Eizo MX191 Le manuel du propriétaire

Taper
Le manuel du propriétaire
Important
Please read this Installation Manual, and “Instructions for Use”
(separate volume) carefully to familiarize yourself with safe and
effective usage.
Please refer to the “Instructions for Use” for basic information
ranging from connection of the monitor to a PC to using the monitor.
The latest Installation Manual is available for download from our web
site:
http://www.eizoglobal.com
Installation Manual
Color LCD Monitor
2
This product has been adjusted specically for use in the region to which it was originally shipped. If
operated outside this region, the product may not perform as stated in the specications.
No part of this manual may be reproduced, stored in a retrieval system, or transmitted, in any form or by
any means, electronic, mechanical, or otherwise, without the prior written permission of EIZO Corporation.
EIZO Corporation is under no obligation to hold any submitted material or information condential unless
prior arrangements are made pursuant to EIZO Corporation’s receipt of said information. Although every
effort has been made to ensure that this manual provides up-to-date information, please note that EIZO
monitor specications are subject to change without notice.
3
CONTENTS
CONTENTS
CONTENTS ............................................................. 3
Chapter 1 Basic Operations and Functions .... 4
1-1. Basic Adjustment Menu Operations........... 4
Displaying the Adjustment Menu .................... 4
Modifying the Setting ...................................... 4
Displaying the Function Name ........................ 4
Storing the Setting/Exiting the
Adjustment Menu ............................................ 4
1-2. Functions ....................................................... 5
Chapter 2 Adjusting Screens ............................ 7
2-1. Compatible Resolutions .............................. 7
2-2. Setting the Resolution ................................. 7
Windows 10 ..................................................... 7
Windows 8.1/Windows 8/Windows 7 .............. 7
Windows Vista ................................................. 7
OS X Mountain Lion (10.8) and later ............... 7
Mac OS X 10.7 ................................................ 8
2-3. Adjusting Color ............................................. 8
Selecting the Display Mode (CAL
Switch Mode) ................................................... 8
Performing Advanced Adjustments ................ 8
Adjustable Settings in Each Mode .................. 9
Adjusting Brightness ....................................... 9
Adjusting Contrast ..........................................10
Adjusting Temperature ...................................10
Adjusting Gamma ...........................................11
Adjusting Gain ................................................11
Adjusting Hue .................................................12
Adjusting Saturation .......................................12
2-4. Adjusting Screens .......................................13
Digital Signal Input .........................................13
Analog Signal Input ........................................13
2-5. Adjusting Sharpness ...................................16
Chapter 3 Setting Monitor ............................... 17
3-1. Setting Language .........................................17
3-2. Displaying or Hiding the EIZO Logo ..........17
3-3. Locking Operation Buttons ........................18
3-4. Resetting to Default .....................................19
Resetting the Color Adjustments ...................19
Resetting All Adjustments to Defaults ............19
Chapter 4 Power Saving Functions ................ 20
4-1. Power Saving Mode .................................... 20
Digital Signal Input ........................................ 20
Analog Signal Input ....................................... 20
4-2. Setting Power Indicator Display................ 20
4-3. Setting Auto Brightness Adjustment of
the Monitor....................................................21
4-4. Setting Auto Power-Off Function of the
Monitor ..........................................................21
Chapter 5 Troubleshooting .............................. 22
5-1. No Picture .................................................... 22
5-2. Imaging Problems (for both digital and
analog) .......................................................... 23
5-3. Imaging Problems (for digital only) .......... 23
5-4. Imaging Problems (for analog only) ......... 24
5-5. Other Problems ........................................... 24
5-6. USB Problems ............................................. 24
Chapter 6 Reference ........................................ 25
6-1. Attaching Arm ............................................. 25
6-2. Connecting Multiple PCs ........................... 26
Switching among Input Signals ..................... 26
Setting Input Signal Switching Procedure .... 27
6-3. Showing Monitor Information.................... 27
6-4. Main Default Settings ................................. 28
6-5. Preset Timing .............................................. 29
LIMITED WARRANTY .......................................... 30
4Chapter 1 Basic Operations and Functions
Chapter 1 Basic Operations and Functions
1-1. Basic Adjustment Menu Operations
Displaying the Adjustment Menu
Pressing the function button to change the setting or pressing allows you to display the
adjustment menu.
When pressing the input signal selection, mode or brightness control
When pressing the menu button
Modifying the Setting
The operation methods differ depending on the icons.
Display example Operation method
As for the icons displayed with the +/- marks, selecting + allows you to increase the
setting value or selecting - to decrease it.
Selecting the icon displayed with mark allows you to show the next menu.
/ The Enable/Disable setting is toggled by selecting the icon. X is displayed when the
function is invalid.
Displaying the Function Name
1. Press while the adjustment menu is displayed.
2. The function name is displayed.
Storing the Setting/Exiting the Adjustment Menu
After completing the setting, selecting allows you to store the setting. Selecting repeatedly
allows you to close the adjustment menu.
Note
The adjustment menu automatically nishes if no input operations occur within 45 seconds.
5
Chapter 1 Basic Operations and Functions
1-2. Functions
The following table shows setting items of the adjustment menu.
Icon Function Overview
- Determines the setting. Selecting the
icon repeatedly allows you to close
the adjustment menu.
Analog
AutoSize Flickering, screen position,
and screen size are adjusted
automatically.
Returns to the pre-adjusted
status.
Determines the adjustment.
AutoRange Every color gradation (0 to 255) can
be displayed by adjusting the signal
output level.
Returns to the pre-adjusted
status.
Determines the adjustment.
Manual Performs advanced adjustment when
the automatic adjustment fails. Adjust
the clock, phase and position, in this
order.
Clock Eliminates vertical bars.
Phase Removes ickering or blurring.
Position Corrects the screen position
Use to adjust the
position.
Color
Color Menu Independent setting and saving of
color adjustment are available for
each CAL Switch mode.
Mode*Selects the best display mode easily
according to monitor’s application.
Each time you press the button, the
mode is switched.
Brightness Adjusts the screen brightness.
Adjustable range: 0 to 100 %
Contrast Adjusts the contrast.
Adjustable range: 0 to 100 %
Gain Determines the mixing rate of red,
green and blue, and adjust the color
tone.
Adjustable range: 0 to 100 %
Allows you to determine the
mixing rate of red.
Allows you to determine the
mixing rate of green.
Allows you to determine the
mixing rate of blue.
Advanced Adjusts each function of hue and
saturation.
Hue The hue can be adjusted. If you set
the hue to a high value, the image
turns greenish. If low, the image turns
purplish.
Adjustable range: -100 to 100
Icon Function Overview
Saturation The color saturation can be adjusted.
Adjustable range: -100 to 100
Temperature The color temperature can be
adjusted. The gain preset values are
set for each color temperature setting
value.
Adjustable range: Native,
6500K-15000K (specied by every
500K unit, including 9300K), User (at
gain adjustment)
Gamma Gamma can be adjusted.
Adjustable range: 1.8, 2.0, 2.2
Tools
Info1 Displays the input signal status
(analog/digital), resolution, H/V
frequency.
Info2 Displays the model name, usage time
and serial number.
Input Signal Sets to detect the input signal
automatically. The Auto/Manual
setting is toggled by selecting the
icon.
Reset Resets the adjustment values to the
factory settings.
Attention
After resetting, you cannot undo the
operation.
All:
Resets all adjustments to the default
settings (factory settings).
Color (CUS*):
Only the adjustment values in the
current CAL Switch mode will revert
to the default settings (factory
settings).
Menu Settings
Language A language for the Adjustment menu
and messages can be selected.
The language setting is toggled by
selecting the icon.
Power Save
Auto
EcoView
The sensor on the front side of the
monitor detects the environmental
brightness to adjust the screen
brightness automatically and
comfortably by using the Auto
EcoView function. The Enable/
Disable setting is toggled by selecting
the icon.
Power LED This function allows you to set the
power indicator (blue) ON/OFF in
the monitor ON condition. The On/
Off setting is toggled by selecting the
icon.
6Chapter 1 Basic Operations and Functions
Icon Function Overview
Off Timer This function allows the monitor to
automatically turn off after a specied
time has passed. This function
serves to protect the monitor from
after-images caused when the same
image is left displayed for a long time.
Use this function when an image is
displayed throughout the day.
Adjustable range: Off, 1 to 23h
Screen
Sharpness This function allows you to
emphasize the outline of the image
by emphasizing the color difference
between the pixels composing the
image and to improve a sense of
quality and materiality. Contrarily, this
function allows you to show the image
smoothly by blurring the outline of the
image.
*1 The name of the current CAL Switch mode is
displayed.
7
Chapter 2 Adjusting Screens
Chapter 2 Adjusting Screens
2-1. Compatible Resolutions
For compatible resolutions of this product, refer to Instruction for Use "Compatible Resolutions".
2-2. Setting the Resolution
Windows 10
1. Right-click the mouse anywhere on the desktop except for icons.
2. From the displayed menu, click “Display Settings”.
3. On the “Customize your display” dialog box, click “Advanced display settings”.
4. Select a monitor, then choose a resolution from the “Resolution” pull-down menu.
5. Click the “Apply” button.
6. When a conrmation dialog box is displayed, click “Keep changes”.
Windows 8.1/Windows 8/Windows 7
1. For Windows 8.1 / Windows 8, click the “Desktop” tile on the Start Screen to display the desktop.
2. Right-click the mouse anywhere on the desktop except for icons.
3. From the displayed menu, click “Screen Resolution”.
4. On the “Screen Resolution” dialog box, select the monitor.
5. Click “Resolution” to select the desired resolution.
6. Click the “OK” button.
7. When a conrmation dialog box is displayed, click “Keep changes”.
Windows Vista
1. Right-click the mouse anywhere on the desktop except for icons.
2. From the displayed menu, click “Personalize”.
3. On the “Personalization” window, click “Display Settings”.
4. On the “Display Settings” dialog box, select the “Monitor” tab and select desired resolution in the
Resolution” eld.
5. Click the “OK” button.
6. When a conrmation dialog box is displayed, click “Yes”.
OS X Mountain Lion (10.8) and later
1. Select “System Preferences” from the Apple menu.
2. When the “System Preferences” dialog box is displayed, click “Displays”. (For Mac OS X Mountain
Lion (10.8), click “Displays” for “Hardware”.)
3. On the displayed dialog box, select the “Display” tab, then choose “Change” for “Resolutions”.
4. The list of selectable resolutions is displayed. Select the desired resolution.
If the desired resolution is not displayed in the list, hold down the Option key and select “Change”.
5. Your selection will be reected immediately.When you are satised with the selected resolution,
close the window.
8Chapter 2 Adjusting Screens
Mac OS X 10.7
1. Select “System Preferences” from the Apple menu.
2. When the “System Preferences” dialog box is displayed, click “Displays” for “Hardware”.
3. On the displayed dialog box, select the “Display” tab and select desired resolution in the
Resolutions” eld.
4. Your selection will be reected immediately. When you are satised with the selected resolution,
close the window.
2-3. Adjusting Color
Selecting the Display Mode (CAL Switch Mode)
A desired mode can be selected easily according to the monitor application.
Display Modes
Mode Purpose
(DICOM-CL) DICOM-CL mode. Available for setting tailored to X-ray lm color (clear base).
(TXT) Text mode. Suitable for displaying texts for word processing or spreadsheets.
(CUS) Custom mode. Available for the color settings according to your preference.
(CAL) CAL mode. Displays the screen adjusted by calibration software.
Procedure
1. Press .
The adjustment menu appears.
2. Press again while the adjustment menu is displayed.
Each time you press the button, the mode is switched.
3. Select .
The mode selected is set.
→ DICOM-CL → TXT → CUS → CAL →
Note
You can also select the CAL Switch mode by pressing and select (Color).
Performing Advanced Adjustments
Independent setting and saving of color adjustment are available for each CAL Switch mode.
Attention
It takes about 30 minutes for the performance of electrical parts to stabilize. Please wait 30 minutes or more
after the monitor power has been turned on or the monitor has recovered from the power saving mode, and
then adjust the monitor.
Perform (AutoRange) rst when adjusting color for analog input signals. (See To adjust color gradation
automatically” (page 16).)
The same image may be seen in different colors on multiple monitors due to their monitor-specic
characteristics. Make ne color adjustment visually when matching colors on multiple monitors.
Note
The values shown in “%” or “K” are available only as reference.
9
Chapter 2 Adjusting Screens
Adjustable Settings in Each Mode
According to the CAL Switch mode selected, the adjustable function differs. (You cannot select any
non-adjustable or non-settable function.)
√: Adjustable, - : Unadjustable
Icon Function CAL Switch mode
DICOM-CL TXT CUS CAL
Brightness - √ √ -
Contrast - √ √ -
Temperature - √ √ -
Gamma - √ √ -
Gain - - √ -
Saturation - - √ -
Hue - - √ -
*1 If you adjust the calibration in this mode using the calibration kit exclusive for to this monitor (see RadiCS
LE /“Accessories” in the “Instructions for Use”.), only “Brightness” and “Color Reset” are adjustable.
Adjusting Brightness
The screen brightness is adjusted by changing the brightness of the backlight (light source from the
LCD back panel).
Setting Range
0 to 100 %
Procedure
1. Press .
The adjustment menu appears.
2. Select (Color).
3. Adjust the brightness with or of (Brightness).
4. Select .
The adjustment is completed.
Note
You can also adjust the brightness by pressing or while the adjustment menu is not displayed.
10 Chapter 2 Adjusting Screens
Adjusting Contrast
The luminance of the screen is adjusted by varying the video signal level.
Setting Range
0 to 100 %
Procedure
1. Press .
The adjustment menu appears.
2. Select (Color).
3. Adjust the contrast with or of (Contrast).
4. Select .
The adjustment is completed.
Note
You can also adjust the contrast by pressing while the adjustment menu is not displayed, and press
or of (Contrast).
At a contrast level of 50 %, every color gradation is displayed.
When adjusting the monitor, users are recommended to adjust the brightness, which may not downgrade
the gradation characteristics, prior to adjusting the contrast. Perform the contrast adjustment in the following
cases.
- If you think the screen is dark even when the brightness level is set to 100 %
- If you think the black level of the screen is bright (Reduce the brightness level and set the contrast level
above 50 %)
Adjusting Temperature
The color temperature can be adjusted.
The color temperature is normally used to express the hue of “white” and/or “black” by a numerical
value. The value is expressed in degrees “K” (Kelvin).
The screen becomes reddish at a low color temperature, and bluish at a high color temperature, like
the ame temperature. The gain preset values are set for each color temperature setting value.
Setting Range
Native, 6000K - 15000K (specied by every 500K unit, including 9300K), User (at gain adjustment)
Procedure
1. Press .
The adjustment menu appears.
2. Select (Color).
3. Select (Color Menu).
4. Adjust the color temperature with or of (Temperature).
5. Select .
The adjustment is completed.
Note
“Gain” allows you to perform more advanced adjustments (refer to Adjusting Gain” (page 11)).
If you set “Native”, the image is displayed in the preset color of the monitor (Gain: 100 % for each RGB).
When gain is changed, the color temperature is changed to “User.
11
Chapter 2 Adjusting Screens
Adjusting Gamma
Gamma can be adjusted. The brightness of the monitor varies depending on the input signal,
however, the variation rate is not proportional to the input signal. To keep the balance between the
input signal and the brightness of the monitor is called as “Gamma correction”.
Setting Range
1.8, 2.0, 2.2
Procedure
1. Press .
The adjustment menu appears.
2. Select (Color).
3. Select (Color Menu).
4. Adjust the gamma value with or of (Gamma).
5. Select .
The adjustment is completed.
Adjusting Gain
The brightness of each color component red, green, and blue is called Gain. You can change the hue
of “white” by adjusting gain.
Setting Range
0 to 100 %
Procedure
1. Press .
The adjustment menu appears.
2. Select (Color).
3. Select (Color Menu).
4. Select (Gain).
5. Adjust the respective value of (Red)/ (Green)/ (Blue) with or .
6. Select .
The adjustment is completed.
Note
The value of gain changes with that of color temperature.
When gain is changed, the color temperature is changed to “User.
12 Chapter 2 Adjusting Screens
Adjusting Hue
The hue can be adjusted. If you set the hue to a high value, the image turns greenish. If low, the
image turns purplish.
Setting Range
-100 to 100
Procedure
1. Press .
The adjustment menu appears.
2. Select (Color).
3. Select (Color Menu).
4. Select (Advanced).
5. Adjust the hue with or of (Hue).
6. Select .
The adjustment is completed.
Attention
After this adjustment, some color gradations may not be displayed.
Adjusting Saturation
The color saturation can be adjusted.
Setting Range
-100 to 100
Procedure
1. Press .
The adjustment menu appears.
2. Select (Color).
3. Select (Color Menu).
4. Select (Advanced).
5. Adjust the saturation with or of (Saturation).
6. Select .
The adjustment is completed.
Attention
After this adjustment, some color gradations may not be displayed.
Note
The minimum value (-100) changes the screen to monochrome.
13
Chapter 2 Adjusting Screens
2-4. Adjusting Screens
Digital Signal Input
When digital signals are input, images are displayed correctly based on the preset data of the
monitor, but if you perform more advanced adjustment, see “2-3. Adjusting Color” (page 8)” and
subsequent pages.
Analog Signal Input
Attention
It takes about 30 minutes for the performance of electrical parts to stabilize. Please wait 30 minutes or more
after the monitor power has been turned on or the monitor has recovered from the power saving mode, and
then adjust the monitor.
The Self Adjust (automatic screen adjustment) function does not work for the images under the resolution of
800 × 600 (SVGA).
The self adjustment and auto adjustment functions work correctly when an image is fully displayed over the
Windows or Macintosh display area. They do not work properly in the cases below:
- when an image is displayed only on a part of the screen (command prompt window, for example)
- when a black background (wallpaper, etc.) is in use
Also, these functions cannot work properly in some graphic boards.
The monitor screen adjustment is used to suppress ickering of the screen or adjust screen position
and screen.
Note
The self adjustment function works when all of the following conditions are satised:
- When a signal is input into the monitor for the rst time or when a resolution or vertical/horizontal scan
frequency not used before is set.
If the screen is not displayed correctly even after performing the self adjustment operation, adjust the
screen according to the procedures on the following pages to use the monitor comfortably.
How to Set
1. Perform the auto adjustment.
To adjust ickering, screen position, and screen size automatically
Procedure
1. Press .
The adjustment menu appears.
2. Select (Analog).
3. Select (AutoSize).
Flickering, screen position, and screen size are adjusted automatically.
4. After conrming the screen message, select (OK).
If you select (Undo), the monitor returns to the pre-adjusted status.
If the screen is not displayed correctly even after performing Auto Adjustment, perform the adjustments
according to the procedures on the following pages. If the screen is displayed correctly, go to “5. Adjusting
color gradation.” (page 16).
14 Chapter 2 Adjusting Screens
2.
Prepare to use analog screen adjustment patterns.
Download the “Screen adjustment pattern les” from our site: http://www.eizoglobal.com
Note
For details and instructions on opening the “Screen adjustment pattern les”, refer to the Readme.txt le.
3.
Perform the auto adjustment again with the analog screen adjustment pattern
displayed.
To adjust ickering, screen position, and screen size automatically
Procedure
1. Display Pattern 1 in full screen on the monitor using the “Screen adjustment pattern les”.
2. Press .
The adjustment menu appears.
3. Select (Analog).
4. Select (AutoSize).
Flickering, screen position, and screen size are adjusted automatically.
5. After conrming the screen message, select (OK).
If you select (Undo), the monitor returns to the pre-adjusted status.
If the screen is not displayed correctly even after performing Auto Adjustment, perform the adjustments
according to the procedures on the following pages. If the screen is displayed correctly, go to “5. Adjusting
color gradation.” (page 16).
4.
Choose from the adjustment menu to perform advanced adjustments.
Select (Manual) to adjust the clock, phase and position, in this order.
To eliminate vertical bars
Procedure
1. Adjust the clock with or of (Clock) to eliminate vertical bars.
Note
Press the control button slowly so as not to miss the adjustment point.
When blurring, ickering or bars appear on the screen after adjustment, proceed to “To remove ickering or
blurring”.
15
Chapter 2 Adjusting Screens
To remove ickering or blurring
Procedure
1. Adjust the phase with or of (Phase) to remove ickering or blurring.
Attention
Flickering or blurring may not be eliminated depending on your PC or graphics board.
To correct the screen position
Note
Since the number of pixels and the pixel positions are xed on the LCD monitor, only one position is provided
to display images correctly. The position adjustment is made to shift an image to the correct position.
Procedure
1. Select (Position).
2. Adjust the position with (Left) / (Right) / (Down) / (Up) to display the image
properly in the display area of the monitor.
3. Select .
The adjustment is completed.
Note
When vertical bars appear on the screen after adjustment, go back to “To eliminate vertical bars”. (Clock →
Phase → Position)
4. Close Pattern 1.
16 Chapter 2 Adjusting Screens
5.
Adjusting color gradation.
To adjust color gradation automatically
Every color gradation (0 to 255) can be displayed by adjusting the signal output level.
Procedure
1. Display Pattern 2 in full screen on the monitor using the “Screen adjustment pattern les”.
2. Press .
The adjustment menu appears.
3. Select (Analog).
4. Select (AutoRange).
Color gradation is adjusted automatically.
5. After conrming the screen message, select (OK).
If you select (Undo), the monitor returns to the pre-adjusted status.
6. Close Pattern 2.
2-5. Adjusting Sharpness
This function allows you to emphasize the outline of the image by emphasizing the color difference
between the pixels composing the image and to improve a sense of quality and materiality. Contrarily, this
function allows you to show the image smoothly by blurring the outline of the image.
Adjustable range
-3 to 3
Procedure
1. Press .
The adjustment menu appears.
2. Select (Screen).
3. Adjust the sharpness with or of (Sharpness).
4. Select .
The adjustment is completed.
17
Chapter 3 Setting Monitor
Chapter 3 Setting Monitor
3-1. Setting Language
A language for the Adjustment menu and messages can be selected.
Selectable languages
English/German/French/Spanish/Italian/Swedish/Simplied Chinese/Traditional Chinese/Japanese
Procedure
1. Press .
The adjustment menu appears.
2. Select (Settings).
3. The language setting is switched by selecting (Language).
English
German
French
Spanish
Italian
Swedish
Simplied Chinese
Traditional Chinese
Japanese
4. Select .
The language selected is set.
3-2. Displaying or Hiding the EIZO Logo
The EIZO logo can be displayed or hidden.
Procedure
1. Press to turn off the monitor.
2. Hold down and press to turn on the monitor.
The EIZO logo display setting is toggled by performing the operation in step 2.
18 Chapter 3 Setting Monitor
3-3. Locking Operation Buttons
The settings can be locked to prevent them being changed.
There are two types of locks: “Key Lock” and “Menu Lock.
Key Lock: Locks buttons other than the Power button.
Menu Lock: Locks buttons other than the Power, Input, and Mode
buttons.
Procedure
1. Press to turn off the monitor.
2. Hold down and press to turn on the monitor.
The adjustment menu appears.
3. Each time you press , the mode is switched.
Unlock
Menu Lock
Key Lock
4. Select .
The mode selected is set.
Attention
The key lock function is also activated when calibration is performed using RadiCS/RadiCS LE.
19
Chapter 3 Setting Monitor
3-4. Resetting to Default
There are two different Resets: Color Reset for only resetting the color adjustments to the default settings
and All Reset for resetting all settings to the defaults.
Attention
After resetting, you cannot undo the operation.
Note
Regarding the default setting, see 6-4. Main Default Settings” (page 28).
Resetting the Color Adjustments
Only the color adjustment value for the current CAL Switch mode can be reset to the default settings.
Procedure
1. Press .
The adjustment menu appears.
2. Select (Tool).
3. Select (Reset).
If you will not perform the reset operation, select .
4. Select (Color (CUS*1)).
The color adjustment values revert to the default settings.
*1 The name of the current CAL Switch mode is displayed.
Resetting All Adjustments to Defaults
All adjustments are reset to the default settings.
Procedure
1. Press .
The adjustment menu appears.
2. Select (Tool).
3. Select (Reset).
If you will not perform the reset operation, select .
4. Select (All).
All setting values revert to the default settings.
20 Chapter 4 Power Saving Functions
Chapter 4 Power Saving Functions
4-1. Power Saving Mode
Attention
When not using the monitor, you can disconnect the power plug so that the power is completely cut.
Five seconds before the monitor enters the power saving mode, it displays a preliminary message.
Digital Signal Input
This monitor complies with the DVI DMPM standard.
Power Saving System
The monitor enters the power saving mode after ve seconds in connection with the PC setting.
PC Monitor Power Indicator
On Operation mode Blue
Power saving mode Power saving mode Orange
Resumption Procedure
Operate the mouse or keyboard to resume the normal screen operations.
Analog Signal Input
This monitor complies with the VESA DPM standard.
Power Saving System
PC Monitor Power Indicator
On Operation mode Blue
Power saving
mode
STAND-BY
SUSPENDED
Off
Power saving mode Orange
Resumption Procedure
Operate the mouse or keyboard to resume the normal screen operations.
4-2. Setting Power Indicator Display
This function allows you to set the power indicator (blue) ON/OFF in the monitor ON condition.
Procedure
1. Press .
The adjustment menu appears.
2. Select (PowerSave).
3. The On/Off setting is toggled by selecting (Power LED).
On
Off
4. Select .
The mode selected is set.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39

Eizo MX191 Le manuel du propriétaire

Taper
Le manuel du propriétaire

dans d''autres langues