAL mode)

• When the SelfCalibration schedule is set

Orange : Power saving

Off : Power off

9 Main Power switch Turns the main power on or off.

10 Power connector Connects the power cord.

11 Input signal connectors Display Port Connector x 1

12 Input signal connectors DVI-I Connector x 2

13 USB port (Up) Connects the USB cable to use the software that needs USB

connection, or to use USB Hub function.

14 USB port (Down) Connects a peripheral USB dirive.

15 Stand Used to adjust the height and angle of the monitor screen.

16 Security lock slot Complies with Kensington's MicroSaver security system.

17 Cable holder Covers the monitor cables.

Adjustment menu

9

Chapter 1 Introduction

1-3. Utility Disk

An “EIZO LCD Utility Disk” (CD-ROM) is supplied with the monitor. The following table shows the

disk contents and the overview of the software programs.

●

Disk contents and software overview

The disk includes application software programs for adjustment, and User’s Manual. Refer to “Readme.

txt” or the “read me” le on the disk for software startup procedures or le access procedures.

Item Overview For

Windows

For

Macintosh

A “Readme.txt” or “read me” le

√ √

ColorNavigator An application software for calibrating monitor

characteristics and generating ICC proles (for Windows)

and Apple ColorSync proles (for Macintosh).

(A PC must be connected to the monitor with the supplied

USB cable.) Refer to the descriotion later.

√ √

Screen

Adjustment Utility

Monitor pattern display software used when adjusting the

image of the analog input signal manually.

√

–

Screen adjustment

pattern les

Used when adjusting the image of the analog signal input

manually. If the Screen Adjustment Utility is not applicable

to your PC, use this pattern les to adjust the image.

√

–

User’s Manual (PDF le)

√ √

●

To use ColorNavigator

Refer to the corresponding User’s Manual on the CD-ROM disk in order to install and use the software.

When using this software, you will need to connect a PC to the monitor with the supplied USB cable. For

more information refer to the “7-3. Making Use of USB (Universal Serial Bus)” (page 43).

10

Chapter 1 Introduction

1- 4. Basic Operation and Functions

Basic operation of menu

1 Displaying Menu

Displaying Adjustment menu

Press . The adjustment menu appears.

Current mode

Menu title

Settings

Menu

Item

Displaying SelfCalibration menu

Press , The SelfCalibration menu appears.

Current time

Menu title

Item

2 Adjusting/Setting

1. Choose a menu to adjust/set with , and press .

2. Choose an item to adjust/set with , and press .

11

Chapter 1 Introduction

3. Adjust/set the selected item with , and press .

3 Exiting

Press a few times.

The adjustment menu nishes.

Showing Button Guide

Press the front buttons (except button), the button guide appears above the button. (When using the monitor

with “Portrait” position, the button guide appears next to the button.)

Tips

• The button guide will continue to appear while the Adjustment menu or Mode menu is showing.

• The button guide is displayed differently depending on the selected menu or status.

• In CAL mode, although Button Guide are displayed above the

and buttons, the brightness cannot be adjusted.

12

Chapter 1 Introduction

Functions

The following table shows all the Adjustment menu’s adjustment and setting menus.

Main Menu



Item



Adjusting/Setting

Color

Brightness

“2-4. Color Adjustment” (page 20)

Contrast

Temperature

Gamma

Advanced

Settings

Hue

Saturation

Outline Enhancer

Gain

Black Level

6 Colors

Color Reset

“3-9. Restoring the Default Setting” (page 31)

Screen

Screen Size

“2-5. Displaying Lower Resolutions” (page 26)

Range Extension

“2-2. Expanding Signal Output Range

[Range Extension]” (page 16)

Analog

Adjustment

Auto Adjustment

“2-3. Displaying Screen Correctly” (page 16)

Range Adjustment

Clock

Phase

Hor.Position

Ver.Position

PowerManager

Power Save

“5-1. Setting the Power Saving [Power

Save]” (page 36)

Indicator

“3-8. Sets the brightness of the front buttons

[Indicator]” (page 30)

Menu Settings

Language

“3-5. Setting Language [Language]” (page 29)

Orientation

“3-4. Setting Orientation [Orientation]” (page

28)

Menu Position

“3-7. Setting the Display Position of the

Adjustment Menu [Menu Position]” (page 30)

Tools

Input Selection

“7-2. Connecting More than Two PCs to the

Monitor” (page 41)

Overdrive

“2-6. Conguring moving image

performance [Overdrive]” (page 26)

Mode Preset

“3-1. Enabling/Disabling Mode Selection

[Mode Preset]” (page 27)

Signal Info

“7-4. Displaying Monitor Information” (page 44)

Monitor Info

All Reset

“3-9. Restoring the Default Setting” (page 31)

* The adjusting/setting function on the <Color> menu depend on the selected Color mode(page 21). The above table

shows the sub menus when the “Custom” mode is selected (See “2-4. Color Adjustment” (page 20)).

13

Chapter 1 Introduction

The following table shows all SelfCalibration menu’s adjustment and setting menus.

Main Menu



Item



Adjusting/Setting

SelfCalibration

Calibration

“4-1. Executing SelfCalibration [Calibration]”

(page 32)

Result Calibration Result

“4-2. Checking Calibration Results [Result]”

(page 32)

Ambient Light

Setting Mode Selection

“4-3. Setting Calibration Details [Setting]”

(page 33)

Target

Schedule

Clock Adjustment

14

Chapter 2 Adjusting Screen

2-1. Setting Screen Resolution

Compatible Resolutions/Frequencies

The monitor supports the following resolutions.

Analog Input

Resolution Display Mode Frequency Dot Clock

640×480 VGA 60Hz

170MHz (Max.)

720×400 VGA TEXT 70Hz

800×600 VESA 60Hz

1024×768 VESA 60Hz

1280×960 VESA 60Hz

1280×1024 VESA 60Hz

1600×1200 VESA 60Hz

1680×1050

VESA CVT 60Hz

1920×1080

CEA-861 60Hz

1920×1200* VESA CVT RB 60Hz

Digital Input (DVI/DisplayPort)

Resolution Display Mode Frequency Dot Clock

640×480 VGA 60Hz

164.5MHz (Max.)

720×400 VGA TEXT 70Hz

800×600 VESA 60Hz

1024×768 VESA 60Hz

1280×960 VESA 60Hz

1280×1024 VESA 60Hz

1600×1200 VESA 60Hz

1680×1050 VESA CVT 60Hz

1920×1080 CEA-861 60Hz

1920×1200* VESA CVT RB 60Hz

A graphics board in conformance with VESA standard is required.

*

1

Recommended resolution (Set this resolution).

15

Chapter 2 Adjusting Screen

Setting Resolution

When you connect the monitor to the PC and nd that the resolution is improper, or when you want to

change the resolution, follow the procedure below.

●

Windows 7

1. Right-click the mouse anywhere on the desktop except for icons.

2. From the displayed menu, click “Screen resolution”.

3. On the “Screen Resolution” dialog, select the monitor.

4. Click “Resolution” to select the desired resolution.

5. Click the [OK] button.

6. When a conrmation dialog is displayed, click [Keep changes].

●

Windows Vista

1. Right-click the mouse anywhere on the desktop except for icons.

2. From the displayed menu, click “Personalize”.

3. On the “Personalization” window, click “Display Settings”.

4. On the “Display Settings” dialog, select the “Monitor” tab and select desired resolution in the

“Resolution” eld.

5. Click the [OK] button.

6. When a conrmation dialog is displayed, click [Yes].

●

Windows XP

1. Right-click the mouse anywhere on the desktop except for icons.

2. From the displayed menu, click “Properties”.

3. When the “Display Properties” dialog is displayed, click the “Settings” tab and select desired

resolution for “Screen resolution” under “Display”.

4. Click the [OK] button to close the dialog.

●

Mac OS X

1. Select “System Preferences” from the Apple menu.

2. When the “System Preferences” dialog is displayed, click “Displays” for “Hardware”.

3. On the displayed dialog, select the “Display” tab and select desired resolution in the “Resolutions”

eld.

4. Your selection will be reected immediately. When you are satised with the selected resolution, close

the window.

16

Chapter 2 Adjusting Screen

2-2. Expanding Signal Output Range [Range Extension]

The signal range can be expanded to meet the input signal from 64/1023 - 1019/1023 to 0/1023 -1023/1023.

Procedure

1. Choose <Screen> from the Adjustment menu, and press

.

2. Choose <Range Extension> from the <Screen> menu, and press .

3. Select “On” with or .

4. Press to exit the adjustment.

Attention

• Settings cannot be performed when CAL mode is being displayed.

2-3. Displaying Screen Correctly

Digital Input

When digital signals are input, images are displayed correctly based on the preset data of the monitor.

When performing advanced adjustment, see “2-4. Color Adjustment” (page 20) and subsequent pages.

Analog Input

Attention

• Wait 30 minutes or more from monitor power on before starting adjustments.

(Allow the monitor to warm up for at least 30 minutes before making adjustments.)

• Depending on the condition of the displayed screen, the auto adjustment function may not operate.

The monitor screen adjustment is used to suppress ickering of the screen or adjust screen position and

screen size correctly according to the PC to be used.

The Self Adjust function works when all of the following conditions are satised.

• When a signal is input into the monitor for the rst time or when the resolution or Vertical/

Horizontal Frequency not displayed before is set

• When signals with the vertical resolution over 480 are input

If the screen is not displayed correctly even after performing the auto adjustment, perform the screen

adjustments according to the procedures on the following pages to use the monitor comfortably.

[Adjustment Procedure]

1 Perform the auto adjustment.

●

To adjust ickering, screen position, and screen size automatically [Auto Adjustment]

Procedure

1. Choose <Screen> from the Adjustment menu, and press .

2. Choose <Analog Adjustment> from the <Screen> menu, and press .

3. Choose <Auto Adjustment>, and press .

The auto adjustment function works (the message “In Progress” appears) to correctly adjust the ickering, screen

position, and screen size correctly.

When the auto adjustment is completed, a message appears. Select “OK” to conrm the new settings or “Cancel”

to restore the previous settings, and press

.

17

Chapter 2 Adjusting Screen

Attention

• This function works correctly when an image is fully displayed over the Windows or Macintosh display area. It

does not work properly when an image is displayed only on a part of the screen (command prompt window, for

example) or when a black background (wallpaper, etc.) is in use.

• This function does not work correctly with some graphics boards.

If the screen is not displayed correctly even after adjusting in step 1 above, perform the adjustments

according to the procedures on the following pages. When the screen is displayed correctly, go to step

5 “To adjust color gradation automatically [Range Adjustment]”.

2 Prepare the display pattern for the analog display adjustment.

Windows

1. Load the “EIZO LCD Utility Disk” to your PC.

2. Start the “Screen Adjustment Utility” from the startup menu. If it cannot be started, open the

screen adjustment pattern les.

Tips

• For details and instructions on opening the “Screen adjustment pattern les”, refer to the “Readme.txt” le.

Other than Windows

Download the “Screen adjustment pattern les” from our site: http://www.eizo.com

Tips

• For details and instructions on opening the “Screen adjustment pattern les”, refer to the “Readme.txt” le.

3 Perform the auto adjustment again with the analog screen adjustment pattern

displayed.

●

To adjust ickering, screen position, and screen size automatically [Auto Adjustment]

Procedure

1. Display Pattern 1 in full screen on the monitor using the “Screen Adjustment Utility” or the screen

adjustment patternles.

2. Choose <Screen> from the Adjustment menu, and press .

3. Choose <Analog Adjustment> from the <Screen> menu, and press .

To proceed with the subsequent adjustments, select an item in <Analog Adjustment> of the <Screen> menu.

4. Choose <Auto Adjustment>, and press .

The auto adjustment function works (the message “In Progress” appears) to adjust the ickering, screen position,

and screen size correctly.

When the auto adjustment is completed, a message appears. Select “OK” to conrm the new settings or “Cancel”

to restore the previous settings, and press

.

If the screen is not displayed correctly even after adjusting in step 3 above, perform the adjustments

according to the procedures on the following pages. When the screen is displayed correctly, go to step

5 “To adjust color gradation automatically [Range Adjustment]”.

18

Chapter 2 Adjusting Screen

4 Perform advanced adjustments for the following using the <Screen> menu of

the <Analog Adjustment>.

Adjust the clock, phase and position, in this order.

●

To eliminate vertical bars [Clock]

Procedure

1. Choose <Clock> from the <Analog Adjustment> menu, and press .

2. Adjust the clock with or .

Press slowly so as not to miss the adjustment point.

3. Press to exit the adjustment.

When blurring, ickering or bars appear on the screen after adjustment, proceed to [Phase] to remove ickering

or blurring.

●

Remove ickering or blurring [Phase]

Procedure

1. Choose <Phase> from the <Analog Adjustment> menu, and press .

2. Adjust the phase with or .

3. Press to exit the adjustment.

Attention

• Flickering or blurring may not be eliminated depending on your PC or graphics board.

●

To correct screen position [Hor.Position] [Ver.Position]

NOTE

• Since the number of pixels and the pixel positions are xed on the LCD monitor, only one position is provided to

display images correctly. The position adjustment is made to shift an image to the correct position.

Procedure

1. Choose <Hor.Position> or <Ver.Position> from the <Analog Adjustment> menu, and press .

2. Adjust the position with or .

3. Press to exit the adjustment.

19

Chapter 2 Adjusting Screen

5 Adjust the color gradation.

●

To adjust color gradation automatically [Range Adjustment]

Every color gradation (0 to 255) can be displayed by adjusting the signal output level.

Procedure

1. Display Pattern 2 in full screen on the monitor using the “Screen Adjustment Utility” or the screen

adjustment pattern les.

2. Choose <Range> from the <Analog Adjustment> menu, and press .

The color gradation is adjusted automatically.

When the auto adjustment is completed, a message appears. Select “OK” to conrm the new settings or “Cancel”

to restore the precious settings, and press

.

3. Close the Pattern 2. When using the “Screen Adjustment Utility”, close the program.

20

Chapter 2 Adjusting Screen

2-4. Color Adjustment

●

To select the display mode (Color Mode)

Color Mode allows you to select easily the adequate mode suitable for the monitor’s application.

Color Mode

Mode Purpose

1-Custom

Available for the color settings according to your preference.

2-Adobe

®

RGB

Suitable for color matching with

Adobe

®

RGB

compatible peripherals.

3-sRGB

Suitable for color matching with sRGB compatible peripherals.

4-EBU

Suitable for reproducing the color gamut and gamma as set forth by EBU (European

Broadcasting Union) standards.

5-REC709

Suitable for reproducing the color gamut and gamma as set forth by the ITU-R Rec. 709

standard.

6-SMPTE-C

Suitable for reproducing the color gamut and gamma as set forth by SMPTE-C stan-

dards.

7-DCI

Suitable for reproducing the color gamut and gamma as set forth by DCI standards.

8-CAL1

9-CAL2

10-CAL3

Displays the screen adjusted by calibration software.

Attention

• “CAL” mode can be adjusted by using the calibration software “ColorNavigator” and SelfCalibration (page 32).

• With default settings only one CAL mode can be selected for every input signal displayed.

• A CAL mode will be chosen by the ColorNavigator in accordance with the displayed input signal.

• Avoid operating any funciton of the monitor while using ColorNavigator.

The mode menu

appears.

Procedure

1. Press .

Mode menu appears at the lower left of the screen.

2. The mode among the list is highlighted in turn each time is pressed.

You can switch the current mode with or while the mode menu is being displayed.

Custom←→Adobe

®

RGB←→sRGB←→EBU←→REC709

CAL3←→CAL2←→CAL1←→DCI←→SMPTE-C

NOTE

• The Adjustment menu and the Mode menu cannot be displayed at the same time.

• You can disable a specic mode to be selected. For more information, refer to “3-1. Enabling/Disabling Mode

Selection [Mode Preset]” (page 27).

La page charge ...

Eizo Computer Monitor CG245W Manuel utilisateur

Ce manuel convient également à

Eizo Computer Monitor CG245W Manuel utilisateur

dans d''autres langues

Documents connexes