Fanvil V65 Guide d'installation

Marque: Fanvil

Modèle: V65

Taper: Guide d'installation

Ce manuel convient également à

V65

Quick Installation Guide

V1.0

Fanvil Technology Co., Ltd

www.fanvil.com

Screen icon

Keys features

DSS Keys, It can be set as line

key/function key/speed dial key, etc.

Soft keys

Message waiting indicator

Left and right navigation keys

Up navigation key, Shortcut to call log

Down navigation key, Shortcut to Status

OK key, Shortcut to Menu

Home key, go back to Homepage

Return key, go back to the previous

directory

Phonebook key

Voice message key

In idle mode or during ringing: increase or

decrease ringer volume

In communication: increase or decrease

handset, headset or hands-free volume

Headset key, activate/deactivate headset

In idle mode: activate/deactivate silent

mode

In communication mode: mute/un-mute a

call

Redial key, access to redial the last record

Hand-free key, activate/deactivate hands

free

Handset Cord

Ethernet Cable

Quick Installation Guide

IP Phone

Handset

Stand

Power Adapter

(Optional)

Wall Stand

(Buy separately)

In hands-free mode

Call forward activated

New SMS

Dialed call(s)

In headset mode

Disable do not disturb

(Beige)

New VM messages

Internet connected

In handset mode

Do not disturb

activated (Red)

Voice quality level of

call

Internet is

disconnected

Mute activated

SIP hotspot activated

Keypad locked

No IP address

Silent mode

VLAN activated

Forward call(s)

Wireless network

connected

Call is on hold

VPN activated

Missed call(s)

Wireless network

disconnected

Auto-answering

activated

Bluetooth device

paired connection

Received call(s)

Wireless network

failure

Packaging list

Installation the device

Please follow the instructions in below picture to install the device.

Attach the stand and adjust the angle of the screen

Wall mounting (wall stand need buy separately)

Connecting to the device

Please connect power adapter, network, PC, handset, and headset to

the corresponding ports as described in below picture.

①USB port: connect USB device (USB flash drive)

②Power port: connect the power adapter.

③Network port: connecting local area network or internet.

④PC port: the network port connect to the computer.

⑤Headset port: connect headset.

⑥Handset port: connect IP Phone handset..

Network connect

Using Ethernet

1．The power on the device and connect the WAN port of the phone

to the RJ45 socket of a hub/switch or a router (LAN side of the router)

using the Ethernet cable.

2．The default is DHCP mode.

Using WiFi

1．The power on the device and make sure the phone is idle.

2．Press Menu > Basic > WLAN, Enabled the WiFi Feature.

3．Press scan to search for currently available wireless network.

4．Enter the available network and select the WiFi you want to

connect.

5．Press connect soft key and enter the appropriate password to

connect to the WiFi. The default is DHCP mode.

Configuration

Configuration via LCD menu of phone

1．Press Menu > Advanced (default password 123)

2．Select Network: To configure the Network Settings

(IPv4/IPv6/IPv4&IPv6, DHCP/Static/PPPoE).

3．Select Accounts: To configure enable the account, fill the SIP

server address, port, user name, password etc.

4．Save the configuration.

Configuration via web

1. Get the IP address from the phone: Press down navigation key, or

Menu > Status > IPv4 / IPv6.

2. Login: Input the IP address in the web browser. The PC and phone

should be in the same IP address segment (The default username

and password are both ‘admin’.)

3. Configure: Select network/account etc, and fill the relevant

content.

4. Save the configuration.

Language setting

1．Press Menu key > Basic > Language.

2．Select the desired language and press OK soft key.

Making a call

1．Pre-dialing: enter the phone number and pick up the handset.

2．Direct dialing: lift the handset and enter the phone number.

3．Handsfree: enter phone number and press or vice versa.

4．Headset: enter phone number and press or vice versa.

5．Designated line: press line key, enter phone number and press

dial key.

Accepting a call

1．Using the handset: pick up the handset.

2．Using the headset: press .

3．Using the handsfree: press .

Redial

1．Press key, redial a call number.

Call Mute

1．Press to Mute the microphone during the call.

2．Press again to un-mute the conversation.

Putting a call on hold

1．Press Hold soft key, caller is put on hold.

2．To retrieve the call press Resume soft key.

3．Note: with more than one active call, select desired call with the

navigator key and use the corresponding soft key to hold or resume.

Call transfer

Attended transfer:

1．Press Xfer soft key during the active conversation, the call is put

on hold.

2．Dial the second telephone number.

3．When the call is answered, then press Xfer soft key to complete

the operation.

Blind transfer:

1．Press Xfer soft key during the active conversation, the call will be

on hold.

2．Then enter the 2nd telephone number and press Xfer soft key.

Call forward

1．Press Menu > Features > Call Forward.

2．Select the line, the type of forward, enter the destination number

and status, and press OK soft key.

Call conference

1．Once in line with 1st caller, press Conf soft key, 1st caller is put on

hold.

2．Then call the 2nd number.

3．After, 2nd call is established, press Conf soft key to set up the

conference.

Programmable keys

1．You can configure shortcuts for the programmable keys.

2．Press Menu > Basic > Keyboard, select among the configurable

items, and select your desired type and value, press OK key.

Do not disturb

1．Press DND soft key, and enable the device do not disturb mode.

2．Or press Menu > Features > DND, and select the Mode and Type,

and press OK key.

Voice mail

1．To access your voice mailbox, press or Menu > Message >

Voice Message, number of messages will be indicated if provided by

your server or pbx.

2．Select the line and press Play to call.

Bluetooth

1．Press Menu > Basic > Bluetooth.

2．Press OK soft key to enter the bluetooth open interface. After

opening, press Scan soft key to display the list of bluetooth scanned.

Select any device and press connect.

WiFi

1．Press Menu > Basic > WLAN.

2．Press OK soft key to enter the WLAN open interface. After

opening, press Scan soft key to display the list of Wi-Fi scanned.

3．Press Enter soft key to enter the available Network, select the

wireless network, press the Connect soft key and enter the password

to connect.

Call list

1．Press up navigator key or Menu > CallLog > Local Call Logs

2．Scroll through the list using navigator key.

3．To dial an entry, press Dial soft key or pickup handset or press

or .

Phonebook

Access Phonebook:

1．Press or Contact soft key or Menu > PhoneBook > Local

Contacts.

2．Select All Contacts or other group.

3．To dial an entry, press Dial soft key or pickup handset or press

or .

Add new entry:

1．Press Contact soft key, Press All Contacts or other group > Press

Add.

2．Enter name and number and press OK soft key.

Regulatory Compliance

Federal Communication Commission (FCC) — USA

This device complies with Part 15 of FCC Rules. Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and

(2) this device must accept any interference received; including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference in residential installation. This equipment

generates, uses, and can radiate radio frequency energy, and if it is not installed and used in accordance with the instruction manual, it

may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the

equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

Warning: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the

user’s authority to operate the equipment.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with

minimum distance of 20cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or

transmitter.

This equipment complies with Part 68 of the FCC rules and the requirements adopted by the ACTA. On the bottom of this

equipment is a label that contains, among other information, a product identifier in the format US: 3I1IPNANV65. If requested,

this number must be provided to the telephone company.

Industry Canada Equipment Standard for Digital Equip-ment (ICES) — Canada

This Class B digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.

Innovation, Science and Economic Development (ISED) — Canada

This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s)

. Operation is subject to the following two conditions:

(1) This device may not cause interference.

(2) This device must accept any interference, including interference that may cause undesired operation of the device.

L’émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d’Innovation, Sciences et Développement économique Canad

a applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes:

(1) L’appareil ne doit pas produire de brouillage;

(2) L’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement.

This equipment complies with ISED radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with

minimum distance of 20cm between the radiator and your body.

Cet équipement est conforme aux limites d’exposition aux rayonnements ISED établies pour un environnement non contrôlé. Cet équipement doit être installé

et utilisé avec un minimum de 20cm de distance entre la source de rayonnement et votre corps.

This device and it’s antennas(s) must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with IC multi-tra

nsmitter product procedures.

Cet appareil et son antenne (s) ne doit pas être co-localisés ou fonctionnement en association avec une autre antenne ou transmetteur.

This product meets the applicable Innovation, Science and Economic Development Canada technical specifications.

Le présent produit est conforme aux spécifications techniques applicables d’Innovation, Sciences et Développement économique Canada.

Fanvil Technology Co., Ltd

Website: www.fanvil.com

EMail: [email protected] [email protected]

Tel: +86-755-2640-2199 Fax: +86-755-2640-2618