Sony SRS-WS1 Operating Instructions Manual

Taper
Operating Instructions Manual
SRS-WS1
Operating Instructions
US
Manuel d’instructions
FR
Manual de instrucciones
ES
Wearable Neck
Speaker /
Haut-parleur sans fil
portable /
Bocina Estilo Collar
2
Table of Contents
What you can do with the speaker ....................................................... 3
Checking the supplied items ................................................................. 3
Preparation ....................................................................... 4
Setting up the transmitter ..................................................................... 4
Charging the speaker ......................................................... 5
Playing the TV’s audio through the speaker ...................... 6
Changing the settings ....................................................... 8
Adjusting the vibration level .................................................................. 8
Turning off the operation tone .............................................................. 8
Turning off the automatic power shutdown function .......................... 9
Alternative ways of using the speaker ............................. 10
Connecting the transmitter using the audio cable ............................. 10
Connecting the speaker directly using the dedicated audio cable .... 11
Connecting a second speaker .............................................................. 11
Troubleshooting ............................................................... 12
Steps to take when in trouble ............................................................. 12
About this product ........................................................... 15
Parts and Controls ................................................................................ 15
Specifications ........................................................................................ 16
Maintenance ......................................................................................... 16
Before operating the unit, please read this guide thoroughly and retain it for future reference.
Owner’s Record
The serial number is located on the left side of the Speaker.
Record the serial number in the space provided below. Refer to them whenever you call upon your
Sony dealer regarding this product.
Model No. SRS-WS1
Serial No.
3
US
What you can do with the speaker
You can start using this unit by connecting the transmitter to the TV with the supplied
digital optical cable.
Simply place the speaker on your shoulders and you can enjoy realistic sound and
dynamic vibration. You can enjoy the real atmosphere of movies, games or music
videos.*
* Maximum range: Line of sight approx. 30m (with 1 set of speaker connected)/
10m(with 2 sets connected).
Checking the supplied items
Contact your dealer immediately if any of these items are missing.
The number in ( ) is the quantity of items supplied.
Speaker (1)
Transmitter (1)
Charging cradle (1)
AC adapter (2)
Micro USB cables (2)
Digital optical cable (1)
Audio cable (1)
Dedicated audio cable (1)
Operating Instructions (this booklet) (1)
Safety and Regulatory Booklet (1)
Warranty (1)
4
Setting up the transmitter
1
Connect the transmitter to the TV and the power outlet
Connect the transmitter and an adapter using the micro USB cable and plug the AC adapter into
the AC outlet.
If your TV is equipped with a digital optical output terminal, connect the transmitter and the TV
using the digital optical cable.
To the AC outlet
AC adapter
(supplied)
Transmitter
TV
Insert the cable till
you hear a click
Micro USB cable (supplied) Digital optical cable (supplied)
If your TV is not equipped with a
digital optical terminal
Connect the transmitter and the TV using
the audio cable. See “Connecting the
transmitter using the audio cable” (page 10).
2
Set the TV’s digital audio output to PCM (Pulse Control Modulation)
Change the setting to PCM in advance. The digital optical input signals are only compatible with
48 kHz linear PCM. The sound may not output properly if the digital audio output on the TV is set
to any setting other than PCM.
For details, refer to the operating instructions of the TV.
Example: if using a Sony TV (the settings may vary depending on the model)
Set [Settings] – [Display & Sound] – [Audio output] – [Digital audio out] - [PCM] or [Settings] –
[Sound] – [Digital audio out] - [PCM].
Preparation
5
US
Before using the speaker for the first time, make sure to
charge it.
If you have not charged the unit, it may not turn on.
1
Connect the charging cradle to the
AC outlet
Connect the charging cradle and an AC adapter
using the micro USB cable and plug the AC
adapter into an AC outlet.
To an AC outlet
AC adapter
(supplied)
Micro USB cable (supplied)
Charging cradle
2
Place the speaker on the charging
cradle
The indicator on the charging cradle lights up in
orange and the power indicator on the speaker
flashes slowly when the speaker is charging.
When charging is complete, the indicator on the
charging cradle and the power indicator on the
speaker will turn off.
The speaker cannot be used while it is charging.
Colors of power indicator and what they
indicate
The color of the power indicator on the speaker
changes depending on the remaining battery level.
Green: Approximately more than 4 hours remaining
Yellow: Approximately 2 to 4 hours remaining
Red: Approximately less than 2 hours remaining
Power
indicator
Indicator
Place the speaker and align dots to the
convex of the charging cradle.
“•”
Hints
The speaker can also be charged through the INPUT terminal
of the speaker.
Connect the speaker and an AC adapter using the micro USB
cable and plug the AC adapter into the power outlet.
The speaker cannot be used when it is charging.
INPUT terminal
Charging the speaker
6
1
Turn on the speaker
Lift the speaker from the charging cradle and
press the power button. The power indicator
lights up in green when turned on.
The power indicator changes its color in a few
seconds to indicate the remaining battery level
(page 5).
Power button
Power indicator
2
Turn on the TV
You should hear sound from the speaker and feel
it vibrate.
3
Wear the speaker properly
Place the speaker on your shoulders in the right
direction.
Wear the speaker so
that the SONY logo
faces up as shown in
the figure.
4
Adjust the volume using the +/–
buttons
+: Increases the volume
–: Decreases the volume
Decrease
the volume
Increase
the volume
5
Turn off the power when you finish
using the speaker
To turn off the power, press and hold the power
button (for about 1 second).
The speaker turns off automatically in 15 minutes
once the TV has been turned off (auto turn off
function).
Power
button
Press and hold for
about 1 second.
If you cannot hear the sound from
the speaker
See “Steps to take when in trouble (page 12).
Playing the TV’s audio through the
speaker
7
US
4
Adjust the volume using the +/–
buttons
+: Increases the volume
–: Decreases the volume
Decrease
the volume
Increase
the volume
5
Turn off the power when you finish
using the speaker
To turn off the power, press and hold the power
button (for about 1 second).
The speaker turns off automatically in 15 minutes
once the TV has been turned off (auto turn off
function).
Power
button
Press and hold for
about 1 second.
If you cannot hear the sound from
the speaker
See “Steps to take when in trouble (page 12).
8
Adjusting the vibration level
1
Press the vibration button
Each time you press the vibration button, the
vibration level changes, and the number of the
vibration indicators also changes.
Indications of the vibration indicator and
the vibration level
None: Weak
1 light: Middle
2 lights: Strong
When you change the vibration level, it also
affects the sound tone.
Vibration button
Vibration indicator
Turning off the operation tone
1
Press and hold + button and – button
at the same time
You hear a sound when the setting is changed.
To turn on the operation tone, press and hold
+ button and – button at the same time.
+/– buttons
Press and hold both buttons for about
2 seconds.
Changing the settings
9
US
Turning off the automatic power shutdown function
This function helps to save energy by turning off the device when no sound is played
for the last 5 minutes.
1
Keep pressing the pairing button over
10 seconds.
Indicator blinks twice and turn off this function.
Pairing button
To turn on this function:
Keep pressing the pairing button and push reset
button with a sharp-edged Pen or the like.
Then indicator blinks twice and turn on this
function.
Changing the settings (continued)
10
Connecting the transmitter using the audio cable
If your TV is not equipped with a digital optical terminal or if you are already using a
device compatible with the digital optical cables, connect the transmitter to the
headphone terminal using the audio cable.
1
Connect the transmitter and the TV using the audio cable
AC adapter
(supplied)
To the AC outlet
Transmitter TV
Micro USB cable (supplied) Audio cable (supplied)
When the audio cable is connected to the headphone terminal, you hear no sound from the TV.
Depending on the TV, if you change the settings, you can also hear the sound from the TV at the
same time. For details, refer to the operating instructions of the TV.
When you hear some noise from the speaker
See “Steps to take when in trouble (page 14).
Alternative ways of using the speaker
11
US
Connecting the speaker directly using the dedicated audio
cable
You can also directly connect the speaker and another audio device using the supplied
dedicated audio cable.
1
Connect the supplied dedicated audio
cable to a device you wish to use
The auto turn off function will not work with this
condition.
Make sure that you always use the supplied
dedicated audio cable.
Dedicated audio cable (supplied)
Connecting a second speaker
You can connect up to 2 sets of speakers to the transmitter at once. Pair the speakers
first if you are using them for the first time with this unit.
To pair the speakers again, follow the steps below.
You cannot pair the speakers with devices other than this transmitter (such as
Bluetooth devices).
1
Set the speaker to the pairing mode
Turn on the speaker, press and hold the vibration
button (for 5 seconds or longer) till the power
indicator starts flashing in yellow.
Pair the speaker near the transmitter.
Vibration
button
Press and hold for
5 seconds or longer.
Power indicator
2
Press the pairing button located on
the bottom of the transmitter
Press the pairing button while the power indicator
on the speaker is flashing in yellow.
When pairing is completed, the indicator stops
flashing and lights up.
Pairing button
Alternative ways of using the speaker
(continued)
12
1
Read this booklet
Look for the relevant item in “Steps to take when in trouble (below).
3
If the problem still persists
Contact a Sony sales representative or repair service.
2
Check the website support
You will find the latest support information and detailed
problem-solving methods.
URL: https://www.sony.com/electronics/support
Model name: SRS-WS1
Steps to take when in trouble
You cannot hear
the sound.
(The indicator on
the transmitter
lights up in
yellow.)
Symptoms
You cannot hear
sound.
(The indicator on
the transmitter
lights up in red or
does not light
up.)
The TV setting is
incorrect (when
connected with the
digital optical cable).
Possible causes
The cable is not fully
inserted.
Connections are
incorrect.
The TV volume is set to
minimum.
Make sure that the digital audio output
setting on the TV is set to linear PCM (page
4). For setting methods, refer to the
operating instructions of your TV.
Countermeasures
Reconnect the TV and the transmitter (page
4). Fully insert the cable.
Increase the volume on the TV.
Troubleshooting
13
US
You cannot hear
the sound.
(The indicator on
the transmitter
lights up in
yellow.)
You cannot hear
the sound.
(The indicator on
the transmitter
lights up in
green.)
The speaker and the
transmitter are not
paired.
The battery is low.
The signals are not
being received.
If the power indicator on the speaker is
flashing in green, it may be because the
speaker is not paired.
See “Connecting a second speaker”
(page11).
Power indicator
Charge the speaker (page 5).
Reset the speaker and the transmitter.
Press the reset button located on the bottom
of the transmitter with a sharp-edged pen or
the like.
Press the power button and vibration button
on the speaker at the same time.
Press these
together
The transmitter is
connected to an AV
amplifier or a home
theater system with the
digital optical cable.
Make sure that the audio output setting is
set to linear PCM (page 4), or use the
supplied audio cable (page 10).
Troubleshooting (continued)
14
The sound is
interrupted.
You cannot hear
the sound.
(The indicator on
the transmitter
lights up in
green.)
The power turns
off automatically.
The volume is
low.
You can hear
some noise.
The speaker volume is
set to the minimum.
No sound detection
function is sometimes
working.
Auto turn off function is
working.
The headphone volume
on the TV is low.
The contact of the
headphone terminal on
the TV is poor.
Other radio waves are
interfering.
Increase the volume on the speaker (page
7).
Try to turn off no sound detection function
(page 9).
Using the audio cable, if you hear no sound
or little sound for 10 minutes or longer, the
speaker turns off automatically. The
indicator on the transmitter lights up in red.
Adjust the headphone volume on the TV.
To find out how to adjust the headphone
volume, refer to the operating instructions
of the TV.
Make sure that the audio cable is fully
inserted into the headphone terminal on
the TV. Inserting and removing the audio
cable a few times may make the
connection better.
Keep the distance from wireless devices or
microwave ovens as much as you can.
The sound may be interrupted if a
smartphone or tablet is near by because it
is transmitting and receiving signals even
when its screens is turned off.
If the speaker is interfering with other
wireless connections (such as TV or sound
bar speakers), move the transmitter around
(e.g. if the transmitter is placed on the left
hand side of the TV, move it around to the
right hand side).
15
US
About this product
Parts and Controls
The numbers in ( ) below are the related page numbers.
Speaker
Vibration button (8) Power indicator (5, 6)
Vibration indicator (8)
+/– button (7)
INPUT terminal
(5, 10)
Power button (6)
Transmitter
DC IN terminal (4)
Indicator
Pairing button (10)
Reset button (12)
DIGITAL IN terminal (4)
ANALOG IN terminal (9)
Indicators on the transmitter
Lights up (Green): The audio is being sent to the speaker.
Lights up (Red): The audio is not being sent to the speaker.
Lights up (Yellow): The audio is not being sent to the speaker.
(When the digital audio output setting on the TV is not set to PCM.)
None: The power is not turned on.
Charging cradle
Charger terminal (5)
DC IN terminal
(5)
Indicator (5)
16
Specifications
Speaker
Types
Speaker system with built-in amplifier
Practical maximum output
1 W + 1 W*
Speaker unit
φ30 mm × 2 (full range)
Input terminal
Stereo mini jack (used with the supplied cable)
Power
Lithium ion battery
Continuous play time (Approx.)
7 hours*
Required charging time (Approx.)
3 hours*
Operating temperature range
0 °C to 40 °C
Dimensions
(width/height/depth) (Approx.)
210 mm × 75 mm × 205 mm
Mass (Approx.)
335 g
*
These may vary depending on the environment.
Charging cradle
Power
DC 5 V (with the supplied AC adapter)
Dimensions
(width/height/depth) (Approx.)
76 mm × 17 mm × 45 mm
Mass (Approx.)
70 g
Transmitter
Modulation method
Other methods
Frequency band
2.4 GHz band
Maximum communication range
Line of sight approx. 30 m (with 1 set of
speaker connected)/10m (with 2 sets
connected)
Input terminal
1 stereo mini jack, 1 optical audio input
terminal (square shape) (only for fs = 48 kHz
PCM)
Power
DC 5 V (with the supplied AC adapter)
Dimensions
(width/height/depth) (Approx.)
76 mm × 17 mm × 45 mm
Mass (Approx.)
30 g
Design and specifications are subject to change
without notice.
Maintenance
Before liquid enters the speaker, lightly pat it with a soft dry cloth or a cloth that has
been soaked in water or warm water and wrung dry.
Depending on the type of stain, you may not be able to remove it.
2
Table des matières
Ce que vous pouvez faire avec l’enceinte ............................................. 3
Vérification des articles fournies ............................................................ 3
Préparation ....................................................................... 4
Réglage de l’émetteur ........................................................................... 4
Charge des enceintes ......................................................... 5
Lecture du son du téléviseur sur les enceintes .................. 6
Modification des réglages ................................................. 8
Réglage du niveau de vibration ............................................................ 8
Désactivation de la tonalité de fonctionnement .................................. 8
Désactivation de la fonction de mise hors tension automatique ........ 9
Différentes façons d’utiliser les enceintes ......................... 10
Connexion de l’émetteur en utilisant le câble audio .......................... 10
Connexion des enceintes directement en utilisant le câble
audio dédié ........................................................................................... 11
Connexion d’une seconde paire d’enceintes ....................................... 11
Dépannage ...................................................................... 12
Procédure à suivre en cas de problèmes ............................................ 12
À propos de ce produit ..................................................... 15
Pièces et commandes .......................................................................... 15
Spécifications ........................................................................................ 16
Entretien ............................................................................................... 16
Avant de faire fonctionner l’appareil, lisez attentivement ce guide et conservez-le pour toute
référence ultérieure.
Fiche d’identification
Le numéro de série est situé sur le côté gauche de l’enceinte.
Inscrivez le numéro de série dans l’espace ci-dessous. Faites-y référence chaque fois que vous
appelez votre détaillant Sony au sujet de ce produit.
Modèle No SRS-WS1
N° de série
3
FR
Ce que vous pouvez faire avec l’enceinte
Vous pouvez commence à utiliser cet appareil en connectant l’émetteur au téléviseur
avec le câble optique numérique fourni.
Placez simplement l’enceinte sur vos épaules et profitez d’un son réaliste et de
vibrations dynamiques. Vous pouvez profiter de l’atmosphère réelle des films, des jeux
ou des vidéos musicales.*
* Plage maximum: Ligne de vue d’environ 30m (avec une paire d’enceintes
connectée)/ 10m (avec deux paires d’enceintes connectées).
Vérification des articles fournies
Contactez immédiatement votre revendeur si un de ces articles manquait.
Le nombre entre les ( ) correspond à la quantité d’articles fournis.
Enceintes (1)
Émetteur (1)
Station de chargement (1)
Adaptateur CA (2)
Câbles USB micro (2)
Câble optique numérique (1)
Câble audio (1)
Câble audio dédié (1)
Manuel d’instructions (cette brochure) (1)
Feuillet de consignes d’utilisation et de sécurité (1)
Garantie (1)
4
Réglage de l’émetteur
1
Connectez l’émetteur au téléviseur et à une prise secteur
Connectez l’émetteur à l’adaptateur CA en utilisant le câble USB micro et branchez l’adaptateur CA
sur la prise secteur murale.
Si votre téléviseur est muni d’une prise de sortie optique numérique, connectez l’émetteur au
téléviseur en utilisant le câble optique numérique.
À la prise secteur
Adaptateur CA
(fourni)
Émetteur
TV
Insérez le câble
jusqu’à ce que vous
entendiez un clic
Câbles USB micro (fourni) Câble optique numérique (fourni)
Si votre téléviseur n’est pas muni
d’une prise optique numérique
Connectez l’émetteur au téléviseur en
utilisant le câble audio. Reportez-vous à
«Connexion de l’émetteur en utilisant le
câble audio» (page 10).
2
Réglez la sortie numérique du téléviseur sur PCM (Modulation par
impulsions contrôlées)
Changez le réglage sur PCM en avance. Les signaux de l’entrée optique numérique sont
uniquement compatible avec 48 kHz PCM Linéaire. Le son peut ne pas sortir correctement si la
sortie audio numérique du téléviseur est réglée sur autre chose que PCM.
Pour les détails, reportez-vous au manuel d’instructions du téléviseur.
Exemple: lors de l’utilisation d’un téléviseur Sony (les réglages peuvent varier en fonction du modèle)
Réglez [Paramètres] – [Affichage et audio] – [Sortie audio] – [Sortie audio numérique] - [PCM] ou
[Paramètres] – [Son] – [Sortie audio numérique] - [PCM].
Préparation
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48

Sony SRS-WS1 Operating Instructions Manual

Taper
Operating Instructions Manual

dans d''autres langues