Lego 75159 Star Wars Building Instructions

75159

TM

2

1

3

4

LEGO.com/brickseparator

2

LEGO

®

Star Wars

started in 1999 and we have been making new models

for the product line every year since then. The LEGO

Star Wars

design team

consists of eight model designers and four graphic designers. The team is

a mix of brand new designers with new, fresh ideas and experienced LEGO

Star Wars

designers with many models under their belts.

This is an ideal team for creating new, innovative LEGO

Star Wars

models, as well as revising and improving previous

LEGO versions of classic and iconic

Star Wars

ships. The focus

of our main LEGO

Star Wars

product line is to make cool, fun,

and inspiring LEGO

Star Wars

models for children.

With LEGO Direct, we have the opportunity to make even bigger, more

challenging models with special attention to accuracy and details. These

models are fun and exciting to develop, as well as a huge challenge! We

always do our very best, and hope you will enjoy building them.

Happy building!

Jens Kronvold Frederiksen

Design Director, LEGO

®

Star Wars

™

About the LEGO

®

Star Wars

™

Design Team

3

4

About the Death Star

The ultimate weapon of terror, the DS-1 Orbital Battle Station colloquially known as the Death

Star, became one of the most eective weapons in the arsenal of the Galactic Empire. Prior to

its eventual destruction by the Rebel Alliance led by the young Jedi Luke Skywalker, the Death

Star earned its infamy by crushing resistance through sheer size and might, as well as the total

destruction of Leia Organa’s homeworld, Alderaan.

Supreme Chancellor Palpatine, with assistance from the Geonosians, plotted to build the ﬁrst

dreaded Death Star – a weapon unlike anything the galaxy had ever seen. Palpatine, secretly the

Sith Lord Darth Sidious, had his apprentice Darth Tyranus (also known as Count Dooku) deliver the

plans from Geonosis to Coruscant at the start of the Clone Wars. The Death Star secretly took

shape in space above Geonosis. Access to the former Separatist world was restricted, with very

few in the Imperial hierarchy allowed to know about the battle station’s construction.

The Empire appointed Wilhu Tarkin to oversee the project. Tarkin proved a capable commander,

and Palpatine rewarded him by making him a Grand Mo with greater control over the project.

Tarkin would become the battle station’s greatest champion, seeing it as the key to vanquishing all

resistance to Palpatine’s rule.

The Death Star’s downfall began with Leia Organa rescuing a series of blueprint layouts and

plans for the Death Star, and realizing the importance of the plans’ survival, placed them inside

Astromech droid R2-D2 who, along with his companion C-3PO, were purchased by Owen Lars from

scavenging Jawas. Located by Luke Skywalker, and later Obi-Wan Kenobi, the plans inside R2-D2

were key in the Rebel Alliance’s discovery of the Death Star’s one major weakness: an exhaust

shaft that led directly into the Death Star’s main reactor.

Death Star Facts

Manufacturer Imperial Department of Military Research

Sienar Fleet Systems

Model DS-1 Orbital Battle Station

Class Deep-space mobile battle station

Technical Speciﬁcations – DS-1 Orbital Battle Station

Diameter 160 kilometers

Armament Concave Dish Composite Beam Superlaser

Taim & Bak D6 turbolaser batteries (5,000)

Taim & Bak XX-9 heavy turbolasers (5,000)

SFS L-s 4.9 laser cannons (2,500)

Borstel MS-1 ion cannons (2,500)

SB-920 laser cannons

Phylon tractor beam generators (768)

Charged-particle blasters

Magnetic railguns

Proton torpedo banks

Surface cannon

Engine Unit Sepma 30-5 sublight engines

Crew Full-time crew members (342,953)

Ocers (27,048)

Troops (607,360)

Pilots (167,216)

Support and maintenance crew (285,675)

Support droids (400,000)

Stormtroopers (25,984)

Gunners (57,278)

Starship support sta (42,782)

Cargo capacity over 1 million kilotons

This weakness was exploited by Luke Skywalker who piloted an X-wing down to the surface of

the Death Star, and utilizing the Force, ﬁred two proton torpedoes down into the exhaust shaft,

destroying the Death Star entirely. This proved to be a decisive victory for the Rebel Alliance, and

not long after, thousands of star systems began to align with the Alliance. Unbeknownst to the

Rebels however, Emperor Palpatine had ordered the construction of a second Death Star only days

prior to the ﬁrst’s destruction.

Facts/Speciﬁcations

6

Droid Repair Center

Littered with spare

parts and advanced

machinery, the Droid

Repair Center is where

droids aboard the Death

Star are maintained

and ﬁxed as well as

upgraded and improved.

Emperor’s Throne Room

When Luke Skywalker was

captured he was brought

to the second Death

Star’s throne room, where

Palpatine tried to convert

the young Jedi to the dark

side of the Force. When

he refused to join the

Sith, Emperor Palpatine

used Skywalker’s anger to

instigate a duel between

Darth Vader and Luke

Skywalker in the

throne room.

Rotating Turbolaser Turret

Air Duct

Storage Bay

Central Turbolift Shaft

Cargo Bay

Central Core Shaft

The Central Core Shaft

houses the Death Star’s air

shaft and central turbolift

shaft. Luke Skywalker and

Princess Leia Organa used

a grappling hook to swing

across the chasm inside

this room during

Leia’s rescue.

Docking Bay 327

One of many hangars

in the Death Star that

are used to store ships

that have been dragged

in via the Death Star’s

tractor beam.

Death Star Compartments

Superlaser Firing Dish

Rotating Turbolaser

Turret

Superlaser Fire Control Room

This chamber in Theta Sector of

both Death Stars is where the

superlaser controls are situated.

Conference Room

This is where leaders

of the Galactic Empire

would meet aboard

the Death Star, and is

also where Darth Vader

choked Admiral Motti.

Trash Compactor 3263827

Upon freeing Princess Leia

Organa from the original Death

Star’s detention level, Han Solo,

Chewbacca and Luke Skywalker were

temporarily stranded inside this trash

compactor along with the princess. They

were attacked by a carnivorous dianoga,

and nearly died when the compactor’s walls

started to close in to compress the waste it

contained. C-3PO and R2-D2, who had remained

behind in safety however, managed to disable all

trash compactors on the detention level of the Death

Star and save their lives.

Security Camera

Level 6 Core Shaft

Corridor

The Level 6 Core Shaft

Corridor is a walkway

across the tractor beam

power generator trench on

the Death Star. It was here

that Obi-Wan Kenobi took

out Docking Bay 327’s

tractor beam, ultimately

allowing the Millennium

Falcon to ﬂee.

Cell 2187

Cell 2187 in Detention

Block AA-23 was where

Princess Leia Organa

was imprisoned by Darth

Vader for suspected

Rebel activities.

Tractor Beam

Reactor Coupling

Q: Is there a speciﬁc feature of the model that you enjoyed designing the most?

A:Well the spring-loaded-missile-shooting turbolaser on the lower ﬂoor was really fun to design,

because that was my design from the ground up. I also came up with a new trigger function

for the shooter, so I’m really proud of that part. Besides that, I really like my small tweaks to the

turbolasers on the top ﬂoor. I love the turbolaser towers in the attack run from “

Star Wars

:

A New Hope”, so putting my ﬁngerprint on those was awesome.

Q: What is dierent about this version of the LEGO

Star Wars

Death Star set from the

previous incarnation?

A: A couple of major improvements have been made to the hangar bay elevator, planet killer

laser, turbolaser and Darth Vader’s TIE X-1 Advanced. Besides that, a lot of small, more subtle

changes have been made throughout the entire battle station.

Meet the Model Designer

Q: The LEGO

®

Star Wars

Death Star is one of the most recognizable battle stations

from the entire

Star Wars

canon. Known for its iconic round shape, how did you begin

designing this model?

A:I started by looking into what was great about the last incarnation of the Death Star, and

which areas could be updated. I especially looked at the dierent functions to see if they

could be improved. Besides that, I really dived into the overall building experience and how this

could be improved, to ensure that building this set will be a great experience for everybody.

Q: What kind of reference material did you use to begin designing the Death Star?

A: I used the two movies featuring both Death Stars (“

Star Wars

: A New Hope” and

“

Star Wars

: Return of the Jedi”), plus all the screenshots I could make or ﬁnd to

get an overview of the rooms and scenarios.

Q: What kind of building techniques do you frequently use when designing a model

of this scale?

A: Stability is always an important feature for us when we design the models, but especially for

models this size the emphasis is on stability, simply because of the weight and size of the model.

In this set there’s a lot of stacking bricks, so it’s super important that both the walls and ﬂoors

are stable. This ensures that the model is stable during the build phase and also afterwards when

being played with.

Q: One of the best features of the LEGO

Star Wars

Death Star are the rooms on the interior

of the model. How did these factor into your design process when creating a model that needs

to be functional while remaining stable?

A:The rooms were very much given from the last incarnation of the model – however, I did

work with optimizing the walls and ﬂoors for a better build ﬂow. Securing stable walls and

ﬂoors are key here, because once you start adding functions in or through walls or ﬂoors,

you often remove stability. So ensuring that the model doesn’t get any weak spots (like exhaust

ports) while adding lots of playable functions is really important and a big part of the challenge

of designing a model like this.

Niels Mølgård Frederiksen

8

As I designed the new dianoga, I got the idea of adding playability to the trash compactor room. By

making a hole in the ﬂoor, the dianoga could peek up through as if it was submerged in the muddy

water. That task did present some challenges but I’m quite fond of the end result and hope it will

add lots of fun to that scenario. Besides that, I’ve made changes in the building ﬂow and improved

the building experience.

Q: Was there anything unique about designing the round surface of the Death Star while

accommodating the planet killer laser?

A:I managed to add more articulation to the planet killer laser in comparison to the previous

incarnation. So yes, I of course had to be aware of the conﬁnements, so the planet killer laser’s

disc wouldn’t hit the walls and ﬂoors of the Death Star.

Q: What did you ﬁnd most challenging about the design for the Death Star?

A: It was probably redesigning Vader’s TIE X-1 Advanced to accommodate the Darth Vader

miniﬁgure with the new two-piece helmet. The TIE vehicle went through numerous iterations before

I had a model where I was satisﬁed with the design, stability, and building experience.

Q: Was there anything in your original design that was not included in the ﬁnal set?

A: No, actually not. Well, minor changes from my original sketches and iterations,

but nothing major was left out.

10

Meet the Graphic Designer

Q: What LEGO

®

Star Wars

miniﬁgures have you designed?

A:This would be a very long list, but I will give a few personal highlights: I have designed all

kinds of cool armored troops, including all Clone Troopers, Imperial Stormtrooper, Sandtrooper,

Scout Trooper, Stealth Trooper and Snowtroopers. I especially enjoyed creating the First Order

Stormtrooper, Flametrooper, TIE Fighter pilots, and the Imperial AT-AT pilot. I also did lots of

Ocers and Crewmen, both Imperial and Rebel. I have designed almost all the Old Republic

miniﬁgures, including the unique Jedi Knights and Sith Warriors; then I have done lots of

Astromech and Protocol droids, many aliens and bounty hunters, and of course many heroes

ranging from Padmé and Anakin to Hera and Kanan, and sometimes new characters like JEK-14.

Q: What kind of reference material did you use to begin designing the decorations for

LEGO

Star Wars

miniﬁgures?

A: We get a lot of reference material from our partners at Lucasﬁlm, from the ﬁrst concept

sketches to the ﬁnal costumes and props. And of course we use the movies and our knowledge

of the characters in order to get across their personality!

Q: What are some of the challenges you face when designing art for a small surface like

a LEGO miniﬁgure?

A: I always try to capture as many details as possible from the amazing originals, but at the same

time keep the design on the miniﬁgures as clear as possible. Especially on the miniﬁgure torsos,

you should be able to understand the overall shape, what main objects are there or how things are

layered from relatively far away. Then there are some smaller details to discover once you take

a closer look!

Jakob Liesenfeld

Q: The LEGO

Star Wars

Death Star encompasses many dierent scenes from multiple

Star Wars

movies. How did you begin design work on characters like Luke Skywalker

and Han Solo who appear more than once in the set in dierent outﬁts?

A:To be honest, we have had the main characters’ looks established before; so we mostly used

existing designs, although we did do a badly-needed update for Leia’s classic white outﬁt. And of

course we were ﬁnally able to create a proper hairpiece for Han Solo!

Jakob Liesenfeld

Q: What is your method for determining which details are important enough to be included

in the ﬁnal design of a miniﬁgure deco, and which details can be simpliﬁed?

A:Normally we look for the most iconic parts of a costume. Of course for many fans every detail

is important, and we are big

Star Wars

fans in the team! We often simplify details that would get

too small, or when we need to adapt the human proportions to the ones of the miniﬁgure. The

Stormtrooper for instance has a very short belly, to properly show the bulk and form of the chest

armor and belt.

Q: Is there a part of the design process that you enjoy most?

A: While I really enjoy solving all the little problems along the way, I think that what I like the most

are the very big ideas at the start, when we make the decisions about which characters to include

and how to approach them. It is also great to look back at the humble beginnings at the end, when

I am holding the ﬁnal prints in my hand.

Q: How do you begin to create your ﬁrst initial design when you start a new project?

A: At the start, I would usually do a hand sketch. This helps determine what to focus on and what

to leave out, as I mentioned earlier. After that I will work on top of it using vector graphics, and

match important lines as closely as possible to the reference.

Q: Which miniﬁgure in this set did you ﬁnd most challenging to design and why?

A: This would once again be the Stormtrooper. With this super-iconic design you just have to get

it right. Especially the helmet proved to be quite a challenge, since the element itself is of an older

generation and full of sculpted details that can conﬂict with the printing. The wonderful people in

our print department had to endure many loops, until we ﬁnally found the right placement and

distortion to ensure that every detail would land in the right place on the ﬁnal piece!

Meet the Art Director

Q: What are you responsible for as an art director working on packaging for

LEGO

®

Star Wars

?

A:Our roles are sort of a combination of an art director and graphic designer. Essentially we’re

responsible for making the packaging look as cool as it possibly can! I’ll work with several dierent

artists who help me create dierent assets – everything from the box’s background image to the

overall design elements on the packaging. My job is to piece together all of those dierent assets

and create the ﬁnal box art. We often take a team approach to our work on LEGO

Star Wars,

and I wouldn’t be able to do the best job I can without the rest of the group. Our team is always

growing and changing, but I want to give a special thanks to John McCormack, Mike Swiatlowski,

Jake Blais, Mike Sion, Sara Gomes, and Peter Cangialosi for being the best team I could

imagine… thanks for all your help!

Q: The LEGO

Star Wars

Death Star is a huge model with multiple rooms, features, and

functions. How did you begin the design process for the box art while taking into account all

the details that needed to be included?

A:We’re lucky enough to have a good template from the previous version of the packaging, and

I’d like to thank Rob Johnson for giving us a great starting blueprint! As with all packaging, we

begin our designs based on a brief we receive from our marketing team. The marketers give

us suggestions for which elements of the model that they would like to focus on. From there we

go into our ﬁrst layout phase. We try to make the marketer’s requests come to life in the most

creative ways we can, and also give them some alternative options that we put forward ourselves.

The box goes through several rounds of design changes based on feedback from the marketing

team and our partners until we have all agreed on the ﬁnal design.

Q: What kind of reference material do you use to begin designing the package art?

A:In general, we use lots of dierent materials ranging from images taken directly from the

movies, to any kind of things that we ﬁnd visually inspiring. One day it might be an awesome

poster, the next day it might be a pattern in your morning bowl of cereal... you never know

where inspiration will strike! Also, our partners at Disney and Lucasﬁlm have awesome websites

available to us that are ﬁlled with images from the

Star Wars

universe. These websites have tons

of behind-the-scenes shots, movie stills, posters, concept art, 3D assets... pretty much anything you

can imagine. It’s by far my favorite place to look for reference material!

William Colburn Jr.

Q: What kind of challenges do you face when designing art that will be speciﬁcally used for

packaging design? Is designing package art for smaller sets dierent from designing package

art for larger sets like the Death Star?

A:The biggest challenge is trying to ﬁgure out how to ﬁt everything that comes in the box onto

the front of the box without interfering with our logos, product information, and legal text. With

the Death Star, it’s been a bit easier because it’s one large model and all of the miniﬁgures

are contained in the model itself. Typically we have several smaller pieces, vehicles, and multiple

miniﬁgures, so it can turn into quite a puzzle trying to ﬁt everything in... especially on the smaller

boxes! I ﬁnd the puzzle can be challenging at times, however it can be the most rewarding aspect

of the design when you are able to tell a fun story and show o all of the included models and

miniﬁgures at the same time.

12

Q: Were there certain details about this set that were important to you to feature in the

packaging art?

A:I really wanted to showcase all of the little details that the model designers included. This is one

of the biggest sets in our LEGO

®

Star Wars

assortment, but it’s essentially made up of a bunch of

smaller rooms with all sorts of references to the movies. I especially love the new addition in the

trash compactor room that allows the dianoga to stick its head up through the ﬂoor!

Q: The scenes that take place within the Death Star are seminal moments in the

Star Wars

movies. How did you decide which scenes to recreate for the packaging art?

A: We tried to recreate as many scenes as we could for the packaging. However, since the Death

Star has so many rooms, it wasn’t possible to include every scene we wanted, so we tried to stick

with the most iconic and memorable scenes that we could. Most are references from “Episode IV:

A New Hope” though my favorite one might be the Lightsaber duel between Darth Vader and Luke

Skywalker in the Emperor’s throne room from “Episode VI: Return of the Jedi”.

Q: What do you enjoy most about the design process?

A: By far my favorite part of the design process is ﬁnal photography. In the digital age, a lot of

companies have transitioned over to using 3D renders for their packaging; however we still shoot

photos of the actual product. I have a background in photography, so getting to go to these photo

shoots is a very fun time for me. With all the gear and camera equipment around, I feel like a kid

in a candy store! It can get hectic, as there are a lot of things going on all at once, but the team

at Atwater Studios make it an awesome experience. Thanks to Joey, Tim, and Victor for all of your

help over the years!

14

Princess Leia

Princess of the planet Alderaan and

Rebel Alliance sympathizer, Leia was

held captive aboard the Death Star

before her rescue by Han Solo and

Luke Skywalker.

Death Star Droid

Mechanical beings that

often possessed artiﬁcial

intelligence, droids were

often given jobs too

dangerous or too dicult for

their human counterparts.

Luke Skywalker

(disguise)

Disguised as a

Stormtrooper, Luke

Skywalker inﬁltrated

the Death Star with

the help of his friend

Han Solo to rescue

Princess Leia.

Luke Skywalker (Tatooine)

An apprentice Jedi to Master

Obi-Wan Kenobi, Luke Skywalker

proved to be a leading member of

the Rebel Alliance, destroying the

Death Star by using the Force to

guide his aim.

Chewbacca

Han Solo’s copilot

and best friend,

Chewbacca helped

Luke and Han stage

the daring rescue of

Princess Leia Organa.

Imperial Astromech

Imperial Astromechs

were extremely ﬂexible

and ecient and could

often be found on the

battleﬁeld.

Han Solo (disguise)

Sneaking on board

the Death Star

by posing as a

Stormtrooper with

Luke, Han Solo was

able to ﬁnd and

rescue Princess Leia.

Han Solo

Pilot of the Millennium Falcon

and a well-known smuggler,

Han Solo became a key part

of the Rebel Alliance.

R2-D2

Astromech droid

R2-D2 was instrumental

in delivering the Death

Star blueprints to the

Rebel forces.

C-3PO

Protocol droid built by

young Anakin Skywalker.

His quick reactions aboard

the Death Star prevented

Luke and friends from

being crushed in the

trash compactor.

Grand Mo Tarkin

Ordered the destruction

of Princess Leia’s

home planet Alderaan.

He also placed a

tracking beacon on the

Millennium Falcon to ﬁnd

the Rebel base.

Imperial O cer

These ocers were

skilled and intelligent

soldiers who worked

their way up the chain

of command aboard

the Death Star.

Imperial

Navy O cer

These soldiers

were higher-

ranking ocials

serving on board

the many ships of

the Imperial Fleet.

Obi-Wan Kenobi

As a Jedi Master and

Luke Skywalker’s mentor,

Obi-Wan Kenobi was a

formidable ally against the

Galactic Empire.

Darth Vader

Loyal to the Galactic Empire,

Darth Vader tortured Princess

Leia aboard the Death Star

into revealing the location

of the Rebel base. He later

severed Luke’s hand in a

lightsaber duel.

Death Star Gunner

Member of the Imperial

Navy’s Starﬁghter Corps

with lightning-fast

reﬂexes.

Luke Skywalker

(ﬁnal duel)

After learning that Vader

was actually his father,

Anakin Skywalker, Luke

returned to the second

Death Star to defeat Vader

and the Galactic Empire.

Emperor Palpatine

Leader of the Galactic

Empire, but behind closed

doors he was in reality,

Darth Sidious, the Dark

Lord of the Sith who sought

to control the Galaxy.

Stormtrooper

The numerous ground troops

of the Galactic Empire were

well-trained soldiers, highly

eective in combat and

heavily armored.

Death Star Trooper

Elite Imperial Navy

troopers were specially

trained soldiers who

were deeply loyal to

Emperor Palpatine.

Character Overview

Emperor’s

Royal Guard

An elite unit of the

Galactic Empire,

tasked with the

protection of

Emperor Palpatine.

C-3PO

Imperial Astromech

Luke Skywalker

Darth Vader

Stormtrooper

their human counterparts.

Death Star Trooper

Luke Skywalker (Tatooine)

lightsaber duel.

LEGO

®

Star Wars

a commencé en 1999 et nous avons conçu chaque année depuis de nouveaux modèles pour

cette gamme de produits. L’équipe de design LEGO

Star Wars

est composée de huit créateurs de modèles

et de quatre graphistes. Cette équipe est un mélange de nouveaux designers avec des idées originales

et de designers LEGO

Star Wars

expérimentés ayant déjà créé de nombreux modèles.

Il s’agit de l’équipe idéale pour créer de nouveaux modèles LEGO

Star Wars

innovants et

pour améliorer les versions LEGO antérieures des célèbres

vaisseaux classiques

Star Wars

. L’objectif de notre gamme

principale de produits LEGO

Star Wars

est de créer des

modèles LEGO

Star Wars

cool, amusants et stimulants pour

les enfants.

Pour LEGO Direct, nous avons la possibilité de créer des modèles encore

plus grands et plus complexes, en prêtant une attention particulière à

la précision et aux détails. Ces modèles sont amusants et fascinants

à concevoir, mais ils constituent aussi un énorme déﬁ ! Nous faisons

toujours de notre mieux et nous espérons que tu apprécieras l’expérience

de construction.

Bonne construction !

Jens Kronvold Frederiksen

Directeur du design, LEGO

®

Star Wars

™

À propos de l’équipe de design LEGO

®

Star Wars

™

15

16

À propos de l’Étoile de la mort

L’arme de terreur suprême, la station de combat orbitale DS-1 connue sous le nom d’Étoile de

la mort, est devenue l’une des armes les plus redoutables dans l’arsenal de l’Empire galactique.

Avant sa destruction ﬁnale par l’Alliance rebelle, menée par le jeune Jedi Luke Skywalker, l’Étoile de

la mort a gagné sa terrible réputation en écrasant la résistance par sa taille et sa puissance, et en

assurant la destruction totale du monde de Leia Organa, Alderaan.

Le chancelier suprême Palpatine, avec l’aide des Géonosiens, a comploté pour construire la

première Étoile de la mort redoutée – une arme diérente de tout ce que la galaxie avait connu

jusqu’alors. Palpatine, secrètement le Seigneur Sith Darth Sidious, avait fait livrer par son apprenti

Darth Tyranus (également appelé Comte Dooku) les plans de Géonosis à Coruscant au début de la

Guerre des Clones. L’Étoile de la mort prit secrètement forme dans l’espace au-dessus de Géonosis.

L’accès à l’ancien monde séparatiste était restreint, et très peu de membres de la hiérarchie

impériale étaient autorisés à être informés de la construction de la station de combat.

L’Empire chargea Wilhu Tarkin de superviser le projet. Tarkin s’est révélé être un commandant

ecace, et Palpatine l’a récompensé en le faisant Grand Mo avec un plus grand contrôle sur le

projet. Tarkin allait devenir le plus fervent défenseur de la station de combat, la voyant comme la

clé pour vaincre toute résistance à la domination de Palpatine.

La chute de l’Étoile de la mort commença avec Leia Organa, qui se procura une série de plans et

de schémas de l’Étoile de la mort. Réalisant l’importance de préserver ces plans, elle les plaça dans

le droïde Astromech R2-D2 qui fut acheté, avec son compagnon C-3PO, par Owen Lars auprès des

Jawas pilleurs. Ayant localisé Luke Skywalker, puis Obi-Wan Kenobi, les plans à l’intérieur de R2-D2

furent essentiels pour que l’Alliance rebelle découvre le principal point faible de l’Étoile de la mort :

un conduit d’évacuation qui menait directement dans le réacteur principal de l’Étoile de la mort.

Informations sur l’Étoile de la mort

Fabricant Département impérial de recherche militaire

Systèmes de ﬂotte Sienar

Modèle Station de combat orbitale DS-1

Classe Station de combat mobile de l’espace

Caractéristiques techniques – Station de combat orbitale DS-1

Diamètre 160 kilomètres

Armement Superlaser à rayon composite concave

Batteries turbolaser Taim & Bak D6 (5 000)

Turbolasers lourds Taim & Bak XX-9 (5 000)

Canons laser SFS L-s 4.9 (2 500)

Canons ioniques Borstel MS-1 (2 500)

Canons laser SB-920

Générateurs de rayon tracteur Phylon (768)

Canons à particules chargées

Canons à rails magnétiques

Banques de torpilles à protons

Canon de surface

Moteurs Moteurs subluminiques Sepma 30-5

Équipage Membres d’équipage à temps plein (342 953)

Ociers (27 048)

Soldats (607 360)

Pilotes (167 216)

Équipe de soutien et d’entretien (285 675)

Droïdes de soutien (400 000)

Stormtroopers (25 984)

Artilleurs (57 278)

Personnel de soutien des vaisseaux (42 782)

Capacité cargo plus de 1 million de kilotonnes

Ce point faible fut exploité par Luke Skywalker qui pilota un X-wing sur la surface de l’Étoile de

la mort et, utilisant la Force, tira deux torpilles à protons dans le conduit d’évacuation, détruisant

entièrement l’Étoile de la mort. Ceci se révéla être une victoire décisive pour l’Alliance rebelle, et

peu après, des milliers de systèmes stellaires commencèrent à rejoindre l’Alliance. Les Rebelles

ignoraient cependant que l’Empereur Palpatine avait commencé la construction d’une seconde

Étoile de la mort, seulement quelques jours avant la destruction de la première.

Informations/caractéristiques

18

Centre de réparation des droïdes

Rempli de pièces détachées et de

machines sophistiquées, le centre

de réparation des droïdes est

l’endroit où les droïdes à bord de

l’Étoile de la mort sont entretenus,

réparés, actualisés et améliorés.

Salle du trône de l’Empereur

Lorsque Luke Skywalker fut

capturé, il fut emmené dans la

salle du trône de la deuxième

Étoile de la mort, où Palpatine

tenta de convertir le jeune Jedi

au côté obscur de la Force.

Quand Luke refusa de rejoindre

le Sith, l’Empereur Palpatine

utilisa la colère de Skywalker

pour provoquer un duel entre

Darth Vader et Luke Skywalker

dans la salle du trône.

Tourelle rotative à turbolaser

Conduit d’air

Compartiment de stockage

Conduit du turbo-ascenseur central

Compartiment cargo

Conduit du cœur central

Le conduit du cœur central

abrite le conduit d’air de

l’Étoile de la mort et le

conduit central du turbo-

ascenseur. Luke Skywalker

et la princesse Leia Organa

utilisèrent un grappin pour

se balancer au-dessus du

vide dans cette salle pendant

le sauvetage de Leia.

Compartiment

d’accostage 327

L’un des nombreux

hangars dans l’Étoile

de la mort utilisés pour

stocker les vaisseaux

qui ont été attirés par le

rayon tracteur de l’Étoile

de la mort.

Compartiments de

l’Étoile de la mort

Disque de tir du

superlaser

Tourelle rotative

à turbolaser

Salle de contrôle du superlaser

Cette salle du secteur Theta

des deux Étoiles de la mort

est l’endroit où sont situés les

contrôles du superlaser.

Salle de conférence

C’est l’endroit où les

chefs de l’Empire

galactique se

réunissaient à bord

de l’Étoile de la mort

et c’est aussi là que

Darth Vader a étranglé

l’Amiral Motti.

Compacteur de déchets 3263827

En libérant la princesse Leia

Organa du secteur de détention de

l’Étoile de la mort originale, Han Solo,

Chewbacca et Luke Skywalker furent

temporairement emprisonnés dans ce

compacteur de déchets avec la princesse. Ils

furent attaqués par un dianoga carnivore et

faillirent mourir lorsque les murs du compacteur

commencèrent à se refermer pour comprimer les

déchets qu’il contenait. C-3PO et R2-D2, qui étaient

restés en sécurité, réussirent à leur sauver la vie

en désactivant tous les compacteurs de déchets du

secteur de détention de l’Étoile de la mort.

Caméra de sécurité

Couloir du conduit central

du niveau 6

Le couloir du conduit

central du niveau 6 est une

passerelle sur la tranchée

du générateur de puissance

du rayon tracteur de l’Étoile

de la mort. C’est là qu’Obi-

Wan Kenobi a neutralisé

le rayon tracteur du

compartiment d’accostage

327, permettant ﬁnalement

au Millennium Falcon de

s’enfuir.

Cellule 2187

La cellule 2187 du bloc

de détention AA-23

est l’endroit où la

princesse Leia Organa

fut emprisonnée par

Darth Vader, soupçonnée

d’activités rebelles.

Rayon tracteur

Couplage du réacteur

Q : Y a-t-il une fonction spéciﬁque du modèle que tu as préféré créer ?

R :Le turbolaser à ressorts tireur de missiles à l’étage inférieur a été vraiment amusant à

concevoir, car je l’ai entièrement créé moi-même. J’ai aussi conçu une nouvelle fonction de gâchette

pour le tir, donc je suis vraiment ﬁer de cette partie. À part ça, j’aime aussi mes petites variations

sur les turbolasers du dernier étage. J’adore les tours à turbolaser dans l’attaque de

Star Wars :

Un nouvel espoir

, alors y mettre ma touche personnelle a été génial.

Q : Qu’est-ce qui est diérent dans cette version de l’ensemble de l’Étoile de la mort LEGO

Star Wars

par rapport à la précédente ?

R : Quelques grandes améliorations ont été faites à l’ascenseur du hangar, au laser tueur

de planètes, au turbolaser et au TIE X-1 Advanced de Darth Vader. De plus, de nombreux

changements plus subtils ont été eectués dans toute la station de combat.

Rencontre avec le designer du modèle

Q : L’Étoile de la mort LEGO

®

Star Wars

est l’une des stations de combat les plus reconnaissables

de tout l’univers

Star Wars

, célèbre pour sa forme ronde caractéristique. Comment as-tu

commencé à concevoir ce modèle ?

R :J’ai commencé par déterminer ce qui était génial dans la dernière version de l’Étoile de la mort,

et quels aspects pouvaient être actualisés. J’ai particulièrement étudié les diérentes fonctions pour

voir si elles pouvaient être améliorées. De plus, j’ai vraiment plongé dans l’expérience de construction

générale pour voir comment elle pouvait être améliorée et assurer que la construction de cet ensemble

soit une expérience formidable pour tout le monde.

Q : Quel type de matériel de référence as-tu utilisé pour commencer à concevoir l’Étoile de la mort ?

R : J’ai utilisé les deux ﬁlms comprenant les deux Étoiles de la mort (

Star Wars : Un nouvel espoir

et

Star Wars : Le retour du Jedi

), plus toutes les captures d’écran que j’ai pu créer ou trouver pour

obtenir une vue d’ensemble des salles et des scénarios.

Q : Quel type de techniques de construction utilises-tu fréquemment lors de la conception d’un

modèle à cette échelle ?

R : La stabilité est toujours un élément important pour nous quand nous concevons les modèles, mais

elle est renforcée davantage pour les modèles de cette taille, tout simplement en raison du poids et de

la taille du modèle. Il y a beaucoup de briques à empiler dans cet ensemble, il est donc très important

que les murs et les planchers soient stables. Ceci assure la stabilité du modèle pendant la phase de

construction et également ensuite, pendant la phase de jeu.

Q : L’une des meilleures caractéristiques de l’Étoile de la mort LEGO

Star Wars

sont les salles

à l’intérieur du modèle. Comment ont-elles inﬂuencé la création de ce modèle, qui doit être

fonctionnel tout en restant stable ?

R :Les salles venaient principalement de la version précédente du modèle, mais j’ai cependant travaillé

pour optimiser les murs et les planchers, aﬁn d’obtenir un meilleur processus de construction. La

stabilité des murs et des planchers est essentielle, car une fois qu’on commence à ajouter des

fonctions sur les murs et les planchers, cela diminue souvent la stabilité. S’assurer que le modèle n’a

aucun point faible (comme les oriﬁces d’échappement) tout en ajoutant de nombreuses fonctions de

jeu est vraiment important et constitue une grande partie du déﬁ posé par la construction d’un modèle

de ce type.

Niels Mølgård Frederiksen

20

de ce type.

La page est en cours de chargement...

Lego 75159 Star Wars Building Instructions

Ce manuel convient également à

Lego 75159 Star Wars Building Instructions

dans d''autres langues

Documents connexes

Autres documents